Add TDP data for laptop model FA401EA.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model G614FR.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model FX607VU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The mini-LED current_value attribute does not work on devices that use
ASUS_WMI_DEVID_MINI_LED_MODE2 (2024 and newer models).
Reading is broken: mini_led_mode_current_value_show() fetches the mode
from the device but then decodes a literal 0 instead of the value it
just read:
mode = FIELD_GET(ASUS_MINI_LED_MODE_MASK, 0);
So mode is always 0, and the attribute always reports the same thing
regardless of the real hardware state.
Writing is broken too. The number a user writes is an index; the value
the firmware actually wants is looked up from that index in
mini_led_mode_map[]. mini_led_mode_current_value_store() skips that
lookup and passes the raw index straight to armoury_attr_uint_store().
On 2024 devices the firmware numbers its modes differently from the
index, so some writes are rejected with -EINVAL and the rest send the
wrong mode to the hardware.
Fix both paths: decode the value actually read from the device when
reading, and look up the firmware value before sending it when
writing. Older (MODE1) devices were unaffected because there the index
and the firmware value are the same.
Fixes: f99eb09809 ("platform/x86: asus-armoury: move existing tunings to asus-armoury module")
Signed-off-by: Ahmed Yaseen <yaseen@ghoul.dev>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517182957.11069-1-yaseen@ghoul.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After a PCIe Uncorrectable Error has been reported by a device with
Intel Vendor Specific Extended Capabilities and has been recovered
through a Secondary Bus Reset, its driver calls intel_vsec_pci_probe()
to rescan and reinitialize VSECs.
intel_vsec_pci_probe() invokes pcim_enable_device() and thereby adds
another devm action which calls pcim_disable_device() on driver unbind.
So once the driver unbinds, pcim_disable_device() will be called as many
times as an Uncorrectable Error occurred, plus one. This will lead to
an enable_cnt imbalance on driver unbind.
Additionally, since commit dc957ab6aa ("platform/x86/intel/vsec: Add
private data for per-device data"), a devm_kzalloc() allocation is
leaked on every Uncorrectable Error.
Avoid by splitting the VSEC rescan out of intel_vsec_pci_probe() into a
separate helper and calling that on PCIe error recovery.
Fixes: 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
Link: https://patch.msgid.link/bd594d09fa866dc51dddc9a447c3b23f9b1402cc.1778736835.git.lukas@wunner.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It seems that on some older models (~2020) the battery charging limit
can permanently damage the battery. Prevent users from enabling this
feature thru the "force" module parameter to avoid causing permanent
hardware damage on such devices.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Link: https://www.reddit.com/r/XMG_gg/comments/ld9yyf/battery_limit_hidden_function_discovered_on/
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-5-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Users might want to force-enable all possible features even on
machines with a valid device descriptor. Until now the "force"
module param was ignored on such machines. Fix this to make
it easier to test for support of new features.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-4-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The power supply sysfs ABI states that:
Not all hardware is capable of setting this to an arbitrary
percentage. Drivers will round written values to the nearest
supported value. Reading back the value will show the actual
threshold set by the driver.
The driver currently violates this ABI by rejecting a charging
threshold of 0. Fix this by clamping this value to 1.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-3-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The EC might initialize the charge threshold with 0 to signal that
said threshold is uninitialized. Detect this and replace said value
with 100 to signal the EC that we want to take control of battery
charging. Also set the threshold to 100 if the EC-provided value
is invalid.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
surfacepro3_button driver.
Fixes: d913a5a12b ("platform/surface: surfacepro3_button: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/23119222.EfDdHjke4D@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel-vbtn driver.
Fixes: 26173179fa ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3426431.aeNJFYEL58@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel_sar driver.
Fixes: dcfbd31ef4 ("platform/x86: BIOS SAR driver for Intel M.2 Modem")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/14023870.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel-hid driver.
Fixes: ecc83e52b2 ("intel-hid: new hid event driver for hotkeys")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/1971512.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 hp_accel driver.
