-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQSl+MghEFFAdY3pYJLMOmT6rpmt0gUCacEVXhMcbWtsQHBlbmd1
dHJvbml4LmRlAAoJEMw6ZPquma3Si58BANpBSZYYe4PcLhowSJdr7KbT3oI3qiZS
lnhk+ubPUWOUAQDzugYr+fUM9VHmCh2qCqsjgn83SzggCr110tzZUtRVBw==
=VPfS
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-7.0-20260323' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-03-23
this is a pull request of 5 patches for net/main.
The first patch is by me and adds missing error handling to the CAN
netlink device configuration code.
Wenyuan Li contributes a patch for the mcp251x drier to add missing
error handling for power enabling in th open and resume functions.
Oliver Hartkopp's patch adds missing atomic access in hot path for the
CAN procfs statistics.
A series by Ali Norouzi and Oliver Hartkopp fix a can-Out-of-Bounds
Heap R/W in the can-gw protocol and a UAF in the CAN isotp protocol.
linux-can-fixes-for-7.0-20260323
* tag 'linux-can-fixes-for-7.0-20260323' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: isotp: fix tx.buf use-after-free in isotp_sendmsg()
can: gw: fix OOB heap access in cgw_csum_crc8_rel()
can: statistics: add missing atomic access in hot path
can: mcp251x: add error handling for power enable in open and resume
can: netlink: can_changelink(): add missing error handling to call can_ctrlmode_changelink()
====================
Link: https://patch.msgid.link/20260323103224.218099-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
cppi5_hdesc_get_psdata() returns a pointer into the CPPI descriptor.
In both emac_rx_packet() and emac_rx_packet_zc(), the descriptor is
freed via k3_cppi_desc_pool_free() before the psdata pointer is used
by emac_rx_timestamp(), which dereferences psdata[0] and psdata[1].
This constitutes a use-after-free on every received packet that goes
through the timestamp path.
Defer the descriptor free until after all accesses through the psdata
pointer are complete. For emac_rx_packet(), move the free into the
requeue label so both early-exit and success paths free the descriptor
after all accesses are done. For emac_rx_packet_zc(), move the free to
the end of the loop body after emac_dispatch_skb_zc() (which calls
emac_rx_timestamp()) has returned.
Fixes: 46eeb90f03 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260320174439.41080-1-devnexen@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a team selftest that sets up:
g0 (gre) -> b0 (bond) -> t0 (team)
and triggers IPv6 traffic on t0. This reproduces the non-Ethernet
header_ops confusion scenario and protects against regressions in stacked
team/bond/gre configurations.
Using this script, the panic reported by syzkaller can be reproduced [1].
After the fix:
# ./non_ether_header_ops.sh
PASS: non-Ethernet header_ops stacking did not crash
[1] https://syzkaller.appspot.com/bug?extid=3d8bc31c45e11450f24c
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260320072139.134249-3-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Similar to commit 950803f725 ("bonding: fix type confusion in
bond_setup_by_slave()") team has the same class of header_ops type
confusion.
For non-Ethernet ports, team_setup_by_port() copies port_dev->header_ops
directly. When the team device later calls dev_hard_header() or
dev_parse_header(), these callbacks can run with the team net_device
instead of the real lower device, so netdev_priv(dev) is interpreted as
the wrong private type and can crash.
The syzbot report shows a crash in bond_header_create(), but the root
cause is in team: the topology is gre -> bond -> team, and team calls
the inherited header_ops with its own net_device instead of the lower
device, so bond_header_create() receives a team device and interprets
netdev_priv() as bonding private data, causing a type confusion crash.
Fix this by introducing team header_ops wrappers for create/parse,
selecting a team port under RCU, and calling the lower device callbacks
with port->dev, so each callback always sees the correct net_device
context.
Also pass the selected lower device to the lower parse callback, so
recursion is bounded in stacked non-Ethernet topologies and parse
callbacks always run with the correct device context.
Fixes: 1d76efe157 ("team: add support for non-ethernet devices")
Reported-by: syzbot+3d8bc31c45e11450f24c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69b46af7.050a0220.36eb34.000e.GAE@google.com/T/
Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260320072139.134249-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo says:
====================
virtio-net: fix for VIRTIO_NET_F_GUEST_HDRLEN
The commit be50da3e9d ("net: virtio_net: implement exact header length
guest feature") introduces support for the VIRTIO_NET_F_GUEST_HDRLEN
feature in virtio-net.
This feature requires virtio-net to set hdr_len to the actual header
length of the packet when transmitting, the number of
bytes from the start of the packet to the beginning of the
transport-layer payload.
However, in practice, hdr_len was being set using skb_headlen(skb),
which is clearly incorrect. This path set fixes that issue.
As discussed in [0], this version checks the VIRTIO_NET_F_GUEST_HDRLEN is
negotiated.
