Convert tx_qp from a single contiguous array allocation to per-queue
individual allocations. Each mana_tx_qp struct is approximately 35KB.
With many queues (e.g., 32/64), the flat array requires a single
contiguous allocation that can fail under memory fragmentation.
Change mana_tx_qp *tx_qp to mana_tx_qp **tx_qp (array of pointers),
allocating each queue's mana_tx_qp individually via kvzalloc. This
reduces each allocation to ~35KB and provides vmalloc fallback,
avoiding allocation failure due to fragmentation.
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260502074552.23857-2-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allison Henderson says:
====================
selftests: rds: Log collection, TAP compliance and cleanups
This series is a set of bug fixes and improvements for the rds
selftests.
Patch 1 bumps the kselftest timeout from 400s to 800s. The original
limit was developed against a lean config, but the kselftest harness
counts boot time and gcov log collection against the limit, so a
default config with gcov enabled needs more headroom.
Patch 2 corrects some typos in the run.sh USAGE string and removes an
unused "-g" flag.
Patch 3 silences a handful of pylint warnings in test.py: it adds a
module docstring, suppresses the warnings tied to the sys.path.append
import trick, marks the long lived tcpdump Popen with disable-next
consider-using-with, and drops unused exception variables from two
BlockingIOError except clauses.
Patch 4 adds a -t flag to run.sh so the timeout can be overridden
if needed.
Patch 5 adds a RDS_LOG_DIR environment variable that specifies where
logs should be stored, or skips log collection if left unset
Patch 6 adds a SUDO_USER environment variable that sets the user
for tcpdump --relinquish-privileges. This avoid the permissions
drop that would leave pcaps empty on 9pfs since 9p does not
support chown
Patch 7 removes the initial tmp tcpdumps and instead saves the pcaps
directly to the logdir if it is set.
Patch 8 hoists the tcpdump shutdown into a helper and calls it from the
timeout signal handler so that the processes are properly terminated
and dumps are flushed
Patch 9 fixes gcov collection by ensuring debugfs is mounted, and
specifying the --root folder so that gcov can still find the kernel
source when it is run from the ksft test directory.
Patch 10 makes the test output TAP compliant so the kselftest runner
parses results correctly.
====================
Link: https://patch.msgid.link/20260504054143.4027538-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch updates the rds selftests output to be TAP compliant.
Use ksft_pr() to mark debug output with a leading '# ' so that TAP
parsers treat it as commentary, and convert all informational print()
calls to use ksft_pr(). sys.exit(0) is changed to os._exit(0) to
avoid duplicate prints from the buffered TAP output. The console
output from the tcpdump subprocess is silenced, and the gcov console
output is redirected to a gcovr.log.
Finally adjust the exit path so that the hash check loop sets a
return code instead exiting directly. Then print the TAP results
and totals lines before exiting.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-11-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
debugfs is not mounted automatically in a virtme-ng guest, so the
gcov data copy from /sys/kernel/debug/gcov/ silently finds nothing
depending on whether debugfs is mounted by default on the host OS.
Fix this by mounting debugfs in run.sh before copying the gcda
files.
Finally when invoked through the kselftest runner, the working
directory is the test directory rather than the kernel source root.
gcovr defaults --root to the current working directory, which causes
it to filter out all coverage data for files under net/rds/ since
they are not under the test directory. Fix this by passing --root
to gcovr explicitly.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-10-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The timeout signal handler for the rds selftests currently just
exits when the time limit is exceeded, and forgets to stop the
network dumps. Fix this by hoisting the tcpdump terminate commands
into a helper function, and call it from the signal handler before
exiting
Bound proc.wait() with a timeout (and fall back to proc.kill())
so an unresponsive tcpdump cannot hang the timeout path itself.
