for 6.1, please pull the following:
- Rafal improves the BCM5301X PCIe DT nodes schema validation by
flagging the PCIe controller with a missing "device_type" property
- William merges BCM4908 within BCMBCA since this chip is part of the
Broadcom Broadband Carrier Access group and follows the architecture of
those chips
-----BEGIN PGP SIGNATURE-----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=JcYR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4L+j
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.1/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoC Device Tree updates
for 6.1, please pull the following:
- Rafal improves the BCM5301X PCIe DT nodes schema validation by
flagging the PCIe controller with a missing "device_type" property
- William merges BCM4908 within BCMBCA since this chip is part of the
Broadcom Broadband Carrier Access group and follows the architecture of
those chips
* tag 'arm-soc/for-6.1/devicetree' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
arm64: dts: Add BCM4908 generic board dts
arm64: dts: Move BCM4908 dts to bcmbca folder
arm64: dts: bcmbca: update BCM4908 board dts files
dt-bindings: arm64: bcmbca: Update BCM4908 description
dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
ARM: dts: BCM5301X: Add basic PCI controller properties
Link: https://lore.kernel.org/r/20220915023044.2350782-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Highlights:
----------
- MPU:
- General:
- Add I2C support (5 instances) on STM32MP13.
- Add SPI support (5 instabces) on STM32MP13.
- Add timer interrupts support on STM32MP15.
- ST boards:
- Enable I2C1 and I2C5 on stm32mp135f-dk board.
- Add SPI5 on stm32mp135f-dk board but disabled as only available on
the GPIO expansion connector.
- ARGON:
- Remove spidev node as not used by the code.
-----BEGIN PGP SIGNATURE-----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=QRRi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMfQ8QACgkQmmx57+YA
GNne/g//blaPR87ylFXix1Zj95pKZIN0HuXZ80/87Wwyn6imylmV+z66PifcftCS
wl/1HEu9OfHwMDES5yIXlcOAUWolLbbkBv53DF09EwOP9Hs9zy4dvc0qiZ3RVn9b
28O8P3JmNisTkGYABSf9FVlZAVVYPRKzURRCFYPe+ybznbjzlBmUtAdow3AC3Uwt
bHv6B5BLqVzLENKj3DaPiRmhQ+sC/oG5VsrvjbmYRS4rVa//34cK44Z7kMfdn7tQ
Av/BWbCmgZrpa5tvmILgz5uD240GZ4rsLrz73LJVMJ5+rnnc1GXRfK6TKG7tC5Xo
WlM+vToDqS2f8OS6b9ZzqQCcWqJB26SEoLuhq8pt5l0EO30bvM8/mpVzDD0N8vgY
0TMPb83KSMuK2V+GxKFHNECJqrmR/fz81qnVrQ1KC1K9JcYholVu4e9WnSKTBBkG
wOn+4BjPiK8f5ApccNtntl2Vn2ZGqMEtsblqxkGxIkjpoHkPsXl+LE+T7vlpjcbX
m3nLKQ93BbenhwJuoE78qTOyfNX0aDW7XOykWI7SWSeYSH/U4SmhQ0qLc6erL7YT
W/lSrpI+Pz5QJba7WxfnOYiT2kTyNmsjy5h2ug87zZ2Uq8wwRVh/Ynddx6asBJdS
vfAeen5RUV0eWZAsCmaThVpwGFidWkGBYxUmb54Podf4+/MJf0Y=
=iYz9
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v6.1, round 1
Highlights:
----------
- MPU:
- General:
- Add I2C support (5 instances) on STM32MP13.
- Add SPI support (5 instabces) on STM32MP13.
- Add timer interrupts support on STM32MP15.
- ST boards:
- Enable I2C1 and I2C5 on stm32mp135f-dk board.
- Add SPI5 on stm32mp135f-dk board but disabled as only available on
the GPIO expansion connector.
- ARGON:
- Remove spidev node as not used by the code.
* tag 'stm32-dt-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: argon: remove spidev node
ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi
ARM: dts: stm32: Fix typo in license text for Engicam boards
ARM: dts: stm32: Add timer interrupts on stm32mp15
ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk
ARM: dts: stm32: add spi nodes into stm32mp131.dtsi
ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts
ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi
Link: https://lore.kernel.org/r/d80afc20-2745-24a2-ab70-a5a03439bd50@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
different display outputs), Pine64 Pinephone Pro, Open AI Lab EAIDK-610.
