mirror of
https://github.com/torvalds/linux.git
synced 2026-07-27 17:47:41 +02:00
e054c1a6ae
1461860 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Pauli Virtanen
|
e054c1a6ae |
Bluetooth: ISO: fix malformed ISO_END/CONT handling
Core specification (Part C vol 4 sec 5.4.5) does not exclude empty
ISO_CONT, ISO_END packets. We currently reject them if they are last.
If controller sends malformed sequence
ISO_START -> rx_len = 4, ISO_CONT skb->len 4, ISO_START
that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends
too long ISO_END, we panic on skb_put. If controller sends too short
ISO_END we accept it.
Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check
skb->len properly before skb_put. Combine the ISO_CONT/END code paths
as they require the same initial checks. Reject too short ISO_END
packets.
Fixes:
|
||
|
Kiran K
|
9c36951474 |
Bluetooth: btintel_pcie: Refactor FLR to use device_reprobe()
The FLR branch in btintel_pcie_reset_work() open-coded the entire
re-init sequence: btintel_pcie_release_hdev() (hci_unregister_dev +
hci_free_dev), pci_try_reset_function(), enable_interrupts /
config_msix / enable_bt / reset_ia / start_rx, then
btintel_pcie_setup_hdev() (hci_alloc_dev_priv + hci_register_dev).
Every probe() init step had to be kept in sync with this second
copy in the reset path, and any failure mid-sequence left state to
unwind by hand.
The PLDR path already delegates teardown and re-init to the PCI
core via device_reprobe(): .remove() destroys data through devres
and unregisters hdev, then .probe() rebuilds everything from
scratch. Apply the same model to FLR.
Introduce btintel_pcie_perform_flr() mirroring perform_pldr(). It
runs pci_try_reset_function() (required to avoid the device_lock
ABBA against btintel_pcie_remove(), which calls
disable_work_sync(&reset_work) while holding device_lock) followed
by device_reprobe(). On success, data is destroyed and a fresh
probe re-INIT_WORKs coredump_work with disable count 0, so
enable_work() must not be called; on failure, data is still alive
and the caller balances the earlier disable_work_sync(). The
contract is documented on the helper and reiterated at the
reset_work() call site.
reset_work() shrinks to interrupt/worker drain, dispatch on
reset_type, and the single asymmetry between the two paths. The
out_enable label, the manual unregister/register pair, and the
forward declaration of btintel_pcie_setup_hdev() are dropped.
No intended functional change; FLR and PLDR now share one
teardown contract.
Fixes:
|
||
|
Siwei Zhang
|
6fef032af0 |
Bluetooth: L2CAP: Fix use-after-free in l2cap_sock_new_connection_cb()
l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after
release_sock(parent). Once the parent lock is dropped the newly
enqueued child socket sk is reachable via the accept queue, so another
task can accept and free it before the callback dereferences sk,
resulting in a use-after-free.
Rework the ->new_connection() op so the core, rather than the callback,
owns the child channel's lifetime. The op now receives a pre-allocated
new_chan and returns an errno instead of allocating and returning a
channel. l2cap_new_connection() allocates the child channel and links
it into the conn list via __l2cap_chan_add() before invoking the
callback, so the conn-list reference keeps the channel alive once
release_sock(parent) exposes the socket to other tasks.
Channel configuration that was duplicated in l2cap_sock_init() and the
various new_connection callbacks is consolidated into
l2cap_chan_set_defaults(), which now inherits from the parent channel
when one is supplied.
Fixes:
|
||
|
Yousef Alhouseen
|
4bd0b27405 |
Bluetooth: fix UAF in bt_accept_dequeue()
bt_accept_get() takes a temporary reference before dropping the accept
queue lock. bt_accept_dequeue() currently drops that reference before
bt_accept_unlink(), leaving only the queue reference.
bt_accept_unlink() drops the queue reference. The subsequent
sock_hold() therefore accesses freed memory if it was the final
reference, as observed by KASAN during listening L2CAP socket cleanup.
Retain the temporary queue-walk reference through unlink and hand it to
the caller on success. Drop it explicitly on the closed and
not-yet-connected paths.
Fixes:
|
||
|
Yousef Alhouseen
|
bb067a99a0 |
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference.
Fixes:
|
||
|
Sungwoo Kim
|
0f8a5dcc66 |
Bluetooth: sco: Fix a race condition in sco_sock_timeout()
sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket
is closing while the timer is running, it holds the same lock
(lock_sock(sk)) twice, leading to a deadlock.
CPU 0 CPU 1
==================== ======================
sco_sock_close()
sco_sock_timeout()
lock_sock(sk) // <-- LOCK
__sco_sock_close()
sco_chan_del()
sco_conn_put()
sco_conn_free()
disable_delayed_work_sync()
lock(sk) // <-- SAME LOCK
Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk),
ensuring that no lock_sock(sk) is held before sco_sock_timeout().
Lockdep splat:
WARNING: possible circular locking dependency detected
6.13.0-rc4 #7 Not tainted
syz-executor292/9514 is trying to acquire lock:
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
but task is already holding lock:
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622
lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158
process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310
worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391
kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389
ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244
-> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}:
check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline]
check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904
__lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline]
start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline]
__flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
__cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline]
disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514
sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline]
kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline]
sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107
sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236
sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526
sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/bluetooth/sco.c:1300
__sock_release+0xe1/0x2d0 sect/v6.13-rc4/net/socket.c:640
sock_close+0x1c/0x30 sect/v6.13-rc4/net/socket.c:1408
__fput+0x2bd/0xa80 sect/v6.13-rc4/fs/file_table.c:450
__fput_sync+0x15e/0x1c0 sect/v6.13-rc4/fs/file_table.c:535
__do_sys_close sect/v6.13-rc4/fs/open.c:1554 [inline]
__se_sys_close sect/v6.13-rc4/fs/open.c:1539 [inline]
__x64_sys_close+0x93/0x120 sect/v6.13-rc4/fs/open.c:1539
do_syscall_x64 sect/v6.13-rc4/arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xee/0x210 sect/v6.13-rc4/arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes:
|
||
|
Cen Zhang
|
384a4b2fef |
Bluetooth: MGMT: Fix adv monitor add failure cleanup
hci_add_adv_monitor() publishes a new adv_monitor in
hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT
offload add path can then fail either locally before the controller add
command completes, or in the MSFT add callback. In the current queued
management add flow, hci_cmd_sync_work() still invokes
mgmt_add_adv_patterns_monitor_complete() with the original pending command
after msft_add_monitor_pattern() returns.
The buggy scenario involves two paths, with each column showing the order
within that path:
MSFT add handling MGMT completion
1. insert monitor and handle 1. receive sync error
2. send MSFT add command 2. call add-monitor completion
3. callback sees bad response 3. load cmd->user_data
4. callback frees monitor 4. read monitor->handle
Local MSFT setup failures have the other half of the same ownership bug:
they return an error after the IDR insertion, but no later code removes the
failed monitor from the IDR.
Keep ownership with the pending management command until its completion.
