Add checks in the APIC bus clock test to verify that querying
KVM_CAP_X86_APIC_BUS_CYCLES_NS on the VM after changing the frequency
returns the VM's actual APIC cycle length, not KVM's default. For
giggles, verify that KVM still returns its default frequency for the
system-scoped check.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260522173526.3539407-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM_CAP_X86_APIC_BUS_CYCLES_NS is queried on a specific VM, return the
VM's configured APIC bus frequency, not KVM's default. Aside from the fact
that returning the default frequency is blatantly wrong if userspace has
changed the frequency, returning the configured frequency means userspace
can blindly trust the result, e.g. when filling PV CPUID information that
communicates the APIC bus frequency to the guest.
Fixes: 6fef518594 ("KVM: x86: Add a capability to configure bus frequency for APIC timer")
Reported-by: David Woodhouse <dwmw2@infradead.org>
Closes: https://lore.kernel.org/all/ab84153e33fbe7c25667f595c56b310d4d5a93ef.camel@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260522173526.3539407-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
<bits/endian.h> is a glibc-internal header that explicitly states it
should never be included directly:
#error "Never use <bits/endian.h> directly; include <endian.h> instead."
Replace it with the correct public header <endian.h> which works on
all C libraries including musl. Building KVM selftests with musl-gcc
fails with:
lib/elf.c:10:10: fatal error: bits/endian.h: No such file or directory
Fixes: 6089ae0bd5 ("kvm: selftests: add sync_regs_test")
Signed-off-by: Hisam Mehboob <hisamshar@gmail.com>
Message-ID: <20260409164020.1575176-4-hisamshar@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix invalid HVA warning in steal-time recording
- Return SBI_ERR_FAILURE to guest upon OOM in pmu_event_info()
and pmu_snapshot_set_shmem()
- Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
- Fix sign extension of value for MMIO loads
-----BEGIN PGP SIGNATURE-----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=S4B4
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-fixes-7.1-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 7.1, take #1
- Fix invalid HVA warning in steal-time recording
- Return SBI_ERR_FAILURE to guest upon OOM in pmu_event_info()
and pmu_snapshot_set_shmem()
- Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler
- Fix sign extension of value for MMIO loads
Fix some memory issues and some hangs in vSIE.
-----BEGIN PGP SIGNATURE-----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=Pewa
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-7.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: some vSIE and UCONTROL fixes
Fix some memory issues and some hangs in vSIE.
- Fix ITS EventID sanitisation when restoring an interrupt translation
table.
- Fix PPI memory leak when failing to initialise a vcpu.
- Correctly return an error when the validation of a hypervisor trace
descriptor fails, and limit this validation to protected mode only.
-----BEGIN PGP SIGNATURE-----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=ZZ/v
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.1, take #3
- Fix ITS EventID sanitisation when restoring an interrupt translation
table.
- Fix PPI memory leak when failing to initialise a vcpu.
- Correctly return an error when the validation of a hypervisor trace
descriptor fails, and limit this validation to protected mode only.
In case of memory pressure, it's possible that a guest page gets freed
and then almost immediately reused by the guest. If CMMA is enabled,
_essa_clear_cbrl() will discard all pages that are either unused or
zero. If a discarded page is reused before _essa_clear_cbrl() is called,
and the pgste.zero bit is not cleared, the page will be discarded
despite not being unused.
When calling _gmap_ptep_xchg(), always clear the pgste.zero bit. This
prevents the page from being accidentally discarded when not unused.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The address passed to the gmap rmap was not being masked. As a
consequence several different (but functionally equivalent) rmap
entries were being created for each shadowed table.
Fix this by properly masking the address depending on the table level.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
In some cases (i.e. under extreme memory pressure on the host),
attempting to shadow memory will result in the same memory being
unshadowed, causing a loop.
Add a PGSTE bit to distinguish between shadowed memory and shadowed DAT
tables, fix the unshadowing logic in _gmap_ptep_xchg() to prevent
unnecessary unshadowing and perform better checks.
Also fix the unshadowing logic in _gmap_crstep_xchg_atomic() which did
not unshadow properly when the large page would become unprotected.
Opportunistically add a check in gmap_protect_rmap() to make sure it
won't be called with level == TABLE_TYPE_PAGE_TABLE.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fix a memory leak that can happen if gmap_ucas_map_one() or
kvm_s390_mmu_cache_topup() return error values.
Also fix a similar issue in gmap_set_limit().
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Reported-by: Jiaxin Fan <jiaxin.fan@ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
When performing a partial unshadowing, the rmap was being leaked.
Add the missing kfree().
Fixes: a2c17f9270 ("KVM: s390: New gmap code")
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Current release - fix to a fix:
- Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
- vsock/virtio: relax the recently added memory limit a little
Current release - regressions:
- IB/IPoIB: make sure IB drivers always use async set_rx_mode since
some (mlx5) are now required to use it due to locking changes
Previous releases - regressions:
- udp: fix UDP length on last GSO_PARTIAL segment
- af_unix: fix UAF read of tail->len in unix_stream_data_wait()
- tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
- mlx5e: fix unlocked writing to ICOSQ, breaking AF_XDP
Previous releases - always broken:
- tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
- ipv4: raw: reject IP_HDRINCL packets with ihl < 5
- Bluetooth: a lot of locking and concurrency fixes (as always)
- batman-adv (mesh wireless networking): a lot of random fixes
for issues reported by security researchers and Sashiko
- netfilter: same thing, a lot of small security-ish fixes
all over the place, nothing really stands out
Misc:
- bring back the old 3c509 driver, Maciej wants to maintain it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ei7U
-----END PGP SIGNATURE-----
Merge tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, wireless and netfilter.
