Move RX callback handling into the threaded handler. This is similar to
the TX side except that we explicitly mask the source interrupt in the
primary handler and unmask it in the threaded handler again after
success. This was done automatically in the TX part.
The masking/ unmasking can be removed from imx_mu_specific_rx() since it
already happens in the primary/ threaded handler before invoking the
channel specific callback.
Move RX channel handling into threaded handler.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Split the mailbox irq handling into a primary handler (imx_mu_isr()) and
a threaded handler (imx_mu_isr_th()). The primary handler masks the
interrupt event so the threaded handler can run without raising the
interrupt again.
The goal here is to invoke the mailbox core functions (such as
mbox_chan_received_data(), mbox_chan_txdone()) in preemptible context which is
made possible by using an threaded interrupt handler. This in turn means that
mailbox's client callbacks are invoked in preemptible context, too. This then
allows the mailbox client callback to skip an indirection via a workqueue if
it requries preemptible callback.
As a first step, prepare the logic and move TX handling part.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
imx_mu_specific_rx() masks channel 0 and unmasks it again at the end of
the function. Given that at startup the channel index got unmasked it
should do the right job.
This here either unmasks the actual channel or another one but should
have no impact given that it reverses its doing at the end.
Peng Fan commented here:
| For specific rx channel, whether it is i.MX8 SCU or i.MX ELE, actually there is
| only 1 channel as of now, but it seems better to use cp->idx in case more
| channels in future.
Use the channel index instead of zero.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The driver uses of_platform_populate() but does not remove the added
devices on removal. This can lead to "double devices" on module removal
followed by adding the module again.
Use devm_of_platform_populate() to remove the populated devices once the
parent device is removed.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime_enable(), remove manual pm_runtime_disable()
invocations and move the pm_runtime handling in probe before
devm_mbox_controller_register().
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
sashiko complained about possible teardown problem. The scenario
CPU 0 CPU 1
imx_mu_isr() imx_mu_shutdown()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx));
imx_mu_specific_rx()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0);
free_irq()
The RX event remains enabled because in this short window the RX event
was disabled in ->shutdown() while the interrupt was active and then
enabled again by the ISR while ->shutdown waited in free_irq().
This race requires timing and if happens can be problematic on shared
handlers if the "removed" channel triggers an interrupt. In this case
the irq-core will shutdown the interrupt with the "nobody cared"
message.
Introduce imx_mu_con_priv::shutdown to signal that the channel is
shutting down. This flag is set with the lock held (by
imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which
only enables the event if the channel has not been shutdown and
serialises on the same lock.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
imx_mu_generic_tx() for the IMX_MU_TYPE_TXDB_V2 type polls on a register
which may timeout and is recognized as an error. This error is siltently
dropped and not dropped to the caller.
Forward the error to the caller.
Fixes: b5ef17917f ("mailbox: imx: fix TXDB_V2 channel race condition")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Document the Inter-Processor Communication Controller on the Qualcomm
Maili Platform, which will be used to route interrupts across various
subsystems found on the SoC.
Signed-off-by: Chunkai Deng <chunkai.deng@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
During development, it is useful to see which mailboxes are currently
obtained. Use a seq-file in debugfs to list the currently registered
controllers and their used channels. Example output from a Renesas R-Car
X5H based system:
# cat /sys/kernel/debug/mailbox/mailbox_summary
189e0000.system-controller:
0: c1000000.mailbox_test_send_to_recv
1: c1000100.mailbox_test_recv_to_send
128: c1000100.mailbox_test_recv_to_send
129: c1000000.mailbox_test_send_to_recv
189e1000.system-controller:
4: scmi_dev.1
5: scmi_dev.2
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
If the optional startup() callbacks fails, we need to clear some states.
Currently, this is done by freeing the channel. This does, however, more
than needed which creates problems. Namely, it is calling the shutdown()
callback. This is totally not intuitive. No user expects that shutdown()
is called when startup() fails, similar to remove() not being called
when probe() fails. Currently, quite some mailbox users register the IRQ
in startup() and free them in shutdown(). These drivers will get a WARN
about freeing an already free IRQ. Other subtle issues could arise from
this unexpected behaviour.
To solve this problem, introduce a helper which does the minimal cleanup
and use it in both, in free_channel() and after startup() failed.
Link: https://sashiko.dev/#/patchset/20260402112709.13002-1-wsa%2Brenesas%40sang-engineering.com # second issue
Fixes: 2b6d83e2b8 ("mailbox: Introduce framework for mailbox")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
When the mailbox controller failed transmitting message, the error code
was only passed to the client's tx done handler and not to
mbox_send_message() in blocking mode. For this reason, the function could
return a false success. This commit resolves the issue by introducing the
tx status and checking it before mbox_send_message() returns.