Fixes: 8ebcb6c94c ("platform/x86: hp_accel: Convert to be a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2425918.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 adv_swbutton driver.
Fixes: 3d904005f6 ("platform/x86: add support for Advantech software defined button")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/5115425.31r3eYUQgx@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-c0xxx (board ID: 8902) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to the omen_v1_legacy_thermal_params quirk.
Testing on board 8902 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Signed-off-by: Konenko Andrey Viktorovich <admin@aquinas.su>
Link: https://patch.msgid.link/T3DTKbKwQzOgk_0eUG-kMg@aquinas.su
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Surface Laptop 7 exposes battery and AC status via Qualcomm PMIC GLINK
qcom_battmgr. Registering the standard SSAM battery and AC client
devices on this platform causes duplicate power-supply devices to
appear.
Drop the SSAM battery and AC nodes from the Surface Laptop 7 registry
group so that only the qcom_battmgr power supplies are instantiated.
Fixes: b27622f131 ("platform/surface: Add OF support")
Signed-off-by: Oliver White <oliverjwhite07@gmail.com>
Link: https://patch.msgid.link/20260409034347.17381-1-oliverjwhite07@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use the existing zenbook duo keyboard quirk for the UX8407AA model too.
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260508070956.62201-1-p.pisati@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds lwmi_is_attr_01_supported, and only creates the attribute subfolder
if the attribute is supported by the hardware. Due to some poorly
implemented BIOS this is a multi-step sequence of events. This is
because:
- Some BIOS support getting the capability data from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS support get/set for the current value from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS report capability data for a method that is not fully
implemented.
- Some BIOS have methods fully implemented, but no complimentary
capability data.
To ensure we only expose fully implemented methods with corresponding
capability data, we check each outcome before reporting that an
attribute can be supported.
Checking for lwmi_is_attr_01_supported during remove is not done to
ensure that we don't attempt to call cd01 or send WMI events if one of
the interfaces being removed was the cause of the driver unloading.
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Kurt Borja <kuurtb@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/DG60P3SHXR8H.3NSEHMZ6J7XRC@gmail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-10-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds lwmi_attr_id() function. In the same vein as LWMI_ATTR_ID_FAN_RPM(),
but as a generic, to de-duplicate attribute_id assignment boilerplate.
Adds tunable_attr_01_id() function that breaks out the members of a
tunable_attr_01 struct and passes them to lwmi_attr_id().
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-9-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In a later patch in the series the thermal mode enum will be accessed
across three separate drivers (wmi-capdata, wmi-gamezonem and wmi-other).
An additional patch in the series will also add a function prototype that
needs to reference this enum in wmi-helpers.h. To avoid having all these
drivers begin to import each others headers, and to avoid declaring an
opaque enum to hande the second case, move the thermal mode enum to
helpers where it can be safely accessed by everything that needs it from
a single import.
While at it, since the gamezone_events_type enum is the only remaining
item in the header, move that as well and remove the gamezone header
entirely.
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, lenovo-wmi-gamezone depends on lenovo-wmi-other as the former
imports symbols from the latter. The imported symbols are just used to
register a notifier block. However, there is no runtime dependency
between both drivers, and either of them can run without the other,
which is the major purpose of using the notifier framework.
Such a link-time dependency is non-optimal. A previous attempt to "fix"
it made LENOVO_WMI_GAMEZONE select LENOVO_WMI_TUNING, which was
fundamentally broken and resulted in undefined Kconfig behavior, as
`select' cannot be used on a symbol with potentially unmet dependencies.
Decouple both drivers by moving the thermal mode notifier chain to
lenovo-wmi-helpers. Methods for notifier block (un)registration are
exported for lenovo-wmi-gamezone, while a method for querying the
current thermal mode are exported for lenovo-wmi-other.
