Convert the explicit mutex_lock/mutex_unlock pair in mem_write() into
a cleanup.h guard(mutex)() scope-based lock acquisition. This removes
the remaining goto-based cleanup path and keeps the lock held until
the end of the mem_write() scope.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://patch.msgid.link/20260521130848.2860219-2-zhaojinming@uniontech.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With tab=8 (Linux Kernel coding style), there are a couple of lines
misaligned in the comment ASCII tables. Fix indentation for them.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608082348.92575-1-shengchao.guo@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-ap0xxx (board ID: 8E35) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_legacy_thermal_params.
Testing on board 8E35 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Ahmet Öztürk <sivasli-ahmet@gmx.de>
Reported-by: Ahmet Öztürk <sivasli-ahmet@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221523
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260608134255.36280-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the firmware string '1583EMS1.109' to the ALLOWED_FW_10 array.
This enables Embedded Controller support, including battery charge
thresholds, for the MSI Pulse GL66 12UEK (MS-1583) laptop.
Signed-off-by: Luis de Carlos <reskoldo73@gmail.com>
Link: https://patch.msgid.link/20260527134750.25263-1-reskoldo73@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Inspiron N5110 needs the touchpad LED quirk (Vostro V130 quirk)
to properly control the touchpad LED. Add its DMI identifier
to the existing quirk table, next to the similar Inspiron M5110 entry.
Tested on Dell Inspiron N5110.
The touchpad LED works correctly with this quirk enabled.
Signed-off-by: Gleb Sonichev <sonichev555@gmail.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://patch.msgid.link/20260525100047.20046-1-sonichev555@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-ap0xxx (board ID: 8D26) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_legacy_thermal_params.
Testing on board 8D26 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Alberto Escaño <alberto_e_88@yahoo.es>
Reported-by: Alberto Escaño <alberto_e_88@yahoo.es>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221514
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260525102226.56300-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
convert_ltr_scale() emits an unconditional pr_warn() whenever an LTR row
encoded by hardware has a scale-factor field of 6 or 7 (reserved values
per the PCIe LTR ECN). The function is called twice per LTR row (snoop
+ non-snoop) by pmc_core_ltr_show(), which is invoked on every read of
/sys/kernel/debug/pmc_core/ltr_show as well as during certain platform
driver activity.
On a Meteor Lake laptop with an Intel AX210 Wi-Fi card, this produces
4-12 "Invalid LTR scale factor." lines per second in dmesg, with no
context to help identify which PMC IP / row carries the bad value.
Switch to pr_warn_once() so the warning still flags the spec violation
once per boot, and include the offending scale value in the message.
Identifying the originating LTR row would require restructuring the
caller's loop to perform the validity check itself; that is left as a
separate change.
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Mike Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260523114517.101305-1-michael.bommarito@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Added thermal support for board ID 8B2F.
Signed-off-by: yahia ahmed <yahia.a.abdrabou@gmail.com>
Link: https://patch.msgid.link/20260522203418.28784-1-yahia.a.abdrabou@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In mem_write(), the temporary array returned by
parse_int_array_user() must be released on all exit paths.
Convert the array variable to use cleanup.h scope-based
cleanup so it is freed automatically on return.
This also moves the array declaration next to
parse_int_array_user() as required by cleanup.h usage
guidelines.
Fixes: 8e0a2fc68e ("platform/x86/intel/tpmi: Use 32 bit aligned address for debugfs mem write")
Cc: stable@vger.kernel.org
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://patch.msgid.link/20260521130848.2860219-1-zhaojinming@uniontech.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
OneXPlayer Super X identifies itself via DMI as:
board vendor: ONE-NETBOOK
board name: ONEXPLAYER SUPER X
product name: ONEXPLAYER SUPER X
Current mainline oxpec does not contain a matching DMI entry for this
system, so the in-tree driver is not auto-loaded.
The tested Super X fan, PWM, turbo-toggle, and battery charge-control EC
layout matches the existing ONEXPLAYER G1 A handling.
Add a DMI match for OneXPlayer Super X and reuse the oxp_g1_a board data.
Reviewed-by: Derek J Clark <derekjohn.clark@gmail.com>
Reviewed-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Alexander Egorov <begeebe@gmail.com>
Link: https://patch.msgid.link/20260519155124.3240359-1-begeebe@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Avoid symlink-based pidfile clobbering by opening the pidfile with
O_NOFOLLOW and validating it with fstat() before locking/writing.
The daemon currently uses a fixed pidfile path under /tmp. A local
unprivileged user can pre-create a symlink at that path and cause a
root-run daemon instance to write into an attacker-chosen file.
Fixes: 7fd786dfbd ("tools/power/x86/intel-speed-select: OOB daemon mode")
Signed-off-by: Ali Ahmet MEMIS <dev@unknownbbqr.xyz>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@kernel.org
Add a SAM client device node group and registry entry for the
Microsoft Surface Pro, 12-inch with Snapdragon.
