This patch fixes wrong description in printed log:
"SSA and SIT" -> "SIT and SSA"
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When the flexible_inline_xattr feature is enabled, do_read_inode() loads
the on-disk i_inline_xattr_size unconditionally:
if (f2fs_sb_has_flexible_inline_xattr(sbi))
fi->i_inline_xattr_size = le16_to_cpu(ri->i_inline_xattr_size);
but sanity_check_inode() only range-checks it when the inode also has the
FI_INLINE_XATTR flag set. An inode that carries an inline dentry or inline
data but not FI_INLINE_XATTR -- the normal layout for an inline
directory -- therefore keeps a fully attacker-controlled
i_inline_xattr_size from a crafted image.
get_inline_xattr_addrs() returns that value with no flag gating, so it
feeds the inode geometry:
MAX_INLINE_DATA() = 4 * (CUR_ADDRS_PER_INODE - i_inline_xattr_size - 1)
NR_INLINE_DENTRY() = MAX_INLINE_DATA() * BITS_PER_BYTE / (...)
addrs_per_page() = CUR_ADDRS_PER_INODE - i_inline_xattr_size
A large i_inline_xattr_size drives MAX_INLINE_DATA() and NR_INLINE_DENTRY()
negative, so make_dentry_ptr_inline() sets d->max (int) to a negative
value. The inline directory walk then compares an unsigned long bit_pos
against that negative d->max, which is promoted to a huge unsigned bound,
and reads far past the inline area:
while (bit_pos < d->max) /* fs/f2fs/dir.c */
... test_bit_le(bit_pos, d->bitmap) / d->dentry[bit_pos] ...
Mounting a crafted image and reading such a directory triggers an
out-of-bounds read in f2fs_fill_dentries(); the same underflow also
corrupts ADDRS_PER_INODE for regular files.
Validate i_inline_xattr_size against MAX_INLINE_XATTR_SIZE whenever the
flexible_inline_xattr feature is enabled -- i.e. whenever the value is
loaded from disk and consumed -- and keep the lower MIN_INLINE_XATTR_SIZE
bound gated on inodes that actually carry an inline xattr, so legitimate
inodes with i_inline_xattr_size == 0 are still accepted.
Cc: stable@vger.kernel.org
Fixes: 6afc662e68 ("f2fs: support flexible inline xattr size")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_acl_count() only validates the aggregate ACL xattr length. A
malformed ACL can still place ACL_USER or ACL_GROUP in a slot that only
contains struct f2fs_acl_entry_short bytes, and f2fs_acl_from_disk()
then reads entry->e_id before verifying that a full entry fits.
Require a short entry before reading e_tag and e_perm, and require a
full entry before reading e_id for ACL_USER and ACL_GROUP. Return
-EFSCORRUPTED from these new truncated-entry checks, while keeping the
pre-existing -EINVAL paths unchanged.
Validation reproduced this kernel report:
KASAN slab-out-of-bounds in __f2fs_get_acl+0x6fb/0x7e0
RIP: 0033:0x7f4b835ea7aa
The buggy address belongs to the object at ffff888114589960 which belongs
to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of allocated 8-byte
region [ffff888114589960, ffff888114589968)
Read of size 4
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xce/0x630 (?:?)
__f2fs_get_acl+0x6fb/0x7e0 (fs/f2fs/acl.c:169)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x224/0x430 (?:?)
kasan_report+0xe0/0x110 (?:?)
__f2fs_get_acl+0x5/0x7e0 (fs/f2fs/acl.c:169)
__get_acl+0x281/0x380 (?:?)
vfs_get_acl+0x10b/0x190 (?:?)
do_get_acl+0x2a/0x410 (?:?)
do_get_acl+0x9/0x410 (?:?)
do_getxattr+0xe8/0x260 (?:?)
filename_getxattr+0xd1/0x140 (?:?)
do_getname+0x2d/0x2d0 (?:?)
path_getxattrat+0x16c/0x200 (?:?)
lock_release+0xc8/0x290 (?:?)
cgroup_update_frozen+0x9d/0x320 (?:?)
lockdep_hardirqs_on_prepare+0xea/0x1a0 (?:?)
trace_hardirqs_on+0x1a/0x170 (?:?)
_raw_spin_unlock_irq+0x28/0x50 (?:?)
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Cc: stable@kernel.org
Fixes: af48b85b8c ("f2fs: add xattr and acl functionalities")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit 9609dd7047.
The kernel panics are keeping to be reported especially when the f2fs
partition get almost full. By investigation, we find that the reason is
one f2fs page got freed to buddy without being deleted from LRU and the
root cause is the race happened in [2] which is enrolled by this commit.
There are 3 race processes in this scenario, please find below for their
main activities.
The changed code in move_data_block() lets the GC path evict the tail-end
folio from the page cache through folio_end_dropbehind(). Once
folio_unmap_invalidate() removes the folio from mapping->i_pages, the
page-cache references for all pages in the folio are dropped. The folio
is then kept alive only by temporary external references, which allows a
later split to operate on a folio whose subpages are no longer protected
by page-cache references.
