These flags are not needed on 6 GHz channels, and anyway they were set
incorrectly.
This in turn resulted in alternating channel flags, preventing reg domain
rules to be merged together, so cfg80211 couldn't even send them to the
user space, as the regulatory domain was too large.
Fix it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.b0d51b2229f8.I092e21cde43320ffc2eff17f5748ff9c87c87fcf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an entry for setting the maximum TXOP time in microseconds.
The configured value can be read from the same entry.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.b8d17a9c1731.I57c33574a61edd68bd0ec1aa7009f31111fd7efe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
uAPSD can't be enabled on BSS or P2P Client if there is
another active interface (e.g. associated client). Allow
the code that apply those limitations to run on BSS as well.
Also forbid uAPSD if we have an IBSS or NAN interface in
the system.
Since we are now forbidding uAPSD in any concurrency
scenario, we don't need to check the number of PHY
contexts.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.4ac26534adf7.Ib892020177e86603b2be3a105f8717b9a15951d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The logic here is rather convoluted - we cannot get here with
lq_sta being NULL as mac80211 will (no longer) call us like
that, and since I removed the rate_control_send_low() call in
this function there's no longer any point in setting priv_sta
to NULL either.
So the only thing that remains to check is if we have actually
initialized our lq_sta->drv pointer, and exit if we didn't in
which case we'll use the data mac80211 already set up for the
low rate usage.
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Link: https://msgid.link/20240510170500.a4cdb41825eb.Id202bcc967c32829f70ab1412f8893b6eb7f78e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of passing the full TPE elements, in all their glory
and mixed up data formats for HE backward compatibility, parse
them fully into the right values, and pass that to the drivers.
Also introduce proper validation already in mac80211, so that
drivers don't need to do it, and parse the EHT portions.
The code now passes the values in the right order according to
the channel used by an interface, which could also be a subset
of the data advertised by the AP, if we couldn't connect with
the full bandwidth (for whatever reason.)
Also add kunit tests for the more complicated bits of it.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The chanctx can be shared, but it seems like the TPE values for
this vif should only reflect the channel that the vif uses, which
is captured in bss_conf->chanreq.oper rather than the chanctx.
Use that when calculating defaults, a similar issue is where the
data from the AP is processed, but I'm moving that to mac80211.
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.d99fcf5856b9.I359bb401ea74bf82dc981a86a7ca3fa44d169d2e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The define IEEE80211_MAX_NUM_PWR_LEVEL doesn't make much
sense. Yes, that table has a maximum value of 8, and the
table will actually remain that way, but EHT introduced
a way to encode more levels for 320 MHz channels.
Remove IEEE80211_MAX_NUM_PWR_LEVEL and, for ath11k being
the only user, add ATH11K_NUM_PWR_LEVELS, where it makes
sense since it cannot support 320 MHz channels.
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240506214536.9818e5471055.Icece7e47e963d6b68e0d97ba13c102b37fbaa689@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
6 GHz AP power type details are required to set proper tx power
used to send frames.
Update AP power type received in beacon while preparing
for connection instead of after association so the frames
before association can use the correct tx power.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Link: https://msgid.link/20240506214536.310434f55f76.I6aca291ee06265e3f63e0f9024ba19a850b53a33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add trace events to trace when wiphy works are queued (or
delayed ones scheduled), and other APIs are called. Also
add an event when the worker starts, before acquiring the
mutex, to be able to see potential delays due to locking.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://msgid.link/20240506210002.bf1840a1d22d.I4abba048c1c4017345640219cf1384a0b2288dd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove unused 'agc_work' and 'vco_work' members of 'struct link'.
This follows commit d96324703f ("rt2x00: merge agc and vco works
with link tuner") where AGC and VCO calibration code was completely
redesigned. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240515152824.143537-1-dmantipov@yandex.ru
When changing the interface type we also need to update the bss_num, the
driver private data is searched based on a unique (bss_type, bss_num)
tuple, therefore every time bss_type changes, bss_num must also change.
This fixes for example an issue in which, after the mode changed, a
wireless scan on the changed interface would not finish, leading to
repeated -EBUSY messages to userspace when other scan requests were
sent.
Fixes: c606008b70 ("mwifiex: Properly initialize private structure on interface type changes")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240510110458.15475-1-francesco@dolcini.it
The default netdev interface exposed by WILC1000 is registered at probe,
but the chip mac address is not known until ndo_open, which will load and
start chip firmware and then retrieve stored MAC address from it. As a
consequence, the interface has uninitialized value (00:00:00:00:00) until a
user brings up the interface.