New components of the rk356x (Video encoder/decoder, pcie, CSI dphy).
New board-peripherals for rock3a (pcie, i2c, regulators, rtc), quartz64-b
(pcie, analog audio) and BPI-R2-Pro (pcie), ROCK Pi (leds), Odroid Go (charger)
Usage of the new-ish bclk special handling for audio on rk3399.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmMb5bkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgXqMCACFPWLeVM94oEMr6RLP66BAgwZ6a9EF2CMi
P9Vu0A3Ruros7tjyHCDAMLCqdNUD7DnqEJanywN+vige1+0ybm9jg9XrOKTkij+j
CdeKh13guPHWn1eCfnZujfGMiSgdF0hVOCa6xfw3SWtSl0lzLjHf1OvEOqTTvpwS
6vTDbA1QIFXT5oB1UWYgwVT7H685Ry7GCbAUEJyXnjyBpUve2e5fzDUZJKrtBPCs
2Bt3K03zDdFeBeVUlU7X+CLJaDZ0yH3YCX4j6rJbbeysLvifO1Mw60D6SoiaLWNz
JN88eSfuCLidGus81G/jxAbxkfLIBBewVm3S4Txnq0y7ZdzA6PqL
=LcZi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cCcV
-----END PGP SIGNATURE-----
Merge tag 'v6.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards the Anberic RG353P and RG503, Radxa Rock4c+ (variant with
different display outputs), Pine64 Pinephone Pro, Open AI Lab EAIDK-610.
New components of the rk356x (Video encoder/decoder, pcie, CSI dphy).
New board-peripherals for rock3a (pcie, i2c, regulators, rtc), quartz64-b
(pcie, analog audio) and BPI-R2-Pro (pcie), ROCK Pi (leds), Odroid Go (charger)
Usage of the new-ish bclk special handling for audio on rk3399.
* tag 'v6.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: use BCLK to GPIO switch on rk3399
arm64: dts: rockchip: Add Hantro encoder node to rk356x
arm64: dts: rockchip: Add VPU support for RK3568/RK3566
arm64: dts: rockchip: Enable PCIe controller on rock3a
arm64: dts: rockchip: add rtc to rock3a
arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-b
arm64: dts: rockchip: add Anbernic RG353P and RG503
dt-bindings: arm: rockchip: Add Anbernic RG353P and RG503
dt-bindings: vendor-prefixes: add Anbernic
arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro
arm64: dts: rockchip: add LEDs for ROCK 4C+
arm64: dts: rockchip: add LED for ROCK Pi 4A/B/C/A+/B+
arm64: dts: rockchip: add rk817 chg to Odroid Go Advance
arm64: dts: rockchip: Fix SD card controller probe on Pinephone Pro
arm64: dts: rockchip: rk3399: Radxa ROCK 4C+
arm64: dts: rockchip: Add RK3399-T OPP table
dt-bindings: arm: rockchip: Document Radxa ROCK 4C+
arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro
dt-bindings: arm: rockchip: Add PinePhone Pro bindings
arm64: dts: rockchip: Add dts for a rk3399 based board EAIDK-610
...
Link: https://lore.kernel.org/r/5600929.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 956b200a84 ("spi: spidev: Warn loudly if instantiated from DT
as "spidev"") states that there should not be spidev nodes in DTs.
Remove this non-HW description. There won't be a regression because it
won't bind since 2015 anyhow.
Fixes: 16e3e44c5b ("ARM: dts: stm32: Add support for the emtrion emSBC-Argon")
Cc: Reinhold Mueller <reinhold.mueller@emtrion.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Create a separate pinmux for qspi chip select in stm32mp15-pinctrl.dtsi.
In the case we want to use transfer_one() API to communicate with a SPI
device, chip select signal must be driven individually.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The timer units in the stm32mp15x CPUs have interrupts, depending on the
timer flavour either one "global" or four dedicated ones. Add the irqs
to the timer units on stm32mp15x.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add pinctrl information and a disabled spi5 node within
stm32mp135f-dk.dts in order to use the spi5 bus which is
available via the GPIO expansion pins of the STM32MP135 Discovery board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the 5 instances of spi busses supported by the stm32mp131.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Enable the two i2c busses i2c1 and i2c5 available on the
stm32mp135f-dk Discovery board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the 5 instances of i2c busses supported by the stm32mp131.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.
In order to:
1. prevent BCLK from turning on by other component.
