The overflow_work is using system wq to do overflow checks and updates
for PHC device timecounter, which might be overhelmed by other tasks.
But there is dedicated kthread in PTP subsystem designed for such
things. This patch changes the work queue to proper align with PTP
subsystem and to avoid overloading system work queue.
The adjfine() function acts the same way as overflow check worker,
we can postpone ptp aux worker till the next overflow period after
adjfine() was called.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
stmmac_rx_offset() is referenced in stmmac_main.c only,
let's move it to stmmac_main.c.
Drop the inline keyword by the way, it is better to let the compiler
to decide.
Compile tested only.
No functional change intended.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250107075448.4039925-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for RTL8125BP rev.b. Its XID is 0x689. This chip supports
DASH and its dash type is "RTL_DASH_25_BP".
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/20250107064355.104711-1-hau@realtek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Most of our tests use rtnetlink to read device stats, so they
don't expose the drivers much to paths in which device stats
are read under RCU. Add tests which hammer profcs reads to
make sure drivers:
- don't sleep while reporting stats,
- can handle parallel reads,
- can handle device going down while reading.
Set ifname on the env class in NetDrvEnv, we already do that
in NetDrvEpEnv.
KTAP version 1
1..7
ok 1 stats.check_pause
ok 2 stats.check_fec
ok 3 stats.pkt_byte_sum
ok 4 stats.qstat_by_ifindex
ok 5 stats.check_down
ok 6 stats.procfs_hammer
# completed up/down cycles: 6
ok 7 stats.procfs_downup_hammer
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250107022932.2087744-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-01-06 (igb, igc, ixgbe, ixgbevf, i40e, fm10k)
For igb:
Sriram Yagnaraman and Kurt Kanzenbach add support for AF_XDP
zero-copy.
Original cover letter:
The first couple of patches adds helper functions to prepare for AF_XDP
zero-copy support which comes in the last couple of patches, one each
for Rx and TX paths.
As mentioned in v1 patchset [0], I don't have access to an actual IGB
device to provide correct performance numbers. I have used Intel 82576EB
emulator in QEMU [1] to test the changes to IGB driver.
The tests use one isolated vCPU for RX/TX and one isolated vCPU for the
xdp-sock application [2]. Hope these measurements provide at the least
some indication on the increase in performance when using ZC, especially
in the TX path. It would be awesome if someone with a real IGB NIC can
test the patch.
AF_XDP performance using 64 byte packets in Kpps.
Benchmark: XDP-SKB XDP-DRV XDP-DRV(ZC)
rxdrop 220 235 350
txpush 1.000 1.000 410
l2fwd 1.000 1.000 200
AF_XDP performance using 1500 byte packets in Kpps.
Benchmark: XDP-SKB XDP-DRV XDP-DRV(ZC)
rxdrop 200 210 310
txpush 1.000 1.000 410
l2fwd 0.900 1.000 160
[0]: https://lore.kernel.org/intel-wired-lan/20230704095915.9750-1-sriram.yagnaraman@est.tech/
[1]: https://www.qemu.org/docs/master/system/devices/igb.html
[2]: https://github.com/xdp-project/bpf-examples/tree/master/AF_XDP-example
Subsequent changes and information can be found here:
https://lore.kernel.org/intel-wired-lan/20241018-b4-igb_zero_copy-v9-0-da139d78d796@linutronix.de/
Yue Haibing converts use of ERR_PTR return to traditional error code
which resolves a smatch warning.
For igc:
Song Yoong Siang allows for the XDP program to be hot-swapped.
Yue Haibing converts use of ERR_PTR return to traditional error code
which resolves a smatch warning.
Joe Damato adds sets IRQ and queues to NAPI instances to allow for
reporting via netdev-genl API.
For ixgbe:
Yue Haibing converts use of ERR_PTR return to traditional error code
which resolves a smatch warning.
For ixgbevf:
Yue Haibing converts use of ERR_PTR return to traditional error code
which resolves a smatch warning.
For i40e:
Alex implements "mdd-auto-reset-vf" private flag to automatically reset
VFs when encountering an MDD event.
For fm10k:
Dr. David Alan Gilbert removes an unused function.
