The mclk (master clock) of the cs4271 codec can be an input clock.
In this case the connected clock needs to be enabled outside of any
audio stream. Indeed, this clock is needed for i2c communication.
Add support of this clock and enable it before the first i2c transfer.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20251029093921.624088-5-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Cirrus CS4271 codec can use an external clock as an input Master
Clock. When no crystal is used, the CS4271 component considers its MCLK
pin as an input pin and expects the external clock connected to provide
the Master Clock.
This clock is not documented in the binding.
Add the missing clock.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251029093921.624088-4-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 9a397f4736 ("ASoC: cs4271: add regulator consumer support")
has introduced regulators in the driver.
Regulators are enabled at the beginning of component_probe() but they
are not disabled on errors. This can lead to unbalanced enable/disable.
Fix the error path to disable regulators on errors.
Fixes: 9a397f4736 ("ASoC: cs4271: add regulator consumer support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20251029093921.624088-3-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In parallel with this driver being introduced there was an update in commit
013a3a66f2 ("regmap: sdw-mbq: Don't assume the regmap device is the
SoundWire slave") which changed the API for devm_regmap_init_sdw_mbq_cfg()
resulting in a build break. Update to fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Next installment of the SDCA changes, hopefully the next series after
this should be the full class driver. It is worth noting this series has
a build dependency on a patch working its way through the PM/ACPI tree:
commit ac46f5b6c6 ("ACPICA: Add SoundWire File Table (SWFT) signature")
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
But we can probably worry about that later, as normally there is a
reasonable amount of review on these SDCA series'.
This series broadly breaks down into 3 chunks, first there are several
changes to remove the assumption that the struct device used for SDCA
purposes represents the SoundWire slave. This is because the SDCA class
driver will be made of an auxiliary driver for each SDCA Function, thus
the SoundWire slave will be on the parent device for each individual
driver. Then there are patches to add support for UMP/FDL. And then
finally since the rest of the HID support is there and UMP was the last
missing part required a small patch to add a function to allow reporting
of HID events from SDCA devices.
Merge series from Vitaly Rodionov <vitalyr@opensource.cirrus.com>:
This patch series introduces DAC, CODEC, and SPI control bus support
for Cirrus Logic CS530x variants, along with general code cleanup
and resolution of checkpatch.pl warnings.
Merge series from Chen-Yu Tsai <wens@kernel.org>:
This series enables the SPDIF and I2S hardware found on the Allwinner
A523/A527/T527 family SoCs. These SoCs have one SPDIF interface and
four I2S interfaces. All of them are capable of both playback and
capture, however the SPDIF driver only supports playback.
Merge series from Alexey Klimov <alexey.klimov@linaro.org>:
This is a small patch series that serves as a preparation for
adding HDMI audio playback support on QRB2210 RB1 board.
The patches here are for sound subsystem. The other series
will focus on qcom DT files.
The original series where one of the patches here were taken from is
https://lore.kernel.org/linux-sound/20250302-rb1_hdmi_sound_first-v1-0-81a87ae1503c@linaro.org/
and sndcard compable patch was added as new one.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
---
Changes in v2:
- rewrote commit description and subjects/titles where applicable;
- switched to SoC-level compatible for qrb2210 sndcard, therefore adjusted
DT schema changes;
- Link to v1: https://lore.kernel.org/r/20251007-qrb2210-qcm2290-sndcard-v1-0-8222141bca79@linaro.org
---
Alexey Klimov (2):
ASoC: dt-bindings: qcom,sm8250: add QRB2210 soundcard
ASoC: qcom: sm8250: add qrb2210-sndcard compatible string
Documentation/devicetree/bindings/sound/qcom,sm8250.yaml | 1 +
sound/soc/qcom/sm8250.c | 1 +
2 files changed, 2 insertions(+)
---
base-commit: fe45352cd106ae41b5ad3f0066c2e54dbb2dfd70
change-id: 20251007-qrb2210-qcm2290-sndcard-da54245aae3f
Best regards,
--
Alexey Klimov <alexey.klimov@linaro.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Until now, all products with an amplifier supported by the cs35l56 driver
have shipped with Microsoft Windows pre-installed. The factory calibration
of speaker protection has therefore been done using the Windows driver.