2. keep BCLK and LRCLK being present at the same time
This patch adjusts the device tree to allow BCLK to switch
to GPIO func before LRCLK output, and switch back during
LRCLK is output.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220708080726.4170711-1-judyhsiao@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3566 and RK3568 come with a dedicated Hantro instance solely for
encoding. This patch adds a node for this to the device tree, along with
a node for its MMU.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20220612155346.16288-4-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the nodes to enable the PCIe controller on the
Radxa ROCK3 Model A board. Run test with the MT7921
pcie wireless card.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20220726023516.6487-1-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The emac_rockchip.txt file is converted to YAML.
Phy nodes are now a subnode of mdio, so restyle
the emac nodes of rk3036/rk3066/rk3188.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Linux kernel has no logic to decide which driver to probe first.
To prevent race conditions remove the rk3036 emac node
fall back compatible string.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220603163539.537-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Anbernic RG353P and RG503 are both RK3566 based handheld gaming devices
from Anbernic.
Both devices have:
- 2 SDMMC slots.
- A Realtek rtl8821cs WiFi/Bluetooth adapter.
- A mini HDMI port.
- A USB C host port and a USB C otg port (currently only working as
device).
- Multiple GPIO buttons and a single ADC button.
- Dual analog joysticks controlled via a GPIO mux.
- A headphone jack with amplified stereo speakers via a SGM4865 amp.
- A PWM based vibrator for force feedback.
The RG353P has:
- 2GB LPDDR4 RAM.
- A 32GB eMMC.
- A 3.5 inch 640x480 4-lane DSI panel of unknown origin with an i2c
controlled touchscreen (touchscreen is a Hynitron CST340).
The RG503 has:
- 1GB LPDDR4 RAM.
- A 5 inch 960x544 AMOLED 2-lane DSI/DBI panel manufactured by Samsung
with part number ams495qa04. Data for this panel is provided via the
DSI interface, however commands are sent via a 9-bit 3-wire SPI
interface. The MISO pin of SPI3 of the SOC is wired to the input of
the panel, so it must be bitbanged.
This devicetree enables the following hardware:
- HDMI (plus audio).
- Analog audio, including speakers.
- All buttons.
- All SDMMC/eMMC/SDIO controllers.
- The ADC joysticks (note a pending patch is required to use them).
- WiFi/Bluetooth (note out of tree drivers are required).
- The PWM based vibrator motor.
The following hardware is not enabled:
- The display panels (drivers are being written and there are issues
with the upstream DSI and VOP2 subsystems).
- Battery (driver pending).
- Touchscreen on the RG353P (note the i2c2 bus is enabled for it).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220906210324.28986-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add entry for the Anbernic RG353P and RG503 handheld devices.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220906210324.28986-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add -regulator suffix to regulator names on Banana Pi R2 Pro board as
discussed on Mailinglist
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220906164212.84835-1-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
only user_led2 (blue) is supported.
user_led1 (green) is not connected to any gpio so it cannot be
controlled.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220908031726.1307105-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the new rk817 charger driver to the Odroid Go Advance. Create a
monitored battery node as well for the charger to use. All values
from monitored battery are gathered from the BSP kernel for the
Odroid Go Advance provided by HardKernel.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Link: https://lore.kernel.org/r/20220827021623.23829-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Voltage constraints on vccio_sd are invalid. They don't match the voltages
that LDO9 can generate, and this causes rk808-regulator driver to fail
to probe with -EINVAL when it tries to apply the constraints during boot.
Fix the constraints to something that LDO9 can be actually configured for.
Fixes: 78a21c7d59 ("arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Reviewed-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Tested-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Link: https://lore.kernel.org/r/20220904233652.3197885-1-megi@xff.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for Radxa ROCK 4C+ SBC.
Key differences of 4C+ compared to previous ROCK Pi 4.
- Rockchip RK3399-T SoC
- DP from 4C replaced with micro HDMI 2K@60fps
- 4-lane MIPI DSI with 1920*1080
- RK817 Audio codec
Also, an official naming convention from Radxa mention to remove
Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not
Radxa ROCK Pi 4C+.
Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz.
Add CPU operating points table for it.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Document the dt-bindings for Radxa ROCK 4C+ SBC.
Key differences of 4C+ compared to previous ROCK Pi 4.
