The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov5670 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports OF platforms only. The "clocks" property has always
been specified as mandatory in the DT bindings and the "clock-frequency"
property has never been allowed. The driver retrieves the clock and its
rate if present, and falls back to retrieving the rate from the
"clock-frequency" property otherwise. If the rate does not match the
expected rate, the driver fails probing. This is deprecated on OF
platforms, but behaves correctly on platforms that comply with the DT
bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on OF platforms that comply with the DT bindings.
Non-compliant platforms are not expected, but any regression could
easily be handled by switching to the devm_v4l2_sensor_clk_get_legacy()
helper designed to preserve non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock if
present, and retrieves the clock rate from the "clock-frequency"
property. If the rate does not match the expected rate, the driver fails
probing. This is correct behaviour for ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov2740 and access
it from there instead, to simplify the driver.
While at it, fix mistakes in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock if
present, and retrieves the clock rate from the "clock-frequency"
property. If the rate does not match the expected rate, the driver fails
probing. This is correct behaviour for ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov13b10 and
access it from there instead, to simplify the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock rate
from the "clock-frequency" property. If the rate does not match the
expected rate, the driver prints a warning. This is correct behaviour
for ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov13858 and
access it from there instead, to simplify the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI and OF platforms. The "clocks" property is
specified as mandatory in the DT bindings and the "clock-frequency"
property is not allowed. The driver retrieves the clock and its rate if
present, and falls back to retrieving the rate from the
"clock-frequency" property otherwise. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI, and for OF platforms that comply with the documented DT bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
The behaviour is also unchanged on OF platforms that comply with the DT
bindings. Non-compliant platforms are not expected, but any regression
could easily be handled by switching to the
devm_v4l2_sensor_clk_get_legacy() helper designed to preserve
non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov08x40 and
access it from there instead, to simplify the driver.
While at it, fix mistakes in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock rate
from the "clock-frequency" property. If the rate does not match the
expected rate, the driver prints a warning. This is correct behaviour
for ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov08d10 and
access it from there instead, to simplify the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI and OF platforms. The "clocks" property is
specified as mandatory in the DT bindings and the "clock-frequency"
property is not allowed. The driver retrieves the clock and its rate if
present, and falls back to retrieving the rate from the
"clock-frequency" property otherwise. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI, and for OF platforms that comply with the documented DT bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
The behaviour is also unchanged on OF platforms that comply with the DT
bindings. Non-compliant platforms are not expected, but any regression
could easily be handled by switching to the
devm_v4l2_sensor_clk_get_legacy() helper designed to preserve
non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov02e10 and
access it from there instead, to simplify the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI and OF platforms. The "clocks" property is
specified as mandatory in the DT bindings and the "clock-frequency"
property is not allowed. The driver retrieves the clock and its rate if
present, and falls back to retrieving the rate from the
"clock-frequency" property otherwise. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI, and for OF platforms that comply with the documented DT bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
The behaviour is also unchanged on OF platforms that comply with the DT
bindings. Non-compliant platforms are not expected, but any regression
could easily be handled by switching to the
devm_v4l2_sensor_clk_get_legacy() helper designed to preserve
non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct ov02c10 and
access it from there instead, to simplify the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI and OF platforms. The "clocks" property is
specified as mandatory in the DT bindings and the "clock-frequency"
property is not allowed. The driver retrieves the clock if present,
retrieves the clock rate from the "clock-frequency" property and falls
back to retrieving it from the clock. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI, and for OF platforms that comply with the documented DT bindings.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
The behaviour is also unchanged on OF platforms that comply with the DT
bindings. Non-compliant platforms are not expected, but any regression
could easily be handled by switching to the
devm_v4l2_sensor_clk_get_legacy() helper designed to preserve
non-compliant behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct og01a1b and
access it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock rate
from the "clock-frequency" property. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct imx355 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock rate
from the "clock-frequency" property. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct imx319 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock rate
from the "clock-frequency" property. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct imx208 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock rate
from the "clock-frequency" property. If the rate does not match the
expected rate, the driver fails probing. This is correct behaviour for
ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct hi847 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Several camera sensor drivers access the "clock-frequency" property
directly to retrieve the external clock rate, or modify the clock rate
of the external clock programmatically. Both behaviours are valid on
a subset of ACPI platforms, but are considered deprecated on OF
platforms, and do not support ACPI platforms that implement MIPI DisCo
for Imaging. Implementing them manually in drivers is deprecated, as
that can encourage cargo-cult and lead to differences in behaviour
between drivers. Instead, drivers should use the
devm_v4l2_sensor_clk_get() helper.
This driver supports ACPI platforms only. It retrieves the clock if
present, and retrieves the clock rate from the "clock-frequency"
property. If the rate does not match the expected rate, the driver fails
probing. This is correct behaviour for ACPI.
