- When kernel lockdown is active userspace tools that rely on read
operations only are unnecessarily blocked. Fix that by avoiding
ioctl registration during lockdown
- Invalid NULL pointer accesses succeed due to the lowcore is always
mapped the identity mapping pinned to zero. To fix that never map
the first two pages of physical memory with identity mapping
- Fix invalid SCCB present check in the SCLP interrupt handler
- Update defconfigs
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaKhfnRccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8KsfAP4m5In0Dv8QMvfxKZuImMcUXN0m
FABuwlSVVoV2dKb0/AD/XX5XVvkg6EWEbAfknaQ06U6WdWQX/3BtS3hfDuLk1gQ=
=4N65
-----END PGP SIGNATURE-----
Merge tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- When kernel lockdown is active userspace tools that rely on read
operations only are unnecessarily blocked. Fix that by avoiding ioctl
registration during lockdown
- Invalid NULL pointer accesses succeed due to the lowcore is always
mapped the identity mapping pinned to zero. To fix that never map the
first two pages of physical memory with identity mapping
- Fix invalid SCCB present check in the SCLP interrupt handler
- Update defconfigs
* tag 's390-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/hypfs: Enable limited access during lockdown
s390/hypfs: Avoid unnecessary ioctl registration in debugfs
s390/mm: Do not map lowcore with identity mapping
s390/sclp: Fix SCCB present check
s390/configs: Set HZ=1000
s390/configs: Update defconfigs
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCaKf/jgAKCRCAXGG7T9hj
vsTcAP0eRBCWDlCTzyuRN+2MpyryoNspFcovhJGwMG16a/7SbgEA/Vi7WqK7Y0XT
/7ovC2AzehL9iJaZvl8hWULVnw9C8Aw=
=gDSN
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two small cleanups which are both relevant only when running as a Xen
guest"
* tag 'for-linus-6.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
drivers/xen/xenbus: remove quirk for Xen 3.x
compiler: remove __ADDRESSABLE_ASM{_STR,}() again
Fixes and New HW Support:
- amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Register driver even if hwmon registration fails
- amd/pmc: Drop SMU F/W match for Cezanne
- dell-smbios-wmi: Separate "priority" from WMI device ID
- hp-wmi: mark Victus 16-r1xxx for Victus s fan and thermal profile support
- intel-uncore-freq: Check write blocked for efficiency latency control
The following is an automated shortlog grouped by driver:
amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Ensure success even if hwmon registration fails
amd: pmc:
- Drop SMU F/W match for Cezanne
dell-smbios-wmi:
- Stop touching WMI device ID
hp-wmi:
- mark Victus 16-r1xxx for victus_s fan and thermal profile support
intel-uncore-freq:
- Check write blocked for ELC
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaKhs0wAKCRBZrE9hU+XO
MQOXAP4zJofX7KXdbIqCpAdlL+zbdDKichzyZG36u+BKdOn8VQEArbQaZoHEq/05
ReoDwmIWS7KWgcbXkZxlwkWYbrOLpwM=
=ZB4H
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/hsmp:
- Ensure sock->metric_tbl_addr is non-NULL
- Register driver even if hwmon registration fails
- amd/pmc: Drop SMU F/W match for Cezanne
- dell-smbios-wmi: Separate "priority" from WMI device ID
- hp-wmi: mark Victus 16-r1xxx for Victus s fan and thermal profile
support
- intel-uncore-freq: Check write blocked for efficiency latency control
* tag 'platform-drivers-x86-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: mark Victus 16-r1xxx for victus_s fan and thermal profile support
platform/x86/amd/hsmp: Ensure success even if hwmon registration fails
platform/x86/amd/hsmp: Ensure sock->metric_tbl_addr is non-NULL
platform/x86/intel-uncore-freq: Check write blocked for ELC
platform/x86/amd: pmc: Drop SMU F/W match for Cezanne
platform/x86: dell-smbios-wmi: Stop touching WMI device ID
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmiobRkQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpnvDEAC6ybsqvNAOSV1Tdk1EQZ/mIrmIb7tVrp/P
zRReWTK9jF7kzOLn2Mqgu0c4RFLCMABXmPb5F2aLx72uSxMSFq2sI9QZCgGzZQeZ
yjOIxFBAPsdgr+gyIOdS3zH04+IKfJw20ojJb83irCgd5M1hpmVwzZ3iGMq8Gs9q
VJQYvKny7tjjpuLpk3DWl7t1J0YV+0sGQhk3iZdWEHrui7mqmfh6DkeB5forTu6z
Gn5e4DNbZvmcvkJQ+Rnkua1UmTZ4hr/+3YV9mqzsWYv+1hOTx/uomGbY7DjSdSyK
vWWNwN97sgAjwhaFgWvB2iRk1pdAb4A3zP+NV1MXheOhHnAT3C6i43DaS1fivone
YKLEqy4v3IzB5WcdlwclJW2qizoLtopu7A4pRURv9v+Q0wb4Q2YM0gRum59QgxZN
+YUhglR5ucazYPmIAxOZMaU/WMIN6m4h3hRa1RkFRNXkBvPGxV2fQxi8exX0QWqf
oxSSfImO0QVjYPlAL7oi0eWwHtqXtebXXdrUNozQdnrEQnimTrxPAuSnfRIv63un
swlaCzfqXXhtl25t9p6Sx7xM7aKF2k7tYnZdSM7JjiOS7KXHFaZcYt3YcoFfdLc7
X/vtT9OQWwnEtqzFKnK8EvcjSN+4KbXwI4neVLmsWK81dwqI2huScB+Xe5eBPidU
6d6dZzUikA==
=mbqK
-----END PGP SIGNATURE-----
Merge tag 'block-6.17-20250822' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A set of fixes for block that should go into this tree. A bit larger
than what I usually have at this point in time, a lot of that is the
continued fixing of the lockdep annotation for queue freezing that we
recently added, which has highlighted a number of little issues here
and there. This contains:
- MD pull request via Yu:
- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode,
the old release with a new kernel now will have warning about
deprecated behavior, and we prepare to remove this legacy mode
after about a year later
- The rename in kernel causing user tools build failure, revert
the rename in mdp_superblock_s
- Fix a regression that interrupted resync can be shown as
recover from mdstat or sysfs
- Improve file size detection for loop, particularly for networked
file systems, by using getattr to get the size rather than the
cached inode size.
