If input_register_device() fails, we call input_free_device(), but keep
stale pointer to the old device in hidpp->input, which could potentially
lead to UAF. Fix that by resetting it to NULL before returning from
hidpp_connect_event().
Reported-by: zdi-disclosures@trendmicro.com
Signed-off-by: Jiri Kosina <jkosina@suse.com>
On the Surface Pro 10 (Meteor Lake) the touchscreen stops working after a
suspend/resume cycle and only recovers after a reboot. The driver logs
"GET_DEVICE_INFO: recv failed: -11" on resume.
This platform suspends through s2idle: /sys/power/mem_sleep exposes
"[s2idle]" as the only state, there is no "deep"/S3 entry at all. The
touch IC nonetheless loses power across that s2idle suspend, the same
way it does across hibernation. quickspi_resume() only re-selects the
THC port, restores interrupts and DMA and sends a HIDSPI_ON command,
assuming the touch IC kept its power and state. When it has actually
lost power the HIDSPI_ON command is never acknowledged and the
descriptor read fails, leaving the touchscreen dead until the module is
reloaded.
quickspi_restore() already handles this for hibernation by
reconfiguring the THC SPI/LTR settings and running reset_tic() to
re-enumerate the device. Make quickspi_resume() do the same when the
device is not a wake source. A wake-enabled device keeps its power and
state across suspend, so it stays on the light restore path: resetting
it would discard a pending wake touch event and break wake-on-touch.
The non-wake path mirrors the existing quickspi_restore() sequence,
including enabling interrupts before reset_tic(), so it introduces no
new ordering relative to code already in the driver.
This change has been validated on a Surface Pro 10 running the
linux-surface kernel across multiple s2idle suspend/resume cycles; it
has not been tested on a mainline build.
Closes: https://github.com/linux-surface/linux-surface/issues/1799
Signed-off-by: Danny D. <d3z.the.dev@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Commit 0a3fe972a7 ("HID: core: Mitigate potential OOB by removing
bogus memset()"), added a check in hid_report_raw_event() to reject
reports if the received data size is smaller than expected. This was
intended to prevent OOB errors by no longer allowing zeroing-out of
shorter reports due to the lack of buffer size information.
However, this leads to regressions in hid_report_raw_event(), where
shorter than expected reports are rejected, even though their buffers
are sufficiently large to be zero-padded.
To solve this issue, Benjamin introduced a safer alternative in commit
206342541f ("HID: core: introduce hid_safe_input_report()"), which
forwards the buffer size and allows hid_report_raw_event() to safely
zero-pad the data.
Convert uhid to use hid_safe_input_report() and pass UHID_DATA_MAX as
the buffer size. This prevents the reported regressions [1], allowing
hid core to zero-pad the shorter reports safely as expected.
Cc: stable@vger.kernel.org
Fixes: 0a3fe972a7 ("HID: core: Mitigate potential OOB by removing bogus memset()")
Closes: https://lore.kernel.org/all/ahsh0UtTX6e0ZeHa@google.com/ [1]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Closes: https://lore.kernel.org/all/ahsh0UtTX6e0ZeHa@google.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack
buffer (tmp_buf), writing an 11-12 byte header followed by the
caller-supplied report data. The HID core caps report size at
HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set
hid_ll_driver.max_buffer_size and performs no bounds checking before
copying the payload:
memcpy(tmp_buf + tx_len, buf, len);
A hidraw SET_REPORT ioctl with a report larger than ~116 bytes
overflows the stack buffer.
Add a size check after constructing the header, rejecting reports that
would exceed the buffer capacity.
Discovered by Atuin - Automated Vulnerability Discovery Engine.
Fixes: 75e16c8ce2 ("HID: hid-goodix: Add Goodix HID-over-SPI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for the HORI Wireless Switch Pad (vendor 0x0f0d, product
0x00f6), a licensed third-party Nintendo Switch Pro Controller.
The controller reports controller type 0x06 (vs 0x03 for first-party
Pro Controllers) and has the following quirks:
- SPI flash calibration data is incompatible; use default stick
calibration values instead.
- X and Y button bits are swapped compared to first-party controllers;
add a dedicated button mapping table.
- Rumble and IMU enable may timeout (no vibration motor in hardware);
treat as non-fatal for licensed controllers.
