Use drmm_crtc_alloc_with_planes() to simplify the code. As we no longer
have to take care about cleanup, we can get rid of
atmel_hlcdc_crtc_destroy().
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-6-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Get rid of drm_of_find_panel_or_bridge() as it is deprecated and use
devm_drm_of_get_bridge() instead.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-5-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Prefer using the drm_crtc_mask() helper instead of a raw value. It
involves reordering components initialization as we need a valid crtc.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-4-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
According to Documentation/admin-guide/kernel-parameters.txt, this
parameter can be used to disable kernel modesetting.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-2-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Take benefit of managed device resources to reduce the risk of memory
leak and to simplify error paths.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251218-lcd_cleanup_mainline-v2-1-df837aba878f@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Add support for both panels used in the Anbernic RG-DS. These panels
are physically identical and differ only with a single instruction
in the init sequence. The init sequence commands suggest it uses
an identical controller as the jd9365da.
Additionally, allow specifying per-panel dsi->mode_flags that can
override the default values.
Co-developed-by: Alexander Weinzerl <aweinzerl13@yahoo.com>
Signed-off-by: Alexander Weinzerl <aweinzerl13@yahoo.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260113195721.151205-4-macroalpha82@gmail.com
The Anbernic RG-DS uses two (mostly) identical panels as a top
and bottom panel which appear to use the same controller as the
Jadard JD9365DA-H3. The panels differ with a parameter defined
differently in the init sequence.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260113195721.151205-3-macroalpha82@gmail.com
Change instances of gpiod_set_value() to gpiod_set_value_cansleep().
Uses of gpiod_set_value() generates warnings when used in instances
where desc->gdev->can_sleep is true.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260113195721.151205-2-macroalpha82@gmail.com
The different Video Ports support different maximum resolutions.
Reject resolutions that are not supported by a specific VP.
Only the output width is checked because the hardware itself does
not have a hard output height limit.
Filter the mode that can't output by the VP/crtc.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # Sige5
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260117020738.294825-1-andyshrk@163.com
The threaded interrupt handler on RK3588 checks HPD IRQ status before
deciding to continue with interrupt clearing and unmasking. However,
this is not really necessary, since the hard interrupt handler already
performs the very same verification before waking the handler thread.
Get rid of the redundant verification of the HPD interrupt status in the
threaded interrupt handler.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260115-dw-hdmi-qp-hpd-v1-2-e59c166eaa65@collabora.com
The threaded interrupt handler on RK3576 checks HPD IRQ status before
deciding to continue with interrupt clearing and unmasking.
This is not only redundant, since a similar verification has been
already performed by the hard IRQ handler before masking the interrupt,
but is also error prone, because it might happen that hardware clears
the status register right after the masking operation completes, and
before the threaded handler reads its value.
The consequence is that HPD IRQ gets never unmasked, which breaks
hotplug detection until reloading the driver or rebooting the system.
Drop the unnecessary verification of the HPD interrupt status from the
threaded interrupt handler.
Fixes: 36439120ef ("drm/rockchip: dw_hdmi_qp: Add basic RK3576 HDMI output support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260115-dw-hdmi-qp-hpd-v1-1-e59c166eaa65@collabora.com
The commit ca59e33f5a ("drm/atomic: add max_size check to
drm_property_replace_blob_from_id()") added a new parameter to
drm_property_replace_blob_from_id(), however commit 7436a87db9
("drm/tests: hdmi: check the infoframes behaviour") was based on the
older tree and used the old number of params (with me failing to run
kunit tests when applying).
Fix the build error by specifying -1 as the max_size (as expected).
Fixes: 7436a87db9 ("drm/tests: hdmi: check the infoframes behaviour")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601200306.dgF5deFm-lkp@intel.com/
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260119-fix-kunit-infoframe-v1-1-5f2f9b066594@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add colorbar disable operation before reset chontroller, to make sure
colorbar status is clear in the DP init, so if rmmod the driver and the
previous colorbar configuration will not affect the next time insmod the
driver.
Fixes: 3c7623fb5b ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-5-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When using command rmmod and insmod, there is no showing in second time
insmoding. Because DP controller won't send HPD signals, if connection
doesn't change or controller isn't reset. So add reset before unreset
in hibmc_dp_hw_init().
