synchronize_net() in bareudp_sock_release() has existed since
day 1, commit 571912c69f ("net: UDP tunnel encapsulation module
for tunnelling different protocols like MPLS, IP, NSH etc.").
It was most likely copied from a similar tunneling device like
vxlan or geneve.
bareudp_sock_release() is called from dev->netdev_ops->ndo_stop(),
and synchronize_net() in unregister_netdevice_many_notify() ensures
that inflight bareudp fast paths finish before bareudp_dev is freed.
Let's remove the redundant synchronize_net() in bareudp_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When changing the geneve config, geneve_changelink() sandwiches
the config memcpy() between geneve_quiesce() and geneve_unquiesce().
geneve_quiesce() temporarily clears geneve->sock[46] and their
sk_user_data, and then calls synchronize_net() to wait for inflight
fast paths to finish.
geneve_unquiesce() then restores the cleared pointers, but it also
superfluously calls synchronize_net().
The latter synchronize_net() provides no benefit; with or without it,
inflight fast paths can see either the NULL pointers or the original
pointers alongside the new configuration.
Let's remove the redundant synchronize_net() in geneve_unquiesce().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vxlan previously had an issue where the fast path could access
stale pointers, which was fixed by commit c6fcc4fc5f ("vxlan:
avoid using stale vxlan socket.").
geneve later followed the same pattern, and commit fceb9c3e38
("geneve: avoid using stale geneve socket.") copied synchronize_net()
from vxlan_sock_release() into geneve_sock_release().
However, that change occurred after commit ca065d0cf8 ("udp: no
longer use SLAB_DESTROY_BY_RCU"), and geneve had already been
using kfree_rcu() to free geneve_sock.
Therefore, the synchronize_net() was never actually needed there.
Let's remove the redundant synchronize_net() in geneve_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially, a dedicated workqueue was used to defer calling
udp_tunnel_sock_release(vxlan_sock->sock) and kfree(vxlan_sock).
Later, commit 0412bd931f ("vxlan: synchronously and race-free
destruction of vxlan sockets") removed the workqueue and instead
invoked these two functions immediately after synchronize_net().
This was intended to prevent UAF of the UDP socket in the fast path.
( Note that the "nondeterministic behaviour" mentioned in that
commit was not addressed, as another thread not waiting RCU gp
still sees the same behaviour. )
However, a week prior to that change, commit ca065d0cf8 ("udp:
no longer use SLAB_DESTROY_BY_RCU") had already moved UDP socket
freeing to after the RCU grace period. This made the synchronize_net()
in vxlan_sock_release() completely redundant.
Since vxlan_sock now uses kfree_rcu() and is invoked after
udp_tunnel_sock_release(), vxlan_sock is guaranteed to be freed
either at the same time or after the UDP socket is released,
following the RCU grace period.
Let's remove the redundant synchronize_net() in vxlan_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net/sched: sch_drr: lockless cl->deficit and cl->quantum
First patch adds missing annotations around cl->deficit.
Second patch makes cl->quantum lockless, to prepare
future lockless qdisc dumps.
====================
Link: https://patch.msgid.link/20260519094618.2632073-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drr_dump_class_stats() runs without qdisc spinlock held.
Add missing READ_ONCE()/WRITE_ONCE() annotations around cl->deficit.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260519094618.2632073-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5e138e0ec3 ("w5100: remove MMIO support") removes
include/linux/platform_data/wiznet.h, but misses to remove the file entry
in NETWORKING DRIVERS referring to that file.
Remove the obsolete file entry in NETWORKING DRIVERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260519091646.302458-1-lukas.bulwahn@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260519140101.1584946-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260519142710.1587324-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching these arrays, unify usage of whitespace in the list
terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260519145722.1590298-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching this array, unify usage of whitespace in the list
terminator to what most other arrays are using.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260519153613.1594429-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260519160721.1597568-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the per-DMB connection pointers in the SMCD device allocation
instead of allocating a separate connection array.
This keeps the connection table tied to the SMCD device lifetime and
simplifies the allocation and cleanup paths.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20260519005206.628071-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PPCNT group 0x10 (per-priority counters) carries an rx_discards field at
offset 0x78. These counters aggregate up into if_in_discards, but don't
show up anywhere else. Since there are many things that aggregate into
`if_in_discards`, having these counters helps distinguish what caused
those discards (in my case they were caused by headroom buffer overruns
due to inappropriately configured buffer sizes).
Of note, from emperical testing, these counter are per-"priority group"
(PG) not per-"switch priority". It's a bit confusing, because the rest
of these counter are per-"switch priority" and the header file calls
these "Per Priority Group Counters". However, that should be read as
"(Per Priority) Group Counters", not "Per (Priority Group) Counters".
