register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps.
Fixes: 8857433245 ("crypto: keembay - Add support for Keem Bay OCS AES/SM4")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
rk_hash_run() waits for RK_CRYPTO_HASH_STS to become idle after the
final DMA transfer, but ignores the poll result. If the hash engine
never becomes idle, the driver still reads the digest registers and
finalizes the request with the previous success value.
Store the poll result and finalize the request with the timeout error
before reading the digest registers.
Fixes: 37bc22159c ("crypto: rockchip - use read_poll_timeout")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
omap_rng_probe() enables runtime PM before acquiring and enabling the
functional clocks. Several later error paths returned or unwound without
undoing all state acquired so far.
If pm_runtime_resume_and_get() failed, the driver returned through the
generic ioremap error label and left runtime PM enabled. If either clock
lookup returned -EPROBE_DEFER, the function returned directly and skipped
the runtime PM cleanup; the register clock defer path could also leave the
already enabled functional clock prepared.
Route these failures through the existing unwind labels so each path only
undoes resources that were acquired successfully. Keep the resume failure
path limited to pm_runtime_disable(), and use the later labels only after
the runtime PM usage count or clocks have been acquired.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: 61dc0a446e ("hwrng: omap - Fix assumption that runtime_get_sync will always succeed")
Fixes: 43ec540e6f ("hwrng: omap - move clock related code to omap_rng_probe()")
Fixes: b166be0044 ("hwrng: omap - Fix clock resource by adding a register clock")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
xtrng_readblock32() polls for 16-byte chunks but returns the number of
bytes read even when the first poll times out. Its caller then treats a
zero return as a short successful read, and partial reads for full
32-byte blocks can make the tail copy use a fixed block offset rather
than the amount already produced.
Return the poll error when no data has been read, preserve partial
positive returns after some data is available, stop the generator on all
collection exits, and append tail bytes at the current output count.
Fixes: 8979744aca ("crypto: xilinx - Add TRNG driver for Versal")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
AF_ALG is a frequent source of vulnerabilities and a maintenance
nightmare. It exposes far more functionality to userspace than ever
should have been exposed, especially to unprivileged processes. Recent
exploits have targeted kernel internal implementation details like
"authencesn" that have zero use case for userspace access.
Fortunately, AF_ALG is rarely used in practice, as userspace crypto
libraries exist. And when it is used, only some functionality is known
to be used, and many users are known to hold capabilities already.
iwd for example requires CAP_NET_ADMIN and has a known algorithm list
(https://lore.kernel.org/linux-crypto/bcbbef00-5881-421b-8892-7be6c04b832d@gmail.com/).
Thus, let's restrict the set of allowed algorithms by default, depending
on the capabilities held.
Add a sysctl /proc/sys/crypto/af_alg_restrict with meaning:
0: unrestricted
1: limited functionality
2: completely disabled
Set the default value to 1, which enables an algorithm allowlist for
unprivileged processes and a slightly longer allowlist for privileged
processes.
Note that the list may be tweaked in the future. However, the common
use cases such as iwd and bluez are taken into account already. I've
tested that iwd still works with the default value of 1.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove algorithms that are either unsafe or deprecated and have no
in-kernel users that cannot be served by the ARM CE implementations.
AES-ECB reveals plaintext patterns (identical plaintext blocks produce
identical ciphertext blocks) and should not be exposed as a hardware-
accelerated primitive. DES, Triple DES and HMAC-SHA1 have been
deprecated for years.
Remove sha1, ecb(aes), ecb(des), cbc(des), ecb(des3_ede), cbc(des3_ede),
hmac(sha1) and all AEAD variants built on these primitives as well as
authenc(hmac(sha256),cbc(des)). Also clean up the - now dead - code,
flags and constants.
Cc: stable@vger.kernel.org
Acked-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source
scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid
and could return zero or a stale DMA length, causing encryption and
decryption to process the wrong number of bytes when
CONFIG_NEED_SG_DMA_LENGTH=y.
Use the original scatterlist length instead.