[0]: http://lore.kernel.org/all/20251029030913.20423-1-xuanzhuo@linux.alibaba.com
v10: fix http://lore.kernel.org/all/202603122214.8Anoxrmq-lkp@intel.com
====================
Link: https://patch.msgid.link/20260320021818.111741-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The commit a2fb4bc4e2 ("net: implement virtio helpers to handle UDP
GSO tunneling.") introduces support for the UDP GSO tunnel feature in
virtio-net.
The virtio spec says:
If the \field{gso_type} has the VIRTIO_NET_HDR_GSO_UDP_TUNNEL_IPV4 bit or
VIRTIO_NET_HDR_GSO_UDP_TUNNEL_IPV6 bit set, \field{hdr_len} accounts for
all the headers up to and including the inner transport.
The commit did not update the hdr_len to include the inner transport.
I observed that the "hdr_len" is 116 for this packet:
17:36:18.241105 52:55:00:d1:27:0a > 2e:2c:df:46:a9:e1, ethertype IPv4 (0x0800), length 2912: (tos 0x0, ttl 64, id 45197, offset 0, flags [none], proto UDP (17), length 2898)
192.168.122.100.50613 > 192.168.122.1.4789: [bad udp cksum 0x8106 -> 0x26a0!] VXLAN, flags [I] (0x08), vni 1
fa:c3:ba:82:05:ee > ce:85:0c:31:77:e5, ethertype IPv4 (0x0800), length 2862: (tos 0x0, ttl 64, id 14678, offset 0, flags [DF], proto TCP (6), length 2848)
192.168.3.1.49880 > 192.168.3.2.9898: Flags [P.], cksum 0x9266 (incorrect -> 0xaa20), seq 515667:518463, ack 1, win 64, options [nop,nop,TS val 2990048824 ecr 2798801412], length 2796
116 = 14(mac) + 20(ip) + 8(udp) + 8(vxlan) + 14(inner mac) + 20(inner ip) + 32(innner tcp)
Fixes: a2fb4bc4e2 ("net: implement virtio helpers to handle UDP GSO tunneling.")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260320021818.111741-3-xuanzhuo@linux.alibaba.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The commit be50da3e9d ("net: virtio_net: implement exact header length
guest feature") introduces support for the VIRTIO_NET_F_GUEST_HDRLEN
feature in virtio-net.
This feature requires virtio-net to set hdr_len to the actual header
length of the packet when transmitting, the number of
bytes from the start of the packet to the beginning of the
transport-layer payload.
However, in practice, hdr_len was being set using skb_headlen(skb),
which is clearly incorrect. This commit fixes that issue.
Fixes: be50da3e9d ("net: virtio_net: implement exact header length guest feature")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260320021818.111741-2-xuanzhuo@linux.alibaba.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, enetc_get_ringparam() only provides rx_pending and tx_pending,
but 'ethtool --show-ring' no longer displays these fields. Because the
ringparam retrieval path has moved to the new netlink interface, where
rings_fill_reply() emits the *x_pending only if the *x_max_pending values
are non-zero. So rx_max_pending and tx_max_pending to are added to
enetc_get_ringparam() to fix the issue.
Note that the maximum tx/rx ring size of hardware is 64K, but we haven't
added set_ringparam() to make the ring size configurable. To avoid users
mistakenly believing that the ring size can be increased, so set
the *x_max_pending to priv->*x_bd_count.
Fixes: e4a1717b67 ("ethtool: provide ring sizes with RINGS_GET request")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260320094222.706339-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When binding a udp_sock to a local address and port, UDP uses
two hashes (udptable->hash and udptable->hash2) for collision
detection. The current code switches to "hash2" when
hslot->count > 10.
"hash2" is keyed by local address and local port.
"hash" is keyed by local port only.
The issue can be shown in the following bind sequence (pseudo code):
bind(fd1, "[fd00::1]:8888")
bind(fd2, "[fd00::2]:8888")
bind(fd3, "[fd00::3]:8888")
bind(fd4, "[fd00::4]:8888")
bind(fd5, "[fd00::5]:8888")
bind(fd6, "[fd00::6]:8888")
bind(fd7, "[fd00::7]:8888")
bind(fd8, "[fd00::8]:8888")
bind(fd9, "[fd00::9]:8888")
bind(fd10, "[fd00::10]:8888")
/* Correctly return -EADDRINUSE because "hash" is used
* instead of "hash2". udp_lib_lport_inuse() detects the
* conflict.
*/
bind(fail_fd, "[::]:8888")
/* After one more socket is bound to "[fd00::11]:8888",
* hslot->count exceeds 10 and "hash2" is used instead.
