[ Upstream commit 3398183808 ]
The sanitize operation is destructive and the expectation is that the
device is unmapped while in progress. The current implementation does a
lockless check for decoders being active, but then does nothing to
prevent decoders from racing to be committed. Introduce state tracking
to resolve this race.
This incidentally cleans up unpriveleged userspace from triggering mmio
read cycles by spinning on reading the 'security/state' attribute. Which
at a minimum is a waste since the kernel state machine can cache the
completion result.
Lastly cxl_mem_sanitize() was mistakenly marked EXPORT_SYMBOL() in the
original implementation, but an export was never required.
Fixes: 0c36b6ad43 ("cxl/mbox: Add sanitization handling machinery")
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f2da19714 ]
Fix a race condition between the mailbox-background command interrupt
firing and the security-state sysfs attribute being removed.
The race is difficult to see due to the awkward placement of the
sanitize-notifier setup code and the multiple places the teardown calls
are made, cxl_memdev_security_init() and cxl_memdev_security_shutdown().
Unify setup in one place, cxl_sanitize_setup_notifier(). Arrange for
the paired cxl_sanitize_teardown_notifier() to safely quiet the notifier
and let the cxl_memdev + irq be unregistered later in the flow.
Note: The special wrinkle of the sanitize notifier is that it interacts
with interrupts, which are enabled early in the flow, and it interacts
with memdev sysfs which is not initialized until late in the flow. Hence
why this setup routine takes an @cxlmd argument, and not just @mds.
This fix is also needed as a preparation fix for a memdev unregistration
crash.
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20230929100316.00004546@Huawei.com
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Fixes: 0c36b6ad43 ("cxl/mbox: Add sanitization handling machinery")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f29a824b0b ]
It is all too easy to get confused about @dev usage in the CXL driver
stack. Before adding a new cxl_pci_probe() setup operation that has a
devm lifetime dependent on @cxlds->dev binding, but also references
@cxlmd->dev, and prints messages, rework the devm_cxl_add_memdev() and
cxl_memdev_setup_fw_upload() function signatures to make this
distinction explicit. I.e. pass in the devm context as an @host argument
rather than infer it from other objects.
This is in preparation for adding a devm_cxl_sanitize_setup_notifier().
Note the whitespace fixup near the change of the devm_cxl_add_memdev()
signature. That uncaught typo originated in the patch that added
cxl_memdev_security_init().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da19714 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2627c995c1 ]
If dev_err_probe() is to be used it should at least be used consistently
within the same function. It is also worth questioning whether
every potential -ENOMEM needs an explicit error message.
Remove the cxl_setup_fw_upload() error prints for what are rare /
hardware-independent failures.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da19714 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e30a106558 ]
In preparation for fixing the init/teardown of the 'sanitize' workqueue
and sysfs notification mechanism, arrange for cxl_mbox_sanitize_work()
to be the single location where the sysfs attribute is notified. With
that change there is no distinction between polled mode and interrupt
mode. All the interrupt does is accelerate the polling interval.
The change to check for "mds->security.sanitize_node" under the lock is
there to ensure that the interrupt, the work routine and the
setup/teardown code can all have a consistent view of the registered
notifier and the workqueue state. I.e. the expectation is that the
interrupt is live past the point that the sanitize sysfs attribute is
published, and it may race teardown, so it must be consulted under a
lock. Given that new locking requirement, cxl_pci_mbox_irq() is moved
from hard to thread irq context.
Lastly, some opportunistic replacements of
"queue_delayed_work(system_wq, ...)", which is just open coded
schedule_delayed_work(), are included.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da19714 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76fe8713dd ]
Given that any particular put_device() could be the final put of the
device, the fact that there are usages of cxlds->dev after
put_device(cxlds->dev) is a red flag. Drop the reference counting since
the device is pinned by being registered and will not be unregistered
without triggering the driver + workqueue to shutdown.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5f2da19714 ("cxl/pci: Fix sanitize notifier setup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e005a9b35b ]
Some devices (e.g. BCM72112) use an alarm_irq interrupt that is
connected to a level interrupt controller rather than an edge
interrupt controller. In this case, the interrupt cannot be left
enabled by the irq handler while preserving the hardware wake-up
signal on wake capable devices or an interrupt storm will occur.
The alarm_expired flag is introduced to allow the disabling of
the interrupt when an alarm expires and to support balancing the
calls to disable_irq() and enable_irq() in accordance with the
existing design.