This set enables the use of the following devices.
1: cover keyboard
2: cover touchpad
3: pen stash events.
The battery info and charger info devices have been
purposefully omitted as they are also reported by
other drivers and cause conflicts.
Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
Link: https://patch.msgid.link/ab458aadea651396d9ea7629419a32dc7510c593.1778822464.git.harrison.vanderbyl@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_wq, which will be deprecated soon and replaced by
system_percpu_wq.
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
The function(s) mentioned earlier, end up calling __queue_delayed_work(),
which set a global timer that could fire anywhere, enqueuing the work
where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption.
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_wq with system_dfl_wq so that the work may benefit from
scheduler task placement.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260515145851.318787-1-marco.crivellari@suse.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260519154040.1594878-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching all these arrays, unify usage of whitespace in the list
terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20260519144341.1589034-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo GameZone/Other interfaces have some delicate divergences
among different devices. When making a bug report or adding support for
new devices/interfaces, capdata is the most important information to
cross-check with.
Add a debugfs file (lenovo_wmi/<device_name>/capdata), so that users can
dump capdata and include it in their reports.
Since `struct capdata01' is just an extension to `struct capdata00',
also convert the former to include the latter anonymously
(-fms-extensions, since v6.19). This is declared as a union in the
capdata01 struct, with both the anonymous declaration and as a named
member to avoid type casting when passing just the capdata00 struct
pointer.
Tested-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
We are about to add debugfs support for lenovo-wmi-capdata. Let's setup
a debugfs directory called "lenovo_wmi" for tidiness, so that any
lenovo-wmi-* device can put its subdirectory under the directory.
Subdirectories will be named after the corresponding WMI devices.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some Lenovo BIOS have been shown to have incomplete and/or broken
capability data and WMI attribute IDs. In some cases the capability data
reports that a feature is not supported when the get/set methods are
fully implemented. It is also possible that the ACPI methods from the
ideapad_laptop driver we defer to could be bugged while the WMI method
is fully working. To aid end users in submitting more complete bug
reports in these situations, add an override to skip the ACPI and
compatibility checks to force load the power supply extension as if it
is fully supported and has no conflicts.
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add charge_behaviour and charge_types attributes through a power supply
extension for devices that support WMI based charge enable & disable.
Lenovo Legion devices that implement WMI function and capdata ID
0x03010001 in their BIOS are able to enable or disable charging at 80%
through the lenovo-wmi-other interface. Add a charge_types attribute for
BATX devices to expose this capability with Standard and Long_Life types
enabled.
Additionally, devices that support WMI function and capdata ID 0x03020000
are able to force discharge of the battery. Expose this capability with
a charge_behaviour attribute in the power supply extension, with the auto
and force-discharge behaviors enabled. The GET method for this attribute
is bugged. After analyzing the DSDT, and some testing, it appears the
method grabs bit(3) instead of bit(4) from the EC register that stores the
current status, and will only report if charging has been inhibited or
not. To work around this, store and report the last setting written to the
attribute.
As some devices only expose one attribute or the other, a bitmask is
added with a lookup table and some helper macros to select the correct
configuration for the hardware at runtime.
The ideapad_laptop driver provides the charge_types attribute to provide
similar functionality. When the WMI method is set this can corrupt the
ACPI method return and cause hardware and driver errors. To avoid
conflicts between the drivers, we get the acpi_handle and do the same
check that ideapad_laptop does when it enables the feature. If the
feature is supported in ideapad_laptop, abort adding the extension from
lenovo-wmi-other. The ACPI method is more reliable when both are
present from my testing, so we can prefer that implementation and do
not need to worry about de-conflicting from inside that driver.
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In the next patch a power supply extension is added which requires
a name attribute. Instead of creating another const macro with the
same information, rename LWMI_OM_FW_ATTR_BASE_PATH to
LWMI_OM_SYSFS_NAME.
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-4-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use an enum for all GPU attribute feature ID's and add GPU attributes.
Reviewed-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use an enum for all device ID's and CPU attribute feature ID's,
add missing CPU attributes.
Reviewed-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-2-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If the DW5826e is in a frozen state and unable to receive USB commands,
this driver provides a method for the user to reset the DW5826e via ACPI.
E.g: echo 1 > /sys/bus/platform/devices/PALC0001\:00/wwan_reset
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Jack Wu <jackbb_wu@compal.com>
Link: https://patch.msgid.link/20260526-dell-reset-v8-v8-1-d3a29cb4cf2f@compal.com
[ij: removed default m]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enable battery charge modes on supported TUXEDO devices by adding the
feature bit to the respective device descriptors.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260512232145.329260-9-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Many Uniwill-based devices do not supports the already existing
charge limit functionality, but instead support an alternative
interface for controlling the battery charge algorithm.