Tested over Bluetooth on NixOS with kernel 7.0.5 and 7.0.10:
- All 14 buttons map correctly
- Player LED sets on connect
- Sticks report correctly with default calibration
- IMU/gyro data streams at 60Hz
- D-pad reports on ABS_HAT0X/HAT0Y
Device information:
Bluetooth name: Lic Pro Controller
Bluetooth HID: 0005:0F0D:00F6
Assisted-by: Kiro:Auto [Amazon Kiro IDE]
Signed-off-by: Hector Zelaya <hector@hectorzelaya.dev>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The INGENIC 17EF:6161 firmware on the Lenovo Yoga Book 9 14IAH10
does not clear stale contact slots when fingers are lifted. Each
HID report contains up to 10 finger slots, but only the first
ContactCount slots represent valid contacts; the remaining slots
retain TipSwitch=1 with positions from previous touches.
Raw HID capture confirms this: across a 60-second capture with
repeated multi-finger gestures, 90% of frames had more TipSwitch=1
slots than the reported ContactCount. The ContactCount field itself
is always accurate.
Add MT_QUIRK_CONTACT_CNT_ACCURATE to the MT_CLS_YOGABOOK9I class so
the driver stops processing slots once ContactCount valid contacts
have been consumed, discarding the stale ghost entries per HID
specification section 17. MT_QUIRK_NOT_SEEN_MEANS_UP (already in
the class) ensures that any slot skipped by this guard is released
via INPUT_MT_DROP_UNUSED at frame sync.
Signed-off-by: Dave Carey <carvsdriver@gmail.com>
Tested-by: Dave Carey <carvsdriver@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When updating an existing effect, the effect type from the last created
effect was sent to the device instead of the updated one.
This caused incorrect reports when a game creates multiple different
effects and updates only one that is not the last created.
Fixes FFB in multiple games that create multiple simultaneous effects
(Forza Horizon 5/6).
Fixes: 224ee88fe3 ("Input: add force feedback driver for PID devices")
Cc: stable@vger.kernel.org
Tested-by: Oliver Roundtree <oroundtree1@gmail.com>
Co-developed-by: Ryno Kotzé <lemon.xah@gmail.com>
Signed-off-by: Ryno Kotzé <lemon.xah@gmail.com>
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
wacom_parse_and_register() starts HID hardware before registering inputs
and initializing pad LEDs/remotes. Those later steps can fail, but their
error paths currently release Wacom resources without stopping the HID
hardware.
Route post-hid_hw_start() failures through hid_hw_stop() before
releasing driver resources.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code.
Fixes: c1d6708bf0 ("HID: wacom: Do not register input devices until after hid_hw_start")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The log level for short messages was changed from debug to warning,
flooding syslog on systems with devices that regularly send
short reports, in my case an UPS:
$ dmesg |grep -c 'Event data for report .* was too short'
35
Demote it back to debug level.
Fixes: 0a3fe972a7 ("HID: core: Mitigate potential OOB by removing bogus memset()")
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The X12 Tab Gen 2 emits KEY_PERFORMANCE via Fn+F8 through the raw
event handler but never declared the capability via
input_set_capability(). This prevents userspace tools from
discovering the key through evdev capability bits.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add USB ID support for the ThinkPad X13 detachable keyboard.
The Keyboard uses the same HID raw event protocol as the ThinkPad
X12 Gen 2. The functionality stays the same with X12 Gen 2 Keyboards.
Also declare KEY_PERFORMANCE capability in lenovo_input_configured()
for X13 detachable, allowing userspace to discover the key via evdev
capability bits.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
hid_go_cfg_probe() initialises drvdata.go_cfg_setup and schedules it
to run 2 ms later:
INIT_DELAYED_WORK(&drvdata.go_cfg_setup, &cfg_setup);
schedule_delayed_work(&drvdata.go_cfg_setup, msecs_to_jiffies(2));
cfg_setup() dereferences drvdata.hdev to issue MCU command requests.
hid_go_cfg_remove() tears down sysfs and stops the HID device, but
never drains the delayed work. If the device is unbound within the
2 ms scheduling delay (a probe failure rolling back via remove, or a
fast rmmod after probe), the work fires after hid_destroy_device()
has dropped its reference and released the underlying hdev struct,
leaving cfg_setup() with a stale drvdata.hdev pointer.