Fixes: 24304a8715 ("rtc: brcmstb-waketimer: allow use as non-wake alarm")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230830224747.1663044-1-opendmb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cab63f6488 ]
put_device() needs to be called on failure of device_register()
to give up the reference initialized in it to avoid refcount leak.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20230921082410.25548-1-dinghao.liu@zju.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 696444a544 ]
Variable found is not being initialized, in the case where the desired
mount is not found the variable contains garbage. Fix this by initializing
it to zero.
Link: https://lore.kernel.org/all/20230727150117.627730-1-colin.i.king@gmail.com/
Fixes: a957cbc025 ("rtla: Add -C cgroup support")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce07087964 ]
When p9pdu_readf() is called with "s?d" attribute, it allocates a pointer
that will store a string. But when p9pdu_readf() fails while handling "d"
then this pointer will not be freed in p9_check_errors().
Fixes: 51a87c552d ("9p: rework client code to use new protocol support functions")
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Message-ID: <20231027030302.11927-1-hbh25y@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3779416eed ]
Broadwell-de has a consumer core and server uncore. The uncore_arb PMU
isn't present and the broadwellx style cbox PMU should be used
instead. Fix the tma_info_system_dram_bw_use metric to use the server
metric rather than client.
The associated converter script fix is in:
https://github.com/intel/perfmon/pull/111
Fixes: 7d124303d6 ("perf vendor events intel: Update broadwell variant events/metrics")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Perry Taylor <perry.taylor@intel.com>
Link: https://lore.kernel.org/r/20230926031034.1201145-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1149037f6 ]
Caught using reference count checking on perf top with
"--call-graph=lbr". After this no memory leaks were detected.
Fixes: 57849998e2 ("perf report: Add processing for cycle histograms")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75265320d2 ]
Make the implicit REFCOUNT_CHECKING robust to when building with GCC.
Fixes: 9be6ab181b ("libperf rc_check: Enable implicitly with sanitizers")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab8ce15078 ]
Running perf top with address sanitizer and "--call-graph=lbr" fails
due to reading sample 0 when no samples exist. Add a guard to prevent
this.
Fixes: e2b23483eb ("perf machine: Factor out lbr_callchain_add_lbr_ip()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: liuwenyu <liuwenyu7@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20231024222353.3024098-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36e826b568 ]
Since below commit, address mapping for vmemmap has changed for Radix
MMU, where address mapping is stored in kernel page table itself,
instead of earlier used 'vmemmap_list'.
commit 368a0590d9 ("powerpc/book3s64/vmemmap: switch radix to use
a different vmemmap handling function")
Hence with upstream kernel, in case of Radix MMU, makedumpfile fails
to do address translation for vmemmap addresses, as it depended on
vmemmap_list, which can now be empty.
While fixing the address translation in makedumpfile, it was identified
that currently makedumpfile cannot distinguish between Hash MMU and
Radix MMU, unless VMLINUX is passed with -x flag to makedumpfile. And
hence fails to assign offsets and shifts correctly (such as in L4 to
PGDIR offset calculation in makedumpfile).
For getting the MMU, makedumpfile uses `cur_cpu_spec.mmu_features`.
Add `cur_cpu_spec` symbol and offset of `mmu_features` in the `cpu_spec`
struct, to VMCOREINFO, so that makedumpfile can assign the offsets
correctly, without needing a VMLINUX.
Also, even along with `cur_cpu_spec->mmu_features` makedumpfile has to
depend on the 'MMU_FTR_TYPE_RADIX' flag in mmu_features, implying kernel
developers need to be cautious of changes to 'MMU_FTR_*' defines.
A more stable approach was suggested in the below thread by contributors:
https://lore.kernel.org/linuxppc-dev/20230920105706.853626-1-adityag@linux.ibm.com/
The suggestion was to add whether 'RADIX_MMU' is enabled in vmcoreinfo
This patch also implements the suggestion, by adding 'RADIX_MMU' in
vmcoreinfo, which makedumpfile can use to get whether the crashed system
had RADIX MMU (in which case 'NUMBER(RADIX_MMU)=1') or not (in which
case 'NUMBER(RADIX_MMU)=0')
Fixes: 368a0590d9 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function")
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231023072612.50874-1-adityag@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5f928db59 ]
If this driver enables the xHC clocks while resuming from sleep, it calls
clk_prepare_enable() without checking for errors and blithely goes on to
read/write the xHC's registers -- which, with the xHC not being clocked,
at least on ARM32 usually causes an imprecise external abort exceptions
which cause kernel oops. Currently, the chips for which the driver does
the clock dance on suspend/resume seem to be the Broadcom STB SoCs, based
on ARM32 CPUs, as it seems...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 8bd954c561 ("usb: host: xhci-plat: suspend and resume clocks")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-19-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4baf121815 ]
The AMD USB host controller (1022:43f7) isn't going into PCI D3 by default
without anything connected. This is because the policy that was introduced
by commit a611bf473d ("xhci-pci: Set runtime PM as default policy on all
xHC 1.2 or later devices") only covered 1.2 or later.
