All switch families have been converted to have their own
ds->ops->setup() methods and to call the common ksz_teardown().
Remove the no longer used ksz_setup() function and the associated
ksz_dev_ops callbacks.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-5-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KSZ switch families are sufficiently different that a common
ds->ops->setup() - ksz_setup() with micro-managed dev_ops->reset(),
dev_ops->pcs_create(), dev_ops->config_cpu_port(),
dev_ops->enable_stp_addr(), dev_ops->setup() seems to be too convoluted.
I am proposing to make each KSZ switch family part ways for
dsa_switch_ops :: setup() and teardown(), to allow them greater
flexibility. This here is the implementation for ksz8, which is
nothing other than a copy of ksz_setup() with the dev_ops function
pointers replaced with direct function calls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-4-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KSZ switch families are sufficiently different that a common
ds->ops->setup() - ksz_setup() with micro-managed dev_ops->reset(),
dev_ops->pcs_create(), dev_ops->config_cpu_port(),
dev_ops->enable_stp_addr(), dev_ops->setup() seems to be too convoluted.
I am proposing to make each KSZ switch family part ways for
dsa_switch_ops :: setup() and teardown(), to allow them greater
flexibility. This here is the implementation for ksz9477, which is
nothing other than a copy of ksz_setup() with the dev_ops function
pointers replaced with direct function calls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-3-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KSZ switch families are sufficiently different that a common
ds->ops->setup() - ksz_setup() with micro-managed dev_ops->reset(),
dev_ops->pcs_create(), dev_ops->config_cpu_port(),
dev_ops->enable_stp_addr(), dev_ops->setup() seems to be too convoluted.
I am proposing to make each KSZ switch family part ways for
dsa_switch_ops :: setup() and teardown(), to allow them greater
flexibility. This here is the implementation for lan937x, which is
nothing other than a copy of ksz_setup() with the dev_ops function
pointers replaced with direct function calls.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-2-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_switch driver is one of the few which reset the switch when
unbinding the driver or shutting down - in the same category with
ar9331_sw_remove(), bcm_sf2_sw_remove(), and ks8995_remove(),
vsc73xx_remove() and lan9303_remove().
I don't think there exists any requirement to do this, and in fact it
does create complications for WoL, as the code already shows.
My issue with this logic is that it is the only thing keeping
dev_ops->reset() necessary, which I would like to remove after
individual KSZ switch families get their own setup() and teardown()
methods that don't go through dev_ops.
Don't reset the switch when unbinding the driver or shutting down.
Remove the exit callbacks from the ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260521-clean-ksz-2nd-series-v3-1-75c38971c19a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MMC_XGMAC_RX_CRC_ERR is clear-on-read, and just a single read would
update the mmc_rx_crc_error counter.
The duplicate read appears to have been unintentionally introduced in
the intial MMC counter implementation [1]. The databook does not mention
MMC_XGMAC_RX_CRC_ERR needing the additional read.
[1] commit b6cdf09f51 ("net: stmmac: xgmac: Implement MMC counters")
Signed-off-by: Abid Ali <dev.taqnialabs@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260521-xgmac-mmc_rx_crc-cleanup-v2-1-7d9de09f5898@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We plan to no longer hold RTNL in "ip link show", and use RCU instead.
Assume rtnl_fill_dpll_pin() will have to fill DPLL_A_PIN_ID.
It is fine to over-estimate skb size (by 8 bytes) in if_nlmsg_size().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260521171440.114956-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_af_lookup() does not rely on RTNL anymoe, remove the stale
ASSERT_RTNL().
Add a private spinlock (rtnl_af_ops_lock) to protect rtnl_af_ops
list instead of using RTNL.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260521174038.204481-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
React to TC_SETUP_QDISC_TBF and configure the egress shaper as
appropriate with the maximum rate and burst size requested by the user.
Per queue shaper is possible, though not touched in this commit.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260521010320.208138-4-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers might have error messages to propagate to user space. Propagate
the netlink extack so that they can inform user space in a verbal way of
their limitations.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260521010320.208138-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use NL_SET_ERR_MSG_WEAK so any existing error message (probably from the
underlying driver) is used instead of the generic fallback.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260521010320.208138-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ethan Nelson-Moore says:
====================
ARCnet: remove outdated drivers and information and unused code; small cleanups and documentation improvements
This patch series mainly removes the ISA and PCMCIA ARCnet drivers and
documentation for them and hardware they supported. While ARCnet is still
used in industrial environments, and cards are still manufactured,
it is unlikely anyone is still using it with ISA and PCMCIA cards.
Removing these drivers reduces future maintenance burden.