Fix MAC address at probe by setting the following steps:
- at probe, read MAC address directly from fuse
- whenever a new netdevice is created, apply saved mac address (which can
be a user-provided address, or the eFuse Mac address if no address has
been passed by user)
- whenever an interface is brought up for the first time (and so the
firmware is loaded and started), enforce netdevice mac address to the
chip (in case user has changed it)
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Closes: https://lore.kernel.org/netdev/CAEyMn7aV-B4OEhHR4Ad0LM3sKCz1-nDqSb9uZNmRWR-hMZ=z+A@mail.gmail.com/T/
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Co-developed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-6-afef09f1cd10@bootlin.com
In order to be able to read raw registers (eg the nv mac address) in
wilc1000 during probe before the firmware is loaded and running, we need to
run the basic sdio functions initialization, but then we also need to
properly deinitialize those right after, to preserve the current driver
behavior (keeping the chip idle/unconfigured until the corresponding
interface is brought up). Calling wilc_sdio_deinit in its current form is
not enough because it merely resets an internal flag.
Implement a deinit sequence which symmetrically reset all steps performed
in wilc_sdio_init (only for parts activating/deactivating features, for the
sake of simplicity, let's ignore blocks size configuration reset)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-5-afef09f1cd10@bootlin.com
wilc driver currently reads and sets mac address by firmware calls. It
means that we can not access mac address if no interface has been brought
up (so firmware is up and running). Another way to get mac address is to
read it directly from eFUSE.
Add a function helper to read the mac address written in eFuse, without
firmware assistance
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-4-afef09f1cd10@bootlin.com
Any attempt to provide a const mac address to wilc_set_mac_address results
in the following warning:
warning: passing argument 2 of 'wilc_set_mac_address' discards 'const'
qualifier from pointer target type [-Wdiscarded-qualifiers]
[...]
drivers/net/wireless/microchip/wilc1000/hif.h:170:52: note: expected 'u8 *'
{aka 'unsigned char *'} but argument is of type 'const unsigned char *'a
int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr);
Instead of using an explicit cast each time we need provide a MAC address,
set the function parameter as const
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-3-afef09f1cd10@bootlin.com
SDIO/SPI probes functions automatically add a default wlan interface on top
of registered wiphy, through wilc_cfg80211_init which in turn calls
wilc_netdev_ifc_init. However, bus is still not fully initialized when we
register corresponding net device (for example we still miss some private
driver data pointers), which for example makes it impossible to
retrieve MAC address from chip (which is supposed to be set on net device
before its registration) before registering net device. More generally, net
device registration should not be done until driver has fully initialized
everything and is ready to handle any operation on the net device.
Prevent net device from being registered so early by doing it at the end of
probe functions. Apply this logic to both sdio and spi buses.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-2-afef09f1cd10@bootlin.com
net device registration is currently done in wilc_netdev_ifc_init but
other initialization operations are still done after this registration.
Since net device is assumed to be usable right after registration, it
should be the very last step of initialization.
Move netdev registration at the very end of wilc_netdev_ifc_init to let
this function completely initialize netdevice before registering it.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240514-mac_addr_at_probe-v2-1-afef09f1cd10@bootlin.com
The band_idx variable in the function wlc_lcnphy_tx_iqlo_cal() will
never be set to 1 as BCM4313 is the only device for which the LCN PHY
code is used. This is a 2G-only device.
Fixes: 5b435de0d7 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240509231037.2014109-1-samasth.norway.ananda@oracle.com
Monitor/sniffer mode benefits from all types of frames, even if FCS
check fails. But we must mark frames as such.
Tested on iwl3945 only.
Signed-off-by: Andrii Batyiev <batyiev@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240509101140.32664-1-batyiev@gmail.com
The third, and most likely the last, "new features" pull request for
v6.10 with changes both in stack and in drivers. In ath12k and rtw89
we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi
7 devices will not support Wireless Extensions (WEXT) anymore so if
someone is still using the legacy WEXT interface it's time to switch
to nl80211 now!
We merged wireless into wireless-next as we decided not to send a
wireless pull request to v6.9 this late in the cycle. Also an
immutable branch with MHI subsystem was merged to get ath11k and
ath12k hibernation working.
