On zoned block devices, DATA block groups can accumulate large amounts
of zone_unusable space (space between the write pointer and zone end).
When zone_unusable reaches high levels (e.g., 98% of total space), new
allocations fail with ENOSPC even though space could be reclaimed by
relocating data and resetting zones.
The existing flush states don't handle this scenario effectively - they
either try to free cached space (which doesn't exist for zone_unusable)
or reset empty zones (which doesn't help when zones contain valid data
mixed with zone_unusable space).
Add a new RECLAIM_ZONES flush state that triggers the block group
reclaim machinery. This state:
- Calls btrfs_reclaim_sweep() to identify reclaimable block groups
- Calls btrfs_reclaim_bgs() to queue reclaim work
- Waits for reclaim_bgs_work to complete via flush_work()
- Commits the transaction to finalize changes
The reclaim work (btrfs_reclaim_bgs_work) safely relocates valid data
from fragmented block groups to other locations before resetting zones,
converting zone_unusable space back into usable space.
Insert RECLAIM_ZONES before RESET_ZONES in data_flush_states so that
we attempt to reclaim partially-used block groups before falling back
to resetting completely empty ones.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On zoned block devices, block groups accumulate zone_unusable space
(space between the write pointer and zone end that cannot be allocated
until the zone is reset). When a block group becomes mostly
zone_unusable but still contains some valid data and it gets added to the
unused_bgs list it can never be deleted because it's not actually empty.
The deletion code (btrfs_delete_unused_bgs) skips these block groups
due to the btrfs_is_block_group_used() check, leaving them on the
unused_bgs list indefinitely. This causes two problems:
1. The block groups are never reclaimed, permanently wasting space
2. Eventually leads to ENOSPC even though reclaimable space exists
Fix by detecting block groups where zone_unusable exceeds 50% of the
block group size. Move these to the reclaim_bgs list instead of
skipping them. This triggers btrfs_reclaim_bgs_work() which:
1. Marks the block group read-only
2. Relocates the remaining valid data via btrfs_relocate_chunk()
3. Removes the emptied block group
4. Resets the zones, converting zone_unusable back to usable space
The 50% threshold ensures we only reclaim block groups where most space
is unusable, making relocation worthwhile. Block groups with less
zone_unusable are left on unused_bgs to potentially become fully empty
through normal deletion.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On zoned filesystems metadata space accounting can become overly optimistic
due to delayed refs reservations growing without a hard upper bound.
The delayed_refs_rsv block reservation is allowed to speculatively grow and
is only backed by actual metadata space when refilled. On zoned devices this
can result in delayed_refs_rsv reserving a large portion of metadata space
that is already effectively unusable due to zone write pointer constraints.
As a result, space_info->may_use can grow far beyond the usable metadata
capacity, causing the allocator to believe space is available when it is not.
This leads to premature ENOSPC failures and "cannot satisfy tickets" reports
even though commits would be able to make progress by flushing delayed refs.
Analysis of "-o enospc_debug" dumps using a Python debug script
confirmed that delayed_refs_rsv was responsible for the majority of
metadata overcommit on zoned devices. By correlating space_info counters
(total, used, may_use, zone_unusable) across transactions, the analysis
showed that may_use continued to grow even after usable metadata space
was exhausted, with delayed refs refills accounting for the excess
reservations.
Here's the output of the analysis:
======================================================================
Space Type: METADATA
======================================================================
Raw Values:
Total: 256.00 MB (268435456 bytes)
Used: 128.00 KB (131072 bytes)
Pinned: 16.00 KB (16384 bytes)
Reserved: 144.00 KB (147456 bytes)
May Use: 255.48 MB (267894784 bytes)
Zone Unusable: 192.00 KB (196608 bytes)
Calculated Metrics:
Actually Usable: 255.81 MB (total - zone_unusable)
Committed: 255.77 MB (used + pinned + reserved + may_use)
Consumed: 320.00 KB (used + zone_unusable)
Percentages:
Zone Unusable: 0.07% of total
May Use: 99.80% of total
Fix this by adding a zoned-specific cap in btrfs_delayed_refs_rsv_refill():
Before reserving additional metadata bytes, limit the delayed refs
reservation based on the usable metadata space (total bytes minus
zone_unusable). If the reservation would exceed this cap, return -EAGAIN
to trigger the existing flush/commit logic instead of overcommitting
metadata space.
This preserves the existing reservation and flushing semantics while
preventing metadata overcommit on zoned devices. The change is limited to
metadata space and does not affect non-zoned filesystems.
This patch addresses premature metadata ENOSPC conditions on zoned devices
and ensures delayed refs are throttled before exhausting usable metadata.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are calling extent_buffer_uptodate() twice, and the result will not
change before the second call. So remove the second call.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Since commit 59615e2c1f ("btrfs: reject single block sized compression
early"), the following script will result the inode to have NOCOMPRESS
flag, meanwhile old kernels don't:
# mkfs.btrfs -f $dev
# mount $dev $mnt -o max_inline=2k,compress=zstd
# truncate -s 8k $mnt/foobar
# xfs_io -f -c "pwrite 0 2k" $mnt/foobar
# sync
Before that commit, the inode will not have NOCOMPRESS flag:
item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160
generation 9 transid 9 size 8192 nbytes 4096
block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0
sequence 3 flags 0x0(none)
But after that commit, the inode will have NOCOMPRESS flag:
item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160
generation 9 transid 10 size 8192 nbytes 4096
block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0
sequence 3 flags 0x8(NOCOMPRESS)
This will make a lot of files no longer to be compressed.
[CAUSE]
The old compressed inline check looks like this:
if (total_compressed <= blocksize &&
(start > 0 || end + 1 < inode->disk_i_size))
goto cleanup_and_bail_uncompressed;
That inline part check is equal to "!(start == 0 && end + 1 >=
inode->disk_i_size)", but the new check no longer has that disk_i_size
check.
Thus it means any single block sized write at file offset 0 will pass
the inline check, which is wrong.
Furthermore, since we have merged the old check into
inode_need_compress(), there is no disk_i_size based inline check
anymore, we will always try compressing that single block at file offset
0, then later find out it's not a net win and go to the
mark_incompressible tag.
This results the inode to have NOCOMPRESS flag.
[FIX]
Add back the missing disk_i_size based check into inode_need_compress().
Now the same script will no longer cause NOCOMPRESS flag.
