Use min() to replace the open-coded version and assign the result
directly to kbuf.bufsz. Drop the now-unused local size variable.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260602224725.1088385-3-thorsten.blum@linux.dev
Signed-off-by: Paul Walmsley <pjw@kernel.org>
init_irq_stacks() and init_irq_scs() may fail when arch_alloc_vmap_stack
or scs_alloc return NULL, call panic() in this case.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Link: https://patch.msgid.link/20260404185522.21767-1-osama.abdelkader@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Svvptc does not guarantee that it's safe to just return here. Since we
have already cleared our bit, if, theoretically, the bounded timeframe
for the accessed page to become valid still hasn't happened after sret,
we could fault again and actually crash.
Hopefully, these spurious faults should be rare enough that this is an
acceptable slowdown.
Cc: stable@vger.kernel.org
Fixes: 503638e0ba ("riscv: Stop emitting preventive sfence.vma for new vmalloc mappings")
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20260303-handle-kfence-protect-spurious-fault-v2-5-f80d8354d79d@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Since this mechanism is now used for the kfence pool, which comes from
the linear mapping and not vmalloc, rename new_vmalloc into
new_valid_map_cpus to avoid misleading readers.
No functional change intended.
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20260303-handle-kfence-protect-spurious-fault-v2-3-f80d8354d79d@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
In kfence_protect_page(), which kfence_unprotect() calls, we cannot send
IPIs to other CPUs to ask them to flush TLB. This may lead to those CPUs
spuriously faulting on a recently allocated kfence object despite it
being valid, leading to false positive use-after-free reports.
Fix this by calling mark_new_valid_map() so that the page fault handling
code path notices the spurious fault and flushes TLB then retries the
access.
Update the comment in handle_exception to indicate that
new_valid_map_cpus_check also handles kfence_unprotect() spurious
faults.
Note that kfence_protect() has the same stale TLB entries problem, but
that leads to false negatives, which is fine with kfence.
Cc: stable@vger.kernel.org
Reported-by: Yanko Kaneti <yaneti@declera.com>
Fixes: b3431a8bb3 ("riscv: Fix IPIs usage in kfence_protect_page()")
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20260303-handle-kfence-protect-spurious-fault-v2-2-f80d8354d79d@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
In the non-frame-pointer version of walk_stackframe, each value read
from the stack is treated as a potential return address and has 0x4
subtracted before being used as the program counter. This was intended
to convert the return address (the instruction after a call) back to
the call site, but it is incorrect:
1. RISC-V has variable-length instructions due to the RVC (compressed
instruction) extension. A call instruction can be either 4 bytes
(regular) or 2 bytes (compressed, e.g. c.jal). Subtracting a fixed
0x4 assumes all call instructions are 4 bytes, which is wrong for
compressed instructions.
2. Stack traces conventionally report return addresses, not call sites.
Other architectures (ARM64, x86, ARM) do not subtract instruction
size from return addresses in their stack unwinding code.
3. The frame-pointer version of walk_stackframe already dropped the
-0x4 offset. Commit b785ec129b ("riscv/ftrace: Add
HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support") replaced "pc =
frame->ra - 0x4" with ftrace_graph_ret_addr(), and the commit
message explicitly noted that "the original calculation, pc =
frame->ra - 4, is buggy when the instruction at the return address
happened to be a compressed inst." The non-FP version was simply
overlooked.
Remove the bogus -0x4 offset to match the FP version and the
conventions used by other architectures.
Fixes: 5d8544e2d0 ("RISC-V: Generic library routines and assembly")
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Link: https://patch.msgid.link/20260603115329.791603-2-qirui.001@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Currently, the while loop drops the reference to prev in each iteration.
If the loop terminates early due to a break, the final of_node_put(np)
correctly drops the reference to the current node.
However, if the loop terminates naturally because np == NULL, calling
of_node_put(np) is a no-op. This leaves the last valid node stored in
prev without its reference dropped, resulting in a node reference leak.