Major changes:
mac80211/cfg80211
* handle color change per link
mt76
* mt7921 LED control
* mt7925 EHT radiotap support
* mt7920e PCI support
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
rtw89
* complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
* use BIOS ACPI settings to set TX power and channels
* disable Wireless Extensios on Wi-Fi 7 devices
iwlwifi
* block_esr debugfs file
* support again firmware API 90 (was reverted earlier)
* provide channel survey information for Automatic Channel Selection (ACS)
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmY7aisRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuILQgAmcfU9EJca08qqI2dvcu/X3C/WBVaOQUC
3sdvdGfaO9bTXDjbt0KfmhYNc0BHIM1Jzbegmhe80k6/4cnkWh0JgGZbgMMZGL+V
KI8ejbjY1BpfReApiL37DzSUWh176u4jNhUhifRXrLYxBkoZ5goUX8u6meMZHuj4
8EBfW7xGhtmMn2Po+bUYNXsczWR+mcfxfNF3vfyYIIsuJz2wbONcRuc0Hvq1mHmC
Ebtq7myY/SQvLtILGZxwAhdgHH8AgCN9R5WpzcCHze8t8xmmt4CjdwS6BGwmaBNM
NoGnzHvDG0u+dUYcY/x1tiky9PKRjMtMW+GvYPUvjy5j3nDDXeq51w==
=tf9q
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.10
The third, and most likely the last, "new features" pull request for
v6.10 with changes both in stack and in drivers. In ath12k and rtw89
we disabled Wireless Extensions just like with iwlwifi earlier. Wi-Fi
7 devices will not support Wireless Extensions (WEXT) anymore so if
someone is still using the legacy WEXT interface it's time to switch
to nl80211 now!
We merged wireless into wireless-next as we decided not to send a
wireless pull request to v6.9 this late in the cycle. Also an
immutable branch with MHI subsystem was merged to get ath11k and
ath12k hibernation working.
Major changes:
mac80211/cfg80211
* handle color change per link
mt76
* mt7921 LED control
* mt7925 EHT radiotap support
* mt7920e PCI support
ath12k
* debugfs support
* dfs_simulate_radar debugfs file
* disable Wireless Extensions
* suspend and hibernation support
* ACPI support
* refactoring in preparation of multi-link support
ath11k
* support hibernation (required changes in qrtr and MHI subsystems)
* ieee80211-freq-limit Device Tree property support
ath10k
* firmware-name Device Tree property support
rtw89
* complete features of new WiFi 7 chip 8922AE including BT-coexistence
and WoWLAN
* use BIOS ACPI settings to set TX power and channels
* disable Wireless Extensios on Wi-Fi 7 devices
iwlwifi
* block_esr debugfs file
* support again firmware API 90 (was reverted earlier)
* provide channel survey information for Automatic Channel Selection (ACS)
* tag 'wireless-next-2024-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (214 commits)
wifi: mwl8k: initialize cmd->addr[] properly
wifi: iwlwifi: Ensure prph_mac dump includes all addresses
wifi: iwlwifi: mvm: don't request statistics in restart
wifi: iwlwifi: mvm: exit EMLSR if secondary link is not used
wifi: iwlwifi: mvm: add beacon template version 14
wifi: iwlwifi: mvm: align UATS naming with firmware
wifi: iwlwifi: Force SCU_ACTIVE for specific platforms
wifi: iwlwifi: mvm: record and return channel survey information
wifi: iwlwifi: mvm: add the firmware API for channel survey
wifi: iwlwifi: mvm: Fix race in scan completion
wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidth
wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasons
wifi: iwlwifi: mvm: Add active EMLSR blocking reasons prints
wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
wifi: iwlwifi: mvm: fix primary link setting
wifi: iwlwifi: mvm: use already determined cmd_id
wifi: iwlwifi: mvm: don't reset link selection during restart
wifi: iwlwifi: Print EMLSR states name
wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active
wifi: iwlwifi: mvm: fix typo in debug print
...
====================
Link: https://lore.kernel.org/r/20240508120726.85A10C113CC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei says:
====================
netdevsim: add NAPI support
Add NAPI support to netdevsim and register its Rx queues with NAPI
instances. Then add a selftest using the new netdev Python selftest
infra to exercise the existing Netdev Netlink API, specifically the
queue-get API.
This expands test coverage and further fleshes out netdevsim as a test
device. It's still my goal to make it useful for testing things like
flow steering and ZC Rx.
====================
Link: https://lore.kernel.org/r/20240507163228.2066817-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest for netdev generic netlink. For now there is only a
single test that exercises the `queue-get` API.
The test works with netdevsim by default or with a real device by
setting NETIF.
Add a timeout param to cmd() since ethtool -L can take a long time on
real devices.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add NAPI support to netdevim, similar to veth.
* Add a nsim_rq rx queue structure to hold a NAPI instance and a skb
queue.