After the page-cache references are gone, split_folio_to_order() can
split the big folio into individual pages and put the resulting subpages
back on the LRU. For tail pages beyond EOF, split removes them from the
page cache and drops their page-cache references. A tail page can then
remain on the LRU with PG_lru set while holding only the split caller's
temporary reference. When free_folio_and_swap_cache() drops that final
reference, the page enters the final folio_put() release path.
In parallel, folio_isolate_lru() can observe the same tail page with a
non-zero refcount and PG_lru set. It clears PG_lru before taking its own
reference. If this races with the final folio_put() from the split path,
__folio_put() sees PG_lru already cleared and skips lruvec_del_folio().
The page is then freed back to the allocator while its lru links are
still present in the LRU list. A later LRU operation on a neighboring
page detects the stale link and reports list corruption.
[1]
[ 22.486082] list_del corruption. next->prev should be fffffffec10e0ac8, but was dead000000000122. (next=fffffffec10e0a88)
[ 22.486130] ------------[ cut here ]------------
[ 22.486134] kernel BUG at lib/list_debug.c:67!
[ 22.486141] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 22.488502] Tainted: [W]=WARN, [O]=OOT_MODULE
[ 22.488506] Hardware name: Spreadtrum UMS9230 1H10 SoC (DT)
[ 22.488511] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 22.488517] pc : __list_del_entry_valid_or_report+0x14c/0x154
[ 22.488531] lr : __list_del_entry_valid_or_report+0x14c/0x154
[ 22.488539] sp : ffffffc08006b830
[ 22.488542] x29: ffffffc08006b868 x28: 0000000000003020 x27: 0000000000000000
[ 22.488553] x26: 0000000000000000 x25: 0000000000000004 x24: fffffffec10e0ac0
[ 22.488564] x23: 00000000000000e8 x22: 0000000000000024 x21: dead000000000122
[ 22.488574] x20: fffffffec10e0a88 x19: fffffffec10e0ac8 x18: ffffffc080061060
[ 22.488585] x17: 20747562202c3863 x16: 6130653031636566 x15: 0000000000000058
[ 22.488595] x14: 0000000000000004 x13: ffffff80f91e0000 x12: 0000000000000003
[ 22.488605] x11: 0000000000000003 x10: 0000000000000001 x9 : ffe85721f0e25f00
[ 22.488615] x8 : ffe85721f0e25f00 x7 : 0000000000000000 x6 : 6c65645f7473696c
[ 22.488625] x5 : ffffffed39b23026 x4 : 0000000000000000 x3 : 0000000000000010
[ 22.488636] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 000000000000006d
[ 22.488647] Call trace:
[ 22.488651] __list_del_entry_valid_or_report+0x14c/0x154 (P)
[ 22.488661] __folio_put+0x2bc/0x434
[ 22.488670] folio_put+0x28/0x58
[ 22.488678] do_garbage_collect+0x1a34/0x2584
[ 22.488689] f2fs_gc+0x230/0x9b4
[ 22.488697] f2fs_fallocate+0xb90/0xdf4
[ 22.488706] vfs_fallocate+0x1b4/0x2bc
[ 22.488716] __arm64_sys_fallocate+0x44/0x78
[ 22.488725] invoke_syscall+0x58/0xe4
[ 22.488732] do_el0_svc+0x48/0xdc
[ 22.488739] el0_svc+0x3c/0x98
[ 22.488747] el0t_64_sync_handler+0x20/0x130
[ 22.488754] el0t_64_sync+0x1c4/0x1c8
[2]
CPU0 (f2fs GC) CPU1 (split_folio_to_order) CPU2 (folio_isolate_lru)
F: pagecache refs = n
F: extra refs = GC + split
F: PG_lru set
move_data_block()
folio = f2fs_grab_cache_folio(F)
...
__folio_set_dropbehind(F)
folio_unlock(F)
folio_end_dropbehind(F)
folio_unmap_invalidate(F)
__filemap_remove_folio(F)
folio_put_refs(F, n)
folio_put(F)
split_folio_to_order(F)
folio_ref_freeze(F, 1)
...
lru_add_split_folio(T)
list_add_tail(&T->lru, &F->lru)
folio_set_lru(T)
__filemap_remove_folio(T)
folio_put_refs(T, 1)
/* T refcount == 1, PageLRU set */
folio_isolate_lru(T)
folio_test_clear_lru(T)
free_folio_and_swap_cache(T)
folio_put(T)
/* refcount: 1 -> 0 */
__folio_put(T)
__page_cache_release(T)
folio_test_lru(T) == false
/* skip lruvec_del_folio(T) */
free_frozen_pages(T)
folio_get(T)
lruvec_del_folio(T)
later:
list_del(adjacent->lru)
next == &T->lru
next->prev == LIST_POISON / PCP freelist
BUG
Cc: stable@vger.kernel.org
Fixes: 9609dd7047 ("f2fs: remove non-uptodate folio from the page cache in move_data_block")
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Prepare for running most of the write completion work asynchronously.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Rename f2fs_post_read_wq into f2fs_wq. Create it unconditionally.