*/
bind(fd11, "[fd00::11]:8888")
bind(fail_fd, "[::]:8888") /* succeeds unexpectedly */
The same issue applies to the IPv4 wildcard address "0.0.0.0"
and the IPv4-mapped wildcard address "::ffff:0.0.0.0". For
example, if there are existing sockets bound to
"192.168.1.[1-11]:8888", then binding "0.0.0.0:8888" or
"[::ffff:0.0.0.0]:8888" can also miss the conflict when
hslot->count > 10.
TCP inet_csk_get_port() already has the correct check in
inet_use_bhash2_on_bind(). Rename it to
inet_use_hash2_on_bind() and move it to inet_hashtables.h
so udp.c can reuse it in this fix.
Fixes: 30fff9231f ("udp: bind() optimisation")
Reported-by: Andrew Onyshchuk <oandrew@meta.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260319181817.1901357-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_FIXED_PHY=m but CONFIG_B44=y, the kernel fails to link:
ld.lld: error: undefined symbol: fixed_phy_unregister
>>> referenced by b44.c
>>> drivers/net/ethernet/broadcom/b44.o:(b44_remove_one) in archive vmlinux.a
ld.lld: error: undefined symbol: fixed_phy_register_100fd
>>> referenced by b44.c
>>> drivers/net/ethernet/broadcom/b44.o:(b44_register_phy_one) in archive vmlinux.a
The fixed phy support is small enough that just always enabling it
for b44 is the simplest solution, and it avoids adding ugly #ifdef
checks.
Fixes: 10d2f15afb ("net: b44: register a fixed phy using fixed_phy_register_100fd if needed")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260320154927.674555-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 0417adf367 ("ppp: fix race conditions in ppp_fill_forward_path")
dev_fill_forward_path() should be called with RCU read lock held. This
fix was applied to net, while the Airoha flowtable commit was applied to
net-next, so it hadn't been an issue until net was merged into net-next.
Fixes: a8bdd935d1 ("net: airoha: Add wlan flowtable TX offload")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260320094315.525126-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`packet_release()` has a race window where `NETDEV_UP` can re-register a
socket into a fanout group's `arr[]` array. The re-registration is not
cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout
array.
`packet_release()` does NOT zero `po->num` in its `bind_lock` section.
After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex`
still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)`
that already found the socket in `sklist` can re-register the hook.
For fanout sockets, this re-registration calls `__fanout_link(sk, po)`
which adds the socket back into `f->arr[]` and increments `f->num_members`,
but does NOT increment `f->sk_ref`.
The fix sets `po->num` to zero in `packet_release` while `bind_lock` is
held to prevent NETDEV_UP from linking, preventing the race window.
This bug was found following an additional audit with Claude Code based
on CVE-2025-38617.
Fixes: ce06b03e60 ("packet: Add helpers to register/unregister ->prot_hook")
Link: https://blog.calif.io/p/a-race-within-a-race-exploiting-cve
Signed-off-by: Yochai Eisenrich <echelonh@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260319200610.25101-1-echelonh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
ipv6: Fix two GC issues with permanent routes.
Patch 1 fixes the unbounded growth of tb6_gc_hlist due to
permanent routes whose exception routes have all expired.
Patch 2 fixes an issue where exception routes tied to
permanent routes are not properly aged.
Patch 3 is a selftest for the issue fixed by Patch 2.
====================
Link: https://patch.msgid.link/20260320072317.2561779-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without the prior commit, IPv6 GC cannot track exceptions tied
to permanent routes if they were originally added as temporary
routes.
Let's add a test case for the issue.
1. Add temporary routes
2. Create exceptions for the temporary routes
3. Promote the routes to permanent routes
4. Check if GC can find and purge the exceptions
A few notes:
+ At step 4, unlike other test cases, we cannot wait for
$GC_WAIT_TIME. While the exceptions are always iterable via
netlink (since it traverses the entire fib tree instead of
tb6_gc_hlist), rt6_nh_dump_exceptions() skips expired entries.
If we waited for the expiration time, we would be unable to
distinguish whether the exceptions were truly purged by GC or
just hidden due to being expired.
+ For the same reason, at step 2, we use ICMPv6 redirect message
instead of Packet Too Big message. This is because MTU exceptions
always have RTF_EXPIRES, and rt6_age_examine_exception() does not
respect the period specified by net.ipv6.route.flush=1.
+ We add a neighbour entry for the redirect target with NTF_ROUTER.
Without this, the exceptions would be removed at step 3 when the
fib6_may_remove_gc_list() is called.
Without the fix, the exceptions remain even after GC is triggered
by sysctl -wq net.ipv6.route.flush=1.
FAIL: Expected 0 routes, got 5
TEST: ipv6 route garbage collection (promote to permanent routes) [FAIL]
With the fix, GC purges the exceptions properly.
TEST: ipv6 route garbage collection (promote to permanent routes) [ OK ]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260320072317.2561779-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit mechanically put fib6_remove_gc_list()
just after every fib6_clean_expires() call.