For normal management adds, the MSFT add callback now records successful
controller state and returns errors to its caller. The management
completion frees the monitor on non-success after copying the response
handle, while resume/reregister callback-error cleanup remains in the
MSFT callback. The success path keeps the existing bookkeeping.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x19f/0x330
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
kasan_report+0xe0/0x110
? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
? 0xffffffffc00d00da
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
? hci_cmd_sync_work+0x1ab/0x210 [bluetooth]
hci_cmd_sync_work+0x1c0/0x210 [bluetooth]
? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth]
process_one_work+0x4fd/0xbc0
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth]
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 471 on cpu 3 at 285.205389s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
__sys_sendto+0x2bc/0x2d0
__x64_sys_sendto+0x76/0x90
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 454 on cpu 2 at 285.217112s:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
msft_add_monitor_sync+0x54a/0x570 [bluetooth]
hci_add_adv_monitor+0x133/0x180 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Fixes:
|
||
|
Cen Zhang
|
518aa9505f |
Bluetooth: 6lowpan: hold L2CAP conn across debugfs control
get_l2cap_conn() looks up an LE hci_conn under hdev protection, but
then drops that protection before reading hcon->l2cap_data and before
lowpan_control_write() later dereferences conn->hcon. A disconnect or
device close can tear down the same L2CAP connection in that window.
The buggy scenario involves two paths, with each column showing the order
within that path:
6LoWPAN control write: HCI disconnect/device close:
1. get_l2cap_conn() finds hcon 1. hci_disconn_cfm() dispatches
and hcon->l2cap_data. the L2CAP disconnect callback.
2. get_l2cap_conn() drops hdev 2. l2cap_conn_del() clears
protection and returns conn. hcon->l2cap_data and drops the
L2CAP connection reference.
3. lowpan_control_write() reads 3. hci_conn_del() removes and drops
conn->hcon. the HCI connection.
Take a reference to the L2CAP connection with
l2cap_conn_hold_unless_zero() while hdev is still locked, and drop that
reference after the debugfs command's last use of conn. This mirrors the
existing L2CAP ACL receive-side handoff and keeps the connection
dereferenceable after leaving hdev protection. Export the existing helper
so the bluetooth_6lowpan module can use the same lifetime primitive.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in lowpan_control_write+0x374/0x520
The buggy address belongs to the object at ffff888111b9d000 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 0 bytes inside of freed 1024-byte region
[ffff888111b9d000, ffff888111b9d400)
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
lowpan_control_write+0x374/0x520 (net/bluetooth/6lowpan.c:1131)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__debugfs_file_get+0xf7/0x400
full_proxy_write+0x9e/0xd0
vfs_write+0x1b0/0x810
ksys_write+0xd2/0x170
dnotify_flush+0x32/0x220
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
__kasan_kmalloc+0xaa/0xb0
l2cap_conn_add+0x45/0x520
l2cap_chan_connect+0xac6/0xd90
l2cap_sock_connect+0x216/0x350
__sys_connect+0x101/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
hci_conn_hash_flush+0xc0/0x140
hci_dev_close_sync+0x41a/0xb00
hci_dev_close+0x12f/0x160
hci_sock_ioctl+0x157/0x570
sock_do_ioctl+0xf7/0x210
sock_ioctl+0x32f/0x490
__x64_sys_ioctl+0xc7/0x110
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
kasan_record_aux_stack+0xa7/0xc0
insert_work+0x32/0x100
__queue_work+0x262/0xa60
queue_work_on+0xad/0xb0
l2cap_connect_cfm+0x4ef/0x670
hci_le_remote_feat_complete_evt+0x247/0x430
hci_event_packet+0x360/0x6f0
hci_rx_work+0x2ae/0x7a0
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Fixes:
|
||
|
Cen Zhang
|
352a59dc1f |
Bluetooth: 6lowpan: avoid untracked enable work
lowpan_enable_set() allocates a temporary work item and schedules
do_enable_set() on system_wq, then returns to debugfs. The debugfs active
operation has ended at that point, but the worker still executes module
text and manipulates enable_6lowpan and listen_chan.
bt_6lowpan_exit() removes the debugfs files and immediately closes and
puts listen_chan. It has no pointer to the queued work item, so it cannot
cancel or flush it before tearing down the state that the worker uses.
The buggy scenario involves two paths, with each column showing the order
within that path:
debugfs enable write module exit
1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes
set_enable work the debugfs file
2. schedule_work() queues 2. bt_6lowpan_exit() closes
do_enable_set() and puts listen_chan
3. the write operation returns 3. module teardown can continue
4. do_enable_set() later runs
against stale state
Run the enable state transition synchronously in lowpan_enable_set()
instead. The simple debugfs setter can sleep, and this file already handles
the 6LoWPAN control write synchronously under the same set_lock. Once the
setter returns, debugfs removal covers the whole operation and exit can no
longer race with an untracked work item.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0
Workqueue: events do_enable_set [bluetooth_6lowpan]
The buggy address belongs to the object at ffff888109cb8000
Fixes:
|
||
|
Siwei Zhang
|
12917f591c |
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The create command
is in exactly one of two states: still queued, or in flight. The cancel
function holds cmd_sync_work_lock across the whole decision: the worker
takes this lock to dequeue every entry, so while it is held a queued
command cannot start running and an in-flight command cannot complete
and let the next command become pending. This keeps the flag test and
hci_cmd_sync_cancel() atomic with respect to the worker, so a queued
command is simply dequeued, and an in-flight command owned by this
connection is cancelled without the risk of cancelling an unrelated
command that became pending in the meantime. CIS uses the same flag
mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.
hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear
HCI_CONN_CREATE after the create command completes, but the command
status handler can free conn via hci_conn_del() (for example when the
controller rejects the connection) while the worker is still blocked on
the connection complete event. Hold a reference on conn across the
create command so the flag can be cleared without a use-after-free.
Fixes:
|
||
|
Maoyi Xie
|
badff6c3be |
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent.
Fixes:
|
||
|
Muhammad Bilal
|
687617555c |
Bluetooth: L2CAP: validate option length before reading conf opt value
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds read has already executed.
An existing post-hoc length check keeps the garbage value from being
consumed, so this is not a data leak in the current control flow. It
is still a validate-after-use ordering bug: up to 4 bytes are read
past the end of the buffer before it is known to contain them, and it
is fragile to future changes in the callers.
Fix it at the source. Pass the end of the buffer into
l2cap_get_conf_opt() and refuse to touch opt->val unless the full
option (header + value) fits. Each caller computes an end pointer
once before the loop and checks the return value directly instead of
inferring the error from a negative length.