Add support for this interface and update the documentation.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-8-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turned out that EC_ADDR_OEM_4 also contains bits with a volatile
nature. Mark the whole register as volatile to prepare for the usage
of said bits. This also means that we now have to save/restore the
touchpad toggle state ourself.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-7-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently the suspend handling for the FN lock and super key enable
features saves the whole values of the affected registers instead of
the individual feature state. This duplicates the register access
logic from the associated sysfs attributes.
Rework the suspend handling to reuse said register access logic and
only store the individual feature state as a boolean value.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-6-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The newly added driver requires the LED classdev support
and causes a link failure when that is disabled:
x86_64-linux-ld: vmlinux.o: in function `bitland_mifs_wmi_probe':
bitland-mifs-wmi.c:(.text+0xede02a): undefined reference to `devm_led_classdev_register_ext'
Fixes: dc1ec4fa86 ("platform/x86: bitland-mifs-wmi: Add new Bitland MIFS WMI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260519202804.1339581-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_keys_acpi_driver in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the input device registered by the driver will appear
under the platform device used for driver binding.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/2002306.taCxCBeP46@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_ipml_acpi_driver in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the backlight and rfkill devices registered by the
driver will appear under the platform device used for driver binding.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/3753883.R56niFO833@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_tablet_acpi_driver in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the input device registered by the driver will appear
under the platform device used for driver binding.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/4504318.ejJDZkT8p0@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_accel_acpi_driver in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the input device registered by the driver will
appear under the platform device used for driver binding, but the sysfs
attribute added by the driver under the ACPI companion of that device
will stay there in case there are utilities in user space expecting
it to be present there.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/24365138.6Emhk5qWAg@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_accel_acpi_driver_v4 in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the input device registered by the driver will
appear under the platform device used for driver binding, but the sysfs
attributes added by the driver under the ACPI companion of that device
will stay there in case there are utilities in user space expecting
them to be present there.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/3609276.QJadu78ljV@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to using struct
platform_driver instead of struct acpi_driver, make it install its ACPI
notify handlers directly instead of using struct acpi_driver .notify()
callbacks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/1856277.VLH7GnMWUR@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since cmpc_add_acpi_notify_device() and cmpc_remove_acpi_notify_device()
have been modified to take a plain struct device pointer as the first
argument, then have nothing to do with ACPI in principle, so rename
them to cmpc_add_notify_device() and cmpc_remove_notify_device(),
respectively, and consolidate white space around the call sites of
the former.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/3338539.5fSG56mABF@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to using struct
platform_driver instead of struct acpi_driver, modify two helper
functions in it, cmpc_add_acpi_notify_device() and
cmpc_remove_acpi_notify_device(), to take a struct device pointer
argument instead of a struct acpi_device pointer argument and update
their callers accordingly.
While at it, change the return type of cmpc_remove_acpi_notify_device()
to void because its return value is never checked.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/9615385.CDJkKcVGEf@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent modifications, change code ordering in
cmpc_accel_add_v4(), cmpc_accel_add(), and cmpc_accel_remove_v4()
so that the ordering of the probe rollback code is the same as the
ordering of the corresponding removal code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/2036641.PYKUYFuaPT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Switch over cmpc_accel_add_v4() and cmpc_accel_add() to using
devm_kzalloc() for allocating the accel object which will cause it
to be freed automatically on device removal, so it won't be leaked
any more.
This also simplifies the rollback paths in these functions somewhat.
Fixes: 529aa8cb0a ("classmate-laptop: add support for Classmate PC ACPI devices")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/10846403.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use devm_kzalloc() and devm_input_allocate_device() in
ebook_switch_probe() for allocating the button object and the
input device, respectively, to simplify the rollback path in
that function and ebook_switch_remove().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/6015220.DvuYhMxLoT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 wireless-hotkey driver.
Fixes: 8507277ef1 ("platform/x86: wireless-hotkey: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3899916.MHq7AAxBmi@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_haps driver.
Fixes: 3a96c7915d ("platform/x86: toshiba_haps: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2285136.Mh6RI2rZIc@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_bluetooth driver.
Fixes: 553b2ac59f ("platform/x86: toshiba_bluetooth: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2715450.Lt9SDvczpP@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_acpi driver.
Fixes: 246d6cefe5 ("platform/x86: toshiba_acpi: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/1973170.CQOukoFCf9@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 system76 driver.
Fixes: 80b8f68b94 ("platform/x86: system76: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2072699.usQuhbGJ8B@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 sony-laptop driver.
Fixes: 138db7ee58 ("platform/x86: sony-laptop: Convert PIC driver to a platform one")
Fixes: 14004dd31c ("platform/x86: sony-laptop: Convert NC driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/1871155.VLH7GnMWUR@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 panasonic-laptop driver.
Fixes: de6837243a ("platform/x86: panasonic-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3353471.5fSG56mABF@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 lg-laptop driver.
Fixes: 2d9cb20610 ("platform/x86: lg-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3706551.iIbC2pHGDl@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