Fixes: 59615e2c1f ("btrfs: reject single block sized compression early")
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-btrfs/20260208183840.975975-1-clm@meta.com/
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In case we have multiple devices, there is no point in setting the written
flag in the super block on every iteration over the device list. Just do
it once before the loop.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's no need to pass max_mirrors to write_all_supers() since from the
given transaction handle we can infer if we are in a transaction commit
or fsync context, so we can determine how many mirrors we need to use.
So remove the max_mirror argument from write_all_supers() and stop
adjusting it in the callees write_dev_supers() and wait_dev_supers(),
simplifying them besides the parameter list for write_all_supers().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Mark all the unexpected error checks as unlikely, to make it more clear
they are unexpected and to allow the compiler to potentially generate
better code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are in a transaction context and have an handle, so instead of using
the less preferred btrfs_handle_fs_error(), abort the transaction and
log an error to give some context information.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are holding a transaction In every context we call write_all_supers(),
so pass the transaction handle instead of fs_info to it. This will allow
us to abort the transaction in write_all_supers() instead of calling
btrfs_handle_fs_error() in a later patch.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When validating a super block, either when mounting or every time we write
a super block to disk, we do many checks for error and warnings and we
don't expect to hit any. So mark each one as unlikely to reflect that and
allow the compiler to potentially generate better code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The comment is incomplete as BTRFS_RESERVE_NO_FLUSH is used for more
reasons than currently holding a transaction handle open. Update the
comment with all the other reasons and give some details.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For a fsync we never reserve space in advance, we just start a transaction
without reserving space and we use an empty block reserve for a log tree.
We reserve space as we need while updating a log tree, we end up in
btrfs_use_block_rsv() when reserving space for the allocation of a log
tree extent buffer and we attempt first to reserve without flushing,
and if that fails we attempt to consume from the global reserve or
overcommit metadata. This makes us consume space that may be the last
resort for a transaction commit to succeed, therefore increasing the
chances for a transaction abort with -ENOSPC.
So make btrfs_use_block_rsv() fail if we can't reserve metadata space for
a log tree extent buffer allocation without flushing, making the fsync
fallback to a transaction commit and avoid using critical space that could
be the only resort for a transaction commit to succeed when we are in a
critical space situation.
Reviewed-by: Leo Martins <loemra.dev@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Over the years we often get reports of some -ENOSPC failure while updating
metadata that leads to a transaction abort. I have seen this happen for
filesystems of all sizes and with workloads that are very user/customer
specific and unable to reproduce, but Aleksandar recently reported a
simple way to reproduce this with a 1G filesystem and using the bonnie++
benchmark tool. The following test script reproduces the failure:
$ cat test.sh
#!/bin/bash
# Create and use a 1G null block device, memory backed, otherwise
# the test takes a very long time.
modprobe null_blk nr_devices="0"
null_dev="/sys/kernel/config/nullb/nullb0"
mkdir "$null_dev"
size=$((1 * 1024)) # in MB
echo 2 > "$null_dev/submit_queues"
echo "$size" > "$null_dev/size"
echo 1 > "$null_dev/memory_backed"
echo 1 > "$null_dev/discard"
echo 1 > "$null_dev/power"
DEV=/dev/nullb0
MNT=/mnt/nullb0
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/test/
bonnie++ -d $MNT/test/ -m BTRFS -u 0 -s 256M -r 128M -b
umount $MNT
echo 0 > "$null_dev/power"
rmdir "$null_dev"
When running this bonnie++ fails in the phase where it deletes test
directories and files:
$ ./test.sh
(...)
Using uid:0, gid:0.
Writing a byte at a time...done
Writing intelligently...done
Rewriting...done
Reading a byte at a time...done
Reading intelligently...done
start 'em...done...done...done...done...done...
Create files in sequential order...done.
Stat files in sequential order...done.
Delete files in sequential order...done.
Create files in random order...done.
Stat files in random order...done.
Delete files in random order...Can't sync directory, turning off dir-sync.
Can't delete file 9Bq7sr0000000338
Cleaning up test directory after error.
Bonnie: drastic I/O error (rmdir): Read-only file system
And in the syslog/dmesg we can see the following transaction abort trace:
[161915.501506] BTRFS warning (device nullb0): Skipping commit of aborted transaction.
[161915.502983] ------------[ cut here ]------------
[161915.503832] BTRFS: Transaction aborted (error -28)
[161915.504748] WARNING: fs/btrfs/transaction.c:2045 at btrfs_commit_transaction+0xa21/0xd30 [btrfs], CPU#11: bonnie++/3377975
[161915.506786] Modules linked in: btrfs dm_zero dm_snapshot (...)
[161915.518759] CPU: 11 UID: 0 PID: 3377975 Comm: bonnie++ Tainted: G W 6.19.0-rc7-btrfs-next-224+ #4 PREEMPT(full)
[161915.520857] Tainted: [W]=WARN
[161915.521405] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[161915.523414] RIP: 0010:btrfs_commit_transaction+0xa24/0xd30 [btrfs]
[161915.524630] Code: 48 8b 7c 24 (...)
[161915.526982] RSP: 0018:ffffd3fe8206fda8 EFLAGS: 00010292
[161915.527707] RAX: 0000000000000002 RBX: ffff8f4886d3c000 RCX: 0000000000000000
[161915.528723] RDX: 0000000002040001 RSI: 00000000ffffffe4 RDI: ffffffffc088f780
[161915.529691] RBP: ffff8f4f5adae7e0 R08: 0000000000000000 R09: ffffd3fe8206fb90
[161915.530842] R10: ffff8f4f9c1fffa8 R11: 0000000000000003 R12: 00000000ffffffe4
[161915.532027] R13: ffff8f4ef2cf2400 R14: ffff8f4f5adae708 R15: ffff8f4f62d18000
[161915.533229] FS: 00007ff93112a780(0000) GS:ffff8f4ff63ee000(0000) knlGS:0000000000000000
[161915.534611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[161915.535575] CR2: 00005571b3072000 CR3: 0000000176080005 CR4: 0000000000370ef0
[161915.536758] Call Trace:
[161915.537185] <TASK>
[161915.537575] btrfs_sync_file+0x431/0x530 [btrfs]
[161915.538473] do_fsync+0x39/0x80
[161915.539042] __x64_sys_fsync+0xf/0x20
[161915.539750] do_syscall_64+0x50/0xf20
[161915.540396] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[161915.541301] RIP: 0033:0x7ff930ca49ee
[161915.541904] Code: 08 0f 85 f5 (...)