This turns the dependency graph from
+------------ lenovo-wmi-gamezone
| |
v |
lenovo-wmi-helpers |
^ |
| V
+------------ lenovo-wmi-other
into
+------------ lenovo-wmi-gamezone
|
v
lenovo-wmi-helpers
^
|
+------------ lenovo-wmi-other
To make it clear, the name of the notifier chain is also renamed from
`om_chain_head' to `tm_chain_head', indicating that it's used to query
the current thermal mode.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 6e38b9fcbf ("platform/x86: lenovo: gamezone needs "other mode"")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603252259.gHvJDyh3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202603260302.X0NjQOda-lkp@intel.com/
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In struct tunable_attr_01 the capdata pointer is unused and the size of
the id members is u32 when it should be u8. Fix these prior to adding
additional members.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds explicit initialization of wmi_method_args_32 declarations with
zero values to prevent uninitialized data from being sent to the device
BIOS when passed.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 22024ac536 ("platform/x86: Add Lenovo Gamezone WMI Driver")
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Rong Zhang <i@rong.moe>
Closes: https://lore.kernel.org/platform-driver-x86/95c7e7b539dd0af41189c754fcd35cec5b6fe182.camel@rong.moe/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When lwmi_om_master_bind() fails, the master device's components are
left bound, with the aggregate device destroyed due to the failure
(found by sashiko.dev [1]).
Balance calls to component_bind_all() and component_unbind_all() when an
error is propagated to the component framework.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-4-derekjohn.clark@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, the IDA id is only freed on wmi-other device removal or
failure to create firmware-attributes device, kset, or attributes. It
leaks IDA ids if the wmi-other device is bound multiple times, as the
unbind callback never frees the previously allocated IDA id.
Additionally, if the wmi-other device has failed to create a
firmware-attributes device before it gets removed, the wmi-device
removal callback double frees the same IDA id.
These bugs were found by sashiko.dev [1].
Fix them by moving ida_free() into lwmi_om_fw_attr_remove() so it is
balanced with ida_alloc() in lwmi_om_fw_attr_add(). With them fixed,
properly set and utilize the validity of priv->ida_id to balance
firmware-attributes registration and removal, without relying on
propagating the registration error to the component framework, which is
more reliable and aligns with the hwmon device registration and removal
sequences.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: e521d16e76 ("platform/x86: Add lenovo-wmi-helpers")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-2-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Victus 16-r0xxx (board ID: 8BC2) has the same WMI as other Victus
S boards, but requires quirks for correctly switching thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8BC2 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Signed-off-by: Haichen Feng <2806891994@qq.com>
Link: https://patch.msgid.link/tencent_8E29805D8DC7B6005244C3433C62DD9DF606@qq.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This driver faults when intel vsec driver is unbound from PCI driver
interface. For example:
echo 0000:00:03.1 > /sys/bus/pci/drivers/intel_vsec/unbind
This is caused by accessing plr->dbgfs_dir after vsec_tpmi driver is
removed. Here vsec_tpmi driver is the parent. On unbind, the parent
device remove callback is called first which here will remove debugfs
interface. Hence plr->dbgfs_dir is no longer valid.
Register notifier for TPMI_CORE_EXIT and make this pointer to NULL,
so that debugfs_remove_recursive() is not called with bad plr->dbgfs_dir
pointer.
After notifier is returned the vsec_tpmi driver will call remove debugfs
by calling debugfs_remove_recursive().
Fixes: 811f67c516 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In some cases a driver using services of vsec_tpmi driver requires some
processing before vsec_tpmi exits. For example a children using debugfs
can't use debugfs as this will be deleted by the vsec_tpmi driver.
This is the case when unbind using PCI driver interface. In this case
the remove callback of vsec_tpmi driver is called first, then remove
callback of its children.
Add support of blocking chain notifiers support. Notify on successful probe
and before clean up in the remove callback.
Fixes: 811f67c516 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It is possible that the driver handling device is enumerated before
registering debugfs. If the driver wants to access debugfs by calling
tpmi_get_debugfs_dir(), this will return error in this case.
Hence register debugfs before creating devices.
Fixes: 811f67c516 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On Samsung Galaxy Book 5 (SAM0430), the keyboard backlight, microphone
mute, and camera block hotkeys do not generate i8042 scancodes.