Switch to using the devm_v4l2_sensor_clk_get() helper. This does not
change the behaviour on ACPI platforms that specify a clock-frequency
property and don't provide a clock. On ACPI platforms that provide a
clock, the clock rate will be set to the value of the clock-frequency
property. This should not change the behaviour either as this driver
expects the clock to be set to that rate, and wouldn't operate correctly
otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct hi556 and access
it from there instead, to simplify the driver.
While at it, fix a mistake in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The ov6650 driver was introduced in v2.6.37 to support the OMAP1-based
Amstrad Delta video phone. The platform still has a board file in the
kernel, but support for the camera was dropped in commit ce548396a4
("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies")
in v5.9. The driver has been unused since as it has received neither
ACPI nor DT support.
The ov6650 driver is one of the last sensor drivers calling
clk_set_rate(). This is deprecated, and calls to the function are being
removed to avoid cargo-cult. As the driver is unlikely to ever be used
again, drop it instead of trying to avoid call clk_set_rate().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver retrieves the rate of the external at probe time, and then
reprograms that clock with the same rate when powering on the device.
Setting the clock rate is not needed, drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The last user of the mt9v032 driver through board files and platform
data has long been removed. Drop support for platform data from the
driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver needs to access the struct device in many places, and
retrieves it from the i2c_client itself retrieved with
v4l2_get_subdevdata(). Store it as a pointer in struct mt9v032 and
access it from there instead, to simplify the driver.
While at it, fix mistakes in the sort order of include statements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The mt9v022 driver got removed in commit e7eab49132 ("media:
staging/media/soc_camera: remove this driver"), but its platform header
file got left behind. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The sensor requires an external clock, and drivers need to access the
clock to retrieve its frequency in order to configure the sensor. This
makes usage of the clocks property mandatory for a system to work
properly. Mark the clocks and clock-names properties as required, and
update the example accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The sensor requires an external clock, and drivers need to access the
clock to retrieve its frequency in order to configure the sensor. This
makes usage of the clocks property mandatory for a system to work
properly. Mark the property as required.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Usage of the clock-frequency property for camera sensors is discouraged
in favour of using assigned-clock-rates (and assigned-clock-parents
where needed). Drop the property, and update the example accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Usage of the clock-frequency property for camera sensors is discouraged
in favour of using assigned-clock-rates (and assigned-clock-parents
where needed). Mark the property as deprecated.
Update the examples accordingly. In DT examples where the sensor input
clock appears to come from a programmable clock generator, replace
clock-frequency by the assigned-clocks and assigned-clock-rates
properties. Otherwise, just drop clock-frequency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a v4l2 subdevice driver for the Omnivision OV2735 sensor.
The Omnivision OV2735 is a 1/2.7-Inch CMOS image sensor with an
active array size of 1920 x 1080.
The following features are supported:
- Manual exposure an gain control support
- vblank/hblank control support
- Test pattern support control
- Supported resolution: 1920 x 1080 @ 30fps (SGRBG10)
Co-developed-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
[Sakari Ailus: Use container_of_const(), fix enum_bus_code condition.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
OmniVision OG0VE1B is a monochrome image sensor, which produces frames in
8/10-bit raw output format and supports 640x480, 400x400, 200x200 and
100x100 output image resolution modes.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for OmniVision OG0VE1B camera
sensor.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
OmniVision OV6211 is a monochrome image sensor, which produces frames in
8/10-bit raw output format and supports 400x400, 200x200 and 100x100
output image resolution modes.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for OmniVision OV6211 image
sensor.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The datasheet of ov08x40 doesn't match the hardware behavior.
0x3821[2] == 1 is the original state and 0 the horizontal flip enabled.
Signed-off-by: Hao Yao <hao.yao@intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Tested-by: Hans de Goede <hansg@kernel.org> # ThinkPad X1 Carbon Gen 12 & Gen 13
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The OmniVision OG01A1B image sensor is a monochrome sensor, it supports
8-bit and 10-bit RAW output formats only.
That said the planar greyscale Y8/Y10 media formats are more appropriate
for the sensor instead of the originally and arbitrary selected SGRBG one,
since there is no red, green or blue color components.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Jingjing's e-mail address no longer works, remove it from the driver.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The media_entity_remote_source_pad_unique() function never returns NULL,
it returns error pointers. Change this check from a NULL check to an
IS_ERR() check.
Fixes: 31f91c5224 ("media: ti: j721e-csi2rx: Support multiple pixels per clock")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Change "ret" from unsigned int to int type in dcmi_framesizes_init()
and dcmi_graph_notify_bound() to store negative error codes or zero
returned by v4l2_subdev_call() and media_create_pad_link() - this
better aligns with the coding standards and maintains code consistency.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use int instead of unsigned int for the 'ret' variable in csi2_init() to
store negative error codes or zero returned by media_entity_pads_init().
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Change "ret" from unsigned int to int type in mt9v111_calc_frame_rate()
to store negative error codes or zero returned by __mt9v111_hw_reset()
and other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Fixes: aab7ed1c39 ("media: i2c: Add driver for Aptina MT9V111")
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