[161915.544830] RSP: 002b:00007ffd94291f38 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
[161915.546152] RAX: ffffffffffffffda RBX: 00007ff93112a780 RCX: 00007ff930ca49ee
[161915.547263] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[161915.548383] RBP: 0000000000000dab R08: 0000000000000000 R09: 0000000000000000
[161915.549853] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd94291fb0
[161915.551196] R13: 00007ffd94292350 R14: 0000000000000001 R15: 00007ffd94292340
[161915.552161] </TASK>
[161915.552457] ---[ end trace 0000000000000000 ]---
[161915.553232] BTRFS info (device nullb0 state A): dumping space info:
[161915.553236] BTRFS info (device nullb0 state A): space_info DATA (sub-group id 0) has 12582912 free, is not full
[161915.553239] BTRFS info (device nullb0 state A): space_info total=12582912, used=0, pinned=0, reserved=0, may_use=0, readonly=0 zone_unusable=0
[161915.553243] BTRFS info (device nullb0 state A): space_info METADATA (sub-group id 0) has -5767168 free, is full
[161915.553245] BTRFS info (device nullb0 state A): space_info total=53673984, used=6635520, pinned=46956544, reserved=16384, may_use=5767168, readonly=65536 zone_unusable=0
[161915.553251] BTRFS info (device nullb0 state A): space_info SYSTEM (sub-group id 0) has 8355840 free, is not full
[161915.553254] BTRFS info (device nullb0 state A): space_info total=8388608, used=16384, pinned=16384, reserved=0, may_use=0, readonly=0 zone_unusable=0
[161915.553257] BTRFS info (device nullb0 state A): global_block_rsv: size 5767168 reserved 5767168
[161915.553261] BTRFS info (device nullb0 state A): trans_block_rsv: size 0 reserved 0
[161915.553263] BTRFS info (device nullb0 state A): chunk_block_rsv: size 0 reserved 0
[161915.553265] BTRFS info (device nullb0 state A): remap_block_rsv: size 0 reserved 0
[161915.553268] BTRFS info (device nullb0 state A): delayed_block_rsv: size 0 reserved 0
[161915.553270] BTRFS info (device nullb0 state A): delayed_refs_rsv: size 0 reserved 0
[161915.553272] BTRFS: error (device nullb0 state A) in cleanup_transaction:2045: errno=-28 No space left
[161915.554463] BTRFS info (device nullb0 state EA): forced readonly
The problem is that we allow for a very aggressive metadata overcommit,
about 1/8th of the currently available space, even when the task
attempting the reservation allows for full flushing. Over time this allows
more and more tasks to overcommit without getting a transaction commit to
release pinned extents, joining the same transaction and eventually lead
to the transaction abort when attempting some tree update, as the extent
allocator is not able to find any available metadata extent and it's not
able to allocate a new metadata block group either (not enough unallocated
space for that).
Fix this by allowing the overcommit to be up to 1/64th of the available
(unallocated) space instead and for that limit to apply to both types of
full flushing, BTRFS_RESERVE_FLUSH_ALL and BTRFS_RESERVE_FLUSH_ALL_STEAL.
This way we get more frequent transaction commits to release pinned
extents in case our caller is in a context where full flushing is allowed.
Note that the space infos dump in the dmesg/syslog right after the
transaction abort give the wrong idea that we have plenty of unallocated
space when the abort happened. During the bonnie++ workload we had a
metadata chunk allocation attempt and it failed with -ENOSPC because at
that time we had a bunch of data block groups allocated, which then became
empty and got deleted by the cleaner kthread after the metadata chunk
allocation failed with -ENOSPC and before the transaction abort happened
and dumped the space infos.
The custom tracing (some trace_printk() calls spread in strategic places)
used to check that:
mount-1793735 [011] ...1. 28877.261096: btrfs_add_bg_to_space_info: added bg offset 13631488 length 8388608 flags 1 to space_info->flags 1 total_bytes 8388608 bytes_used 0 bytes_may_use 0
mount-1793735 [011] ...1. 28877.261098: btrfs_add_bg_to_space_info: added bg offset 22020096 length 8388608 flags 34 to space_info->flags 2 total_bytes 8388608 bytes_used 16384 bytes_may_use 0
mount-1793735 [011] ...1. 28877.261100: btrfs_add_bg_to_space_info: added bg offset 30408704 length 53673984 flags 36 to space_info->flags 4 total_bytes 53673984 bytes_used 131072 bytes_may_use 0
These are from loading the block groups created by mkfs during mount.
Then when bonnie++ starts doing its thing:
kworker/u48:5-1792004 [011] ..... 28886.122050: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 65536 dev_extent_want 1073741824
kworker/u48:5-1792004 [011] ..... 28886.122053: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 65536 dev_extent_want 1073741824 max_avail 927596544
kworker/u48:5-1792004 [011] ..... 28886.122055: btrfs_make_block_group: make bg offset 84082688 size 117440512 type 1
kworker/u48:5-1792004 [011] ...1. 28886.122064: btrfs_add_bg_to_space_info: added bg offset 84082688 length 117440512 flags 1 to space_info->flags 1 total_bytes 125829120 bytes_used 0 bytes_may_use 5251072
First allocation of a data block group of 112M.
kworker/u48:5-1792004 [011] ..... 28886.192408: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 65536 dev_extent_want 1073741824
kworker/u48:5-1792004 [011] ..... 28886.192413: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 65536 dev_extent_want 1073741824 max_avail 810156032
kworker/u48:5-1792004 [011] ..... 28886.192415: btrfs_make_block_group: make bg offset 201523200 size 117440512 type 1
kworker/u48:5-1792004 [011] ...1. 28886.192425: btrfs_add_bg_to_space_info: added bg offset 201523200 length 117440512 flags 1 to space_info->flags 1 total_bytes 243269632 bytes_used 0 bytes_may_use 122691584
Another 112M data block group allocated.
kworker/u48:5-1792004 [011] ..... 28886.260935: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 65536 dev_extent_want 1073741824
kworker/u48:5-1792004 [011] ..... 28886.260941: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 65536 dev_extent_want 1073741824 max_avail 692715520
kworker/u48:5-1792004 [011] ..... 28886.260943: btrfs_make_block_group: make bg offset 318963712 size 117440512 type 1
kworker/u48:5-1792004 [011] ...1. 28886.260954: btrfs_add_bg_to_space_info: added bg offset 318963712 length 117440512 flags 1 to space_info->flags 1 total_bytes 360710144 bytes_used 0 bytes_may_use 240132096
Yet another one.