- Hotplug CPU lock vs queue freeze fix
- Lockdep fix while updating the number of hardware queues
- Fix stacking for PI devices
- Silence bio_check_eod() for the known case of device removal where
the size is truncated to 0 sectors"
* tag 'block-6.17-20250822' of git://git.kernel.dk/linux:
block: avoid cpu_hotplug_lock depedency on freeze_lock
block: decrement block_rq_qos static key in rq_qos_del()
block: skip q->rq_qos check in rq_qos_done_bio()
blk-mq: fix lockdep warning in __blk_mq_update_nr_hw_queues
block: tone down bio_check_eod
loop: use vfs_getattr_nosec for accurate file size
loop: Consolidate size calculation logic into lo_calculate_size()
block: remove newlines from the warnings in blk_validate_integrity_limits
block: handle pi_tuple_size in queue_limits_stack_integrity
selftests: ublk: Use ARRAY_SIZE() macro to improve code
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
-----BEGIN PGP SIGNATURE-----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=jOfg
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.17-20250822' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Just two small fixes - one that fixes inconsistent ->async_data vs
REQ_F_ASYNC_DATA handling in futex, and a followup that just ensures
that if other opcode handlers mess this up, it won't cause any issues"
* tag 'io_uring-6.17-20250822' of git://git.kernel.dk/linux:
io_uring: clear ->async_data as part of normal init
io_uring/futex: ensure io_futex_wait() cleans up properly on failure
All fixes in drivers. The largest diffstat in ufs is caused by the
doc update with the next being the qcom null pointer deref fix.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaKhBSSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheYBAP9IwgCR
ANnFXfILBJ0vGkZiVsV7lZPtcUChbTT0stGCXAD/axlU11QwE673mlxkVK5JuFGc
fnCdTAt0iM1AqiGiCeI=
=+twj
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in drivers. The largest diffstat in ufs is caused by the doc
update with the next being the qcom null pointer deref fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-qcom: Fix ESI null pointer dereference
scsi: ufs: core: Rename ufshcd_wait_for_doorbell_clr()
scsi: ufs: core: Fix the return value documentation
scsi: ufs: core: Remove WARN_ON_ONCE() call from ufshcd_uic_cmd_compl()
scsi: ufs: core: Fix IRQ lock inversion for the SCSI host lock
scsi: qla4xxx: Prevent a potential error pointer dereference
scsi: ufs: ufs-pci: Add support for Intel Wildcat Lake
scsi: fnic: Remove a useless struct mempool forward declaration
- sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
- sdhci-of-arasan: Ensure CD logic stabilization before power-up
- sdhci-pci-gli: Mask the replay timer timeout of AER for GL9763e
MEMSTICK:
- Fix deadlock by moving removing flag earlier
-----BEGIN PGP SIGNATURE-----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=FuWR
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
- sdhci-of-arasan: Ensure CD logic stabilization before power-up
- sdhci-pci-gli: Mask the replay timer timeout of AER for GL9763e
MEMSTICK:
- Fix deadlock by moving removing flag earlier"
* tag 'mmc-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: Disable HS400 for AM62P SR1.0 and SR1.1
memstick: Fix deadlock by moving removing flag earlier
mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up
mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9763e: Rename the gli_set_gl9763e() for consistency
mmc: sdhci-pci-gli: Add a new function to simplify the code
- Syzkaller found WARN_ON in rxe due to poor lifecycle management of
resources linked to skbs
- Missing error path handling in erdma qp creation
- Initialize the qp number for the GSI QP in erdma
- Mismatching of DIP, SCC and QP numbers in hns
- SRQ bug fixes in bnxt_re
- Memory leak and possibly uninited memory in bnxt_re
- Remove retired irdma maintainer
- Fix kfree() for kvalloc() in ODP
- Fix memory leak in hns
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaKeiiAAKCRCFwuHvBreF
YWZtAQCYRx4n6lVWJ8t954bVZGcxLvruY6SVhR5r7xGTEEW/cwD/VnRJb7fwfgTc
bP7+DIG+qLK2JWVNT4GptgpnjOuDPwY=
=KjJs
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- syzkaller found a WARN_ON in rxe due to poor lifecycle management of
resources linked to skbs
- Missing error path handling in erdma qp creation
- Initialize the qp number for the GSI QP in erdma
- Mismatching of DIP, SCC and QP numbers in hns
- SRQ bug fixes in bnxt_re
- Memory leak and possibly uninited memory in bnxt_re
- Remove retired irdma maintainer
- Fix kfree() for kvalloc() in ODP
- Fix memory leak in hns