Fixes:
|
||
|
Runyu Xiao
|
2641a9e0a1 |
Bluetooth: L2CAP: cancel pending_rx_work before taking conn->lock
l2cap_conn_del() takes conn->lock and then calls cancel_work_sync() for
pending_rx_work. process_pending_rx() takes the same mutex, so teardown
can deadlock against the worker it is flushing.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the l2cap_conn_ready() -> queue_work(...,
&conn->pending_rx_work) submit path, the l2cap_conn_del() ->
cancel_work_sync(&conn->pending_rx_work) teardown path, and the
process_pending_rx() -> mutex_lock(&conn->lock) worker edge. Lockdep
reported:
WARNING: possible circular locking dependency detected
process_pending_rx+0x21/0x2a [vuln_msv]
l2cap_conn_del.constprop.0+0x3f/0x4e [vuln_msv]
*** DEADLOCK ***
Cancel pending_rx_work before taking conn->lock, matching the existing
lock-before-drain ordering used for the two delayed works in the same
teardown path. The pending_rx queue is still purged after the work has
been cancelled and conn->lock has been acquired.
Fixes:
|
||
|
Muhammad Bilal
|
d5541eb148 |
Bluetooth: ISO: avoid NULL deref of conn in iso_conn_big_sync()
iso_conn_big_sync() drops the socket lock to call hci_get_route() and
then re-acquires it, but dereferences iso_pi(sk)->conn->hcon afterwards
without re-checking that conn is still valid.
While the lock is dropped, the connection can be torn down under the
same socket lock: iso_disconn_cfm() -> iso_conn_del() -> iso_chan_del()
sets iso_pi(sk)->conn to NULL (and the broadcast teardown path can also
clear conn->hcon on its own). When iso_conn_big_sync() re-acquires the
lock and reads conn->hcon, conn may be NULL, causing a NULL pointer
dereference (hcon is the first member of struct iso_conn).
This path is reached from iso_sock_recvmsg() for a PA-sync broadcast
sink socket (BT_SK_DEFER_SETUP | BT_SK_PA_SYNC), so the dropped-lock
window can race with connection teardown driven by controller events.
Re-validate iso_pi(sk)->conn and its hcon after re-acquiring the socket
lock and bail out if the connection went away, as already done in the
sibling iso_sock_rebind_bc().
Fixes:
|
||
|
Samuel Page
|
fa85d985f6 |
Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete
add_device_complete() runs from the hci_cmd_sync_work kworker, which
holds only hci_req_sync_lock and *not* hci_dev_lock. It calls
hci_conn_params_lookup() and then dereferences the returned object
(params->flags) without taking hci_dev_lock:
params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr,
le_addr_type(cp->addr.type));
...
device_flags_changed(NULL, hdev, &cp->addr.bdaddr,
cp->addr.type, hdev->conn_flags,
params ? params->flags : 0);
hci_conn_params_lookup() walks hdev->le_conn_params and is documented to
require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE
(remove_device()), which does run under hci_dev_lock, can call
hci_conn_params_free() to list_del() and kfree() the very object the
lookup returned, so the subsequent params->flags read touches freed
memory [0].
Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of
params->flags (and the matching event emission) so the lookup result
cannot be freed by a concurrent remove_device() before it is used,
honouring the locking contract of hci_conn_params_lookup().
[0]: (trailing page/memory-state dump trimmed)
BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671
Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388
CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPT
Hardware name: linux,dummy-virt (DT)
Workqueue: hci0 hci_cmd_sync_work
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C)
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x118/0x5d8 mm/kasan/report.c:482
kasan_report+0xb0/0xf4 mm/kasan/report.c:595
__asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378
add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671
hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334
process_one_work+0x628/0xd38 kernel/workqueue.c:3289
process_scheduled_works kernel/workqueue.c:3372 [inline]
worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453
kthread+0x39c/0x444 kernel/kthread.c:436
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Allocated by task 3401:
kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57
kasan_save_track+0x20/0x3c mm/kasan/common.c:78
kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385
kmalloc_noprof include/linux/slab.h:950 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279
hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline]
add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755
hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline]
hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xe0/0x128 net/socket.c:742
sock_write_iter+0x250/0x390 net/socket.c:1195
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x66c/0xab0 fs/read_write.c:688
ksys_write+0x1fc/0x24c fs/read_write.c:740
__do_sys_write fs/read_write.c:751 [inline]
__se_sys_write fs/read_write.c:748 [inline]
__arm64_sys_write+0x70/0xa4 fs/read_write.c:748
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49
el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151
el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724
el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596
Freed by task 3740:
kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57
kasan_save_track+0x20/0x3c mm/kasan/common.c:78
kasan_save_free_info+0x4c/0x74 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x88/0xb8 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2685 [inline]
slab_free mm/slub.c:6170 [inline]
kfree+0x14c/0x458 mm/slub.c:6488
hci_conn_params_free+0x288/0x484 net/bluetooth/hci_core.c:2312
remove_device+0x4b0/0x968 net/bluetooth/mgmt.c:7919
hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline]
hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xe0/0x128 net/socket.c:742
sock_write_iter+0x250/0x390 net/socket.c:1195
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x66c/0xab0 fs/read_write.c:688
ksys_write+0x1fc/0x24c fs/read_write.c:740
__do_sys_write fs/read_write.c:751 [inline]
__se_sys_write fs/read_write.c:748 [inline]
__arm64_sys_write+0x70/0xa4 fs/read_write.c:748
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49
el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151
el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724
el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596
Fixes:
|
||
|
Luiz Augusto von Dentz
|
d38eaf6118 |
Bluetooth: 6lowpan: Fix using chan->conn as indication to no remote netdev
|
||
|
Pauli Virtanen
|
1b0d946d6f |
Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled
HCI_UART_SENDING bit in tx_state means write_work is pending and blocks
queueing it again. Currently this bit is not cleared when canceling the
work in hci_uart_close(), which blocks future writes when device is
reopened later if write_work was pending.
Fix by clearing HCI_UART_SENDING when canceling the work.
Also make clearing of tx_skb safe by using disable_work_sync +
enable_work instead of just cancel_work_sync. hci_uart_flush() purges
the proto tx queue so we can cancel the pending write_work there,
instead of doing it just in hci_uart_close(). Re-enable and possibly
requeue the work after queue flush.
Fixes:
|
||
|
Eric Dumazet
|
9e05e91a9a |
amt: fix size calculation in amt_get_size()
amt_get_size() incorrectly used sizeof(struct iphdr) for the sizes of
IFLA_AMT_DISCOVERY_IP, IFLA_AMT_REMOTE_IP, and IFLA_AMT_LOCAL_IP.
These attributes contain IPv4 addresses (__be32), not full IP headers.
Replace sizeof(struct iphdr) with sizeof(__be32) to avoid over-allocating
netlink message space.
Fixes:
|
||
|
Xiang Mei
|
9d160b35cc |
net/smc: fix UAF in smc_cdc_rx_handler() by pinning the socket
smc_cdc_rx_handler() looks up the connection by token under the link
group's conns_lock, drops the lock, and then dereferences conn and the
smc_sock derived from it, ending in sock_hold(&smc->sk) inside
smc_cdc_msg_recv(). No reference is held across the lock release.