bonnie++-1793755 [010] ..... 28886.280407: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 65536 dev_extent_want 1073741824
bonnie++-1793755 [010] ..... 28886.280412: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 65536 dev_extent_want 1073741824 max_avail 575275008
bonnie++-1793755 [010] ..... 28886.280414: btrfs_make_block_group: make bg offset 436404224 size 117440512 type 1
bonnie++-1793755 [010] ...1. 28886.280419: btrfs_add_bg_to_space_info: added bg offset 436404224 length 117440512 flags 1 to space_info->flags 1 total_bytes 478150656 bytes_used 0 bytes_may_use 268435456
One more.
kworker/u48:5-1792004 [011] ..... 28886.566233: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 65536 dev_extent_want 1073741824
kworker/u48:5-1792004 [011] ..... 28886.566238: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 65536 dev_extent_want 1073741824 max_avail 457834496
kworker/u48:5-1792004 [011] ..... 28886.566241: btrfs_make_block_group: make bg offset 553844736 size 117440512 type 1
kworker/u48:5-1792004 [011] ...1. 28886.566250: btrfs_add_bg_to_space_info: added bg offset 553844736 length 117440512 flags 1 to space_info->flags 1 total_bytes 595591168 bytes_used 268435456 bytes_may_use 209723392
Another one.
bonnie++-1793755 [009] ..... 28886.613446: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 65536 dev_extent_want 1073741824
bonnie++-1793755 [009] ..... 28886.613451: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 65536 dev_extent_want 1073741824 max_avail 340393984
bonnie++-1793755 [009] ..... 28886.613453: btrfs_make_block_group: make bg offset 671285248 size 117440512 type 1
bonnie++-1793755 [009] ...1. 28886.613458: btrfs_add_bg_to_space_info: added bg offset 671285248 length 117440512 flags 1 to space_info->flags 1 total_bytes 713031680 bytes_used 268435456 bytes_may_use 2 68435456
Another one.
bonnie++-1793755 [009] ..... 28886.674953: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 65536 dev_extent_want 1073741824
bonnie++-1793755 [009] ..... 28886.674957: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 65536 dev_extent_want 1073741824 max_avail 222953472
bonnie++-1793755 [009] ..... 28886.674959: btrfs_make_block_group: make bg offset 788725760 size 117440512 type 1
bonnie++-1793755 [009] ...1. 28886.674963: btrfs_add_bg_to_space_info: added bg offset 788725760 length 117440512 flags 1 to space_info->flags 1 total_bytes 830472192 bytes_used 268435456 bytes_may_use 1 34217728
Another one.
bonnie++-1793755 [009] ..... 28886.674981: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 65536 dev_extent_want 1073741824
bonnie++-1793755 [009] ..... 28886.674982: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 65536 dev_extent_want 1073741824 max_avail 105512960
bonnie++-1793755 [009] ..... 28886.674983: btrfs_make_block_group: make bg offset 906166272 size 105512960 type 1
bonnie++-1793755 [009] ...1. 28886.674984: btrfs_add_bg_to_space_info: added bg offset 906166272 length 105512960 flags 1 to space_info->flags 1 total_bytes 935985152 bytes_used 268435456 bytes_may_use 67108864
Another one, but a bit smaller (~100.6M) since we now have less space.
bonnie++-1793758 [009] ..... 28891.962096: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 65536 dev_extent_want 1073741824
bonnie++-1793758 [009] ..... 28891.962103: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 65536 dev_extent_want 1073741824 max_avail 12582912
bonnie++-1793758 [009] ..... 28891.962105: btrfs_make_block_group: make bg offset 1011679232 size 12582912 type 1
bonnie++-1793758 [009] ...1. 28891.962114: btrfs_add_bg_to_space_info: added bg offset 1011679232 length 12582912 flags 1 to space_info->flags 1 total_bytes 948568064 bytes_used 268435456 bytes_may_use 8192
Another one, this one even smaller (12M).
kworker/u48:5-1792004 [011] ..... 28892.112802: btrfs_chunk_alloc: enter first metadata chunk alloc attempt
kworker/u48:5-1792004 [011] ..... 28892.112805: btrfs_create_chunk: gather_device_info 1 ctl->dev_extent_min = 131072 dev_extent_want 536870912
kworker/u48:5-1792004 [011] ..... 28892.112806: btrfs_create_chunk: gather_device_info 2 ctl->dev_extent_min = 131072 dev_extent_want 536870912 max_avail 0
536870912 is 512M, the standard 256M metadata chunk size times 2 because
of the DUP profile for metadata.
'max_avail' is what find_free_dev_extent() returns to us in
gather_device_info().
As a result, gather_device_info() sets ctl->ndevs to 0, making
decide_stripe_size() fail with -ENOSPC, and therefore metadata chunk
allocation fails while we are attempting to run delayed items during
the transaction commit.
kworker/u48:5-1792004 [011] ..... 28892.112807: btrfs_create_chunk: decide_stripe_size fail -ENOSPC
In the syslog/dmesg pasted above, which happened after the transaction was
aborted, the space info dumps did not account for all these data block
groups that were allocated during bonnie++'s workload. And that is because
after the metadata chunk allocation failed with -ENOSPC and before the
transaction abort happened, most of the data block groups had become empty
and got deleted by by the cleaner kthread - when the abort happened, we
had bonnie++ in the middle of deleting the files it created.