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Fix dip entries leak on devices newer than hip09
RDMA/core: Free pfn_list with appropriate kvfree call
MAINTAINERS: Remove bouncing irdma maintainer
RDMA/bnxt_re: Fix to initialize the PBL array
RDMA/bnxt_re: Fix a possible memory leak in the driver
RDMA/bnxt_re: Fix to remove workload check in SRQ limit path
RDMA/bnxt_re: Fix to do SRQ armena by default
RDMA/hns: Fix querying wrong SCC context for DIP algorithm
RDMA/erdma: Fix unset QPN of GSI QP
RDMA/erdma: Fix ignored return value of init_kernel_qp
RDMA/rxe: Flush delayed SKBs while releasing RXE resources
Only small fixes.
- ASoC Cirrus codec fixes
- A regression fix for the recent TAS2781 codec refactoring
- A fix for user-timer error handling
- Fixes for USB-audio descriptor validators
- Usual HD-audio and ASoC device-specific quirks
-----BEGIN PGP SIGNATURE-----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=myx0
-----END PGP SIGNATURE-----
Merge tag 'sound-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only small fixes.
- ASoC Cirrus codec fixes
- A regression fix for the recent TAS2781 codec refactoring
- A fix for user-timer error handling
- Fixes for USB-audio descriptor validators
- Usual HD-audio and ASoC device-specific quirks"
* tag 'sound-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Use correct sub-type for UAC3 feature unit validation
ALSA: timer: fix ida_free call while not allocated
ASoC: cs35l56: Remove SoundWire Clock Divider workaround for CS35L63
ASoC: cs35l56: Handle new algorithms IDs for CS35L63
ASoC: cs35l56: Update Firmware Addresses for CS35L63 for production silicon
ALSA: hda: tas2781: Fix wrong reference of tasdevice_priv
ALSA: hda/realtek: Audio disappears on HP 15-fc000 after warm boot again
ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14
ASoC: codecs: ES9389: Modify the standby configuration
ALSA: usb-audio: Fix size validation in convert_chmap_v3()
ALSA: hda/tas2781: Add name prefix tas2781 for tas2781's dvc_tlv and amp_vol_tlv
ALSA: hda/realtek: Add support for HP EliteBook x360 830 G6 and EliteBook 830 G6
Stable fixes:
- NFS: Fix a data corrupting race when updating an existing write
-----BEGIN PGP SIGNATURE-----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=Yh2D
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fix from Trond Myklebust:
- NFS: Fix a data corrupting race when updating an existing write
* tag 'nfs-for-6.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race when updating an existing write
or aren't considered necessary for -stable kernels. 17 of these fixes are
for MM.
As usual, singletons all over the place, apart from a three-patch series
of KHO followup work from Pasha which is actually also a bunch of
singletons.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaKfFVwAKCRDdBJ7gKXxA
jvZGAQCCRTRgwnYsH0op9Rlxs72zokENbErSzXweWLez31pNpAD/S7bVSjjk1mXr
BQ24ZadKUUomWkghwCusb9VomMeneg0=
=+uBT
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 10 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 17 of these
fixes are for MM.
As usual, singletons all over the place, apart from a three-patch
series of KHO followup work from Pasha which is actually also a bunch
of singletons"
* tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mremap: fix WARN with uffd that has remap events disabled
mm/damon/sysfs-schemes: put damos dests dir after removing its files
mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=m
mm/damon/core: fix damos_commit_filter not changing allow
mm/memory-failure: fix infinite UCE for VM_PFNMAP pfn
MAINTAINERS: mark MGLRU as maintained
mm: rust: add page.rs to MEMORY MANAGEMENT - RUST
iov_iter: iterate_folioq: fix handling of offset >= folio size
selftests/damon: fix selftests by installing drgn related script
.mailmap: add entry for Easwar Hariharan
selftests/mm: add test for invalid multi VMA operations
mm/mremap: catch invalid multi VMA moves earlier
mm/mremap: allow multi-VMA move when filesystem uses thp_get_unmapped_area
mm/damon/core: fix commit_ops_filters by using correct nth function
tools/testing: add linux/args.h header and fix radix, VMA tests
mm/debug_vm_pgtable: clear page table entries at destroy_args()
squashfs: fix memory leak in squashfs_fill_super
kho: warn if KHO is disabled due to an error
kho: mm: don't allow deferred struct page with KHO
kho: init new_physxa->phys_bits to fix lockdep
The riscv_iommu_pte_fetch() function returns either NULL for
unmapped/never-mapped iova, or a valid leaf pte pointer that
requires no further validation.
riscv_iommu_iova_to_phys() failed to handle NULL returns.