- Rockchip RK3399-T SoC
- DP from 4C replaced with micro HDMI 2K@60fps
- 4-lane MIPI DSI with 1920*1080
- RK817 Audio codec
Also, an official naming convention from Radxa mention to remove
Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not
Radxa ROCK Pi 4C+.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220902065057.97425-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Beelink GT1 Ultimate is based on the Amlogic S912 (Q200)
reference design with the following specifications:
- 3GB DDR3 RAM
- 32GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- 10/100/1000 Ethernet
- AP6356S Wireless (802.11 a/b/g/n, BT 4.2)
- 3x USB 2.0 ports
- IR receiver
- 1x micro SD card slot
- 1x Power LED (white)
- 1x Reset button (internal)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220707093954.21716-2-christianshewitt@gmail.com
Add the board binding for the Shenzen AZW (Beelink) GT1 Ultimate
Android Set-Top Box device.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220707093954.21716-1-christianshewitt@gmail.com
This is a basic DT containing regulators and UART, intended to be a
base that myself and others can add additional nodes in future patches.
Tested to work: booting from eMMC/SD, output over UART.
https://wiki.pine64.org/wiki/PinePhone_Pro
This is derived from the community pine64-org repo[0] with fixes from
https://megous.com/git/linux.
0. 261d3b5f8a
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Co-developed-by: Kamil Trzciński <ayufan@ayufan.eu>
[no SoB, but Kamil is happy for this patch to be submitted]
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Co-developed-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk>
Reviewed-by: Caleb Connolly <kc@postmarketos.org>
Reviewed-by: Nícolas F. R. A. Prado <n@nfraprado.net>
Tested-by: Nícolas F. R. A. Prado <n@nfraprado.net>
Link: https://lore.kernel.org/r/20220829050040.17330-2-tom@tom-fitzhenry.me.uk
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
EAIDK-610 is from OPEN AI LAB and popularly used by university
students.
Specification:
- Rockchip RK3399
- LPDDR3 4GB
- TF sd scard slot
- eMMC
- AP6255 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- 12V DC Power supply
This patch is test on Armbain and Glodroid with
HDMI/GPU/USB HOST/Type-C ADB/WIFI/BT.
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20220709103016.2754044-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
EAIDK-610 is a rk3399 based board from OPEN AI LAB
and popularly used by university students.
Specification:
- Rockchip RK3399
- LPDDR3 4GB
- TF sd scard slot
- eMMC
- AP6255 for WiFi + BT
- Gigabit ethernet
- HDMI out
- 40 pin header
- USB 2.0 x 2
- USB 3.0 x 1
- USB 3.0 Type-C x 1
- 12V DC Power supply
Signed-off-by: Andy Yan <andyshrk@163.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220709103001.2753992-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add Nodes to Bananapi-R2-Pro board to support PCIe v3 and
set PCIe related regulators to always on.
Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220825193836.54262-6-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add nodes to rk356x devicetree to support PCIe v3.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220825193836.54262-5-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Document support for the R-Car H3Ne-1.7G SoC on the Salvator-XS and
ULCB development boards,
- Document system controller support for the RZ/Five SoC,
- Document support for the R-Car V3H2 SoC and the Condor-I development
board.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYxHJkQAKCRCKwlD9ZEnx
cOYOAQDpsBwqnTBnDizDB4pDTUGwXFIexIQ4A/yRR7oP6BtBDwEA4x4/ZS2q6W6q
LJp2qmQIpUzpQrL5qu5VDJgkO0nL2Aw=
=altv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lZ25
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas DT binding updates for v6.1
- Document support for the R-Car H3Ne-1.7G SoC on the Salvator-XS and
ULCB development boards,
- Document system controller support for the RZ/Five SoC,
- Document support for the R-Car V3H2 SoC and the Condor-I development
board.