But dumping the space infos right after the metadata chunk allocation fails
by adding a call to btrfs_dump_space_info_for_trans_abort() in
decide_stripe_size() when it returns -ENOSPC, we get:
[29972.409295] BTRFS info (device nullb0): dumping space info:
[29972.409300] BTRFS info (device nullb0): space_info DATA (sub-group id 0) has 673341440 free, is not full
[29972.409303] BTRFS info (device nullb0): space_info total=948568064, used=0, pinned=275226624, reserved=0, may_use=0, readonly=0 zone_unusable=0
[29972.409305] BTRFS info (device nullb0): space_info METADATA (sub-group id 0) has 3915776 free, is not full
[29972.409306] BTRFS info (device nullb0): space_info total=53673984, used=163840, pinned=42827776, reserved=147456, may_use=6553600, readonly=65536 zone_unusable=0
[29972.409308] BTRFS info (device nullb0): space_info SYSTEM (sub-group id 0) has 7979008 free, is not full
[29972.409310] BTRFS info (device nullb0): space_info total=8388608, used=16384, pinned=0, reserved=0, may_use=393216, readonly=0 zone_unusable=0
[29972.409311] BTRFS info (device nullb0): global_block_rsv: size 5767168 reserved 5767168
[29972.409313] BTRFS info (device nullb0): trans_block_rsv: size 0 reserved 0
[29972.409314] BTRFS info (device nullb0): chunk_block_rsv: size 393216 reserved 393216
[29972.409315] BTRFS info (device nullb0): remap_block_rsv: size 0 reserved 0
[29972.409316] BTRFS info (device nullb0): delayed_block_rsv: size 0 reserved 0
So here we see there's ~904.6M of data space, ~51.2M of metadata space and
8M of system space, making a total of 963.8M.
Reported-by: Aleksandar Gerasimovski <Aleksandar.Gerasimovski@belden.com>
Link: https://lore.kernel.org/linux-btrfs/SA1PR18MB56922F690C5EC2D85371408B998FA@SA1PR18MB5692.namprd18.prod.outlook.com/
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H61vZ3_+eqJ1A9po2WcgNJJjUu9MJQoYB2oDSAAecHaug@mail.gmail.com/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For the following disk layout, can_overcommit() can cause false
confidence in available space:
devid 1 unallocated: 1GiB
devid 2 unallocated: 50GiB
metadata type: RAID1
As can_overcommit() simply uses unallocated space with factor to
calculate the allocatable metadata chunk size, resulting 25.5GiB
available space.
But in reality we can only allocate one 1GiB RAID1 chunk, the remaining
49GiB on devid 2 will never be utilized to fulfill a RAID1 chunk.
This leads to various ENOSPC related transaction abort and flips the fs
read-only.
Now use per-profile available space in calc_available_free_space(), and
only when that failed we fall back to the old factor based estimation.
And for zoned devices or for the very low chance of temporary memory
allocation failure, we will still fallback to factor based estimation.
But I hope in reality it's very rare.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This involves the following timing:
- Chunk allocation
- Chunk removal
- After Mount
- New device
- Device removal
- Device shrink
- Device enlarge
And since the function btrfs_update_per_profile_avail() will not return
an error, this won't cause new error handling path.
Although when btrfs_update_per_profile_avail() failed (only ENOSPC
possible) it will mark the per-profile available estimation as
unreliable, so later btrfs_get_per_profile_avail() will return false and
require the caller to have a fallback solution.
The function btrfs_update_per_profile_avail() will be executed with
chunk_mutex hold, thus it will slightly slow down those involved
functions, but not a lot.
As all the core workload is just various u64 calculations inside a loop,
without any tree search, the overhead should be acceptable even for all
supported 9 profiles.
For 4 disks (which exercises all 9 profiles), the execution time of that
function will still be less than 10 us.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a long known bug that if metadata is using RAID1 on two disks
with unbalanced sizes, there is a very high chance to hit ENOSPC related
transaction abort.
[CAUSE]
The root cause is in the available space estimation code:
- Factor based calculation
Just use all unallocated space, divide by the profile factor
One obvious user is can_overcommit().
This can not handle the following example:
devid 1 unallocated: 1GiB
devid 2 unallocated: 50GiB
metadata type: RAID1
If using factor based estimation, we can use (1GiB + 50GiB) / 2 = 25.5GiB
free space for metadata.
Thus we can continue allocating metadata (over-commit) way beyond the
1GiB limit.
But this estimation is completely wrong, in reality we can only allocate
one single 1GiB RAID1 block group, thus if we continue over-commit, at
one time we will hit ENOSPC at some critical path and flips the fs
read-only.
[SOLUTION]
This patch will introduce per-profile available space estimation,
which can provide chunk-allocator like behavior to give a (mostly)
accurate result, with under-estimate corner cases.
There are some differences between the estimation and real chunk
allocator:
- No consideration on hole size
It's fine for most cases, as all data/metadata strips are in 1GiB size
thus there should not be any hole wasting much space.
And chunk allocator is able to use smaller stripes when there is
really no other choice.
Although in theory this means it can lead to some over-estimation, it
should not cause too much hassle in the real world.
The other benefit of such behavior is, we avoid dev-extent tree search
completely, thus the overhead is very small.
- No true balance for certain cases
If we have 3 disks RAID1, and each device has 2GiB unallocated space,
we can load balance the chunk allocation so that we can allocate 3GiB
RAID1 chunks, and that's what chunk allocator will do.
But this current estimation code is using the largest available space
to do a single allocation. Meaning the estimation will be 2GiB, thus
under estimate.
Such under estimation is fine and after the first chunk allocation, the
estimation will be updated and still give a correct 2GiB
estimation.
So this only means the estimation will be a little conservative, which
is safer for call sites like metadata over-commit check.
With that facility, for above 1GiB + 50GiB case, it will give a RAID1
estimation of 1GiB, instead of the incorrect 25.5GiB.
Or for a more complex example:
devid 1 unallocated: 1T
devid 2 unallocated: 1T
devid 3 unallocated: 10T
We will get an array of:
RAID10: 2T
RAID1: 2T
RAID1C3: 1T
RAID1C4: 0 (not enough devices)
DUP: 6T
RAID0: 3T
SINGLE: 12T
RAID5: 2T
RAID6: 1T
[IMPLEMENTATION]
And for the each profile , we go chunk allocator level calculation:
The pseudo code looks like:
clear_virtual_used_space_of_all_rw_devices();
do {
/*
* The same as chunk allocator, despite used space,
* we also take virtual used space into consideration.
*/
sort_device_with_virtual_free_space();
/*
* Unlike chunk allocator, we don't need to bother hole/stripe
* size, so we use the smallest device to make sure we can
* allocated as many stripes as regular chunk allocator
*/
stripe_size = device_with_smallest_free->avail_space;
stripe_size = min(stripe_size, to_alloc / ndevs);
/*
* Allocate a virtual chunk, allocated virtual chunk will
* increase virtual used space, allow next iteration to
* properly emulate chunk allocator behavior.
*/
ret = alloc_virtual_chunk(stripe_size, &allocated_size);
if (ret == 0)
avail += allocated_size;
} while (ret == 0)
This minimal available space based calculation is not perfect, but the
important part is, the estimation is never exceeding the real available
space.