Craziness continues with no end in sight. Even discounting the driver
revert this is a pretty huge PR for standards of the previous era. I'd
speculate - we haven't seen the worst of it, yet. Good news, I guess,
is that so far we haven't seen many (any?) cases of "AI reported a
bug, we fixed it and a real user regressed".
Current release - fix to a fix:
- Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
- vsock/virtio: relax the recently added memory limit a little
Current release - regressions:
- IB/IPoIB: make sure IB drivers always use async set_rx_mode since
some (mlx5) are now required to use it due to locking changes
Previous releases - regressions:
- udp: fix UDP length on last GSO_PARTIAL segment
- af_unix: fix UAF read of tail->len in unix_stream_data_wait()
- tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
- mlx5e: fix unlocked writing to ICOSQ, breaking AF_XDP
Previous releases - always broken:
- tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
- ipv4: raw: reject IP_HDRINCL packets with ihl < 5
- Bluetooth: a lot of locking and concurrency fixes (as always)
- batman-adv (mesh wireless networking): a lot of random fixes for
issues reported by security researchers and Sashiko
- netfilter: same thing, a lot of small security-ish fixes all over
the place, nothing really stands out
Misc:
- bring back the old 3c509 driver, Maciej wants to maintain it"
* tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (187 commits)
net: enetc: avoid VF->PF mailbox timeout during SR-IOV teardown
net: enetc: fix init and teardown order to prevent use of unsafe resources
net: enetc: fix unbounded loop and interrupt handling in VF-to-PF messaging
net: enetc: fix DMA write to freed memory in enetc_msg_free_mbx()
net: enetc: fix race condition in VF MAC address configuration
net: enetc: fix TOCTOU race and validate VF MAC address
net: enetc: add ratelimiting to VF mailbox error messages
net: enetc: fix missing error code when pf->vf_state allocation fails
net: enetc: fix incorrect mailbox message status returned to VFs
net: bridge: prevent too big nested attributes in br_fill_linkxstats()
l2tp: use list_del_rcu in l2tp_session_unhash
net: bcmgenet: keep RBUF EEE/PM disabled
ethernet: 3c509: Fix most coding style issues
ethernet: 3c509: Update documentation to match MAINTAINERS
ethernet: 3c509: Add GPL 2.0 SPDX license identifier
ethernet: 3c509: Fix AUI transceiver type selection
Revert "drivers: net: 3com: 3c509: Remove this driver"
tools: ynl: support listening on all nsids
net: gro: don't merge zcopy skbs
pds_core: ensure null-termination for firmware version strings
...
setup where many RBD devices are frequently mapped and unmapped, marked
for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmoPOcUTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi6yvB/9+hm+IHQK1gib4gCHOPgq9cD1gj7j8
oegjSmO0tIn3nP1K6wqQfTFnYkE6F37+dRqZTXOUjzi3NlefNJDnxwt9fymp2Y6S
DEobTnRgXSKMxJQ4+cu7jphgbJC/OKYZ+fxJRrKI4hlgZOfQwpvUfQczZZgjWJRz
WqJnSKLoF2k6JDgvokcmt1nyyQ7TrpPRB+6Jz2ATRtG0oxEzp1EN++FtiaRzn1mx
e0WgCBZV/AEFey2YG+Zyhrrg+1nUDWrZI3NgIZz5Q5WU4q/8zF7S9qbNeBQVdzKJ
aZFLxOdQvuRGbLs+g8f6dOMMlDSLnKl2rN2AAzcfwXcmmSQILqLH+ycp
=+cb7
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-7.1-rc5' of https://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for an 'rbd unmap' race condition which popped up on a
production setup where many RBD devices are frequently mapped and
unmapped, marked for stable"
* tag 'ceph-for-7.1-rc5' of https://github.com/ceph/ceph-client:
rbd: eliminate a race in lock_dwork draining on unmap
- Fix reporting MISSED EVENTS in trace iterator
When the "trace" file is read with tracing enabled, if the writer
were to pass the iterator reader, it resets, sets a "missed_events"
flag and continues. The tracing output checks for missed events and
if there are some, it prints out "[LOST EVENTS]" to let the user
know events were dropped.
But the clearing of the missed_events happened when the tracing system
queried the ring buffer iterator about missed events. This was premature
as the ring buffer is per CPU, and the tracing code reads all the
CPU buffers and checks for missed events when it is read. If the
CPU iterator that had missed events isn't printed next, the output
for the LOST EVENTS is lost.
Clear the missed_events flag when the iterator moves to the next event
and not when the missed_events flag is queried. Also clear it on reset.
- Flush and stop the persistent ring buffer on panic
On panic the persistent ring buffer is used to debug what caused the
panic. But on some architectures, it requires flushing the memory
from cache, otherwise, the ring buffer persistent memory may not have
the last events and this could also cause the ring buffer to be
corrupted on the next boot.
- Fix nr_subbufs initialization in simple_ring_buffer_init_mm
The remote simple ring buffer meta data nr_subbufs is initialized
too early and gets cleared later on, making it zero and not reflect
the actual number of sub-buffers.
- Fix unload_page for simple_ring_buffer init rollback
On error, the pages loaded need to be unloaded. To unload a page
it is expected that: page = load_page(va); -> unload_page(page).
But the code was doing: unload_page(va) and not unload_page(page).
- Create output file from cmd_check_undefined
The check for undefined symbols checks if the file *.o.checked exists
and if so it skips doing the work. But the *.o.checked file never
was created making every build do the work even when it was already
done previously.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCag8l7BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qga3AQDkyh7V4T+fxY5gc5jSKVx5U9bRAMpJ
3GWGNCY9TGUyewEApUNO5MVGvXttyc1ONPHuBcShynj3resJk90sk491kw0=
=aY8d
-----END PGP SIGNATURE-----
Merge tag 'trace-ringbuffer-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fixes from Steven Rostedt:
- Fix reporting MISSED EVENTS in trace iterator
When the "trace" file is read with tracing enabled, if the writer
were to pass the iterator reader, it resets, sets a "missed_events"
flag and continues. The tracing output checks for missed events and
if there are some, it prints out "[LOST EVENTS]" to let the user know
events were dropped.