The only reference pinning the socket while the connection is
discoverable in the link group is taken in smc_lgr_register_conn()
(sock_hold) and dropped in __smc_lgr_unregister_conn() (sock_put), both
under conns_lock. Once the handler drops conns_lock, a concurrent
close() -> smc_release() -> smc_conn_free() -> smc_lgr_unregister_conn()
can drop that reference and free the smc_sock, so the handler's later
sock_hold() runs on freed memory:
WARNING: lib/refcount.c:25 at refcount_warn_saturate
Workqueue: rxe_wq do_work
refcount_warn_saturate (lib/refcount.c:25)
smc_cdc_msg_recv (net/smc/smc_cdc.c:430)
smc_cdc_rx_handler (net/smc/smc_cdc.c:502)
smc_wr_rx_tasklet_fn (net/smc/smc_wr.c:445)
tasklet_action_common (kernel/softirq.c:938)
handle_softirqs (kernel/softirq.c:622)
Kernel panic - not syncing: panic_on_warn set
Only SMC-R is affected. The SMC-D receive tasklet is stopped by
tasklet_kill(&conn->rx_tsklet) in smc_conn_free() before the connection
is unregistered, so it cannot run concurrently with the free.
Take the socket reference while still holding conns_lock, so the
registration reference can no longer be the last one, and drop it once
the handler is done.
Fixes:
|
||
|
Jamal Hadi Salim
|
8b519cbcab |
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity.
Fixes:
|
||
|
Xiang Mei
|
f0f1887a9e |
net: qualcomm: rmnet: validate MAP frame length before ingress parsing
When ingress deaggregation is disabled, rmnet_map_ingress_handler() passes
the skb straight to __rmnet_map_ingress_handler(), skipping the length
validation that rmnet_map_deaggregate() performs on the aggregated path.
The parser then dereferences the MAP header and csum header/trailer based on
the on-wire pkt_len without checking skb->len, so a short frame is read out
of bounds:
BUG: KASAN: slab-out-of-bounds in rmnet_map_checksum_downlink_packet
Read of size 1 at addr ffff88801118ed00 by task exploit/147
Call Trace:
...
rmnet_map_checksum_downlink_packet (drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:413)
__rmnet_map_ingress_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:96)
rmnet_rx_handler (drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c:129)
__netif_receive_skb_core.constprop.0 (net/core/dev.c:6089)
netif_receive_skb (net/core/dev.c:6460)
tun_get_user (drivers/net/tun.c:1955)
tun_chr_write_iter (drivers/net/tun.c:2001)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Factor that validation out of rmnet_map_deaggregate() into
rmnet_map_validate_packet_len() and run it on the no-aggregation path too.
The MAP header is bounds-checked first, since this path can receive a frame
shorter than the header.
Fixes:
|
||
|
Paolo Abeni
|
b65a794f50 |
netfilter pull request nf-26-07-03
-----BEGIN PGP SIGNATURE----- iQJdBAABCABHFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmpHsDkbFIAAAAAABAAO bWFudTIsMi41KzEuMTIsMiwyDRxmd0BzdHJsZW4uZGUACgkQcJGo2a1f9gCt9w/+ Ps5fmwtUyyGhXzk51eqqikI/Xl6ZdHqiwow4UeY+0pJx6cWskF8qkb6H+n3j63XA piEI14aCeYks1qRi9Za/Wjx+sP00c3KgOMGrwbVLoLtzY6tsXJ/H1KQTKZjQp72K R9lE0NnJdK82gxT304p8RZSDM1xmcVVsmJQVJtp46OOrT8W4T/hHo/JficJoDXdX Vigu9vB5NPOYCxso7BEHczw0SCJyF9XB7vaPdfjkqxVAeIvDn9tzWDIxJM5V50ky sM5yckgObkjycl6hJvT2ZWlnbtD5Cm61otQao1SRt3f4IvtSVxhQLNroJzPCUYBv F2edKWf/Wop/OpVJsCm8DWC/pLphmqdU0iyZfCKk19BqND7rulBJniF3/EeyhgKN ZMHlBzgVmDA6fW2CT+IXzderCAmcK7Rxt7aduy0P/So0pYwL5fs/r+V57xN/kbFP dSMz9pzFef8YxTy3JFGYyrf9WlmPOwlVV5clA6fPloIbts/EshAeYGhnD6El7bIi 89GOeH806He8x7hrc2xgQ7XlVBH/lg7QdAc+VEioxo3LWcX7qrow3yWNGmu9ID7l SKOV0v60KMeqYD+9bRp48odLB0f1tVY4vt4L/vQKQDZB9N1GCwpnvQriQU4qQ5DN j96cQcE4zXcnbrCrnI3g1wDLVolkfIT0d8SoQtNmrIk= =5f46 -----END PGP SIGNATURE----- Merge tag 'nf-26-07-03' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Florian Westphal says: ==================== netfilter: updates for net The following patchset contains Netfilter fixes for *net*, all for ancient problems. Patch 7 raised drive-by sashiko findings, but those are not related to the change itself. 1) Rebuild the nf_nat_sip data pointer to prevent stale access after SKB reallocation. Restrict UDP mangling to UDP streams to avoid TCP packet corruption. 2) Prevent undefined behavior in xt_u32 caused by invalid shift counts. From Wyatt Feng. 3) Use u64 variables to prevent incorrect comparisons on links exceeding 34 Gbps in xt_rateest. From Feng Wu. 4) Cap the number of expectations per master during nfnetlink_cthelper updates. From Pablo Neira Ayuso. 5) Mark malformed IPv6 extension headers for hotdrop in ip6tables. From Zhixing Chen. 6) Skip the end element of an open interval during the get command when its closest match is the interval's start element. Also from Pablo Neira Ayuso. 7) Fix PMTU calculation for GUE/GRE tunnels in IPVS during ICMP fragmentation error handling. Include additional tunnel header length when computing the new MTU. From Yizhou Zhao. 8) Reset full ip_vs_seq structures in ip_vs_conn_new. Also from Yizhou Zhao. 9) Reject invalid shift parameters in xt_connmark. Also from Wyatt Feng. netfilter pull request nf-26-07-03 * tag 'nf-26-07-03' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: xt_connmark: reject invalid shift parameters ipvs: reset full ip_vs_seq structs in ip_vs_conn_new ipvs: fix PMTU for GUE/GRE tunnel ICMP errors netfilter: nft_set_rbtree: get command skips end element with open interval netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop netfilter: nfnetlink_cthelper: cap to maximum number of expectation per master on updates netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() netfilter: xt_u32: reject invalid shift counts netfilter: nf_nat_sip: reload possible stale data pointer ==================== Link: https://patch.msgid.link/20260703125709.16493-1-fw@strlen.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Nirmoy Das
|
dd6a23bac3 |
selftests: net: make busywait timeout clock portable
loopy_wait() expects millisecond timestamps. However, Ubuntu Resolute
can use uutils date, where `date -u +%s%3N` returns seconds plus full
nanoseconds instead of a 3-digit millisecond field. This makes
busywait expire too early and can make vlan_bridge_binding.sh read a
stale operstate.