====================
Link: https://patch.msgid.link/20250106221929.956999-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fm10k_iov_msg_mac_vlan_pf() has been unused since 2017's
commit 1f5c27e528 ("fm10k: use the MAC/VLAN queue for VF<->PF MAC/VLAN
requests")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-16-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link queues to NAPI instances via netdev-genl API so that users can
query this information with netlink. Handle a few cases in the driver:
1. Link/unlink the NAPIs when XDP is enabled/disabled
2. Handle IGC_FLAG_QUEUE_PAIRS enabled and disabled
Example output when IGC_FLAG_QUEUE_PAIRS is enabled:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'tx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'tx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'tx'}]
Since IGC_FLAG_QUEUE_PAIRS is enabled, you'll note that the same NAPI ID
is present for both rx and tx queues at the same index, for example
index 0:
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'},
To test IGC_FLAG_QUEUE_PAIRS disabled, a test system was booted using
the grub command line option "maxcpus=2" to force
igc_set_interrupt_capability to disable IGC_FLAG_QUEUE_PAIRS.
Example output when IGC_FLAG_QUEUE_PAIRS is disabled:
$ lscpu | grep "On-line CPU"
On-line CPU(s) list: 0,2
$ ethtool -l enp86s0 | tail -5
Current hardware settings:
RX: n/a
TX: n/a
Other: 1
Combined: 2
$ cat /proc/interrupts | grep enp
144: [...] enp86s0
145: [...] enp86s0-rx-0
146: [...] enp86s0-rx-1
147: [...] enp86s0-tx-0
148: [...] enp86s0-tx-1
1 "other" IRQ, and 2 IRQs for each of RX and Tx, so we expect netlink to
report 4 IRQs with unique NAPI IDs:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'id': 8196, 'ifindex': 2, 'irq': 148},
{'id': 8195, 'ifindex': 2, 'irq': 147},
{'id': 8194, 'ifindex': 2, 'irq': 146},
{'id': 8193, 'ifindex': 2, 'irq': 145}]
Now we examine which queues these NAPIs are associated with, expecting
that since IGC_FLAG_QUEUE_PAIRS is disabled each RX and TX queue will
have its own NAPI instance:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8195, 'type': 'tx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8196, 'type': 'tx'}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-15-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link IRQs to NAPI instances via netdev-genl API so that users can query
this information with netlink.
Compare the output of /proc/interrupts (noting that IRQ 128 is the
"other" IRQ which does not appear to have a NAPI instance):
$ cat /proc/interrupts | grep enp86s0 | cut --delimiter=":" -f1
128
129
130
131
132
The output from netlink shows the mapping of NAPI IDs to IRQs (again
noting that 128 is absent as it is the "other" IRQ):
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8196,
'ifindex': 2,
'irq': 132},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8195,
'ifindex': 2,
'irq': 131},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8194,
'ifindex': 2,
'irq': 130},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8193,
'ifindex': 2,
'irq': 129}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-14-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement "mdd-auto-reset-vf" priv-flag to handle Tx and Rx MDD events for VFs.
This flag is also used in other network adapters like ICE.
Usage:
- "on" - The problematic VF will be automatically reset
if a malformed descriptor is detected.
- "off" - The problematic VF will be disabled.
In cases where a VF sends malformed packets classified as malicious, it can
cause the Tx queue to freeze, rendering it unusable for several minutes. When
an MDD event occurs, this new implementation allows for a graceful VF reset to
quickly restore operational state.
Currently, VF queues are disabled if an MDD event occurs. This patch adds the
ability to reset the VF if a Tx or Rx MDD event occurs. It also includes MDD
event logging throttling to avoid dmesg pollution and unifies the format of
Tx and Rx MDD messages.
Note: Standard message rate limiting functions like dev_info_ratelimited()
do not meet our requirements. Custom rate limiting is implemented,
please see the code for details.
Co-developed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Co-developed-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-13-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbevf_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
ixgbevf_clean_rx_irq(). Remove this error pointer handing instead use
plain int return value.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-12-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbe_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
ixgbe_clean_rx_irq(). Remove this error pointer handing instead use
plain int return value.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
igb_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
igb_clean_rx_irq(). Remove this error pointer handing instead use plain
int return value.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
igc_xdp_run_prog() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
igc_clean_rx_irq(). Remove this error pointer handing instead use plain
int return value to fix this smatch warnings:
drivers/net/ethernet/intel/igc/igc_main.c:2533
igc_xdp_run_prog() warn: passing zero to 'ERR_PTR'
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver would always close and reopen the network interface
when setting/removing the XDP program, regardless of the presence of XDP
resources. This could cause unnecessary disruptions.