We also pop() tcpdump_procs as we iterate, so stop_pcaps() is safe
to call from both the normal cleanup path and the signal handler,
since the second invocation simply has nothing to do
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-9-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch removes the initial tmp tcpdumps and instead saves
the pcaps directly to the logdir if it is set.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-8-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch modifies rds selftests to use the environment variable
SUDO_USER for tcpdumps if it is set. This is needed to avoid chown
operations on the vng 9pfs which is not supported. Passing a user
listed in sudoers avoids the tcpdump privilege drop which may
otherwise create empty pcaps
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch modifies the rds selftest to look for an env variable
RDS_LOG_DIR, and log all traces, pcaps and gcov collections to
the folder specified in RDS_LOG_DIR. If RDS_LOG_DIR is unset,
logs are not collected.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-6-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a -t flag to run.sh to optionally override the default
timeout. The --timeout flag is already supported in test.py,
so just add the shorthand -t flag
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-5-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a few pylint errors in test.py. Remove unused exception
variables from except blocks, and disable warnings for imports that cannot
appear at the start of the module. Also disable warnings for the
tcpdump processes. The suggestion to use a with block does not apply
here since the process needs to outlive the parent to collect the dumps.
Lastly add the module docstring at the top of the module.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The run.sh script does not have a -g flag. Update USAGE string with
correct flags. Also fix typo packet_duplcate -> packet_duplicate
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 400s time out was originally developed under a leaner
kernel config that booted much faster than a default config.
Boot up is included as part of the over all test runtime, as
well as any log collection done when the test is complete.
A slower config combined with the gcov enabled test means
we'll need more time to accommodate the boot up and log
collection. So, bump time out to 800s.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260504054143.4027538-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 23e8b470c7 ("net: dsa: mv88e6xxx: Add devlink param for ATU
hash algorithm.") introduced ATU hash algorithm access via devlink, but
did not enable it for the 6320 family. Do it now.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-6-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 9e907d739c ("net: dsa: mv88e6xxx: add POT operation") did not
add the .pot_clear() method to the 6321 switch operations structure.
Add them now.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-4-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 6320 family supports the ALT_SPEED bit on ports 2, 5 and 6. Allow
this speed by implementing 6320 family specific .port_set_speed_duplex()
method.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-3-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn says:
====================
selftests: drv-net: convert so_txtime to drv-net
In preparation for extending to pacing hardware offload, convert the
so_txtime.sh test to a drv-net test that can be run against netdevsim
and real hardware.
Two preparatory patches
1. support negative tests, where tests are expected to fail
2. add a tc helper
See individual patches for details and detailed changelog
====================
Link: https://patch.msgid.link/20260504174056.565319-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for extending to pacing hardware offload, convert the
so_txtime.sh test to a drv-net test that can be run against netdevsim
and real hardware.
Also update so_txtime.c to not exit on first failure, but run to
completion and report exit code there. This helps with debugging
unexpected results, especially when processing multiple packets,
as happens in the "reverse_order" testcase.
Signed-off-by: Willem de Bruijn <willemb@google.com>
----
v6 -> v7
- update test to use new argument expect_fail
- v6 received Reviewed-by, but dropped due to above (minor) change
v5 -> v6
- fix order in tools/testing/selftests/drivers/net/config
v4 -> v5
- move qdisc setup/restore into each test
- add tc to utils.py (separate patch)
- test expected failure (separate patch)
- fix pylint
- convert fail to pass for timing errors if KSFT_MACHINE_SLOW
(cmd does not special case KSFT_SKIP process returncode yet)
Responses to sashiko review
- The test converts per packet failure to errors, to continue
testing other packets, but other error() cases are not in scope.
- The test starts sender and receiver at an absolute future time,
like the original test. This assumes ~msec scale sync'ed clocks.