Fix this by changing the final `of_node_put(np)` to `of_node_put(prev)`.
Fixes: 94f9bf118f ("RISC-V: Fix of_node_* refcount")
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Zishun Yi <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260509074040.1747800-1-vulab@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When kexec_file_load places segments with buf_max=ULONG_MAX and
top_down=true, they land at the highest available physical addresses.
On RISC-V the size of the linear mapping is determined by the active
VM mode: SV39 caps the direct map at roughly 128GB, while SV48/SV57
extend the range substantially further. When the installed physical
memory exceeds the direct map size of the active mode, top-down
placement puts DTB/initrd at physical addresses outside the linearly
mapped region. The kexec'd kernel cannot reach them during early
boot, triggering a page fault at memcmp in start_kernel.
Fix by constraining buf_max to PFN_PHYS(max_low_pfn), which reflects
the runtime direct map boundary for the active VM mode (SV39/SV48/
SV57). This keeps all kexec segments within the linearly mapped
region while preserving the upstream top_down allocation strategy.
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20260519170641.123517-1-gaohan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
On RISC-V, the actual mappable range of physical address space is
dependent on the current MMU mode i.e. satp_mode (See
Documentation/arch/riscv/vm-layout.rst).
Define the DIRECT_MAP_PHYSMEM_END macro based on the existing virtual
address space layout macros to expose this information to
get_free_mem_region(). Otherwise, it returns a region that couldn't be
mapped, which breaks ZONE_DEVICE.
Cc: stable@vger.kernel.org # v6.13+
Tested-by: Han Gao <gaohan@iscas.ac.cn> # SG2044
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20260309-riscv-sparsemem-vmemmap-limits-v1-2-f40efe18e3cd@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
If the ret.error equals to 0, the sbi_err_map_linux_errno() can also
handle it, i.e. if ret.error is SBI_SUCCESS, it will return 0
immediately, so no need to be bothered to check ret.error here.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://patch.msgid.link/20260413123515.48423-2-hui.wang@canonical.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
In the original sbi_cpu_is_stopped(), if rc doesn't equal to the
SBI_HSM_STATE_STOPPED, it will return rc to the caller directly. But
there is a hidden problem, the rc could be SBI_HSM_STATE_STARTED, if
so, this function will report cpu stopped while the cpu isn't really
stopped.
Furthermore, from the name of cpu_is_stopped(), it gives a sense the
return value is a bool type, true means the cpu is stopped, conversely
false means the cpu is not stopped.
Here change the return value type to bool and change the callers
accordingly. This could fix the above two issues.
Fixes: f1e58583b9 ("RISC-V: Support cpu hotplug")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://patch.msgid.link/20260413123515.48423-1-hui.wang@canonical.com
[pjw@kernel.org: cleaned up some of the pr_warn() messages]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Remove the pr_fmt macro as no pr_*() calls exist in this file. The
prefix string "kexec_image: " is also not appropriate for kexec_elf.c,
if pr_fmt is needed in the future, referring to kexec_image.c, a more
appropriate prefix like "kexec_file(elf): " can be added at that time.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://patch.msgid.link/20260525115159.100177-1-hui.wang@canonical.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
RISC-V already satisfies all prerequisites for build-time mcount sorting:
the sorttable host tool handles EM_RISCV in its machine-type dispatch, and
the __mcount_loc section entries are stored as direct virtual addresses in
the final vmlinux binary, so no relocation processing is required during
the sort step.
Select HAVE_BUILDTIME_MCOUNT_SORT so that BUILDTIME_MCOUNT_SORT is
automatically enabled when DYNAMIC_FTRACE is configured. This allows
sorttable to sort the __mcount_loc section at link time, making the
run-time ftrace initialisation path skip the software sort and reducing
kernel startup overhead.