However, products that ship with a Linux-based distro must be able to
perform the factory calibration procedure from within the Linux-based
environment. This patch series adds that support.
NOTE: unfortunately this is yet another series that is mainly ASoC but
also needs some changes to the HDA driver, and they have build dependencies
on the ASoC code. I suggest taking this all through Mark's tree and we'll
avoid sending any other commits to the HDA driver until it has all landed
in Takashi's tree.
Add error handling when memory allocation for dai fails in
spacemit_i2s_init_dai() call.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: tag. It would be easy to make the argument that the
Link: https://patch.msgid.link/20251024-fix-k1-i2s-dai-mem-v1-1-15f5f1ec294a@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TX side of the SPDIF block on the A523 is almost the same the
previous generations, the only difference being that it has separate
module clock inputs for the TX and RX side.
Since this driver currently only supports TX, add support for a
different clock name so that TX and RX clocks can be separated
if RX support is ever added. Then add support for the A523.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251027125655.793277-5-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDIF hardware block in the A523 SoC has the same layout as the
H616 for the transmitter side. However unlike previous generations,
the hardware block now takes separate module clocks for the TX and RX
sides. This presumably allows the hardware to send and receive audio
streams at different sample rates. The new hardware also gained RX
insertion detection, and some extra information registers.
Add a new compatible for it without any fallbacks.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20251027125655.793277-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As far as the author can tell, based on their respective manuals,
the I2S interface controllers found in the Allwinner A523 SoC is the
same as ones in the R329 SoC.
Add a SoC-specific compatible for it, with a fallback to the R329's
compatible.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20251027125655.793277-3-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Now full support for the UMP buffers is available, it is possible to
read the SDCA HID descriptors from the device and pass them to
user-space. Add a helper function to process HID events from an SDCA
device.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-20-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some IRQs (FDL) require processing before the primary soundcard is
brought up, as the downloaded files could be firmware required for
operation of the audio functions of the device. Add a new helper
function which registers the required IRQs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-19-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Several of the UMP transactions in the FDL process should timeout if the
device does not respond within a certain time, add handling into the UMP
helpers and the FDL code to handle this.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-18-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some completions and a helper function to allow other parts of the
system to wait for FDL to complete. The sdca_fdl_sync() function will
wait until it completes a full time out without a new FDL request
happening, this ensures that even parts requiring multiple rounds of FDL
should be fully downloaded before the driver boot continues.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-17-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hookup the XU IRQs required for the FDL process.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-16-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some instances of the XU Entity have a need for Files to be downloaded
from the Host. In these XUs, there is one instance of a Host to Device
(Consumer) UMP, identified by the FDL_CurrentOwner Control. FDL Library
introduced here implements the FDL flow triggered by FDL_CurrentOwner
irq, which sends a file from SoundWire File Table (SWFT) or from the
firmware directory in specific cases, to the Device FDL UMP.
Currently only Direct method of FDL is implemented.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-15-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add parsing of ACPI DisCo information specific to FDL (File DownLoad).