- The tc qdisc replace command works fine with noqueue. Tested
manually.
v3 -> v4
- restore original qdisc after test
- drop unnecessary underscore in tap test names
v2 -> v3
- Makefile: so_txtime from YNL_GEN_FILES to TEST_GEN_FILES (Sashiko, NIPA)
v1 -> v2
- move so_txtime.c for net/lib to drivers/net (Jakub)
- fix drivers/net/config order (Jakub)
- detect passing when failure is expected (Jakub, Sashiko)
- pass pylint --disable=R (Jakub)
- only call ksft_run once (Jakub)
- do not sleep if waiting time is negative (Sashiko)
- add \n when converting error() to fprintf() (Sashiko)
- 4 space indentation, instead of 2 space
- increase sync delay from 100 to 200ms, to fix rare vng flakes
Link: https://patch.msgid.link/20260504174056.565319-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a wrapper similar to existing ip, ethtool, ... commands.
Tc takes a slightly different syntax. Account for that.
The first user is the next patch in this series, converting so_txtime
to drv-net. Pacing offload is supported by selected qdiscs only.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260504174056.565319-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support negative tests, where cmd raises an exception if the command
succeeded.
Add optional argument expect_fail to cmd and bkg. Where fail fails the
test on unexpected error, expect_fail fails it on unexpected success.
Both fail on negative return code. Python subprocess may set a
negative return code on process crash or timeout. Those are never
anticipated failures.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260504174056.565319-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the convenience macro PCI_DEVICE to initialize .vendor, .device,
.subvendor and .subdevice. Drop explicit zeros that the compiler also
fills in.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260504151202.2139919-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .port_max_speed_mode() method is not used anymore since commit
40da0c32c3 ("net: dsa: mv88e6xxx: remove handling for DSA and CPU ports").
Drop it.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260504152653.1389394-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
udp_tunnel: Speed up UDP tunnel device destruction (Part I)
Most of the UDP tunnel devices call synchronize_rcu() twice
during destruction, for example, vxlan has
1) synchronize_rcu() in udp_tunnel_sock_release()
2) synchronize_net() in vxlan_sock_release()
The goal of this series is to remove the former, and another
followup series removes the latter.
synchronize_rcu() was added in udp_tunnel_sock_release() by
commit 3cf7203ca6 ("net/tunnel: wait until all sk_user_data
reader finish before releasing the sock").
This was intended to protect the fast path of a dying vxlan
from dereferencing vxlan_sock->sock->sk after sock_orphan()
has set sock->sk to NULL.
Most of the UDP tunnel devices store struct socket to its
private struct, but it is NOT needed in the fast paths;
struct sock is used there, but struct socket is only used
for tunnel setup / teardown.
This is probably because UDP tunnel functions accept struct
socket, but even such functions do not need it, except for
udp_tunnel_sock_release(), which can safely access sk->sk_socket.
The overview of the series:
Patch 1 - 5 : Convert UDP tunnel helper to take struct sock
Patch 6 : Small fix for 10-years-old bug
Patch 7 - 14 : Store struct sock in tunnel devices
Patch 15 : Remove synchronize_rcu() in udp_tunnel_sock_release()
With this change, a script creating/upping vxlan in 4000 netns
runs 10x faster.
====================
[See Link for benchmark results.]
Link: https://patch.msgid.link/20260502031401.3557229-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3cf7203ca6 ("net/tunnel: wait until all sk_user_data
reader finish before releasing the sock") added synchronize_rcu()
in udp_tunnel_sock_release().
This was intended to protect the fast path of a dying vxlan device
from dereferencing vxlan_sock->sock->sk after sock_orphan() has set
sock->sk to NULL.
However, vxlan does not need to access struct socket itself
in the fast path; it only reads struct sock, and struct socket
is only used for tunnel setup and teardown.
This applies to all other UDP tunnel users, and they have been
converted to access struct sock directly.
In addition, each device-specific struct used in their fast paths
is freed after one RCU grace period. Since this occurs after
udp_tunnel_sock_release(), the struct is guaranteed to be freed
after struct udp_sock.