Verified with CONFIG_FTRACE_SORT_STARTUP_TEST=y, which confirms that
the section produced by the build is already in ascending order:
[ 0.000000] ftrace section at ffffffff81015a60 sorted properly
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Tested-by: Guo Ren <guoren@kernel.org>
Link: https://patch.msgid.link/20260409114736.907-1-cp0613@linux.alibaba.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The same Kconfig statement 'depends on RISCV_ISA_V' appears twice for
RISCV_PROBE_VECTOR_UNALIGNED_ACCESS. The first instance is in its choice
menu, "Vector unaligned Accesses Support", making the second instance in
its specific Kconfig definition dead code. I propose removing this second
instance.
This dead code was found by kconfirm, a static analysis tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Jesse Taube <mr.bossman075@gmail.com>
Link: https://patch.msgid.link/20260329203249.563434-1-julianbraha@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
RANDOMIZE_BASE currently selects RELOCATABLE even though RELOCATABLE
is visible to users. Some other architectures, like x86, use 'depends on'
for RELOCATABLE in their definition of RANDOMIZE_BASE, so let's do the same
here.
This select-visible Kconfig misusage was detected by Kconfirm, a static
analysis tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://patch.msgid.link/20260503040331.71875-1-julianbraha@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Both GCC [1] and Clang [2] consider the generic version of _THIS_IP_ to
be broken:
#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
In particular, the address of a label is only expected to be used with a
computed goto.
While the generic version more or less works today, it is known to be
brittle and may break with current and future optimizations. For
example, Clang -O2 always returns 1 when this function is inlined:
static inline unsigned long get_ip(void)
{ return ({ __label__ __here; __here: (unsigned long)&&__here; }); }
Fix it by overriding _THIS_IP_ in <asm/linkage.h> (which is included by
<linux/instruction_pointer.h>) using an architecture-specific inline asm
version. Additionally, avoiding taking the address of a label prevents
compilers from emitting spurious indirect branch targets (e.g. ENDBR or
BTI) under control-flow integrity schemes.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=120071 [1]
Link: https://github.com/llvm/llvm-project/issues/138272 [2]
Signed-off-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260521000436.3931067-1-elver@google.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The module-sections.c file defines a custom cmp_3way() macro to perform
3-way comparisons during relocation sorting.
Instead of maintaining our own implementation, use the generic
cmp_int() macro provided by the already included <linux/sort.h>. This
removes redundant code and relies on standard kernel interfaces.
Signed-off-by: Florian Schmaus <florian.schmaus@codasip.com>
Link: https://patch.msgid.link/20260512063231.708256-1-florian.schmaus@codasip.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The walk_stackframe() function is used to unwind the stack of a given
task. When function graph tracing is enabled, ftrace_graph_ret_addr()
is called to resolve the original return address if it was modified by
the tracer.
The current code incorrectly passes 'current' instead of 'task' to
ftrace_graph_ret_addr(). This causes incorrect return address resolution
when unwinding a stack of a different task (e.g., when the task is
blocked in __switch_to).
Fix this by passing 'task' instead of 'current' to match the behavior
of other architectures (arm64, loongarch, powerpc, s390, x86).
Signed-off-by: Rui Qi <qirui.001@bytedance.com>
Link: https://patch.msgid.link/20260408092915.46408-1-qirui.001@bytedance.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The generic CC_CAN_LINK detection relies on -m32/-m64 compiler flags.
These are not supported by riscv compilers.
Use architecture-specific logic using -mabi instead.
Prefer the 'd' ABI variant when possible as todays toolchains are most
likely to provide a libc for that one.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20260316-cc-can-link-riscv-v4-1-64c072b456dd@linutronix.de
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Standardize the compiler output flag format across all RISC-V
selftests by adding a space between '-o' and '$@'.
Although '-o$@' is perfectly valid for GCC/Clang to parse,
changing it to '-o $@' with a space aligns with the GNU
official documentation conventions, improves readability by
visually separating the flag from the target variable, and
ensures consistency with other architectures.
Currently, RISC-V selftests use '-o$@' (without space) in 13
instances across 6 Makefiles, while all other architectures
consistently use '-o $@' (with space). This inconsistency makes
RISC-V an outlier in the kernel's selftest infrastructure.