Mirror the sibling driver hid-lenovo-go-s.c, whose hid_gos_cfg_remove()
already calls cancel_delayed_work_sync() on its analogous work, and
drain go_cfg_setup at the top of hid_go_cfg_remove(). The cancel
must come before guard(mutex)(&drvdata.cfg_mutex) because cfg_setup()
acquires that mutex; reversing the order would deadlock.
Fixes: d69ccfcbc9 ("HID: hid-lenovo-go: Add Lenovo Legion Go Series HID Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Khadka <maskmemanish@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The batteries list (hdev->batteries) is not cleaned up during
hidinput_disconnect(), but struct hid_battery entries are allocated
with devm_kzalloc.
When a driver is unbound (e.g. during devicereprobe), devm frees those
entries while their list_head nodesremain dangling in hdev->batteries,
which persists across rebinds.
Link: https://lore.kernel.org/all/20260602011949.2825852-1-rafael@rcpassos.me/
Fixes: 4a58ae85c3 ("HID: input: Add support for multiple batteries per device")
Signed-off-by: Rafael Passos <rafael@rcpassos.me>
Acked-by: Lucas Zampieri <lcasmz54@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Use __free(kfree) cleanup facility for the temporary buffer in
wacom_wac_queue_flush() to simplify error paths and ensure the buffer
is freed automatically when it goes out of scope.
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
wacom_wac_queue_flush() is called via the .raw_event callback
(wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush).
For USB HID devices, this callback is invoked from hid_irq_in(), which
is a URB completion handler running in atomic context. Using GFP_KERNEL
in this path can sleep, leading to a "scheduling while atomic" bug.
Use GFP_ATOMIC instead. The existing code already handles allocation
failure by skipping the fifo entry and continuing.
Reported-by: Sashiko-bot <sashiko-bot@kernel.org>
Fixes: 5e013ad206 ("HID: wacom: Remove static WACOM_PKGLEN_MAX limit")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo
doesn't have enough space for the incoming report. If the kfifo is
empty, kfifo_skip() reads stale data left in the kmalloc'd buffer
via __kfifo_peek_n() and interprets it as a record length, advancing
fifo->out by that garbage value. This corrupts the internal kfifo
state, causing kfifo_unused() to return a value much larger than the
actual buffer size, which bypasses __kfifo_in_r()'s guard:
if (len + recsize > kfifo_unused(fifo))
return 0;
kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to
3842 bytes past the 256-byte buffer.
Add a !kfifo_is_empty() condition to the while loop so kfifo_skip()
is never called on an empty fifo, and check the return value of
kfifo_in() to reject reports that are too large for the fifo.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 5e013ad206 ("HID: wacom: Remove static WACOM_PKGLEN_MAX limit")
Cc: stable@vger.kernel.org
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Some tab characters snuck into the data layout table for turntable
extensions, which resulted in the table only looking right at a tabstop
of 4, which is uncommon in the kernel. Change them to the equivalent
amount of spaces, which should look correct in any editor.
While at it, also fix the other whitespace errors (trailing spaces at
end of line) introduced in the same commit.
Fixes: 05086f3db5 ("HID: wiimote: Add support for the DJ Hero turntable")
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pFq/
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2026052801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- buffer overflow fix for lenovo (Kean) and wacom (Lee Jones) drivers
- segfaults prevention in lenovo-go driver when used with an emulated
device (Louis Clinckx)
- cleanup of resources in u2fzero (Myeonghun Pak)
- a quirk for a USB mouse and a cleanup in hid.h (hlleng and Liu Kai)
* tag 'hid-for-linus-2026052801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: Fix OOB write in wacom_hid_set_device_mode()
HID: lenovo-go: drop dead NULL check on to_usb_interface()
HID: lenovo-go: reject non-USB transports in probe
HID: lenovo: Fix buffer over-read and unaligned access in X12 Tab raw_event handler
HID: quirks: Add ALWAYS_POLL quirk for SIGMACHIP USB mouse
HID: remove duplicate hid_warn_ratelimited definition
HID: u2fzero: free allocated URB on probe errors
Fix three issues in the ACPI button driver: a possible crash due to
a button press after unloading the driver (introduced during the 6.15
development cycle), function keys breakage on Toshiba Tecra X40 due to
missing ACPI events (introduced during the 7.0 development cycle), and
a missing probe rollback path item that has not been added by mistake
during a recent update.