While updating the ARCnet documentation to remove references to the removed
drivers, I noticed that it contained thousands of lines of outdated and
irrelevant information (much of it so outdated that it would not even work
on modern kernels). I took the opportunity to remove this information
and improve the writing style slightly.
I noticed that the BUS_ALIGN macro was always defined to 1, which meant
that the custom arcnet_in/out/read/write* I/O macros were unnecessary.
I expanded and removed them to make the code more straightforwards.
I also corrected some typos and comments.
====================
Link: https://patch.msgid.link/20260521001631.45434-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When compiling the com20020-pci driver with W=1, I received the
following warning:
drivers/net/arcnet/com20020-pci.c:224:71: warning: ‘%d’ directive
output may be truncated writing between 1 and 11 bytes into a region of
size between 10 and 11 [-Wformat-truncation=]
224 | snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i);
In reality, this does not represent a problem, because i is bounded by
the .devcount field in struct com20020_pci_card_info, which is
statically defined for each card and very small. Quiet the invalid
warning by changing the type of i and the .devcount field to be
narrower.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-8-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ARCnet documentation contains a lot of outdated and irrelevant
information (such as changes in decades-old driver versions and
messages from a former maintainer) and has some writing style issues.
Remove this unnecessary information and improve the writing style. Also
remove links to pages that no longer exist.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-7-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the BUS_ALIGN variable has been removed, the
arcnet_in/out/read/write* macros behave identically to the functions
they wrap. Expand them and remove their definitions to make the code
easier to maintain.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-6-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CONFIG_SA1100_CT6001 option has never existed in the kernel. Remove
code in arcdevice.h referring to it. This allows the
arcnet_(in|out)(s|)b macros to be simplified by removing the BUS_ALIGN
macro.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-5-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While ARCnet is still used in industrial environments, and cards are
still manufactured, it is unlikely anyone is still using it with ISA
and PCMCIA cards. Reduce future maintenance burden by removing all ISA
and PCMCIA ARCnet drivers and documentation related to them. Update
instructions for loading modules and passing parameters to work on
modern kernels and with the com20020_pci driver. Also take the
opportunity to document the rest of the module parameters, correct a
file path in Documentation/networking/arcnet.rst, and change a
reference to /etc/rc.inet1, which no longer exists, to refer to
ifconfig.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-4-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ARCnet code contains quite a few typos in comments. Fix them.
Initially noticed by inspection, then augmented using codespell.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-3-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ARCnet does not support multicast, only unicast and broadcast. In spite
of this, the com20020 driver contains several references to multicast
in a comment and a function name, including a FIXME that it should be
implemented. Adjust the comment to make the lack of multicast support
clear and rename com20020_set_mc_list to com20020_set_rx_mode.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260521001631.45434-2-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In test_mutliproc(), when send() or recv() returns an error (e.g.,
-1), the test continues to execute the remaining code and fails
repeatedly due to using EXPECT_GE.
For example, if a TLS connection is broken and recv() returns -1,
EXPECT_GE(res, 0) records a failure but does not stop the test.
The test then proceeds with left -= res (where res = -1), causing
left to increase unexpectedly, and the loop continues indefinitely.
This results in a massive number of identical failure messages:
# tls.c:1686:mutliproc_sendpage_writers:Expected res (-1) >= 0 (0)
# tls.c:1686:mutliproc_sendpage_writers:Expected res (-1) >= 0 (0)
... (hundreds of identical failures)
Fix this by replacing EXPECT_GE with ASSERT_GE. When send() or recv()
fails, ASSERT_GE immediately aborts the current test, preventing
the subsequent undefined behavior and endless failure messages.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://patch.msgid.link/0ee9f412b6bd1a260a547d19f979f73b396746ac.1779354585.git.tanggeliang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: convert atm/xdp/af_iucv/l2tp_ppp/rxrpc/tipc to getsockopt_iter
This series continues the conversion of the remaining proto_ops getsockopt
callbacks to the new getsockopt_iter callback introduced in commit 67fab22a7a
("net: add getsockopt_iter callback to proto_ops").
The new callback takes a sockopt_t — a type-safe wrapper around iov_iter
plus an optlen field — instead of raw __user pointers. This:
- Replaces (char __user *optval, int __user *optlen) with sockopt_t *opt
- Reads the input buffer size from opt->optlen instead of get_user()
- Writes the option value via copy_to_iter() instead of copy_to_user()
- Reports the returned length via opt->optlen instead of put_user(),
independently of the bytes copied through the iter
Each conversion is a behaviour-preserving and code-style-preserving refactor;
no big changes being introduced, even when the code looks weird.
====================
Link: https://patch.msgid.link/20260520-getsock_four-v3-0-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert TIPC sockets (msg, packet, stream proto_ops) to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *sopt
- Use sopt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
The sockopt_t parameter is named sopt to avoid collision with the
existing optname parameter named opt.