This commit works with the premise that the multi-threads' access to a
channel in blocking mode is serialized by clients, not by the mailbox
APIs, since the current mbox_send_message() in blocking mode does not
support multi-threads.
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Unlike in non-blocking mode, multi-thread has not been supported in
blocking mode. This commit is to prevent clients from having wrong
assumption by explicitly specifying this fact to the API doc.
Signed-off-by: Joonwon Kang <joonwonkang@google.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
When the SOF audio driver fails to initialize (e.g. firmware boot
timeout), its devres unwind frees the snd_sof_dev object that the
mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback.
The mtk-adsp-mailbox shutdown clears the mailbox command registers
but leaves the IRQ line unmasked, so a late interrupt can still
queue a threaded handler after mbox_free_channel() had cleared
chan->cl, and mbox_chan_received_data() would then trigger UAF:
BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version
sof_ipc3_validate_fw_version
sof_ipc3_do_rx_work
sof_ipc3_rx_msg
mt8196_dsp_handle_request
mtk_adsp_ipc_recv
mbox_chan_received_data
mtk_adsp_mbox_isr
irq_thread_fn
Freed by task ...:
kfree
devres_release_all
really_probe
... (sof-audio-of-mt8196 probe failure)
The crash was observed roughly three seconds after the failed probe.
disable_irq() in shutdown and enable_irq() in startup. disable_irq()
also waits for any in-flight interrupts, so by the time
mbox_free_channel() proceeds to clear chan->cl no rx_callback can run.
In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked
between probe and the first client bind — otherwise an early interrupt
can crash on chan->cl == NULL in mbox_chan_received_data().
Fixes: af2dfa96c5 ("mailbox: mediatek: add support for adsp mailbox controller")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Leaving these dead definitions in place hides which registers are
actually being used by the hardware, making the driver harder to read
and maintain. Remove them to clean up the file.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Document the Inter-Processor Communication Controller on the Qualcomm
Hawi Platform, which will be used to route interrupts across various
subsystems found on the SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Document CPU Control Processor (CPUCP) mailbox controller for Qualcomm
Hawi SoCs. It is software compatible with X1E80100 CPUCP mailbox
controller hence fallback to it.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The Nord SoC CPUCP mailbox supports 16 IPC channels, compared to 3 on
x1e80100. The existing driver hardcodes the channel count via a
compile-time constant (APSS_CPUCP_IPC_CHAN_SUPPORTED), making it
impossible to support hardware with a different number of channels.
Introduce a qcom_cpucp_mbox_data per-hardware configuration struct that
carries the channel count, and retrieve it via of_device_get_match_data()
at probe time. Switch the channel array from a fixed-size member to a
dynamically allocated buffer sized from the hardware data. Update the
x1e80100 entry to supply its own data struct, and add a new Nord entry
with num_chans = 16.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Document CPUSS Control Processor (CPUCP) mailbox controller for Qualcomm
Nord SoC, which is compatible with X1E80100 CPUCP, even though it supports
more IPC channels.
Signed-off-by: Deepti Jaggi <deepti.jaggi@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
mpfs_mbox_inbox_isr() writes to the sysreg scb syscon, not the control
scb syscon, but checks for the presence of the latter. Ultimately this
makes little difference because if one syscon is present, both will be.
Fixes: a4123ffab9 ("mailbox: mpfs: support new, syscon based, devicetree configuration")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
- Add more functions to the remote allowed list
randconfig found more functions that are allowed for the remote code for
s390 and arm. Add them to the allowed list.
- Fix remote_test error path
If one of the simple ring buffers fails to load, the code is supposed to
rollback its initialized buffers. Instead of rolling back the buffers for
the failed load, it uses the global variable and rolls back all the
successfully loaded buffers.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCagm9FRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn0xAP0WSYmbUAGYnrq1o5L4EEM61ManFBfp
ta7dmx1Q5SYw6AEAtqbiH42VJZviAmajguyuL0cs9i9exFl+j4SaneejNwg=
=CLqK
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add more functions to the remote allowed list
randconfig found more functions that are allowed for the remote code
for s390 and arm. Add them to the allowed list.
- Fix remote_test error path
If one of the simple ring buffers fails to load, the code is supposed
to rollback its initialized buffers. Instead of rolling back the
buffers for the failed load, it uses the global variable and rolls
back all the successfully loaded buffers.