And also need to move the HDCP cfg after DP controller de-resets, so
that HDCP configuration takes effect.
Fixes: 3c7623fb5b ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-4-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
If DP is connected, check the DP BW in mode_valid_ctx() to ensure
that DP's link rate supports high-resolution data transmission.
Fixes: 0ab6ea261c ("drm/hisilicon/hibmc: add dp module in hibmc")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-3-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The issue is that drm_connector_helper_detect_from_ddc() returns wrong
status when plugging or unplugging the monitor, which may cause the link
failed err.[0] Use HPD pin status in DP's detect_ctx() for real physical
monitor in/out, and implement a complete DP detection including read DPCD,
check if it's a branch device and its sink count for different situations.
[0]:
hibme-drm 0000:83:00.0: [drm] *ERROR* channel equalization failed 5 times
hibme-drm 0000:83:00.0: [drm] *ERROR* channel equalization failed 5 times
hibme-drm 0000:83:00.0: [drm] *ERROR* dp link training failed, ret: -16
hibmc-drm 0000:83:00.0: [drm] *ERROR* hibme dp mode set failed: -16
Fixes: 3c7623fb5b ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-2-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
During initialization of DRM buddy memory manager at drm_buddy_init,
mm->free_trees array is allocated for both clear and dirty RB trees.
During cleanup happening at drm_buddy_fini it is never freed, leading to
following memory leaks observed on xe module load & unload cycles:
kmemleak_alloc+0x4a/0x90
__kmalloc_cache_noprof+0x488/0x800
drm_buddy_init+0xc2/0x330 [drm_buddy]
__xe_ttm_vram_mgr_init+0xc3/0x190 [xe]
xe_ttm_stolen_mgr_init+0xf5/0x9d0 [xe]
xe_device_probe+0x326/0x9e0 [xe]
xe_pci_probe+0x39a/0x610 [xe]
local_pci_probe+0x47/0xb0
pci_device_probe+0xf3/0x260
really_probe+0xf1/0x3c0
__driver_probe_device+0x8c/0x180
driver_probe_device+0x24/0xd0
__driver_attach+0x10f/0x220
bus_for_each_dev+0x7f/0xe0
driver_attach+0x1e/0x30
bus_add_driver+0x151/0x290
Deallocate array for free trees when cleaning up buddy memory manager
in the same way as if going through out_free_tree label.
Fixes: d4cd665c98 ("drm/buddy: Separate clear and dirty free block trees")
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20251208102714.4008260-2-michal.grzelak@intel.com
Commit bdb8d06dfe ("dmabuf: Add the capability to expose DMA-BUF stats
in sysfs") added dmabuf statistics to sysfs in 2021 under
CONFIG_DMABUF_SYSFS_STATS. After being used in production, performance
problems were discovered leading to its deprecation in 2022 in commit
e0a9f1fe20 ("dma-buf: deprecate DMABUF_SYSFS_STATS"). Some of the
problems with this interface were discussed in my LPC 2025 talk. [1][2]
Android was probably the last user of the interface, which has since
been migrated to use the dmabuf BPF iterator [3] to obtain the same
information more cheaply. As promised in that series, now that the
longterm stable 6.18 kernel has been released let's remove the sysfs
dmabuf statistics from the kernel.
[1] https://www.youtube.com/watch?v=D83qygudq9c
[2] https://lpc.events/event/19/contributions/2118/
[3] https://lore.kernel.org/all/20250522230429.941193-1-tjmercier@google.com/
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260116190517.3268458-1-tjmercier@google.com
The system dma-buf heap lets userspace allocate buffers from the page
allocator. However, these allocations are not accounted for in memcg,
allowing processes to escape limits that may be configured.
Pass __GFP_ACCOUNT for system heap allocations, based on the
dma_heap.mem_accounting parameter, to use memcg and account for them.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260116-dmabuf-heap-system-memcg-v3-2-ecc6b62cc446@redhat.com
Add a parameter to enable dma-buf heaps allocation accounting using
cgroup for heaps that implement it. It is disabled by default as doing
so incurs caveats based on how memcg currently accounts for shared
buffers.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260116-dmabuf-heap-system-memcg-v3-1-ecc6b62cc446@redhat.com
The "gpuid" module parameter is used to override the gpuid read from a
hardware register and is useful for testing the loading of different
firmware (including processing of the firmware header) without having
the hardware to hand.