Fixes:
|
||
|
Shigeru Yoshida
|
a0a558ca7e |
qede: fix off-by-one in BD ring consumption on build_skb failure
qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a NULL return from qede_build_skb(). When it returns NULL under memory pressure, the functions still consume a BD from the ring before returning NULL. The callers then recycle additional BDs, resulting in one extra BD being consumed (off-by-one). This desynchronizes the BD ring, which can corrupt DMA page reference counts and lead to SLUB freelist corruption. Commit |
||
|
Jens Emil Schulz Østergaard
|
d7a8d500d7 |
net: microchip: vcap: fix races on the shared Super VCAP block
The VCAP instances on a chip are not independent, yet they are locked
independently. On sparx5 and lan969x the IS0 and IS2 instances are
backed by the same Super VCAP hardware block and share its cache and
command registers: every access drives the shared VCAP_SUPER_CTRL
register and moves data through the shared cache registers.
Accessing one instance therefore races with accessing another. The
per-instance admin->lock cannot prevent this, as each instance takes a
different lock.
The locking issue is mostly disguised by the fact that the core usage of
the vcap api runs under rtnl. However, the full rule dump in debugfs
decodes rules straight from hardware (a READ command followed by a cache
read) and runs outside rtnl, so it races a concurrent tc-flower rule
write to another Super VCAP instance.
Besides corrupting the dump, the read repopulates the shared cache
between the writers cache fill and its write command, so the writer
commits the wrong data and corrupts the hardware entry.
Introduce vcap_lock() and vcap_unlock() helpers and route every rule
lock site in the VCAP API and its debugfs code through them. Replace the
per-instance admin->lock with a single mutex in struct vcap_control that
serializes access to all instances. The helpers reach it through a new
admin->vctrl back-pointer, and the clients initialise and destroy the
control lock instead of a per-instance one.
No path holds more than one instance lock, so collapsing them onto a
single mutex cannot self-deadlock.
Fixes:
|
||
|
Shuangpeng Bai
|
660667cd40 |
llc: fix SAP refcount leak in llc_ui_autobind()
llc_ui_autobind() opens a SAP after choosing a dynamic LSAP.
llc_sap_open() returns a reference owned by the caller, and
llc_sap_add_socket() takes a second reference for the socket's
membership in the SAP hash tables.
llc_ui_bind() drops the caller's reference after adding the socket,
but llc_ui_autobind() keeps it. When the socket is closed,
llc_sap_remove_socket() releases only the socket reference, leaving
the SAP on llc_sap_list with sk_count == 0.
This is user-visible because repeated autobind and close cycles can consume
all dynamic SAP values and make later autobinds fail with -EUSERS.
Drop the caller's reference after a successful autobind, matching
llc_ui_bind()'s ownership model.
Fixes:
|
||
|
Paolo Abeni
|
d645674342 |
Merge branch 'net-mlx5e-fix-crashes-in-dynamic-per-channel-stats-and-hv-vhca-agent'
Tariq Toukan says:
====================
net/mlx5e: Fix crashes in dynamic per-channel stats and HV VHCA agent
Since per-channel stats were converted to be allocated and published
lazily at first channel open in commit
|
||
|
Feng Liu
|
5a799714e8 |
net/mlx5e: Fix publication race for priv->channel_stats[]
mlx5e_channel_stats_alloc() publishes a new entry to
priv->channel_stats[] and then increments priv->stats_nch as a
publication token, but neither store carries any memory barrier:
priv->channel_stats[ix] = kvzalloc_node(...);
if (!priv->channel_stats[ix])
return -ENOMEM;
priv->stats_nch++;
Concurrent readers compute the loop bound from priv->stats_nch and
then dereference priv->channel_stats[i] using plain accesses, e.g.
for (i = 0; i < priv->stats_nch; i++) {
struct mlx5e_channel_stats *cs = priv->channel_stats[i];
... cs->rq.packets ...
}
On weakly-ordered architectures (ARM, PowerPC, RISC-V) the writes to
channel_stats[ix] and stats_nch may become visible to other CPUs out
of program order. A reader can observe stats_nch == N while still
seeing channel_stats[N-1] == NULL, leading to a NULL pointer
dereference in the channel_stats loop.
This has been observed in production on BlueField-3 DPUs (arm64),
where ovs-vswitchd queries netdev statistics over netlink during NIC
bringup, racing mlx5e_open_channel() -> mlx5e_channel_stats_alloc()
on another CPU:
Unable to handle kernel NULL pointer dereference at virtual address 0x840
Hardware name: BlueField-3 DPU
pc : mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core]
Call trace:
mlx5e_fold_sw_stats64+0x30/0x180 [mlx5_core]
dev_get_stats+0x50/0xc0
ovs_vport_get_stats+0x38/0xac [openvswitch]
ovs_vport_cmd_fill_info+0x194/0x290 [openvswitch]
ovs_vport_cmd_get+0xbc/0x10c [openvswitch]
genl_family_rcv_msg_doit+0xd0/0x160
genl_rcv_msg+0xec/0x1f0
netlink_rcv_skb+0x64/0x130
genl_rcv+0x40/0x60
netlink_unicast+0x2fc/0x370
netlink_sendmsg+0x1dc/0x454
...
__arm64_sys_sendmsg+0x2c/0x40
Add mlx5e_stats_nch_write() and mlx5e_stats_nch_read() helpers in en.h
that wrap the smp_store_release()/smp_load_acquire() pair on stats_nch.
The release/acquire pair establishes the contract:
stats_nch == N => channel_stats[0..N-1] are visible and non-NULL.
Publish the stats_nch increment via mlx5e_stats_nch_write() in the
writer (mlx5e_channel_stats_alloc()), and read stats_nch via
mlx5e_stats_nch_read() in all readers: mlx5e RX/TX queue stats,
mlx5e_get_base_stats(), ethtool channels stats, IPoIB stats, the
sw_stats fold and the HV VHCA stats agent.
Fixes:
|
||
|
Feng Liu
|
89b25b5f46 |
net/mlx5e: Fix HV VHCA stats agent registration race
mlx5e_hv_vhca_stats_create() registers the stats agent through
mlx5_hv_vhca_agent_create(). The helper publishes the agent in
hv_vhca->agents[type] under agents_lock and immediately schedules an
asynchronous control invalidation on the HV VHCA workqueue before
returning to mlx5e.
The asynchronous invalidation invokes the control agent's invalidate
callback, which reads the hypervisor control block and forwards the
command to mlx5e_hv_vhca_stats_control(). That callback may either:
- call cancel_delayed_work_sync(&priv->stats_agent.work), or
- call queue_delayed_work(priv->wq, &sagent->work, sagent->delay).
However, the delayed_work and priv->stats_agent.agent are only
initialized after mlx5_hv_vhca_agent_create() returns to mlx5e:
agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */
...
priv->stats_agent.agent = agent; /* too late */
INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */
If the asynchronous control path runs before the two assignments
above, it can:
- Operate on an uninitialized delayed_work whose timer.function is
NULL. queue_delayed_work() calls add_timer() unconditionally, so
when the timer expires the timer softirq invokes a NULL function
pointer.
- Re-initialize the timer later through INIT_DELAYED_WORK() while
the timer is already enqueued in the timer wheel, corrupting the
hlist (entry.pprev cleared while the previous bucket node still
points at this entry).
