Daniel Machon says:
====================
net: sparx5: misc fixes for sparx5 and lan969x
This series fixes various issues in the sparx5 driver, which also
serves lan969x.
Details are in the individual commit descriptions.
====================
Link: https://patch.msgid.link/20260817-misc-fixes-sparx5-lan969x-v3-0-c7c7fef723a8@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates
dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() /
sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These
take sparx5->lock, a mutex, and then poll the MAC access command
register with readx_poll_timeout(). A mutex may block, which is not
allowed from atomic context.
Convert the driver to the new .ndo_set_rx_mode_async callback introduced
in commit 3554b4345d ("net: introduce ndo_set_rx_mode_async and
netdev_rx_mode_work"). The async callback is invoked from process
context, so the mutex and sleeping completion poll can remain.
Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK,
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip
preempt_count: 201, expected: 0
Call trace:
__might_resched+0x144/0x248
__might_sleep+0x48/0x7c
__mutex_lock+0x74/0x850
mutex_lock_nested+0x24/0x30
sparx5_mact_learn+0x78/0x100
sparx5_mc_sync+0x40/0x54
__hw_addr_sync_dev+0xc4/0x170
sparx5_set_rx_mode+0x4c/0x58
__dev_set_rx_mode+0x64/0xa4
__dev_open+0x1ec/0x26c
Fixes: d6fce51419 ("net: sparx5: add switching support")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260817-misc-fixes-sparx5-lan969x-v3-2-c7c7fef723a8@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sparx5_vcap_init() runs before sparx5_register_netdevs() in probe, and
its debugfs setup calls vcap_port_debugfs() for every port using
netdev_name(ndev) as the debugfs file name. At that point the netdevs
have only been allocated, not registered, so dev->name still holds the
"eth%d" template and netdev_name() returns "(unnamed net_device)".
Every port tries to create the same file under vcaps/, producing a
flood of warnings at boot:
debugfs: '(unnamed net_device)' already exists in 'vcaps'
debugfs: '(unnamed net_device)' already exists in 'vcaps'
...
Add vcap_port_debugfs_portno(), a variant of vcap_port_debugfs() that
takes the port's stable hardware port number and uses "p%u" as the
debugfs file name instead of netdev_name(ndev). This makes the file
name independent of registration order; the file still stores and
later dereferences the netdev itself, same as before. sparx5 already
reports the same "p%d" string via ndo_get_phys_port_name(), so the
debugfs name now matches that.
Only sparx5 (and lan969x, which shares this code) is switched to the
new function. lan966x keeps calling vcap_port_debugfs() unchanged, so
this fix does not rename any of its existing debugfs files.
Fixes: b8909aad5b ("net: sparx5: move netdev and notifier block registration to probe")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20260817-misc-fixes-sparx5-lan969x-v3-1-c7c7fef723a8@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PDP contexts can be deleted through GTP_CMD_DELPDP or while the GTP
network device is being unregistered. The latter is serialized by RTNL,
but the generic-netlink delete path only holds RCU.
Running both paths concurrently can therefore make both paths delete the
same PDP context. The issue was found through static analysis and
reproduced on a KASAN-enabled kernel by a simple two-thread program
racing GTP_CMD_DELPDP against RTM_DELLINK:
Oops: general protection fault, probably for non-canonical address
KASAN: maybe wild-memory-access in range
[0xdead000000000120-0xdead000000000127]
RIP: gtp_genl_del_pdp+0x1c1/0x420 [gtp]
RBP: dead000000000122
The second deletion dereferenced the poisoned hlist pprev pointer.
Serialize gtp_pdp_add(), gtp_genl_del_pdp(), and gtp_dellink() with a
shared mutex. Keep the mutex held until the final use of a PDP context in
the NEWPDP path, and keep the RCU read-side section around the complete
PDP context use in the DELPDP path.
Fixes: 459aa660eb ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Cc: stable@vger.kernel.org
Signed-off-by: Qing Ming <a0yami@mailbox.org>
Link: https://patch.msgid.link/20260818150000.7670-1-a0yami@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page
and advertises PAGE_SIZE as its frame size. It allows the copied frame
to occupy the page tail needed by skb_shared_info and records zero
headroom even when metadata separates the frame header from packet data.
An AF_XDP zero-copy packet redirected through cpumap can therefore make
the skb overlap skb_shared_info or place it beyond the allocated page.
Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the
metadata length in frame headroom. Redirect callers already handle a
NULL conversion result.
BUG: KASAN: slab-out-of-bounds in skb_gro_receive
Write of size 4 at addr ffff88800cf37004 by task cpumap/1/map:1/146
Call Trace:
skb_gro_receive (net/core/gro.c:174)
udp_gro_receive (net/ipv4/udp_offload.c:812)
inet_gro_receive (net/ipv4/af_inet.c:1539)
dev_gro_receive (net/core/gro.c:515)
gro_receive_skb (net/core/gro.c:633)
cpu_map_kthread_run (kernel/bpf/cpumap.c:395)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
ret_from_fork_asm (arch/x86/entry/entry_64.S:255)
Kernel panic - not syncing: KASAN: panic_on_warn set ...
Fixes: b0d1beeff2 ("xdp: implement convert_to_xdp_frame for MEM_TYPE_ZERO_COPY")
Cc: stable@vger.kernel.org
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260818154516.793517-1-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When replacement skb allocation fails, ntb_netdev drops a packet that
was received successfully and requeues the original buffer. The drop is
counted, but rx_packets and rx_bytes are not.
Count every good packet before allocating its replacement.
Fixes: d2121faf13 ("NTB: ntb_netdev: Preserve RX queue depth on allocation failure")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Link: https://patch.msgid.link/20260819172539.1450821-3-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netif_rx() already accounts packets it drops in the core rx_dropped
counter. ntb_netdev counts them again as both errors and drops.
Leave netif_rx() drops to the core. Count the packet and bytes
unconditionally since it was received successfully by the driver.
