Rather than open-coding the calls to sun7i_gmac_init() and
sun7i_gmac_exit() in the probe function, use stmmac_pltfr_probe()
which will automatically call the plat_dat->init() and plat_dat->exit()
methods appropriately. This simplifies the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4frZ-000nMl-BB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert sunxi to use the set_clk_tx_rate() callback rather than the
fix_mac_speed() callback.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1u4frU-000nMf-6o@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- 2 fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth: hibmcge: fixes for link and MTU handling, pause frames etc.
- eth: igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EObk
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN and Netfilter.
Current release - regressions:
- two fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream
sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCaAEWhAAKCRCAXGG7T9hj
vne3AQCXbD8VtBJZEZ6h3sxRYLYpDHaJa5B0NTNUwgbVDPG/pgD/ad8c8iOomlWT
EllZmgwobkMwz0XZHDjsBfHIYjA4AgE=
=aDuc
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.15a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Just a single fix for the Xen multicall driver avoiding a percpu
variable referencing initdata by its initializer"
* tag 'for-linus-6.15a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix multicall debug feature
Three small changes from further build testing
- Don't rely on the userspace uuid.h for the uapi header
- Fix sparse warnings in pds
- Typo in log message
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaADznQAKCRCFwuHvBreF
YaqUAP9JEF8mbmT1WZhYfxq/IQAEIdIZ2uCEoZF2JoBa0Llh8wD/Zuyw3rdQDd/Y
j5Yhvj/rsbAA10ALpFNl8e/L38FN0AI=
=TJeD
-----END PGP SIGNATURE-----
Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl fixes from Jason Gunthorpe:
"Three small changes from further build testing:
- Don't rely on the userspace uuid.h for the uapi header
- Fix sparse warnings in pds
- Typo in log message"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
fwctl: Fix repeated device word in log message
pds_fwctl: Fix type and endian complaints
fwctl/cxl: Fix uuid_t usage in uapi
A collection of small fixes since the previous PR. All are
device-specific like quirks, new IDs, and other safe (or rather
boring) changes.
-----BEGIN PGP SIGNATURE-----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=MjEv
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All are device-specific like quirks, new
IDs, and other safe (or rather boring) changes"
* tag 'sound-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
firmware: cs_dsp: test_bin_error: Fix uninitialized data used as fw version
ASoC: codecs: Add of_match_table for aw888081 driver
ASoC: fsl: fsl_qmc_audio: Reset audio data pointers on TRIGGER_START event
mailmap: Add entry for Srinivas Kandagatla
MAINTAINERS: use kernel.org alias
ASoC: cs42l43: Reset clamp override on jack removal
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/cirrus_scodec_test: Don't select dependencies
ALSA: azt2320: Replace deprecated strcpy() with strscpy()
ASoC: hdmi-codec: use RTD ID instead of DAI ID for ELD entry
ASoC: Intel: avs: Constrain path based on BE capabilities
ALSA: hda/tas2781: Remove unnecessary NULL check before release_firmware()
ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe()
ASoC: fsl_asrc_dma: get codec or cpu dai from backend
ASoC: qcom: Fix sc7280 lpass potential buffer overflow
ASoC: dwc: always enable/disable i2s irqs
ASoC: Intel: sof_sdw: Add quirk for Asus Zenbook S16
ASoC: codecs:lpass-wsa-macro: Fix logic of enabling vi channels
ASoC: codecs:lpass-wsa-macro: Fix vi feedback rate
Fixes:
- amd/pmf: Fix STT limits
- asus-laptop: Fix an uninitialized variable
- intel_pmc_ipc: Allow building without ACPI
- mlxbf-bootctl: Use sysfs_emit_at() in secure_boot_fuse_state_show()
- msi-wmi-platform: Add locking to workaround ACPI firmware bug
New HW support:
- alienware-wmi-wmax:
- Extended thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
- G-Mode support to Alienware m16 R1
- x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data
The following is an automated shortlog grouped by driver:
alienware-wmi-wmax:
- Add G-Mode support to Alienware m16 R1
- Extend support to more laptops
amd: pmf:
- Fix STT limits
asus-laptop:
- Fix an uninitialized variable
intel_pmc_ipc:
- add option to build without ACPI
mlxbf-bootctl:
- use sysfs_emit_at() in secure_boot_fuse_state_show()