Fixes: 15b59e7c37 ("crypto: mxs - Add Freescale MXS DCP driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sa_ul_probe() calls sa_init_mem() to create the DMA pool used for
security context buffers, but ignores its return value. If pool creation
fails, probe still continues with DMA setup, algorithm registration and
child population even though later request setup depends on that pool.
Stop probing when sa_init_mem() fails, and route that failure to the PM
cleanup path without attempting to destroy an uncreated DMA pool.
Fixes: 7694b6ca64 ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the CAAM
support which is one of the only remaining ones.
Note that the CAAM support for hwrng remains in place. That is the
interface that actually matters.
Note that this code also had several issues, including dlen > 65535
causing corruption of the CAAM descriptor.
Cc: Gaurav Jain <gaurav.jain@nxp.com>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ss support which is one of the only remaining ones.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. Also, it had a buffer
overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'.
There's no point in fixing these bugs separately only to remove the code
anyway, so this commit is marked with Fixes and Cc stable.
Fixes: ac2614d721 ("crypto: sun8i-ss - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the crypto_rng interface for hardware PRNGs is unused and is
redundant with hwrng and the actual Linux RNG, it's being phased out.
Most drivers for it were already removed. Go ahead and remove the
sun8i-ce support which is one of the only remaining ones.
Note that the sun8i-ce support for hwrng remains in place. That is the
interface that actually matters.
As usual for crypto_rng, this driver was also buggy: its ->generate()
function had a use-after-free vulnerability due to using
wait_for_completion_interruptible_timeout() without handling shutting
down the DMA operation if a signal is sent. There's no point in fixing
this separately only to remove the code anyway, so this commit is marked
with Fixes and Cc stable.
Fixes: 5eb7e94688 ("crypto: sun8i-ce - Add support for the PRNG")
Cc: stable@vger.kernel.org
Cc: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEV-SNP firmware provides the SNP_VERIFY_MITIGATION command, which
can be used to query the status of currently supported vulnerability
mitigations and to initiate mitigations within the firmware.
This command is an explicit mechanism to ascertain if a firmware
mitigation is applied without needing a full RMP re-build, which is most
useful in a live firmware update scenario.
The firmware supports two subcommands: STATUS and VERIFY. The STATUS
subcommand is used to query the supported and verified mitigation bits.
The VERIFY subcommand initiates the mitigation process within the FW for
the specified vulnerability. Expose a userspace interface under:
/sys/firmware/sev/vulnerabilities/
- supported_mitigations (read-only): supported mitigation vector mask
- verified_mitigations (read/write): current verified mask; write a
vector to request VERIFY for that bit
The behavior of SNP_VERIFY_MITIGATION and the pre-requisites for using
it are bug-specific. Information about supported mitigations and its
corresponding vector is to be published as part of the AMD Security
Bulletin.
See SEV-SNP Firmware ABI specifications 1.58, SNP_VERIFY_MITIGATION for
more details.
Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit df12ef60c8 ("crypto: qce/sha - Do not modify scatterlist passed
along with request") removed the only use of sg_last, rendering the
scatterlist traversal useless. Remove it and its local variables.
Also remove the redundant hash_later check, inline the source offset,
and assign the number of complete blocks directly to req->nbytes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's no need for devm_platform_ioremap_resource() to be so far down.
In fact, putting it up allows direct return instead of having to goto
some branch. Also, remove the error message as the function complains
loudly itself. No need to duplicate.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The nonblocking RNG path allocates a work_data structure to track the
state of an in-flight asynchronous I2C request. This pointer is stored
in rng->priv and later consumed by the read path once the transaction
completes.
If the underlying I2C transfer fails, the completion callback is invoked
with a non-zero status. In this case, the allocated work_data is not
usable for producing RNG output and must not remain associated with the
hwrng state.
Previously, the failure path only logged a warning but left the pointer
state uncleared, which can result in subsequent read attempts observing
stale state and interpreting it as valid completion data.
Fix this by freeing the pending work_data. The I2C transaction reports
an error. This ensures that failed requests do not leave residual state
behind that could be interpreted as valid RNG data on later reads.
Clearing rng->priv is done at the subsequent call to nonblocking read.