Fixes: 548c237c0a ("net: Add support for NTB virtual ethernet device")
Cc: stable@vger.kernel.org
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Link: https://patch.msgid.link/20260819172539.1450821-2-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_select_initial_window() assumes that callers never pass an MSS
smaller than 1, but route-derived advmss values can violate that
assumption.
A too-small explicit RTAX_ADVMSS is one way to get there, but it is not
the only one. The same divide-by-zero can also be reached through the
"default advmss" path when RTAX_ADVMSS is left at 0 and the effective
advmss is later driven down by route MTU and min_adv_mss.
Introduce a tcp_dst_advmss() helper that clamps route advmss to
TCP_MIN_MSS before TCP consumes it, and use it in the TCP paths that
derive advmss from dst metrics. This keeps the effective MSS from
dropping to zero before tcp_select_initial_window() rounds the receive
window.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Yong Wang <edragain@163.com>
Signed-off-by: Ren Wei <weir@nebusec.ai>
Link: https://patch.msgid.link/251eaf8277fa7c66364c9815c5da01662d269181.1787074852.git.edragain@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In collect_md mode ipip_tunnel_rcv() returns 0 without freeing the skb
when ip_tun_rx_dst() fails to allocate the metadata_dst. ipip_rcv() and
mplsip_rcv() are registered as xfrm_tunnel handlers, so tunnel4_rcv()
and tunnelmpls4_rcv() read the zero return as "the packet has been
consumed" and do not free it either. The skb is leaked.
The other tunnel drivers all dispose of the packet at this point:
ip6_tunnel.c jumps to its drop label, ip_gre.c and ip6_gre.c return
PACKET_REJECT, which makes gre_rcv() free the skb. Only ipip returns 0.
Jump to the existing drop label instead. It frees the skb and still
returns 0, so the packet keeps being reported as consumed, which is what
we want here: the outer header has already been pulled, and neither the
remaining handlers nor an ICMP unreachable have any use for it.
Triggering this needs an ipip or mplsip tunnel in collect_md mode and an
atomic allocation failure, which is why it has gone unnoticed.
Fixes: cfc7381b30 ("ip_tunnel: add collect_md mode to IPIP tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260819104338.432631-2-littlesmilingcloud@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allocations in the tc classifier *_change() paths (filter objects,
per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without
__GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside
memcg charging. The shared tcf_exts_init_ex() action array allocation in
cls_api.c was also uncharged; this patch closes it along with the
per-classifier filter-object/percpu/aux allocations that remain
unaccounted.
Add GFP_KERNEL_ACCOUNT to:
- the shared tcf_exts_init_ex() action array (cls_api.c), common to every
filter of every classifier (32 pointers, 256 bytes);
- the filter-object, per-CPU-counter, and per-filter aux allocations in
cls_basic, cls_bpf, cls_cgroup, cls_flow, cls_flower, cls_fw,
cls_matchall, cls_route and cls_u32;
- the u32_init_knode() replace-path knode allocation (cls_u32.c), which
allocates the same struct tc_u_knode + sel.keys on every replace of an
existing knode and was missed by the create-path-only conversion.
Also fix the cls_basic error path: basic_change() inserts fnew into the
IDR before allocating the per-CPU counter. If alloc_percpu() fails the
errout path kfree'd fnew without idr_remove, leaving a dangling pointer
in the IDR. With GFP_KERNEL_ACCOUNT the percpu alloc becomes failable
on demand (memcg at memory.max), making the dead path attacker-reachable
and burning the handle permanently. Add the idr_remove on the percpu
failure path, matching the basic_set_parms failure-path pattern.
Note: vega@nebusec.ai provided a poc for basic_cls, but it was easy to
extend to the other classifiers.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_CLS_* (the classifier being used),
CONFIG_NET_CLS_ACT, CONFIG_MEMCG, CONFIG_USER_NS, CONFIG_NET_NS.
- Unprivileged user in a fresh user+network namespace (unshare -Urn),
or root with CAP_NET_ADMIN.
- Create a large number of tc filters (e.g. tc filter add dev lo
ingress ... <classifier> ...) while watching a memcg-limited cgroup:
system slab grows far faster than memory.current, pinning kernel
memory outside memcg charging.
Fixes: 0da974f4f3 ("[NET]: Conversions from kmalloc+memset to k(z|c)alloc.")
Reported-by: vega@nebusec.ai
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260819143733.57538-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix stale receive device on merged fragments, by Zhiling Zou
the others are written by Sven Eckelmann:
- bla: fix potential CRC corruption issues (2 patches)
- dat: avoid unaligned fault in IP extraction
- dat: atomically update mac addresses
- mcast: fix TX priority extraction for BATADV_FORW_MCAST
- mcast: fix skb sharing and linearization (2 patches)
- bla: fix freeing of claims on meshif deletion
-----BEGIN PGP SIGNATURE-----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=YLMX
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260821' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are a few batman-adv bugfixes:
- fix stale receive device on merged fragments, by Zhiling Zou
the others are written by Sven Eckelmann:
- bla: fix potential CRC corruption issues (2 patches)
- dat: avoid unaligned fault in IP extraction
- dat: atomically update mac addresses
- mcast: fix TX priority extraction for BATADV_FORW_MCAST
- mcast: fix skb sharing and linearization (2 patches)
- bla: fix freeing of claims on meshif deletion
* tag 'batadv-net-pullrequest-20260821' of https://git.open-mesh.org/batadv:
batman-adv: bla: fix freeing of claims on meshif deletion
batman-adv: mcast: linearize skbuff for packet generation
batman-adv: mcast: ensure unshared skb for multicast packets
batman-adv: fix TX priority extraction for BATADV_FORW_MCAST
batman-adv: dat: atomically update mac addresses
batman-adv: dat: avoid unaligned fault in IP extraction
batman-adv: bla: prevent CRC corruptions after claim flush
batman-adv: bla: avoid CRC corruption due to parallel claim add
batman-adv: fix stale receive device on merged fragments
====================
Link: https://patch.msgid.link/20260821094813.201800-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The max_period bound in net_timer_enable_perout() was computed as:
max_period = (u64)NETC_TMR_DEFAULT_FIPER + integral_period;
which exceeds U32_MAX when integral_period > 0 (e.g. 0x100000002 for
the default 333333333 Hz clock). A period_ns that passes this check but
exceeds U32_MAX is then silently truncated when stored into the u32
struct netc_pp::period field.