* tag 'trace-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix desc in error path for the trace remote test module
ring-buffer remote: Avoid unexpected symbol warnings (arm, s390)
When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST),
get_ext_report() allocates a buffer to retrieve a certificate blob from the
host, keeping track of its size in report_req->certs_len.
However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating
an invalid buffer size, as well as the expected length of such buffer.
get_ext_report() subsequently updates report_req->certs_len with the
host-controlled value, and cleans up the buffer by computing a page order
from such value. This is incorrect, as the host-provided length may not
match the page order of the original allocation, potentially resulting
in corruption in the page allocator.
Fix this by using alloc_pages_exact() instead, and reusing @npages to
compute the size passed to free_pages_exact(). For consistency, also
use @npages to compute the size when allocating the pages, even though
this last change has no functional effect.
Fixes: 3e385c0d6c ("virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Roth <michael.roth@amd.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix use-after-free in irq_work_single() on PREEMPT_RT
(Jiayuan Chen)
- Don't call add_interrupt_randomness() for NMIs
in handle_percpu_devid_irq() (Mark Rutland)
- Remove unused function in the ath79-cpu irqchip driver
causing LKP CI build warnings (Rosen Penev)
- Fix IRQ allocation/teardown leakage regressions in the GICv5
irqchip driver (Sascha Bischoff)
- Fix an IRQ trigger type regression in the Meson S4 SoC irqchip
driver (Xianwei Zhao)
- Fix CPU offlining regression in the RiscV IMSIC irqchip driver
(Yong-Xuan Wang)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rLcN
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ fixes from Ingo Molnar:
- Fix use-after-free in irq_work_single() on PREEMPT_RT (Jiayuan Chen)
- Don't call add_interrupt_randomness() for NMIs in
handle_percpu_devid_irq() (Mark Rutland)
- Remove unused function in the ath79-cpu irqchip driver causing LKP
CI build warnings (Rosen Penev)
- Fix IRQ allocation/teardown leakage regressions in the GICv5 irqchip
driver (Sascha Bischoff)
- Fix an IRQ trigger type regression in the Meson S4 SoC irqchip driver
(Xianwei Zhao)
- Fix CPU offlining regression in the RiscV IMSIC irqchip driver
(Yong-Xuan Wang)
* tag 'irq-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
irqchip/riscv-imsic: Clear interrupt move state during CPU offlining
irqchip/meson-gpio: Use the correct register in meson_s4_gpio_irq_set_type()
irqchip/ath79-cpu: Remove unused function
genirq/chip: Don't call add_interrupt_randomness() for NMIs
irqchip/gic-v5: Allocate ITS parent LPIs as a range
irqchip/gic-v5: Support range allocation for LPIs
irqchip/gic-v5: Move LPI allocation into the LPI domain
- Disable satp register probing when no5lvl is specified on the kernel
command line
- Fix a CFI-related issue with the misaligned access speed measurement
code
- Reduce the CFI shadow stack size limit from 4GB to 2GB (following
ARM64 GCS)
- Prevent the kernel from requesting delegation of misaligned access
faults unless a new Kconfig option,
CONFIG_RISCV_SBI_FWFT_DELEGATE_MISALIGNED, is enabled. This will
depend on CONFIG_NONPORTABLE until the deficiencies of the kernel
misaligned access fixup code are fixed
- Fix some potential uninitialized memory accesses in error paths in
compat_riscv_gpr_set() and compat_restore_sigcontext()
- Fix a bug in the RISC-V MIPS vendor errata patching code where a
logical-and was used in place of a bitwise-and
- Drop some unnecessary code in riscv_fill_hwcap_from_isa_string()
- Use macros for isa2hwcap indices in riscv_fill_hwcap(), rather than
open-coding them
- Fix some documentation typos (one affecting "make htmldocs")
-----BEGIN PGP SIGNATURE-----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=yOtI
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Relatively low-impact fixes. Probably the most notable one is that we
no longer ask the monitor-mode firmware to delegate misaligned access
handling to the kernel by default, since the kernel code needs
significant improvement to match the functionality of the firmware.
This change avoids functional problems at some cost in performance,
but shouldn't affect any system with misaligned access handling in
hardware.