When a temporary route is promoted to a permanent route,
there may already be exception routes tied to it.
If fib6_remove_gc_list() removes the route from tb6_gc_hlist,
such exception routes will no longer be aged.
Let's replace fib6_remove_gc_list() with a new helper
fib6_may_remove_gc_list() and use fib6_age_exceptions() there.
Note that net->ipv6 is only compiled when CONFIG_IPV6 is
enabled, so fib6_{add,remove,may_remove}_gc_list() are guarded.
Fixes: 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list of routes.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260320072317.2561779-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5eb902b8e7 ("net/ipv6: Remove expired routes with a
separated list of routes.") introduced a per-table GC list and
changed GC to iterate over that list instead of traversing
the entire route table.
However, it forgot to add permanent routes to tb6_gc_hlist
when exception routes are added.
Commit cfe82469a0 ("ipv6: add exception routes to GC list
in rt6_insert_exception") fixed that issue but introduced
another one.
Even after all exception routes expire, the permanent routes
remain in tb6_gc_hlist, potentially negating the performance
benefits intended by the initial change.
Let's count gc_args->more before and after rt6_age_exceptions()
and remove the permanent route when the delta is 0.
Note that the next patch will reuse fib6_age_exceptions().
Fixes: cfe82469a0 ("ipv6: add exception routes to GC list in rt6_insert_exception")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260320072317.2561779-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Chen says:
====================
net: bcmasp: Fix issues during driver unbind
Fix two issues when we unbind the driver. We hit a double free of the
WoL irq and a double disable of the clk.
====================
Link: https://patch.msgid.link/20260319234813.1937315-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to devm_clk_get_optional() so we can manage the clock ourselves.
We dynamically control the clocks depending on the state of the interface
for power savings. The default state is clock disabled, so unbinding the
driver causes a double disable.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260319234813.1937315-3-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We do not need to free wol_irq since it was instantiated with
devm_request_irq(). So devres will free for us.
Fixes: a2f0751206 ("net: bcmasp: Add support for WoL magic packet")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260319234813.1937315-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca says:
====================
rtnetlink: add missing attributes in if_nlmsg_size
Once again we have some attributes added by rtnl_fill_ifinfo() that
aren't counted in if_nlmsg_size().
====================
Link: https://patch.msgid.link/cover.1773919462.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_link_get_slave_info_data_size counts IFLA_INFO_SLAVE_DATA, but
rtnl_link_slave_info_fill adds both IFLA_INFO_SLAVE_DATA and
IFLA_INFO_SLAVE_KIND.
Fixes: ba7d49b1f0 ("rtnetlink: provide api for getting and setting slave info")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/049843b532e23cde7ddba263c0bbe35ba6f0d26d.1773919462.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice against the same object:
1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct]
2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF]
KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which
then escalates to a NULL-pointer dereference and kernel panic via
smc_rx_update_consumer() when it chases the freed priv->smc pointer:
BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0
Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x650
kasan_report+0xc6/0x100
smc_rx_pipe_buf_release+0x78/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:smc_rx_update_consumer+0x8d/0x350
Call Trace:
<TASK>
smc_rx_pipe_buf_release+0x121/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Kernel panic - not syncing: Fatal exception
Beyond the memory-safety problem, duplicating an SMC splice buffer is
semantically questionable: smc_rx_update_cons() would advance the
consumer cursor twice for the same data, corrupting receive-window
accounting. A refcount on smc_spd_priv could fix the double-free, but
the cursor-accounting issue would still need to be addressed separately.
The .get callback is invoked by both tee(2) and splice_pipe_to_pipe()
for partial transfers; both will now return -EFAULT. Users who need
to duplicate SMC socket data must use a copy-based read path.
Fixes: 9014db202c ("smc: add support for splice()")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Link: https://patch.msgid.link/20260318064847.23341-1-tpluszz77@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for
SET/SET_MASKED actions. In action handling, OVS expects fixed-size
MPLS key data (struct ovs_key_mpls).
Use the already normalized key_len (masked case included) and reject
non-matching MPLS action key sizes.
Reject invalid MPLS action payload lengths early.
Fixes: fbdcdd78da ("Change in Openvswitch to support MPLS label depth of 3 in ingress direction")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Tested-by: Ao Zhou <n05ec@lzu.edu.cn>
Co-developed-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260319080228.3423307-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already
detached the device. Dropping the netdev reference in destroy can race
with concurrent readers that still observe vport->dev.
Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let
vport_netdev_free() drop the reference from the RCU callback, matching
the non-tunnel destroy path and avoiding additional synchronization
under RTNL.
Fixes: a9020fde67 ("openvswitch: Move tunnel destroy function to oppenvswitch module.")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Tested-by: Ao Zhou <n05ec@lzu.edu.cn>
Co-developed-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260319074241.3405262-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kevin Hao says:
====================
net: macb: Fix two lock warnings when WOL is used
This patch series addresses two lock warnings that occur when using WOL as a
wakeup source on my AMD ZynqMP board.