Therefore, synchronize_rcu() in udp_tunnel_sock_release() is
now redundant.
Let's remove it.
Tested:
A script creating/upping vxlan devices in 4000 netns runs 10x
faster with this change. We can see the same improvement with
other UDP tunnel devices as well.
$ cat vxlan.sh
for i in `seq 1 40`
do
(for j in `seq 1 100` ; do
unshare -n bash -c "ip link add vxlan0 type vxlan id 100 local 127.0.0.1 dstport 4789 && ip link set vxlan0 up";
done) &
done
wait
With bpftrace, we can see vxlan_stop() is significantly faster.
bpftrace -e '
kprobe:vxlan_stop {
@start[tid] = nsecs;
}
kretprobe:vxlan_stop /@start[tid]/ {
@duration_us = hist((nsecs - @start[tid]) / 1000);
delete(@start[tid]);
}
END {
printf("\nExecution time of vxlan_stop (us):\n");
}'
Before:
# time ./vxlan.sh // without bpftrace
real 0m50.615s
user 0m8.171s
sys 1m45.101s
@duration_us:
[4K, 8K) 1266 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[8K, 16K) 1957 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[16K, 32K) 764 |@@@@@@@@@@@@@@@@@@@@ |
[32K, 64K) 6 | |
[64K, 128K) 4 | |
[128K, 256K) 3 | |
After:
# time ./vxlan.sh // without bpftrace
real 0m5.247s
user 0m7.956s
sys 1m47.404s
@duration_us:
[16, 32) 3411 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[32, 64) 383 |@@@@@ |
[64, 128) 107 |@ |
[128, 256) 79 |@ |
[256, 512) 16 | |
[512, 1K) 2 | |
[1K, 2K) 2 | |
Next step is to remove another synchronize_net() in vxlan_stop()
and variants in other devices.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-16-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tipc udp_bearer does not need to access struct socket itself in
the fast path; it only reads struct sock, and struct socket is
only used for tunnel setup and teardown.
Let's store struct sock directly in struct udp_bearer.
Note that cleanup_bearer() calls synchronize_net() after
udp_tunnel_sock_release(), so udp_bearer is not freed until
inflight fast paths finish.
Note also that synchronize_rcu() is added in the error path
of tipc_udp_enable() since udp_bearer will be kfree()d
immediately once we remove synchronize_rcu() in
udp_tunnel_sock_release().
This can be later converted to kfree_rcu().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-15-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pfcp does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct pfcp_dev.
pfcp_del_sock() is called from dev->netdev_ops->ndo_uninit().
The 2nd synchronize_net() in unregister_netdevice_many_notify()
ensures that inflight pfcp RX fast paths finish before pfcp_dev
is freed.
Note that synchronize_rcu() is added in the error path of
pfcp_newlink() since free_netdev() will free pfcp_dev immediately
once we remove synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-14-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amt does not need to access struct socket itself in the fast path;
it only reads struct sock, and struct socket is only used for tunnel
setup and teardown.
Let's store struct sock directly in struct amt.
amt_dev_stop() is called as dev->netdev_ops->ndo_stop().
synchronize_net() in unregister_netdevice_many_notify() ensures
that inflight amt RX fast paths finish before amt_dev is freed.
amt no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Note that amt_dev_stop() looks buggy; cancel_delayed_work_sync()
should be called after udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-13-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fou does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct fou.
fou_release() frees struct fou with kfree_rcu(), so fou no
longer needs synchronize_rcu() in udp_tunnel_sock_release().
Note that the error path in fou_create() looks buggy; once the
tunnel is set up and fou_add_to_port_list() fails, struct fou
should be freed with kfree_rcu() _after_ udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-12-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bareudp does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used
for tunnel setup and teardown.