msi-wmi-platform:
- Rename "data" variable
- Workaround a ACPI firmware bug
x86-android-tablets:
- Add "9v" to Vexia EDU ATLA 10 tablet symbols
- Add Vexia Edu Atla 10 tablet 5V data
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaADiBwAKCRBZrE9hU+XO
MYKKAP422M/5lQvZ0paUfSPqqNEG9OVbvMRGBQObh2GndvSy9AD/f66RnPoP11hw
4eIYTstCQ1vQkv/u0ckehey6jGJ5ngQ=
=Aidx
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Fixes:
- amd/pmf: Fix STT limits
- asus-laptop: Fix an uninitialized variable
- intel_pmc_ipc: Allow building without ACPI
- mlxbf-bootctl: Use sysfs_emit_at() in secure_boot_fuse_state_show()
- msi-wmi-platform: Add locking to workaround ACPI firmware bug
New HW support:
- alienware-wmi-wmax:
- Extended thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
- G-Mode support to Alienware m16 R1
- x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data"
* tag 'platform-drivers-x86-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: msi-wmi-platform: Workaround a ACPI firmware bug
platform/x86: msi-wmi-platform: Rename "data" variable
platform/x86: alienware-wmi-wmax: Extend support to more laptops
platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1
platform/x86: amd: pmf: Fix STT limits
mlxbf-bootctl: use sysfs_emit_at() in secure_boot_fuse_state_show()
platform/x86: x86-android-tablets: Add Vexia Edu Atla 10 tablet 5V data
platform/x86: x86-android-tablets: Add "9v" to Vexia EDU ATLA 10 tablet symbols
asus-laptop: Fix an uninitialized variable
platform/x86: intel_pmc_ipc: add option to build without ACPI
Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaAESXSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheZEAP9MlF9G
HweD8/hs3zZzxHP/ct54wVKgjJ5gJuMhdqrGzgD+MEE/kZyP3HHERdQkABoxElPI
A/rgudwth9RqV9c1Czo=
=1X33
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Small drivers fixes, except for ufs which has two large updates, one
for exposing the device level feature, which is a new addition to the
device spec and the other reworking the exynos driver to fix coherence
issues on some android phones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
scsi: megaraid_sas: Block zero-length ATA VPD inquiry
scsi: scsi_transport_srp: Replace min/max nesting with clamp()
scsi: ufs: core: Add device level exception support
scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
scsi: smartpqi: Use is_kdump_kernel() to check for kdump
scsi: pm80xx: Set phy_attached to zero when device is gone
scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
scsi: ufs: exynos: Move phy calls to .exit() callback
scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
scsi: ufs: exynos: Ensure consistent phy reference counts
scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
scsi: ufs: exynos: Move UFS shareability value to drvdata
scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
scsi: iscsi: Fix missing scsi_host_put() in error path
scsi: ufs: core: Fix a race condition related to device commands
scsi: hisi_sas: Fix I/O errors caused by hardware port ID changes
scsi: hisi_sas: Enable force phy when SATA disk directly connected
- Fix how sense data from the sense data for successfull NCQ commands
log page is used to fully initialize the result_tf of a completed
command, so that the sense data returned to the scsi layer is fully
initialized with all the device provided information (from Niklas).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCaADmwwAKCRDdoc3SxdoY
dppkAP4hgVSzzwEXOOB29nlPEFDM7mpAmA8Rbq274owE3MIwEQD/UT8pOfQIO6zO
U+GJXsmuglYlnoI3LnTguTKvx1iTtgA=
=4+J5
-----END PGP SIGNATURE-----
Merge tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Damien Le Moal:
- Fix how sense data from the sense data for successfull NCQ commands
log page is used to fully initialize the result_tf of a completed
command, so that the sense data returned to the scsi layer is fully
initialized with all the device provided information (from Niklas)
* tag 'ata-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: Save all fields from sense data descriptor
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaADqUgAKCRBcsMJ8RxYu
Y+7RAX4zY9d/ub0PfJ+/Ml1LyN2deqrKCtjEJHYaMhrFfp+3b92Tn8eBiDGF1VlG
qNoNcbMBgIMk5SPu1qimUOIo0IZO3bfMz/wJwvEPKxdw6pCB8rRCBfUOZ0j7tIXv
RP1NX2PIew==
=0eib
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS fixes from Carlos Maiolino:
"This mostly includes fixes and documentation for the zoned allocator
feature merged during previous merge window, but it also adds a sysfs
tunable for the zone garbage collector.
