Document the new samsung-j5x device tree bindings used in its device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106142956.547081-1-linmengbo0689@protonmail.com
Depending on the platform, either the modem or the AP must load GSI
firmware for IPA before it can be used. To date, this has been
indicated by the presence or absence of a "modem-init" property.
That mechanism has been deprecated. Instead, we indicate how GSI
firmware should be loaded by the value of the "qcom,gsi-loader"
property.
Update all ARM platforms that use IPA to use the "qcom,gsi-loader"
property to specify how the GSI firmware is loaded.
Update the affected nodes so the status property is last.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221231002716.2367375-2-elder@linaro.org
Specify pre-parsed per-sensor calibration nvmem cells in the tsens
device node rather than parsing the whole data blob in the driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230101194034.831222-21-dmitry.baryshkov@linaro.org
Specify pre-parsed per-sensor calibration nvmem cells in the tsens
device node rather than parsing the whole data blob in the driver.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230101194034.831222-20-dmitry.baryshkov@linaro.org
This fixes a regression on Inforce 6540, as the sdhci nodes no longer
overrides the platform's mmc nodes.
-----BEGIN PGP SIGNATURE-----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=T96m
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-fixes-for-6.2' into dts-for-6.3
Qualcomm ARM32 DTS fix for 6.2
This fixes a regression on Inforce 6540, as the sdhci nodes no longer
overrides the platform's mmc nodes.
Document the MSM8939 and supported boards in upstream Sony "Tulip" M4 Aqua
and Square APQ8039 T2.
MSM8939 is one of the older SoCs so we need to expand the list of
qcom,board-ids to allow for the bootloader DTS board-id matching
dependency.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117024846.1367794-2-bryan.odonoghue@linaro.org
Document the new gplus,fl8005a device tree bindings used in its
device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133158.139785-1-linmengbo0689@protonmail.com
Document SM6115P, an APQ version of SM6115.
Document Lenovo Tab P11 (J606F) as a SM6115P device.
Add SM6115 to the msm-id list of shame.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221208201401.530555-4-konrad.dybcio@linaro.org
Allow qcom,board-id and qcom,msm-id leagcy properties on these older
platforms: MSM8956, SDM636 and SM4250. Also mention more OnePlus
devices using modified qcom,board-id field.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214150605.173346-1-krzysztof.kozlowski@linaro.org
Add entries in the device tree binding for sc7280-zombie with NVMe.
Signed-off-by: Owen Yang <ecs.taipeikernel@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221214114706.1.Ie4ca64ad56748de5aacd36237d42c80dd003c1a9@changeid
Keep only one clock frequency for timer, because:
1. DT schema does not allow multiple frequencies in such property,
2. The Linux timer driver reads only first frequency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-11-krzysztof.kozlowski@linaro.org
Keep only one clock frequency for timer, because:
1. DT schema does not allow multiple frequencies in such property,
2. The Linux timer driver reads only first frequency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-10-krzysztof.kozlowski@linaro.org
Keep only one clock frequency for timer, because:
1. DT schema does not allow multiple frequencies in such property,
2. The Linux timer driver reads only first frequency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-9-krzysztof.kozlowski@linaro.org
Keep only one clock frequency for timer, because:
1. DT schema does not allow multiple frequencies in such property,
2. The Linux timer driver reads only first frequency.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212163532.142533-8-krzysztof.kozlowski@linaro.org
Document the SM8550 SoC binding and the MTP board.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106201047.337409-2-abel.vesa@linaro.org
Extend the secon DSI interface with the SoC-specific compat entry,
following the change for the first DSI interface.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230110055433.734188-1-dmitry.baryshkov@linaro.org
Add silicon specific compatible qcom,msm8974-dsi-ctrl to the
mdss-dsi-ctrl block. This allows us to differentiate the specific bindings
for msm8974 against the yaml documentation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223021025.1646636-10-bryan.odonoghue@linaro.org
Append silicon specific compatible qcom,apq8064-dsi-ctrl to the
mdss-dsi-ctrl block. This allows us to differentiate the specific bindings
for apq8064 against the yaml documentation.
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223021025.1646636-9-bryan.odonoghue@linaro.org
Add SoC-specific compatible to the USB HS PHY to match other devices and
bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223161835.112079-3-krzysztof.kozlowski@linaro.org
Add SoC-specific compatible to the USB HS PHY to match other devices and
bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223161835.112079-2-krzysztof.kozlowski@linaro.org
Configure the reserved memory for ADSP and enable it.