Prepare for using this workqueue for completing write bios.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use bio frontpadding to allocate memory for a work_struct when
allocating a bio.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS large folios are only enabled for immutable non-compressed files.
Writable open and writable mmap reject such mappings, but truncate(2)
through f2fs_setattr() misses the same guard.
If FS_IMMUTABLE_FL is cleared while the inode is still cached, the mapping
can keep large-folio support and ATTR_SIZE can change i_size. Reject size
changes in that state.
Cc: stable@kernel.org
Fixes: 05e65c14ea ("f2fs: support large folio for immutable non-compressed case")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs dentry lookup path can use the on-disk name length before
checking that the name fits in the dentry filename area. A corrupted
dentry can then make lookup read beyond the filename slots.
The bounds check needs to happen before any comparison that consumes
the name length from disk.
Reject dentries with invalid name lengths before comparing their names.
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Inline dentry conversion copies names out of the inline dentry area
before checking that each recorded name length fits in the available
filename slots.
A corrupted image can therefore make the conversion path read past
the inline filename storage while building the regular dentry block.
Validate each inline dentry name length against the inline filename
area before copying it.
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <samuel.moelius@trailofbits.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When updating an atomic-write file, f2fs_write_begin() may read the
previously written data back from the COW inode:
prepare_atomic_write_begin() locates the block in the COW inode and sets
use_cow, and the read bio is then built with the COW inode:
f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode,
...);
and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption
(STEP_DECRYPT) for the bio based on that inode via
fscrypt_inode_uses_fs_layer_crypto().
However, the folio being filled belongs to the original inode
(folio->mapping->host == inode), and the data stored in the COW block was
encrypted (or left as plaintext) using the original inode's context, not
the COW inode's -- see f2fs_encrypt_one_page(), which keys off
fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise
operates on folio->mapping->host.
The COW inode is created as a tmpfile in the parent directory and inherits
its encryption policy from there. With test_dummy_encryption the newly
created COW inode gets the dummy policy and becomes encrypted, while a
pre-existing regular file -- created before the policy applied, e.g.
already present in the on-disk image -- stays unencrypted. The read
path then sets STEP_DECRYPT based on the encrypted COW inode and calls
fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted
original inode) has a NULL ->i_crypt_info, dereferencing it:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310
Workqueue: f2fs_post_read_wq f2fs_post_read_work
Call Trace:
fscrypt_decrypt_bio+0x1eb/0x340
f2fs_post_read_work+0xba/0x140
process_one_work+0x91c/0x1a40
worker_thread+0x677/0xe90
kthread+0x2bc/0x3a0
The COW inode is only needed to locate the on-disk block, and that block
address is already resolved into @blkaddr by prepare_atomic_write_begin()
via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads
from that physical @blkaddr directly, so the inode argument only selects
the post-read crypto context, not which block is fetched. Reading with
@inode therefore returns the same (latest, not-yet-committed) COW data,
while making both the fs-layer decryption decision and the inline crypto
path use the correct (original inode's) key.
With the COW inode no longer used at the read site, the use_cow flag has no
remaining consumer; drop it from f2fs_write_begin() and
prepare_atomic_write_begin().
Fixes: 591fc34e1f ("f2fs: use cow inode data when updating atomic write")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
prepare_write_begin() first gets the inode folio and builds a dnode,
then checks the read extent cache. For an ordinary overwrite of a
non-inline and non-compressed file, an extent-cache hit already gives the
data block address and the following path does not need to allocate or
update any node state.
Check the read extent cache before fetching the inode folio for that
narrow case. Keep the existing paths for inline data, compressed files,
and writes that may extend past EOF, where the helper may need inline
conversion, compression preparation, or block reservation.
This avoids a node-folio lookup in the buffered overwrite fast path when
the mapping is already cached.
In a QEMU/KASAN x86_64 VM, using a small buffered overwrite workload on
an existing 1MiB file, median time improved as follows:
64-byte overwrites: 1724.93 ns/write -> 1560.24 ns/write
256-byte overwrites: 1713.38 ns/write -> 1577.85 ns/write
Function profiling of 20k 64-byte overwrites showed
f2fs_get_inode_folio() calls drop from 20004 to 4.
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A partial atomic write reserves a block in the COW inode before reading the
original data page for the untouched bytes in that page.
If that read fails, write_begin returns an error but leaves the COW inode
entry as NEW_ADDR. A retry of the same partial write then finds the COW
entry, treats it as existing COW data, and f2fs_write_begin() zeroes the
whole folio because blkaddr is NEW_ADDR.
If the retry is committed, the bytes outside the retried write range are
committed as zeroes instead of preserving the original file contents.