This patch just introduces the infrastructure, no hooks are executed
yet.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In do_allocation_zoned(), the code acquires space_info->lock before
block_group->lock. However, the critical section does not access or
modify any members of the space_info structure. Thus, the lock is
redundant as it provides no necessary synchronization here.
This change simplifies the locking logic and aligns the function with
other zoned paths, such as __btrfs_add_free_space_zoned(), which only
rely on block_group->lock. Since the 'space_info' local variable is
no longer used after removing the lock calls, it is also removed.
Removing this unnecessary lock reduces contention on the global
space_info lock, improving concurrency in the zoned allocation path.
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We check the minimum size of the sys chunk array in btrfs_validate_super()
but we have a better place for that, the helper validate_sys_chunk_array()
which we use for every other sys chunk array check. So move it there, also
converting the return error from -EINVAL to -EUCLEAN, which is a better
fit and also consistent with the other checks.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We check it twice, once in validate_sys_chunk_array() and then again in
its caller, btrfs_validate_super(), right after it calls
validate_sys_chunk_array(). So remove the duplicated check from
btrfs_validate_super().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The last argument of inc_block_group_ro() is defined as a boolean, but
every caller is passing an integer literal, 0 or 1 for false and true
respectively. While this is not incorrect, as 0 and 1 are converted to
false and true, it's less readable and somewhat awkward since the
argument is defined as boolean. Replace 0 and 1 with false and true.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a test function for the zoned code, for now it tests
btrfs_load_block_group_by_raid_type() with various test cases. The
load_zone_info_tests[] array defines the test cases.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules, similar
to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
-----BEGIN PGP SIGNATURE-----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=d0PH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules,
similar to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
* tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
ACPI: RIMT: Add dependency between iommu and devices
selftests: riscv: Add braces around EXPECT_EQ()
riscv: use _BITUL macro rather than BIT() in ptrace uapi and kselftests
riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set
riscv: make runtime const not usable by modules
riscv: patch: Avoid early phys_to_page()
riscv: kgdb: fix several debug register assignment bugs
In eb_lookup_vma(), the code checks that the context vm matches before
incrementing the i915 vma usage count, but for the non-matching case it
didn't clear the non-matching vma pointer, so it would then mistakenly
be returned, causing potential UaF and refcount issues.
Reported-by: Yassine Mounir <sosohero200@gmail.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix allocation in TLB uniquification
Fix SiByte cache initialisation
Check uart parameters from firmware on Loongson64 systems
Fix clock id mismatch for Ralink SoCs
Fix GCC version check for __mutli3 workaround
-----BEGIN PGP SIGNATURE-----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=1q4p
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_7.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix TLB uniquification for systems with TLB not initialised by
firmware
- Fix allocation in TLB uniquification
- Fix SiByte cache initialisation
- Check uart parameters from firmware on Loongson64 systems
- Fix clock id mismatch for Ralink SoCs
- Fix GCC version check for __mutli3 workaround
* tag 'mips-fixes_7.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: mm: Allocate tlb_vpn array atomically
MIPS: mm: Rewrite TLB uniquification for the hidden bit feature
MIPS: mm: Suppress TLB uniquification on EHINV hardware
MIPS: Always record SEGBITS in cpu_data.vmbits
MIPS: Fix the GCC version check for `__multi3' workaround
MIPS: SiByte: Bring back cache initialisation
mips: ralink: update CPU clock index
MIPS: Loongson64: env: Check UARTs passed by LEFI cautiously
Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding" things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIaEg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym34ACfTtx3DzFMxNmE2eQrvptvqmSeVEoAoIt9h9kF
pVDpO6Njqetq0zzWfBL3
=uv/h
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding"
things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues"
* tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (63 commits)
Documentation: fix two typos in latest update to the security report howto
Documentation: clarify the mandatory and desirable info for security reports
Documentation: explain how to find maintainers addresses for security reports
Documentation: minor updates to the security contacts
.get_maintainer.ignore: add myself
nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy
nvmem: imx: assign nvmem_cell_info::raw_len
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
misc: fastrpc: possible double-free of cctx->remote_heap
comedi: dt2815: add hardware detection to prevent crash
comedi: runflags cannot determine whether to reclaim chanlist
comedi: Reinit dev->spinlock between attachments to low-level drivers
comedi: me_daq: Fix potential overrun of firmware buffer
comedi: me4000: Fix potential overrun of firmware buffer
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
gpib: fix use-after-free in IO ioctl handlers
gpib: lpvo_usb: fix memory leak on disconnect
gpib: Fix fluke driver s390 compile issue
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
lis3lv02d: fix kernel-doc warnings
...
Here are 2 small tty vt fixes for 7.0-rc7 to resolve some reported
issues with the resize ability of the alt screen buffer. Both of these
have been in linux-next all week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIatA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqVQCfecM0mxjbI8EmKsfL6FtpAstcW1IAn2XwT7S0
ITAhHAylAuh3HHpXqRfi
=eulV
-----END PGP SIGNATURE-----
Merge tag 'tty-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are two small tty vt fixes for 7.0-rc7 to resolve some reported
issues with the resize ability of the alt screen buffer. Both of these
have been in linux-next all week with no reported issues"
* tag 'tty-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: resize saved unicode buffer on alt screen exit after resize
vt: discard stale unicode buffer on alt screen exit after resize
Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout to
Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here.)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding and
unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCadIdow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylTVQCfYg21ERvg753HnW1zbnzjMFlJZTQAoL+/0zeH
VcNijzt/8uiEKvQWAhcB
=BcZf
-----END PGP SIGNATURE-----
Merge tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout
to Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding
and unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little
beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems"
* tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
usb: core: use dedicated spinlock for offload state
usb: cdns3: gadget: fix state inconsistency on gadget init failure
usb: dwc3: imx8mp: fix memory leak on probe failure path
usb: gadget: f_uac1_legacy: validate control request size
usb: ulpi: fix double free in ulpi_register_interface() error path
usb: misc: usbio: Fix URB memory leak on submit failure
USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
usb: core: phy: avoid double use of 'usb3-phy'
USB: serial: option: add MeiG Smart SRM825WN
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
usb: gadget: f_subset: Fix net_device lifecycle with device_move
usb: gadget: f_eem: Fix net_device lifecycle with device_move
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
usb: gadget: u_ncm: Add kernel-doc comments for struct f_ncm_opts
usb: gadget: f_rndis: Protect RNDIS options with mutex
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
dt-bindings: connector: add pd-disable dependency
...