Signed-off-by: Zong Li <zong.li@sifive.com>
Link: https://patch.msgid.link/20260511032917.3542802-1-zong.li@sifive.com
[pjw@kernel.org: cleaned up patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Currently, add_resource() returns 1 on success, even though its callers
only check for negative values. Instead, propagate the insert_resource()
result from add_resource() to align with standard kernel return-value
conventions (0 on success, negative errno on failure).
Use %pR to print the full resource range while at it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260512172034.328405-4-thorsten.blum@linux.dev
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Replace sprintf() with sysfs_emit() in cpu_show_ghostwrite(), which is
preferred for formatting sysfs output because it provides safer bounds
checking.
While the current code only emits fixed strings that fit easily within
PAGE_SIZE, use sysfs_emit() to follow secure coding best practices.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260510165420.109453-3-thorsten.blum@linux.dev
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use the return value of strscpy() instead of calling strlen(fdt_cmdline)
again and return early on string truncation. Drop the explicit size
argument since early_cmdline has a fixed length, which strscpy()
determines using sizeof() when the argument is omitted.
Replace strlcat() with strscpy() to append CONFIG_CMDLINE.
Also remove the unnecessary fdt_cmdline NULL initialization.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260504154924.141566-3-thorsten.blum@linux.dev
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Replace the unbounded sprintf("%s", ...) with the faster and safer
strscpy(). Replace all other sprintf() calls with the safer snprintf().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260127110543.436242-1-thorsten.blum@linux.dev
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add arch/riscv/include/asm/purgatory.h and provide the purgatory()
prototype via the architecture header, mirroring the x86 layout.
Remove the workaround from arch/riscv/purgatory/purgatory.c.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260509073850.44595-4-thorsten.blum@linux.dev
[pjw@kernel.org: drop superfluous extern in header file]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Change the function's return type from int to bool and return the result
of memcmp() directly to simplify the code. While at it, cast ->start to
'const u8 *' to better match the expected type.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260509073850.44595-3-thorsten.blum@linux.dev
Signed-off-by: Paul Walmsley <pjw@kernel.org>
prctl(PR_SET_CFI,PR_CFI_BRANCH_LANDING_PADS) silently ignored
unknown control values. Only PR_CFI_{ENABLE,DISABLE,LOCK} should
be permitted.
This changes the behavior of the uABI (fails previously accepted bits
with EINVAL).
Fixes: 08ee155905 ("prctl: cfi: change the branch landing pad prctl()s to be more descriptive")
Signed-off-by: Richard Patel <ripatel@wii.dev>
Link: https://patch.msgid.link/20260518183918.322545-1-ripatel@wii.dev
[pjw@kernel.org: change the patch description to note that although this is a uABI change, it does not break the uABI]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The static key fast_unaligned_access_speed_key is supposed to be
initialized after check_unaligned_access_all_cpus() has been completed.
However, check_unaligned_access_all_cpus() has been moved to late_initcall
while setting fast_unaligned_access_speed_key still happens at
arch_initcall_sync, thus the static key does not get properly initialized.
fast_unaligned_access_speed_key can still be initialized in CPU hotplug
events, but that cannot be relied on.
Move fast_unaligned_access_speed_key's initialization into
check_unaligned_access_all_cpus() to fix this issue. This also prevent
someone from moving one initcall while forgetting the other in the future.
Fixes: 6455c6c118 ("riscv: Clean up & optimize unaligned scalar access probe")
Reported-by: Michael Neuling <mikey@neuling.org>
Closes: https://lore.kernel.org/linux-riscv/CAEjGV6y0=bSLp_wrS0uHFj1S2TCRtz4GKzaU5O-L1VV-EL7Nnw@mail.gmail.com/
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://patch.msgid.link/20260407120639.4006031-1-namcao@linutronix.de
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Fixes a warning while dumping core:
[54983.546369][ C7] WARNING: [!note_name] fs/binfmt_elf.c:1771 at elf_core_dump+0x910/0xf68, CPU#7: abort01/31982
Fixes: 2af7c9cf02 ("riscv/ptrace: expose riscv CFI status and state via ptrace and in core files")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://patch.msgid.link/87y0hcxuh5.fsf@igel.home
Signed-off-by: Paul Walmsley <pjw@kernel.org>
- Add more functions to the remote allowed list
randconfig found more functions that are allowed for the remote code for
s390 and arm. Add them to the allowed list.