Note: Dropped the unnecessary parentheses to make checkpatch happier.
Also dropped two now-stale comments that referred to the old "res"
variable handling.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-6-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert RxRPC socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-5-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert PPPoL2TP socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-4-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert XDP socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-3-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the ATM SVC and PVC sockets, along with the shared
vcc_getsockopt() helper, to use the new getsockopt_iter callback with
sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-2-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert IUCV socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260520-getsock_four-v3-1-b8c0b16b7780@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add debugfs entries to expose hardware configuration and diagnostic
information that aids in debugging driver initialization and runtime
operations without adding noise to dmesg.
The debugfs directory for each PCI device is named using pci_name()
(the unique BDF address), and its creation and removal is integrated
into mana_gd_setup() and mana_gd_cleanup_device() respectively, so
that all callers (probe, remove, suspend, resume, shutdown) share a
single code path.
Device-level entries (under /sys/kernel/debug/mana/<BDF>/):
- num_msix_usable, max_num_queues: Max resources from hardware
- gdma_protocol_ver, pf_cap_flags1: VF version negotiation results
- num_vports, bm_hostmode: Device configuration
Per-vPort entries (under /sys/kernel/debug/mana/<BDF>/vportN/):
- port_handle: Hardware vPort handle
- max_sq, max_rq: Max queues from vPort config
- indir_table_sz: Indirection table size
- steer_rx, steer_rss, steer_update_tab, steer_cqe_coalescing:
Last applied steering configuration parameters
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260519064621.772154-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 150061a206 ("net/sched: fq_codel: local packets no longer count against memory limit")
made fq_codel not account for local packets in the
memory limit. Since tests a4bb, a4be, a4bf, a4c0, a4c1 were relying on
these packets being accounted so that parent's qlen notify callback was
executed, they broke.
Fix the tests by adding the qdiscs to ifb instead and making it see
mirred packets that came from scapy. That way the packets are accounted
in the memory limit and the parent's qlen notify callback is still
executed.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260521150811.1896373-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for ifb devices in tdc so that tests with the nsPlugin are
able to use it when necessary.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260521150811.1896373-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
-----BEGIN PGP SIGNATURE-----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=XLqG
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Not much going on here right now:
- mac80211/hwsim:
- some NAN related things
- MCS/NSS rate issues with S1G
- p54: port SPI version to device-tree
- (a few other random things)
* tag 'wireless-next-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
ARM: dts: omap2: add stlc4560 spi-wireless node
p54spi: convert to devicetree
dt-bindings: net: add st,stlc4560/p54spi binding
wifi: mac80211: allow cipher change on NAN_DATA interfaces
wifi: mac80211_hwsim: Do not declare NAN support for Extended Key ID
wifi: cfg80211: add a function to parse UHR DBE
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
wifi: mac80211: Allow per station GTK for NAN Data interfaces
wifi: mac80211_hwsim: advertise NPCA capability
wifi: mac80211_hwsim: reject NAN on multi-radio wiphys
wifi: plfxlc: use module_usb_driver() macro
wifi: mac80211: don't recalc min def for S1G chan ctx
wifi: mac80211: skip NSS and BW init for S1G sta
wifi: mac80211: check stations are removed before MLD change
wifi: rt2x00: allocate anchor with rt2x00dev
====================
Link: https://patch.msgid.link/20260521153519.380276-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - fix to a fix:
- Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
- vsock/virtio: relax the recently added memory limit a little
Current release - regressions:
- IB/IPoIB: make sure IB drivers always use async set_rx_mode since
some (mlx5) are now required to use it due to locking changes
Previous releases - regressions:
- udp: fix UDP length on last GSO_PARTIAL segment
- af_unix: fix UAF read of tail->len in unix_stream_data_wait()
- tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
- mlx5e: fix unlocked writing to ICOSQ, breaking AF_XDP
Previous releases - always broken:
- tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
- ipv4: raw: reject IP_HDRINCL packets with ihl < 5
- Bluetooth: a lot of locking and concurrency fixes (as always)
- batman-adv (mesh wireless networking): a lot of random fixes
for issues reported by security researchers and Sashiko
- netfilter: same thing, a lot of small security-ish fixes
all over the place, nothing really stands out
Misc:
- bring back the old 3c509 driver, Maciej wants to maintain it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ei7U
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, wireless and netfilter.
Craziness continues with no end in sight. Even discounting the driver
revert this is a pretty huge PR for standards of the previous era. I'd
speculate - we haven't seen the worst of it, yet. Good news, I guess,
is that so far we haven't seen many (any?) cases of "AI reported a
bug, we fixed it and a real user regressed".