- Disable satp register probing when no5lvl is specified on the
kernel command line
- Fix a CFI-related issue with the misaligned access speed
measurement code
- Reduce the CFI shadow stack size limit from 4GB to 2GB (following
ARM64 GCS)
- Prevent the kernel from requesting delegation of misaligned access
faults unless a new Kconfig option, RISCV_SBI_FWFT_DELEGATE_MISALIGNED,
is enabled. This will depend on CONFIG_NONPORTABLE until the
deficiencies of the kernel misaligned access fixup code are fixed
- Fix some potential uninitialized memory accesses in error paths in
compat_riscv_gpr_set() and compat_restore_sigcontext()
- Fix a bug in the RISC-V MIPS vendor errata patching code where a
logical-and was used in place of a bitwise-and
- Drop some unnecessary code in riscv_fill_hwcap_from_isa_string()
- Use macros for isa2hwcap indices in riscv_fill_hwcap(), rather than
open-coding them
- Fix some documentation typos (one affecting 'make htmldocs')"
* tag 'riscv-for-linus-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: misaligned: Make enabling delegation depend on NONPORTABLE
riscv: Docs: fix unmatched quote warning
riscv: cfi: reduce shadow stack size limit from 4GB to 2GB
riscv: cpufeature: Use pre-defined ISA ext macros to index isa2hwcap
riscv: mm: Fixup no5lvl failure when vaddr is invalid
riscv: Fix register corruption from uninitialized cregs on error
riscv: errata: Fix bitwise vs logical AND in MIPS errata patching
Documentation: riscv: cmodx: fix typos
riscv: cpufeature: Drop this_hwcap clear in T-Head vector workaround
riscv: Define __riscv_copy_{,vec_}{words,bytes}_unaligned() using SYM_TYPED_FUNC_START
During initialisation in remote_test_load(), if one of the
simple_ring_buffer fails to initialise, the error path attempts to
rollback initialised buffers. However, the rollback incorrectly uses the
global pointer to the trace descriptor, which is only set upon
successful load completion. Fix the error path by using the local
pointer to the descriptor.
Link: https://patch.msgid.link/20260515201616.337469-1-vdonnefort@google.com
Fixes: ea908a2b79 ("tracing: Add a trace remote module for testing")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
base-commit: 5d6919055d
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Sashiko reports:
lm90_alert() executes in the smbus alert context and calls
lm90_update_confreg() to disable the hardware alert line, without
acquiring hwmon_lock.
Concurrently, sysfs write operations (such as lm90_write_convrate) hold
the hwmon_lock, temporarily modify data->config, and then restore it.
If an alert interrupt occurs concurrently with a sysfs write, the sysfs
path will overwrite the alert handler's modifications to data->config
and the hardware register.
This unintentionally re-enables the hardware alert line while the alarm is
still active, causing an interrupt storm.
Add the missing lock to lm90_alert() to solve the problem.
Fixes: 7a1d220ccb ("hwmon: (lm90) Introduce function to update configuration register")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
In lm90_probe(), the devm action to cancel the alert_work and report_work
(lm90_restore_conf) is registered in lm90_init_client() before
devm_hwmon_device_register_with_info() is called.
Because devm executes cleanup actions in reverse order during module
unbind or probe failure, the hwmon device is unregistered and freed first.
If lm90_alert_work() or lm90_report_alarms() runs in the window between
the hwmon device being freed and the delayed works being cancelled,
lm90_update_alarms() will dereference the freed data->hwmon_dev here.
Fix the problem by canceling the workers separately after registering
the hwmon device and before registering the interrupt handler. This ensures
that the workers are canceled after interrupts are disabled and before
the hwmon device is released. Add "shutdown" flag to indicate that device
shutdown is in progress to prevent workers from being re-armed.
Fixes: f6d0775119 ("hwmon: (lm90) Rework alarm/status handling")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
core:
- fix for the fix for the handle change race.
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
amdgpu:
- Userq fixes
- DCN 3.2 fix
- RAS fix
- GC 12 fix
gma500:
- oaktrail_lvds: fix i2c handling
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly
-----BEGIN PGP SIGNATURE-----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=eHJD
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes pull, small and all over fixes, mostly xe and amdgpu,
with some ttm and a core fix for the handle change pain.