A truncated value of zero can reach netc_timer_set_perout_alarm(), where
the local u32 period variable would also be 0, causing a divide-by-zero
in roundup_u64(delta, period) whenever the stime < min_time branch is
taken (which always happens for a start time of {0, 0}).
Additionally, netc_timer_enable_periodic_pulse() and
netc_timer_enable_fiper() both compute:
fiper = pp->period - integral_period;
A zero pp->period results in an unsigned wraparound to 0xFFFFFFFD,
mis-programming the FIPER hardware register.
Fix all three issues by capping max_period at NETC_TMR_DEFAULT_FIPER
(0xFFFFFFFF). This ensures that any period_ns passing the range check
fits in a u32 without truncation, so the stored value is always valid
and non-zero. The accepted range is reduced by integral_period ns
(typically only a few nanoseconds), which is negligible in practice.
Fixes: 671e266835 ("ptp: netc: add periodic pulse output support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://patch.msgid.link/20260821032449.1235065-1-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_request_irq(), pcie_enable_tph() is called unconditionally to
enable PCIe TPH when setting up interrupts.
If the NIC hardware or firmware capabilities do not support queue ops,
attempting to enable TPH during bnxt_request_irq() is unnecessary.
As a result a flood of "RX queue restart failed: err=-95" messages is
seen upon boot.
Older NICs (pre-Thor / BCM57414) do not support TPH or queue management.
TPH requires queue management to restart the queue. NICs that support
queue management (with updated FW) all support TPH.
Gate the call to pcie_enable_tph() and setting of bp->tph_mode
behind BNXT_SUPPORTS_QUEUE_API(bp) to ensure TPH is only initialized
on devices capable of supporting queue ops. This prevents a guaranteed
-EOPNOTSUPP error from occurring due to NULL operations.
Fixes: c214410c47 ("bnxt_en: Add TPH support in BNXT driver")
Suggested-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Thomas Walsh <thwalsh@redhat.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260820220544.1240879-1-thwalsh@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first parameter of hwmon_notify_event() is supposed to be the hardware
monitoring device. The bnxt driver calls it with the platform device as
first parameter instead. This API break results in undefined behavior and
may result in a crash.
Pass the hardware monitoring device as parameter instead to fix the
problem.
Fixes: a19b480145 ("bnxt_en: Event handler for Thermal event")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260821044512.663941-1-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a burst of packets is handed down to the driver, the driver defers
the doorbell to the end by setting txr->kick_pending = 1. The normal TX
path handles this, but the SW USO path can miss it if it returns
early.
If bnxt_sw_udp_gso_xmit runs but returns early with NETDEV_TX_BUSY and
txr->kick_pending was previously set to 1, then the TX queue can
stall because the driver wrote some BDs but never wrote the doorbell.
The device won't know to do the TX which would generate the completion
that would wake the queue back up.
Simplify bnxt_sw_udp_gso_xmit to set txr->kick_pending in its success
case and check the flag on return. The added check after
bnxt_sw_udp_gso_xmit returns ensures that any pending doorbells are
written handling both successful USO and any early returns, which
prevents the TX queue stall mentioned above.
This TX queue stall was observed on a production system with a netdev TX
watchdog informing about the queue stall.
Fixes: cc5d90667d ("net: bnxt: Implement software USO")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Damato <joe@dama.to>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260819233213.3673149-1-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cdc_devs[] quirk table special-cases the Mac CDC-NCM private
interface personality only for USB product ID 0x1905.
Some MacBook Pro models (e.g. M1 Max) connected over a
USB4/Thunderbolt 3/4 cable to a host whose Thunderbolt controller
lacks PCIe tunneling support (no NHI function, USB4-only mode)
present themselves with product ID 0x1902 instead,
using the same descriptor layout as 0x1905: a Communications
control interface with zero endpoints (no interrupt/status endpoint)
paired with a CDC Data interface, at
interface numbers 0 and 2.
Because 0x1902 is unmatched, these devices fall through to the
generic cdc_ncm_info driver_info, which sets FLAG_LINK_INTR and
therefore requires an interrupt endpoint on the control interface.
Apple's private NCM interface never provides one, so cdc_ncm_bind()
fails outright:
cdc_ncm 2-1:1.0: bind() failure
cdc_ncm 2-1:1.2: bind() failure
and no network device is created, breaking Ethernet-over-USB4
between the Mac and any USB4 host lacking Thunderbolt PCIe
tunneling.
Add matching entries for 0x1902 alongside the existing 0x1905
ones, reusing apple_private_interface_info as with the other Mac
ID.
Signed-off-by: Mehrdad Afshari <mehrdad@signeen.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov says:
====================
bridge/vxlan: fix reading neigh ha without synchronization
Neigh ha address must be read using the seqlock to get a stable snapshot.
Both the bridge and vxlan read it directly and can see partial updates.
I reproduced both issues with running neigh updates and exercising these
paths in parallel and saw partial addresses, e.g. updating between
neigh A: 02:00:00:00:00:00 neigh B: fe:ff:ff:ff:ff:ff was able to observe
02:00:ff:ff:ff:ff and fe:ff:00:00:00:00 in packets. Noticed this initially
in the bridge, then checked vxlan and its arp/neigh_reduce functions have
the same bug, route_shortcircuit is doing the right thing already.