Only use the COW inode as the read source when it already has a real data
block. If the COW entry is still NEW_ADDR, treat it as a reservation to
reuse: keep reading the old data from the original inode and avoid
reserving or accounting the same atomic block again.
Cc: stable@kernel.org
Fixes: 3db1de0e58 ("f2fs: change the current atomic write way")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_recover_orphan_inodes() trusts the orphan block entry_count when
replaying orphan inodes from the checkpoint pack. A corrupted entry_count
larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the
ino[] array and interpret footer or following data as inode numbers.
On a crafted image, mounting an unpatched kernel can drive orphan recovery
into f2fs_bug_on() and panic the kernel. Validate entry_count before
consuming entries so corrupted checkpoint data fails the mount with
-EFSCORRUPTED and requests fsck instead.
Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be
recorded in the superblock s_errors[] field. This gives fsck a persistent
hint even though mount-time orphan recovery failure may leave no chance to
persist SBI_NEED_FSCK through a checkpoint.
Cc: stable@kernel.org
Fixes: 127e670abf ("f2fs: add checkpoint operations")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
io_uring can pass a per-I/O write stream through kiocb->ki_write_stream,
and block direct I/O propagates that value to bio->bi_write_stream.
F2FS added FDP stream mapping for DATA writes, but its direct write
submit hook always rewrites bio->bi_write_stream from the inode write
hint and F2FS temperature. As a result, a direct write with an explicit
io_uring write_stream is submitted to the F2FS-selected stream instead
of the user-requested stream.
Validate an explicit write stream before starting F2FS direct I/O, pass
the kiocb through the iomap private pointer, and preserve the per-I/O
stream in the direct write bio. When no per-I/O stream is supplied, keep
using the existing F2FS temperature-to-stream mapping.
Fixes: 42f7a7a50a33 ("f2fs: map data writes to FDP streams")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit ae27d62e6b ("f2fs: check in-memory sit version bitmap") added
a mirror for sit version bitmap, it expects to detect in-memory
corruption, however we never got any reports from the check points
for almost decade, let's remove the code, it can help to save
memories.
Cc: wallentx <william.allentx@gmail.com>
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit 355e78913c ("f2fs: check in-memory block bitmap") added
a mirror for valid block bitmap, it expects to detect in-memory
corruption, however we never got any reports from the check points
for almost decade, let's remove the code, it can help to save
memories.
Cc: wallentx <william.allentx@gmail.com>
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS records image errors and checkpoint-stop reasons through the same
s_error_work worker. The ordinary f2fs_handle_error() path only updates
s_errors, but the worker still calls fserror_report_shutdown()
unconditionally after committing the superblock.
As a result, a metadata corruption report can be followed by a synthetic
FAN_FS_ERROR event with ESHUTDOWN and an invalid superblock file handle,
even though no stop reason was recorded.
Track whether save_stop_reason() actually changed the stop_reason array
and only report the shutdown fserror for that case. Pure s_errors updates
still commit the superblock, but no longer generate a false shutdown event.
Fixes: 50faed607d32 ("f2fs: support to report fserror")
Cc: stable@kernel.org
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS_COMPRESS_INO() uses NM_I(sbi)->max_nid as the synthetic inode
number for the compressed page cache inode. That inode only exists when
the compress_cache mount option is enabled.
When compress_cache is disabled, max_nid is outside the valid inode
range. A corrupted directory entry that points to ino == max_nid should
therefore be rejected by f2fs_check_nid_range(). However, is_meta_ino()
currently treats F2FS_COMPRESS_INO() as a meta inode unconditionally,
so f2fs_iget() bypasses do_read_inode() and its nid range check, and
instantiates a fake internal inode instead.
Gate the compressed cache inode case on COMPRESS_CACHE, matching
f2fs_init_compress_inode(). With compress_cache disabled, ino ==
max_nid now follows the normal inode path and is rejected as an
out-of-range nid.
Cc: stable@kernel.org
Fixes: 6ce19aff0b ("f2fs: compress: add compress_inode to cache compressed blocks")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_write_single_node_folio() takes an io_type argument, but still
passes FS_GC_NODE_IO to __write_node_folio() unconditionally.
This was harmless while the helper was only used by
f2fs_move_node_folio(), whose caller passes FS_GC_NODE_IO. However,
commit fe9b8b30b9 ("f2fs: fix inline data not being written to disk
in writeback path") made f2fs_inline_data_fiemap() call the helper with
FS_NODE_IO for FIEMAP_FLAG_SYNC.
Honor the caller supplied io_type so inline-data FIEMAP sync writeback is
accounted as normal node IO instead of GC node IO, while the GC path
continues to pass FS_GC_NODE_IO explicitly.
Cc: stable@kernel.org
Fixes: fe9b8b30b9 ("f2fs: fix inline data not being written to disk in writeback path")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_read_data_large_folio() can keep a read bio across multiple
readahead folios. If a later folio hits an error before any of its
blocks are added to the bio, folio_in_bio is false and the current error
path returns immediately after ending that folio.