core:
- fix for the fix for the handle change race
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
amdgpu:
- Userq fixes
- DCN 3.2 fix
- RAS fix
- GC 12 fix
gma500:
- oaktrail_lvds: fix i2c handling
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly"
* tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm: Replace old pointer to new idr
drm/loongson: Use managed KMS polling
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
drm/ttm: Convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
drm/gma500/oaktrail_lvds: fix i2c adapter leaks on init
drm/gma500/oaktrail_lvds: fix hang on init failure
drm/gma500/oaktrail_hdmi: fix i2c adapter leak on setup
drm/xe: Drop unused ggtt_balloon field
accel/qaic: Add overflow check to remap_pfn_range during mmap
drm/i915/dp: Fix VSC dynamic range signaling for RGB formats
drm/i915: skip __i915_request_skip() for already signaled requests
drm/bridge: imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
drm/amdgpu/gfx_v12_0: set gfx.rs64_enable from PFP header on GFX12
drm/amd/ras: Fix CPER ring debugfs read overflow
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
drm/amdgpu: fix userq hang detection and reset
drm/amdgpu: remove almost all calls to amdgpu_userq_detect_and_reset_queues
drm/amdgpu: rework amdgpu_userq_signal_ioctl v3
drm/amdgpu: remove deadlocks from amdgpu_userq_pre_reset
drm/xe/dma-buf: fix UAF with retry loop
...
Commit 5e28b7b944 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
[1]
!RB_EMPTY_ROOT(&prime_fpriv->dmabufs)
WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833
Call Trace:
drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438
Fixes: 5e28b7b944 ("drm: Set old handle to NULL before prime swap in change_handle")
Reported-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7c9eed171647e421013
Cc: stable@vger.kernel.org
Tested-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/tencent_C267296443AAA4567771176886DFF364A305@qq.com
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmoHWpoACgkQa9axLQDI
XvH59xAAoxW8Z38Afcu1xClSNkPhEdFfSqUlltnu8AI8O8C2zKxKRe4mDM8P3+BS
Z216LKRLQE0SmUi+uvNS+E7V1Hq7EfQrJR3hyo0kx+DYH7uV9XiK7/PwLx1t929W
x0ard8Lj+S1ZSYvUA04GpNUjzrzsogiLsykMUYNSkhf9xaBvXqFN0q3H+Yeppfdq
axntNUFH0sq5irPD3zc20N6a+QUWrNVA9lemEwmIXoXwT0KYIasMg9SXfFdrJuEx
JedRii8hW4xcwF0brGKm0o6QCfa73XZpytp/uMdN2b0paisBnY8qCZ61HPfixS/W
Q8XBMFRDK2oOmUlf955nGEcLrMYIZsqXWqXU3vDdUKNUo99TAgYW8U7MArKvexxT
ICYhlHuPUSiIEtL+akS6Y4VlEpOlCIXo8VAeAzdaIio+9pM+UE5gm7+Bj0ZTShIp
7kZZbz1XBpb2yPf5soU8lDLxzB7krUlONKU58FVeug9yCwYBMATTq1EBgXz5ax71
2euaKnuqj7Kd7rhqa9HWtBxAW7wIPlG8Qq0E6qobkehwpuSyE4YQL0GHc9glxaCh
g9Y3SKtCVR1KQN9gghlI0gSwHXVVsQ80qnBbDcjR/0rQDHB/FOVZqDUe3YnSinjJ
sty0fS2UcRURSiNrmawVZoab36REwZaQFm1+8Z+hkdM5XEUiXZg=
=mkSZ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 MPAM fixes from Catalin Marinas:
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: Check whether the config array is allocated before destroying it
arm_mpam: Fix false positive assert failure during mpam_disable()
arm_mpam: Improve check for whether or not NRDY is hardware managed
arm_mpam: Pretend that NRDY is always hardware managed
arm_mpam: Fix monitor instance selection when checking for hardware NRDY
Including:
- AMD-Vi:
- Add bounds checks to debugfs and table lookups
- Intel VT-d:
- Apply an existing quirk for Q35 graphic device.
- Skip dev_pasid teardown for the blocked domain to avoid out-of-bounds
access.
- Return early if dev_pasid is missing to prevent NULL dereference or
UAF.
- Core:
- Fix bugs and corner cases in the pci_dev_reset_iommu_prepare/done()
code. This are some bigger changes including some re-work,
hopefully okay for -rc.
- Fix various issues found by AI in iommupt code.