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Assisted-by: Gemini:1.5 Pro [google]
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware ECDH path in atmel_ecdh_compute_shared_secret() uses the
private key stored in the device. However, the public key is cached only
after atmel_ecdh_set_secret() successfully generated that private key
for the current tfm.
atmel_ecdh_generate_public_key() already rejects requests when no public
key is cached. Add the same check to atmel_ecdh_compute_shared_secret()
to prevent the device from using a private key that was not generated
for the current tfm.
Fixes: 11105693fa ("crypto: atmel-ecc - introduce Microchip / Atmel ECC driver")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
->curve_id is only set once, but never used - remove it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using sg_dma_len() is only valid after mapping the scatterlist with
dma_map_sg(). However, atmel_tdes_crypt_start() uses it before mapping
to compare input/output lengths and to compute the transfer count.
Use the original scatterlist lengths before DMA mapping to avoid reading
stale or uninitialized DMA lengths when CONFIG_NEED_SG_DMA_LENGTH=y.
Drop the output scatterlist length in the fast path since it is equal to
->in_sg->length and does not change the transfer count.
Fixes: 13802005d8 ("crypto: atmel - add Atmel DES/TDES driver")
Fixes: 1f858040c2 ("crypto: atmel-tdes - add support for latest release of the IP (0x700)")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add Chenghai Huang as the maintainer of the hisilicon zip driver,
replacing Yang Shen.
Signed-off-by: Chenghai Huang<huangchenghai2@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Improve the kerneldoc for struct atmel_ecdh_ctx by removing the stale
"unsupported curves" wording, since the device only supports a single
curve (P-256), and move the set_secret() constraint to the description.
In atmel_ecdh_set_secret(), clarify that the device generates the
private key, and drop the redundant "only supports NIST P256" comment.
In atmel_ecdh_done() and atmel_ecdh_generate_public_key(), clarify the
truncation comments. Also note that a P-256 public key consists of two
32-byte coordinates in atmel_ecdh_compute_shared_secret(), and remove
the unnecessary fall-through comment and other redundant comments.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clarify that a P-256 public key is encoded as two 32-byte coordinates.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since this file just implements a hwrng driver, move it into
drivers/char/hw_random/. Rename the kconfig option accordingly as well.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
qcom-rng.c exposes the same hardware through two completely separate
interfaces, crypto_rng and hwrng. However, the implementation of this
is buggy because it permits generation operations from these interfaces
to run concurrently with each other, accessing the same registers. That
is, qcom_rng_generate() synchronizes with itself but not with
qcom_hwrng_read(). This results in potential repetition of output from
the RNG, output of non-random values, etc.
Fortunately, there's actually no point in hardware RNG drivers
implementing the crypto_rng interface. It's not actually used by
anything besides the "rng" algorithm type of AF_ALG, which in turn is
not actually used in practice. Other crypto_rng hardware drivers are
likewise being phased out, leaving just the hwrng support.
Thus, remove it to simplify the code and avoid conflict (and confusion)
with the hwrng interface which is the one that actually matters.
Fixes: f29cd5bb64 ("crypto: qcom-rng - Add hw_random interface support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zero is a valid random number and needs to be allowed. Otherwise the
output is distinguishable from random.
Fixes: f29cd5bb64 ("crypto: qcom-rng - Add hw_random interface support")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
qat_alg_xts_reverse_key() expands the forward XTS AES key on the stack.
That schedule contains key material and can remain in the stack frame.
Clear the temporary crypto_aes_ctx with memzero_explicit() after the copy.
Fixes: 5106dfeaea ("crypto: qat - add AES-XTS support for QAT GEN4 devices")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The QAT reset worker queues SR-IOV reenable work using a work_struct and
completion embedded in an on-stack adf_sriov_dev_data. If the completion
wait times out, the reset worker can return while device_sriov_wq still
holds or executes the stack-backed work item.
Cancel the work on the device_sriov_wq on timeout before the stack frame
unwinds.
Fixes: 4469f9b234 ("crypto: qat - re-enable sriov after pf reset")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the software carry flag emulation with compiler builtins.
Even the newest compilers struggle with taking advantage of the
hardware carry flag. Compiler builtins allow the compiler to
much more easily achieve this while still remaining constant-time.