====================
Link: https://patch.msgid.link/20260818150756.890025-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently arp/neigh_reduce read neigh ha directly which can lead to
partial reads while the neigh is being updated. Use neigh_ha_snapshot to
take a stable snapshot of the address similar to route_shortcircuit which
already does the right thing.
Fixes: e4f67addf1 ("add DOVE extensions for VXLAN")
Fixes: f564f45c45 ("vxlan: add ipv6 proxy support")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260818150756.890025-3-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently neigh ha address is read directly, but that can result in
torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot
to take a stable snapshot of the address.
Fixes: 057658cb33 ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports")
Fixes: ed842faeb2 ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260818150756.890025-2-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_llc_flow_stop() resets a flow struct with a blind memset:
spin_lock_bh(&lgr->llc_flow_lock);
memset(flow, 0, sizeof(*flow));
flow->type = SMC_LLC_FLOW_NONE;
spin_unlock_bh(&lgr->llc_flow_lock);
If flow->qentry is non-NULL at this point the pointer is overwritten without the
allocation being freed, leaking one kmalloc object.
A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set
flow->qentry after the legitimate message has been consumed by the waiter via
smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type
non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that
window the duplicate is stashed into flow->qentry, and then lost when
smc_llc_flow_stop() zeros the struct.
Call smc_llc_flow_qentry_del() inside the lock before the memset.
smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the
normal case where no entry is pending is a no-op.
Fixes: 555da9af82 ("net/smc: add event-based llc_flow framework")
Reviewed-by: Hidayath Khan <hidayath@linux.ibm.com>
Signed-off-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20260818073943.1108383-1-mjambigi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When smc_llc_event_handler() transitions the local LLC flow from
SMC_LLC_FLOW_REQ_ADD_LINK to SMC_LLC_FLOW_ADD_LINK on arrival of an ADD_LINK
request, it calls smc_llc_flow_qentry_set() unconditionally:
if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_REQ_ADD_LINK) {
lgr->llc_flow_lcl.type = SMC_LLC_FLOW_ADD_LINK;
smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry);
...
}
A CONFIRM_LINK or ADD_LINK_CONT arriving while flow->type is
SMC_LLC_FLOW_REQ_ADD_LINK is stashed into flow->qentry via the
SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT handler (which stores into
flow->qentry for any non-NONE flow type). When the subsequent ADD_LINK
arrives, the REQ_ADD_LINK branch overwrites flow->qentry with the new pointer
without first freeing the stashed allocation, leaking one kmalloc object.
The stashed entry has no consumer: smc_llc_wait() is only called from
llc_add_link_work, which is not yet scheduled while the flow type remains
REQ_ADD_LINK. No waiter is sleeping on llc_msg_waiter at this point.
It is safe to unconditionally free any stashed qentry before
the overwrite.
Call smc_llc_flow_qentry_del() before smc_llc_flow_qentry_set() in the
REQ_ADD_LINK branch. smc_llc_flow_qentry_del() already checks flow->qentry
before freeing, so the normal path where no entry is stashed is a no-op.
Fixes: b4ba4652b3 ("net/smc: extend LLC layer for SMC-Rv2")
Reviewed-by: Hidayath Khan <hidayath@linux.ibm.com>
Signed-off-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20260818073107.466506-1-mjambigi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In phylink_inband_caps(), the PCS returned by mac_select_pcs is only
checked if NULL but mac_select_pcs can also return an error pointer.
This can cause a kernel panic as phylink_pcs_inband_caps() only checks
if passed PCS is not NULL and directly dereference ops from the phylink_pcs
struct.
Use the IS_ERR_OR_NULL macro to address both case where the returned
PCS can be NULL or an error pointer and prevent a kernel panic.
Cc: stable@vger.kernel.org
Fixes: df874f9e52 ("net: phylink: add pcs_inband_caps() method")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20260817213009.13924-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Koichiro Den says:
====================
net: ntb_netdev: Fix TX completion and error handling
This small series fixes several TX buffer ownership and queue handling
bugs in ntb_netdev and ntb_transport.
Patch 4 first appeared in my "NTB: Add direct TX/RX using PCI endpoint
DMA" series. Sashiko later reported the same pre-existing leak while
reviewing another series, so I moved the fix here. See:
https://lore.kernel.org/r/20260815032932.151F11F000E9@smtp.kernel.org/
The ntb_transport fixes affect buffer ownership and queue handling in
ntb_netdev, the only in-tree ntb_transport_client implementation, so the
patches need to go in together. I am targeting the net tree for the
series.
====================
Link: https://patch.msgid.link/20260817053519.4135287-1-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ntb_process_tx() handles an oversized buffer by calling tx_handler()
with a NULL data pointer and returning success. ntb_netdev therefore
neither frees the skb in its completion callback nor takes its enqueue
error path, leaking it.
Reject oversized buffers in ntb_transport_tx_enqueue() before acquiring
a queue entry and return -EMSGSIZE. The caller retains ownership of the
buffer, and the preceding netdev patch frees the skb when enqueue
returns this permanent error.
Fixes: fce8a7bb5b ("PCI-Express Non-Transparent Bridge Support")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260817053519.4135287-5-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f195a1a6fe ("ntb: Drop packets when qp link is down") meant to
make ntb_transport_tx_enqueue() drop packets submitted while the QP link
is down, but it only returns 0 without consuming the packet. Zero means
success by this function's contract, so ntb_netdev reports NETDEV_TX_OK
and forgets the skb: nothing queued it, nothing frees it, and it leaks,
one skb for every transmit racing a link-down.
Return -ENOLINK instead, restoring the contract that a non-zero return
leaves the buffer owned by the caller. With the preceding patch,
ntb_netdev frees the skb on non-retryable enqueue failures and returns
NETDEV_TX_OK, so a packet racing with link-down is dropped without leaking
or entering a busy retry loop.