But the clearing of the missed_events happened when the tracing
system queried the ring buffer iterator about missed events. This was
premature as the ring buffer is per CPU, and the tracing code reads
all the CPU buffers and checks for missed events when it is read. If
the CPU iterator that had missed events isn't printed next, the
output for the LOST EVENTS is lost.
Clear the missed_events flag when the iterator moves to the next
event and not when the missed_events flag is queried. Also clear it
on reset.
- Flush and stop the persistent ring buffer on panic
On panic the persistent ring buffer is used to debug what caused the
panic. But on some architectures, it requires flushing the memory
from cache, otherwise, the ring buffer persistent memory may not have
the last events and this could also cause the ring buffer to be
corrupted on the next boot.
- Fix nr_subbufs initialization in simple_ring_buffer_init_mm
The remote simple ring buffer meta data nr_subbufs is initialized too
early and gets cleared later on, making it zero and not reflect the
actual number of sub-buffers.
- Fix unload_page for simple_ring_buffer init rollback
On error, the pages loaded need to be unloaded. To unload a page it
is expected that: page = load_page(va); -> unload_page(page). But the
code was doing: unload_page(va) and not unload_page(page).
- Create output file from cmd_check_undefined
The check for undefined symbols checks if the file *.o.checked exists
and if so it skips doing the work. But the *.o.checked file never was
created making every build do the work even when it was already done
previously.
* tag 'trace-ringbuffer-v7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Create output file from cmd_check_undefined
tracing: Fix unload_page for simple_ring_buffer init rollback
tracing: Fix nr_subbufs initialization in simple_ring_buffer_init_mm()
ring-buffer: Flush and stop persistent ring buffer on panic
ring-buffer: Fix reporting of missed events in iterator
- cfg80211/mac80211:
- various security(-ish) fixes
- fix A-MSDU subframe handling
- fix multi-link element parsing
- ath10: avoid sending commands to dead device
- ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
- ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
- iwlwifi:
- fix TSO segmentation explosion
- don't TX to dead device
- fix warning in WoWLAN
- fix TX rates on old devices
- disconnect on beacon loss only if also no other traffic
- fill NULL-ptr deref
- fix STEP_URM hardware access
-----BEGIN PGP SIGNATURE-----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=vzwG
-----END PGP SIGNATURE-----
Merge tag 'wireless-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a few more updates:
- cfg80211/mac80211:
- various security(-ish) fixes
- fix A-MSDU subframe handling
- fix multi-link element parsing
- ath10: avoid sending commands to dead device
- ath11k:
- fix WMI buffer leaks on error conditions
- fix UAF in RX MSDU coalesce path
- allow peer ID 0 on RX path (legal for mobile devices)
- reinitialize shared SRNG pointers on restart
- ath12k:
- fix 20 MHz-only parsing of EHT-MCS map
- iwlwifi:
- fix TSO segmentation explosion
- don't TX to dead device
- fix warning in WoWLAN
- fix TX rates on old devices
- disconnect on beacon loss only if also no other traffic
- fill NULL-ptr deref
- fix STEP_URM hardware access
* tag 'wireless-2026-05-21' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (24 commits)
wifi: cfg80211: wext: validate chandef in monitor mode
wifi: mac80211: consume only present negotiated TTLM maps
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
wifi: mac80211: fix multi-link element inheritance
wifi: mac80211: fix MLE defragmentation
wifi: mac80211: don't override max_amsdu_subframes
wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs
wifi: ath12k: fix EHT TX MCS limitation due to wrong 20 MHz-only parsing
wifi: ath11k: clear shared SRNG pointer state on restart
wifi: ath11k: fix use after free in ath11k_dp_rx_msdu_coalesce()
wifi: ath11k: fix peer resolution on rx path when peer_id=0
wifi: iwlwifi: mld: disconnect only after 6 beacons without Rx
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o BSS vif
wifi: iwlwifi: use correct function to read STEP_URM register
wifi: iwlwifi: mvm: fix driver-set TX rates on old devices
wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it
wifi: iwlwifi: mld: stop TX during firmware restart
wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled
wifi: ath10k: skip WMI and beacon transmission when device is wedged
...
====================
Link: https://patch.msgid.link/20260521152903.374070-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang says:
====================
net: enetc: SR-IOV robustness and security fixes
This patch series addresses a number of robustness, security, and
correctness issues in the ENETC driver's SR-IOV subsystem, focusing
primarily on the VF-to-PF mailbox communication path.
The series can be grouped into the following categories:
1. DoS and security fixes:
- Prevent an unbounded loop DoS in the VF-to-PF message handler,
which could be triggered by a malicious or misbehaving VF.
- Fix a TOCTOU (Time-of-Check-Time-of-Use) race and add proper
validation of VF MAC addresses to prevent spoofing or invalid
configuration from being applied.
2. Race condition fixes:
- Fix a race condition in VF MAC address configuration that could
lead to inconsistent state between the VF request and PF
application.
- Fix a race condition during SR-IOV teardown that could cause
VF->PF mailbox operations to time out, resulting in unnecessary
errors during shutdown.
3. Memory safety fixes:
- Fix a DMA write to freed memory in enetc_msg_free_mbx(), which
could cause silent memory corruption or system instability.