Current release - fix to a fix:
- Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
- vsock/virtio: relax the recently added memory limit a little
Current release - regressions:
- IB/IPoIB: make sure IB drivers always use async set_rx_mode since
some (mlx5) are now required to use it due to locking changes
Previous releases - regressions:
- udp: fix UDP length on last GSO_PARTIAL segment
- af_unix: fix UAF read of tail->len in unix_stream_data_wait()
- tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
- mlx5e: fix unlocked writing to ICOSQ, breaking AF_XDP
Previous releases - always broken:
- tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
- ipv4: raw: reject IP_HDRINCL packets with ihl < 5
- Bluetooth: a lot of locking and concurrency fixes (as always)
- batman-adv (mesh wireless networking): a lot of random fixes for
issues reported by security researchers and Sashiko
- netfilter: same thing, a lot of small security-ish fixes all over
the place, nothing really stands out
Misc:
- bring back the old 3c509 driver, Maciej wants to maintain it"
* tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (187 commits)
net: enetc: avoid VF->PF mailbox timeout during SR-IOV teardown
net: enetc: fix init and teardown order to prevent use of unsafe resources
net: enetc: fix unbounded loop and interrupt handling in VF-to-PF messaging
net: enetc: fix DMA write to freed memory in enetc_msg_free_mbx()
net: enetc: fix race condition in VF MAC address configuration
net: enetc: fix TOCTOU race and validate VF MAC address
net: enetc: add ratelimiting to VF mailbox error messages
net: enetc: fix missing error code when pf->vf_state allocation fails
net: enetc: fix incorrect mailbox message status returned to VFs
net: bridge: prevent too big nested attributes in br_fill_linkxstats()
l2tp: use list_del_rcu in l2tp_session_unhash
net: bcmgenet: keep RBUF EEE/PM disabled
ethernet: 3c509: Fix most coding style issues
ethernet: 3c509: Update documentation to match MAINTAINERS
ethernet: 3c509: Add GPL 2.0 SPDX license identifier
ethernet: 3c509: Fix AUI transceiver type selection
Revert "drivers: net: 3com: 3c509: Remove this driver"
tools: ynl: support listening on all nsids
net: gro: don't merge zcopy skbs
pds_core: ensure null-termination for firmware version strings
...
setup where many RBD devices are frequently mapped and unmapped, marked
for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmoPOcUTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi6yvB/9+hm+IHQK1gib4gCHOPgq9cD1gj7j8
oegjSmO0tIn3nP1K6wqQfTFnYkE6F37+dRqZTXOUjzi3NlefNJDnxwt9fymp2Y6S
DEobTnRgXSKMxJQ4+cu7jphgbJC/OKYZ+fxJRrKI4hlgZOfQwpvUfQczZZgjWJRz
WqJnSKLoF2k6JDgvokcmt1nyyQ7TrpPRB+6Jz2ATRtG0oxEzp1EN++FtiaRzn1mx
e0WgCBZV/AEFey2YG+Zyhrrg+1nUDWrZI3NgIZz5Q5WU4q/8zF7S9qbNeBQVdzKJ
aZFLxOdQvuRGbLs+g8f6dOMMlDSLnKl2rN2AAzcfwXcmmSQILqLH+ycp
=+cb7
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-7.1-rc5' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for an 'rbd unmap' race condition which popped up on a
production setup where many RBD devices are frequently mapped and
unmapped, marked for stable"
* tag 'ceph-for-7.1-rc5' of https://github.com/ceph/ceph-client:
rbd: eliminate a race in lock_dwork draining on unmap
- Fix reporting MISSED EVENTS in trace iterator
When the "trace" file is read with tracing enabled, if the writer
were to pass the iterator reader, it resets, sets a "missed_events"
flag and continues. The tracing output checks for missed events and
if there are some, it prints out "[LOST EVENTS]" to let the user
know events were dropped.
But the clearing of the missed_events happened when the tracing system
queried the ring buffer iterator about missed events. This was premature
as the ring buffer is per CPU, and the tracing code reads all the
CPU buffers and checks for missed events when it is read. If the
CPU iterator that had missed events isn't printed next, the output
for the LOST EVENTS is lost.
Clear the missed_events flag when the iterator moves to the next event
and not when the missed_events flag is queried. Also clear it on reset.
- Flush and stop the persistent ring buffer on panic
On panic the persistent ring buffer is used to debug what caused the
panic. But on some architectures, it requires flushing the memory
from cache, otherwise, the ring buffer persistent memory may not have
the last events and this could also cause the ring buffer to be
corrupted on the next boot.
- Fix nr_subbufs initialization in simple_ring_buffer_init_mm
The remote simple ring buffer meta data nr_subbufs is initialized
too early and gets cleared later on, making it zero and not reflect
the actual number of sub-buffers.