- Fix remote_test error path
If one of the simple ring buffers fails to load, the code is supposed to
rollback its initialized buffers. Instead of rolling back the buffers for
the failed load, it uses the global variable and rolls back all the
successfully loaded buffers.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCagm9FRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn0xAP0WSYmbUAGYnrq1o5L4EEM61ManFBfp
ta7dmx1Q5SYw6AEAtqbiH42VJZviAmajguyuL0cs9i9exFl+j4SaneejNwg=
=CLqK
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add more functions to the remote allowed list
randconfig found more functions that are allowed for the remote code
for s390 and arm. Add them to the allowed list.
- Fix remote_test error path
If one of the simple ring buffers fails to load, the code is supposed
to rollback its initialized buffers. Instead of rolling back the
buffers for the failed load, it uses the global variable and rolls
back all the successfully loaded buffers.
* tag 'trace-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix desc in error path for the trace remote test module
ring-buffer remote: Avoid unexpected symbol warnings (arm, s390)
When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST),
get_ext_report() allocates a buffer to retrieve a certificate blob from the
host, keeping track of its size in report_req->certs_len.
However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating
an invalid buffer size, as well as the expected length of such buffer.
get_ext_report() subsequently updates report_req->certs_len with the
host-controlled value, and cleans up the buffer by computing a page order
from such value. This is incorrect, as the host-provided length may not
match the page order of the original allocation, potentially resulting
in corruption in the page allocator.
Fix this by using alloc_pages_exact() instead, and reusing @npages to
compute the size passed to free_pages_exact(). For consistency, also
use @npages to compute the size when allocating the pages, even though
this last change has no functional effect.
Fixes: 3e385c0d6c ("virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Roth <michael.roth@amd.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix use-after-free in irq_work_single() on PREEMPT_RT
(Jiayuan Chen)
- Don't call add_interrupt_randomness() for NMIs
in handle_percpu_devid_irq() (Mark Rutland)
- Remove unused function in the ath79-cpu irqchip driver
causing LKP CI build warnings (Rosen Penev)
- Fix IRQ allocation/teardown leakage regressions in the GICv5
irqchip driver (Sascha Bischoff)
- Fix an IRQ trigger type regression in the Meson S4 SoC irqchip
driver (Xianwei Zhao)
- Fix CPU offlining regression in the RiscV IMSIC irqchip driver
(Yong-Xuan Wang)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rLcN
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ fixes from Ingo Molnar:
- Fix use-after-free in irq_work_single() on PREEMPT_RT (Jiayuan Chen)
- Don't call add_interrupt_randomness() for NMIs in
handle_percpu_devid_irq() (Mark Rutland)
- Remove unused function in the ath79-cpu irqchip driver causing LKP
CI build warnings (Rosen Penev)
- Fix IRQ allocation/teardown leakage regressions in the GICv5 irqchip
driver (Sascha Bischoff)
- Fix an IRQ trigger type regression in the Meson S4 SoC irqchip driver
(Xianwei Zhao)
- Fix CPU offlining regression in the RiscV IMSIC irqchip driver
(Yong-Xuan Wang)
* tag 'irq-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
irqchip/riscv-imsic: Clear interrupt move state during CPU offlining
irqchip/meson-gpio: Use the correct register in meson_s4_gpio_irq_set_type()
irqchip/ath79-cpu: Remove unused function
genirq/chip: Don't call add_interrupt_randomness() for NMIs
irqchip/gic-v5: Allocate ITS parent LPIs as a range
irqchip/gic-v5: Support range allocation for LPIs
irqchip/gic-v5: Move LPI allocation into the LPI domain
- Disable satp register probing when no5lvl is specified on the kernel
command line