Let's store struct sock directly in struct bareudp_dev.
bareudp_sock_release() is called from dev->netdev_ops->ndo_stop().
synchronize_net() in unregister_netdevice_many_notify() ensures that
inflight bareudp RX fast paths finish before bareudp_dev is freed.
bareudp no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
geneve does not need to access struct socket itself in the fast
path; it only reads struct sock, and struct socket is only used for
tunnel setup and teardown.
Let's store struct sock directly in struct geneve_sock.
__geneve_sock_release() frees geneve_sock with kfree_rcu(), so
geneve no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will remove synchronize_rcu() in udp_tunnel_sock_release().
We must ensure that vxlan_sock is freed after inflight RX fast path.
Let's free vxlan_sock with kfree_rcu().
Note that vxlan_sock.vni_list[] is 8K and struct rcu_head must
be placed before it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3cf7203ca6 ("net/tunnel: wait until all sk_user_data
reader finish before releasing the sock") added synchronize_rcu()
in udp_tunnel_sock_release().
This was intended to protect the fast path of a dying vxlan device
from dereferencing vxlan_sock->sock->sk after sock_orphan() has set
sock->sk to NULL.
However, vxlan does not need to access struct socket itself in the
fast path; it only reads struct sock, and struct socket is only
used for tunnel setup and teardown.
Let's store struct sock directly in struct vxlan_sock.
In the next patch, we will free vxlan_sock with kfree_rcu(), then
vxlan no longer needs synchronize_rcu() in udp_tunnel_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_tunnel_sock_release() could set sk->sk_user_data to NULL
while vxlan_gro_prepare_receive() is running.
Let's check if rcu_dereference_sk_user_data() is NULL after
skb_gro_remcsum_init().
Fixes: 5602c48cf8 ("vxlan: change vxlan to use UDP socket GRO")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_notify_{add,del}_rx_port() do not need
struct socket.
Let's change udp_tunnel_notify_{add,del}_rx_port() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel_{push,drop}_rx_port() do not need struct socket.
Let's change udp_tunnel_{push,drop}_rx_port() to take struct
sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even udp_tunnel6_dst_lookup() does not need struct socket.
Let's change udp_tunnel6_dst_lookup() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
Even setup_udp_tunnel_sock() does not need struct socket.
Let's change setup_udp_tunnel_sock() to take struct sock
instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
None of the udp_tunnel users need struct socket in their
fast paths; it is only used for tunnel setup / teardown.
While the UDP tunnel interface accepts struct socket, this
encourages users to store the pointer unnecessarily. This
leads to extra dereferences when accessing struct sock fields
(e.g., sk->sk_user_data instead of sock->sk->sk_user_data).
Furthermore, these dereferences necessitate synchronize_rcu()
in udp_tunnel_sock_release() to protect the fast paths from
sock_orphan() setting sk->sk_socket to NULL.
This overhead can be avoided if users store the struct sock
pointer directly in their private structures.
As a prep, let's change udp_tunnel_sock_release() to take
struct sock instead of struct socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260502031401.3557229-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document the MDIO interface topology with an ASCII diagram
showing the MAC, PCS (MMD 3), FEC, Separated PMA (MMD 8), and PMD
(MMD 1) blocks and their interconnects. The diagram illustrates how
4 lanes connect the MAC through PCS, FEC, and PMA, then narrow to
2 lanes at the PMD.
The c45 read and write routines are enhanced to support
read and write of the separated PMA for the fbnic.
Co-developed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260430150802.3521-4-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Consolidate the register reads for boiler plate registers
to reduce LOC and cleanup pcs reads for DEVS1 to
fetch overrides for reserved bits that the hardware does not
return.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260430150802.3521-3-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the constants associated with RS-FEC configuration
and status as well as the indicated separated bits for
DEVS1 to convey a separated PMA.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260430150802.3521-2-mike.marciniszyn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
"tc qdisc show ... handle xxx" filtering can be done by the kernel.
A followup patch can do the same for tcm_parent.
iproute2/tc needs a small companion patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260503114515.2460477-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add airoha_fe_get() and airoha_qdma_get() as utility routines for reading
a masked field from a specified register.