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmoYhl8SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1mfsH/A4/8aBIuxemIAoyoAQwwjQGoIkdhDDV
vyHBpOxzXwlOB0dCi/vuVdkMX+ADt2/0roh82mnXRiIv47CF/ePrQSnLiIvtN32b
cY7xbSN8n7d2Vjp5k3cWBU/CL1tCGq6c/DEnFzMwtzhkt7qCuaDDfedqjg1/dZvg
IrbexlAveRO9Qhtep8wCrxJsmZULXFcQe2qSMS82UkbqeJzR4lz3ovLocdEQqP9Q
YRipKrv4M5/3H63ajbxJQZaP87WY731tM4Ny2zxO05dek9b70o+dHyjRGMRqqYZD
eTKo8ck90aLNsjiXXC6eqVOkcxZv3kbLkpY4Exblmmp0lBnzszhRe0w=
=Th+J
-----END PGP SIGNATURE-----
Merge tag 'acpi-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"Fix three issues in the ACPI button driver: a possible crash due to a
button press after unloading the driver (introduced during the 6.15
development cycle), function keys breakage on Toshiba Tecra X40 due to
missing ACPI events (introduced during the 7.0 development cycle), and
a missing probe rollback path item that has not been added by mistake
during a recent update"
* tag 'acpi-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: button: Add missing device class clearing on probe failures
ACPI: button: Enable wakeup GPEs for ACPI buttons at probe time
ACPI: button: Fix ACPI GPE handler leak during removal
Fix a possible amd-pstate-ut cpufreq driver crash introduced by
a recent update (K Prateek Nayak)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmoYhVgSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1mRIIAJhyAd7iABFrh2uHIGQjF4wb4BfRQ/Sk
bStrkwQf4mqTQ8QCIzz7cS882VytJvvMtgUm/0KjedfwV4ZHtJbu1YKuAzKyKxVH
dz7wYpUKXmhoQnPjij3xG5UK++khq14PyUKKyHGiUAtJmnhvEaWu07kh5K2pC51y
uuJ9z6v+JXiu0m2H/nXtEAkzwnWwqdGSl16f0hFUGJlKeMeA6MStP/vZVomo7hiX
G6mYJVS2eYMhjcpetm055X6zMg5IgHdYVhGOlC6G+HPB6/zs5/VZUfhibmfzi1cj
yolk8WbjoQDwVXStYofI6YFFv/Bw+B6mblYGb0HwQcUec58taARMSmY=
=Ha7c
-----END PGP SIGNATURE-----
Merge tag 'pm-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a possible amd-pstate-ut cpufreq driver crash introduced by a
recent update (K Prateek Nayak)"
* tag 'pm-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/amd-pstate-ut: Disable dynamic_epp after the mode switch
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth: vti: use ip6_tnl.net in vti6_changelink().
- eth: vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=IBwj
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again significantly bigger than the same point into the
previous cycle, but at least smaller than last week.
I'm not aware of any pending regression for the current cycle.
Including fixes from netfilter.
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth:
- vti: use ip6_tnl.net in vti6_changelink().
- vxlan: do not reuse cached ip_hdr() value after
skb_tunnel_check_pmtu()"
* tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
dpll: zl3073x: make frequency monitor a per-device attribute
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
dpll: export __dpll_device_change_ntf() for use under dpll_lock
net/handshake: Drain pending requests at net namespace exit
net/handshake: Verify file-reference balance in submit paths
net/handshake: Close the submit-side sock_hold race
net/handshake: hand off the pinned file reference to accept_doit
net/handshake: Take a long-lived file reference at submit
net/handshake: Pass negative errno through handshake_complete()
nvme-tcp: store negative errno in queue->tls_err
net/handshake: Use spin_lock_bh for hn_lock
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
net: hibmcge: move dma_rmb() after dma_sync_single_for_cpu() in RX path
net: hibmcge: disable Relaxed Ordering to fix RX packet corruption
selftests/tc-testing: Add netem test case exercising loops
selftests/tc-testing: Add mirred test cases exercising loops
net/sched: act_mirred: Fix return code in early mirred redirect error paths
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
net/sched: fix packet loop on netem when duplicate is on
...
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for.
Reported-by: Nicholas Carlini <npc@anthropic.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris James Morris <jmorris@namei.org>
Cc: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE
usage is always located in the first field (field[0]) of the feature report.