The 1.1 specification also has the same requirement as the 1.2
specification for D3 support. So expand the runtime PM as default policy
to all AMD 1.1 devices as well.
Fixes: a611bf473d ("xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices")
Link: https://composter.com.ua/documents/xHCI_Specification_for_USB.pdf
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20231019102924.2797346-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8b6e5b11 ]
The CPI_STALL_RATIO metric group can be used to present the high
level CPI stall breakdown metrics in powerpc, which will show:
- DISPATCH_STALL_CPI ( Dispatch stall cycles per insn )
- ISSUE_STALL_CPI ( Issue stall cycles per insn )
- EXECUTION_STALL_CPI ( Execution stall cycles per insn )
- COMPLETION_STALL_CPI ( Completion stall cycles per insn )
Commit cf26e043c2 ("perf vendor events power10: Add JSON
metric events to present CPI stall cycles in powerpc)" which added
the CPI_STALL_RATIO metric group, also modified
the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5,
to avoid multiplexing of events.
But that got revert in recent changes. Fix this issue by changing
back the PMC value used in PM_RUN_INST_CMPL to PMC5.
Result with the fix:
./perf stat --metric-no-group -M CPI_STALL_RATIO <workload>
Performance counter stats for 'workload':
68,745,426 PM_CMPL_STALL # 0.21 COMPLETION_STALL_CPI
7,692,827 PM_ISSUE_STALL # 0.02 ISSUE_STALL_CPI
322,638,223 PM_RUN_INST_CMPL # 0.05 DISPATCH_STALL_CPI
# 0.48 EXECUTION_STALL_CPI
16,858,553 PM_DISP_STALL_CYC
153,880,133 PM_EXEC_STALL
0.089774592 seconds time elapsed
"--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled
in all group for more accuracy.
Fixes: 7d473f475b ("perf vendor events: Move JSON/events to appropriate files for power10 platform")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Cc: maddy@linux.ibm.com
Link: https://lore.kernel.org/r/20231016143110.244255-1-kjain@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95f1a128cd ]
If the vcpu_associativity alloc memory successfully but the
pcpu_associativity fails to alloc memory, the vcpu_associativity
memory leaks.
Fixes: d62c8deeb6 ("powerpc/pseries: Provide vcpu dispatch statistics")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1671003983-10794-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 007240d59c ]
The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users
that desire to initialize a spinlock in a struct must use
__SPIN_LOCK_UNLOCKED().
Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc.
Fixes: 76d588dddc ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73b25505ce ]
The VAS open window call prints error message and returns -EBUSY
after the migration suspend event initiated and until the resume
event completed on the destination system. It can cause the log
buffer filled with these error messages if the user space issues
continuous open window calls. Similar case even for DLPAR CPU
remove event when no credits are available until the credits are
freed or with the other DLPAR CPU add event.
So changes in the patch to use pr_err_ratelimited() instead of
pr_err() to display open window failure and not-available credits
error messages.
Use pr_fmt() and make the corresponding changes to have the
consistencein prefix all pr_*() messages (vas-api.c).
Fixes: 37e6764895 ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
[mpe: Use "vas-api" as the prefix to match the file name.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231019215033.1335251-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d45c4b48da ]
A thread started via eg. user_mode_thread() runs in the kernel to begin
with and then may later return to userspace. While it's running in the
kernel it has a pt_regs at the base of its kernel stack, but that
pt_regs is all zeroes.