There is also a fix for a regression to the RT device that we'd like
to fix ASAP now that we're getting more users on the RT zoned
allocator"
* tag 'xfs-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document zoned rt specifics in admin-guide
xfs: fix fsmap for internal zoned devices
xfs: Fix spelling mistake "drity" -> "dirty"
xfs: compute buffer address correctly in xmbuf_map_backing_mem
xfs: add tunable threshold parameter for triggering zone GC
xfs: mark xfs_buf_free as might_sleep()
xfs: remove the leftover xfs_{set,clear}_li_failed infrastructure
-----BEGIN PGP SIGNATURE-----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=HZ/U
-----END PGP SIGNATURE-----
Merge tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- handle encoded read ioctl returning EAGAIN so it does not mistakenly
free the work structure
- escape subvolume path in mount option list so it cannot be wrongly
parsed when the path contains ","
- remove folio size assertions when writing super block to device with
enabled large folios
* tag 'for-6.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: remove folio order ASSERT()s in super block writeback path
btrfs: correctly escape subvol in btrfs_show_options()
btrfs: ioctl: don't free iov when btrfs_encoded_read() returns -EAGAIN
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmgAyqUACgkQu+CwddJF
iJrbtQf/Z4yPM96vm+AFPYrzZHvLKMgjpu7bb5M+6kHLjnu7eZ1n82rnGZ+kBFxp
uUbDSGkh6U608P8Va6Fd6FBtwr9bFvCrL3Ek4XMDuuAbOUrZ3w9YvhDXeMxdUnLi
KpVLT3BVc7kA3EP5gQsQm1zesAFlknwwXTKEBETS5zuferxYpatghQdqK/JbBoVp
h7EJ8HThCLoy3UOm6nb/wmkNn1i6Vl+W9VY81fFOHmMLnt8ISNeRcjUu1EvlP1jy
TAPHBisMd4nKpIedNARXFChQvm04zSjNgoDD6hHFFVu/alljDHxFMhLM7tjp/zjQ
Cab2Vb7jTbdOmuV06+oF3wik2a58sg==
=AYL8
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Stable fix adding zero initialization of slab->obj_ext to prevent
crashes with allocation profiling (Suren Baghdasaryan)
* tag 'slab-for-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: ensure slab->obj_exts is clear in a newly allocated slab page
The QDMA packet scheduler suffers from a performance issue.
Fix this by picking up changes from MediaTek's SDK which change to use
Token Bucket instead of Leaky Bucket and fix the SPEED_1000 configuration.
Fixes: 160d3a9b19 ("net: ethernet: mtk_eth_soc: introduce MTK_NETSYS_V2 support")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/18040f60f9e2f5855036b75b28c4332a2d2ebdd8.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without this patch, the maximum weight of the queue limit will be
incorrect when linked at 100Mbps due to an apparent typo.
Fixes: f63959c7ee ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/74111ba0bdb13743313999ed467ce564e8189006.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current method, the MDC divider was reset to the default setting
of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC
divider configuration function in mtk_hw_init() after reset.
Fixes: c0a440031d ("net: ethernet: mtk_eth_soc: set MDIO bus clock frequency")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/8ab7381447e6cdcb317d5b5a6ddd90a1734efcb0.1744764277.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=VG/D
-----END PGP SIGNATURE-----
Merge tag 'nf-25-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following batch contains one Netfilter fix for net:
1) conntrack offload bit is erroneously unset in a race scenario,
from Florian Westphal.
netfilter pull request 25-04-17
* tag 'nf-25-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: fix erronous removal of offload bit
====================
Link: https://patch.msgid.link/20250417102847.16640-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- l2cap: Process valid commands in too long frame
- vhci: Avoid needless snprintf() calls
-----BEGIN PGP SIGNATURE-----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=8ull
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- l2cap: Process valid commands in too long frame
- vhci: Avoid needless snprintf() calls
* tag 'for-net-2025-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: vhci: Avoid needless snprintf() calls
Bluetooth: l2cap: Process valid commands in too long frame
====================
Link: https://patch.msgid.link/20250416210126.2034212-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Peter Seiderer says:
====================
net: pktgen: fix checkpatch code style errors/warnings
Fix checkpatch detected code style errors/warnings detected in
the file net/core/pktgen.c (remaining checkpatch checks will be addressed
in a follow up patch set).