- Fix unload_page for simple_ring_buffer init rollback
On error, the pages loaded need to be unloaded. To unload a page
it is expected that: page = load_page(va); -> unload_page(page).
But the code was doing: unload_page(va) and not unload_page(page).
- Create output file from cmd_check_undefined
The check for undefined symbols checks if the file *.o.checked exists
and if so it skips doing the work. But the *.o.checked file never
was created making every build do the work even when it was already
done previously.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCag8l7BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qga3AQDkyh7V4T+fxY5gc5jSKVx5U9bRAMpJ
3GWGNCY9TGUyewEApUNO5MVGvXttyc1ONPHuBcShynj3resJk90sk491kw0=
=aY8d
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fixes from Steven Rostedt:
- Fix reporting MISSED EVENTS in trace iterator
When the "trace" file is read with tracing enabled, if the writer
were to pass the iterator reader, it resets, sets a "missed_events"
flag and continues. The tracing output checks for missed events and
if there are some, it prints out "[LOST EVENTS]" to let the user know
events were dropped.
But the clearing of the missed_events happened when the tracing
system queried the ring buffer iterator about missed events. This was
premature as the ring buffer is per CPU, and the tracing code reads
all the CPU buffers and checks for missed events when it is read. If
the CPU iterator that had missed events isn't printed next, the
output for the LOST EVENTS is lost.
Clear the missed_events flag when the iterator moves to the next
event and not when the missed_events flag is queried. Also clear it
on reset.
- Flush and stop the persistent ring buffer on panic
On panic the persistent ring buffer is used to debug what caused the
panic. But on some architectures, it requires flushing the memory
from cache, otherwise, the ring buffer persistent memory may not have
the last events and this could also cause the ring buffer to be
corrupted on the next boot.
- Fix nr_subbufs initialization in simple_ring_buffer_init_mm
The remote simple ring buffer meta data nr_subbufs is initialized too
early and gets cleared later on, making it zero and not reflect the
actual number of sub-buffers.
- Fix unload_page for simple_ring_buffer init rollback
On error, the pages loaded need to be unloaded. To unload a page it
is expected that: page = load_page(va); -> unload_page(page). But the
code was doing: unload_page(va) and not unload_page(page).
- Create output file from cmd_check_undefined
The check for undefined symbols checks if the file *.o.checked exists
and if so it skips doing the work. But the *.o.checked file never was
created making every build do the work even when it was already done
previously.
* tag 'trace-ringbuffer-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Create output file from cmd_check_undefined
tracing: Fix unload_page for simple_ring_buffer init rollback
tracing: Fix nr_subbufs initialization in simple_ring_buffer_init_mm()
ring-buffer: Flush and stop persistent ring buffer on panic
ring-buffer: Fix reporting of missed events in iterator
- cfg80211/mac80211:
- various security(-ish) fixes
- fix A-MSDU subframe handling
- fix multi-link element parsing
- ath10: avoid sending commands to dead device
- ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
- ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
- iwlwifi:
- fix TSO segmentation explosion
- don't TX to dead device
- fix warning in WoWLAN
- fix TX rates on old devices
- disconnect on beacon loss only if also no other traffic
- fill NULL-ptr deref
- fix STEP_URM hardware access
-----BEGIN PGP SIGNATURE-----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=vzwG
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a few more updates:
- cfg80211/mac80211:
- various security(-ish) fixes
- fix A-MSDU subframe handling
- fix multi-link element parsing
- ath10: avoid sending commands to dead device
- ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
- ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
- iwlwifi:
- fix TSO segmentation explosion
- don't TX to dead device
- fix warning in WoWLAN
- fix TX rates on old devices
- disconnect on beacon loss only if also no other traffic
- fill NULL-ptr deref
- fix STEP_URM hardware access
* tag 'wireless-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (24 commits)
wifi: cfg80211: wext: validate chandef in monitor mode
wifi: mac80211: consume only present negotiated TTLM maps
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
wifi: mac80211: fix multi-link element inheritance
wifi: mac80211: fix MLE defragmentation
wifi: mac80211: don't override max_amsdu_subframes
wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs
wifi: ath12k: fix EHT TX MCS limitation due to wrong 20 MHz-only parsing
wifi: ath11k: clear shared SRNG pointer state on restart
wifi: ath11k: fix use after free in ath11k_dp_rx_msdu_coalesce()
wifi: ath11k: fix peer resolution on rx path when peer_id=0
wifi: iwlwifi: mld: disconnect only after 6 beacons without Rx
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o BSS vif
wifi: iwlwifi: use correct function to read STEP_URM register
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
wifi: iwlwifi: mld: stop TX during firmware restart
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
wifi: ath10k: skip WMI and beacon transmission when device is wedged
...