This can leave the bio accumulated for earlier folios unsubmitted. Those
folios then never receive read completion, and readers can wait
indefinitely on the locked folios.
Route errors through the common out path so any pending bio is submitted
before returning. Stop consuming more readahead folios once an error is
seen, and only wait on and clear the current folio when it was actually
added to the bio.
Cc: stable@kernel.org
Fixes: a5d8b9d94e ("f2fs: fix to unlock folio in f2fs_read_data_large_folio()")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink
- f2fs_gc
- gc_data_segment
- ra_data_block(cow_inode)
- mapping = F2FS_I(inode)->atomic_inode->i_mapping
: f2fs_is_cow_file(cow_inode) is true
- f2fs_evict_inode(atomic_inode)
- clear_inode_flag(fi->cow_inode, FI_COW_FILE)
- F2FS_I(fi->cow_inode)->atomic_inode = NULL
...
- truncate_inode_pages_final(atomic_inode)
- f2fs_grab_cache_folio(mapping)
: create folio in atomic_inode->mapping
- clear_inode(atomic_inode)
- BUG_ON(atomic_inode->i_data.nrpages)
We need to add a reference on fi->atomic_inode before using its mapping
field during garbage collection, otherwise, it will cause UAF issue.
Cc: stable@kernel.org
Cc: Daeho Jeong <daehojeong@google.com>
Cc: Sunmin Jeong <s_min.jeong@samsung.com>
Fixes: 3db1de0e58 ("f2fs: change the current atomic write way")
Fixes: f18d007693 ("f2fs: use meta inode for GC of COW file")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we mount device w/ gc_merge mount option, we may suffer below
potential deadlock:
Kworker GC trehad Truncator
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- folio_start_writeback --- set writeback flag on folio
- f2fs_outplace_write_data
: cached folio in internal bio cache
- f2fs_balance_fs
- wake_up(gc_thread)
: wake up gc thread to run foreground GC
- finish_wait(fggc_wq)
: wait on the waitqueue --- wait on GC thread to finish the work
- truncate_inode_pages_range
- __filemap_get_folio(, FGP_LOCK) --- lock folio
- truncate_inode_partial_folio
- folio_wait_writeback --- wait on writeback being cleared
- do_garbage_collect
- move_data_page
- f2fs_get_lock_data_folio
- lock on folio --- blocked on folio's lock
In order to avoid such deadlock, let's call below functions to commit
cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did
in NOGC_MERGE path.
- f2fs_submit_merged_write(sbi, DATA);
- f2fs_submit_all_merged_ipu_writes(sbi);
Cc: stable@kernel.org
Fixes: 351df4b201 ("f2fs: add segment operations")
Cc: Ruipeng Qi <ruipengqi3@gmail.com>
Reported: Sandeep Dhavale <dhavale@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Chao Yu <chaseyu@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In order to troubleshoot in which step we may block on during
mount w/ checkpoint_disable mount option.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
F2FS did not collect iostat latency for direct IO reads and writes,
hook iomap_dio_ops.submit_io to bind an iostat context and record the
submission timestamp. Replace bi_end_io with f2fs_dio_end_bio() to
collect IO latency on completion before calling back to the original
iomap_dio_bio_end_io(), to add iostat latency tracking support for
F2FS DIO.
Signed-off-by: shengyong1 <shengyong1@xiaomi.com>
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In large section mode, do_garbage_collect() previously determined the
section's representative type by looking only at the first segment of
the section. However, if data was fsynced into an area previously used
as a node section, and this area is recovered during roll-forward
recovery after sudden power off (SPO), GC would incorrectly assume the
section's type based on an empty or obsolete first segment. This caused
the recovered data segment to be misunderstood as being stuck inside a
node section, triggering false inconsistency panics (Inconsistent
segment type in SSA and SIT) and subsequent mount failures.
This patch optimizes do_garbage_collect() to determine the section's
representative type by identifying the first segment that actually
contains valid blocks (valid_blocks > 0) during the main GC loop. This
eliminates false alarms from empty/obsolete leading segments while
maintaining strict section-level type consistency checks for genuine
corruption.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add trace_f2fs_fault_report to trigger reporting upon f2fs_bug_on,
need_fsck, stop_checkpoint, and handle_eio. Since f2fs_bug_on and
need_fsck can be triggered in hundreds of scenarios, define set_sbi_flag
as a macro to help capture the effective fault function and line number.
Signed-off-by: shengyong1 <shengyong1@xiaomi.com>
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
nat_cnt[] is updated while callers hold nat_tree_lock, but F2FS samples
the counters locklessly in f2fs_available_free_memory(),
excess_dirty_nats(), and excess_cached_nats(). Those helpers only steer
cache reclaim and background sync heuristics; they do not control NAT
entry lifetime or checkpoint correctness.
Document the intent with data_race(READ_ONCE()) and a short comment
instead of adding locking to the balance path.