====================
Link: https://patch.msgid.link/20260318-macb-irq-v2-0-f1179768ab24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Access to net_device::ip_ptr and its associated members must be
protected by an RCU lock. Since we are modifying this piece of code,
let's also move it to execute only when WAKE_ARP is enabled.
To minimize the duration of the RCU lock, a local variable is used to
temporarily store the IP address. This change resolves the following
RCU check warning:
WARNING: suspicious RCU usage
7.0.0-rc3-next-20260310-yocto-standard+ #122 Not tainted
-----------------------------
drivers/net/ethernet/cadence/macb_main.c:5944 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/518:
#0: ffff000803ab1408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368
#1: ffff0008090bf088 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8
#2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8
#3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290
#4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0
stack backtrace:
CPU: 3 UID: 0 PID: 518 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #122 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
Call trace:
show_stack+0x24/0x38 (C)
__dump_stack+0x28/0x38
dump_stack_lvl+0x64/0x88
dump_stack+0x18/0x24
lockdep_rcu_suspicious+0x134/0x1d8
macb_suspend+0xd8/0x4c0
device_suspend+0x218/0x4f0
dpm_suspend+0x244/0x3a0
dpm_suspend_start+0x50/0x78
suspend_devices_and_enter+0xec/0x560
pm_suspend+0x194/0x290
state_store+0x110/0x158
kobj_attr_store+0x1c/0x30
sysfs_kf_write+0xa8/0xd0
kernfs_fop_write_iter+0x11c/0x1c8
vfs_write+0x248/0x368
ksys_write+0x7c/0xf8
__arm64_sys_write+0x28/0x40
invoke_syscall+0x4c/0xe8
el0_svc_common+0x98/0xf0
do_el0_svc+0x28/0x40
el0_svc+0x54/0x1e0
el0t_64_sync_handler+0x84/0x130
el0t_64_sync+0x198/0x1a0
Fixes: 0cb8de39a7 ("net: macb: Add ARP support to WOL")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20260318-macb-irq-v2-2-f1179768ab24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devm_free_irq() and devm_request_irq() functions should not be
executed in an atomic context.
During device suspend, all userspace processes and most kernel threads
are frozen. Additionally, we flush all tx/rx status, disable all macb
interrupts, and halt rx operations. Therefore, it is safe to split the
region protected by bp->lock into two independent sections, allowing
devm_free_irq() and devm_request_irq() to run in a non-atomic context.
This modification resolves the following lockdep warning:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 501, name: rtcwake
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 0
7 locks held by rtcwake/501:
#0: ffff0008038c3408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368
#1: ffff0008049a5e88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8
#2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8
#3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290
#4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0
#5: ffff800081d00458 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x48
#6: ffff0008031fb9e0 (&bp->lock){-.-.}-{3:3}, at: macb_suspend+0x144/0x558
irq event stamp: 8682
hardirqs last enabled at (8681): [<ffff8000813c7d7c>] _raw_spin_unlock_irqrestore+0x44/0x88
hardirqs last disabled at (8682): [<ffff8000813c7b58>] _raw_spin_lock_irqsave+0x38/0x98
softirqs last enabled at (7322): [<ffff8000800f1b4c>] handle_softirqs+0x52c/0x588
softirqs last disabled at (7317): [<ffff800080010310>] __do_softirq+0x20/0x2c
CPU: 1 UID: 0 PID: 501 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #125 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
Call trace:
show_stack+0x24/0x38 (C)
__dump_stack+0x28/0x38
dump_stack_lvl+0x64/0x88
dump_stack+0x18/0x24
__might_resched+0x200/0x218
__might_sleep+0x38/0x98
__mutex_lock_common+0x7c/0x1378
mutex_lock_nested+0x38/0x50
free_irq+0x68/0x2b0
devm_irq_release+0x24/0x38
devres_release+0x40/0x80
devm_free_irq+0x48/0x88
macb_suspend+0x298/0x558
device_suspend+0x218/0x4f0
dpm_suspend+0x244/0x3a0
dpm_suspend_start+0x50/0x78
suspend_devices_and_enter+0xec/0x560
pm_suspend+0x194/0x290
state_store+0x110/0x158
kobj_attr_store+0x1c/0x30
sysfs_kf_write+0xa8/0xd0
kernfs_fop_write_iter+0x11c/0x1c8
vfs_write+0x248/0x368
ksys_write+0x7c/0xf8
__arm64_sys_write+0x28/0x40
invoke_syscall+0x4c/0xe8
el0_svc_common+0x98/0xf0
do_el0_svc+0x28/0x40
el0_svc+0x54/0x1e0
el0t_64_sync_handler+0x84/0x130
el0t_64_sync+0x198/0x1a0
Fixes: 558e35ccfe ("net: macb: WoL support for GEM type of Ethernet controller")
Cc: stable@vger.kernel.org
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260318-macb-irq-v2-1-f1179768ab24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs.