To avoid this, introduces a check to determine if there is a need to
close and reopen the interface, allowing for seamless hot-swapping of
XDP programs.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for AF_XDP zero-copy transmit path.
A new TX buffer type IGB_TYPE_XSK is introduced to indicate that the Tx
frame was allocated from the xsk buff pool, so igb_clean_tx_ring() and
igb_clean_tx_irq() can clean the buffers correctly based on type.
igb_xmit_zc() performs the actual packet transmit when AF_XDP zero-copy is
enabled. We share the TX ring between slow path, XDP and AF_XDP
zero-copy, so we use the netdev queue lock to ensure mutual exclusion.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Set olinfo_status in igb_xmit_zc() so that frames are transmitted,
Use READ_ONCE() for xsk_pool and check Tx disabled and carrier in
igb_xmit_zc(), Add FIXME for RS bit]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for AF_XDP zero-copy receive path.
When AF_XDP zero-copy is enabled, the rx buffers are allocated from the
xsk buff pool using igb_alloc_rx_buffers_zc().
Use xsk_pool_get_rx_frame_size() to set SRRCTL rx buf size when zero-copy
is enabled.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Port to v6.12 and provide napi_id for xdp_rxq_info_reg(),
RCT, remove NETDEV_XDP_ACT_XSK_ZEROCOPY, update NTC handling,
READ_ONCE() xsk_pool, likelyfy for XDP_REDIRECT case]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move XDP finalize and Rx statistics update into separate functions. This
way, they can be reused by the XDP and XDP/ZC code later.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following ring flag:
- IGB_RING_FLAG_TX_DISABLED (when xsk pool is being setup)
Add a xdp_buff array for use with XSK receive batch API, and a pointer
to xsk_pool in igb_adapter.
Add enable/disable functions for TX and RX rings.
Add enable/disable functions for XSK pool.
Add xsk wakeup function.
None of the above functionality will be active until
NETDEV_XDP_ACT_XSK_ZEROCOPY is advertised in netdev->xdp_features.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add READ/WRITE_ONCE(), synchronize_net(),
remove IGB_RING_FLAG_AF_XDP_ZC]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce igb_xdp_is_enabled() to check if an XDP program is assigned to
the device. Use that wherever xdp_prog is read and evaluated.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Split patches and use READ_ONCE()]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove static qualifiers on the following functions to be able to call
from XSK specific file that is added in the later patches:
- igb_xdp_tx_queue_mapping()
- igb_xdp_ring_update_tail()
- igb_clean_tx_ring()
- igb_clean_rx_ring()
- igb_xdp_xmit_back()
- igb_process_skb_fields()
While at it, inline igb_xdp_tx_queue_mapping() and
igb_xdp_ring_update_tail(). These functions are small enough and used in
XDP hot paths.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Split patches, inline small XDP functions]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: decode link types present in tests
Using a kernel built for the net selftest target to run drivers/net
tests currently fails, because the net kernel automatically spawns
a handful of tunnel devices which YNL can't decode.
Fill in those missing link types in rt_link. We need to extend subset
support a bit for it to work.
v1: https://lore.kernel.org/20250105012523.1722231-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250107022820.2087101-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some of our tests load vti and ip6tnl so not being able to decode
the link attrs gets in the way of using Python YNL for testing.
Decode link attributes for ip6tnl, vti and vti6.
ip6tnl uses IFLA_IPTUN_FLAGS as u32, while ipv4 and sit expect
a u16 attribute, so we have a (first?) subset type override...
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250107022820.2087101-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When parsing throws an exception one often has to figure out which
attribute couldn't be parsed from first principles. For families
with large message parsing trees like rtnetlink guessing the
attribute can be hard.