- When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads
sagent->agent (NULL) and dereferences it inside
mlx5_hv_vhca_agent_write().
Fix this by:
- Initializing priv->stats_agent.work before invoking
mlx5_hv_vhca_agent_create(), so the work is always in a valid
state when the control callback observes it.
- Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter
to mlx5_hv_vhca_agent_create(). The helper writes the agent
pointer to *ctx_update before publishing into hv_vhca->agents[]
and triggering the agents_update flow, so any callback
subsequently invoked from that flow already sees a valid
priv->stats_agent.agent. This avoids having the control
callback participate in agent initialization.
While at it, access priv->stats_agent.agent with
READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and
clear priv->stats_agent.buf on the agent_create() failure path.
Fixes:
|
||
|
Feng Liu
|
25f6b929c7 |
net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation
mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(),
before mlx5e_open(). At that point priv->stats_nch is still zero,
because it is only ever incremented in mlx5e_channel_stats_alloc(),
which is reached only from mlx5e_open_channel().
mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and
kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather
than NULL. The "if (!buf)" guard does not catch this, and
mlx5e_hv_vhca_stats_create() completes "successfully" with
priv->stats_agent.buf set to ZERO_SIZE_PTR.
Once channels are opened (priv->stats_nch > 0) and the hypervisor
enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes
buf_len using the new non-zero stats_nch and calls
memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10.
Allocate the buffer based on priv->max_nch, which is set in
mlx5e_priv_init() and is the upper bound on stats_nch:
- Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that
returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and
use it for the kvzalloc() in mlx5e_hv_vhca_stats_create().
- Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on
stats_nch) for the worker's active payload size, so the wire
format (block->rings = stats_nch) and the amount of data filled
by mlx5e_hv_vhca_fill_stats() are unchanged.
The max(max_nch, stats_nch) guard handles the rare case where
mlx5e_attach_netdev() recomputes max_nch downward across a
detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev
does not call mlx5e_priv_cleanup, so stats_nch is only reset when
the netdev is destroyed). Without the guard, the worker could compute
buf_len from stats_nch and overrun the smaller buffer allocated based
on the reduced max_nch.
Allocating a non-zero buffer also makes the kvzalloc() failure path in
mlx5e_hv_vhca_stats_create() reachable for the first time: it returns
early without (re)creating the agent. Clear
priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after
freeing them, so that if a later create() bails out on this path, a
subsequent teardown does not double-free the stale agent/buffer left
from a previous enable/disable cycle.
This mirrors the existing mlx5e pattern of preallocating arrays of
size max_nch (e.g. priv->channel_stats) and lazily populating
entries up to stats_nch on demand.
Fixes:
|
||
|
Paolo Abeni
|
88c4273ab4 |
Merge branch 'net-mlx5-lag-bug-fixes'
Tariq Toukan says: ==================== net/mlx5: LAG bug fixes Three bug fixes by Shay in the mlx5 LAG subsystem. Patch 1 fixes an off-by-one in the error rollback path of mlx5_lag_create_single_fdb_filter(): the loop started from the failed index i, potentially operating on uninitialized state or double-tearing-down an entry that had already self-rolled-back. The rollback should start from i - 1. Patch 2 fixes a hang in mlx5_mpesw_work(): when mlx5_lag_get_devcom_comp() returns NULL the function returned early without calling complete(), blocking any caller waiting on mpesww->comp indefinitely. Patch 3 fixes a kernel crash during teardown when mlx5_lag_get_dev_seq() returns an error because no device is marked as master or the peer is no longer in the LAG. The peer flow cleanup is now skipped instead of proceeding with a bad pointer. This series by Shay fixes three bugs in the mlx5 LAG subsystem. v1: https://lore.kernel.org/all/20260617063204.547427-2-tariqt@nvidia.com/ ==================== Link: https://patch.msgid.link/20260630112917.698313-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Shay Drory
|
7bed4af0ce |
net/mlx5e: TC, skip peer flow cleanup when LAG seq is unavailable
mlx5_lag_get_dev_seq() will return error when the peer isn't in the LAG
or when no device is marked as master. Result bad memory access and kernel
crash[1].
Hence, skip the peer when lookup fails.
Note: In case there are peer flows, they are cleaned before LAG cleared
the master mark.
[1]
RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0x3d/0x350 [mlx5_core]
Call Trace:
<TASK>
mlx5e_tc_clean_fdb_peer_flows+0xc1/0x130 [mlx5_core]
mlx5_esw_offloads_unpair+0x3a/0x400 [mlx5_core]
mlx5_esw_offloads_devcom_event+0xee/0x360 [mlx5_core]
mlx5_devcom_send_event+0x7a/0x140 [mlx5_core]
mlx5_esw_offloads_devcom_cleanup+0x2f/0x90 [mlx5_core]
mlx5e_tc_esw_cleanup+0x28/0xf0 [mlx5_core]
mlx5e_rep_tc_cleanup+0x19/0x30 [mlx5_core]
mlx5e_cleanup_uplink_rep_tx+0x36/0x40 [mlx5_core]
mlx5e_cleanup_rep_tx+0x55/0x60 [mlx5_core]
mlx5e_detach_netdev+0x96/0xf0 [mlx5_core]
mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core]
mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
mlx5e_vport_rep_unload+0xdd/0x110 [mlx5_core]
__esw_offloads_unload_rep+0x81/0xb0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1d7/0x220 [mlx5_core]
mlx5e_rep_remove+0x22/0x30 [mlx5_core]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xe8/0x1b0
device_del+0x159/0x3c0
mlx5_rescan_drivers_locked+0xbc/0x2d0 [mlx5_core]
mlx5_unregister_device+0x54/0x80 [mlx5_core]
mlx5_uninit_one+0x73/0x130 [mlx5_core]
remove_one+0x78/0xe0 [mlx5_core]
pci_device_remove+0x39/0xa0
Fixes:
|
||
|
Shay Drory
|
d4b85f9a66 |
net/mlx5: LAG, MPESW, Fix missing complete() on devcom error
mlx5_mpesw_work() returned without calling complete() when
mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the
work and waited on mpesww->comp would block indefinitely.
Funnel the early-return path through a new "complete" label so the
waiter is always woken.
Fixes:
|
||
|
Shay Drory
|
0f0e4ae697 |
net/mlx5: LAG, Fix off-by-one in single-FDB error rollback
On failure at index i, the reverse cleanup loop in
mlx5_lag_create_single_fdb() starts from i, so the failed index
itself is rolled back. That can operate on uninitialized state or
double-tear-down a rule the add_one path already self-rolled-back.
Start the rollback from i - 1 so only successfully-installed entries
are undone.
Fixes:
|
||
|
Yousef Alhouseen
|
539dfcf691 |
mac802154: remove interfaces with RCU list deletion
Queue wake, stop, and disable paths walk local->interfaces under RCU.
The bulk hardware teardown path removes entries with list_del(), so an
asynchronous transmit completion can follow a poisoned list node in
ieee802154_wake_queue().