I attempted to distinguish this in the counter naming by calling these
`rx_discards_pg_N` rather than `rx_discards_prio_N` (which is the
naming scheme of the other counters in this PPCNT group).
I will also note that the mlx5 driver (which already has this counter)
uses the schme `rx_prioN_discards` (and same for the other counters
in this group). However, I was unable to determine whether the mlx5
counters behave the same as the mlxsw counters with respect to PG
mapping. An attempt to remap to a different PG there did not change
which counter incremented, but the mlx5 configuration code is quite
different, so it's possible the remapping needs to be done differently.
Signed-off-by: Keno Fischer <keno@juliahub.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/agqkMwgM1PdkyMUR@juliahub.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allison Henderson says:
====================
selftests: rds: Add ROCE support to rds selftests
Currently the rds selftests only tests the tcp transport. This means
most of rds_rdma.ko has no testing coverage. This series refactors the
rds self tests to add an rdma option when running tests. When used,
the test creates a pair of ROCE interfaces to run the payloads through.
Most of this set is refactoring the existing test.py module. Since most
of this code is one long procedure, it is difficult to modularize it
without creating a lot of pylint complaints about lengthy functions
with too many variables or branches.
Patch 1 fixes an RDS-IB shutdown hang exposed by the new ROCE selftests
in patches 10/11. The next seven patches break down test.py into helper
functions. After we have modularized the send/recv packet logic, we
introduce the new ROCE equivalent network configurations, add the new
command line flags to build and run the test with rdma support.
====================
Link: https://patch.msgid.link/20260518012443.2629206-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for testing rds rdma over ROCE. A new
-r flag is added to config.sh which enables the required kernel
configs for rdma. We also add a -T flag to run.sh, which takes
a transport option, tcp or rdma. The rdma option will check to
ensure the proper configs have been enabled. The flag is then
passed to test.py, which will run the test over the specified
transport(s)
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-12-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for testing rds rdma over ROCE in test.py
A new -T flag is added, which takes a transport option, tcp or rdma.
A new setup_rdma() function is added that will configure rdma
interfaces and sockets for use in the test case.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-11-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a teardown_tcp() helper that removes net0/net1.
The cmd calls here use fail=False so they can be called from
completed or partially-setup states on error. Also call
teardown_tcp() at the top of setup_tcp() so a previous
interrupted run does not leave net0/net1 lingering and break a
subsequent ip netns add. Register teardown_tcp() with atexit
before setup_tcp() is invoked.
Likewise, we can simpliy stop_pcaps() handling by registering it
with atexit instead of calling it from the signal handler.
atexit handlers run on any exit path - normal completion, raised
exception, and sys.exit() from the timeout signal handler. This
guarantees cleanup are called without further wrapping the test
body in a try/finally blocks.
atexit LIFO ordering keeps stop_pcaps before teardown_tcp so
tcpdumps are killed cleanly before their namespaces go away.
This is a preparatory cleanup for the upcoming ROCE patch which
will also register a teardown_rdma() alongside teardown_tcp()
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-10-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sockets created by child processes in netns_socket may raise
exceptions that are currently not handled by the parent. If for
example a namespace didn't exist or the rds module didn't load. Because
these exceptions occur with in a child thread, the child thread exits,
but the parent does not check the return status.
Further, allowing the child processes to quietly raise exceptions
will cause problems later if the parent registers clean up functions
with atexit. Since the child processes inherit the parents handlers,
they may prematurely call the parents cleanup routines without the
parent being aware.
Fix this by all catching exceptions raised by the child processes.
Child errors surface as a non-zero exit status, which are then
properly raised in the parent process.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-9-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the send/recv logic in test.py into a helper function,
snd_rcv_packets(). This is a preparatory refactoring for the
rds over ROCE series which can use the same function to run
the test over tcp, rdma, or both. No functional changes are
introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-8-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the verify hashes logic in test.py into a helper function,
verify_hashes(). This is a preparatory refactoring for the rds over
ROCE series that helps modularize the send/recv logic. Breaking up the
logic now will help avoid large function pylint errors later. No
functional changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist receive packet logic in test.py into a helper function,
recv_burst(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-6-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the send packet logic in test.py into a helper function,
send_burst(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-5-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the page info logic in test.py into a helper function,
check_info(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the network configs in test.py into a tcp specific helper
function, setup_tcp(). This is a preparatory refactoring for the
rds over ROCE series which will add separate function for rdma
specific configs. No functional changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
am65_cpsw_nuss_ndo_slave_add_vid() returns early at the top with:
if (!netif_running(ndev) || !vid)
return 0;
so vid is guaranteed to be non-zero in the rest of the function. The
subsequent
if (!vid)
unreg_mcast = port_mask;
is therefore unreachable. Drop the dead branch.