Print a bit of information as the exception travels out, e.g.:
# when dumping rt links
Error decoding 'flags' from 'linkinfo-ip6tnl-attrs'
Error decoding 'data' from 'linkinfo-attrs'
Error decoding 'linkinfo' from 'link-attrs'
Traceback (most recent call last):
File "/home/kicinski/linux/./tools/net/ynl/cli.py", line 119, in <module>
main()
File "/home/kicinski/linux/./tools/net/ynl/cli.py", line 100, in main
reply = ynl.dump(args.dump, attrs)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 1064, in dump
return self._op(method, vals, dump=True)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 1058, in _op
return self._ops(ops)[0]
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 1045, in _ops
rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 738, in _decode
subdict = self._decode(NlAttrs(attr.raw), attr_spec['nested-attributes'], search_attrs)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 763, in _decode
decoded = self._decode_sub_msg(attr, attr_spec, search_attrs)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 714, in _decode_sub_msg
subdict = self._decode(NlAttrs(attr.raw, offset), msg_format.attr_set)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 749, in _decode
decoded = attr.as_scalar(attr_spec['type'], attr_spec.byte_order)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 147, in as_scalar
return format.unpack(self.raw)[0]
struct.error: unpack requires a buffer of 2 bytes
The Traceback is what we would previously see, the "Error..."
messages are new. We print a message per level (in the stack
order). Printing single combined message gets tricky quickly
given sub-messages etc.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250107022820.2087101-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While merging net to net-next I noticed that the kdoc above
__vlan_get_protocol_offset() has the wrong function name.
Fix that and all the other kdoc warnings in this file.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250106174620.1855269-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: dsa: cleanup EEE (part 2)
This is part 2 of the DSA EEE cleanups, removing what has become dead
code as a result of the EEE management phylib now does.
Patch 1 removes the useless setting of tx_lpi parameters in the
ksz driver.
Patch 2 does the same for mt753x.
Patch 3 removes the DSA core code that calls the get_mac_eee() operation.
This needs to be done before removing the implementations because doing
otherwise would cause dsa_user_get_eee() to return -EOPNOTSUPP.
Patches 4..8 remove the trivial get_mac_eee() implementations from DSA
drivers.
Patch 9 finally removes the get_mac_eee() method from struct
dsa_switch_ops.
====================
Link: https://patch.msgid.link/Z3vDwwsHSxH5D6Pm@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The get_mac_eee() is no longer called by the core DSA code, nor are
there any implementations of this method. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllU-007UzL-KV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mv88e6xxx_get_mac_eee() is no longer called by the core DSA code.
Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllK-007Uz9-D7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mt753x_get_mac_eee() is no longer called by the core DSA code. Remove
it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/E1tUllF-007Uz3-95@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All implementations of get_mac_eee() now just return zero without doing
anything useful. Remove the call to this method in preparation to
removing the method from each DSA driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUlkz-007Uyl-UA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsa_user_get_eee() calls the DSA switch get_mac_eee() method followed
by phylink_ethtool_get_eee(), which goes on to call
phy_ethtool_get_eee(). This overwrites all members of the passed
ethtool_keee, which means anything written by the DSA switch
get_mac_eee() method will be discarded.
Remove setting any members in mt753x_get_mac_eee().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/E1tUlku-007Uyc-RP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsa_user_get_eee() calls the DSA switch get_mac_eee() method followed
by phylink_ethtool_get_eee(), which goes on to call
phy_ethtool_get_eee(). This overwrites all members of the passed
ethtool_keee, which means anything written by the DSA switch
get_mac_eee() method will be discarded.
Remove setting any members in ksz_get_mac_eee().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUlkp-007UyW-OR@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(un)?register_netdevice_notifier_dev_net() hold RTNL before triggering
the notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that move_netdevice_notifiers_dev_net() is assumed to be (but not
yet) protected by per-netns RTNL of both src and dst netns; we need to
convert wireless and hyperv drivers that call dev_change_net_namespace().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(un)?register_netdevice_notifier_net() hold RTNL before triggering the
notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that the per-netns netdev notifier is protected by per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The const struct ixgbevf_hv_mbx_ops was added in 2016 as part of
commit c6d45171d7 ("ixgbevf: Support Windows hosts (Hyper-V)")
but has remained unused.
The functions it references are still referenced elsewhere.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250105122847.27341-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit d7811e623d ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ30g5RUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIMfSwD5AceGwL4lOliAKuD+jt5FGBbR4Wag
HBn/16BGwMwfxMEBAP1UoXeo4gs6AawT+JcvZjwfNlXwdAiyAx9zY4MtvxoL
=TcTF
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2025-01-07
We've added 7 non-merge commits during the last 32 day(s) which contain
a total of 11 files changed, 190 insertions(+), 103 deletions(-).
The main changes are:
1) Migrate the test_xdp_meta.sh BPF selftest into test_progs
framework, from Bastien Curutchet.