Prevent null pointer dereference in
riscv_iommu_iova_to_phys(), and remove the pte validation.
Fixes: 488ffbf181 ("iommu/riscv: Paging domain support")
Cc: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: XianLiang Huang <huangxianliang@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250820072248.312-1-huangxianliang@lanxincomputing.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Much like arm-smmu in commit 7d835134d4 ("iommu/arm-smmu: Make
instance lookup robust"), virtio-iommu appears to have the same issue
where iommu_device_register() makes the IOMMU instance visible to other
API callers (including itself) straight away, but internally the
instance isn't ready to recognise itself for viommu_probe_device() to
work correctly until after viommu_probe() has returned. This matters a
lot more now that bus_iommu_probe() has the DT/VIOT knowledge to probe
client devices the way that was always intended. Tweak the lookup and
initialisation in much the same way as for arm-smmu, to ensure that what
we register is functional and ready to go.
Cc: stable@vger.kernel.org
Fixes: bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/308911aaa1f5be32a3a709996c7bd6cf71d30f33.1755190036.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The arm_smmu_attach_commit() updates master->ats_enabled before calling
arm_smmu_remove_master_domain() that is supposed to clean up everything
in the old domain, including the old domain's nr_ats_masters. So, it is
supposed to use the old ats_enabled state of the device, not an updated
state.
This isn't a problem if switching between two domains where:
- old ats_enabled = false; new ats_enabled = false
- old ats_enabled = true; new ats_enabled = true
but can fail cases where:
- old ats_enabled = false; new ats_enabled = true
(old domain should keep the counter but incorrectly decreased it)
- old ats_enabled = true; new ats_enabled = false
(old domain needed to decrease the counter but incorrectly missed it)
Update master->ats_enabled after arm_smmu_remove_master_domain() to fix
this.
Fixes: 7497f4211f ("iommu/arm-smmu-v3: Make changing domains be hitless for ATS")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250801030127.2006979-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
- Fix NULL de-ref in css_rstat_exit() which could happen after allocation
failure.
- Fix a cpuset partition handling bug and a couple other misc issues.
- Doc spelling fix.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaKd9WQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGd3pAQCkqjlcHyKBOr8AXCcNmisyj0PvSFJwmcCWf3Mu
7gsJ0wEAjxqs+otIPHzjhQlRBMN1vhwn5/B/xVqKO57pCHtrGQY=
=zj8n
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix NULL de-ref in css_rstat_exit() which could happen after
allocation failure
- Fix a cpuset partition handling bug and a couple other misc issues
- Doc spelling fix
* tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup: fixed spelling mistakes in documentation
cgroup: avoid null de-ref in css_rstat_exit()
cgroup/cpuset: Remove the unnecessary css_get/put() in cpuset_partition_write()
cgroup/cpuset: Fix a partition error with CPU hotplug
cgroup/cpuset: Use static_branch_enable_cpuslocked() on cpusets_insane_config_key
A small collection of fixes that came in during the past week, a few
driver specifics plus one fix for the spi-mem core where we weren't
taking account of the frequency capabilities of the system when
determining if it can support an operation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmincWcACgkQJNaLcl1U
h9AZJgf9GgIDY30+6IAW13I+g0UVOWyUi7rz6RN4fC6fNc82+OLfgkR4yKr7a2az
77udyVqy/cgvUEC41OyJ8Tvl8mfPXjOQ8WzobYynq/ldvN4d7JRGeds2rF4qG3rF
yz7sCDZBcBwZYQ5FGTsjawubFOjvgatafVcLUsZ6Q4gyt8lvyHs+Pl3P/XeEVlVZ
GVbqJfzpidpxDxMII5E0TH+YGJwtU0BC0JGB0EfdW9/SKXRp3nkbMJIXVshmy5G3
E8QLVE6brSL7hhDOjOtBfxEb5ddvibsEkNJUg//VfDFh3tTx3BGaFDxaCw/WPGtL
JReicUkzH0bm6Qg++xkVaHh37XFLDw==
=hyVr
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that came in during the past week, a few
driver specifics plus one fix for the spi-mem core where we weren't
taking account of the frequency capabilities of the system when
determining if it can support an operation"
* tag 'spi-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: st: fix PM macros to use CONFIG_PM instead of CONFIG_PM_SLEEP
spi: spi-qpic-snand: fix calculating of ECC OOB regions' properties
spi: spi-fsl-lpspi: Clamp too high speed_hz
spi: spi-mem: add spi_mem_adjust_op_freq() in spi_mem_supports_op()
spi: spi-mem: Add missing kdoc argument
spi: spi-qpic-snand: use correct CW_PER_PAGE value for OOB write
A couple of fairly minor device specific fixes that came in over the
past week or so, plus the addition of an actual maintainer for the