Fixes: 6a2968aaf5 ("NFC: basic NCI protocol implementation")
Reviewed-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20260317193334.988609-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The use of IONIC_CMD_LIF_SETATTR in the MAC address update path causes
the ionic firmware to update the LIF's identity in its persistent state.
Since the firmware state is maintained across host warm boots and driver
reloads, any MAC change on the Physical Function (PF) becomes "sticky.
This is problematic because it causes ethtool -P to report the
user-configured MAC as the permanent factory address, which breaks
system management tools that rely on a stable hardware identity.
While Virtual Functions (VFs) need this hardware-level programming to
properly handle MAC assignments in guest environments, the PF should
maintain standard transient behavior. This patch gates the
ionic_program_mac call using is_virtfn so that PF MAC changes remain
local to the netdev filters and do not overwrite the firmware's
permanent identity block.
Fixes: 19058be7c4 ("ionic: VF initial random MAC address if no assigned mac")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260317170806.35390-1-mheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This attempt to fix regressions caused by reusing ident which apparently
is not handled well on certain stacks causing the stack to not respond to
requests, so instead of simple returning the first unallocated id this
stores the last used tx_ident and then attempt to use the next until all
available ids are exausted and then cycle starting over to 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221120
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221177
Fixes: 6c3ea155e5 ("Bluetooth: L2CAP: Fix not tracking outstanding TX ident")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.
In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.
Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid.
Fixes: 371805522f ("bluetooth: hci_uart: add LL protocol serdev driver support")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
__hci_cmd_sync_sk() sets hdev->req_status under hdev->req_lock:
hdev->req_status = HCI_REQ_PEND;
However, several other functions read or write hdev->req_status without
holding any lock:
- hci_send_cmd_sync() reads req_status in hci_cmd_work (workqueue)
- hci_cmd_sync_complete() reads/writes from HCI event completion
- hci_cmd_sync_cancel() / hci_cmd_sync_cancel_sync() read/write
- hci_abort_conn() reads in connection abort path
Since __hci_cmd_sync_sk() runs on hdev->req_workqueue while
hci_send_cmd_sync() runs on hdev->workqueue, these are different
workqueues that can execute concurrently on different CPUs. The plain
C accesses constitute a data race.
Add READ_ONCE()/WRITE_ONCE() annotations on all concurrent accesses
to hdev->req_status to prevent potential compiler optimizations that
could affect correctness (e.g., load fusing in the wait_event
condition or store reordering).
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory.
Link: https://lore.kernel.org/linux-bluetooth/20260315132013.75ab40c5@kernel.org/T/#m1418f9c82eeff8510c1beaa21cf53af20db96c06
Fixes: 302a1f674c ("Bluetooth: MGMT: Fix possible UAFs")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
sco_recv_frame() reads conn->sk under sco_conn_lock() but immediately
releases the lock without holding a reference to the socket. A concurrent
close() can free the socket between the lock release and the subsequent
sk->sk_state access, resulting in a use-after-free.
Other functions in the same file (sco_sock_timeout(), sco_conn_del())
correctly use sco_sock_hold() to safely hold a reference under the lock.
Fix by using sco_sock_hold() to take a reference before releasing the
lock, and adding sock_put() on all exit paths.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path.
Fixes: aac23bf636 ("Bluetooth: Implement LE L2CAP reassembly")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Syzbot reported a KASAN stack-out-of-bounds read in l2cap_build_cmd()
that is triggered by a malformed Enhanced Credit Based Connection Request.
The vulnerability stems from l2cap_ecred_conn_req(). The function allocates
a local stack buffer (`pdu`) designed to hold a maximum of 5 Source Channel
IDs (SCIDs), totaling 18 bytes. When an attacker sends a request with more
than 5 SCIDs, the function calculates `rsp_len` based on this unvalidated
`cmd_len` before checking if the number of SCIDs exceeds
L2CAP_ECRED_MAX_CID.
If the SCID count is too high, the function correctly jumps to the
`response` label to reject the packet, but `rsp_len` retains the
attacker's oversized value. Consequently, l2cap_send_cmd() is instructed
to read past the end of the 18-byte `pdu` buffer, triggering a
KASAN panic.
Fix this by moving the assignment of `rsp_len` to after the `num_scid`
boundary check. If the packet is rejected, `rsp_len` will safely
remain 0, and the error response will only read the 8-byte base header
from the stack.
Fixes: c28d2bff70 ("Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short")
Reported-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b7f3e7d9a596bf6a63e3
Tested-by: syzbot+b7f3e7d9a596bf6a63e3@syzkaller.appspotmail.com
Signed-off-by: Minseo Park <jacob.park.9436@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Nothing too exciting here, mostly fixes for corner cases.