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-4-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
We have a module parameter to set the initial group mask before debugfs is
available for any specific device, but don't currently use that value when
initialising devices.
Use the module parameter value as the initial value for group_mask.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-3-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
This value can come from two places: a module parameter or a debugfs file.
In both cases, validate it early to provide feedback to userspace at the
time the value is set instead of deferring until the value is used.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-2-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
We had a whole load of bloaty infrastructure to deal with module parameters
in a way that's wholly unnecessary. Strip it all back to basics to make
adding new parameters less of a headache.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-1-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The rest of the DRM framework uses presence of the callbacks to check if
the particular infoframe is supported. Register HDMI callbacks
dynamically, basing on the corresponding drm_bridge ops.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-9-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
There is little point in generating InfoFrames which are not supported
by the driver. Skip generating the unsupported InfoFrames, making sure
that the kernel never tries to write the unsupported frame. As there are
no remaining usecases, change write_infoframe / clear_infoframe helpers
return an error if the corresponding callback is NULL.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-8-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Updating the InfoFrame if it can not be sent over the wire makes no
sense. Change drm_atomic_helper_connector_hdmi_update_audio_infoframe()
and drm_atomic_helper_connector_hdmi_clear_audio_infoframe() to return
an error if Audio InfoFrame callbacks are not implemented.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-7-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Havign a single set of InfoFrame callbacks doesn't provide enough
information to the DRM framework about the InfoFrame types that are
actually supported. Also it's not really future-proof: it provides a way
to program only a single Vendor-Specific frame, however we might need to
support multiple VSIs at the same time (e.g. HDMI vs HDMI Forum
VSIs).
Provide separate sets of callbacks, one per the InfoFrame type.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-6-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
We already require both hdmi_write_infoframe and hdmi_clear_infoframe
for bridges implementing DRM_BRIDGE_OP_HDMI. It makes sense to require
the clear_infoframes callback for HDMI connectors utilizing
drmm_connector_hdmi_init().
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-4-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Verify the InfoFrames behaviour. Check that reporting InfoFrame as
unsupported doesn't result in a commit error. Also check that HDR and
Audio InfoFrames are not triggered if corresponding features are not
enabled.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-1-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Replace legacy DRM_DEBUG/INFO/WARN/ERROR logging with the corresponding
device-based drm_dbg(), drm_info(), drm_warn() and drm_err() helpers.
For some messages, adjust the log level to better reflect their severity.
This allows filtering via drm.debug, reduces log spam, and helps
differentiate v3d logs from vc4 logs.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260112-v3d-drm-debug-v2-2-8ef6244c97bb@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
All CPU job extension parsers duplicate the same validation procedure:
ensure the extension is attached to a CPU job (not a GPU job) and that
only a single CPU job extension is associated with a given job.
Create a function to consolidate these checks and reduce the boilerplate
across the various CPU job extension handlers. While here, convert the
legacy DRM_DEBUG with a more appropriate drm_dbg().
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260112-v3d-drm-debug-v2-1-8ef6244c97bb@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized
property blobs backed by kernel memory.
Currently, the blob data allocation is not accounted to the allocating
process's memory cgroup, allowing unprivileged users to trigger unbounded
kernel memory consumption and potentially cause system-wide OOM.
Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory
is properly charged to the caller's memcg. This ensures existing cgroup
memory limits apply and prevents uncontrolled kernel memory growth without
introducing additional policy or per-file limits.
Signed-off-by: Xiao Kan <814091656@qq.com>
Signed-off-by: Xiao Kan <xiao.kan@samsung.com>
Link: https://patch.msgid.link/tencent_D12AA2DEDE6F359E1AF59405242FB7A5FD05@qq.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Since commit 56de5e305d ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L")
we may get the following kernel panic, for some panels, when rebooting:
systemd-shutdown[1]: Rebooting.