====================
Link: https://patch.msgid.link/20250415112916.113455-1-ps.report@gmx.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Justin Iurman says:
====================
Mitigate double allocations in ioam6_iptunnel
Commit dce525185b ("net: ipv6: ioam6_iptunnel: mitigate 2-realloc
issue") fixed the double allocation issue in ioam6_iptunnel. However,
since commit 92191dd107 ("net: ipv6: fix dst ref loops in rpl, seg6
and ioam6 lwtunnels"), the fix was left incomplete. Because the cache is
now empty when the dst_entry is the same post transformation in order to
avoid a reference loop, the double reallocation is back for such cases
(e.g., inline mode) which are valid for IOAM. This patch provides a way
to detect such cases without having a reference loop in the cache, and
so to avoid the double reallocation issue for all cases again.
v1: https://lore.kernel.org/netdev/20250410152432.30246-1-justin.iurman@uliege.be/T/#t
====================
Link: https://patch.msgid.link/20250415112554.23823-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the dst_entry is the same post transformation (which is a valid use
case for IOAM), we don't add it to the cache to avoid a reference loop.
Instead, we use a "fake" dst_entry and add it to the cache as a signal.
When we read the cache, we compare it with our "fake" dst_entry and
therefore detect if we're in the special case.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250415112554.23823-3-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Be consistent and use the same terminology as other lwt users: orig_dst
is the dst_entry before the transformation, while dst is either the
dst_entry in the cache or the dst_entry after the transformation
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250415112554.23823-2-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Antonio Quartulli says:
====================
Introducing OpenVPN Data Channel Offload
Notable changes since v25:
* removed netdev notifier (was only used for our own devices)
* added .dellink implementation to address what was previously
done in notifier
* removed .ndo_open and moved netif_carrier_off() call to .ndo_init
* fixed author in MODULE_AUTHOR()
* properly indented checks in ovpn.yaml
* switched from TSTATS to DSTATS
* removed obsolete comment in ovpn_socket_new()
* removed unrelated hunk in ovpn_socket_new()
The latest code can also be found at:
https://github.com/OpenVPN/ovpn-net-next
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
====================
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-0-577f6097b964@openvpn.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ovpn-cli tool can be compiled and used as selftest for the ovpn
kernel module.
[NOTE: it depends on libmedtls for decoding base64-encoded keys]
ovpn-cli implements the netlink and RTNL APIs and can thus be integrated
in any script for more automated testing.
Along with the tool, a bunch of scripts are provided that perform basic
functionality tests by means of network namespaces.
These scripts take part to the kselftest automation.
The output of the scripts, which will appear in the kselftest
reports, is a list of steps performed by the scripts plus some
output coming from the execution of `ping`, `iperf` and `ovpn-cli`
itself.
In general it is useful only in case of failure, in order to
understand which step has failed and why.
Please note: since peer sockets are tied to the userspace
process that created them (i.e. exiting the process will result
in closing the socket), every run of ovpn-cli that created
one will go to background and enter pause(), waiting for the
signal which will allow it to terminate.
Termination is accomplished at the end of each script by
issuing a killall command.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-23-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement support for basic ethtool functionality.
Note that ovpn is a virtual device driver, therefore
various ethtool APIs are just not meaningful and thus
not implemented.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-22-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whenever a peer is deleted, send a notification to userspace so that it
can react accordingly.
This is most important when a peer is deleted due to ping timeout,
because it all happens in kernelspace and thus userspace has no direct
way to learn about it.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-21-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IV wrap-around is cryptographically dangerous for a number of ciphers,
therefore kill the key and inform userspace (via netlink) should the
IV space go exhausted.