If the thread oopses in that state, it leads to an ugly stack trace with
a big block of zero GPRs, as reported by Joel:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc7-00004-gf7757129e3de-dirty #3
Hardware name: IBM PowerNV (emulated by qemu) POWER9 0x4e1200 opal:v7.0 PowerNV
Call Trace:
[c0000000036afb00] [c0000000010dd058] dump_stack_lvl+0x6c/0x9c (unreliable)
[c0000000036afb30] [c00000000013c524] panic+0x178/0x424
[c0000000036afbd0] [c000000002005100] mount_root_generic+0x250/0x324
[c0000000036afca0] [c0000000020057d0] prepare_namespace+0x2d4/0x344
[c0000000036afd20] [c0000000020049c0] kernel_init_freeable+0x358/0x3ac
[c0000000036afdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c0000000036afe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
NIP: 0000000000000000 LR: 0000000000000000 CTR: 0000000000000000
REGS: c0000000036afe80 TRAP: 0000 Not tainted (6.5.0-rc7-00004-gf7757129e3de-dirty)
MSR: 0000000000000000 <> CR: 00000000 XER: 00000000
CFAR: 0000000000000000 IRQMASK: 0
GPR00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
NIP [0000000000000000] 0x0
LR [0000000000000000] 0x0
--- interrupt: 0
The all-zero pt_regs looks ugly and conveys no useful information, other
than its presence. So detect that case and just show the presence of the
frame by printing the interrupt marker, eg:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00126-g18e9506562a0-dirty #301
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
Call Trace:
[c000000003aabb00] [c000000001143db8] dump_stack_lvl+0x6c/0x9c (unreliable)
[c000000003aabb30] [c00000000014c624] panic+0x178/0x424
[c000000003aabbd0] [c0000000020050fc] mount_root_generic+0x250/0x324
[c000000003aabca0] [c0000000020057cc] prepare_namespace+0x2d4/0x344
[c000000003aabd20] [c0000000020049bc] kernel_init_freeable+0x358/0x3ac
[c000000003aabdf0] [c0000000000111b0] kernel_init+0x30/0x1a0
[c000000003aabe50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
--- interrupt: 0 at 0x0
To avoid ever suppressing a valid pt_regs make sure the pt_regs has a
zero MSR and TRAP value, and is located at the very base of the stack.
Fixes: 6895dfc047 ("powerpc: copy_thread fill in interrupt frame marker and back chain")
Reported-by: Joel Stanley <joel@jms.id.au>
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230824064210.907266-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff7a60ab1e ]
Sparse reports a size mismatch in the endian swap. The Opal
implementation[1] passes the value as a __be64, and the receiving
variable out_qsize is a u64, so the use of be32_to_cpu() appears to be
an error.
[1]: https://github.com/open-power/skiboot/blob/80e2b1dc73/hw/xive.c#L3854
Fixes: 88ec6b93c8 ("powerpc/xive: add OPAL extensions for the XIVE native exploitation support")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-2-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc8ee288f4 ]
40x TLB handlers were reworked by commit 2c74e2586b ("powerpc/40x:
Rework 40x PTE access and TLB miss") to not require PTE_ATOMIC_UPDATES
anymore.
Then commit 4e1df545e2 ("powerpc/pgtable: Drop PTE_ATOMIC_UPDATES")
removed all code related to PTE_ATOMIC_UPDATES.
Remove left over PTE_ATOMIC_UPDATES macro.
Fixes: 2c74e2586b ("powerpc/40x: Rework 40x PTE access and TLB miss")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/f061db5857fcd748f84a6707aad01754686ce97e.1695659959.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f36b190ad ]
The recent change made it possible to generate vmlinux.h from BTF and
to ignore the file. But we also have a minimal vmlinux.h that will be
used by default. It should not be ignored by GIT.
Fixes: b7a2d774c9 ("perf build: Add ability to build with a generated vmlinux.h")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310110451.rvdUZJEY-lkp@intel.com/
Cc: oe-kbuild-all@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac96a15a0f ]
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{6A19CC4B-D760-4DE3-B14D-F25EBD0FBCD9}");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/platform/x86/intel/ishtp_eclite.mod.c
MODULE_ALIAS("ishtp:{BD0FBCD9-F25E-B14D-4DE3-D7606A19CC4B}");
This issue has been unnoticed because the x86 kernel is most likely built
natively on an x86 host.
The guid field must not be reversed because guid_t is an array of __u8.
Fixes: fa443bc3c1 ("HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f54e00e58 ]
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:ab7a617c-b8e7-4d8f-8301-d09b61036b64*");
However, if you build it on a big-endian host, you will get a wrong
MODULE_ALIAS:
$ grep MODULE_ALIAS drivers/char/hw_random/optee-rng.mod.c
MODULE_ALIAS("tee:646b0361-9bd0-0183-8f4d-e7b87c617aab*");
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d10 ("tee: add bus driver framework for TEE based devices")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32d1d9204f ]
On a state toggle from config off to config on and on the
state toggle from checkstop to not checkstop the queue's
internal states was set but the state machine was not
nudged. This did not care as on the first enqueue of a
request the state machine kick ran.
However, within an Secure Execution guest a queue is
only chosen by the scheduler when it has been bound.
But to bind a queue, it needs to run through the initial
states (reset, enable interrupts, ...). So this is like
a chicken-and-egg problem and the result was in fact
that a queue was unusable after a config off/on toggle.
With some slight rework of the handling of these states
now the new function _ap_queue_init_state() is called
which is the core of the ap_queue_init_state() function
but without locking handling. This has the benefit that
it can be called on all the places where a (re-)init
of the AP queue's state machine is needed.