Use list_del_rcu() as in the single-interface removal path. The following
unregister_netdevice() waits for in-flight RCU readers before freeing the
netdevice, so no separate grace-period wait is needed.
Fixes:
|
||
|
Jamal Hadi Salim
|
6301f6a34e |
net/sched: sch_teql: move rcu_read_lock()/spin_lock() from _bh variants
This is a followup based on sashiko comments [1] on commit |
||
|
Wyatt Feng
|
1b47026fb4 |
netfilter: xt_connmark: reject invalid shift parameters
Revision 2 of the CONNMARK target accepts user-controlled shift
parameters and applies them to 32-bit mark values in
connmark_tg_shift().
A shift_bits value of 32 or more triggers an undefined-shift bug when
the rule is evaluated. Invalid shift_dir values are also accepted and
silently fall back to the left-shift path.
Reject invalid revision-2 shift parameters in connmark_tg_check() so
malformed rules fail at installation time, before they can reach the
packet path.
Fixes:
|
||
|
Yizhou Zhao
|
2975324d16 |
ipvs: reset full ip_vs_seq structs in ip_vs_conn_new
Commit |
||
|
Yizhou Zhao
|
6b335af0d0 |
ipvs: fix PMTU for GUE/GRE tunnel ICMP errors
When an ICMP Fragmentation Needed error is received for a tunneled IPVS
connection, ip_vs_in_icmp() recomputes the MTU that the original packet
can use by subtracting the tunnel overhead from the reported next-hop
MTU.
The current code always subtracts sizeof(struct iphdr), which is only
the IPIP overhead. For GUE and GRE tunnels, ipvs_udp_decap() and
ipvs_gre_decap() already compute the additional tunnel header length,
but that value is scoped to the decapsulation block and is lost before
the ICMP_FRAG_NEEDED handling. As a result, the ICMP error sent back to
the client advertises an MTU that is too large, so PMTUD can fail to
converge for GUE/GRE-tunneled real servers.
With a reported next-hop MTU of 1400, a GUE tunnel currently returns
1380 to the client. The correct value is 1368:
1400 - sizeof(struct iphdr) - sizeof(struct udphdr) -
sizeof(struct guehdr)
Hoist the tunnel header length into the main ip_vs_in_icmp() scope and
subtract sizeof(struct iphdr) + ulen in the Fragmentation Needed path.
The IPIP path keeps ulen as 0, so its existing 1400 - 20 = 1380 result
is unchanged.
Fixes:
|
||
|
Pablo Neira Ayuso
|
d63611cbe8 |
netfilter: nft_set_rbtree: get command skips end element with open interval
The get command on intervals provide partial matches such as subranges
for usability reasons. However, an open interval has no closing end
element. If the closing element matches within the range of the open
internal, ie. its closest match is the start element of the open range,
then, return 0 but offer no matching element to userspace through
netlink as a special case. Userspace provides at least a matching start
element in this case and the closing end element matching the open
interal is ignored.
Another possibility is to report the matching start element of the open
interval for this end interval. However, this results in duplicated
matching being listed in userspace because userspace does not expect a
start element as response to a end element.
Fixes:
|
||
|
Zhixing Chen
|
43ccc20b5a |
netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop
The ah, hbh and rt matches check that the fixed extension header is
present, then use the header length field to derive the advertised
extension header length for matching.
For the ah match, add the missing advertised-length check. For hbh
and rt, update the existing advertised-length checks. In all three
cases, set hotdrop to true before returning false when the advertised
extension header length exceeds the available skb data.
Returning false treats the packet as a rule mismatch. Set hotdrop to
true and drop malformed packets so they cannot bypass rules intended
to drop packets with these IPv6 extension headers.
Fixes:
|
||
|
Pablo Neira Ayuso
|
278296b69f |
netfilter: nfnetlink_cthelper: cap to maximum number of expectation per master on updates
Really cap it to NF_CT_EXPECT_MAX_CNT (255) on updates.
The commit ("netfilter: nfnetlink_cthelper: cap to maximum number of
expectation per master") only covers creation of helpers, not updates.
Fixes:
|
||
|
Feng Wu
|
444853cd43 |
netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt()
On links faster than ~34 Gbps, where byte rate may exceed 2^32-1
(~ 4.3 GBps), the comparison result becomes incorrect because the
truncated value no longer reflects the actual estimator rate.
Fix by changing the local variables to u64.
Fixes:
|
||
|
Wyatt Feng
|
64cdf7d30a |
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path.
Fixes:
|
||
|
Florian Westphal
|
77e43bcb7e |
netfilter: nf_nat_sip: reload possible stale data pointer
quoting sashiko:
------------------------------------------------------------------------
[..] noticed a potential memory bug and header corruption involving the
SIP NAT helper.
In net/netfilter/nf_nat_sip.c:nf_nat_sip():
if (skb_ensure_writable(skb, skb->len)) {
nf_ct_helper_log(skb, ct, "cannot mangle packet");
return NF_DROP;
}
uh = (void *)skb->data + protoff;
uh->dest = ct_sip_info->forced_dport;
if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff,
0, 0, NULL, 0)) {
If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the
old data buffer is freed. However, nf_nat_sip() fails to update *dptr to
point to the new buffer.
It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP
packet, which would overwrite the sequence number with a checksum update.
------------------------------------------------------------------------
nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen.
But clones are possible, so rebuild dptr.
Disable nf_nat_mangle_udp_packet() branch for TCP streams.
It doesn't look like this can ever happen, else we should have received
bug reports about this, so just check the conntrack is UDP and drop
otherwise.
The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages,
so I don't think this is ever expected to be true for a TCP stream.
Fixes:
|
||
|
Qihang
|
d335dcc6f5 |
gue: validate REMCSUM private option length
GUE private flags can indicate that remote checksum offload metadata is
present. The private flags field itself is accounted for by
guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even
when GUE_PFLAG_REMCSUM is set.
This lets a packet with only the private flags field pass
validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum()
read the missing REMCSUM start/offset fields from the following bytes.
Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that
malformed packets are rejected during option validation.
Fixes:
|
||
|
Dawei Feng
|
62e7df6d04 |
octeontx2-pf: fix SQB pointer leak on init failure
otx2_init_hw_resources() initializes SQ aura and pool resources before
several later setup steps. On failure, err_free_sq_ptrs only frees SQB
pages, leaving the per-SQ sqb_ptrs arrays behind.
Use otx2_free_sq_res() for the SQ unwind path and let it free sqb_ptrs
even when sq->sqe has not been allocated yet.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
OcteonTX2 PF device and the corresponding AF mailbox setup to test with,
no runtime testing was able to be performed.