Userspace has two ways of deciding when the key has to be renewed before
exhausting the IV space:
1) time based approach:
after X seconds/minutes userspace generates a new key and sends it
to the kernel. This is based on guestimate and normally default
timer value works well.
2) packet count based approach:
after X packets/bytes userspace generates a new key and sends it to
the kernel. Userspace keeps track of the amount of traffic by
periodically polling GET_PEER and fetching the VPN/LINK stats.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-20-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change introduces the netlink commands needed to add, get, delete
and swap keys for a specific peer.
Userspace is expected to use these commands to create, inspect (non
sensitive data only), destroy and rotate session keys for a specific
peer.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-19-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change introduces the netlink command needed to add, delete and
retrieve/dump known peers. Userspace is expected to use these commands
to handle known peer lifecycles.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-18-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In case of UDP links, the local or remote endpoint used to communicate
with a given peer may change without a connection restart.
Add support for learning the new address in case of change.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-17-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
OpenVPN supports configuring a periodic keepalive packet.
message to allow the remote endpoint detect link failures.
This change implements the keepalive sending and timer expiring logic.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-16-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In a multi-peer scenario there are a number of situations when a
specific peer needs to be looked up.
We may want to lookup a peer by:
1. its ID
2. its VPN destination IP
3. its transport IP/port couple
For each of the above, there is a specific routing table referencing all
peers for fast look up.
Case 2. is a bit special in the sense that an outgoing packet may not be
sent to the peer VPN IP directly, but rather to a network behind it. For
this reason we first perform a nexthop lookup in the system routing
table and then we use the retrieved nexthop as peer search key.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-15-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With this change an ovpn instance will be able to stay connected to
multiple remote endpoints.
This functionality is strictly required when running ovpn on an
OpenVPN server.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-14-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Userspace may want to pass the MSG_NOSIGNAL flag to
tcp_sendmsg() in order to avoid generating a SIGPIPE.
To pass this flag down the TCP stack a new skb sending API
accepting a flags argument is introduced.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-13-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When sending an skb over a socket using skb_send_sock_locked(),
it is currently not possible to specify any flag to be set in
msghdr->msg_flags.
However, we may want to pass flags the user may have specified,
like MSG_NOSIGNAL.
Extend __skb_send_sock() with a new argument 'flags' and add a
new interface named skb_send_sock_locked_with_flags().
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-12-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With this change ovpn is allowed to communicate to peers also via TCP.
Parsing of incoming messages is implemented through the strparser API.
Note that ovpn redefines sk_prot and sk_socket->ops for the TCP socket
used to communicate with the peer.
For this reason it needs to access inet6_stream_ops, which is declared
as extern in the IPv6 module, but it is not fully exported.
Therefore this patch is also adding EXPORT_SYMBOL_GPL(inet6_stream_ops)
to net/ipv6/af_inet6.c.
Cc: David Ahern <dsahern@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-11-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Byte/packet counters for in-tunnel and transport streams
are now initialized and updated as needed.
To be exported via netlink.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-10-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change implements encryption/decryption and
encapsulation/decapsulation of OpenVPN packets.
Support for generic crypto state is added along with
a wrapper for the AEAD crypto kernel API.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-9-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Packets received over the socket are forwarded to the user device.
Implementation is UDP only. TCP will be added by a later patch.
Note: no decryption/decapsulation exists yet, packets are forwarded as
they arrive without much processing.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-8-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Packets sent over the ovpn interface are processed and transmitted to the
connected peer, if any.
Implementation is UDP only. TCP will be added by a later patch.
Note: no crypto/encapsulation exists yet. Packets are just captured and
sent.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-7-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This specific structure is used in the ovpn kernel module
to wrap and carry around a standard kernel socket.
ovpn takes ownership of passed sockets and therefore an ovpn
specific objects is attached to them for status tracking
purposes.
Initially only UDP support is introduced. TCP will come in a later
patch.
Cc: willemdebruijn.kernel@gmail.com
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-6-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An ovpn_peer object holds the whole status of a remote peer
(regardless whether it is a server or a client).
This includes status for crypto, tx/rx buffers, napi, etc.
Only support for one peer is introduced (P2P mode).
