-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAmD9M0sTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqT6SB/9S0h403FVv8IMCX2Vs3lD1ydQag8Uu
B7Pnb2eI5lQ7sRyaCTBxQvZIwcClx1DKdRDqeyvHQ3GqMA9mhysyovhFfXt6OmaD
VyPIOBxquothlelZwMz743dXAta8WVyMHxIQkn4PJuEHoaFRLXI1TcXtlN/rPfSr
VRt/QTN8Z4xYVx34YNQcK0jxkgVkkWY0Bv0hjHO0+XIW27zeX6JeAsJZZxQAQpmx
bT4pZq9oKYSq9WTIdh8uq2HeBIbcA8wlVHV7ixdVfe0hWrBW5INfB5hsQ+THjJ51
7XhO3cVaOuQZnZEta69RSFBvZiugevZXN1AJudgle16+317LTVUZ/bTX
=/GFB
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.15-20210725' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
linux-can-next-for-5.15-20210725
Marc Kleine-Budde says:
====================
pull-request: can-next 2021-07-25
this is a pull request of 46 patches for net-next/master.
The first 6 patches target the CAN J1939 protocol. One is from
gushengxian, fixing a grammatical error, 5 are by me fixing a checkpatch
warning, make use of the fallthrough pseudo-keyword, and use
consistent variable naming.
The next 3 patches target the rx-offload helper, are by me and improve
the performance and fix the local softirq work pending error, when
napi_schedule() is called from threaded IRQ context.
The next 3 patches are by Vincent Mailhol and me update the CAN
bittiming and transmitter delay compensation, the documentation for
the struct can_tdc is fixed, clear data_bittiming if FD mode is turned
off and a redundant check is removed.
Followed by 4 patches targeting the m_can driver. Faiz Abbas's patches
add support for CAN PHY via the generic phy subsystem. Yang Yingliang
converts the driver to use devm_platform_ioremap_resource_byname().
And a patch by me which removes the unused support for custom bit
timing.
Andy Shevchenko contributes 2 patches for the mcp251xfd driver to
prepare the driver for ACPI support. A patch by me adds support for
shared IRQ handlers.
Zhen Lei contributes 3 patches to convert the esd_usb2, janz-ican3 and
the at91_can driver to make use of the DEVICE_ATTR_RO/RW() macros.
The next 8 patches are by Peng Li and provide general cleanups for the
at91_can driver.
The next 7 patches target the peak driver. Frist 2 cleanup patches by
me for the peak_pci driver, followed by Stephane Grosjean' patch to
print the name and firmware version of the detected hardware. The
peak_usb driver gets a cleanup patch, loopback and one-shot mode and
an upgrading of the bus state change handling in Stephane Grosjean's
patches.
Vincent Mailhol provides 6 cleanup patches for the etas_es58x driver.
In the last 3 patches Angelo Dureghello add support for the mcf5441x
SoC to the flexcan driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The dma_pool_zalloc combines dma_pool_alloc/memset. Therefore, the
dma_pool_alloc/memset can be replaced with dma_pool_zalloc which is
more compact.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use dynamic interrupt moderation library to implement coalesce
adaptive feature for nfp driver.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packets are aggregated over the MBIM link and currently the MHI net
device will count each aggregated packet rather then the actual
packets themselves.
If a protocol handler module is specified, use that to count the
packets rather than directly in the MHI net device. This is in line
with the behaviour of the USB net cdc_mbim driver.
Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the code by removing unnecessary label and returning directly.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guangbin Huang says:
====================
net: hns3: add support devlink
This series adds devlink support for the HNS3 ethernet driver.
change log:
V2 -> V3:
1. remove two patches of setting rx/tx buffer size by devlink param.
V1 -> V2:
1. add more detailed descriptions of parameters in document hns3.rst.
RFC -> V1:
1. use DEVLINK_INFO_VERSION_GENERIC_FW instead of "fw-version".