- MAINTAINERS email address update for RISCV IOMMU.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmoHXUEACgkQK/BELZcB
GuPO/xAA08dYVCqMf2q9s3mBdKSc7ob5RxMoEpydBv2cBYjYx6FVCzPKRH3MFFM2
Q8EbpIHx0Ga75fTLCj6zJCvCMqEOB8g+6P0GgELBqqxINdkP9i+AoeY8mPKBS/hV
BMZJCU8GuZVYRNzjda775UOdLV6QvnR9vV8NrxkJ3L6kZh88suDNS6dGYhiJ8tZh
8j5ZoaYJp0gEnHQlIOPGAliC4pVp2rwFAl/Ox+PDqXoQ1FoHYssTKWDZaf2jGXYi
e0wwp5gIsv9HUnjBSB4GGQ2oxR5fr2+60b7lbYvNngYznxDYfmOJMGP7FoEb0u0K
VWZnPECc3ttiDES7/GC6hhRy79JvSgSDY57eoB82Ci1bdUdrEqTecg6BZ/OeVprw
u6vQUOffAdQR8Ou2RnKmm2B+42hBWYZk+JtxT6bEAzoNAgjfYT2C1fk5YJUNmYHD
ejuRUyIQ5MzgiLv1WfEHY5Skjk4ikkZObh+6DFd6nILpOGWxwzx6KZZn/UcYhFm0
Qj6E7uYNmP0BPkR9orlttKIRldfpyvlq6IONe9lc0GY+dRkIW7ZeSsjPOGW8NK6C
IfN7NAjs8jVfskhJjT8jgzMkMggeDB6rx2qCU1zMPXYgGA7MLOBu8SAVVZAnXMPy
qLo9K41wPAxbycdl2Zo16oFjMaBUStJ7N+K/ixVjtZgQb5BHQaw=
=k+yc
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"This is probably the largest fixes pull-request ever sent for IOMMU. I
partially blame it on AI code review which found some issues but there
is also some rework in here to fix issues in the iommu parts of PCI
device reset.
AMD-Vi:
- Add bounds checks to debugfs and table lookups
Intel VT-d:
- Apply an existing quirk for Q35 graphic device
- Skip dev_pasid teardown for the blocked domain to avoid
out-of-bounds access
- Return early if dev_pasid is missing to prevent NULL dereference
or UAF
Core:
- Fix bugs and corner cases in pci_dev_reset_iommu_prepare/done()
- Fix various issues found by AI in iommupt code
MAINTAINERS email address update for RISCV IOMMU"
* tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: update Tomasz Jeznach's email address
iommupt: Fix the end_index calculation in __map_range_leaf()
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
iommu: Handle unmap error when iommu_debug is enabled
iommu: Fix up map/unmap debugging for iommupt domains
iommu: Fix loss of errno on map failure for classic ops
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
iommu/vt-d: Fix oops due to out of scope access
iommu/vt-d: Disable DMAR for Intel Q35 IGFX
iommu: Warn on premature unblock during DMA aliased sibling reset
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
iommu: Fix ATS invalidation timeouts during __iommu_remove_group_pasid()
iommu: Fix nested pci_dev_reset_iommu_prepare/done()
iommu: Fix pasid attach in pci_dev_reset_iommu_prepare/done()
iommu: Replace per-group resetting_domain with per-gdev blocked flag
iommu: Fix kdocs of pci_dev_reset_iommu_done()
iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done()
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
- Convert vfio-pci BAR resource requests and iomaps initialization
from a lazy, on-demand model to an eager pre-allocation model to
avoid races while preserving legacy error behavior. Fix unchecked
barmap access in dma-buf export path. (Matt Evans)
- Introduce an implicit unsigned cast in converting vfio-pci device
offsets to region indexes, closing a potential out-of-bounds
access through the vfio_pci_ioeventfd() interface. (Matt Evans)
- Fix a dma-buf kref underflow and stuck wait_for_completion() when
closing a previously revoked dma-buf. (Alex Williamson)
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEQvbATlQL0amee4qQI5ubbjuwiyIFAmoHU9QRHGFsZXhAc2hh
emJvdC5vcmcACgkQI5ubbjuwiyIp6xAAqu4qVp1IsMj5jgG3S3aFFpTSAwpHPvu6
A/U99/pmniU/F714kujKyWS+w75k2L9De3T+u0numQ5qrrF8MDcyzVHGxuWSolHL
h2Y2D74zCS2J9q6VGW9VU7isplitjEYLgC/eXwmfaZ5YBH/No2KurCbYXowSjuMU
BQTgjvoT9tsj5AOcVhdladImuwf7SZ+8CvxHE3seybDmb8EDjWTgNgU7F1PNblEG
Bx2sSa7zLgRzmsh8R78lqKeknrRSLi3IIW4RqWXNRA5+z9Cs3Ibd9a2zCu8yFuj6
7FInwh3EBKrHGCpZiom5VhYRUojVk+rOMQOTIXepucn6igZmSJWirUJneF7LmbNm
bUxzZZn9DHzFupl9CuzXLW+C2A0ZQVCXJ6rPxAbBPeguWIZvRKUS48l4RFaknPzY
wEOEeBZQgzcxwNj4P7ji0rJOT8taa2C4Hh8Fada1D5zS7ITavMNkAMm0M5DsH2So
85rTYMN2pPPUos16oWkhvPgRJRMwBRR2yB+XH/joFN3Y9QbGG0nhkARe9mbD+FE8
KyBw+pNpwuQCDqqXboxiQrEP9jEMCf/16KrUNpHgqyNvcfmX316jtONWYGJunDu9
yYgMQlpuxssy8Z3542CA+QWGt+hwmzr5MlVlTzaG8C1uWfpkoOqaJBVuFyza1OxV
2C/XRHcEB8E=
=2Sn8
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Convert vfio-pci BAR resource requests and iomaps initialization
from a lazy, on-demand model to an eager pre-allocation model to