====================
Link: https://patch.msgid.link/20260521152903.374070-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang says:
====================
net: enetc: SR-IOV robustness and security fixes
This patch series addresses a number of robustness, security, and
correctness issues in the ENETC driver's SR-IOV subsystem, focusing
primarily on the VF-to-PF mailbox communication path.
The series can be grouped into the following categories:
1. DoS and security fixes:
- Prevent an unbounded loop DoS in the VF-to-PF message handler,
which could be triggered by a malicious or misbehaving VF.
- Fix a TOCTOU (Time-of-Check-Time-of-Use) race and add proper
validation of VF MAC addresses to prevent spoofing or invalid
configuration from being applied.
2. Race condition fixes:
- Fix a race condition in VF MAC address configuration that could
lead to inconsistent state between the VF request and PF
application.
- Fix a race condition during SR-IOV teardown that could cause
VF->PF mailbox operations to time out, resulting in unnecessary
errors during shutdown.
3. Memory safety fixes:
- Fix a DMA write to freed memory in enetc_msg_free_mbx(), which
could cause silent memory corruption or system instability.
4. Error handling and initialization fixes:
- Fix missing error code propagation when pf->vf_state allocation
fails, ensuring callers receive a proper errno instead of
succeeding silently.
- Fix incorrect mailbox message status values returned to VFs,
which could cause VFs to misinterpret PF responses.
- Fix initialization order to prevent the use of uninitialized
resources during driver probe, which could cause undefined
behavior on certain configurations.
5. Diagnostics improvement:
- Add rate limiting to VF mailbox error messages to prevent log
flooding in the presence of a misbehaving VF.
These fixes improve the overall stability and security of the ENETC
SR-IOV implementation, particularly in multi-tenant environments where
VFs may be assigned to untrusted guests.
====================
Link: https://patch.msgid.link/20260520064421.91569-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During SR-IOV teardown, enetc_msg_psi_free() disables the MR interrupt
before pci_disable_sriov() removes the VFs. If a VF sends a mailbox
message during this window, the PF cannot receive it, causing the VF to
timeout waiting for a reply.
Since the timeout occurs during SR-IOV teardown when the VF is about to
be removed anyway, it has no functional impact on operation. However,
more messages will be added in the future, some visible error logs may
confuse users. So fix it by calling pci_disable_sriov() first to remove
all VFs, then safely clean up the mailbox resources. This eliminates the
race window where VFs could send messages to an unresponsive PF.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-10-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported a potential issue in enetc_msg_psi_init() where the IRQ
handler is registered before DMA resources are fully initialized [1].
The current initialization sequence is:
1. request_irq(enetc_msg_psi_msix) <- IRQ handler registered
2. INIT_WORK(&pf->msg_task, ...) <- work_struct initialized
3. enetc_msg_alloc_mbx() <- mailbox DMA allocated
This ordering is unsafe because if a spurious interrupt or pending
interrupt from a previous device state fires immediately after
request_irq() returns, the registered ISR enetc_msg_psi_msix() will
execute and unconditionally call:
schedule_work(&pf->msg_task)
At this point, pf->msg_task has not been initialized by INIT_WORK(), so
the work_struct contains garbage values in its internal linked list
pointers (work_struct->entry). Passing an uninitialized work_struct to
schedule_work() could corrupt the kernel's workqueue linked lists,
potentially leading to:
- Kernel panic in __queue_work()
- Memory corruption in workqueue data structures
- System deadlock or undefined behavior
Additionally, even if the work_struct was initialized, the mailbox DMA
buffers (pf->rxmsg[]) may not yet be allocated when the work handler
enetc_msg_task() runs, resulting in NULL pointer dereference.
Fix by reordering the initialization sequence to ensure all resources are
properly initialized before the interrupt handler can execute:
1. enetc_msg_alloc_mbx() <- Allocate all mailboxes
2. INIT_WORK(&pf->msg_task, ...) <- Initialize work first
3. request_irq(enetc_msg_psi_msix) <- Register IRQ last
4. Configure hardware & enable MR interrupts
This guarantees that when enetc_msg_psi_msix() runs:
- pf->msg_task is properly initialized (safe for schedule_work)
- pf->rxmsg[] buffers are allocated (safe for work handler access)
- Hardware is configured appropriately
As the inverse of enetc_msg_psi_init(), enetc_msg_psi_free() also has
similar problems. For example, if a pending interrupt fires between
enetc_msg_free_mbx() and free_irq(), the ISR enetc_msg_psi_msix() may
schedule the work handler again via schedule_work(), which could then
access already-freed DMA buffers (pf->rxmsg[]), leading to use-after-free
and potential memory corruption.