Current release - fix to a fix:
- bonding: prevent potential infinite loop in bond_header_parse()
Current release - new code bugs:
- wifi: mac80211: check tdls flag in ieee80211_tdls_oper
Previous releases - regressions:
- af_unix: give up GC if MSG_PEEK intervened
- netfilter: conntrack: add missing netlink policy validations
- NFC: nxp-nci: allow GPIOs to sleep
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Lt31
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, Bluetooth and netfilter.
Nothing too exciting here, mostly fixes for corner cases.
Current release - fix to a fix:
- bonding: prevent potential infinite loop in bond_header_parse()
Current release - new code bugs:
- wifi: mac80211: check tdls flag in ieee80211_tdls_oper
Previous releases - regressions:
- af_unix: give up GC if MSG_PEEK intervened
- netfilter: conntrack: add missing netlink policy validations
- NFC: nxp-nci: allow GPIOs to sleep"
* tag 'net-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
MPTCP: fix lock class name family in pm_nl_create_listen_socket
icmp: fix NULL pointer dereference in icmp_tag_validation()
net: dsa: bcm_sf2: fix missing clk_disable_unprepare() in error paths
net: shaper: protect from late creation of hierarchy
net: shaper: protect late read accesses to the hierarchy
net: mvpp2: guard flow control update with global_tx_fc in buffer switching
nfnetlink_osf: validate individual option lengths in fingerprints
netfilter: nf_tables: release flowtable after rcu grace period on error
netfilter: bpf: defer hook memory release until rcu readers are done
net: bonding: fix NULL deref in bond_debug_rlb_hash_show
udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n
net/mlx5e: Fix race condition during IPSec ESN update
net/mlx5e: Prevent concurrent access to IPSec ASO context
net/mlx5: qos: Restrict RTNL area to avoid a lock cycle
ipv6: add NULL checks for idev in SRv6 paths
NFC: nxp-nci: allow GPIOs to sleep
net: macb: fix uninitialized rx_fs_lock
net: macb: fix use-after-free access to PTP clock
netdevsim: drop PSP ext ref on forward failure
wifi: mac80211: always free skb on ieee80211_tx_prepare_skb() failure
...
In mptcp_pm_nl_create_listen_socket(), use entry->addr.family
instead of sk->sk_family for lock class setup. The 'sk' parameter
is a netlink socket, not the MPTCP subflow socket being created.
Fixes: cee4034a3d ("mptcp: fix lockdep false positive in mptcp_pm_nl_create_listen_socket()")
Signed-off-by: Li Xiasong <lixiasong1@huawei.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260319112159.3118874-1-lixiasong1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation.
Fixes: 8ed1dc44d3 ("ipv4: introduce hardened ip_no_pmtu_disc mode")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260318130558.1050247-4-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Smatch reports:
drivers/net/dsa/bcm_sf2.c:997 bcm_sf2_sw_resume() warn:
'priv->clk' from clk_prepare_enable() not released on lines: 983,990.
The clock enabled by clk_prepare_enable() in bcm_sf2_sw_resume()
is not released if bcm_sf2_sw_rst() or bcm_sf2_cfp_resume() fails.
Add the missing clk_disable_unprepare() calls in the error paths
to properly release the clock resource.
Fixes: e9ec5c3bd2 ("net: dsa: bcm_sf2: request and handle clocks")
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Link: https://patch.msgid.link/20260318084212.1287-1-mohd.abd.6602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
isotp_sendmsg() uses only cmpxchg() on so->tx.state to serialize access
to so->tx.buf. isotp_release() waits for ISOTP_IDLE via
wait_event_interruptible() and then calls kfree(so->tx.buf).
If a signal interrupts the wait_event_interruptible() inside close()
while tx.state is ISOTP_SENDING, the loop exits early and release
proceeds to force ISOTP_SHUTDOWN and continues to kfree(so->tx.buf)
while sendmsg may still be reading so->tx.buf for the final CAN frame
in isotp_fill_dataframe().
The so->tx.buf can be allocated once when the standard tx.buf length needs
to be extended. Move the kfree() of this potentially extended tx.buf to
sk_destruct time when either isotp_sendmsg() and isotp_release() are done.
Fixes: 96d1c81e6a ("can: isotp: add module parameter for maximum pdu size")
Cc: stable@vger.kernel.org
Reported-by: Ali Norouzi <ali.norouzi@keysight.com>
Co-developed-by: Ali Norouzi <ali.norouzi@keysight.com>
Signed-off-by: Ali Norouzi <ali.norouzi@keysight.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260319-fix-can-gw-and-can-isotp-v2-2-c45d52c6d2d8@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx():
int from = calc_idx(crc8->from_idx, cf->len);
int to = calc_idx(crc8->to_idx, cf->len);
int res = calc_idx(crc8->result_idx, cf->len);
if (from < 0 || to < 0 || res < 0)
return;
However, the loop and the result write then use the raw s8 fields directly
instead of the computed variables:
for (i = crc8->from_idx; ...) /* BUG: raw negative index */
cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */
With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame,
calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with
i = -64, reading cf->data[-64], and the write goes to cf->data[-64].