EPROBE_DEFER ensures IOMMU devices are probed before the devices that
depend on them. During shutdown, however, the IOMMU may be removed
first, leading to issues. To avoid this, a device link is added
which enforces the correct removal order.
Fixes: 8f77295525 ("ACPI: RISC-V: Add support for RIMT")
Signed-off-by: Sunil V L <sunilvl@oss.qualcomm.com>
Link: https://patch.msgid.link/20260303061605.722949-1-sunilvl@oss.qualcomm.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
EXPECT_EQ() expands to multiple lines, breaking up one-line if
statements. This issue was not present in the patch on the mailing list
but was instead introduced by the maintainer when attempting to fix up
checkpatch warnings. Add braces around EXPECT_EQ() to avoid the error
even though checkpatch suggests them to be removed:
validate_v_ptrace.c:626:17: error: ‘else’ without a previous ‘if’
Fixes: 3789d5eecd ("selftests: riscv: verify syscalls discard vector context")
Fixes: 30eb191c89 ("selftests: riscv: verify ptrace rejects invalid vector csr inputs")
Fixes: 849f05ae1e ("selftests: riscv: verify ptrace accepts valid vector csr values")
Signed-off-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Reviewed-and-tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Link: https://patch.msgid.link/20260309-fix_selftests-v2-2-9d5a553a531e@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
In set_tagged_addr_ctrl(), when PR_TAGGED_ADDR_ENABLE is not set, pmlen
is correctly set to 0, but it forgets to reset pmm. This results in the
CPU pmm state not corresponding to the software pmlen state.
Fix this by resetting pmm along with pmlen.
Fixes: 2e17430858 ("riscv: Add support for the tagged address ABI")
Signed-off-by: Zishun Yi <vulab@iscas.ac.cn>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://patch.msgid.link/20260322160022.21908-1-vulab@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Similar as commit 284922f4c5 ("x86: uaccess: don't use runtime-const
rewriting in modules") does, make riscv's runtime const not usable by
modules too, to "make sure this doesn't get forgotten the next time
somebody wants to do runtime constant optimizations". The reason is
well explained in the above commit: "The runtime-const infrastructure
was never designed to handle the modular case, because the constant
fixup is only done at boot time for core kernel code."
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260221023731.3476-1-jszhang@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Similarly to commit 8d09e2d569 ("arm64: patching: avoid early
page_to_phys()"), avoid using phys_to_page() for the kernel address case
in patch_map().
Since this is called from apply_boot_alternatives() in setup_arch(), and
commit 4267739cab ("arch, mm: consolidate initialization of SPARSE
memory model") has moved sparse_init() to after setup_arch(),
phys_to_page() is not available there yet, and it panics on boot with
SPARSEMEM on RV32, which does not use SPARSEMEM_VMEMMAP.
Reported-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Closes: https://lore.kernel.org/r/20260223144108-dcace0b9-02e8-4b67-a7ce-f263bed36f26@linutronix.de/
Fixes: 4267739cab ("arch, mm: consolidate initialization of SPARSE memory model")
Suggested-by: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20260310-riscv-sparsemem-alternatives-fix-v1-1-659d5dd257e2@iscas.ac.cn
[pjw@kernel.org: fix the subject line to align with the patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Fix several bugs in the RISC-V kgdb implementation:
- The element of dbg_reg_def[] that is supposed to pertain to the S1
register embeds instead the struct pt_regs offset of the A1
register. Fix this to use the S1 register offset in struct pt_regs.
- The sleeping_thread_to_gdb_regs() function copies the value of the
S10 register into the gdb_regs[] array element meant for the S9
register, and copies the value of the S11 register into the array
element meant for the S10 register. It also neglects to copy the
value of the S11 register. Fix all of these issues.
Fixes: fe89bd2be8 ("riscv: Add KGDB support")
Cc: Vincent Chen <vincent.chen@sifive.com>
Link: https://patch.msgid.link/fde376f8-bcfd-bfe4-e467-07d8f7608d05@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
- new IDs for BETOP BTP-KP50B/C and Razer Wolverine V3 Pro added to
xpad controller driver
- another quirk for new TUXEDO InfinityBook added to i8042
- a small fixup for Synaptics RMI4 driver to properly unlock mutex when
encountering an error in F54
- an update to bcm5974 touch controller driver to reliably switch into
wellspring mode.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCadCpLQAKCRBAj56VGEWX
nDgsAP0UYEFs1rFYYESyaTJVkbUg1DVxbqzFkL69MJasfFDLRQD/dM3ZECzCatiU
IIOXbWw+0kwNR3bysSp3RQ2jQoeS6gQ=
=Rs1H
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- new IDs for BETOP BTP-KP50B/C and Razer Wolverine V3 Pro added to
xpad controller driver
- another quirk for new TUXEDO InfinityBook added to i8042
- a small fixup for Synaptics RMI4 driver to properly unlock mutex when
encountering an error in F54
- an update to bcm5974 touch controller driver to reliably switch into
wellspring mode
* tag 'input-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - add support for BETOP BTP-KP50B/C controller's wireless mode
Input: xpad - add support for Razer Wolverine V3 Pro
Input: synaptics-rmi4 - fix a locking bug in an error path
Input: i8042 - add TUXEDO InfinityBook Max 16 Gen10 AMD to i8042 quirk table
Input: bcm5974 - recover from failed mode switch
In previous patch "Documentation: clarify the mandatory and desirable
info for security reports" I left two typos that I didn't detect in local
checks. One is "get_maintainers.pl" (no 's' in the script name), and the
other one is a missing closing quote after "Reported-by", which didn't
have effect here but I don't know if it can break rendering elsewhere
(e.g. on the public HTML page). Better fix it before it gets merged.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404082033.5160-1-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add device IDs for the Razer Wolverine V3 Pro controller in both
wired (0x0a57) and wireless 2.4 GHz dongle (0x0a59) modes.
The controller uses the Xbox 360 protocol (vendor-specific class,
subclass 93, protocol 1) on interface 0 with an identical 20-byte
input report layout, so no additional processing is needed.