Therefore, the order of enetc_msg_psi_free() is adjusted:
1. enetc_msg_disable_mr_int() <- Stop new interrupts first
2. free_irq() <- Ensure no IRQ handler can run
3. cancel_work_sync() <- Wait for any pending work
4. enetc_msg_disable_mr_int() <- Re-disable in case work
re-enabled it
5. enetc_msg_free_mbx() <- Safe to free DMA buffers now
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enetc_msg_task() function has several issues that need to be addressed:
1. Unbounded loop causing potential DoS:
enetc_msg_task() processes VF-to-PF mailbox messages in an unbounded
for(;;) loop that keeps polling ENETC_PSIMSGRR until no MR bits are set.
A malicious guest VM can exploit this by continuously sending messages at
a high rate - immediately sending a new message as soon as the PF
acknowledges the previous one. Since the worker thread never yields or
enforces a processing budget, the mr_mask check frequently evaluates to
non-zero, causing the PF to spin indefinitely and starving other tasks.
Fix this by replacing the unbounded loop with a single snapshot read at
task entry. The task processes only the VFs whose MR bits were set at
that point, then re-enables message interrupts before returning. This
bounds work per invocation to at most num_vfs iterations. No messages are
lost because the message interrupt is disabled in enetc_msg_psi_msix()
before scheduling enetc_msg_task(), so any new messages arriving during
processing will trigger a fresh interrupt once re-enabled, scheduling
another task invocation.
2. Write order of ENETC_PSIIDR and ENETC_PSIMSGRR:
Both ENETC_PSIIDR and ENETC_PSIMSGRR contain MR bits indicating messages
have been received from VSIs, but only ENETC_PSIIDR trigger the CPU
interrupt. Previously, ENETC_PSIMSGRR was written before ENETC_PSIIDR.
Writing ENETC_PSIMSGRR returns the message code to the VSI in its upper
16 bits, signaling to the VF that message processing is complete and it
may send the next message. If the VF sends a new message before
ENETC_PSIIDR is written, the subsequent w1c write to ENETC_PSIIDR would
inadvertently clear the MR bit set by the new message, causing the
interrupt to be lost and the new message to go unprocessed.
Therefore, write ENETC_PSIIDR first to clear the interrupt source, then
write ENETC_PSIMSGRR to acknowledge the message to the VSI.
3. Check both ENETC_PSIMSGRR and ENETC_PSIIDR for mr_status:
The write order change above introduces a potential race: if a VF sends
a new message in the window between the ENETC_PSIIDR w1c and the
ENETC_PSIMSGRR w1c, the ENETC_PSIMSGRR MR bit for the new message may
not be set. If mr_status was derived solely from ENETC_PSIMSGRR, this
message would never be detected despite ENETC_PSIIDR retaining its MR
bit, leading to an unacknowledged interrupt storm.
Fix this by computing mr_status as the union of both ENETC_PSIMSGRR and
ENETC_PSIIDR MR bits, ensuring all pending messages are detected
regardless of which register reflects the new message state.
Additionally, rename the per-register MR macros (ENETC_PSI*_MR_MASK,
ENETC_PSI*_MR) to register-agnostic names (ENETC_PSIMR_MASK,
ENETC_PSIMR_BIT) since the MR bit layout is shared across ENETC_PSIMSGRR,
ENETC_PSIIER, and ENETC_PSIIDR. Make the mask macro dynamic based on
the actual number of active VFs rather than hardcoded.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260520064421.91569-8-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The teardown sequence in enetc_msg_psi_free() frees the DMA buffer before
clearing the device's DMA address registers. If a VF sends a message or a
pending DMA transfer completes within this window, the hardware will
perform a DMA write into the kernel memory that has already been returned
to the allocator.
The result is silent memory corruption that can affect arbitrary kernel
data structures. Therefore, clear the DMA address registers before the
DMA buffer is freed.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-7-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported a potential race condition between the VF message
handler and administrative VF MAC configuration from the host [1].
The VF message handler (enetc_msg_pf_set_vf_primary_mac_addr) runs
asynchronously in a workqueue context and accesses vf_state->flags
without any locking. Concurrently, the host can administratively
change the VF MAC address via enetc_pf_set_vf_mac(), which executes
under RTNL lock and modifies both vf_state->flags and hardware
registers.
This creates two race windows:
1) TOCTOU race on vf_state->flags: The check of ENETC_VF_FLAG_PF_SET_MAC
and subsequent MAC programming are not atomic, allowing the flag state
to change between check and use.
2) Torn MAC address writes: Hardware MAC programming requires multiple
non-atomic register writes (__raw_writel for lower 32 bits and
__raw_writew for upper 16 bits). Concurrent updates from VF mailbox
and PF admin paths can interleave these operations, resulting in a
corrupted MAC address being programmed into the hardware.