avoid races while preserving legacy error behavior. Fix unchecked
barmap access in dma-buf export path (Matt Evans)
- Introduce an implicit unsigned cast in converting vfio-pci device
offsets to region indexes, closing a potential out-of-bounds
access through the vfio_pci_ioeventfd() interface (Matt Evans)
- Fix a dma-buf kref underflow and stuck wait_for_completion() when
closing a previously revoked dma-buf (Alex Williamson)
* tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check BAR resources before exporting a DMABUF
vfio/pci: Set up BAR resources and maps in vfio_pci_core_enable()
vfio/pci: Make VFIO_PCI_OFFSET_TO_INDEX() return unsigned
vfio/pci: fix dma-buf kref underflow after revoke
that could lead to OOM kills in CephFS and a number of miscellaneous
fixes from Raphael and Slava. All but two are marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmoHWPETHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi8SVB/9naVkGM41Vb98EDywE0TPOY2uzKUDC
RW6pxTCtfbJbnqB+L3HuahbKYXz44h/WPk5Gl4+jO8FvizUz75CkwwjTLsPpGbpe
lgmSISrNFtWtYUS+9/X0x+I5BHz4EwX9sKclniizQ7Uick6SQWaPNhPvxiwEWpko
DnAv9T/dYP7Z5Y7RBNhAFrNgsOQh5qpjoJvZMmvLrzAoKROaWKEzc6G5FIOaoRRu
XolZ2KNnCD0kdN2r66LZFEIE+DpIwrrJ1M6geLwb9LyQ5pwcyCYKPz3AHAqjpBI1
TYXRl2ocMeciJFO0FeLGqpfGy2wcDxwc/ndWK6T/LWnelEfgm3qFZzqE
=KnhJ
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-7.1-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"An important patch from Hristo that squashes a folio reference leak
that could lead to OOM kills in CephFS and a number of miscellaneous
fixes from Raphael and Slava.
All but two are marked for stable"
* tag 'ceph-for-7.1-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential null-ptr-deref in decode_choose_args()
libceph: handle rbtree insertion error in decode_choose_args()
libceph: Fix potential out-of-bounds access in osdmap_decode()
ceph: put folios not suitable for writeback
ceph: add ceph_has_realms_with_quotas() check to ceph_quota_update_statfs()
libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()
ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size
ceph: fix a buffer leak in __ceph_setxattr()
libceph: Fix unnecessarily high ceph_decode_need() for uniform bucket
libceph: Fix potential out-of-bounds access in crush_decode()
-----BEGIN PGP SIGNATURE-----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=Q5Hr
-----END PGP SIGNATURE-----
Merge tag 'for-7.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixup warning when allocating memory for readahead, __GFP_NOWARN was
accidentally dropped when setting mapping constraints
- in tracepoint of file sync, fix sleeping in atomic context when
handling dentries
- harden initial loading of block group on crafted/fuzzed images,
iterate all chunk mapping entries unconditionally
- fix freeing pages of submitted io after checking for errors
- fix incorrect inode size after remount when using fallocate KEEP_SIZE
mode (also requires disabled 'no-holes' feature)
* tag 'for-7.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix incorrect i_size after remount caused by KEEP_SIZE prealloc gap
btrfs: only release the dirty pages io tree after successful writes
btrfs: tracepoints: fix sleep while in atomic context in btrfs_sync_file()
btrfs: always pass __GFP_NOWARN from add_ra_bio_pages()
btrfs: fix check_chunk_block_group_mappings() to iterate all chunk maps
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCagc+5gAKCRBcsMJ8RxYu
YzpAAYDu3tfcjmoypj+s5aUuAI9zbjB1UNbcJkVgtiyv5tn5+A14Y3NADvcyMJhi
kZj3/T4BgKmemTPlPjaOSG+zznu11cZSL7dRHQY56hATQwCrY4IS9s/fi80PnV+e
SG1PpVRKcA==
=buSz
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-7.1-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"A few bug fixes, nothing really special stands out"
* tag 'xfs-fixes-7.1-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Fix typo in comment
xfs: fix the "limiting open zones" message
xfs: flush delalloc blocks on ENOSPC in xfs_trans_alloc_icreate
xfs: check da node block pad field during scrub
xfs: fix memory leak for data allocated by xfs_zone_gc_data_alloc()
xfs: fix memory leak on error in xfs_alloc_zone_info()
xfs: check directory data block header padding in scrub