2. add devlink documentation for hns3 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink reload support for HNS3 ethernet VF driver.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink reload support for HNS3 ethernet PF driver.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink get info support for HNS3 ethernet VF driver.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink get info support for HNS3 ethernet PF driver.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink register support for HNS3 ethernet VF driver.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink register support for HNS3 ethernet PF driver.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a file to document devlink support for hns3 driver, now support devlink
info and devlink reload.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported an use-after-free crash:
BUG: KASAN: use-after-free in tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979
Call Trace:
tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979
sock_recvmsg_nosec net/socket.c:943 [inline]
sock_recvmsg net/socket.c:961 [inline]
sock_recvmsg+0xca/0x110 net/socket.c:957
tipc_conn_rcv_from_sock+0x162/0x2f0 net/tipc/topsrv.c:398
tipc_conn_recv_work+0xeb/0x190 net/tipc/topsrv.c:421
process_one_work+0x98d/0x1630 kernel/workqueue.c:2276
worker_thread+0x658/0x11f0 kernel/workqueue.c:2422
As Hoang pointed out, it was caused by skb_cb->bytes_read still accessed
after calling tsk_advance_rx_queue() to free the skb in tipc_recvmsg().
This patch is to fix it by accessing skb_cb->bytes_read earlier than
calling tsk_advance_rx_queue().
Fixes: f4919ff59c ("tipc: keep the skb in rcv queue until the whole data is read")
Reported-by: syzbot+e6741b97d5552f97c24d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update flexcan to support coldfire architecture.
Any new platform should use OF, but coldfire architecture is
actually not supporting devicetrees.
Link: https://lore.kernel.org/r/20210702094841.327679-4-angelo@kernel-space.org
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add flexcan support for NXP ColdFire mcf5441x family.
This flexcan module is quite similar to imx6 flexcan module, but
with some exceptions:
- 3 separate interrupt sources, MB, BOFF and ERR,
- implements 16 mb only,
- m68k architecture is not supporting devicetrees, so a
platform data check/case has been added,
- ColdFire is m68k, so big-endian cpu, with a little-endian flexcan
module.
Link: https://lore.kernel.org/r/20210702094841.327679-5-angelo@kernel-space.org
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The es581_tx_can_msg() does below cast:
| tx_can_msg = (struct es581_4_tx_can_msg *)
| &es581_4_urb_cmd->bulk_tx_can_msg.tx_can_msg_buf[msg_len - 1];
The -1 offset is to skip the first member of struct
es581_4_tx_can_msg. However, es581_4_urb_cmd already has a raw_msg
field which can be used instead without the use of an offset
calculation.
The function es58x_fd_tx_can_msg() is also modified to mirror
es581_tx_can_msg().
Link: https://lore.kernel.org/r/20210628155420.1176217-7-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Replace two constant values by a call to sizeof{,_field} on the
relevant field to make the logic easier to understand.
Link: https://lore.kernel.org/r/20210628155420.1176217-6-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Both es58x_probe() and es58x_disconnect() use a similar code snippet
to release the netdev resources. Factorize it in an helper function
named es58x_free_netdevs().
Link: https://lore.kernel.org/r/20210628155420.1176217-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Replace kzalloc() with devm_kzalloc(). By doing this, we do not need
to care anymore about having to call kfree(). This result in a
simpler and more easy to read code.
Link: https://lore.kernel.org/r/20210628155420.1176217-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Make es58x_init_es58x_dev return a pointer to the allocated structure
instead of returning an integer. Errors are handled through the helper
function ERR_PTR and IS_ERR.
This slightly simplifies the code.
Link: https://lore.kernel.org/r/20210628155420.1176217-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Change the author name from "lastname firstname" to "firstname
lastname".
Fix a typo in a variable name in the documentation of struct
es58x_parameters::fifo_mask.
Fix a typo in the title of the datasheet (E701 -> E70) and re-indent
the comments.
Link: https://lore.kernel.org/r/20210628155420.1176217-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch updates old code by using the can_change_state() function
published since by the socket-can module.
In particular, this new code better manages the change of bus state by
also using the value of the error counters that the driver now
systematically asks for when initializing the channel.
Link: https://lore.kernel.org/r/20210715142842.35793-1-s.grosjean@peak-system.com
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The CAN - USB PCAN-USB interface is able to generate one-shot frames
as well as loopback frames that it transmits starting from version 4.1
of its firmware.
This patch adds support for the one-shot and loopback functionality to
the driver, that can be activated if the embedded firmware allows it.
If the driver detects that the PCAN-USB device runs an old firmware
(< 4.1) it prints a message suggesting to contact
<support@peak-system.com> for a possible firmware update.
Link: https://lore.kernel.org/r/20210625130931.27438-3-s.grosjean@peak-system.com
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds name and (possibly) firmware version information to
the kernel about the detected PEAK-System CAN - PCI/PCIe interface
card.
Link: https://lore.kernel.org/r/20210607151720.13571-1-s.grosjean@peak-system.com
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
[mkl: reformated struct pci_device_id peak_pci_tbl]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Networking block comments don't use an empty /* line,
use /* Comment...
Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.
This patch fixes the comments style issues.
Link: https://lore.kernel.org/r/1624096589-13452-9-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch uses the BIT macro for setting individual bits,
to fix the following checkpatch.pl issue:
CHECK: Prefer using the BIT macro.
Link: https://lore.kernel.org/r/1624096589-13452-5-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use DEVICE_ATTR_RW() helper macro instead of plain DEVICE_ATTR(), which
makes the code a bit shorter and easier to read.
Link: https://lore.kernel.org/r/20210603100233.11877-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use DEVICE_ATTR_RO/RW() helper macro instead of plain DEVICE_ATTR(), which
makes the code a bit shorter and easier to read.
Link: https://lore.kernel.org/r/20210603111739.11983-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use DEVICE_ATTR_RO() helper macro instead of plain DEVICE_ATTR(), which
makes the code a bit shorter and easier to read.
Link: https://lore.kernel.org/r/20210603110902.11930-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In some configurations, mainly ACPI-based, the clock frequency of the
device is supplied by very well established 'clock-frequency'
property. Hence, try to get it from the property at last if no other
providers are available.
Link: https://lore.kernel.org/r/20210531084444.1785397-1-mkl@pengutronix.de
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since commit aee2b3ccc8 ("can: tcan4x5x: fix bittiming const, use
common bittiming from m_can driver") there is no use of the device
specific bit timing parameters (m_can_classdev::bit_timing and struct
m_can_classdev::data_timing).
This patch removes the support for custom bit timing from the driver,
as the common bit timing works for all known IP core implementations.
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Link: https://lore.kernel.org/r/20210616102811.2449426-7-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Link: https://lore.kernel.org/r/20210603073441.2983497-1-yangyingliang@huawei.com
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for implementing transceiver node as phy. The max_bitrate
is obtained by getting a phy attribute.
Link: https://lore.kernel.org/r/20210724174001.553047-1-mkl@pengutronix.de
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Some transceivers need a configuration step (for example, pulling the
standby or enable lines) for them to start sending messages. The
transceiver can be implemented as a phy with the configuration done in
the phy driver. The bit rate limitation can the be obtained by the
driver using the phy node.
Document the above implementation in the bosch mcan bindings.
Link: https://lore.kernel.org/r/20210510052541.14168-2-a-govindraju@ti.com
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can_validate() does a first check:
| if (is_can_fd) {
| if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING])
| return -EOPNOTSUPP;
| }
If that first if succeeds, we know that if is_can_fd is true then
data[IFLA_CAN_BITTIMING is set.
However, the next if switch does not leverage on above knowledge and
redoes the check:
| if (data[IFLA_CAN_DATA_BITTIMING]) {
| if (!is_can_fd || !data[IFLA_CAN_BITTIMING])
| ^~~~~~~~~~~~~~~~~~~~~~~~
| return -EOPNOTSUPP;
| }
This patch removes that redundant check.
Link: https://lore.kernel.org/r/20210603151550.140727-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When the FD is turned off through the netlink interface, the data bit
timing values still remain in data_bittiming and are displayed despite
of the feature being disabled.
Example:
| $ ip link set can0 type can bitrate 500000 dbitrate 2000000 fd on
| $ ip --details link show can0
| 1: can0: <NOARP,ECHO> mtu 72 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10
| link/can promiscuity 0 minmtu 0 maxmtu 0
| can <FD> state STOPPED restart-ms 0
| bitrate 500000 sample-point 0.875
| tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1
| ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1
| dbitrate 2000000 dsample-point 0.750
| dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1
| ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1
| clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
|
| $ ip link set can0 type can bitrate 500000 fd off
| $ ip --details link show can0
| 1: can0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10
| link/can promiscuity 0 minmtu 0 maxmtu 0
| can state STOPPED restart-ms 0
| bitrate 500000 sample-point 0.875
| tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1
| ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1
| dbitrate 2000000 dsample-point 0.750
| dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1
| ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1
| clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Remark: once FD is turned off, it is not possible to turn fd back on
and reuse the previously input data bit timing values:
| $ ip link set can0 type can bitrate 500000 fd on
| RTNETLINK answers: Operation not supported
This means that the user will need to re-configure the data bit timing
in order to turn fd on again.
Because old data bit timing values cannot be reused, this patch clears
priv->data_bit timing whenever FD is turned off. This way, the data
bit timing variables are not displayed anymore.
Link: https://lore.kernel.org/r/20210618081904.141114-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
