Provide helpers that program hardware gamma LUTs. Tha gamma ramp is
either provided by the driver or generated by the helper.
The DRM driver exports the GAMMA_LUT property with a fixed number of
entries per color component, such as 256 on 8-bit-wide components. The
entries describe the gamma ramp of each individual component. The new
helper drm_crtc_load_gamma_888() loads such gamma ramp to hardware. The
hardware uses each displayed pixel's individial components as indices
into the hardware gamma table.
For color modes with less than 8 bits per color component, the helpers
drm_crtc_load_gamma_565_from() and drm_crtc_load_gamma_555_from_888()
interpolate the provided gamma ramp to reduce it to the correct number
of entries; 5/6/5 for RGB565-like formats and 5/5/5 for XRGB1555-like
formats.
If no gamma ramp has been provided, drivers can use the new helper
drm_crtc_fill_gamma_888() to load a default gamma ramp with 256 entries
per color component. For color modes with less bits, the new helpers
drm_crtc_fill_gamma_565() and drm_crtc_fill_gamma_555() are available.
The default gamma ramp uses a gamma factor of 1.
For color modes with palette, drm_crtc_load_palette_8() load an 8-bit
palette into the hardware. If no palette has been specified,
drm_crtc_fill_palette_8() load a system-specific default palette. This
is currently only a grey-scale palette with increasing luminance, but
later patches can change this. For PCs, a VGA default palette could
be used.
v2:
- drop comment on gamma factor of 2.2 (Michel, Pekka)
- fix typos in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250520094203.30545-2-tzimmermann@suse.de
Let the user know what went wrong in drm_gem_fb_afbc_init
failure paths.
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250508084811.2472877-1-andyshrk@163.com
Replace open-coded mutex handling with cleanup.h guard(mutex). This
simplifies the code and removes the "goto unlock" pattern.
Tested with igt tests core_auth and core_setmaster.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250509142627.639419-1-andrealmeid@igalia.com
The LCD controller (LCDC) on the RZ/V2H(P) SoC is composed of Frame
Compression Processor (FCPVD), Video Signal Processor (VSPD), and
Display Unit (DU).
There is one LCDC unit available on the RZ/V2H(P) SoC which is connected
to the DSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250512182330.238259-3-prabhakar.mahadev-lad.rj@bp.renesas.com
The DU block on the RZ/V2H(P) SoC is identical to the one found on the
RZ/G2L SoC. However, it only supports the DSI interface, whereas the
RZ/G2L supports both DSI and DPI interfaces.
Due to this difference, a SoC-specific compatible string
'renesas,r9a09g057-du' is added for the RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250512182330.238259-2-prabhakar.mahadev-lad.rj@bp.renesas.com
When drm_panel.prepare_prev_first is set to true in a panel driver, the
panel expects the MIPI DSI hardware to be already configured before the
panel's prepare function is called because it might need to send DCS
commands.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250521210335.3149065-1-chris.brandt@renesas.com
devm_drm_put_bridge() is a temporary workaround waiting for the panel
bridge lifetime rework. Add a TODO entry to not forget it must be removed
after such rework.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-22-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
devm_drm_bridge_alloc() is the new API to be used for allocating (and
partially initializing) a private driver struct embedding a struct
drm_bridge.
For many drivers having a simple code flow in the probe function, this
commit does a mass conversion automatically with the following semantic
patch. The changes have been reviewed manually for correctness as well as
to find any false positives.
The patch has been applied with the explicit exclusion of bridge/panel.c,
handled by a separate patch.
After applying the semantic patch, manually fixed these issues:
- 4 drivers need ERR_CAST() instead of PTR_ERR() as the function calling
devm_drm_bridge_alloc() returns a pointer
- re-added empty lines and comments that the script had removed but that
should stay
@@
type T;
identifier C;
identifier BR;
expression DEV;
expression FUNCS;
@@
-T *C;
+T *C;
...
(
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return -ENOMEM;
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
|
-C = devm_kzalloc(DEV, ...);
-if (!C)
- return ERR_PTR(-ENOMEM);
+C = devm_drm_bridge_alloc(DEV, T, BR, FUNCS);
+if (IS_ERR(C))
+ return PTR_ERR(C);
)
...