xfs: zero directory data block padding on write verification
xfs: zero entire directory data block header region at init
xfs: remove the meaningless XFS_ALLOC_FLAG_FREEING
Issues reported with v7.1-rc:
- Correctness fix for the new sunrpc cache netlink protocol
Issues that need expedient stable backports:
- Correctness fixes for delegated attributes
- Prevent an infinite loop when revoking layouts
-----BEGIN PGP SIGNATURE-----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=6XME
-----END PGP SIGNATURE-----
Merge tag 'nfsd-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Fixes for this release:
- Correctness fix for the new sunrpc cache netlink protocol
Marked for stable:
- Correctness fixes for delegated attributes
- Prevent an infinite loop when revoking layouts"
* tag 'nfsd-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix infinite loop in layout state revocation
sunrpc: start cache request seqno at 1 to fix netlink GET_REQS
nfsd: update mtime/ctime on COPY in presence of delegated attributes
nfsd: update mtime/ctime on CLONE in presense of delegated attributes
nfsd: fix file change detection in CB_GETATTR
nfsd: fix GET_DIR_DELEGATION when VFS leases are disabled
-----BEGIN PGP SIGNATURE-----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=6rcw
-----END PGP SIGNATURE-----
Merge tag 'block-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe merge request via Keith:
- Fix memory leak on a passthrough integrity mapping failure (Keith)
- Hide secrets behind debug option (Hannes)
- Fix pci use-after-free for host memory buffer (Chia-Lin Kao)
- Fix tcp taregt use-after-free for data digest (Sagi)
- Revert a mistaken quirk (Alan Cui)
- Fix uevent and controller state race condition (Maurizio)
- Fix apple submission queue re-initialization (Nick Chan)
- Three fixes for blk-integrity, fixing an issue with the user data
mapping and two problems with recomputing number of segments
- Two fixes for the iov_iter bounce buffering
- Fix for the handling of dead zoned write plugs
- ublk max_sectors validation fix, with associated selftest addition
* tag 'block-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
nvme-apple: Reset q->sq_tail during queue init
block: align down bounces bios
block: pass a minsize argument to bio_iov_iter_bounce
selftests: ublk: cap nthreads to kernel's actual nr_hw_queues
block: fix handling of dead zone write plugs
block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user()
block: recompute nr_integrity_segments in blk_insert_cloned_request
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
nvme: fix race condition between connected uevent and STARTED_ONCE flag
Revert "nvme: add quirk NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808"
nvmet-tcp: Fix potential UAF when ddgst mismatch
nvme-pci: fix use-after-free in nvme_free_host_mem()
nvmet-auth: Do not print DH-HMAC-CHAP secrets
nvme: fix bio leak on mapping failure
nvme: make prp passthrough usage less scary
ublk: reject max_sectors smaller than PAGE_SECTORS in parameter validation
-----BEGIN PGP SIGNATURE-----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=9orn
-----END PGP SIGNATURE-----
Merge tag 'io_uring-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Small series sanitizing the locking done for either modifying or
reading a chain of requests
- If the application has a pid namespace, ensure that the sqthread pid
is correctly printed in fdinfo
- Fix for a hashing issue in the io-wq thread pool, which could lead to
a use-after-free
- Kill dead argument from io_prep_rw_pi()
- Fix for a missed validation of the CQ ring head, affecting CQE refill
* tag 'io_uring-7.1-20260515' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: validate user-controlled cq.head in io_cqe_cache_refill()
io-wq: check that the predecessor is hashed in io_wq_remove_pending()
io_uring/rw: drop unused attr_type_mask from io_prep_rw_pi()
io_uring: hold uring_lock across io_kill_timeouts() in cancel path
io_uring: defer linked-timeout chain splice out of hrtimer context
io_uring: hold uring_lock when walking link chain in io_wq_free_work()
io_uring/fdinfo: translate SqThread PID through caller's pid_ns