This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the
start of the canfd_frame on the heap.
The companion function cgw_csum_xor_rel() uses `from`/`to`/`res`
correctly throughout; fix cgw_csum_crc8_rel() to match.
Confirmed with KASAN on linux-7.0-rc2:
BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0
Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62
To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed.
Fixes: 456a8a646b ("can: gw: add support for CAN FD frames")
Cc: stable@vger.kernel.org
Reported-by: Ali Norouzi <ali.norouzi@keysight.com>
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ali Norouzi <ali.norouzi@keysight.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260319-fix-can-gw-and-can-isotp-v2-1-c45d52c6d2d8@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- Consolidate the handling of two special cases in the idle loop that
occur when only one CPU idle state is present (Rafael Wysocki)
- Fix a race condition related to device removal in the runtime PM
core code that may cause a stale device object pointer to be
dereferenced (Bart Van Assche)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmm8Ad4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1yFYIAKaPfbV2uWEbB0l+g7QBk4lEGc+CUxN+
jpBut/hWepoLDzQyqaROtTd8R5dFmKASsLXpNVgDjEDX+HCkFzdmlUlDZar0B8zZ
lZTcQypFPWtKeTD5OuelZK/trT09SdsB5Yeav1O6KXM5bT0ISn/f729gkPGIXXm5
+L8R2SvrEYu1dMZ3ithRq+4/bx1Pqav/g+0aD/tQMBDxjSE0G+d3hPFxvPueDMZX
L8CNC5CcH3vwNrI0NR9EH/z491q1Ddo6XUBW+ja2UGztdBTVmm5fEktDGxVjN8B8
A+ZT0RX1itcV+ngjtNYpXbRlMLwCkTvM8rVLpOANcAmsbNOCYGyM80s=
=aptB
-----END PGP SIGNATURE-----
Merge tag 'pm-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an idle loop issue exposed by recent changes and a race
condition related to device removal in the runtime PM core code:
- Consolidate the handling of two special cases in the idle loop that
occur when only one CPU idle state is present (Rafael Wysocki)
- Fix a race condition related to device removal in the runtime PM
core code that may cause a stale device object pointer to be
dereferenced (Bart Van Assche)"
* tag 'pm-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix a race condition related to device removal
sched: idle: Consolidate the handling of two special cases
- Update the format of the last argument of _DSM to avoid printing
confusing error messages in some cases (Saket Dumbre)
- Fix MFD child automatic modprobe issue by removing a stale check
from acpi_companion_match() (Pratap Nirujogi)
- Prevent possible use-after-free in acpi_processor_errata_piix4()
from occurring by rearranging the code to print debug messages
while holding references to relevant device objects (Rafael Wysocki)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmm8A5MSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1QB0H/0aPqLjjyAUvVKjko7mODZvqbodXSFBo
fTPxqPov5e/m3Tkg2U4t1w1kyQU1Tw9uNaSTQZY0wGNgay31AfGAuiIQaAHQG3BM
LGuSnfptYPAqtKvf6Pl/XOL67n0dAM2zTmibkXrvKQui+hyQKCu5O4gKgmGm3cD7
ecJXLYES/01YPZyj90ywImTU3Dt4APZ1VD2wPbMFAarcjKiwytAdYDL+5eluKji/
/pDhcRb53Zo0ToKLdyIwq6Djeyt2wyaf1Xspujmw+gcWVTMpL4o2T1sCIerR79gz
0SEqs9Hi0yRIVDCN1bmcd6RJPyhEykjB5dGQyq9Nzra8DLPBuKsN2Rg=
=y/dR
-----END PGP SIGNATURE-----
Merge tag 'acpi-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These fix an MFD child automatic modprobe issue introduced recently,
an ACPI processor driver issue introduced by a previous fix and an
ACPICA issue causing confusing messages regarding _DSM arguments to be
printed:
- Update the format of the last argument of _DSM to avoid printing
confusing error messages in some cases (Saket Dumbre)
- Fix MFD child automatic modprobe issue by removing a stale check
from acpi_companion_match() (Pratap Nirujogi)
- Prevent possible use-after-free in acpi_processor_errata_piix4()
from occurring by rearranging the code to print debug messages
while holding references to relevant device objects (Rafael
Wysocki)"
* tag 'acpi-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: bus: Fix MFD child automatic modprobe issue
ACPI: processor: Fix previous acpi_processor_errata_piix4() fix
ACPICA: Update the format of Arg3 of _DSM
