[Why]
The DSCL memory blocks should be powered down when they're not in use.
This will reduce power consumption.
[How]
1. Write to DSCL_MEM_PWR_FORCE to put memory to shutdown when DSCL is not
used.
2. Added a debug option to allow this behaviour to be turned off
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While booting into OS, driver updates DPP/DISP CLKs.
But init clock value is zero which is invalid.
[How]
Get current clocks value to update init clocks.
To avoid underflow.
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable_link_dp_mst checks that cur_link_settings != unknown to determine
that the link is already enabled, to skip redundant enablement calls for
multiple streams on the same link. During dc_reinitialize_hardware,
cur_link_settings on previously-active links is not cleared, which blocks
MST links from being re-enabled after a reinitialization.
[How]
- check for link_status->link_active instead, as it's the real intent
- clear cur_link_settings when we clear link_active
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dram clock change latencies get updated using ddr4 latency table, but
does that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.
[HOW]
Update latency from 23.84 to 11.72.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The HDR3DLUT and SHAPER memory blocks should be powered down when
they're not in use. This will reduce power consumption.
[How]
1. Write to HDR3DLUT_MEM_PWR_FORCE to put memory to shutdown
when HDR3DLUT is not used.
2. Write to SHAPER_MEM_PWR_FORCE to put memory to shutdown
when SHAPER is not used.
Signed-off-by: Jacky Liao <ziyu.liao@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 2208f39c75.
It caused a regression in internal FPGA tests.
Signed-off-by: Eric Bernstein <Eric.Bernstein@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as Sienna Cichlid and Navy Flounder.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Set dpms off on the connector that was unplugged, for the side effect of
releasing some references held through deallocation of MST payload. This is
the expected behaviour for non MST devices as well.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Recent changes to upstream mst code remove the callback which
cleared the internal state for mst. Move the missing functionality
that was previously called through the destroy call back for mst connector
destroy
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there are 2 gfx rings, the doorbell lower range of second ring
will override the first ring.
Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update GC golden setting for dimgrey_cavefish.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
power profile switch in vcn need to send SetWorkLoad msg to
smu, which is not supported in sriov.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Jiange Zhao <Jiange.Zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's in accordance with pmfw 65.18.0 for navy_flounder.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed warning: no previous prototype.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
4MB reserved VRAM size which used for page tables was not enough for
some condition, increase it to 8MB to reduce page table contention.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The KFDTopologyTest.BasicTest will failed if skip smc, sdma, sos, ta
and asd fw in SRIOV for vega10, so adjust above fw and skip load them
in SRIOV only for navi12.
v2: remove unnecessary asic type check.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
noretry = 0 casue KFDGraphicsInterop test failed
on SRIOV platform for vega10, so set noretry to 1
for vega10.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The struct name smu_state_memroy_block contains a spelling mistake, rename
it to smu_state_memory_block
Fixes: 8554e67d6e ("drm/amd/powerplay: implement power_dpm_state sys interface for SMU11")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:720: warning: Function parameter or member 'vmhub' not described in 'gmc_v9_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'flush_type' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'all_hub' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=]
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'all_hub' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'vmhub' not described in 'gmc_v8_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:998: warning: Function parameter or member 'pasid' not described in 'gmc_v8_0_vm_decode_fault'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'all_hub' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'vmhub' not described in 'gmc_v7_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:771: warning: Function parameter or member 'pasid' not described in 'gmc_v7_0_vm_decode_fault'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi12_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi14_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:227:29: warning: ‘DBGU_IO_BASE’ defined but not used [-Wunused-const-variable=]
227 | static const struct IP_BASE DBGU_IO_BASE ={ { { { 0x000001E0, 0x000125A0, 0x0040B400, 0, 0, 0 } },
| ^~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:127:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=]
127 | static const struct IP_BASE PCIE0_BASE ={ { { { 0x000128C0, 0x00411800, 0x04440000, 0, 0, 0 } },
| ^~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x000120A0, 0x00017400, 0x00401400, 0, 0, 0 } },
| ^~~~~~~~~
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In file included from drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:154:29: warning: ‘XDMA_BASE’ defined but not used [-Wunused-const-variable=
154 | static const struct IP_BASE XDMA_BASE ={ { { { 0x00003400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
Fixes the following W=1 kernel build warning(s):
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:192: warning: Function parameter or member 'async' not described in 'dce_v6_0_page_flip'
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:1050: warning: Cannot understand *
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'job' not described in 'uvd_v3_1_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'addr' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'seq' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Excess function parameter 'fence' description in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_fini'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c:1903: warning: Function parameter or member 'timeout' not described in 'gfx_v6_0_ring_test_ib'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'addr' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'seq' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'flags' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Excess function parameter 'fence' description in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:252: warning: Function parameter or member 'timeout' not described in 'si_dma_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/si_dma.c:408: warning: Function parameter or member 'ring' not described in 'si_dma_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'vmid' not described