Fixes: f195a1a6fe ("ntb: Drop packets when qp link is down")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260817053519.4135287-4-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, ntb_netdev returns NETDEV_TX_BUSY for every enqueue error. It
also increments the drop and error counters while leaving the skb owned
by the qdisc, and may return BUSY with the subqueue still awake.
Retrying a permanent error cannot succeed either.
The unconditional BUSY return and premature accounting date back to the
initial driver. The error-path queue stop was later removed without
changing that return value. The current flow-control code includes a
resource check, but ntb_netdev does not honor its result before enqueue.
Honor the resource check before enqueue. For -EAGAIN and -EBUSY, stop
the subqueue, arm the existing reaper timer, and return BUSY without
touching the skb. For other errors, free the skb, increment tx_dropped,
and return NETDEV_TX_OK.
Fixes: 548c237c0a ("net: Add support for NTB virtual ethernet device")
Fixes: d723485cb4 ("ntb_netdev: remove tx timeout")
Fixes: e74bfeedad ("NTB: Add flow control to the ntb_netdev")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260817053519.4135287-3-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ntb_tx_copy_callback() invokes the client callback before returning the
entry to tx_free_q. The callback may wake a stopped client queue, only
for the next enqueue to find no local entry and return -EBUSY. The window
is narrow, but the retry is unnecessary.
Save the callback data and length, then return the entry to tx_free_q
before invoking the client. A completion callback then means both the
client buffer and transport entry are ready for reuse.
Fixes: fce8a7bb5b ("PCI-Express Non-Transparent Bridge Support")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260817053519.4135287-2-den@valinux.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current link for 10BASE-T1x MAC-PHY Serial Interface Specification
doesn't work - it returns 404. Update the link to the working one.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260818135958.17311-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_rcv() resolves the transport once per packet and leaves it in
chunk->transport. The lookup reference, or the one sctp_add_backlog() takes
if the socket is owned by userspace, keeps it around until the chunk has
been processed.
An authenticated ASCONF DEL-IP can remove it in the meantime.
sctp_assoc_rm_peer() takes the transport out of the association and calls
sctp_transport_free(), which tags it dead and drops the reference the
association held. There is a window on both paths: the packet can sit on
the socket backlog, and on the direct path the lookup completes before
bh_lock_sock().
The DATA chunk in that packet puts the removed transport back into
asoc->peer.last_data_from. Once the packet is done that reference goes
away and the transport is freed by RCU, so the next delayed SACK carries
the pointer into the SACK chunk and sctp_outq_select_transport() reads the
freed transport's state.
Drop the chunk in sctp_inq_push(), next to the existing rcvr->dead check.
Both paths reach it with the association's socket lock held. The peer
retransmits it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/aoUJHQmxL0LFIMCw@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the
current backlog plus the packet length fits within the queue limit:
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ)
gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ)
sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo)
sch->qstats.backlog + skb->len <= q->limit (plug)
sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len
are unsigned int, so all sums are computed in 32 bits and wrap at 2^32.
Once the true backlog exceeds 4 GiB the wrapped sum becomes small and
admission keeps succeeding, so the queue grows without bound and the kernel
can be driven to OOM.
Promote the sums to u64 so admission stops once the true backlog exceeds
the limit. The limit is u32, so the bounded queue stays below 2^32 and
the stored u32 backlog never wraps.
The bug can only be reproduced as root (albeit with ridiculous setup):
attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB,
leaving the default VQ unconfigured (for gred), and drive >4 GiB of
queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len,
or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32,
admission keeps succeeding, and the queue grows unboundedly to OOM.
Fixes: a3eb95f891 ("net_sched: gred: add TCA_GRED_LIMIT attribute")
Reported-by: vega@nebusec.ai
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260818095927.15901-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect tcp_sendmsg_locked() from mistakenly mixing readable and
unreadable page fragments in the same SKB.
Check that the devmem binding matches the existing SKB's readability.
If a mismatch is detected, avoid collapsing and create a new segment.
Fixes: bd61848900 ("net: devmem: Implement TX path")
Suggested-by: Eric Dumazet <edumazet@google.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Bobby Eshleman <bobbyeshleman@gmail.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20260814191336.187243-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_zerocopy() fails to propagate the unreadable flag when copying
unreadable fragments, causing target skbs to appear as readable memory.
This patch fixes the flag propagation. Additionally, it returns -EFAULT
if readable fragments are mixed with unreadable fragments during
extraction, and returns -EFAULT in openvswitch queue_userspace_packet().
Fixes: 65249feb6b ("net: add support for skbs with unreadable frags")
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Bobby Eshleman <bobbyeshleman@gmail.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Aaron Conole <aconole@redhat.com>
Cc: Eelco Chaudron <echaudro@redhat.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260814191336.187243-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AF_PACKET TX_RING skbs keep a raw pointer to their ring frame. The skb
page references preserve page-backed ring blocks after pg_vec is freed,
but they do not preserve a vmalloc mapping.
tpacket_destruct_skb() currently drops the pending reference before
writing the timestamp and TP_STATUS_AVAILABLE to the frame. Move the
decrement after those stores. The smp_wmb() in __packet_set_status()
orders the frame stores before the decrement.
Also recheck pending TX frames under pg_vec_lock before non-closing
ring replacement, so a racing send cannot add a pending skb between
the initial check and the ring swap.
Ring allocation can produce a mixture of page-backed and vmalloc-backed
blocks. Allocate deferred-work storage during TX ring setup when the
first vmalloc-backed block is encountered, and keep its pointer in the
pg_vec allocation header. If allocation fails, return -ENOMEM from ring
setup. On socket close, a non-NULL pointer identifies a vmalloc-backed
vector without a scan. If TX skbs remain, defer the whole vector to
system_long_wq.
After pg_vec is detached, a late destructor can skip the pending
decrement. Use socket write-memory accounting as the deferred lifetime
gate instead: an skb remains charged through its final sock_wfree(),
after all ring-frame accesses. The delayed work retains a socket
reference and reschedules itself until no TX skbs remain.