However, a device can specify HID_DG_INPUTMODE in a different field.
If HID_DG_INPUTMODE is in a field other than the first one and the first
field has a report_count smaller than the usage_index of HID_DG_INPUTMODE,
this leads to an out-of-bounds write to r->field[0]->value.
Fix this by storing the field index of HID_DG_INPUTMODE in 'struct
hid_data' during feature mapping. In wacom_hid_set_device_mode(), use
this stored field index to access the correct field and add bounds
checks to ensure both the field index and the value index are within
valid ranges before writing.
Cc: stable@vger.kernel.org
Fixes: 5ae6e89f74 ("HID: wacom: implement the finger part of the HID generic handling")
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Address several teardown issues and resource leaks in the driver's remove
path and error handling:
1. Debounce clock reference leak: The debounce clock (bank->db_clk) is
obtained using of_clk_get() which increments the clock's reference
count, but clk_put() is never called. Register a devm action to
cleanly release it on unbind. Note that of_clk_get(..., 1) remains
necessary over devm_clk_get() because the DT binding does not define
clock-names, precluding name-based lookup.
2. Unregistered chained IRQ handler: The chained IRQ handler is not
disconnected in remove(). If a stray interrupt fires after the driver
is removed, the kernel attempts to execute a stale handler, leading
to a panic. Fix this by clearing the handler in remove().
3. IRQ domain leak: The linear IRQ domain and its generic chips are
allocated manually during probe but never removed. Remove the IRQ
domain during driver teardown to free the associated generic chips
and mappings.
Fixes: 936ee2675e ("gpio/rockchip: add driver for rockchip gpio")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Link: https://patch.msgid.link/20260526171050.12785-3-scardracs@disroot.org
[Bartosz: don't emit an error message on devres allocation failure]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The bank->clk was previously obtained via of_clk_get() and manually
prepared/enabled. However, it was missing a corresponding clk_put() in
both the error paths and the remove function, leading to a reference leak.
Convert the allocation to devm_clk_get_enabled(), which also properly
propagates failures from clk_prepare_enable() that were previously ignored.
The GPIO bank device uses the same OF node as the previous of_clk_get()
call, so devm_clk_get_enabled(dev, NULL) correctly resolves the same
clock provider entry.
Fix the reference leak and simplify the code by removing the manual
clk_disable_unprepare() calls in the probe error paths and in the
remove function.
Fixes: 936ee2675e ("gpio/rockchip: add driver for rockchip gpio")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Marco Scardovi <scardracs@disroot.org>
Link: https://patch.msgid.link/20260526171050.12785-2-scardracs@disroot.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
If *ppos is non-zero (user-space write split over multiple calls to
write()) then simple_write_to_buffer() won't initialize the start of the
buffer. Really, non-zero values for *ppos aren't going to work at all.
Check for that and return -EINVAL at the start of the function.
Fixes: 91581c4b3f ("gpio: virtuser: new virtual testing driver for the GPIO API")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://patch.msgid.link/ahP3BJWWy-m_qI0X@stanley.mountain
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
By the time gpio_device_teardown_shared() is called, the parent device
is gone from the global list of GPIO devices and all outstanding SRCU
read-side critical sections have completed. That means that no
concurrent gpio_find_and_request() can call
gpio_shared_add_proxy_lookup() for this device at this time. There's
also no risk of the parent device being re-bound to the driver before
the unbinding completes (including the child devices).
Lockdep produces a false-positive report about a possible circular
dependency as it doesn't know the ordering guarantee. Not taking the
ref->lock in gpio_device_teardown_shared() silences it and is safe to do.
Cc: stable@vger.kernel.org
Fixes: ea513dd3c0 ("gpio: shared: make locking more fine-grained")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260522-gpio-shared-deadlock-v1-2-76bca088f8c0@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Commit 710abda580 ("gpio: shared: call gpio_chip::of_xlate() if set")
used the mutex embedded in struct gpio_shared_entry to protect the
offset field which now can be modified after assignment. The critical
section however is too wide and introduced a potential deadlock on the
removal of the shared GPIO proxy's parent.
Make the critical section shorter - only protect the offset when it's
being read.
While at it: mention the fact that the entry lock is now also used to
protect against concurrent access to the offset field in the structure's
documentation.