This yields an approximately 6-7% performance improvement
on the ecc_gen_privkey, ecc_make_pub_key and crypto_ecdh_shared_secret
functions on x86_64 on all curve sizes.
Additionally, the code becomes much more readable.
Signed-off-by: Fabian Blatter <fabianblatter09@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since atmel_trng_driver keeps atmel_trng_pm_ops referenced and pm_ptr()
uses IS_ENABLED(), which allows the compiler to optimize away unused
variables, drop the redundant __maybe_unused annotation.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To simplify the code, drop explicit and hard-coded size arguments from
strscpy() where the destination buffer has a fixed size and strscpy()
can automatically determine it using sizeof().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hwrng_register(rng) does the following:
1. Checks if rng has name and read methods set
2. Checks if the name already exists
3. Adds rng to global rng_list
4. May try to set rng to current_rng
If step 4 fails, it returns an error. However, it does not remove the
rng from rng_list, causing a dangling reference which can result in
use-after-free if the caller frees rng, since registration failed.
Add a list_del_init() cleanup step.
Fixes: 2bbb698388 ("hwrng: use rng source with best quality")
Signed-off-by: Manos Pitsidianakis <manos@pitsidianak.is>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add inclusions for irq_work.h and workqueue.h to rhashtable.c rather
than relying on indirect inclusions from elsewhere.
Remove workqueue.h from rhashtable.h now that it uses IRQ work only.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
device removal, along with documentation fixes and minor AMD driver
cleanups.
-----BEGIN PGP SIGNATURE-----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=V3cD
-----END PGP SIGNATURE-----
Merge tag 'ntb-7.2' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"An EPF bug fix to prevent an invalid unmap during device removal,
along with documentation fixes and minor AMD driver cleanups"
* tag 'ntb-7.2' of https://github.com/jonmason/ntb:
ntb: amd: Use named initializer for pci_device_id::driver_data
NTB: fix kernel-doc warnings in ntb.h
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
ntb_hw_amd: Fix incorrect debug message in link disable path
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in
F30 and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCakCsxwAKCRBAj56VGEWX
nCICAQDSgfrAi+4SqTb92EjtdQO+ypluS42mKO75LTitJcS8dAEA1iKmdss8mGww
c4ai4W+UFxori7IqgkoQ7LfaPTOWlA0=
=QP4c
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in F30
and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
* tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gscps2 - advance receive buffer write index
Input: rmi4 - tolerate short register descriptor structure
Revert "Input: rmi4 - fix register descriptor address calculation"
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
Two more fixes that I managed to put into the public branch merged into
next before my first PR but missed to include them in it. The first
change is a relevant change that fixes misconfigurations due to a
variable overflow. The 2nd is only cosmetic but very obviously an
improvement.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmpAE2gACgkQj4D7WH0S
/k7tnAgAsjkBQWoav1MF8kyVzew+iIuVvBrtUPimzeMs2gzwC1czi/TPKCvZxGND
XaPESmf51lC9AZuFd/2Wfvb2GydxA/wmsbVB0Q6ZBwLtS6/L4yiv3DpYN2to9yWN
QvVHeVCBdSbMHOQXdG0iFbhMiLyUX5YwCwyZT2cuVUHb4gvNLuDuKbgSXX9Odh1R
/p9C0afNMbdxuj2yRy+S8CM5Rl5v4yfBw6cswKX6w3uA+LnvksWuC8og7tEfFa/F
Vdwy4csWeKHGm7jEP9o6iSlWYy+DMKf5Llop+yFLZV6Db6AXMlEpNOXJsGxEv95y
qMTQFCGhepNWqVuUDDOOeUs60Asjpg==
=0WY9
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two more fixes that I managed to put into the public branch merged
into next before my first pull request but missed to include them in
it.