DisCo contains a list of File Sets which can be requested by the device
and within each of those a list of individual files to be downloaded to
the device. Optionally the contents of the files may also be present in
a special ACPI table, called SWFT (SoundWire File Table).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-14-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions for handling Universal Message Passing (UMP)
buffers on SDCA devices. These are generic mechanisms to pass blocks of
binary data between the host and the device, in both directions. They
are used for things like passing HID descriptors and the File Download
process.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse the DisCo property to get the timeout for a Function Reset.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-12-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Parse the DisCo properties for XU Entities.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-11-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Whilst SDCA does specify an Access Mode for each Control, there is not a
1-to-1 mapping between that and ASoC's internal representation. Some
registers require being treated as volatile from the hosts perspective
even in their Access Mode is Read-Write. Add an explicit list of SDCA
controls that should be forced volatile.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the future some IRQs (mostly the UMPs used during File
DownLoad) will need to run after the device has enumerated on the
bus but before the soundcard is actually constructed. As such
refactor more of the IRQ handling to use raw device and regmap
pointers, rather than accessing things through the component.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to locate the sdca_interrupt structure for a given
SDCA IRQ, this makes the code a little more readable and will facilitate
some additions in the future.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently there is a flag to indicate if an IRQ has been requested by
something outside the SDCA core, such that the core can skip requesting
that IRQ. However, it is simpler and more useful to always store the
allocated IRQ number. This will allow the core to see if the IRQ has
been requested, to perform additional operations on the IRQ, and
request IRQs in multiple phases.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store a copy of the device register map in the structure for the IRQ
handlers. This will allow the individual IRQ handlers access to the
device level register map if required.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA HID code can't assume that the struct device it is passed is
the SoundWire slave device. HID is represented by a Function in SDCA and
will thus likely be implemented by a child driver. Update the code to
explicitly pass in the SoundWire slave device.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SDCA interrupt handling is a bit odd, the SDCA IRQ registers are
defined on a device level but the handling of the IRQ is at the
Function level. As such the regmap IRQ's PM runtime operations need to
be on the device itself to ensure those registers are available but an
additional runtime get is required for the Function child when the IRQ
is actually handled. Add the required manual PM runtime gets.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the code assumes that the device that registered the
MBQ register map is the actual SoundWire slave device. This works
fine for all current users, however future SDCA devices will
likely be implemented with the SoundWire slave as a parent device
and separate child drivers with regmaps for each audio Function.
Update the regmap_init_sdw_mbq_cfg macro to allow these two
to be specified separately.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA core processes two different struct device's at various times,
usually it is processing the struct device associated with an individual
SDCA Function driver. However, there are times that it is processing the
struct device associated with the actual SoundWire peripheral, usually
the parent of the Function device.
To ensure this distinction remains clear in the code, rename the variable
when handling the actual SoundWire device to sdev.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a set of test cases for cs_amp_set_efi_calibration_data().
Broadly there are two type of behavior being tested:
How the EFI is updated:
- Create a new EFI
- Overwrite part of existing content
- Overwrite part of zero-filled preallocated content
- Grow the file to append new content
And how the location within the content is chosen:
- Overwrite a specific array entry
- Overwrite an entry with the same calTarget (silicon ID)
- Overwrite a free entry
- Append after existing data
Plus some cases for error conditions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-12-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set cs35l56_base->cal_index to the (zero-based) amp index derived
from cirrus,dev-index property.
This is so that factory calibration data will be written to the UEFI
array in the slot equal to the amp index, for compatibility with the
Windows driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-11-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new command 'store_uefi' to the calibrate debugfs file.
Writing this command will call cs_amp_set_efi_calibration_data()
to save the new data into a UEFI variable. This is intended to
be used after a successful factory calibration.
On systems without UEFI the write to the debugfs file will
return an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-10-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add cs_amp_set_efi_calibration_data() to write an amp calibration
blob to UEFI calibration variable.
The UEFI variable will be updated or created as necessary.
- If a Vendor-specific variable exists it will be updated,
else if the Cirrus variable exists it will be update
else the Cirrus variable will be created.
Some collateral changes are required:
- cs_amp_convert_efi_status() now specifically handles
EFI_WRITE_PROTECTED error.
- cs_amp_get_cal_efi_buffer() can optionally return the name,
guid and attr of the variable it found.
- cs_amp_get_cal_efi_buffer() will update the 'size' field of
the returned data blob if it is zero. The BIOS could have
pre-allocated the UEFI variable as zero-filled
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a pointer argument to cs_amp_get_efi_variable() to optionally
return the EFI variable attributes.
Originally this function internally consumed the attributes from
efi.get_variable(). The calling code did not use the attributes
so this was a small simplification.