Signed-off-by: Zoltan Illes <zoliviragh@gmail.com>
Link: https://patch.msgid.link/20260329220031.1325509-1-137647604+ZlordHUN@users.noreply.github.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Fix a memory leak in the zcrypt driver where the AP message buffer
for clear key RSA requests was allocated twice, once by the caller
and again locally, causing the first allocation to never be freed
- Fix the cpum_sf perf sampling rate overflow adjustment to clamp the
recalculated rate to the hardware maximum, preventing exceptions on
heavily loaded systems running with HZ=1000
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmnQWDUACgkQjYWKoQLX
FBidQwf+NJmlDVst1/7Gv75p7Cf5o00cmkJ5zj/EUTRqNCFUFNXx/AUFDbNJ4U2C
EsnDOePbVX/5yFWtEB+WDIDNZh9NOaDdH8w89AxkjRsTQ5NliJN7mFm4K9CFi+O+
ytI2z9Ai+6zQG04euo+dsA8BuWLki3TsLA6o1ygP+3zCpV1BPw0Q39djb3rVJRPq
lP33fBXruqXtbqv3oOlCAiL8mKtZymvJL3aMNY0PPlk3h23tIsGZOfwjd9aekkOh
wRs4ijXRtu884xIQdZ3shgfyXgsJWPY0dApUBTRBqt+FSKiwxdMqg3Hx3VYEo/IQ
zNt1OQRbEPX41fJxQWNTlxf0+C67TQ==
=LXck
-----END PGP SIGNATURE-----
Merge tag 's390-7.0-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix a memory leak in the zcrypt driver where the AP message buffer
for clear key RSA requests was allocated twice, once by the caller
and again locally, causing the first allocation to never be freed
- Fix the cpum_sf perf sampling rate overflow adjustment to clamp the
recalculated rate to the hardware maximum, preventing exceptions on
heavily loaded systems running with HZ=1000
* tag 's390-7.0-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix memory leak with CCA cards used as accelerator
s390/cpum_sf: Cap sampling rate to prevent lsctl exception
- asus-ec-sensors: Fix temperature sensor for PRIME X670E-PRO WIFI
- occ: Add missing newline, and fix potential division by zero
- pmbus/tps53679: Fix device ID comparison and printing in tps53676_identify()
- pmbus/ltc4286: Add missing MODULE_IMPORT_NS("PMBUS")
- pmbus/pxe1610: Check return value of page-select write in probe
- pmbus/tps53679: Fix array access with zero-length block read
-----BEGIN PGP SIGNATURE-----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=tqhk
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix temperature sensor for PRIME X670E-PRO WIFI
- occ: Add missing newline, and fix potential division by zero
- pmbus:
- Fix device ID comparison and printing in tps53676_identify()
- Add missing MODULE_IMPORT_NS("PMBUS") for ltc4286
- Check return value of page-select write in pxe1610 probe
- Fix array access with zero-length block tps53679 read
* tag 'hwmon-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) Fix T_Sensor for PRIME X670E-PRO WIFI
hwmon: (occ) Fix missing newline in occ_show_extended()
hwmon: (occ) Fix division by zero in occ_show_power_1()
hwmon: (tps53679) Fix device ID comparison and printing in tps53676_identify()
hwmon: (ltc4286) Add missing MODULE_IMPORT_NS("PMBUS")
hwmon: (pxe1610) Check return value of page-select write in probe
hwmon: (tps53679) Fix array access with zero-length block read
- Fix stale direct dispatch state in ddsp_dsq_id which can cause
spurious warnings in mark_direct_dispatch() on task wakeup.
- Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU
configs which can lead to incorrectly dispatching migration-disabled
tasks to remote CPUs.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCac//0w4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGdqUAP9kEuxvB+pxjheSKV0j7zvDHd+ksMxjQTRoBmyu
PE0hIgEA5gAax8ebef9MlyRVsm9Qh7v/AmovUHt75oeCnDk++Ag=
=hD7A
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"These are late but both fix subtle yet critical problems and the blast
radius is limited strictly to sched_ext.
- Fix stale direct dispatch state in ddsp_dsq_id which can cause
spurious warnings in mark_direct_dispatch() on task wakeup
- Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU
configs which can lead to incorrectly dispatching migration-
disabled tasks to remote CPUs"
* tag 'sched_ext-for-7.0-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix stale direct dispatch state in ddsp_dsq_id
sched_ext: Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU
-----BEGIN PGP SIGNATURE-----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=q/wK
-----END PGP SIGNATURE-----
Merge tag 'io_uring-7.0-20260403' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- A previous fix in this release covered the case of the rings being
RCU protected during resize, but it missed a few spots. This covers
the rest
- Fix the cBPF filters when COW'ed, introduced in this merge window
- Fix for an attempt to import a zero sized buffer
- Fix for a missing clamp in importing bundle buffers
* tag 'io_uring-7.0-20260403' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/bpf_filters: retain COW'ed settings on parse failures
io_uring: protect remaining lockless ctx->rings accesses with RCU
io_uring/rsrc: reject zero-length fixed buffer import
io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs()
A small collection of fixes, mostly probe/remove issues that are the
result of Felix Gu going and auditing those areas, plus one error
handling fix for the Cadence QSPI driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmnPsaEACgkQJNaLcl1U
h9CzHAf/aYcrS0+CYPAySz09sAWRDrsecvEq1/k682yVVQifut9ydJSsnqN8T+HM
k6OJt24k94r8v92NjU3LCXw0slsQFvKGRMmWw6BvBcXqCIe+QUTlYjmrtLPVP3eq
FKZA1zdUAWNxYeYTgi0bJaHTLkpmQQjnPtk6CDpYwRTUH1lz5Jy/wxPY0n6V7wgi
IK6xqbDS9XK8Jka/F30Ofh4cOzggeFy/x/cVdNavJeiJJWaa8n1lpfHgi3CpOqph
aoiuWH/vGOP5N2vDsTplL0mEUdY90MbSJKg6R7F3cL0lO0QmdHz++DXkDK3OL/ee
ppNJE3VVsNk7Xnft/DOYRuMedNr75g==
=7kY4
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes, mostly probe/remove issues that are the
result of Felix Gu going and auditing those areas, plus one error
handling fix for the Cadence QSPI driver"
* tag 'spi-fix-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-qspi: Fix exec_mem_op error handling
spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback
spi: stm32-ospi: Fix DMA channel leak on stm32_ospi_dma_setup() failure
spi: stm32-ospi: Fix reset control leak on probe error
spi: stm32-ospi: Fix resource leak in remove() callback