The first change is a relevant change that fixes misconfigurations due
to a variable overflow. The second is only cosmetic but very obviously
an improvement"
* tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: rzg2l-gpt: Add missing newlines to dev_err_probe() messages
pwm: rzg2l-gpt: Fix period_ticks type from u32 to u64
Fixes:
- fbcon: fix NULL pointer dereference for a console without vc_data [Ian Bridges]
- fbdev: fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var [Ian Bridges]
Fixes in failure paths:
- pm2fb: unwind write-cache setting on probe failure [Haoxiang Li]
- goldfishfb: fail pan display on base-update timeout [Pengpeng Hou]
- viafb: return error on DMA copy time-out [Pengpeng Hou]
- fbcon: fix out-of-bounds read in error path of fbcon_do_set_font() [Mingyu Wang]
- fbdev: fix modelist use-after-free in store_modes() [Ian Bridges]
Code cleanup:
- vga16fb: clean up platform_device_id table [Uwe Kleine-König]
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCakAKnwAKCRD3ErUQojoP
X27+AQCPvMJUMScjO1dlGKkPnnIFiOWCU6AW1aM2m6T+qWrCTQEAnNi5CCI3JiLi
6NCcyPm7/4R6tSXDm+UcWJ5tyzaNvww=
=EBHb
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull more fbdev updates from Helge Deller:
"Fixes for generic fbdev & fbcon code for the handling of modelists
and preventing a potential NULL ptr dereference in the console code.
Fix missed cleanups in the error path of various fbdev drivers.
And Uwe Kleine-König contributed a cleanup patch to use named
initializers in the vga16fb driver"
* tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
fbcon: fix NULL pointer dereference for a console without vc_data
fbdev: fix use-after-free in store_modes()
fbdev: viafb: return an error when DMA copy times out
fbdev: goldfishfb: fail pan display on base-update timeout
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
fbdev: pm2fb: unwind WC setup on probe failure
fbdev: vga16fb: Drop unused assignment of platform_device_id driver data
A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments caiaq
/ Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight
-----BEGIN PGP SIGNATURE-----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=hJ5w
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for ds1307,
fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes
-----BEGIN PGP SIGNATURE-----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=SCOZ
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
- Fix a bug where in a specific edge case, file contents en/decryption
could be done with the wrong data unit size.
- Fix the data structure used for keeping track of users that have added
an fscrypt key to be a simple list instead of a 'struct key' keyring.
This fixes issues such as a lockdep report found by syzbot and
possible unintended interactions with the keyctl() system calls.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaj8bBhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOKyhIAP47lR+H783gopiz10Z7dwLQr2EHMfZ1
NcU7Zfq++AzZRQD/Tvv9/daqSh0OJTDNkBskSgVj6z7sRlQVNHY0wrD+QwE=
=LWES
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt fixes from Eric Biggers:
- Fix a bug where in a specific edge case, file contents en/decryption
could be done with the wrong data unit size
- Fix the data structure used for keeping track of users that have
added an fscrypt key to be a simple list instead of a 'struct key'
keyring
This fixes issues such as a lockdep report found by syzbot and
possible unintended interactions with the keyctl() system calls
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Replace mk_users keyring with simple list
fscrypt: Fix key setup in edge case with multiple data unit sizes
Commit 44f9200699 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().
While moving the code, it preserved the writes to
buffer[ps2port->append], but omitted the following producer index
update from the original loop:
ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.
Restore the omitted index update.
Fixes: 44f9200699 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some touchpads (e.g. ThinkPad T14 Gen 1) have buggy firmware that reports
a register descriptor structure size that is too small for the number of
registers it claims to have in the presence map. The remaining bytes in
the structure are 0, which with the new strict bounds checking causes the
parser to fail with -EIO, aborting the device probe.
Tolerate such short reads by dropping the remaining (unparseable or
0-size) registers from the list instead of failing the probe,
preventing the driver from trying to use them.
Fixes: 0adb483fbf ("Input: rmi4 - refactor register descriptor parsing")
Reported-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The register descriptor presence register is a packet register, which
means its bytes share a single RMI address. It does not occupy
consecutive addresses, and the register structure that follows it
is located at the next RMI address (presence_address + 1), not
(presence_address + presence_size).
Revert the incorrect address calculation introduced in commit
a98518e724.
Reported-by: "Barry K. Nathan" <barryn@pobox.com>
Tested-by: "Barry K. Nathan" <barryn@pobox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current list initialisation depends on the well hidden two zeros in
the PCI_VDEVICE macro. Instead use a named initialisation that is more
robust and easier to understand.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