Fixes:
|
||
|
Xiang Mei
|
03f384bc0c |
net: usb: net1080: validate packet_len before pad-byte access in rx_fixup
For an even packet_len, net1080_rx_fixup() reads the pad byte at
skb->data[packet_len] before the skb->len != packet_len check further
down, and packet_len is only bounded against NC_MAX_PACKET. A malicious
NetChip 1080 device can send a short frame advertising a large even
packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the
skb:
BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup
Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14
...
net1080_rx_fixup (drivers/net/usb/net1080.c:384)
usbnet_bh (drivers/net/usb/usbnet.c:1589)
process_one_work (kernel/workqueue.c:3322)
bh_worker (kernel/workqueue.c:3708)
tasklet_action (kernel/softirq.c:965)
handle_softirqs (kernel/softirq.c:622)
...
Reject the frame when packet_len >= skb->len before reading.
Fixes:
|
||
|
Linus Torvalds
|
87320be9f0 |
Including fixes from netfilter and batman-adv.
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth: virtio_net: disable cb when NAPI is busy-polled
- eth: lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth: mlx5e: fix use-after-free of metadata_dst on RX SC delete
- eth: enetc: check the number of BDs needed for xdp_frame
- eth: fbnic: don't cache shinfo across skb realloc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=E5mR
-----END PGP SIGNATURE-----
Merge tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and batman-adv.
Current release - new code bugs:
- netfilter: cthelper: cap to maximum number of expectation per master
Previous releases - regressions:
- netpoll: fix a use-after-free on shutdown path
- tcp: restore RCU grace period in tcp_ao_destroy_sock
- ipv6: fix NULL deref in fib6_walk_continiue() on multi-batch dump
- batman-adv: dat: ensure accessible eth_hdr proto field
- eth:
- virtio_net: disable cb when NAPI is busy-polled
- lan743x: Initialize eth_syslock spinlock before use
Previous releases - always broken:
- netfilter:
- nft_set_pipapo: don't leak bad clone into future transaction
- sched:
- sch_teql: Introduce slaves_lock to avoid race condition and UAF
- replace direct dequeue call with peek and qdisc_dequeue_peeked
- sctp: add INIT verification after cookie unpacking
- tipc: fix out-of-bounds read in broadcast Gap ACK blocks
- seg6: validate SRH length before reading fixed fields
- eth:
- mlx5e: fix use-after-free of metadata_dst on RX SC delete
- enetc: check the number of BDs needed for xdp_frame
- fbnic: don't cache shinfo across skb realloc"
* tag 'net-7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net/mlx5: HWS, fix matcher leak on resize target setup failure
net/sched: hhf: clear heavy-hitter state on reset
net/sched: dualpi2: clear stale classification on filter miss
net/sched: act_bpf: use rcu_dereference_bh() to read the filter
selftests: drv-net: tso: don't touch dangerous feature bits
cxgb4: Fix decode strings dump for T6 adapters
virtio_net: disable cb when NAPI is busy-polled
sctp: fix addr_wq_timer race in sctp_free_addr_wq()
selftests: net: bump default cmd() timeout to 20 seconds
bridge: stp: Fix a potential use-after-free when deleting a bridge
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
net: gianfar: dispose irq mappings on probe failure and device removal
net: lan743x: Initialize eth_syslock spinlock before use
net: libwx: fix VMDQ mask for 1-queue mode
net: airoha: fix max receive size configuration
fsl/fman: Free init resources on KeyGen failure in fman_init()
netfilter: nftables: restrict checkum update offset
netfilter: nftables: restrict linklayer and network header writes
netfilter: nfnetlink_queue: restrict writes to network header
netfilter: nft_fib: reject fib expression on the netdev egress hook
...
|
||
|
Linus Torvalds
|
a9d4dd7424 |
hwmon fixes for v7.2-rc2
- adm1275: Detect coefficient overflow, and prevent reading uninitialized stack - aspeed-g6-pwm-tach: Guard fan RPM calculation against divide-by-zero - asus_atk0110: Check package count before accessing element - ltc4283: fix malformed table docs build error - occ: Unregister sysfs devices outside occ lock to avoid lockdep warning - pmbus core: Fix passing events to regulator core, and honor vrm_version in pmbus_data2reg_vid() - w83627hf: Remove VID sysfs files on error and remove - w83793: remove vrm sysfs file on probe failure - Various: Add missing 'select REGMAP_I2C' to Kconfig -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmpGaa0ACgkQyx8mb86f mYGZAw/+JjAS7LyUalHftEL2FCoK+yrTHBE86JZxcf+WDLh52+WSjAeAjbAwmeSv 2o6lWRPt0BaHSS0dTT5JZ7tCRn8swIdoCUQys8AFDTMNIaLnrgiS3qJLm0WP1I1U dLzC2L8DWajeWtyvFPJT0H7Bq7AX/hOpCwJICMu9bPCP1FwafrUgkRCqmWAb2AS9 vmLrmqGphehRbB47qw0yuoDb1rttCWfWIYqyVyBzy4uJP5XtdJt9+DyQXysP3vCD 8lAIVxLr8eSSYPjvL15mD7VT5JJwYpiN2VaI/ZwqPpAochvT4BvwirTVzUFe0OF8 ZxlHX0zQG0EW2SU5hxQ1VlqFi38u4M5qlmf+FSWJyPaxde5PFFtrl6SONy5Dflvi IDVPFTm2MS3FWjzGYSswUcAshqI+AtQIhi/9QsO4kME8SSLRdnvTBneGpnVpZHQe V2RlnnnhwS2OJK+1yIe7lDyFN7alE+mREB8RnOHlr/yLX8fM3LzzhtnmSKpqo0Aq bTYsm+lwd3sefAuxmcrKJ5YLbv41clNQzoMMuhglKqF/HS1eX+WABOE8MVVfGL/V CBjFNBw9iIY7H9jTBR+3OMx1tanmUyf4dga/vggzXOhMVRGwUNkaIe+zS/d6iaTr GujoVJBXjd0RCHUxxYuvRa+CUkbuUARRUMOrSlYTFQkzaooTlAE= =wyCy -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - adm1275: Detect coefficient overflow, and prevent reading uninitialized stack - aspeed-g6-pwm-tach: Guard fan RPM calculation against divide-by-zero - asus_atk0110: Check package count before accessing element - ltc4283: fix malformed table docs build error - occ: Unregister sysfs devices outside occ lock to avoid lockdep warning - pmbus core: Fix passing events to regulator core, and honor vrm_version in pmbus_data2reg_vid() - w83627hf: Remove VID sysfs files on error and remove - w83793: remove vrm sysfs file on probe failure - Various: Add missing 'select REGMAP_I2C' to Kconfig * tag 'hwmon-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero hwmon: (pmbus) Fix passing events to regulator core hwmon: adm1275: Detect coefficient overflow hwmon: adm1275: Prevent reading uninitialized stack hwmon: (max6697) add missing 'select REGMAP_I2C' to Kconfig hwmon: (ltc2992) add missing 'select REGMAP_I2C' to Kconfig hwmon: (max1619) add missing 'select REGMAP' to Kconfig hwmon: (w83627hf) remove VID sysfs files on error and remove hwmon: (w83793) remove vrm sysfs file on probe failure hwmon: (asus_atk0110) Check package count before accessing element docs: hwmon: ltc4283: fix malformed table docs build error hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() hwmon: (occ) unregister sysfs devices outside occ lock |