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs stores mount-wide activity timestamps in sbi->last_time[] and
samples them from background discard, GC, and balance paths without a
dedicated lock. The timestamps are used as best-effort heuristics to
decide whether background work should run now or sleep a bit longer.
The current helpers use plain loads and stores, so KCSAN can report races
between frequent foreground updates and background readers. Exact
freshness is not required here, but the intentional lockless accesses
should be marked explicitly.
Use WRITE_ONCE() in f2fs_update_time() and READ_ONCE() in
f2fs_time_over() and f2fs_time_to_wait(). This preserves the existing
heuristic behavior and avoids adding locking to hot paths.
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When __destroy_extent_node() sets the inode flag FI_NO_EXTENT, it does
not reset the length of the largest extent to 0 and update the inode
folio. Since modifications to the extent tree are disallowed afterward,
the cached largest extent may become stale. This can trigger the
following error in xfstests generic/388:
F2FS-fs (dm-0): sanity_check_extent_cache: inode (ino=1761) extent info [220057, 57, 6] is incorrect, run fsck to fix
In the f2fs_drop_inode path, __destroy_extent_node() does not need to
guarantee that et->node_cnt is 0, because concurrency with writeback
is expected in this path, and writeback may update the extent cache.
This patch reverts commit ed78aeebef ("f2fs: fix node_cnt race between
extent node destroy and writeback"), and remove the unnecessary zero
check of et->node_cnt.
Fixes: ed78aeebef ("f2fs: fix node_cnt race between extent node destroy and writeback")
Cc: stable@vger.kernel.org
Reported-by: Chao Yu <chao@kernel.org>
Suggested-by: Chao Yu <chao@kernel.org>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to report fserror, it provides another way to let
userspace to monitor filesystem level error. In addition, it exports
/sys/fs/f2fs/features/fserror once f2fs kernel module start to support
the new feature, then generic/791 of fstests can notice the feature,
and verify validation of fserror report.
Cc: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
From: Wenjie Qi <qiwenjie@xiaomi.com>
F2FS already classifies DATA writes using its existing hot, warm and cold
temperature policy, but it only passes that intent down as a write hint.
That hint alone is not sufficient for NVMe FDP placement, because the
current NVMe command path consumes `bio->bi_write_stream` rather than
`bio->bi_write_hint` when selecting a placement ID.
When the target block device exposes write streams, map the existing F2FS
DATA temperature classes onto stream IDs and set `bio->bi_write_stream`
for both buffered and direct writes. If the device exposes no write
streams, keep the current behavior by leaving the stream unset.
The stream mapping is evaluated against the target block device of each
bio, so the existing per-device fallback behavior stays unchanged for
multi-device filesystems. Existing blkzoned restrictions also remain in
place.
The mapping is intentionally small and deterministic:
- 1 stream: hot, warm and cold all use stream 1
- 2 streams: hot/warm use 1, cold uses 2
- 3+ streams: hot uses 1, warm uses 2, cold uses 3
Signed-off-by: Wenjie Qi <qwjhust@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-----BEGIN PGP SIGNATURE-----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=AbGA
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2026051401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fixes for a few OOB/UAF in several HID drivers (Florian Pradines, Lee
Jones, Michael Zaidman, Rosalie Wanders, Sangyun Kim and Tomasz
Pakuła)
- more general sanitation of input data, dealing with potentially
malicious hardware in hid-core (Benjamin Tissoires)
- a few device-specific quirks and fixups
* tag 'hid-for-linus-2026051401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits)
HID: logitech-hidpp: Add support for newer Bluetooth keyboards
HID: pidff: Fix integer overflow in pidff_rescale
HID: i2c-hid: add reset quirk for BLTP7853 touchpad
HID: core: introduce hid_safe_input_report()
HID: pass the buffer size to hid_report_raw_event
HID: google: hammer: stop hardware on devres action failure
HID: appletb-kbd: run inactivity autodim from workqueues
HID: appletb-kbd: fix UAF in inactivity-timer cleanup path
HID: playstation: Clamp num_touch_reports
HID: magicmouse: Prevent out-of-bounds (OOB) read during DOUBLE_REPORT_ID
HID: mcp2221: fix OOB write in mcp2221_raw_event()
HID: quirks: really enable the intended work around for appledisplay
HID: hid-sjoy: race between init and usage
HID: uclogic: Fix regression of input name assignment
HID: intel-thc-hid: Intel-quickspi: Fix some error codes
HID: hid-lenovo-go-s: restore OS_TYPE after resume from s2idle
HID: elan: Add support for ELAN SB974D touchpad
HID: sony: add missing size validation for Rock Band 3 Pro instruments
HID: sony: add missing size validation for SMK-Link remotes
HID: sony: remove unneeded WARN_ON() in sony_leds_init()
...