2) Add ability to configure head/tailroom for netkit devices,
from Daniel Borkmann.
3) Fixes and improvements to the xdp_hw_metadata selftest,
from Song Yoong Siang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Extend netkit tests to validate set {head,tail}room
netkit: Add add netkit {head,tail}room to rt_link.yaml
netkit: Allow for configuring needed_{head,tail}room
selftests/bpf: Migrate test_xdp_meta.sh into xdp_context_test_run.c
selftests/bpf: test_xdp_meta: Rename BPF sections
selftests/bpf: Enable Tx hwtstamp in xdp_hw_metadata
selftests/bpf: Actuate tx_metadata_len in xdp_hw_metadata
====================
Link: https://patch.msgid.link/20250107130908.143644-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The skb_buff struct in br_is_nd_neigh_msg() is never modified. Mark it as
const.
Signed-off-by: Ted Chen <znscnchen@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250104083846.71612-1-znscnchen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima says:
====================
dev: Hold per-netns RTNL in register_netdev().
Patch 1 adds rtnl_net_lock_killable() and Patch 2 uses it in
register_netdev() and converts it and unregister_netdev() to
per-netns RTNL.
With this and the netdev notifier series [0], ASSERT_RTNL_NET()
for NETDEV_REGISTER [1] wasn't fired on a simplest QEMU setup
like e1000 + x86_64_defconfig + CONFIG_DEBUG_NET_SMALL_RTNL.
[0]: https://lore.kernel.org/netdev/20250104063735.36945-1-kuniyu@amazon.com/
[1]:
---8<---
diff --git a/net/core/rtnl_net_debug.c b/net/core/rtnl_net_debug.c
index f406045cbd0e..c0c30929002e 100644
--- a/net/core/rtnl_net_debug.c
+++ b/net/core/rtnl_net_debug.c
@@ -21,7 +21,6 @@ static int rtnl_net_debug_event(struct notifier_block *nb,
case NETDEV_DOWN:
case NETDEV_REBOOT:
case NETDEV_CHANGE:
- case NETDEV_REGISTER:
case NETDEV_UNREGISTER:
case NETDEV_CHANGEMTU:
case NETDEV_CHANGEADDR:
@@ -60,19 +59,10 @@ static int rtnl_net_debug_event(struct notifier_block *nb,
ASSERT_RTNL();
break;
- /* Once an event fully supports RTNL_NET, move it here
- * and remove "if (0)" below.
- *
- * case NETDEV_XXX:
- * ASSERT_RTNL_NET(net);
- * break;
- */
- }
-
- /* Just to avoid unused-variable error for dev and net. */
- if (0)
+ case NETDEV_REGISTER:
ASSERT_RTNL_NET(net);
+ break;
+ }
return NOTIFY_DONE;
}
---8<---
====================
Link: https://patch.msgid.link/20250104082149.48493-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Let's hold per-netns RTNL of dev_net(dev) in register_netdev()
and unregister_netdev().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rtnl_lock_killable() is used only in register_netdev()
and will be converted to per-netns RTNL.
Let's unexport it and add the corresponding helper.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In cases where the work done is less than the budget, `fbnic_poll` is
returning 0. This affects the tracing of `napi_poll`. Following is a
snippet of before and after result from `napi_poll` tracepoint. Instead,
returning the work done improves the manual tracing.
Before:
@[10]: 1
...
@[64]: 208175
@[0]: 2128008
After:
@[56]: 86
@[48]: 222
...
@[5]: 1885756
@[6]: 1933841
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250104015316.3192946-1-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for HTB Qdisc offload available in the Airoha EN7581
ethernet controller. EN7581 can offload only one level of HTB leafs.
Each HTB leaf represents a QoS channel supported by EN7581 SoC.
The typical use-case is creating a HTB leaf for QoS channel to rate
limit the egress traffic and attach an ETS Qdisc to each HTB leaf in
order to enforce traffic prioritization.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for ETS Qdisc offload available on the Airoha EN7581
ethernet controller. In order to be effective, ETS Qdisc must configured
as leaf of a HTB Qdisc (HTB Qdisc offload will be added in the following
patch). ETS Qdisc available on EN7581 ethernet controller supports at
most 8 concurrent bands (QoS queues). We can enable an ETS Qdisc for
each available QoS channel.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