Fix by introducing a per-VF mutex to serialize access to vf_state and
hardware MAC register updates. Both enetc_pf_set_vf_mac() and
enetc_msg_pf_set_vf_primary_mac_addr() now acquire this lock before
accessing vf_state->flags or programming the MAC address, ensuring
atomic read-modify-write sequences and preventing register write
interleaving.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported that the PF driver accepts arbitrary MAC address from
from VF mailbox messages without proper validation, creating a security
vulnerability [1].
In enetc_msg_pf_set_vf_primary_mac_addr(), the MAC address is extracted
directly from the message buffer (cmd->mac.sa_data) and programmed into
hardware via pf->ops->set_si_primary_mac() without any validity checks.
A malicious VF can configure a multicast, broadcast, or all-zero MAC
address. Therefore, a validation to check the MAC address provided by VF
is required.
However, simply checking the MAC address is not enough, because it also
has the potential TOCTOU race [2]: The code reads the MAC address from
the DMA buffer to validate it via is_valid_ether_addr(), if validation
passes, reads the same DMA buffer a second time when calling
enetc_pf_set_primary_mac_addr() to program the hardware. A malicious VF
can exploit this window by overwriting the MAC address in the DMA buffer
between the validation check and the hardware programming, bypassing the
validation entirely.
Therefore, allocate a local buffer in enetc_msg_handle_rxmsg() and copy
the message content from the DMA buffer via memcpy() before processing.
This ensures the PF operates on a stable snapshot that the VF cannot
modify.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Link: https://sashiko.dev/#/patchset/20260513103021.2190593-1-wei.fang%40nxp.com#2
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported that a buggy or malicious guest VM can flood the host
kernel log by repeatedly sending VF-to-PF messages at a high rate,
degrading host performance and hiding important system logs [1].
Fix by replacing dev_err()/dev_warn() with dev_err_ratelimited(),
limiting output to the default kernel ratelimit. This ensures errors are
still logged for debugging while preventing log flooding attacks.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In enetc_pf_probe(), when the memory allocation for pf->vf_state fails,
the code jumps to the error handling label but the variable 'err' is not
assigned an appropriate error code beforehand. This causes the function
to return 0 (success) on an allocation failure path, misleading the
caller into thinking the probe succeeded. So set err to -ENOMEM before
jumping to the error handling label when the allocation for pf->vf_state
returns NULL.
Fixes: e15c5506dd ("net: enetc: allocate vf_state during PF probes")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two cases where VFs receive an incorrect success status from
the PF mailbox message handler, misleading them into believing their
requests have been fulfilled:
In enetc_msg_handle_rxmsg(), *status is pre-initialized to
ENETC_MSG_CMD_STATUS_OK. When an unsupported command type is received,
the default case only logs an error without updating *status, so it
remains as ENETC_MSG_CMD_STATUS_OK.
In enetc_msg_pf_set_vf_primary_mac_addr(), when the PF has already
assigned a MAC address for the VF (ENETC_VF_FLAG_PF_SET_MAC is set),
the function rejects the request but returns ENETC_MSG_CMD_STATUS_OK
instead of ENETC_MSG_CMD_STATUS_FAIL.
Therefore, correct the status value for the two cases mentioned above.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An unprivileged local user can pin a host CPU indefinitely in
l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on
L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and
L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take
GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace
suffices; on any host that has l2tp_core loaded the trigger is
reachable from a standard `unshare -Urn` sandbox.
l2tp_session_unhash() removes a session from tunnel->session_list
with list_del_init(), but that list is walked by
l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under
rcu_read_lock_bh(). list_del_init() leaves the deleted entry's
next/prev self-pointing; a reader that has loaded the entry and
then advances pos->list.next reads &session->list, container_of()s
back to the same session, and list_for_each_entry_rcu() never
reaches the list head. The CPU stays in strcmp() inside the
walker, with BH and preemption disabled, so RCU grace periods on
the host stall behind it and the wedged thread cannot be killed
(SIGKILL is delivered on syscall return).
Use list_del_rcu() to match the existing list_add_rcu() in
l2tp_session_register(); the deleted session remains visible to
in-flight walkers with consistent next/prev pointers until
kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list
has exactly one list_del_init() call site; the list_del_init
(&session->clist) at l2tp_core.c:533 operates on the per-collision
list, which is not walked under RCU. list_empty(&session->list) is
not used anywhere in net/l2tp/ after the unhash point, so dropping
the post-delete self-init is safe; the fix has no userspace-visible
behavior change.
Fixes: 89b768ec2d ("l2tp: use rcu list add/del when updating lists")
Cc: stable@vger.kernel.org # 6.11+
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260518183447.64078-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