* During xmit, store the skb in the peer skb queue and schedule NAPI.
* During napi_poll(), drain the skb queue and pass up the stack.
* Add assoc between rxq and NAPI instance using netif_queue_set_napi().
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Run tools/testing/selftest/net/csum.c as part of drv-net.
This binary covers multiple scenarios, based on arguments given,
for both IPv4 and IPv6:
- Accept UDP correct checksum
- Detect UDP invalid checksum
- Accept TCP correct checksum
- Detect TCP invalid checksum
- Transmit UDP: basic checksum offload
- Transmit UDP: zero checksum conversion
The test direction is reversed between receive and transmit tests, so
that the NIC under test is always the local machine.
In total this adds up to 12 testcases, with more to follow. For
conciseness, I replaced individual functions with a function factory.
Also detect hardware offload feature availability using Ethtool
netlink and skip tests when either feature is off. This need may be
common for offload feature tests and eventually deserving of a thin
wrapper in lib.py.
Missing are the PF_PACKET based send tests ('-P'). These use
virtio_net_hdr to program hardware checksum offload. Which requires
looking up the local MAC address and (harder) the MAC of the next hop.
I'll have to give it some though how to do that robustly and where
that code would belong.
Tested:
make -C tools/testing/selftests/ \
TARGETS="drivers/net drivers/net/hw" \
install INSTALL_PATH=/tmp/ksft
cd /tmp/ksft
sudo NETIF=ens4 REMOTE_TYPE=ssh \
REMOTE_ARGS="root@10.40.0.2" \
LOCAL_V4="10.40.0.1" \
REMOTE_V4="10.40.0.2" \
./run_kselftest.sh -t drivers/net/hw:csum.py
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240507154216.501111-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
route_dumpit() already relies on RCU, RTNL is not needed.
Also change return value at the end of a dump.
This allows NLMSG_DONE to be appended to the current
skb at the end of a dump, saving a couple of recvmsg()
system calls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Remi Denis-Courmont <courmisch@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507121748.416287-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Various ndo_set_config() methods can change dev->if_port
dev->if_port is going to be read locklessly from
rtnl_fill_link_ifmap().
Add corresponding WRITE_ONCE() on writer sides.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507184144.1230469-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to use this_cpu_ptr(dst_cache->cache) twice.
Compiler is unable to optimize the second call, because of
per-cpu constraints.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240507132717.627518-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dst_cache->reset_ts is read or written locklessly,
add READ_ONCE() and WRITE_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240507132000.614591-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a compatible property specific to IPQ9574. This should be used
along with the IPQ4019 compatible. This second compatible serves the
same purpose as the ipq{5,6,8} compatibles. This is to indicate that
the clocks properties are required.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240507024758.2810514-1-mr.nuke.me@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without this change the created netns instances are not cleared after
this script execution. To fix this problem the cleanup_all_ns function
from ../lib.sh is called.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the explicit call to "return" in the void ax25_ds_set_timer
function that was introduced in 78a7b5dbc0 ("ax.25: x.25: Remove the
now superfluous sentinel elements from ctl_table array").
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's make all IPVS sysctls writtable even when
network namespace is owned by non-initial user namespace.
Let's make a few sysctls to be read-only for non-privileged users:
- sync_qlen_max
- sync_sock_size
- run_estimation
- est_cpulist
- est_nice
I'm trying to be conservative with this to prevent
introducing any security issues in there. Maybe,
we can allow more sysctls to be writable, but let's
do this on-demand and when we see real use-case.
This patch is motivated by user request in the LXC
project [1]. Having this can help with running some
Kubernetes [2] or Docker Swarm [3] workloads inside the system
containers.
Link: https://github.com/lxc/lxc/issues/4278 [1]
Link: b722d017a3/pkg/proxy/ipvs/proxier.go (L103) [2]
Link: 3797618f9a/osl/namespace_linux.go (L682) [3]
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Simon Horman <horms@verge.net.au>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Jozsef Kadlecsik <kadlec@netfilter.org>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the ipq806x dwmac driver is almost always used attached to the
CPU port of a switch and phy-mode was always set to "rgmii" or "sgmii".
Some device came up with a special configuration where the PHY is
directly attached to the GMAC port and in those case phy-mode needs to
be set to "rgmii-id" to make the PHY correctly work and receive packets.
Since the driver supports only "rgmii" and "sgmii" mode, when "rgmii-id"
(or variants) mode is set, the mode is rejected and probe fails.
Add support also for these phy-modes to correctly setup PHYs that requires
delay applied to tx/rx.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