IR38060.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmincPUACgkQJNaLcl1U
h9CCbgf/dhq9uXBrSAEi/bAxMlr0sRPSeqZypnnkgPm7rFG2Ox7B2sZLa03Un8hz
Kus6sUupyX/SHBTNIV+fgO6EXgeoOwXtTEvqdRy9TuA0EQMDM3QWTCkshF2wgMG5
o73ThEaWfLw1kju3NUKgV1szcgQ7VB8qHqlJwor3htPgSTHDq+Rk22lLYJ7oMVNo
E1D075tyJb0hyBlPqVmard5nItWSHYi3SRvATu4to0MLU6iU970NWtzOVzCKzM+i
2TDt84QWqhemvArz08AKTpCYk9azxHbPSlS8UH5UV8WyX4MIfWAUdk5XworIpCPk
0d2jLevYR7BNO5uX1hZD7gqLno6kAg==
=w1wH
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fairly minor device specific fixes that came in over the
past week or so, plus the addition of an actual maintainer for the
IR38060"
* tag 'regulator-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65219: regulator: tps65219: Fix error codes in probe()
regulator: pca9450: Use devm_register_sys_off_handler
regulator: dt-bindings: infineon,ir38060: Add Guenter as maintainer from IBM
- Make ACPI APEI error injection check the version of the request when
mapping the EINJ parameter structure in the BIOS reserved memory to
prevent injecting errors based on an uninitialized field (Tony Luck)
- Fix potential NULL dereference in __einj_error_inject() that may
occur when memory allocation fails (Charles Han)
- Remove the __exit annotation from einj_remove(), so it can be called
on errors during faux device probe (Uwe Kleine-König)
- Use a security-version-number check instead of a runtime version
check during ACPI platform firmware runtime driver updates to prevent
those updates from failing due to false-positive driver version check
failures (Chen Yu)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAminbNQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1ZBYH/RhnnCQasjnY8aWLk/yJAa7cdR9vuJKJ
V5ncMp/7/AYLLa9Bgszb6yh1zUCaaGbLUYroP89BDTUY3tn2NVQbHHD4I3qPX6FI
si4D7y9b5KsJjDOz2BYIcENZP/HqrSLox9tmYrUDh/2ADp7Ph3o9X0k9mFeXLXjx
fl3qGY7/4XTi2OG90Xh7aGo1W/damw0PjpAa0wNR8GY+ZhmiYtoLItCAJDFkTUlw
2Gv3t3nPIJbE6fuNI33nhwMNgG5wfYssC8W1KuFmpxi3VSryFNAMgaGqlWvlkcVt
vMybl2npaqjtTSOkkBaotSLUb7U0UFIa9thyE1o8FEsPDBxgAuyUXKI=
=jbTv
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three new issues in the ACPI APEI error injection code and
an ACPI platform firmware runtime update interface issue:
- Make ACPI APEI error injection check the version of the request
when mapping the EINJ parameter structure in the BIOS reserved
memory to prevent injecting errors based on an uninitialized
field (Tony Luck)
- Fix potential NULL dereference in __einj_error_inject() that may
occur when memory allocation fails (Charles Han)
- Remove the __exit annotation from einj_remove(), so it can be
called on errors during faux device probe (Uwe Kleine-König)
- Use a security-version-number check instead of a runtime version
check during ACPI platform firmware runtime driver updates to
prevent those updates from failing due to false-positive driver
version check failures (Chen Yu)"
* tag 'acpi-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: pfr_update: Fix the driver update version check
ACPI: APEI: EINJ: Fix resource leak by remove callback in .exit.text
ACPI: APEI: EINJ: fix potential NULL dereference in __einj_error_inject()
ACPI: APEI: EINJ: Check if user asked for EINJV2 injection
- Prevent the menu cpuidle governor from selecting idle states with
exit latency exceeding the current PM QoS limit after stopping the
scheduler tick (Rafael Wysocki)
- Make the set subcommand's -t option in the cpupower utility work as
documented and allow it to control the CPU boost feature of cpufreq
beyond x86 (Shinji Nomoto)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAminaMASHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO18vwH/1LQoO0ibu40yBpfjVemwuNGn4jrFV1i
lDnZ03njFGaZ01abjDEeNdggHCRybCmqWVQArEMGzWqCUGo/zmWzyi5apXic6d1A
qSMvFfoZHXdExa2+nm4OHcSCFAHrz+81ACyWlTuObhoPGqo2Mvu/hf2e2kn7uPOG
/HQE1E5sYqLaqBxLhQAfPU7CyfXiM2LL/8Fv7420Z5I85Tx9z6cHa7sUgrNveJxP
BrEm9u9dRKKc/tHL0RGsdCf7Ddff9jF/npjJ0965eSNwJh6Wr3HbcGOKyQcI3Xjx
S+UxijVz1CuZwMmyRHibYj+HV+fsYHbU6G9wQpez5wJBlHNbnI1/kzE=
=DhR+
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpuidle menu governor issue and two issues in the cpupower
utility:
- Prevent the menu cpuidle governor from selecting idle states with
exit latency exceeding the current PM QoS limit after stopping the
scheduler tick (Rafael Wysocki)
- Make the set subcommand's -t option in the cpupower utility work as
documented and allow it to control the CPU boost feature of cpufreq
beyond x86 (Shinji Nomoto)"
* tag 'pm-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: governors: menu: Avoid selecting states with too much latency
cpupower: Allow control of boost feature on non-x86 based systems with boost support.