Move pending_refcnt release to packet_sock_destruct() so late skb
destructors and deferred cleanup can safely use it after
packet_release(). Page-backed teardown remains synchronous, and no lock
is added to the TX completion hot path.
Fixes: b013840810 ("packet: use percpu mmap tx frame pending refcount")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/20260721015824.45829-1-kylebot@openai.com/
Suggested-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Link: https://patch.msgid.link/20260816235646.76500-1-kylebot@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Abhijit Gangurde says:
====================
Extend the net/ionic firmware identity structure to expose
the rcq_sign_bit field from the RDMA LIF identity.
* 'ionic_rcq_shared' of https://github.com/abhijitG-xlnx/linux:
net: ionic: Fetch RCQ sign bit from firmware
====================
Link: https://patch.msgid.link/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Toggling hardware VLAN TX offload (NETIF_F_HW_VLAN_CTAG_TX or
NETIF_F_HW_VLAN_STAG_TX) on a lower device invokes vlan_transfer_features(),
which dynamically changed vlandev->hard_header_len.
This causes two issues:
1. Lockless TX paths (e.g. packet_snd in af_packet.c, ip6_finish_output2)
read dev->hard_header_len without holding RTNL lock. Mutating
hard_header_len dynamically under RTNL creates a data race where upper
layers reserve insufficient headroom based on a stale hard_header_len,
resulting in skb_under_panic when vlan_dev_hard_header() is called.
2. In addition, vlan_transfer_features() updated hard_header_len without
updating header_ops, causing a mismatch between allocated headroom
and header creation.
Always setting dev->hard_header_len = real_dev->hard_header_len and
dev->needed_headroom = real_dev->needed_headroom + VLAN_HLEN unconditionally
ensures:
- dev->hard_header_len remains 100% static and immutable at real_dev->hard_header_len,
eliminating all dynamic runtime updates and data races on hard_header_len.
- Upper layers allocating skbs via LL_RESERVED_SPACE() will always reserve
sufficient headroom for software VLAN tag insertion (real_dev->hard_header_len +
real_dev->needed_headroom + VLAN_HLEN).
- vlandev inherits real_dev->needed_tailroom so underlying trailer/padding/ICV
requirements are honored.
- AF_PACKET SOCK_RAW network header offsets remain correctly aligned at
real_dev->hard_header_len.
- vlan_header_ops is used unconditionally.
Note to stable teams: Make sure to backport these commits:
e16e960d55 ("ipvlan: inherit needed_headroom and needed_tailroom from phy_dev")
cef51860be ("macvlan: inherit needed_headroom and needed_tailroom from lowerdev")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Tangxin Xie <xietangxin@h-partners.com>
Closes: https://lore.kernel.org/netdev/99d678ae-c7b2-4b44-b534-b8320679deb3@h-partners.com/
Cc: <stable@vger.kernel.org> # 3.19: e16e960d55a4: ipvlan: inherit needed_headroom and needed_tailroom from phy_dev
Cc: <stable@vger.kernel.org> # 3.19: cef51860becd: macvlan: inherit needed_headroom and needed_tailroom from lowerdev
Cc: <stable@vger.kernel.org> # 3.19
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260811085246.2267779-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From: Zhan Xusheng <zhanxusheng@xiaomi.com>
Added by commit f625aa9be8 ("ethtool: provide link mode information with
LINKMODES_GET request") and never used. The same count is computed as
__ETHTOOL_LINK_MODE_MASK_NU32 in net/ethtool/ioctl.c.
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Link: https://patch.msgid.link/20260818023704.125721-1-zhanxusheng@xiaomi.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The network and transport header fields in struct sk_buff are 16-bit
offsets from skb->head, and U16_MAX is reserved as the unset transport
header value. batadv_tvlv_call_handler() sets both fields from a received
multicast TVLV without checking whether the TVLV end is representable.
If the end offset exceeds the field's range, skb_set_transport_header()
truncates it so that the transport header precedes the network header.
The negative difference is then returned by skb_network_header_len() as
a large u32. batadv_mcast_forw_packet() consequently accepts an oversized
multicast tracker and accesses memory beyond the skb data.
Add skb_set_transport_header_careful(), an offset-aware counterpart to
skb_reset_transport_header_careful(), which validates the final
head-relative offset before assigning it. Use the new helper in
batadv_tvlv_call_handler() and reject unrepresentable TVLVs before
setting the network header.
Fixes: 07afe1ba28 ("batman-adv: mcast: implement multicast packet reception and forwarding")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Acked-by: Sven Eckelmann <sven@narfation.org>
Link: https://patch.msgid.link/20260817084955.944189-1-david.lee@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
End.DX4 and End.DT4 decapsulate an IPv4 packet through
decap_and_validate() and send it directly to IPv4 routing. The inner
packet therefore bypasses ip_rcv_core(), which normally clears IPCB
before IPv4 interprets skb->cb.
The skb instead retains IP6CB data from the outer packet. IP6CB and
IPCB use the same skb->cb storage, so IP6CB(skb)->lastopt overlaps
IPCB(skb)->opt.optlen and srr, while IP6CB(skb)->nhoff overlaps rr and
ts.
The sender can make the stale optlen byte nonzero with a valid outer
extension-header chain. The reproducers put an eight-byte Destination
Options header immediately after the 40-byte IPv6 header and before the
Segment Routing Header. ipv6_destopt_rcv() records the sender-controlled
Destination Options offset in both lastopt and nhoff, setting them to
40. On the reproduced little-endian x86-64 kernel, IPv4 therefore sees
optlen = 40 and rr = 40.
Both tcp_v4_save_options() and __ip_options_echo() skip option copying
when optlen is zero. Here optlen is 40, so the TCP SYN path allocates
room for 40 bytes of option data and calls __ip_options_echo(). The
stale rr value makes that function read inner packet byte 41 as the
Record Route option length. The reproducers set that sender-controlled
byte to 255, so __ip_options_echo() copies 255 bytes into the 40-byte
option-data area.