Multi peer support is introduced with a later patch.
Along with the ovpn_peer, also the ovpn_bind object is introcued
as the two are strictly related.
An ovpn_bind object wraps a sockaddr representing the local
coordinates being used to talk to a specific peer.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-5-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An ovpn interface configured in MP mode will keep carrier always
on and let the user decide when to bring it administratively up and
down.
This way a MP node (i.e. a server) will keep its interface always
up and running, even when no peer is connected.
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-4-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit introduces basic netlink support with family
registration/unregistration functionalities and stub pre/post-doit.
More importantly it introduces the YAML uAPI description along
with its auto-generated files:
- include/uapi/linux/ovpn.h
- drivers/net/ovpn/netlink-gen.c
- drivers/net/ovpn/netlink-gen.h
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-2-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
OpenVPN is a userspace software existing since around 2005 that allows
users to create secure tunnels.
So far OpenVPN has implemented all operations in userspace, which
implies several back and forth between kernel and user land in order to
process packets (encapsulate/decapsulate, encrypt/decrypt, rerouting..).
With `ovpn` we intend to move the fast path (data channel) entirely
in kernel space and thus improve user measured throughput over the
tunnel.
`ovpn` is implemented as a simple virtual network device driver, that
can be manipulated by means of the standard RTNL APIs. A device of kind
`ovpn` allows only IPv4/6 traffic and can be of type:
* P2P (peer-to-peer): any packet sent over the interface will be
encapsulated and transmitted to the other side (typical OpenVPN
client or peer-to-peer behaviour);
* P2MP (point-to-multipoint): packets sent over the interface are
transmitted to peers based on existing routes (typical OpenVPN
server behaviour).
After the interface has been created, OpenVPN in userspace can
configure it using a new Netlink API. Specifically it is possible
to manage peers and their keys.
The OpenVPN control channel is multiplexed over the same transport
socket by means of OP codes. Anything that is not DATA_V2 (OpenVPN
OP code for data traffic) is sent to userspace and handled there.
This way the `ovpn` codebase is kept as compact as possible while
focusing on handling data traffic only (fast path).
Any OpenVPN control feature (like cipher negotiation, TLS handshake,
rekeying, etc.) is still fully handled by the userspace process.
When userspace establishes a new connection with a peer, it first
performs the handshake and then passes the socket to the `ovpn` kernel
module, which takes ownership. From this moment on `ovpn` will handle
data traffic for the new peer.
When control packets are received on the link, they are forwarded to
userspace through the same transport socket they were received on, as
userspace is still listening to them.
Some events (like peer deletion) are sent to a Netlink multicast group.
Although it wasn't easy to convince the community, `ovpn` implements
only a limited number of the data-channel features supported by the
userspace program.
Each feature that made it to `ovpn` was attentively vetted to
avoid carrying too much legacy along with us (and to give a clear cut to
old and probalby-not-so-useful features).
Notably, only encryption using AEAD ciphers (specifically
ChaCha20Poly1305 and AES-GCM) was implemented. Supporting any other
cipher out there was not deemed useful.
Both UDP and TCP sockets are supported.
As explained above, in case of P2MP mode, OpenVPN will use the main system
routing table to decide which packet goes to which peer. This implies
that no routing table was re-implemented in the `ovpn` kernel module.
This kernel module can be enabled by selecting the CONFIG_OVPN entry
in the networking drivers section.
NOTE: this first patch introduces the very basic framework only.
Features are then added patch by patch, however, although each patch
will compile and possibly not break at runtime, only after having
applied the full set it is expected to see the ovpn module fully working.
Cc: steffen.klassert@secunet.com
Cc: antony.antony@secunet.com
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-1-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Meghana Malladi says:
====================
Bug fixes from XDP and perout series
This patch series consists of bug fixes from the XDP series:
1. Fixes a kernel warning that occurs when bringing down the
network interface.
2. Resolves a potential NULL pointer dereference in the
emac_xmit_xdp_frame() function.
3. Resolves a potential NULL pointer dereference in the
icss_iep_perout_enable() function
v3: https://lore.kernel.org/all/20250328102403.2626974-1-m-malladi@ti.com/
====================
Link: https://patch.msgid.link/20250415090543.717991-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