in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'pd_addr' not described in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Excess function parameter 'vm' description in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'ib' not described in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'tmz' not described in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Excess function parameter 'ring' description in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Function parameter or member 'ib' not described in 'si_dma_emit_fill_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Excess function parameter 'ring' description in 'si_dma_emit_fill_buffer'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1590: warning: Function parameter or member 'instance' not described in 'gfx_v7_0_select_se_sh'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'se_num' description in 'gfx_v7_0_setup_rb'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'sh_per_se' description in 'gfx_v7_0_setup_rb'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1852: warning: Excess function parameter 'adev' description in 'DEFAULT_SH_MEM_BASES'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2086: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_test_ring'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'ridx' description in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'job' not described in 'gfx_v7_0_ring_emit_ib_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_ib_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2351: warning: Function parameter or member 'timeout' not described in 'gfx_v7_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'vmid' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'pd_addr' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_vm_flush'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'job' not described in 'cik_sdma_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'addr' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'seq' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:663: warning: Function parameter or member 'timeout' not described in 'cik_sdma_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:808: warning: Function parameter or member 'ring' not described in 'cik_sdma_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'vmid' not described in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'pd_addr' not described in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Excess function parameter 'vm' description in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'tmz' not described in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_fill_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_fill_buffer'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/dce_v8_0.c:185: warning: Function parameter or member 'async' not described in 'dce_v8_0_page_flip'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'addr' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'seq' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'job' not described in 'uvd_v4_2_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_ib'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:115: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_request_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:115: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_request_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:138: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_release_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:138: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_release_full_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:159: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_reset_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:159: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_reset_gpu'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:194: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_wait_reset'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:194: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_wait_reset'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:210: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_alloc_mm_table'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:210: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_alloc_mm_table'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:239: warning: Function parameter or member 'adev' not described in 'amdgpu_virt_free_mm_table'
drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:239: warning: Excess function parameter 'amdgpu' description in 'amdgpu_virt_free_mm_table'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_ih.c:189: warning: Function parameter or member 'ih' not described in 'cik_ih_get_wptr'
drivers/gpu/drm/amd/amdgpu/cik_ih.c:274: warning: Function parameter or member 'ih' not described in 'cik_ih_set_rptr'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Qinglang Miao <miaoqinglang@huawei.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:127: warning: Function parameter or member 'job' not described in 'amdgpu_ib_schedule'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c:1214: warning: Function parameter or member 'page_flags' not described in 'amdgpu_ttm_tt_create'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Jerome Glisse <glisse@freedesktop.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/radeon/radeon_device.c:637:6: warning: no previous prototype for ‘radeon_device_is_virtual’ [-Wmissing-prototypes]
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting any rotation on the cursor plane is ignored by amdgpu.
Because of DCE/DCN design, it's not possible to rotate the cursor.
Instead of displaying the wrong result, stop advertising the rotation
property for the cursor plane.
Now that we check all cursor plane properties in amdgpu_dm_atomic_check,
remove the TODO.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't allow user-space to set different scaling parameters for the
cursor plane and for the primary plane. Because of DCE/DCN design,
it's not possible to have a mismatch.
The old check in dm_update_plane_state is superseded by this new
check.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looking at handle_cursor_update, it doesn't seem like src_{x,y,w,h}
are picked up by DC. I also tried to change these parameters via a
test KMS client, and amdgpu ignored them. Instead of displaying the
wrong result, reject the atomic commit.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch expands the cursor checks added in "drm/amd/display: add basic
atomic check for cursor plane" to also include a FB size check. Without
this patch, setting a FB smaller than max_cursor_size with an invalid
width would result in amdgpu error messages and a fallback to a 64-byte
width:
[drm:hubp1_cursor_set_attributes [amdgpu]] *ERROR* Invalid cursor pitch of 100. Only 64/128/256 is supported on DCN.
Note that DC uses the word "pitch" when actually checking the FB width.
Indeed, the function handle_cursor_update does this:
attributes.pitch = attributes.width;
In my tests, the cursor FB actually had a pitch of 512 bytes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