- Fix a CFI-related issue with the misaligned access speed measurement
code
- Reduce the CFI shadow stack size limit from 4GB to 2GB (following
ARM64 GCS)
- Prevent the kernel from requesting delegation of misaligned access
faults unless a new Kconfig option,
CONFIG_RISCV_SBI_FWFT_DELEGATE_MISALIGNED, is enabled. This will
depend on CONFIG_NONPORTABLE until the deficiencies of the kernel
misaligned access fixup code are fixed
- Fix some potential uninitialized memory accesses in error paths in
compat_riscv_gpr_set() and compat_restore_sigcontext()
- Fix a bug in the RISC-V MIPS vendor errata patching code where a
logical-and was used in place of a bitwise-and
- Drop some unnecessary code in riscv_fill_hwcap_from_isa_string()
- Use macros for isa2hwcap indices in riscv_fill_hwcap(), rather than
open-coding them
- Fix some documentation typos (one affecting "make htmldocs")
-----BEGIN PGP SIGNATURE-----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=yOtI
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Relatively low-impact fixes. Probably the most notable one is that we
no longer ask the monitor-mode firmware to delegate misaligned access
handling to the kernel by default, since the kernel code needs
significant improvement to match the functionality of the firmware.
This change avoids functional problems at some cost in performance,
but shouldn't affect any system with misaligned access handling in
hardware.
- Disable satp register probing when no5lvl is specified on the
kernel command line
- Fix a CFI-related issue with the misaligned access speed
measurement code
- Reduce the CFI shadow stack size limit from 4GB to 2GB (following
ARM64 GCS)
- Prevent the kernel from requesting delegation of misaligned access
faults unless a new Kconfig option, RISCV_SBI_FWFT_DELEGATE_MISALIGNED,
is enabled. This will depend on CONFIG_NONPORTABLE until the
deficiencies of the kernel misaligned access fixup code are fixed
- Fix some potential uninitialized memory accesses in error paths in
compat_riscv_gpr_set() and compat_restore_sigcontext()
- Fix a bug in the RISC-V MIPS vendor errata patching code where a
logical-and was used in place of a bitwise-and
- Drop some unnecessary code in riscv_fill_hwcap_from_isa_string()
- Use macros for isa2hwcap indices in riscv_fill_hwcap(), rather than
open-coding them
- Fix some documentation typos (one affecting 'make htmldocs')"
* tag 'riscv-for-linus-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: misaligned: Make enabling delegation depend on NONPORTABLE
riscv: Docs: fix unmatched quote warning
riscv: cfi: reduce shadow stack size limit from 4GB to 2GB
riscv: cpufeature: Use pre-defined ISA ext macros to index isa2hwcap
riscv: mm: Fixup no5lvl failure when vaddr is invalid
riscv: Fix register corruption from uninitialized cregs on error
riscv: errata: Fix bitwise vs logical AND in MIPS errata patching
Documentation: riscv: cmodx: fix typos
riscv: cpufeature: Drop this_hwcap clear in T-Head vector workaround
riscv: Define __riscv_copy_{,vec_}{words,bytes}_unaligned() using SYM_TYPED_FUNC_START
During initialisation in remote_test_load(), if one of the
simple_ring_buffer fails to initialise, the error path attempts to
rollback initialised buffers. However, the rollback incorrectly uses the
global pointer to the trace descriptor, which is only set upon
successful load completion. Fix the error path by using the local
pointer to the descriptor.
Link: https://patch.msgid.link/20260515201616.337469-1-vdonnefort@google.com
Fixes: ea908a2b79 ("tracing: Add a trace remote module for testing")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
base-commit: 5d6919055d
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Sashiko reports:
lm90_alert() executes in the smbus alert context and calls
lm90_update_confreg() to disable the hardware alert line, without
acquiring hwmon_lock.
Concurrently, sysfs write operations (such as lm90_write_convrate) hold
the hwmon_lock, temporarily modify data->config, and then restore it.