4. Error handling and initialization fixes:
- Fix missing error code propagation when pf->vf_state allocation
fails, ensuring callers receive a proper errno instead of
succeeding silently.
- Fix incorrect mailbox message status values returned to VFs,
which could cause VFs to misinterpret PF responses.
- Fix initialization order to prevent the use of uninitialized
resources during driver probe, which could cause undefined
behavior on certain configurations.
5. Diagnostics improvement:
- Add rate limiting to VF mailbox error messages to prevent log
flooding in the presence of a misbehaving VF.
These fixes improve the overall stability and security of the ENETC
SR-IOV implementation, particularly in multi-tenant environments where
VFs may be assigned to untrusted guests.
====================
Link: https://patch.msgid.link/20260520064421.91569-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During SR-IOV teardown, enetc_msg_psi_free() disables the MR interrupt
before pci_disable_sriov() removes the VFs. If a VF sends a mailbox
message during this window, the PF cannot receive it, causing the VF to
timeout waiting for a reply.
Since the timeout occurs during SR-IOV teardown when the VF is about to
be removed anyway, it has no functional impact on operation. However,
more messages will be added in the future, some visible error logs may
confuse users. So fix it by calling pci_disable_sriov() first to remove
all VFs, then safely clean up the mailbox resources. This eliminates the
race window where VFs could send messages to an unresponsive PF.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-10-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported a potential issue in enetc_msg_psi_init() where the IRQ
handler is registered before DMA resources are fully initialized [1].
The current initialization sequence is:
1. request_irq(enetc_msg_psi_msix) <- IRQ handler registered
2. INIT_WORK(&pf->msg_task, ...) <- work_struct initialized
3. enetc_msg_alloc_mbx() <- mailbox DMA allocated
This ordering is unsafe because if a spurious interrupt or pending
interrupt from a previous device state fires immediately after
request_irq() returns, the registered ISR enetc_msg_psi_msix() will
execute and unconditionally call:
schedule_work(&pf->msg_task)
At this point, pf->msg_task has not been initialized by INIT_WORK(), so
the work_struct contains garbage values in its internal linked list
pointers (work_struct->entry). Passing an uninitialized work_struct to
schedule_work() could corrupt the kernel's workqueue linked lists,
potentially leading to:
- Kernel panic in __queue_work()
- Memory corruption in workqueue data structures
- System deadlock or undefined behavior
Additionally, even if the work_struct was initialized, the mailbox DMA
buffers (pf->rxmsg[]) may not yet be allocated when the work handler
enetc_msg_task() runs, resulting in NULL pointer dereference.
Fix by reordering the initialization sequence to ensure all resources are
properly initialized before the interrupt handler can execute:
1. enetc_msg_alloc_mbx() <- Allocate all mailboxes
2. INIT_WORK(&pf->msg_task, ...) <- Initialize work first
3. request_irq(enetc_msg_psi_msix) <- Register IRQ last
4. Configure hardware & enable MR interrupts
This guarantees that when enetc_msg_psi_msix() runs:
- pf->msg_task is properly initialized (safe for schedule_work)
- pf->rxmsg[] buffers are allocated (safe for work handler access)
- Hardware is configured appropriately
As the inverse of enetc_msg_psi_init(), enetc_msg_psi_free() also has
similar problems. For example, if a pending interrupt fires between
enetc_msg_free_mbx() and free_irq(), the ISR enetc_msg_psi_msix() may
schedule the work handler again via schedule_work(), which could then
access already-freed DMA buffers (pf->rxmsg[]), leading to use-after-free
and potential memory corruption.
Therefore, the order of enetc_msg_psi_free() is adjusted:
1. enetc_msg_disable_mr_int() <- Stop new interrupts first
2. free_irq() <- Ensure no IRQ handler can run
3. cancel_work_sync() <- Wait for any pending work
4. enetc_msg_disable_mr_int() <- Re-disable in case work
re-enabled it
5. enetc_msg_free_mbx() <- Safe to free DMA buffers now
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The enetc_msg_task() function has several issues that need to be addressed:
1. Unbounded loop causing potential DoS:
enetc_msg_task() processes VF-to-PF mailbox messages in an unbounded
for(;;) loop that keeps polling ENETC_PSIMSGRR until no MR bits are set.
A malicious guest VM can exploit this by continuously sending messages at
a high rate - immediately sending a new message as soon as the PF
acknowledges the previous one. Since the worker thread never yields or
enforces a processing budget, the mr_mask check frequently evaluates to
non-zero, causing the PF to spin indefinitely and starving other tasks.
Fix this by replacing the unbounded loop with a single snapshot read at
task entry. The task processes only the VFs whose MR bits were set at
that point, then re-enables message interrupts before returning. This
bounds work per invocation to at most num_vfs iterations. No messages are
lost because the message interrupt is disabled in enetc_msg_psi_msix()
before scheduling enetc_msg_task(), so any new messages arriving during
processing will trigger a fresh interrupt once re-enabled, scheduling
another task invocation.
2. Write order of ENETC_PSIIDR and ENETC_PSIMSGRR:
Both ENETC_PSIIDR and ENETC_PSIMSGRR contain MR bits indicating messages
have been received from VSIs, but only ENETC_PSIIDR trigger the CPU
interrupt. Previously, ENETC_PSIMSGRR was written before ENETC_PSIIDR.
Writing ENETC_PSIMSGRR returns the message code to the VSI in its upper
16 bits, signaling to the VF that message processing is complete and it
may send the next message. If the VF sends a new message before
ENETC_PSIIDR is written, the subsequent w1c write to ENETC_PSIIDR would
inadvertently clear the MR bit set by the new message, causing the
interrupt to be lost and the new message to go unprocessed.