cpupower: Fix a bug where the -t option of the set subcommand was not working.
- Fix a subtle bug during SCX enabling where a dead task skips init but
doesn't skip sched class switch leading to invalid task state transition
warning.
- Cosmetic fix in selftests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaKdWkg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGWI2AP9e+OTPPHa+sHeM7g3ngigF44nyvvRIPIMJHmZO
7CYT9AD/e+YI+atHzo5iSBcpGwjW8BSLc0ozdrkI0N7XFLXC4go=
=7Ti1
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix a subtle bug during SCX enabling where a dead task skips init
but doesn't skip sched class switch leading to invalid task state
transition warning
- Cosmetic fix in selftests
* tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Remove duplicate sched.h header
sched/ext: Fix invalid task state transitions on class switch
Opcode handlers like POLL_ADD will use ->async_data as the pointer for
double poll handling, which is a bit different than the usual case
where it's strictly gated by the REQ_F_ASYNC_DATA flag. Be a bit more
proactive in handling ->async_data, and clear it to NULL as part of
regular init. Init is touching that cacheline anyway, so might as well
clear it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io_futex_data is allocated upfront and assigned to the io_kiocb
async_data field, but the request isn't marked with REQ_F_ASYNC_DATA
at that point. Those two should always go together, as the flag tells
io_uring whether the field is valid or not.
Additionally, on failure cleanup, the futex handler frees the data but
does not clear ->async_data. Clear the data and the flag in the error
path as well.
Thanks to Trend Micro Zero Day Initiative and particularly ReDress for
reporting this.
Cc: stable@vger.kernel.org
Fixes: 194bb58c60 ("io_uring: add support for futex wake and wait")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag",
breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc
in the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=waf0
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth.
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN
flag", breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid
deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc in
the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management"
* tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: nf_reject: don't leak dst refcount for loopback packets
net/mlx5e: Preserve shared buffer capacity during headroom updates
net/mlx5e: Query FW for buffer ownership
net/mlx5: Restore missing scheduling node cleanup on vport enable failure
net/mlx5: Fix QoS reference leak in vport enable error path
net/mlx5: Destroy vport QoS element when no configuration remains
net/mlx5e: Preserve tc-bw during parent changes
net/mlx5: Remove default QoS group and attach vports directly to root TSAR
net/mlx5: Base ECVF devlink port attrs from 0
net: pse-pd: pd692x0: Skip power budget configuration when undefined
net: pse-pd: pd692x0: Fix power budget leak in manager setup error path
Octeontx2-af: Skip overlap check for SPI field
selftests: tls: add tests for zero-length records
tls: fix handling of zero-length records on the rx_list
net: airoha: ppe: Do not invalid PPE entries in case of SW hash collision
selftests: bonding: add test for passive LACP mode
bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU
bonding: update LACP activity flag after setting lacp_active
Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag"
ipv6: sr: Fix MAC comparison to be constant-time
...
recent patches to add a WARN() when replacing skb dst entry found an
old bug:
WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline]
WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline]
WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234
[..]
Call Trace:
nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325
nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27
expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline]
..
This is because blamed commit forgot about loopback packets.
Such packets already have a dst_entry attached, even at PRE_ROUTING stage.
Instead of checking hook just check if the skb already has a route
attached to it.
Fixes: f53b9b0bdc ("netfilter: introduce support for reject at prerouting stage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250820123707.10671-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When kernel lockdown is active, debugfs_locked_down() blocks access to
hypfs files that register ioctl callbacks, even if the ioctl interface
is not required for a function. This unnecessarily breaks userspace
tools that only rely on read operations.
Resolve this by registering a minimal set of file operations during
lockdown, avoiding ioctl registration and preserving access for affected
tooling.
Note that this change restores hypfs functionality when lockdown is
active from early boot (e.g. via lockdown=integrity kernel parameter),
but does not apply to scenarios where lockdown is enabled dynamically
while Linux is running.