- Check ACPI_COMPANION() against NULL during probe in several core
ACPI device drivers (Rafael Wysocki)
- Restore log level of messages in amd_set_max_freq_ratio() (Mario
Limonciello)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmoGNzMSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1jnQIAKh2uRaJZs8YMsMpRfRS/RV1+90a11PH
4Q4rH1HsIqFB9GOH5fEmrN/Tde4R28QCbTphib0viQoY6izHWjL/dEj/aT7t6NLw
f/h3udRMGDsOYFMFeWIsW10w7lCh3DPWE3j0orPvUlQhj/XgU8NVXfridlsByy6D
YWehDkdWuIzIckEuUnC/ShndHc9B1FCa5wqdMvSpLW3z9eV84UEMPxYbUTJXRfIm
/lQHgDPgBIJW4Ps4cpzdiqasYmQHi2ccwJgScWWdNhS3kyZm2Il/vksKbJ9oKVwF
MuLp9C1j4T4SqmBMk1ZbvwRgAMVno6HnhUcti9Te6nDw0gtugFSCXSk=
=CyDJ
-----END PGP SIGNATURE-----
Merge tag 'acpi-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
"These fix several platform drivers that use the ACPI companion of the
given platform device without checking its presence, which may lead to
a NULL pointer dereference or other kind of malfunction if the driver
is forced to match a device without an ACPI companion via driver
override, and restore debug log level for some messages in the ACPI
CPPC library:
- Check ACPI_COMPANION() against NULL during probe in several core
ACPI device drivers (Rafael Wysocki)
- Restore log level of messages in amd_set_max_freq_ratio() (Mario
Limonciello)"
* tag 'acpi-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PAD: xen: Check ACPI_COMPANION() against NULL
ACPI: driver: Check ACPI_COMPANION() against NULL during probe
Revert "ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"
Merge a revert of an ACPI CPPC commit that increased the log level of
some debug messages which turned out to be a bad idea:
- Restore log level of messages in amd_set_max_freq_ratio() (Mario
Limonciello)
* acpi-cppc:
Revert "ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"
-----BEGIN PGP SIGNATURE-----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=bV7l
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20260513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fixes from Paul Moore:
- Correctly log the inheritable capabilities
- Honor AUDIT_LOCKED in the AUDIT_TRIM and AUDIT_MAKE_EQUIV commands
* tag 'audit-pr-20260513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: enforce AUDIT_LOCKED for AUDIT_TRIM and AUDIT_MAKE_EQUIV
audit: fix incorrect inheritable capability in CAPSET records
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override.
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At this time the driver is not listing any speeds
it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT
for DP83TC811. Add the missing call for phylib to read the abilities.
Fixes: b753a9faaf ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260512071949.6218-1-schuchmann@schleissheimer.de
[pabeni@redhat.com: dropped revision history]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sashiko points out that if end = 0 (start != 0) the current
code will create a chain link to content type right after
the wrap link:
This would create a chain where the wrap link points directly
to another chain link. The scatterlist API sg_next iterator
does not recursively resolve consecutive chain links.
meaning this is illegal input to crypto.
The wrapping link is unnecessary if end = 0. end is the entry after
the last one used so end = 0 means there's nothing pushed after
the wrap:
end start i
v v v
[ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap]
Skip the wrapping in this case.
TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0.
This avoids the chain-after-chain.
Move the wrap chaining before marking END and chaining off content
type, that feels like more logical ordering to me, but should not
matter from functional perspective.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 9aaaa56845 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260511174920.433155-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When an sk_msg scatterlist ring wraps (sg.end < sg.start),
tls_push_record() chains the tail portion of the ring to the head
using sg_chain(). An extra entry in the sg array is reserved for
this:
struct sk_msg_sg {
[...]
/* The extra two elements:
* 1) used for chaining the front and sections when the list becomes
* partitioned (e.g. end < start). The crypto APIs require the
* chaining;
* 2) to chain tailer SG entries after the message.
*/
struct scatterlist data[MAX_MSG_FRAGS + 2];
The current code uses MAX_SKB_FRAGS + 1 as the ring size:
sg_chain(&msg_pl->sg.data[msg_pl->sg.start],
MAX_SKB_FRAGS - msg_pl->sg.start + 1,
msg_pl->sg.data);
This places the chain pointer at
sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. =
&data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 =
data[start + (MAX_SKB_FRAGS - start + 1) - 1] =
data[MAX_SKB_FRAGS]
instead of the true last entry. This is likely due to a "race" of
the commit under Fixes landing close to
commit 031097d9e0 ("bpf: sk_msg, zap ingress queue on psock down")
Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested
by Sabrina).