Cc: stable@vger.kernel.org
Fixes: 710abda580 ("gpio: shared: call gpio_chip::of_xlate() if set")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260522-gpio-shared-deadlock-v1-1-76bca088f8c0@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Ivan Vecera says:
====================
dpll: zl3073x: various fixes
Three fixes for the zl3073x DPLL driver.
Patch 1 exports __dpll_device_change_ntf() for use by drivers that
need to send device change notifications from within callbacks
already running under dpll_lock.
Patch 2 replaces the change_work workqueue mechanism with direct
calls to __dpll_device_change_ntf(), eliminating a race condition
where the work handler could dereference a freed dpll_dev pointer
during device teardown.
Patch 3 moves the freq_monitor flag from per-DPLL to per-device
scope to match the hardware behavior where frequency measurement
registers are shared across all DPLL channels.
====================
Link: https://patch.msgid.link/20260526074525.1451008-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The frequency monitoring feature uses shared hardware registers
that measure input reference frequencies independently of
individual DPLL channels. However, the freq_monitor flag was
incorrectly placed in the per-DPLL structure, causing each
channel to track its own enable/disable state independently.
Since the DPLL core calls measured_freq_get() only for the first
pin registration, the measured_freq_check() in the periodic worker
was gated by the per-DPLL freq_monitor flag of whichever channel
happens to be checked. If the first DPLL channel had frequency
monitoring disabled while another had it enabled, measurements
were never reported.
Move freq_monitor from struct zl3073x_dpll to struct zl3073x_dev
so all DPLL channels share a single flag, matching the hardware
behavior. Update freq_monitor_set() to notify other DPLL devices
about the change (like phase_offset_avg_factor_set() already does)
and remove the mode-dependent guard in zl3073x_dpll_changes_check()
since all input pin monitoring (pin state, phase offset, FFO, and
measured frequency) works correctly in all DPLL modes.
Fixes: bfc923b642 ("dpll: zl3073x: implement frequency monitoring")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260526074525.1451008-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The change_work was introduced to send device change notifications
from DPLL device callbacks without deadlocking on dpll_lock, since
the callbacks are already invoked under that lock. Now that
__dpll_device_change_ntf() is exported for callers that already
hold dpll_lock, use it directly and remove the change_work
infrastructure entirely.
This eliminates a race condition where change_work could be
re-scheduled after cancel_work_sync() during device teardown,
potentially causing the handler to dereference a freed or NULL
dpll_dev pointer.
Fixes: 9363b48376 ("dpll: zl3073x: Allow to configure phase offset averaging factor")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260526074525.1451008-3-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Export __dpll_device_change_ntf() so that drivers can send device
change notifications from within device callbacks, which are already
called under dpll_lock. Using dpll_device_change_ntf() in that
context would deadlock.
Add lockdep_assert_held() to catch misuse without the lock held.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260526074525.1451008-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Chuck Lever says:
====================
net/handshake: anchor request lifetime to a pinned file reference
handshake_nl_accept_doit() has accumulated four follow-on fixes
since 3b3009ea8a ("net/handshake: Create a NETLINK service for
handling handshake requests"): 7ea9c1ec66, 7798b59409,
fe67b063f6, and dabac51b81. Each was a local refcount or
NULL-check correction; none moved where the file reference is
owned, and the same code keeps producing the same class of bug.
Reworking the ownership is what breaks the pattern.
For the duration of a request, sock->file has no single owner.
Submit publishes the request without taking a file reference;
accept_doit acquires one inside the handler, after the request
has already left the pending list. The consumer can drop its
own reference at any time, including the moment between
handshake_req_next() popping the request and accept_doit
reaching get_file(). The submit-side sock_hold() pins only
struct sock; struct socket and sock->file remain under the
consumer's control via the file descriptor.
This series places the file reference under unambiguous
ownership. handshake_req_submit() pins it on the request and
completion or cancel drops it (patches 4-5); the submit-side
sock_hold() then becomes redundant, and dropping it also closes
a publish-before-pin race the late sock_hold itself opened
(patch 6). The handshake_complete() API and its consumers move
to a uniform negative-errno sign convention (patch 3), with the
matching sign correction in nvme-tcp (patch 2). Patch 1
hardens hn_lock for BH context, the netns-exit drain fix
builds on the new file-pin infrastructure (patch 8), and new
KUnit file-count assertions verify the refcount contract
(patch 7).