Delete nodes with reference to label.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221218211957.118473-1-matti.lehtimaki@gmail.com
Document the various phones added in upcoming patches. Also allow
qcom,msm-id and qcom,board-id for msm8953 and sdm450.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221207-msm8953-6-1-next-dtbs-v3-v3-1-a64b3b0af0eb@z3ntu.xyz
Add a node for the current ADC (IADC) found in PM8226.
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
[bjorn: Updated node name and added specific compatible, per request from Luca Weiss]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223193403.781355-4-rayyan@ansari.sh
The PON (Power On) device in PM8226 supports both the power key and
resin (reset input).
The reset input is usually connected to a physical volume up/down button.
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221223193403.781355-3-rayyan@ansari.sh
Add clocks and clock-names nodes to the mmcc device to bind clocks using
the DT links.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-12-dmitry.baryshkov@linaro.org
Add clocks and clock-names nodes to the gcc device to bind clocks using
the DT links.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204124508.1415713-11-dmitry.baryshkov@linaro.org
While changing node names of APQ8084 SDHCI, the ones in IFC6540 board
were not updated leading to disabled and misconfigured SDHCI.
Cc: <stable@vger.kernel.org>
Fixes: 2477d81901 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204084614.12193-1-krzysztof.kozlowski@linaro.org
A1-724 uses a Focaltech FT5446 touchscreen that is connected to blsp_i2c5.
Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221123033844.149115-1-linmengbo0689@protonmail.com
Iconia Talk S uses a Bosch BMC150 accelerometer/magnetometer combo.
The chip provides two separate I2C devices for the accelerometer
and magnetometer that are already supported by the bmc150-accel
and bmc150-magn driver.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221123033830.149061-1-linmengbo0689@protonmail.com
Acer Iconia Talk S A1-724 is a tablet using the MSM8916 SoC released
in 2014.
Note: The original firmware from Acer can only boot 32-bit kernels.
To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
with EDL, e.g. taken from the DragonBoard 410c. This works because Acer
didn't set up (firmware) secure boot.
Add a device tree for with initial support for:
- GPIO keys
- pm8916-vibrator
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- WCNSS (WiFi/BT)
- Regulators
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221123033817.149007-1-linmengbo0689@protonmail.com
Document the new acer,a1-724 device tree bindings used in its device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221123033804.148953-1-linmengbo0689@protonmail.com
Set usb-charge-current-limit to higher value so that the device can be
charged over USB.
Signed-off-by: Julian Weigt <juw@posteo.de>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221121213019.324558-2-luca@z3ntu.xyz
As part of a recent cleanup commit, the remoteproc supplies for adsp and
modem were removed from msm8974.dtsi and now need to be set in the
device dts. Do so.
Fixes: f300826d27 ("ARM: dts: qcom-msm8974: Sort and clean up nodes")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221121212226.321514-2-luca@z3ntu.xyz
Define the pm8841 regulators under SMD/RPM, to allow the modem
remoteproc to set the voltage during boot of the remote processor.