This is a non-functional refactor, no logical changes are introduced to
the existing codebase.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260501-airoha_fe_get-airoha_qdma_get-v3-1-126c6f647ccb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace magic number with register bit macros. The description of
the RTL8211B interrupt register is obtained from publicly available
datasheet (RTL8211B(L) Rev. 1.5 Datasheet)
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20260502092857.156831-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a CVM environment, hardware responses cannot be trusted. The
GDMA_QUERY_MAX_RESOURCES command returns resource limits used to
determine the maximum number of queues.
In mana_gd_query_max_resources(), gc->max_num_queues is initialized
from num_online_cpus() and successively clamped by the hardware-reported
max_eq, max_cq, max_sq, max_rq, and num_msix_usable values. If any of
these hardware values is zero, gc->max_num_queues becomes zero and the
function returns success. This leads to a confusing failure later when
alloc_etherdev_mq() is called with zero queues, returning NULL and
producing a misleading -ENOMEM error.
Add an explicit zero check for gc->max_num_queues after all clamping
steps and return -ENOSPC for a clear early failure, consistent with the
existing gc->num_msix_usable <= 1 guard.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/20260430083627.1873757-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a part of MANA hardening for CVM, validate that max_num_sq and
max_num_rq returned by MANA_QUERY_VPORT_CONFIG are not zero. These
values flow into apc->num_queues, which is used as an allocation count
and loop bound. A zero value would result in zero-size allocations and
incorrect driver behavior.
Return -EPROTO if either value is zero.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Link: https://patch.msgid.link/20260430085638.1875400-1-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ujjal Roy says:
====================
net: bridge: mcast: support exponential field encoding
Description:
This series addresses a mismatch in how multicast query
intervals and response codes are handled across IPv4 (IGMPv3)
and IPv6 (MLDv2). While decoding logic currently exists,
the corresponding encoding logic is missing during query
packet generation. This leads to incorrect intervals being
transmitted when values exceed their linear thresholds.
The patches introduce a unified floating-point encoding
approach based on RFC3376 and RFC3810, ensuring that large
intervals are correctly represented in QQIC and MRC fields
using the exponent-mantissa format.
Key Changes:
* ipv4: igmp: get rid of IGMPV3_{QQIC,MRC} and simplify calculation
Removes legacy macros in favor of a cleaner, unified
calculation for retrieving intervals from encoded fields,
improving code maintainability.
* ipv6: mld: rename mldv2_mrc() and add mldv2_qqi()
Standardizes MLDv2 terminology by renaming mldv2_mrc()
to mldv2_mrd() (Maximum Response Delay) and introducing
a new API mldv2_qqi for QQI calculation, improving code
readability.
* ipv4: igmp: encode multicast exponential fields
Introduces the logic to dynamically calculate the exponent
and mantissa using bit-scan (fls). This ensures QQIC and
MRC fields (8-bit) are properly encoded when transmitting
query packets with intervals that exceed their respective
linear threshold value of 128 (for QQI/MRT).
* ipv6: mld: encode multicast exponential fields
Applies similar encoding logic for MLDv2. This ensures
QQIC (8-bit) and MRC (16-bit) fields are properly encoded
when transmitting query packets with intervals that exceed
their respective linear thresholds (128 for QQI; 32768
for MRD).
* selftests: net: bridge: add MRC and QQIC field encoding tests
Updates bridge selftests to validate both linear and non-linear
(exponential) encoding for MRC and QQIC fields, ensuring
protocol compliance across IGMPv3 and MLDv2.
Impact:
These changes ensure that multicast queriers and listeners
stay synchronized on timing intervals, preventing protocol
timeouts or premature group membership expiration caused
by incorrectly formatted packet headers.
====================
Link: https://patch.msgid.link/20260502131907.987-1-royujjal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