Three things in this restructuring want a careful look. In
handshake_complete(), the fput() of the request's file
reference has to come after hp_done() -- fput() can transitively
run handshake_sk_destruct() and free the request, so the patch
stashes hr_file in a local first. handshake_sk_destruct()
itself is kept on purpose: it owns rhashtable removal and
kfree, and remains the backstop if a consumer path bypasses
handshake_complete() entirely. Third, handshake_req_next() now
returns its request with an extra get_file() held under
hn_lock; accept_doit must consume that reference (FD_PREPARE on
success, explicit fput on the fdf.err path), and any future
caller has to honor the same contract.
v2: https://patch.msgid.link/20260521-handshake-file-pin-v2-0-b9dadc472840@oracle.com
v1: https://patch.msgid.link/20260518-handshake-file-pin-v1-0-4bbcb7e62fda@oracle.com
====================
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-0-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-8-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The new file-reference contract on struct handshake_req is silently
breakable: a missing get_file() at submit or a missing fput() on an
error path leaves the file leaked but does not crash the test, so
the existing absence-of-crash checks pass either way.
Snapshot file_count(filp) before each handshake_req_submit() in
the submit-success, EAGAIN, EBUSY, and cancel tests, and assert
the expected balance after submit and again after cancel. The
already-completed cancel test also asserts the post-complete
balance, which pins down that handshake_complete() drops the
reference and that the subsequent cancel does not double-fput.
The destroy test gets the same treatment before __fput_sync(),
which double-checks that cancel's fput() ran and the only
remaining reference is the one sock_alloc_file() established.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-7-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_req_submit() publishes the request via
handshake_req_hash_add() and __add_pending_locked(), drops
hn_lock, and calls handshake_genl_notify() (which can sleep)
before taking sock_hold() on req->hr_sk. A fast tlshd ACCEPT
followed by DONE can drive handshake_complete()'s sock_put()
into the window between the spin_unlock and the late
sock_hold(); on a system where the consumer's fd held the
only sk reference, the late sock_hold() then operates on an
sk whose refcount has reached zero.
The preceding two patches install an explicit file reference
on struct handshake_req. That file pins sock->file, which
pins the embedded struct socket, which defers inet_release()'s
sock_put(). As long as hr_file is held, sk cannot reach refcount
zero from the consumer side, and the submit-side sock_hold()
with its matching sock_put() calls in handshake_complete() and
handshake_req_cancel() is now redundant.
Drop all three. The file reference already keeps each request's
socket alive, and the lifetime story is contained in a single
get_file()/fput() pair.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-6-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced.
Reported-by: Chris Mason <clm@meta.com>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-5-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-4-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
handshake_complete() declares status as unsigned int and
tls_handshake_done() negates that value (-status) before handing
it to the TLS consumer. Consumers match on negative errno
constants -- xs_tls_handshake_done() has
switch (status) {
case 0:
case -EACCES:
case -ETIMEDOUT:
lower_transport->xprt_err = status;
break;
default:
lower_transport->xprt_err = -EACCES;
}
so the API as designed expects callers to pass positive errno
values that the tlshd shim then negates.
Three internal callers in handshake_nl_accept_doit(), the
net-exit drain, and a kunit test follow kernel convention and
pass negative errnos -- -EIO, -ETIMEDOUT, -ETIMEDOUT. The
implicit conversion to unsigned int turns -ETIMEDOUT into
0xFFFFFF92; the subsequent -status in tls_handshake_done()
wraps back to 110, the consumer's switch falls through, and
the xprt reports -EACCES on what should be -ETIMEDOUT or -EIO.
Fix the API rather than the call sites. The natural kernel
convention is negative errno in, negative errno out. Change
handshake_complete() and hp_done to take int status, drop the
negation in tls_handshake_done(), and negate once in
handshake_nl_done_doit() where status arrives from the wire
as an unsigned netlink attribute. The three internal callers
were already correct under that convention and need no change.
At the same wire boundary, declare MAX_ERRNO as the netlink
policy upper bound for HANDSHAKE_A_DONE_STATUS. Attribute
validation rejects out-of-range values before
handshake_nl_done_doit() runs, and negating a bounded u32 there
stays within int range -- closing the UBSAN-visible signed-
integer overflow that an unconstrained u32 would invoke.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260525-handshake-file-pin-v3-3-66c616906ead@oracle.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