Separate End.DX4 and End.DT4 reproducers on the unpatched v7.2-rc5
kernel both produced:
BUG: KASAN: slab-out-of-bounds in __ip_options_echo()
Write of size 255
The relevant End.DX4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dx4_finish
input_action_end_dx4
The relevant End.DT4 call path is:
__ip_options_echo
tcp_v4_route_req
tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
tcp_v4_do_rcv
tcp_v4_rcv
ip_protocol_deliver_rcu
ip_local_deliver_finish
ip_local_deliver
input_action_end_dt4
tcp_v4_save_options() is inlined into the tcp_v4_route_req() path, so
it does not appear as a separate frame.
When decap_and_validate() handles IPPROTO_IPIP, save the ingress
interface from IP6CB, clear IPCB, and restore the saved value. Doing
this in the common decapsulation path covers End.DX4, End.DT4, and
End.DT46's IPv4 arm.
Use IP6CB(skb)->iif rather than skb->skb_iif. These actions run after
l3mdev processing, which can replace skb_iif with the L3 master;
IP6CB iif still records the receiving interface set at IPv6 ingress.
Fixes: 891ef8dd2a ("ipv6: sr: implement additional seg6local actions")
Cc: stable@vger.kernel.org
Suggested-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260817085839.946321-1-david.lee@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The inetpeer rate limiting system stores peer entries in a Red-Black tree
keyed deterministically on the remote IP address. Because tree lookups walk
the RB-tree using standard lexicographical comparisons (inetpeer_addr_cmp),
an off-path adversary can predict the exact topology of the tree and the
sequence of nodes traversed during lookups (the gc_stack candidate list).
By combining deterministic tree traversal with aggressive garbage collection
(triggered when tree size exceeds inet_peer_threshold), an attacker can
selectively force the eviction of targeted inet_peer nodes. When an evicted
node is subsequently re-created upon receiving a new packet, its rate-limiting
token bucket (rate_tokens, rate_last) is reset to full capacity. This creates
a side-channel primitive allowing off-path attackers to bypass IP-keyed ICMP
rate limits and infer open UDP ports (similar to SAD DNS style attacks).
Mitigate this by randomizing the RB-tree node comparison logic using SipHash
with a secret key (inetpeer_hash_key) initialized via net_get_random_once().
Nodes are ordered in the tree by SipHash(addr, key) rather than raw IP
addresses. Because the secret key is unknown to external entities, the tree
layout and lookup traversal paths are unpredictable to off-path adversaries,
breaking the deterministic eviction gadget.
Cache the computed 64-bit SipHash (hash) in struct inet_peer and compute the
target hash (dhash) once at the beginning of inet_getpeer() to avoid recomputing
SipHash at every step of the RB-tree walk.
Fixes: b145425f26 ("inetpeer: remove AVL implementation in favor of RB tree")
Reported-by: Michael Blunt <michaelbblunt@gmail.com>
Suggested-by: Michael Blunt <michaelbblunt@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260818151213.3953963-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU.
When an ingress multicast packet misses MFC lookup,
ip6mr_cache_unresolved() places the skb onto the unresolved queue,
escaping the receive-side RCU grace period.
If the underlying route is deleted and freed, and the MFC queue is later
resolved with a wrong parent interface, ip6_mr_forward() invokes
ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes
dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab
use-after-free.
Report packets queued to mroute6_sk (a raw socket) and netlink
notifications do not require an attached dst entry.
Fix this by:
1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs
do not hold a dst.
2. Dropping skb_dst before queuing unresolved skbs in
ip6mr_cache_unresolved(), matching the fact that multicast
forwarding resolves outgoing routes anew via ip6_route_output().
Fixes: 67f415dd29 ("ipv6: convert rx data path to not take refcnt on dst")
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Link: https://patch.msgid.link/20260818172755.4083692-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_token_join_cookie_init_state() restores remote_nonce, local_nonce,
backup, join_id, token and msk from the saved cookie entry when rebuilding
the request socket for a MP_JOIN 4th-ACK handled under SYN cookies, but it
does not restore local_id, even though the SYN path saved it.
subflow_ulp_clone() then reads that uninitialized field and stores it as
the joined subflow's address-ID. Because the request-sock slab is
SLAB_TYPESAFE_BY_RCU and not zeroed on allocation, the value is the stale
byte of a previously freed request socket, which an off-path peer can
influence by sending concurrent MP_JOIN SYNs. This corrupts the path
manager's id-based subflow bookkeeping for the connection.
Restore subflow_req->local_id from the cookie entry, as done for the other
fields.
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Cc: stable@vger.kernel.org
Signed-off-by: Harshit Varu <harshitvaru666@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260815115205.197151-1-harshitvaru666@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The unified ROM parser reads directory, product, and data-descriptor fields
from the firmware file. Existing validation forms table and data ends with
unchecked additions and multiplications. Malformed values can wrap before
they are compared with the firmware size. The parser also dereferences
typed pointers at firmware-controlled offsets.
Valid descriptor extents alone are insufficient for the consumers. The
loader reads a fixed-size bootloader regardless of its declared size, the
version parser assumes a 17-byte tail, and a partial final firmware word is
read as a full u64. A truncated image can therefore make the driver read
beyond the firmware allocation during validation or loading.
Replace the pointer-returning parser with bounded range helpers. Validate
table entry sizes, descriptor indices, section ranges, the fixed
bootloader load length, and the version tail before exposing any section.
Read all file fields with unaligned little-endian accessors and assemble a
partial final word from only the bytes that remain. Apply the same range
checks to the legacy image before reading its fixed fields.