Fixes: 2d72eaf036 ("s390/ap: implement SE AP bind, unbind and associate")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85f73c377b ]
pmu should be initialized to NULL before perf_pmus__scan loop. Fix and
shrink the scope of pmu at the same time. Issue detected by clang-tidy.
Fixes: 5752c20f37 ("perf mem: Scan all PMUs instead of just core ones")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-10-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20576fd7f ]
Raw events can be strings like 'r0xead' but the 0x is optional so they
can also be 'read'. On IcelakeX uncore_imc_free_running has an event
called 'read' which may be programmed as:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
```
However, the PE_RAW type isn't allowed on the right of a term, even
though in this case we just want to interpret it as a string. This
leads to the following error on IcelakeX:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Fix this by allowing raw types on the right of terms and treat them as
strings, just as is already done for PE_LEGACY_CACHE. Make this
consistent by just entirely removing name_or_legacy and always using
name_or_raw that covers all three cases.
Fixes: 6fd1e51915 ("perf parse-events: Support PMUs for legacy cache events")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230928004431.1926969-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1783ddfb6 ]
By default perf will fail the build if the development files for
libtraceevent are not available.
To build perf without libtraceevent support, disabling several features
such as 'perf trace', one needs to add NO_LIBTRACEVENT=1 to the make
command line.
Add the missing comments about that to the tools/perf/Makefile.perf
file, just like all the other such command line toggles.
Fixes: 378ef0f5d9 ("perf build: Use libtraceevent from the system")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZR6+MhXtLnv6ow6E@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 273f74a2e7 ]
Add missing clk_disable_unprepare() and clk_bulk_disable_unprepare()
in the error path in qnoc_probe(). And when qcom_icc_qos_set() fails,
it needs remove nodes and disable clks.
Fixes: 2e2113c8a6 ("interconnect: qcom: rpm: Handle interface clocks")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230803130521.959487-1-yangyingliang@huawei.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7e0d9bb91 ]
Clang 17 reports:
arch/powerpc/kernel/traps.c:1167:19: error: unused function '__parse_fpscr' [-Werror,-Wunused-function]
__parse_fpscr() is called from two sites. First call is guarded
by #ifdef CONFIG_PPC_FPU_REGS
Second call is guarded by CONFIG_MATH_EMULATION which selects
CONFIG_PPC_FPU_REGS.
So only define __parse_fpscr() when CONFIG_PPC_FPU_REGS is defined.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309210327.WkqSd5Bq-lkp@intel.com/
Fixes: b6254ced4d ("powerpc/signal: Don't manage floating point regs when no FPU")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/5de2998c57f3983563b27b39228ea9a7229d4110.1695385984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df1b8356a8 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: d26a566744 ("interconnect: qcom: Add SM8350 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-11-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9434c68961 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 6df5b34949 ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-10-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ed4217640 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: a09b817c8b ("interconnect: qcom: Add SM8150 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-9-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe7a3abf41 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 6a6eff73a9 ("interconnect: qcom: Add SM6350 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-8-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8fe97a9fd ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: b5d2f74107 ("interconnect: qcom: Add sdm845 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-7-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b85ea8b93 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 7e438e1887 ("interconnect: qcom: add sdm670 interconnects")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-6-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 688ffb3dcf ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: f29dabda79 ("interconnect: qcom: Add SC8280XP interconnect provider")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-5-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fcaaed3ff ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 9c8c6bac1a ("interconnect: qcom: Add SC8180x providers")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-4-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 437b8e7fcd ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 46bdcac533 ("interconnect: qcom: Add SC7280 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-3-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ad83c4792 ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 2d1f95ab9f ("interconnect: qcom: Add SC7180 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-2-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8517824f0e ]
ACV expects an enable_mask corresponding to the APPS RSC, fill it in.
Fixes: 1f51339f7d ("interconnect: qcom: Add QDU1000/QRU1000 interconnect driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811-topic-acv-v2-1-765ad70e539a@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83c761f568 ]
If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().
Remove this erroneous BUG_ON().
It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')
Fixes: a57e16cf03 ("dmaengine: pxa: add pxa dmaengine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c8fc5563c9593c914fde41f0f7d1489a21b45a9a.1696676782.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9747576348 ]
If a hub is disconnected that has device(s) that's attached to the usbip layer
the disconnect function might fail because it tries to release the port
on an already disconnected hub.
Fixes: 6080cd0e92 ("staging: usbip: claim ports used by shared devices")
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230615092810.1215490-1-jonas.blixt@actia.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