Therefore, write ENETC_PSIIDR first to clear the interrupt source, then
write ENETC_PSIMSGRR to acknowledge the message to the VSI.
3. Check both ENETC_PSIMSGRR and ENETC_PSIIDR for mr_status:
The write order change above introduces a potential race: if a VF sends
a new message in the window between the ENETC_PSIIDR w1c and the
ENETC_PSIMSGRR w1c, the ENETC_PSIMSGRR MR bit for the new message may
not be set. If mr_status was derived solely from ENETC_PSIMSGRR, this
message would never be detected despite ENETC_PSIIDR retaining its MR
bit, leading to an unacknowledged interrupt storm.
Fix this by computing mr_status as the union of both ENETC_PSIMSGRR and
ENETC_PSIIDR MR bits, ensuring all pending messages are detected
regardless of which register reflects the new message state.
Additionally, rename the per-register MR macros (ENETC_PSI*_MR_MASK,
ENETC_PSI*_MR) to register-agnostic names (ENETC_PSIMR_MASK,
ENETC_PSIMR_BIT) since the MR bit layout is shared across ENETC_PSIMSGRR,
ENETC_PSIIER, and ENETC_PSIIDR. Make the mask macro dynamic based on
the actual number of active VFs rather than hardcoded.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260520064421.91569-8-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The teardown sequence in enetc_msg_psi_free() frees the DMA buffer before
clearing the device's DMA address registers. If a VF sends a message or a
pending DMA transfer completes within this window, the hardware will
perform a DMA write into the kernel memory that has already been returned
to the allocator.
The result is silent memory corruption that can affect arbitrary kernel
data structures. Therefore, clear the DMA address registers before the
DMA buffer is freed.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-7-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported a potential race condition between the VF message
handler and administrative VF MAC configuration from the host [1].
The VF message handler (enetc_msg_pf_set_vf_primary_mac_addr) runs
asynchronously in a workqueue context and accesses vf_state->flags
without any locking. Concurrently, the host can administratively
change the VF MAC address via enetc_pf_set_vf_mac(), which executes
under RTNL lock and modifies both vf_state->flags and hardware
registers.
This creates two race windows:
1) TOCTOU race on vf_state->flags: The check of ENETC_VF_FLAG_PF_SET_MAC
and subsequent MAC programming are not atomic, allowing the flag state
to change between check and use.
2) Torn MAC address writes: Hardware MAC programming requires multiple
non-atomic register writes (__raw_writel for lower 32 bits and
__raw_writew for upper 16 bits). Concurrent updates from VF mailbox
and PF admin paths can interleave these operations, resulting in a
corrupted MAC address being programmed into the hardware.
Fix by introducing a per-VF mutex to serialize access to vf_state and
hardware MAC register updates. Both enetc_pf_set_vf_mac() and
enetc_msg_pf_set_vf_primary_mac_addr() now acquire this lock before
accessing vf_state->flags or programming the MAC address, ensuring
atomic read-modify-write sequences and preventing register write
interleaving.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported that the PF driver accepts arbitrary MAC address from
from VF mailbox messages without proper validation, creating a security
vulnerability [1].
In enetc_msg_pf_set_vf_primary_mac_addr(), the MAC address is extracted
directly from the message buffer (cmd->mac.sa_data) and programmed into
hardware via pf->ops->set_si_primary_mac() without any validity checks.
A malicious VF can configure a multicast, broadcast, or all-zero MAC
address. Therefore, a validation to check the MAC address provided by VF
is required.
However, simply checking the MAC address is not enough, because it also
has the potential TOCTOU race [2]: The code reads the MAC address from
the DMA buffer to validate it via is_valid_ether_addr(), if validation
passes, reads the same DMA buffer a second time when calling
enetc_pf_set_primary_mac_addr() to program the hardware. A malicious VF
can exploit this window by overwriting the MAC address in the DMA buffer
between the validation check and the hardware programming, bypassing the
validation entirely.
Therefore, allocate a local buffer in enetc_msg_handle_rxmsg() and copy
the message content from the DMA buffer via memcpy() before processing.
This ensures the PF operates on a stable snapshot that the VF cannot
modify.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Link: https://sashiko.dev/#/patchset/20260513103021.2190593-1-wei.fang%40nxp.com#2
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reported that a buggy or malicious guest VM can flood the host
kernel log by repeatedly sending VF-to-PF messages at a high rate,
degrading host performance and hiding important system logs [1].
Fix by replacing dev_err()/dev_warn() with dev_err_ratelimited(),
limiting output to the default kernel ratelimit. This ensures errors are
still logged for debugging while preventing log flooding attacks.
Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com#1
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In enetc_pf_probe(), when the memory allocation for pf->vf_state fails,
the code jumps to the error handling label but the variable 'err' is not
assigned an appropriate error code beforehand. This causes the function
to return 0 (success) on an allocation failure path, misleading the
caller into thinking the probe succeeded. So set err to -ENOMEM before
jumping to the error handling label when the allocation for pf->vf_state
returns NULL.
Fixes: e15c5506dd ("net: enetc: allocate vf_state during PF probes")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two cases where VFs receive an incorrect success status from
the PF mailbox message handler, misleading them into believing their
requests have been fulfilled:
In enetc_msg_handle_rxmsg(), *status is pre-initialized to
ENETC_MSG_CMD_STATUS_OK. When an unsupported command type is received,
the default case only logs an error without updating *status, so it
remains as ENETC_MSG_CMD_STATUS_OK.
In enetc_msg_pf_set_vf_primary_mac_addr(), when the PF has already
assigned a MAC address for the VF (ENETC_VF_FLAG_PF_SET_MAC is set),
the function rejects the request but returns ENETC_MSG_CMD_STATUS_OK
instead of ENETC_MSG_CMD_STATUS_FAIL.