Fixes: af19b49152 ("qlcnic: Qlogic ethernet driver for CNA devices")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260816052109.4607-1-pengpeng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I found that trying to read /sys/kernel/debug/ref_tracker/* causes NULL
pointer dereference crash when alloc_netdev_mqs() via unshare() returned
NULL, for commit 9ba74e6c9e ("net: add networking namespace refcount
tracker") added ref_tracker_dir_exit(&net->refcnt_tracker) to only
__put_net() path whereas commit 65b584f536 ("ref_tracker: automatically
register a file in debugfs for a ref_tracker_dir") added
ref_tracker_dir_debugfs() to ref_tracker_dir_init() path.
Since preinit_net() calls ref_tracker_dir_init(&net->refcnt_tracker) and
ref_tracker_dir_init(&net->notrefcnt_tracker), we need to make sure that
both ref_tracker_dir_exit(&net->refcnt_tracker) and
ref_tracker_dir_exit(&net->notrefcnt_tracker) are called before
net_passive_dec() schedules for kmem_cache_free() via net_complete_free().
ref_tracker_dir_exit(&net->refcnt_tracker) is called via put_net() when
ns_ref_put() returned true. But put_net() is not called when copy_net_ns()
fails. Therefore, call ref_tracker_dir_exit() from net_passive_dec() if
put_net() is not yet called.
Link: https://sashiko.dev/#/patchset/b06ce35d-e7bc-47a5-8e0a-e82be7e4dd08%40I-love.SAKURA.ne.jp
Fixes: 9ba74e6c9e ("net: add networking namespace refcount tracker")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://patch.msgid.link/64254d80-9248-466c-8108-95f43bd71117@I-love.SAKURA.ne.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnx2x_init_firmware() frees bp->init_ops, bp->init_data and
bp->init_ops_offsets in its error path without setting them to NULL.
The cleanup function bnx2x_release_firmware() frees the same three
pointers unconditionally, so if init_firmware fails and
release_firmware is later called (e.g. from __bnx2x_remove or through
the function state machine), all three are freed a second time.
Set each pointer to NULL after kfree() in the error path so that the
subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op.
Fixes: 94a78b79cb ("bnx2x: Separated FW from the source.")
Cc: stable@vger.kernel.org
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260815122149.951215-1-yijiangshan@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rt6_multipath_rebalance() calculates the total eligible nexthop weight
in one pass and programs upper bounds in a second pass. Since
RTM_NEWROUTE is RTNL-free, a concurrent
ignore_routes_with_linkdown update can make the first pass return zero
while the second sees an eligible nexthop, causing
rt6_upper_bound_set() to divide by zero.
UBSAN: division-overflow in net/ipv6/route.c:4845:17
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
rt6_upper_bound_set() net/ipv6/route.c:4845
rt6_multipath_rebalance()
fib6_add_rt2node()
ip6_route_multipath_add()
inet6_rtm_newroute()
Skip upper-bound calculation when the first pass reports a zero total.
This respects the lock-free performance considerations here and solves
insecure scenarios.
Fixes: bd11ff421d ("ipv6: Get rid of RTNL for SIOCDELRT and RTM_DELROUTE.")
Reported-by: AutonomousCodeSecurity@microsoft.com
Reported-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reported-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260817013237.2797-1-blbllhy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In netdevsim, receive queues (struct nsim_rq) embed their own struct
napi_struct. When queue reset is performed (e.g. via queue_reset
debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq,
and nsim_queue_mem_free() later deletes and frees the old one.
However, nsim_queue_start() failed to update the queue-to-NAPI mapping
via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to
point to the old NAPI struct. After the old queue was freed, a subsequent
queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN
slab-use-after-free read in nla_put_napi_id() when accessing
rxq->napi->napi_id.
Fix this by calling netif_queue_set_napi() in nsim_queue_start() to
associate the new NAPI with the RX queue, and clear the association
with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown.
Fixes: 5bc8e8dbef ("netdevsim: add queue management API support")
Reported-by: syzbot+483a6efbc4882c1201ee@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a82c3d4.f7a79266.2f965f.0024.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260817082511.2300402-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mctp_route_lookup() uses rt->dev without holding a reference on it.
mctp_route_lookup_single() returns the route under RCU only, so the
route's device can be torn down concurrently: mctp_dev_put() drops the
last reference and synchronously kfree()s mdev->addrs. mctp_dev_saddr()
then reads rt->dev->addrs[0], giving a use-after-free reachable by an
unprivileged local AF_MCTP user on the receive/forwarding path (no
CAP_NET_RAW required):
BUG: KASAN: slab-use-after-free in mctp_route_lookup
Read of size 1 at addr ... by task mctp_uaf/...
mctp_route_lookup
mctp_pkttype_receive
Freed by task ...:
kfree
mctp_dev_put
mctp_dev_notify
In the same window mctp_dst_from_route() -> mctp_dev_hold() also
increments a refcount that has already reached zero
("refcount_t: addition on 0 ... mctp_dev_hold").
This reintroduces the use-after-free class of CVE-2023-3439: the source
address lookup was moved ahead of the point where the destination takes
its device reference.
Take a reference with refcount_inc_not_zero() before touching rt->dev,
skip a device that is already dead, and drop the reference once the
destination has taken its own.
Fixes: 22cb45afd2 ("net: mctp: perform source address lookups when we populate our dst")
Cc: stable@vger.kernel.org
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Link: https://patch.msgid.link/20260813022102.2792032-1-qwe.aldo@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipa_remove() takes a runtime PM reference before accessing IPA hardware
during teardown. If a concurrent modem start or stop keeps
ipa_modem_stop() busy across both attempts, the callback intentionally
returns without releasing the remaining resources because proceeding
with teardown could crash. That return also skips the matching
pm_runtime_put_noidle(), leaving the callback's usage-count reference
held.
Drop only this runtime PM reference before returning.
pm_runtime_put_noidle() does not request an idle transition, so the
hardware and resources retained on this exceptional path remain
untouched while the usage count stays balanced.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: 923a6b6984 ("net: ipa: get clock in ipa_probe()")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260815151737.3758320-1-ruoyuw560@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