However, when writing to a pre-existing variable we would want to
pass the existing attributes to efi.set_variable(). This patch
deals with the change to return the attribute in preparation for
adding code to update the variable.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add test cases for the cs_amp_read_cal_coeffs() and
cs_amp_write_ambient_temp() functions.
In both cases the test is simply to confirm that the correct data
value(s) get passed back to the caller.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create debugfs files that can be used to perform factory calibration.
During manufacture, the production line must perform a factory calibration
of the amps. This commit adds this functionality via debugfs files.
As this is only needed during manufacture, there is no need for this to be
available in a normal system so a Kconfig item has been added to enable
this. The new Kconfig option is inside a sub-menu because items do not
group and indent if the parent is invisible or there are multiple parent
dependencies. Anyway the sub-menu reduces the clutter.
cs35l56_hda_apply_calibration() has been changed to return an error code
that can be reported back through the debugfs write. The original call to
this function doesn't check the return code because in normal use it
doesn't matter whether this fails - the firmware will default to a safe
calibration for the platform. But tooling using the debugfs files might
want to know if there was an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create debugfs files that can be used to perform factory calibration.
During manufacture, the production line must perform a factory calibration
of the amps. This patch adds this functionality via debugfs files.
As this is only needed during manufacture, there is no need for this to be
available in a normal system so a Kconfig item has been added to enable
this. The new Kconfig option is inside a sub-menu because items do not
group and indent if the parent is invisible or there are multiple parent
dependencies. Anyway the sub-menu reduces the clutter.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add core code to support factory calibration. This can be used by both
the ASoC and HDA drivers.
This code consists of implementations of debugfs handlers for three
debugfs files used to start factory calibration and read the results.
This is not a full implementation of debugfs files. There are some
requirements to synchronize with the rest of the amp driver, and the way
this is done is significantly different between ASoC and HDA. Therefore
cs35l56-shared.c provides the main part of the file handlers, but the
files themselves are defined in the ASoC and HDA drivers with suitable
handling before calling into this shared code.
The cal_data file allows the calibration to be read and also for a
previous calibration to be written (for systems where the storage is not
something directly accessible to drivers, such as on filesystems). Code
outside the kernel should treat the content of cal_data as an opaque blob,
so the struct definition is not exported as a user API.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions for performing factory calibration.
cs_amp_read_cal_coeffs() reads the results of a calibration into a
struct cirrus_amp_cal_data. The calTime member is also filled in with
the current time (which is defined to be in Windows format).
cs_amp_write_ambient_temp() writes a given temperature value to the
firmware control for ambient temperature.
The cs_amp_cal_target_u64() has been moved into the header file so
that it can be used by the calling code and by KUnit tests.
cs_amp_create_debugfs() creates a debugfs directory to contain
debugfs files related to calibration. This is placed in a directory
in debugfs root, named "cirrus_logic". The purpose of this is to
make it easier for tooling to find the files it needs by keeping
control of the layout under this directory. By contrast the ASoC
debugfs can vary between kernel releases and doesn't have a strictly
stable naming convention. HDA does not have a debugfs directory at all
and enabling the general ALSA debugfs (which is normally disabled) has
other side-effects.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Read the silicon ID from the amp during one-time cs35l56_hw_init()
and store it in struct cs35l56_base, instead of reading it from
registers every time it is needed.
Note that marking it non-volatile without a default in regmap isn't
a suitable alternative because this causes regcache_sync() to always
write the cached value out to the registers. This could trigger a bus
fault interrupt inside the amp, which we want to avoid.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251021105022.1013685-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct fsi_stream_handler' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
51837 12312 64 64213 fad5 sound/soc/renesas/fsi.o
After:
=====
text data bss dec hex filename
52125 12024 64 64213 fad5 sound/soc/renesas/fsi.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/88ca34df9006b74a7596b91714e700bcff666c4b.1761507792.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS530x device family supports multiple control interfaces.
At present, only the I2C interface is implemented. Adding support
for the SPI control interface, operating at up to 24 MHz.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-12-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for SPI support these structures should be renamed to
reflect that they are for i2c.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://patch.msgid.link/20251023090327.58275-11-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