With that branch gone, unreg_mcast is only ever its initializer value
of zero, so drop the variable and pass 0 directly to
cpsw_ale_vlan_add_modify().
No functional change.
Found by Smatch.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/aS_lhMwppbDHoEcX@stanley.mountain
Signed-off-by: Alexander Vassilevski <oss@vassilevski.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260517220757.2679458-1-oss@vassilevski.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for configuring swapping of MDI pairs (ABCD->DCBA) when the
property "enet-phy-pair-order" is specified.
Unfortunately, no documentation about this feature is available, but
this implementation still tries to avoid magic numbers and raw register
numbers where it seems clear what is going on.
As it is unknown whether the patching step can be safely reversed, only
enabling MDI swapping is fully supported. A value of "0" for the "enet-
phy-pair-order" property is not accepted if the PHY has already been
patched for MDI swapping (however, this should not occur in practice).
Some other Realtek PHYs also support similar mechanisms:
- RTL8221B-VB-CG allows to configure MDI swapping via the same register,
but does not need the additional patching step. However, it is unclear
whether a driver implementation for that PHY is necessary, as it is
known to support configuration via strapping pins (which is working
fine at least in Zyxel XGS1210-12 rev B1).
- The patching step seems to match the one for the integrated PHYs of
some Realtek PCIe/USB NICs (see for example the r8152 driver).
For now, only implement this for the RTL8226-CG PHY, where it is needed
for the switches Zyxel XGS1010-12 rev A1 and XGS1210-12 rev A1.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://patch.msgid.link/20260516190456.387768-1-jan@3e8.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a typo and a redundant phrase in the block comment above
__sys_accept4(): "thats" -> "that's", and drop the trailing
"to recvmsg" that repeats the recvmsg() reference earlier in
the same sentence.
No functional change.
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Link: https://patch.msgid.link/20260516101109.479042-1-avinash.duduskar@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
htb_dump_class_stats() and htb_offload_aggregate_stats()
call gnet_stats_basic_sync_init(&cl->bstats) which
is wrong on 32bit arches when syncp is cleared.
Make sure to acquire qdisc spinlock and use
_bstats_set() to ease future lockless dumps.
Fixes: 8327158624 ("sch_htb: Stats for offloaded HTB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Maxim Mikityanskiy <maximmi@mellanox.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518090518.629245-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen, workqueue users must be converted to the better named
new workqueues with no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: David Ahern <dsahern@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260515135143.259669-2-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jordan Rhee says:
====================
gve: add support for PTP gettimex64
This patch series adds support to obtain near-simultaneous NIC and
system timestamps with gettimex64. This enables daemons like
chrony and phc2sys to synchronize the system clock to the NIC clock.
GVE does not have direct register access to the NIC hardware clock, so
it must issue an AdminQ command to read the NIC clock. Two paths
for obtaining a cross-timestamp are implemented: a precise path using
system counter values sampled by the device, and a fallback path using
system counter values sampled in the driver using
ptp_read_system_prets()/postts().
To use the precise path, the current system clocksource must match the
units returned by the device, which on x86 is X86_TSC and on ARM64 is
ARM_ARCH_COUNTER. The clockid requested for the cross-timestamp must
be either CLOCK_REALTIME or CLOCK_MONOTONIC_RAW. These conditions hold
by default on GCP VMs using Chrony, so we expect the precise path to be
used the vast majority of the time. If the system clocksource is changed
to kvm-clock, it activates the fallback path. Ethtool counters have been
added to count how many times each path is used.
The uncertainty window in the precise path is typically around 1-2us,
while in the fallback path is around 60-80us. This table shows a
comparison in chrony tracking statistics between the precise path and
fallback path. The RMS offset is nearly 4 orders of magnitude smaller
in the precise path.
| | Fallback Path | Precise path |
| --------------- | --------------------- | ------------------------ |
| System time | 0.000000005 s slow | 0.000000001 s fast |
| Last offset | +0.000005606 seconds | +0.000000001 seconds |
| RMS offset | 0.000009020 seconds | 0.000000002 seconds |
| Frequency | 4.115 ppm fast | 0.362 ppm fast |
| Residual freq | +2.515 ppm | +0.000 ppm |
| Skew | 18.480 ppm | 0.001 ppm |
| Root delay | 0.000000001 seconds | 0.000000001 seconds |
| Root dispersion | 0.000081905 seconds | 0.000001169 seconds |
| Update interval | 0.5 seconds | 0.5 seconds |
| Leap status | Normal | Normal |
The first two patches pave the way for the PTP implementation by
quieting excessive logging and refactoring an existing routine for
thread safety.
====================
Link: https://patch.msgid.link/20260514225842.110706-1-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable chrony and phc2sys to synchronize system clock to NIC clock.