-C->BR.funcs = FUNCS;
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> # microchip-lvds.c
Reviewed-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Tested-by: Douglas Anderson <dianders@chromium.org> # parade-ps8640
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-2-b8bc1f16d7aa@bootlin.com
[Luca: fixed trivial patch conflict in adv7511_drv.c while applying]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Add a helper to wrap OF-specific calls in drm_panel_add_follower() in
preparation for adding an ACPI equivalent in the future. No functional
changes.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250522100036.2529624-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Commit 5164553d73 ("drm/bridge: add devm_drm_put_bridge()") adds two
declarations for devm_drm_put_bridge():
1) an inline declaration in the #else branch of
'#if defined(CONFIG_OF)...'
2) one outside of the same #if
This results in a build failure with CONFIG_OF=n:
../drivers/gpu/drm/drm_bridge.c:1406:6: error: redefinition of ‘devm_drm_put_bridge’
The function has nothing to do with OF, thus fix by removing declaration 1.
Fixes: 5164553d73 ("drm/bridge: add devm_drm_put_bridge()")
Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Closes: https://oftc.catirclogs.org/dri-devel/2025-05-21#34288266;
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/20250522-devm_drm_put_bridge-fix-non-of-build-v1-1-a05234dea046@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
The devm lifetime management of this driver is peculiar. The underlying
device for the panel_bridge is the panel, and the devm lifetime is tied the
panel device (panel->dev). However the panel_bridge allocation is not
performed by the panel driver, but rather by a separate entity (typically
the previous bridge in the encoder chain).
Thus when that separate entity is destroyed, the panel_bridge is not
removed automatically by devm, so it is rather done explicitly by calling
drm_panel_bridge_remove(). This is the function that does devm_kfree() the
panel_bridge in current code, so update it as well to put the bridge
reference instead.
This is a temporary solution until the panel lifetime is reworked, which
should make this workaround unnecessary, so add a comment to clarify that.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-21-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Bridges obtained via devm_drm_bridge_alloc(dev, ...) will be put when the
requesting device (@dev) is removed.
However drivers which obtained them may need to put the obtained reference
explicitly. One such case is if they bind the devm removal action to a
different device than the one implemented by the driver itself and which
might be removed at a different time, such as bridge/panel.c.
Add devm_drm_put_bridge() to manually release a devm-obtained bridge in
such cases.
This function is considered only a temporary workaround until the panel
bridge is reworked and should be removed afterwards.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-20-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
This driver has a peculiar structure. zynqmp_dpsub.c is the actual driver,
which delegates to a submodule (zynqmp_dp.c) the allocation of a
sub-structure embedding the drm_bridge and its initialization, however it
does not delegate the drm_bridge_add(). Hence, following carefully the code
flow, it is correct to change the allocation function and .funcs assignment
in the submodule, while the drm_bridge_add() is not in that submodule.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-17-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
This driver allocates the DRM bridge separately from the main driver
private struct, which prevents using the new devm_drm_bridge_alloc()
API. Simplify the code by replacing the struct drm_bridge pointer with an
embedded struct drm_bridge inside the private struct, to make use of the
new API with the same code flow.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-16-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
Switching from a non-devm to a devm allocation allows removing the kfree()
in the remove function and in the probe error management code, and as a
consequence to simplify the code flow by removing now unnecessary gotos.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-13-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
Switching from a non-devm to a devm allocation allows removing the kfree()
in the remove function and in the probe error management code, and as a
consequence to simplify the code flow by removing now unnecessary gotos.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-12-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
Switching from a non-devm to a devm allocation allows removing the kfree()
in the remove function and in the probe error management code, and as a
consequence to simplify the code flow by removing now unnecessary gotos.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-11-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This is the new API for allocating DRM bridges.
Switching from a non-devm to a devm allocation allows removing the kfree()
in the remove function and in the probe error management code, and as a
consequence to simplify the code flow by removing now unnecessary gotos.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-10-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