Instead they arrive as ACPI notifications 0x7d, 0x6e, and 0x6f
respectively, all of which previously fell through to the default
"unknown" warning in galaxybook_acpi_notify().
Add handling for these three events:
- 0x7d (Fn+F9, keyboard backlight): schedule the existing
kbd_backlight_hotkey_work which cycles brightness.
- 0x6e (Fn+F10, microphone mute): emit KEY_MICMUTE via the driver's
input device.
- 0x6f (Fn+F11, camera block): if block_recording is active use the
existing block_recording_hotkey_work; otherwise emit a toggle of
SW_CAMERA_LENS_COVER via the driver's input device on models where
the block_recording ACPI feature is not supported.
Tested on Samsung Galaxy Book 5 (SAM0430) and Samsung Galaxy Book2 Pro
(SAM0429).
Signed-off-by: Ayaan Mirza Baig <ayaanmirzabaig85@gmail.com>
Co-developed-by: Joshua Grisham <josh@joshuagrisham.com>
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Link: https://patch.msgid.link/20260418004613.93981-3-ayaanmirzabaig85@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename the camera_lens_cover_switch input device to a generic input
device which can be used for multiple input events. Move input device
allocation and registration into a dedicated galaxybook_input_init()
helper which is called early in probe so that the device is available
to all features.
No functional change.
Signed-off-by: Ayaan Mirza Baig <ayaanmirzabaig85@gmail.com>
Link: https://patch.msgid.link/20260418004613.93981-2-ayaanmirzabaig85@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When the flag relax_fan_constraint is set, local variable 'raw'
is never assigned, and lwmi_om_hwmon_write() will pass uninitialized
value to lwmi_om_fan_get_set() resulting in undefined behavior.
This flag allows user to bypass minimum fan RPM divisor rounding,
but assignment to 'raw' only happens in the non-relaxed path.
Fix by defaulting 'raw' to user provided 'val' in the else branch.
Fixes: 51ed34282f ("platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning")
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Yufei CHENG <cd345al@gmail.com>
Link: https://patch.msgid.link/20260426165034.9073-1-cd345al@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen Max 16-ah0xxx, DMI board ID 8D41 is currently marked with
victus_s_thermal_params in the victus_s_thermal_profile_boards[] list.
This disables thermal profile readback and adds a dmesg warning during
driver init for "unknown board".
After testing we know that (similar to another HP Omen Max 16 device,
board ID 8D87), the embedded controller on this board does not expose
thermal profile which means we have to intentionally disable EC
readback.
Changing its driver_data to omen_v1_no_ec_thermal_params is sufficient
to silence the warning.
Tested-by: Benjamin Y <hectare.plains1h@icloud.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260429180953.129885-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After calling wmidev_evaluate_method(), if the ACPI core does not return
an out object, then wmidev_invoke_method() bypasses the min_size check
and returns 0. Add a check for min_size if there is not an out object.
Fixes: 1aeded2f55 ("platform/wmi: Extend wmidev_query_block() to reject undersized data")
Closes: https://sashiko.dev/#/patchset/20260406203237.2970-1-W_Armin%40gmx.de
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260429-invoke-fix-v1-1-ce938eb80cd3@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----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=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----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=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode
-----BEGIN PGP SIGNATURE-----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=mY/t
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
mentioning separately: Rafael's commit converting tpm_crb from ACPI driver
to a platform driver. Starting from this release cycle, the branch with TPM
changes mirrored to next is 'for-next-tpm', and patches for keys have their
own separate 'for-next-keys' branch.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaezVbgAKCRAaerohdGur
0ggHAQDmhaZ2C3ddAV1WjfXh1YqdWAmqEqoP7ZHAh4OrjyRPTQD+Pc4xl9TSOgHx
/9WzzV6AM6fL5RuC2/PO5RvOKF9mswc=
=tpJM
-----END PGP SIGNATURE-----
Merge tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736a ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Several development updates for 7.1-rc1:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
-----BEGIN PGP SIGNATURE-----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=arB6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