If an alert interrupt occurs concurrently with a sysfs write, the sysfs
path will overwrite the alert handler's modifications to data->config
and the hardware register.
This unintentionally re-enables the hardware alert line while the alarm is
still active, causing an interrupt storm.
Add the missing lock to lm90_alert() to solve the problem.
Fixes: 7a1d220ccb ("hwmon: (lm90) Introduce function to update configuration register")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
In lm90_probe(), the devm action to cancel the alert_work and report_work
(lm90_restore_conf) is registered in lm90_init_client() before
devm_hwmon_device_register_with_info() is called.
Because devm executes cleanup actions in reverse order during module
unbind or probe failure, the hwmon device is unregistered and freed first.
If lm90_alert_work() or lm90_report_alarms() runs in the window between
the hwmon device being freed and the delayed works being cancelled,
lm90_update_alarms() will dereference the freed data->hwmon_dev here.
Fix the problem by canceling the workers separately after registering
the hwmon device and before registering the interrupt handler. This ensures
that the workers are canceled after interrupts are disabled and before
the hwmon device is released. Add "shutdown" flag to indicate that device
shutdown is in progress to prevent workers from being re-armed.
Fixes: f6d0775119 ("hwmon: (lm90) Rework alarm/status handling")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
core:
- fix for the fix for the handle change race.
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
amdgpu:
- Userq fixes
- DCN 3.2 fix
- RAS fix
- GC 12 fix
gma500:
- oaktrail_lvds: fix i2c handling
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly
-----BEGIN PGP SIGNATURE-----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=eHJD
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes pull, small and all over fixes, mostly xe and amdgpu,
with some ttm and a core fix for the handle change pain.
core:
- fix for the fix for the handle change race
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
amdgpu:
- Userq fixes
- DCN 3.2 fix
- RAS fix
- GC 12 fix
gma500:
- oaktrail_lvds: fix i2c handling
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly"
* tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm: Replace old pointer to new idr
drm/loongson: Use managed KMS polling
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
drm/ttm: Convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
drm/gma500/oaktrail_lvds: fix i2c adapter leaks on init
drm/gma500/oaktrail_lvds: fix hang on init failure
drm/gma500/oaktrail_hdmi: fix i2c adapter leak on setup
drm/xe: Drop unused ggtt_balloon field
accel/qaic: Add overflow check to remap_pfn_range during mmap
drm/i915/dp: Fix VSC dynamic range signaling for RGB formats
drm/i915: skip __i915_request_skip() for already signaled requests
drm/bridge: imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
drm/amdgpu/gfx_v12_0: set gfx.rs64_enable from PFP header on GFX12
drm/amd/ras: Fix CPER ring debugfs read overflow
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
drm/amdgpu: fix userq hang detection and reset
drm/amdgpu: remove almost all calls to amdgpu_userq_detect_and_reset_queues
drm/amdgpu: rework amdgpu_userq_signal_ioctl v3
drm/amdgpu: remove deadlocks from amdgpu_userq_pre_reset
drm/xe/dma-buf: fix UAF with retry loop
...
Commit 5e28b7b944 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
[1]
!RB_EMPTY_ROOT(&prime_fpriv->dmabufs)
WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833
Call Trace:
drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438
Fixes: 5e28b7b944 ("drm: Set old handle to NULL before prime swap in change_handle")
Reported-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7c9eed171647e421013
Cc: stable@vger.kernel.org
Tested-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/tencent_C267296443AAA4567771176886DFF364A305@qq.com
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
-----BEGIN PGP SIGNATURE-----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=mkSZ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 MPAM fixes from Catalin Marinas:
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: Check whether the config array is allocated before destroying it
arm_mpam: Fix false positive assert failure during mpam_disable()
arm_mpam: Improve check for whether or not NRDY is hardware managed
arm_mpam: Pretend that NRDY is always hardware managed
arm_mpam: Fix monitor instance selection when checking for hardware NRDY