* tag 'renesas-dt-bindings-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document Renesas R-Car V3H2 SoC and board
dt-bindings: soc: renesas: renesas,rzg2l-sysc: Document RZ/Five SoC
dt-bindings: arm: renesas: Document R-Car H3Ne-1.7G SoC and boards
Link: https://lore.kernel.org/r/cover.1662111137.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- SDHI and eMMC support for the R-Car S4-8 SoC and the Spider
development board,
- Timer (CMT and TMU) and SPI (MSIOF) support for the R-Car S4-8 SoC,
- External and GPIO interrupt support for the RZ/G2L and RZ/V2L SoCs,
- Initial support for the R-Car H3Ne-1.7G (R8A779MB) SoC,
- SPI DMA support for the RZ/G2UL, RZ/G2L, and RZ/V2L SoCs,
- Pin control and I2C support for the RZ/V2M SoC and the RZ/V2M
Evaluation Kit,
- initial support for the R-Car V3H2 (R8A77980A) SoC and the Condor-I
development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYxHH5AAKCRCKwlD9ZEnx
cPL2AP9nyergZjUfqFUBVP8C9jsL7GXepGt6D6SdPf9YGZNCMgEA+z9HUguK2RdM
urlB4NnQgaYyM5g8w9JoNtOzAC4AKA0=
=WZou
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=vOUA
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v6.1
- SDHI and eMMC support for the R-Car S4-8 SoC and the Spider
development board,
- Timer (CMT and TMU) and SPI (MSIOF) support for the R-Car S4-8 SoC,
- External and GPIO interrupt support for the RZ/G2L and RZ/V2L SoCs,
- Initial support for the R-Car H3Ne-1.7G (R8A779MB) SoC,
- SPI DMA support for the RZ/G2UL, RZ/G2L, and RZ/V2L SoCs,
- Pin control and I2C support for the RZ/V2M SoC and the RZ/V2M
Evaluation Kit,
- initial support for the R-Car V3H2 (R8A77980A) SoC and the Condor-I
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (33 commits)
arm64: dts: renesas: Add V3H2 Condor-I board support
arm64: dts: renesas: Add r8a77980a.dtsi
arm64: dts: renesas: Add condor-common.dtsi
arm64: dts: renesas: Drop clock-names property from RPC node
arm64: dts: renesas: r8a779f0: Add MSIOF nodes
arm64: dts: renesas: r8a774a1: Put I2C aliases to board files
arm64: dts: renesas: r8a774e1: Rename i2c_dvfs to iic_pmic
arm64: dts: renesas: r8a779a0: Put I2C aliases to board files
arm64: dts: renesas: r8a77990: Put I2C aliases to board files
arm64: dts: renesas: r8a77980: Put I2C aliases to board files
arm64: dts: renesas: r8a77970: Put I2C aliases to board files
arm64: dts: renesas: r8a779{51|60|65}: Put I2C aliases to board files
arm64: dts: renesas: rzv2m evk: Enable i2c
arm64: dts: renesas: r9a09g011: Add i2c nodes
arm64: dts: renesas: r9a09g011: Add pinctrl node
arm64: dts: renesas: r9a07g043: Fix SCI{Rx,Tx} interrupt types
arm64: dts: renesas: r9a07g054: Fix SCI{Rx,Tx} interrupt types
arm64: dts: renesas: r9a07g044: Fix SCI{Rx,Tx} interrupt types
arm64: dts: renesas: r9a07g043: Fix audio clk node names
arm64: dts: renesas: r9a07g054: Add DMA support to RSPI
...
Link: https://lore.kernel.org/r/cover.1662111128.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains:
- one new LAN966X based board, namely lan966x-pcb8290
- gpio leds support for lan966x-pcb8291 and lan966x-pcb8309
- a cleanup for sam9x60ek to avoid DT compilation warning due to regulators
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYxG9uwAKCRCejrg/N2X7
/YLgAP9MoJHWe34fc0ck5BI+x1Pkcqf1RM/Fya1ks67o1CEa+gEAhQw6Sn/bugMf
+XASUkDvXEAr9v7kaHk1Mgpe1kpfhw0=
=Vkvr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lGiW
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v6.1
It contains:
- one new LAN966X based board, namely lan966x-pcb8290
- gpio leds support for lan966x-pcb8291 and lan966x-pcb8309
- a cleanup for sam9x60ek to avoid DT compilation warning due to regulators
* tag 'at91-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: add led configuration
ARM: dts: at91: sam9x60ek: remove simple-bus for regulators
ARM: dts: lan966x: add support for pcb8290
Link: https://lore.kernel.org/r/20220902085845.4193579-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We have V3H Condor board, and will have V3H2 Condor-I board.
This patch adds condor-common.dtsi to share the common settings
between these boards.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qsy625m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
With 'unevaluatedProperties' support implemented, there are a number of
warnings when running dtbs_check:
arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb: spi@ee200000: Unevaluated properties are not allowed ('clock-names' was unexpected)
From schema: Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
The main problem is that the DT bindings do not allow clock-names.
So just drop the clock-names properties from the SoC DTSI files.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220829215128.5983-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