Tested-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 5496197f9b ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Currently, hypfs registers ioctl callbacks for all debugfs files,
despite only one file requiring them. This leads to unintended exposure
of unused interfaces to user space and can trigger side effects such as
restricted access when kernel lockdown is enabled.
Restrict ioctl registration to only those files that implement ioctl
functionality to avoid interface clutter and unnecessary access
restrictions.
Tested-by: Mete Durlu <meted@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Fixes: 5496197f9b ("debugfs: Restrict debugfs when the kernel is locked down")
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The entry of the validators table for UAC3 feature unit is defined
with a wrong sub-type UAC_FEATURE (= 0x06) while it should have been
UAC3_FEATURE (= 0x07). This patch corrects the entry value.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Link: https://patch.msgid.link/20250821150835.8894-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When port buffer headroom changes, port_update_shared_buffer()
recalculates the shared buffer size and splits it in a 3:1 ratio
(lossy:lossless) - Currently, the calculation is:
lossless = shared / 4;
lossy = (shared / 4) * 3;
Meaning, the calculation dropped the remainder of shared % 4 due to
integer division, unintentionally reducing the total shared buffer
by up to three cells on each update. Over time, this could shrink
the buffer below usable size.
Fix it by changing the calculation to:
lossless = shared / 4;
lossy = shared - lossless;
This retains all buffer cells while still approximating the
intended 3:1 split, preventing capacity loss over time.
While at it, perform headroom calculations in units of cells rather than
in bytes for more accurate calculations avoiding extra divisions.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SW currently saves local buffer ownership when setting
the buffer.
This means that the SW assumes it has ownership of the buffer
after the command is set.
If setting the buffer fails and we remain in FW ownership,
the local buffer ownership state incorrectly remains as SW-owned.
This leads to incorrect behavior in subsequent PFC commands,
causing failures.
Instead of saving local buffer ownership in SW,
query the FW for buffer ownership when setting the buffer.
This ensures that the buffer ownership state is accurately
reflected, avoiding the issues caused by incorrect ownership
states.
Fixes: ecdf2dadee ("net/mlx5e: Receive buffer support for DCBX")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a VF has been configured and the user later clears all QoS settings,
the vport element remains in the firmware QoS tree. This leads to
inconsistent behavior compared to VFs that were never configured, since
the FW assumes that unconfigured VFs are outside the QoS hierarchy.
As a result, the bandwidth share across VFs may differ, even though
none of them appear to have any configuration.
Align the driver behavior with the FW expectation by destroying the
vport QoS element when all configurations are removed.
Fixes: c9497c9890 ("net/mlx5: Add support for setting VF min rate")
Fixes: cf7e73770d ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When changing parent of a node/leaf with tc-bw configured, the code
saves and restores tc-bw values. However, it was reading the converted
hardware bw_share values (where 0 becomes 1) instead of the original
user values, causing incorrect tc-bw calculations after parent change.
Store original tc-bw values in the node structure and use them directly
for save/restore operations.
Fixes: cf7e73770d ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver creates a default group (`node0`) and attaches
all vports to it unless the user explicitly sets a parent group. As a
result, when a user configures tx_share on a group and tx_share on
a VF, the expectation is for the group and the VF to share bandwidth
relatively. However, since the VF is not connected to the same parent
(but to the default node), the proportional share logic is not applied
correctly.
To fix this, remove the default group (`node0`) and instead connect
vports directly to the root TSAR when no parent is specified. This
ensures that vports and groups share the same root scheduler and their
tx_share values are compared directly under the same hierarchy.
Fixes: 0fe132eac3 ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adjust the vport number by the base ECVF vport number so the port
attributes start at 0. Previously the port attributes would start 1
after the maximum number of host VFs.
Fixes: dc13180824 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the power supply's power budget is not defined in the device tree,
the current code still requests power and configures the PSE manager
with a 0W power limit, which is undesirable behavior.
Skip power budget configuration entirely when the budget is zero,
avoiding unnecessary power requests and preventing invalid 0W limits
from being set on the PSE manager.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250820133321.841054-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a resource leak where manager power budgets were freed on both
success and error paths during manager setup. Power budgets should
only be freed on error paths after regulator registration or during
driver removal.
Refactor cleanup logic by extracting OF node cleanup and power budget
freeing into separate helper functions for better maintainability.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250820132708.837255-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Octeontx2/CN10K silicon supports generating a 256-bit key per packet.
The specific fields to be extracted from a packet for key generation
are configurable via a Key Extraction (MKEX) Profile.
The AF driver scans the configured extraction profile to ensure that
fields from upper layers do not overwrite fields from lower layers in
the key.
Example Packet Field Layout:
LA: DMAC + SMAC
LB: VLAN
LC: IPv4/IPv6
LD: TCP/UDP
Valid MKEX Profile Configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[30-31]
Invalid MKEX profile configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[2-3] // Overlaps with DMAC field
In another scenario, if the MKEX profile is configured to extract
the SPI field from both AH and ESP headers at the same key offset,
the driver rejecting this configuration. In a regular traffic,
ipsec packet will be having either AH(LD) or ESP (LE). This patch
relaxes the check for the same.