Two paths are implemented: a precise path using system counter values
sampled by the device, and a fallback path using system counter values
sampled in the driver using ptp_read_system_prets()/postts().
To use the precise path, the current system clocksource must match the
units returned by the device, which on x86 is X86_TSC and on ARM64 is
ARM_ARCH_COUNTER. The clockid requested for the cross-timestamp must
be either CLOCK_REALTIME or CLOCK_MONOTONIC_RAW. These conditions hold
by default on GCP VMs using Chrony, so we expect the precise path to be
used the vast majority of the time. If the system clocksource is changed
to kvm-clock, it activates the fallback path. Ethtool counters have been
added to count how many times each path is used.
The uncertainty window in the precise path is typically around 1-2us,
while in the fallback path is around 60-80us.
Stub implementions of adjfine and adjtime are added to avoid NULL
dereference when phc2sys tries to adjust the clock.
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kevin Yang <yyd@google.com>
Reviewed-by: Naman Gulati <namangulati@google.com>
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260514225842.110706-4-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a mutex to protect the shared DMA buffer that receives NIC
timestamp reports. The NIC timestamp will be read from two different
threads: the periodic worker and upcoming `gettimex64`.
Move clock registration to the last step of initialization to ensure
that all data needed by the clock module is initialized before
the clock is exposed to usermode.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Ankit Garg <nktgrg@google.com>
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260514225842.110706-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AdminQ commands may return -EAGAIN under certain transient conditions.
These commands are intended to be retried by the driver, so logging
a formal error to the system log is misleading and creates
unnecessary noise.
Modify the logging logic to skip the error message when the result
is -EAGAIN, and move logging to dev_err_ratelimited() to avoid
spamming the log.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20260514225842.110706-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When roaming, the FDB destination port can change without holding the
bridge's hash lock. Therefore, add missing READ_ONCE() annotations in
both RCU readers and readers that hold the lock. In the latter case, the
annotation is not needed in places where the FDB entry was already
validated to be a local entry since such entries cannot roam.
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260517115009.175163-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, during probe defferal the driver will print multiple times:
mscc-miim e20101a8.mdio: Cannot register MDIO bus (-517)
So, lets silence that by using the dev_err_probe() for printing the probe
error as it handles probe defferal.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260515120608.706361-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modern systems may have more than 16 PPS sources and current hard-coded
limit breaks registration of some devices. Let's bump the limit to 256
in hope it will be enough in foreseen future.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://patch.msgid.link/20260515135028.2021318-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BUILD_BUG_ON() is evaluated at compile time. The same three checks
for __HWTSTAMP_TX_CNT, __HWTSTAMP_FILTER_CNT and __HWTSTAMP_FLAG_CNT
are already present earlier in this file (tsconfig_reply_size()).
Repeating them at the start of ethnl_set_tsconfig() does not
strengthen the guarantee; remove the redundant block there and
keep a single occurrence.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Link: https://patch.msgid.link/20260515032550.138572-1-zhaochenguang@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Xuan Zhuo says:
====================
eea: Add basic driver framework for Alibaba Elastic Ethernet Adaptor
Add a driver framework for EEA that will be available in the future.
This driver is currently quite minimal, implementing only fundamental
core functionalities. Key features include: I/O queue management via
adminq, basic PCI-layer operations, and essential RX/TX data
communication capabilities. It also supports the creation,
initialization, and management of network devices (netdev). Furthermore,
the ring structures for both I/O queues and adminq have been abstracted
into a simple, unified, and reusable library implementation,
facilitating future extension and maintenance.
====================
Link: https://patch.msgid.link/20260514095138.80680-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This commit adds support for ndo_get_stats64 to provide accurate
interface statistics. With the TX and RX data paths now fully functional,
it is appropriate to register the netdevice and expose the interface to
userspace.
Registered the network device via register_netdev, and updated the
corresponding unregister_netdev and dev_close routines to ensure
synchronization.
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260514095138.80680-9-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement the core logic for transmitting packets in the EEA TX path,
including packet preparation and submission to the underlying transport.
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260514095138.80680-7-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement the core logic for receiving packets in the EEA RX path,
including packet buffering and basic validation.
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260514095138.80680-6-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add basic driver framework for the Alibaba Elastic Ethernet Adapter(EEA).
This commit introduces the implementation for the netdevice open and
stop.
This commit introduces HA to restore the device when error occurs,
but in HA scenarios the driver can't ensure to restore the status
correctly.
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260514095138.80680-5-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add basic driver framework for the Alibaba Elastic Ethernet Adapter(EEA).
This commit creates the netdevice after PCI probe,
and initializes the admin queue to send commands to the device.
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Philo Lu <lulie@linux.alibaba.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260514095138.80680-4-xuanzhuo@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