Entries are just copied from the Honami dts.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221121212226.321514-1-luca@z3ntu.xyz
The MPSS PAS remoteproc bindings require memory-region. The MPSS PAS
device node is disabled, but schema still asks for it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118113747.56700-1-krzysztof.kozlowski@linaro.org
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
$ cat timer.cocci
@@
expression ptr, slab;
identifier timer, rfield;
@@
(
- del_timer(&ptr->timer);
+ timer_shutdown(&ptr->timer);
|
- del_timer_sync(&ptr->timer);
+ timer_shutdown_sync(&ptr->timer);
)
... when strict
when != ptr->timer
(
kfree_rcu(ptr, rfield);
|
kmem_cache_free(slab, ptr);
|
kfree(ptr);
)
$ spatch timer.cocci . > /tmp/t.patch
$ patch -p1 < /tmp/t.patch
Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One driver specific change here which handles the case where a SPI
device for some reason tries to change the bus speed during a message on
fsl_spi hardware, this should be very unusual.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOmIFQACgkQJNaLcl1U
h9BD2Qf/byfpQzO+8mnDIenWP3X/WMNxJybIe1zaZXOEPRdxmE24Q7BvROnu/80C
jiKGJ3x/n5dhgnBvBJYdTw93BwDUJIcoz42WHnJMxRpxHPd/IX9N8NEOtMU5Z7T6
R/9LPpTja33CXXqbvhZw2M1dhVxbEZ9VgPVOemz0nLQtYnM4/Y8wj2RFOGgJFZ91
krY8S7VkLp6ycdv+a9ofMck+l05zpQ7TG54Nmr/0wvexosj7x7JLyZx6CahGL4/E
PMF7MDblLIrCvMtJPs2gpjHTiAReu85akoOvxBcZc5JNNynp8GXmDcOwgPRbZ7pi
bAJzH0LnwPQycTX+e46QMpViyVll7g==
=zqM3
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One driver specific change here which handles the case where a SPI
device for some reason tries to change the bus speed during a message
on fsl_spi hardware, this should be very unusual"
* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl_spi: Don't change speed while chipselect is active
Two core fixes here, one for a long standing race which some Qualcomm
systems have started triggering with their UFS driver and another fixing
a problem with supply lookup introduced by the fixes for devm related
use after free issues that were introduced in this merge window.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOmHd4ACgkQJNaLcl1U
h9A8hQf/fTezN966/Rp9tvP9YJOPmluqoqDxp/kbyfs3wXlhGR51rytXk/h0DDUD
U8VYIzIyJ7RyqNRtbSqoaNKTCq73Z2/eWl3O/Tsw/mVbpsPHbgDFG4qmM3wE88Rm
u6tOFHouTMQPSJ1yDWJrnR627uRQsnjmJbElSkSWXGWVtJnBqbj+QPGal+hXR/lv
0Fo3nvKvLG5W7GkRh7rRTBu+reJAM4piFQzWxWStiyQwgRLZzpPbgXmpPfto7J5L
WeRMEJkprUVdps+DuylnsHHPD1EA0sBwvs5FQ7yKFuWoejZLC/loW51uColwiIOw
uhQlLzm8WwLePjYQPatHDegxu056fg==
=YhNZ
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two core fixes here, one for a long standing race which some Qualcomm
systems have started triggering with their UFS driver and another
fixing a problem with supply lookup introduced by the fixes for devm
related use after free issues that were introduced in this merge
window"
* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix deadlock on regulator enable
regulator: core: Fix resolve supply lookup issue
Use "grep -E" instead of "egrep".
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEnGZC8gbRfLXdcpA0F+92B3f5RZ0FAmOkuuwACgkQF+92B3f5
RZ2zEA/8CBpFlSoz9oY7QOWp+l08Zja7jHuuMrqxYAmXwMdUmwCBYXgVbInRtl78
fnD0fbzwTV4S+gpkcykzUyYC/blPHWRh2RL00To2AhJ8402f0VD6gVF/FjWMRUDx
YkmJdkLBXUUg6r78M9nwIp3spMYMpD73nCSY+iX+VwL/mLgabsgDjiGLpCVtRPkd
LiWm91GgzRaCBYYT7qzHMWhXqixyRTq/10/tRWhVc/Iwxq2BefoCS7VKei3K9Srh
F0+ZNSjBbju5+nVMaNrUFdbM+nNz5i+DoHYpc7Fs9KpCTjKHLt3heEuFBtRuCBq/
i3hvI8PcIe6LCkCBh3Vpw0vvP+tMoIla+ZaitIqUtkQXDnh76JVyzLadWP221DX7
0z6XBlyXDyYWMO+qv1K+wU34VBN7lXbEbOH0+px0zigMb1V68aFqZULJguEFoZNx
m55bX8IokSTMnlcP3PglS3vCjAoGGjHptl65Ym6ZeBQFMJPMtJmwZS0UZw92yksH
sgoyzfjpHzxBgKmOMlj/yQPohf/fTnvcNq8H2YNxKx0hxQE4m9AdtsuCbm0Kgs0z
MmyRvFJ5AGim9/xuzL+eb88t1B9vwUIvOqAlox3yDo7mJBuEQruexiMp0tfMZOvW
XdF+ZWuAm+Iv6QQEmFnpO6CsEgDJ284wL1RITbbvRW3DR2AHGhU=
=m/60
-----END PGP SIGNATURE-----
Merge tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccicheck update from Julia Lawall:
"Modernize use of grep in coccicheck:
Use 'grep -E' instead of 'egrep'"
* tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: use "grep -E" instead of "egrep"