Therefore, correct the status value for the two cases mentioned above.
Fixes: beb74ac878 ("enetc: Add vf to pf messaging support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260520064421.91569-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An unprivileged local user can pin a host CPU indefinitely in
l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on
L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and
L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take
GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace
suffices; on any host that has l2tp_core loaded the trigger is
reachable from a standard `unshare -Urn` sandbox.
l2tp_session_unhash() removes a session from tunnel->session_list
with list_del_init(), but that list is walked by
l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under
rcu_read_lock_bh(). list_del_init() leaves the deleted entry's
next/prev self-pointing; a reader that has loaded the entry and
then advances pos->list.next reads &session->list, container_of()s
back to the same session, and list_for_each_entry_rcu() never
reaches the list head. The CPU stays in strcmp() inside the
walker, with BH and preemption disabled, so RCU grace periods on
the host stall behind it and the wedged thread cannot be killed
(SIGKILL is delivered on syscall return).
Use list_del_rcu() to match the existing list_add_rcu() in
l2tp_session_register(); the deleted session remains visible to
in-flight walkers with consistent next/prev pointers until
kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list
has exactly one list_del_init() call site; the list_del_init
(&session->clist) at l2tp_core.c:533 operates on the per-collision
list, which is not walked under RCU. list_empty(&session->list) is
not used anywhere in net/l2tp/ after the unhash point, so dropping
the post-delete self-init is safe; the fix has no userspace-visible
behavior change.
Fixes: 89b768ec2d ("l2tp: use rcu list add/del when updating lists")
Cc: stable@vger.kernel.org # 6.11+
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260518183447.64078-1-michael.bommarito@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ff-a firmware driver gets 11 individual bugfixes for a number
of issues with robustness to buggy firmware or client implementations.
Another firmware fix address suspend to RAM via PSCI firmware.
The final code change is for the old Arm Integrator reference
platform that recently started exposing an old NULL pointer
dereference bug.
The MAINTAINERS file gets two updates, notably James Tai and Yu-Chun
Lin are stepping up as co-maintainers for the Realtek platform.
The remaining patches are all for devicetree files. Two of these
are for riscv boards, the rest are all for enesas Arm platforms,
addressing build time checking issues as well as minor configuration
problems.
-----BEGIN PGP SIGNATURE-----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=MpIJ
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
- The ff-a firmware driver gets 11 individual bugfixes for a number of
issues with robustness to buggy firmware or client implementations.
Another firmware fix address suspend to RAM via PSCI firmware.
- The final code change is for the old Arm Integrator reference
platform that recently started exposing an old NULL pointer
dereference bug.
- The MAINTAINERS file gets two updates, notably James Tai and Yu-Chun
Lin are stepping up as co-maintainers for the Realtek platform.
- The remaining patches are all for devicetree files. Two of these are
for riscv boards, the rest are all for enesas Arm platforms,
addressing build time checking issues as well as minor configuration
problems.
* tag 'soc-fixes-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
firmware: psci: Set pm_set_resume/suspend_via_firmware() for SYSTEM_SUSPEND
ARM: realtek: MAINTAINERS: Include pin controller drivers
MAINTAINERS: Add maintainers for ARM/REALTEK ARCHITECTURE
ARM: integrator: Fix early initialization
firmware: arm_ffa: Fix sched-recv callback partition lookup
firmware: arm_ffa: Snapshot notifier callbacks under lock
firmware: arm_ffa: Align RxTx buffer size before mapping
firmware: arm_ffa: Validate framework notification message layout
firmware: arm_ffa: Keep framework RX release under lock
firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies
firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0
firmware: arm_ffa: Fix per-vcpu self notifications handling in workqueue
firmware: arm_ffa: Avoid collapsing NPI work from different CPUs
firmware: arm_ffa: Skip free_pages on RX buffer alloc failure
firmware: arm_ffa: Check for NULL FF-A ID table while driver registration
riscv: dts: microchip: fix icicle i2c pinctrl configuration
riscv: dts: starfive: jh7110: Drop CAMSS node
arm64: dts: renesas: r9a09g056: Add #mux-state-cells to usb20phyrst
arm64: dts: renesas: r9a09g057: Add #mux-state-cells to usb2{0,1}phyrst
ARM: dts: renesas: rskrza1: Drop superfluous cells
...
Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX
path on GENET hardware once MAC EEE becomes active. RX traffic stops
flowing while the link stays up and the usual descriptor/RX error
counters remain quiet. In that state the MAC still accepts frames
(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to
DMA, so rx_packets is no longer incremented at the netdev level. On
some boards the corruption ends up as a paging fault in
skb_release_data via bcmgenet_rx_poll on an LPI exit.
Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian
Fainelli on an internal Broadcom 4908-family board with the same crash
signature. RBUF_PM_EN is not publicly documented.
This shows up more often now that phy_support_eee() enables EEE by
default, but it also affects older kernels as soon as TX LPI is
turned on via ethtool, so it is not specific to recent changes.
Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so
the bits stay off across resets. UMAC and TBUF setup is left alone so
TX-side EEE keeps working.
Link: https://github.com/raspberrypi/linux/issues/7304
Fixes: 6ef398ea60 ("net: bcmgenet: add EEE support")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260520184320.652053-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maciej W. Rozycki says:
====================
ethernet: 3c509: Bring driver back and make some fixes
As per the previous discussions[1][2] this patch series brings the 3c509
driver back. Picking up net rather than net-next as I consider it a fix
to accidental removal and so that any downstream users do not suffer from
disruption when using released kernels.
In the course of making the coding style changes requested I have come
across an actual bug in transceiver type selection code, where the old
setting is not masked out before ORing in the new one, causing no change
to be actually made in a requested transition from BNC to AUI. I guess
this code must have been executed exceedingly rarely, as it's always been
wrong ever since it was added in 2.5.42 back in 2002.