Reported-by: 钱一铭 <yimingqian591@gmail.com>
Fixes: 9aaaa56845 ("bpf: Sockmap/tls, skmsg can have wrapped skmsg that needs extra chaining")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511174920.433155-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is
reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()
populates V2 entries starting at index 1, so when no V1 device is
selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==
NULL and ism_chid[0] == 0.
smc_v2_determine_accepted_chid() then matches the peer's CHID against
the array starting from index 0 using the CHID alone. A malicious
peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches
the empty slot, ini->ism_selected becomes 0, and the subsequent
ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at
offsetof(struct smcd_dev, lgr_lock) == 0x68:
BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0
Write of size 4 at addr 0000000000000068 by task exploit/144
Call Trace:
_raw_spin_lock_bh
smc_conn_create (net/smc/smc_core.c:1997)
__smc_connect (net/smc/af_smc.c:1447)
smc_connect (net/smc/af_smc.c:1720)
__sys_connect
__x64_sys_connect
do_syscall_64
Require ism_dev[i] to be non-NULL before accepting a CHID match.
Fixes: a7c9c5f4af ("net/smc: CLC accept / confirm V2")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260511062138.2839584-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jinliang Zheng says:
====================
macsec: use rcu_work to fix crypto cleanup in softirq context
From: Jinliang Zheng <alexjlzheng@tencent.com>
crypto_free_aead() can internally call vunmap() (e.g. via dma_free_attrs()
in hardware crypto drivers like hisi_sec2), which must not be invoked from
softirq context. Both free_rxsa() and free_txsa() are RCU callbacks that
run in softirq, causing a kernel crash on affected hardware.
This series fixes the issue by deferring the actual cleanup to a workqueue
using rcu_work, which combines the RCU grace period and workqueue dispatch
into a single primitive.
Two design decisions worth noting:
1. rcu_work instead of schedule_work() + synchronize_rcu()
An alternative would be to call schedule_work() directly from
macsec_rxsa_put()/macsec_txsa_put(), then call synchronize_rcu() at
the start of the work handler to replace the grace period previously
provided by call_rcu(). However, synchronize_rcu() blocks the worker
thread for the duration of a full RCU grace period. Under high SA
churn (e.g. tearing down an interface with many SAs), each SA would
occupy a worker thread while waiting, and multiple concurrent calls
cannot share the same grace period — leading to unnecessary latency
and resource waste.
rcu_work uses call_rcu_hurry() internally, which is fully asynchronous:
the worker thread is only dispatched after the grace period has elapsed,
and multiple concurrent queue_rcu_work() calls naturally batch under the
same grace period via the RCU subsystem's existing coalescing mechanism.
2. Dedicated workqueue instead of system_wq
Using a dedicated workqueue (macsec_wq) allows macsec_exit() to drain
exactly the work items belonging to this module — by calling
destroy_workqueue() after rcu_barrier(). If system_wq were used,
flush_scheduled_work() would drain all pending work items across the
entire system, creating unnecessary coupling with unrelated subsystems
and potentially causing unexpected delays. The dedicated workqueue
provides a clean, contained teardown path.
====================
Link: https://patch.msgid.link/20260511153102.2640368-1-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
free_txsa() is an RCU callback running in softirq context, but calls
crypto_free_aead() which can invoke vunmap() internally on hardware
crypto drivers (e.g. hisi_sec2), triggering a kernel crash.
Use rcu_work to defer the cleanup to a workqueue, for the same reasons
as the analogous fix to free_rxsa() in the previous patch.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-4-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
crypto_free_aead() can internally invoke vunmap() (e.g. via
dma_free_attrs() in hardware crypto drivers such as hisi_sec2).
vunmap() must not be called from softirq context, but free_rxsa()
is an RCU callback that runs in softirq, leading to a kernel crash:
vunmap+0x4c/0x70
__iommu_dma_free+0xd0/0x138
dma_free_attrs+0xf4/0x100
sec_aead_exit+0x64/0xb8 [hisi_sec2]
crypto_destroy_tfm+0x98/0x110
free_rxsa+0x28/0x50 [macsec]
rcu_do_batch+0x184/0x460
rcu_core+0xf4/0x1f8
handle_softirqs+0x118/0x330
Use rcu_work to defer the cleanup to a workqueue. rcu_work dispatches
the worker asynchronously after the RCU grace period, so no thread
blocks waiting, and concurrent releases of multiple SAs naturally
share the same grace period.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-3-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a dedicated ordered workqueue, macsec_wq, which will be used
by subsequent patches to defer SA crypto cleanup (crypto_free_aead and
related teardown) out of softirq context.
Using a dedicated workqueue instead of system_wq allows macsec_exit()
to drain exactly the work items belonging to this module via
destroy_workqueue(), without interfering with unrelated work items on
system_wq or causing unexpected delays elsewhere.
rcu_barrier() in macsec_exit() ensures all in-flight rcu_work callbacks
have enqueued their work items before destroy_workqueue() drains and
destroys the queue, making the two-step teardown correct and complete.
The same sequence is kept in the error path of macsec_init() as a
precaution, to mirror macsec_exit() and stay safe if work ever becomes
queueable before this point in the future.
While at it, rename the error labels in macsec_init() from the
resource-named style (rtnl:, notifier:, wq:) to the err_xxx: style
(err_rtnl:, err_notifier:, err_destroy_wq:) to align with the broader
kernel convention.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-2-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