Call trace:
...
do_serror+0x28/0x68
el1h_64_error_handler+0x34/0x50
el1h_64_error+0x6c/0x70
rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P)
mipi_dsi_device_transfer+0x44/0x58
mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4
ili9881c_unprepare+0x38/0x88
drm_panel_unprepare+0xbc/0x108
This happens for panels that need to send MIPI-DSI commands in their
unprepare() callback. Since the MIPI-DSI interface is stopped at that
point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic.
Fix by moving rzg2l_mipi_dsi_stop() to new callback function
rzg2l_mipi_dsi_atomic_post_disable().
With this change we now have the correct power-down/stop sequence:
systemd-shutdown[1]: Rebooting.
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry
ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry
reboot: Restarting system
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260112154333.655352-1-hugo@hugovil.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Create notifier_wq with WQ_MEM_RECLAIM flag to fix the possible warning.
workqueue: WQ_MEM_RECLAIM amdxdna_js:drm_sched_free_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM notifier_wq:0x0
Fixes: e486147c91 ("accel/amdxdna: Add BO import and export")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260113173624.256053-1-lizhi.hou@amd.com
Make sure to drop the reference taken when looking up the companion
(ganged) device and its driver data during probe().
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: e94236cde4 ("drm/tegra: dsi: Add ganged mode support")
Fixes: 221e3638fe ("drm/tegra: Fix reference leak in tegra_dsi_ganged_probe")
Cc: stable@vger.kernel.org # 3.19: 221e3638fe
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20251121164201.13188-1-johan@kernel.org
Rockchip display hardware is only available on Rockchip SoCs. Hence add
a dependency on ARCH_ROCKCHIP, to prevent asking the user about this
driver when configuring a kernel without Rockchip platform support.
Before, this dependency was implicit through a hard dependency on
ROCKCHIP_IOMMU.
Fixes: 0244539f9a ("drm/rockchip: Drop ROCKCHIP_IOMMU depend for DRM_ROCKCHIP")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/5db192d31cc51f027f107c01c01a353a0569ebf4.1768310045.git.geert+renesas@glider.be
The kernel specifies LUT table sizes in a separate property, however it
doesn't enforce it as a maximum. Some drivers implement max size check
on their own in the atomic_check path. Other drivers simply ignore the
issue. Perform LUT size validation in the generic place.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106-drm-fix-lut-checks-v3-3-f7f979eb73c8@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The function drm_property_replace_blob_from_id() allows checking whether
the blob size is equal to a predefined value. In case of variable-size
properties (like the gamma / degamma LUTs) we might want to check for
the blob size against the maximum, allowing properties of the size
lesser than the max supported by the hardware. Extend the function in
order to support such checks.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106-drm-fix-lut-checks-v3-2-f7f979eb73c8@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
We have a helper to get property values for non-atomic drivers and
another one default property values for atomic drivers. In some cases we
need the ability to get value of immutable property, no matter what kind
of driver it is. Implement new property-related helper,
drm_object_immutable_property_get_value(), which lets the caller to get
the value of the immutable property.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106-drm-fix-lut-checks-v3-1-f7f979eb73c8@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
On some platforms, notably MediaTek MT8196, the shader_present bitmask
in the Mali GPU register for it has cores enabled that may be faulty.
The true shader_present bitmask is found in an efuse instead.
Implement reading shader_present from an nvmem cell if one is present,
falling back to the Mali register if it's absent. The error codes are
trickled up through to the probe function so that probe deferral works.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251220-mt8196-shader-present-v2-3-45b1ff1dfab0@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
On the MediaTek MT8196 SoC, the bitmask for which shader cores are
present and functional is not the one in the Mali GPU's registers, but
in an external efuse.
Add the nvmem cell properties to describe such a setup, and make them
required on MT8196.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251220-mt8196-shader-present-v2-1-45b1ff1dfab0@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The callbacks .probe(), .remove() and .shutdown() for device_drivers
should go away. So migrate to bus methods. There are two differences
that need addressing:
- The bus remove callback returns void while the driver remove callback
returns int (the actual value is ignored by the core).
- The bus shutdown callback is also called for unbound devices, so an
additional check for dev->driver != NULL is needed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20 tegra-video
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/dd55d034c68953268ea416aa5c13e41b158fcbb4.1765355236.git.u.kleine-koenig@baylibre.com