Therefore I find it not worth backporting to stable branches, however for
the sake of appropriateness, in case someone downstream does want to have
the fix, I chose to apply it second in the series, right after the actual
revert and before code clean-ups.
The remaining patches of the series should be obvious; see the respective
commit descriptions for details.
[1] "drivers: net: 3com: 3c509: Remove this driver",
<https://lore.kernel.org/r/alpine.DEB.2.21.2604240004280.28583@angie.orcam.me.uk/>.
[2] "MAINTAINERS: Add self for the 3c509 network driver",
<https://lore.kernel.org/r/alpine.DEB.2.21.2604271056460.28583@angie.orcam.me.uk/>.
====================
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201115010.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the driver for our current coding style according to output from
`checkpatch.pl' and manual code review, where no change to binary code
results, as indicated by `objdump -dr'. Exceptions are as follows:
- incomplete reverse xmas tree in set_multicast_list(), as that would
change binary output,
- referring el3_start_xmit() verbatim rather than via `__func__' with
pr_debug(), likewise,
- a bunch of pr_cont() calls, likewise,
- a long udelay() call in el3_netdev_set_ecmd() made under a spinlock,
likewise plus it's not eligible for conversion to a sleep in the first
place,
- a blank line at the start of a block in el3_interrupt(), to improve
readability where the first statement would otherwise visually merge
with the controlling expression of the enclosing `while' statement.
These issues are benign and depending on circumstances may be adressed
with suitable code refactoring later on.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201208280.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There has been apparently a single message only ever publicly posted by
David Ruggiero, back in 2002, which added this documentation piece among
others, and MAINTAINERS was never updated accordingly. It is therefore
doubtful that his maintainer status has actually come into effect. Just
replace the reference then so as not to confuse people.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201207380.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver has landed with Linux 0.99.13k, which was covered by the GNU
General Public License version 2, and no further conditions as to
licensing terms have been specified within the copyright notice included
with the driver itself.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201206370.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The transceiver type is held in bits 15:14 of the Address Configuration
Register, with the values of 0b00, 0b01, and 0b11 denoting TP, AUI, and
BNC types respectively. Therefore switching from BNC to AUI requires
bits to be cleared before setting bit 14 or the setting won't change.
NB this has always been wrong ever since this code was added in 2.5.42.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201205160.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 91f3a27ae9.
Contrary to the assumption stated with the original commit description
this driver is in use and I'm going to maintain it for the foreseeable
future.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2605201204260.1450@angie.orcam.me.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new method ntf_listen_all_nsid() to enable listening on events from
all namespaces. Useful for testing cross-namespace functionality.
recv() replaced with recvmsg() to be able to receive NSID through the
ancillary data.
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260520172317.175168-4-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb_gro_receive() can currently copy frags between the source and GRO
skb, without checking the zerocopy status, and in particular the
SKBFL_MANAGED_FRAG_REFS flag.
When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference
on the pages in shinfo->frags. Appending those frags to another skb's
frags without fixing up the page refcount can lead to UAF.
When either the last skb in the GRO chain (the one we would append
frags to) or the source skb is zerocopy, don't merge the skbs.
Fixes: 753f1ca4e1 ("net: introduce managed frags infrastructure")
Reported-by: Huzaifa Sidhpurwala <huzaifas@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/c3b7f906bbfcbdfd7b4fa9d6c18a438870df85be.1779307748.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver passes fw_version directly to devlink_info_version_stored_put()
without ensuring null-termination. While current firmware null-terminates
these strings, the driver should not rely on this behavior. Add explicit
null-termination to prevent potential issues if firmware behavior changes.
Fixes: 45d76f4929 ("pds_core: set up device and adminq")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260520205842.1486718-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reported by Sashiko:
In ipv6_hop_ioam(), the hdr pointer is initialized to point into the
skb's linear data buffer. Later, the code calls skb_ensure_writable(),
which might reallocate the buffer:
if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len))
goto drop;
/* Trace pointer may have changed */
trace = (struct ioam6_trace_hdr *)(skb_network_header(skb)
+ optoff + sizeof(*hdr));
ioam6_fill_trace_data(skb, ns, trace, true);
ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev),
GFP_ATOMIC, (void *)trace, hdr->opt_len - 2);
If the skb is cloned or lacks sufficient linear headroom,
skb_ensure_writable() will invoke pskb_expand_head(), which reallocates
the skb's data buffer and frees the old one, invalidating pointers to
it. While the code recalculates the trace pointer immediately after the
call to skb_ensure_writable(), it fails to recalculate the hdr pointer.
This patch fixes the above by recalculating the hdr pointer before
passing hdr->opt_len to ioam6_event(), so that we avoid any UaF.
Fixes: f655c78d62 ("net: exthdrs: ioam6: send trace event")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Iurman <justin.iurman@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260520124242.32320-1-justin.iurman@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an
uninitialised on-stack struct sockaddr_storage to userspace via
ifr_hwaddr, but netif_get_mac_address() only writes sa_family and
dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised.
Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a
macvtap chardev returns kernel .text and direct-map pointers, defeating
KASLR.
Initialise ss at declaration.
Fixes: 3b23a32a63 ("net: fix dev_ifsioc_locked() race condition")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260520075736.3415676-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup.
Fixes: fe56b9e6a8 ("qed: Add module with basic common support")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mana_hwc_rx_event_handler(), rx_req_idx is derived from
sge->address in DMA-coherent memory. In Confidential VMs
(SEV-SNP/TDX), this memory is shared unencrypted and HW can modify
WQE contents at any time. No bounds check exists on rx_req_idx,
which can lead to an out-of-bounds access into reqs[].
Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before
using it to index the reqs[] array.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260520051553.857120-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When installing the allmulticast NPC rule, rvu_npc_install_allmulti_entry()
should skip LBK and SDP VFs (only CGX PF/VF may add the entry). The
code combined is_lbk_vf() and is_sdp_vf() with logical AND, which is
never true for a single pcifunc, so the intended early return never ran.
Use logical OR instead.
Cc: Geetha sowjanya <gakula@marvell.com>
Fixes: ae703539f4 ("octeontx2-af: Cleanup loopback device checks")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260520043036.1523798-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__netpoll_send_skb() always transmits through np->dev and queues busy
packets on np->dev->npinfo->txq, but it leaves skb->dev unchanged.
Stacked callers such as DSA and macvlan can reach netpoll with skb->dev
still naming the upper device while np->dev is the lower device that
owns the netpoll state.
If the skb has to be deferred, queue_process() later dequeues it from
the lower device's txq but retries it through skb->dev. That can
re-enter the upper ndo_start_xmit path on an already transformed skb,
and if the upper device disappears before the lower txq drains the
workqueue can dereference a stale skb->dev pointer.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: netpoll enqueue path path B label: upper-device teardown
1. Stacked xmit calls netpoll 1. Teardown unregisters the upper
with lower np->dev and upper net_device while lower npinfo
skb->dev. stays alive.
2. __netpoll_send_skb() uses 2. netdev_release() runs for the
np->dev->npinfo as the txq upper net_device.
owner.
3. Busy transmit queues the skb 3. The lower txq still owns the
on that lower txq with upper deferred skb.
skb->dev.
4. queue_process() drains the 4. queue_process() dereferences
lower txq and reads skb->dev. that stale upper skb->dev.
Normalize skb->dev to np->dev after loading np->dev from the netpoll
instance, before either the direct transmit path or the fallback enqueue.
This keeps the queued skb in the same device and txq domain as the
netpoll state that owns it.
KASAN report as below:
KASAN slab-use-after-free in queue_process+0x7c/0x480
Workqueue: events queue_process
The buggy address belongs to the object at ffff88810906c000 which belongs
to the cache kmalloc-4k of size 4096
The buggy address is located 168 bytes inside of freed 4096-byte region
[ffff88810906c000, ffff88810906d000)
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x620 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x215/0x420 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
queue_process+0x7c/0x480 (net/core/netpoll.c:88)
kasan_check_range+0x10c/0x1c0 (?:?)
__kasan_check_read+0x15/0x20 (?:?)
process_one_work+0x8b7/0x1af0 (kernel/workqueue.c:3200)
assign_work+0x170/0x3f0 (?:?)
worker_thread+0x574/0xf10 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
trace_hardirqs_on+0x2a/0x180 (?:?)
kthread+0x2fc/0x3f0 (?:?)
ret_from_fork+0x58b/0x830 (?:?)
__switch_to+0x58e/0xe90 (?:?)
__switch_to_asm+0x39/0x70 (?:?)
ret_from_fork_asm+0x1a/0x30 (?:?)
Freed by task stack:
kasan_save_stack+0x3d/0x60 (?:?)
kasan_save_track+0x18/0x40 (?:?)
kasan_save_free_info+0x3f/0x60 (?:?)
__kasan_slab_free+0x48/0x70 (?:?)
kfree+0x20e/0x4e0 (?:?)
kvfree+0x31/0x40 (?:?)
netdev_release+0x71/0x90 (net/core/net-sysfs.c:2227)
device_release+0xd2/0x250 (?:?)
kobject_put+0x181/0x4c0 (lib/kobject.c:730)
netdev_run_todo+0x700/0x1000 (net/core/dev.c:11666)
rtnl_dellink+0x396/0xc00 (net/core/rtnetlink.c:3558)
rtnetlink_rcv_msg+0x740/0xc20 (net/core/rtnetlink.c:6897)
netlink_rcv_skb+0x147/0x3a0 (?:?)
rtnetlink_rcv+0x19/0x20 (net/core/rtnetlink.c:7021)
netlink_unicast+0x4d1/0x830 (net/netlink/af_netlink.c:1327)
netlink_sendmsg+0x840/0xe10 (net/netlink/af_netlink.c:1812)
____sys_sendmsg+0x8a7/0xb50 (?:?)
___sys_sendmsg+0x104/0x190 (?:?)
__sys_sendmsg+0x135/0x1d0 (?:?)
__x64_sys_sendmsg+0x7b/0xc0 (?:?)
x64_sys_call+0x205c/0x2130 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Fixes: 5de4a473bd ("netpoll queue cleanup")
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Link: https://patch.msgid.link/20260519104647.3517990-1-rollkingzzc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The memory allocated in ipc_protocol_init() is not freed on the error
paths that follow in ipc_imem_init(). Fix that by calling the
corresponding release function ipc_protocol_deinit() in the error path.
Fixes: 3670970dd8 ("net: iosm: shared memory IPC interface")
Cc: stable@vger.kernel.org
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Link: https://patch.msgid.link/20260519062815.55545-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since I am moving from Pengutronix update my email address for the
ARCNET subsystems to point to my kernel.org address.
Also update .mailmap.
Signed-off-by: Michael Grzeschik <mgr@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Markus Schneider-Pargmann <mail@markussp.com>
Link: https://patch.msgid.link/20260521-maintainer-v1-1-29b5e106682d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We X-out net/bluetooth/ from "NETWORKING [GENERAL]" so that only
the dedicated list is CCed on patches, and networking gets them
once already processed by Luiz. We missed include/net/bluetooth.
Link: https://patch.msgid.link/20260521004151.625049-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