Fixes: 12aa0a3b93 ("octeontx2-af: Harden rule validation.")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250820063919.1463518-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test various combinations of zero-length records.
Unfortunately, kernel cannot be coerced into producing those,
so hardcode the ciphertext messages in the test.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250820021952.143068-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length.
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reported-by: Billy Jheng Bing-Jhong <billy@starlabs.sg>
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250820021952.143068-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dUol
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix a lot of build warnings for LTO-enabled objtool check, increase
COMMAND_LINE_SIZE up to 4096, rename a missing GCC_PLUGIN_STACKLEAK to
KSTACK_ERASE, and fix some bugs about arch timer, module loading, LBT
and KVM"
* tag 'loongarch-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Add address alignment check in pch_pic register access
LoongArch: KVM: Use kvm_get_vcpu_by_id() instead of kvm_get_vcpu()
LoongArch: KVM: Fix stack protector issue in send_ipi_data()
LoongArch: KVM: Make function kvm_own_lbt() robust
LoongArch: Rename GCC_PLUGIN_STACKLEAK to KSTACK_ERASE
LoongArch: Save LBT before FPU in setup_sigcontext()
LoongArch: Optimize module load time by optimizing PLT/GOT counting
LoongArch: Add cpuhotplug hooks to fix high cpu usage of vCPU threads
LoongArch: Increase COMMAND_LINE_SIZE up to 4096
LoongArch: Pass annotate-tablejump option if LTO is enabled
objtool/LoongArch: Get table size correctly if LTO is enabled
A recent lockdep[1] splat observed while running blktest block/005
reveals a potential deadlock caused by the cpu_hotplug_lock dependency
on ->freeze_lock. This dependency was introduced by commit 033b667a82
("block: blk-rq-qos: guard rq-qos helpers by static key").
That change added a static key to avoid fetching q->rq_qos when
neither blk-wbt nor blk-iolatency is configured. The static key
dynamically patches kernel text to a NOP when disabled, eliminating
overhead of fetching q->rq_qos in the I/O hot path. However, enabling
a static key at runtime requires acquiring both cpu_hotplug_lock and
jump_label_mutex. When this happens after the queue has already been
frozen (i.e., while holding ->freeze_lock), it creates a locking
dependency from cpu_hotplug_lock to ->freeze_lock, which leads to a
potential deadlock reported by lockdep [1].
To resolve this, replace the static key mechanism with q->queue_flags:
QUEUE_FLAG_QOS_ENABLED. This flag is evaluated in the fast path before
accessing q->rq_qos. If the flag is set, we proceed to fetch q->rq_qos;
otherwise, the access is skipped.
Since q->queue_flags is commonly accessed in IO hotpath and resides in
the first cacheline of struct request_queue, checking it imposes minimal
overhead while eliminating the deadlock risk.
This change avoids the lockdep splat without introducing performance
regressions.
[1] https://lore.kernel.org/linux-block/4fdm37so3o4xricdgfosgmohn63aa7wj3ua4e5vpihoamwg3ui@fq42f5q5t5ic/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/4fdm37so3o4xricdgfosgmohn63aa7wj3ua4e5vpihoamwg3ui@fq42f5q5t5ic/
Fixes: 033b667a82 ("block: blk-rq-qos: guard rq-qos helpers by static key")
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250814082612.500845-4-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rq_qos_add() increments the block_rq_qos static key when a QoS
policy is attached. When a QoS policy is removed via rq_qos_del(),
we must symmetrically decrement the static key. If this removal drops
the last QoS policy from the queue (q->rq_qos becomes NULL), the
static branch can be disabled and the jump label patched to a NOP,
avoiding overhead on the hot path.
This change ensures rq_qos_add()/rq_qos_del() keep the
block_rq_qos static key balanced and prevents leaving the branch
permanently enabled after the last policy is removed.
Fixes: 033b667a82 ("block: blk-rq-qos: guard rq-qos helpers by static key")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250814082612.500845-3-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a bio has BIO_QOS_THROTTLED or BIO_QOS_MERGED set,
it implicitly guarantees that q->rq_qos is present.
Avoid re-checking q->rq_qos in this case and call
__rq_qos_done_bio() directly as a minor optimization.
Suggested-by : Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250814082612.500845-2-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pm_sleep_ptr() depends on CONFIG_PM_SLEEP while pm_ptr() depends on
CONFIG_PM. Since ST SSC4 implements runtime PM it makes sense using
pm_ptr() here.
For the same reason replace PM macros that use CONFIG_PM. Doing so
prevents from using __maybe_unused attribute of runtime PM functions.
Link: https://lore.kernel.org/lkml/CAMuHMdX9nkROkAJJ5odv4qOWe0bFTmaFs=Rfxsfuc9+DT-bsEQ@mail.gmail.com
Fixes: 6f8584a482 ("spi: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()")
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250820180310.9605-1-rgallaispou@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
