The original addition operation in 64-bit unsigned type may encounter
overflow situations. To prevent such issues and safely reject invalid
inputs, the check_add_overflow() function is used.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc768f4dd0)
amdgpu_umc_handle_bad_pages() allocates err_data->err_addr before
querying UMC error information. In the direct and firmware query paths,
the pointer is reassigned to a fresh allocation before the original
buffer is released, so the initial allocation is leaked on each handled
event.
Free the existing buffer before replacing it in those query paths so the
function exit cleanup only owns the active allocation.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 911b1bdd22)
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily
inaccessible via PCIe. Any attempt to access framebuffer or MMIO registers during
this window can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, Unmap all of the applications mappings of the framebuffer
and doorbell BARs before mode1 reset. Also prevent new mappings from coming in
during the reset process.
v2: remove inode in kfd_dev (Christian)
v3: correct unmap offset (Felix), remove prevent new mappings part
to avoid deadlock (Christian)
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 70cadefcc6)
[Why&How]
dc_process_dmub_aux_transfer_async() copies payload->length bytes into a
16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which
is a no-op in release builds. If a caller ever passes length > 16 this
results in a stack buffer overflow via memcpy.
Additionally, link_index is used to dereference dc->links[] without
bounds checking against dc->link_count, risking an out-of-bounds access.
Replace the ASSERT with a hard runtime check that returns false when
payload->length exceeds the destination buffer size, and add a bounds
check for link_index before it is used.
Assisted-by: GitHub Copilot:Claude claude-4-opus
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba4caa9fec)
Cc: stable@vger.kernel.org
[Why&How]
The GPIO pin table parsers in get_gpio_i2c_info() and
bios_parser_get_gpio_pin_info() derive an element count from the VBIOS
table_header.structuresize field, then iterate over gpio_pin[] entries.
However, GET_IMAGE() only validates that the table header itself fits
within the BIOS image. If the VBIOS reports a structuresize larger than
the actual mapped data, the loop reads past the end of the BIOS image,
causing an out-of-bounds read.
Fix this by calling bios_get_image() to validate that the full claimed
structuresize is accessible within the BIOS image before entering the
loop in both functions.
Assisted-by: GitHub Copilot:claude-opus-4-6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba5e95b43b)
Cc: stable@vger.kernel.org
[Why&How]
The bounds check in bios_get_image() computes 'offset + size' using
unsigned 32-bit arithmetic before comparing against bios_size. If a
VBIOS image contains a near-UINT32_MAX offset the addition wraps to a
small value, the comparison passes, and the function returns a wild
pointer past the VBIOS mapping.
Additionally, the comparison uses '<' (strict), which incorrectly
rejects the valid exact-fit case where offset + size == bios_size.
Fix both issues by restructuring the check to avoid the addition
entirely: first reject if offset alone exceeds bios_size, then check
size against the remaining space (bios_size - offset). This eliminates
the overflow and correctly permits exact-fit accesses.
Assisted-by: GitHub Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d40fb392af)
Cc: stable@vger.kernel.org
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bfe9a7545b)
In amdgpu_seq64_alloc there is a possibility that two difference cores
from two separate NODES can try to and could get the same free slot.
So this fixes that race here using atomic test_and_set clear operations.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d50a14d34)
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1f087bb8cf)
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
This may fix VM faults when using VCE 3.
Cc: John Olender <john.olender@gmail.com>
Fixes: e982262214 ("drm/amdgpu: recalculate VCE firmware BO size")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 15c369257b)
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Additionally, increase the VCE_V2_0_DATA_SIZE to
have extra space after the VCE handles.
Also increase the data size used for each VCE handle.
The FW needs 23744 bytes, use 24K to be safe.
This fixes VM faults when using VCE 2.
Cc: John Olender <john.olender@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4802
Fixes: e982262214 ("drm/amdgpu: recalculate VCE firmware BO size")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a20d21df62)
The VCE1 firmware works slightly differently and is already
loaded by vce_v1_0_load_fw(). It doesn't actually need to
call amdgpu_vce_resume().
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 33d8951405)
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
Fixes: d4a640d4b9 ("drm/amdgpu/vce1: Implement VCE1 IP block (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c16fe59f62)
Only allocate entries from the GTT manager when the
VCE GTT node is not allocated yet. This prevents the
possibility of allocating them multiple times, which
causes issues during GPU reset and suspend/resume.
Fixes: 71aec08f80 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8d2a20c172)
Previously, I had assumed this was not possible
so it was OK to not handle it, but now we got a report
from a user who has a board that is configured this way.
When the VCPU BO is already located in a low 32-bit address
in VRAM (eg. when VRAM is mapped to the low address space),
don't do the workaround.
Fixes: 71aec08f80 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f370ec9b16)
The same thing is already checked a few lines above.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c1dc555e76)
When ensuring the low 32-bit address, make sure it is
less than 128 MiB, otherwise the VCE seems to fail to initialize.
This seems to be an undocumented limitation of the firmware
validation mechanism. Note that in case of VCE1 the BAR
address is zero and we can't change it also due to the
firmware validator.
When programming the mmVCE_VCPU_CACHE_OFFSETn registers,
don't AND them with a mask. This is incorrect because
the register mask is actually 0x0fffffff and useless because
we already ensure the addresses are below the limit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e729ae5f3a)
The TLB is organized in groups of 8 entries, each one is 4K.
On Tahiti, the HW requires these GART entries to be 32K-aligned.
This fixes a VCE 1 firmware validation failure that can happen
after suspend/resume since we use amdgpu_gtt_mgr for VCE 1.
v2:
- Change variable declaration order
- Add comment about "V bit HW bug"
Fixes: 698fa62f56 ("drm/amdgpu: Add helper to alloc GART entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 530411b465)
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR
pointers).
Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated
buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the
clamped size before performing arithmetic and copy_to_user().
This ensures we never read beyond the allocated kernel BO regardless of
attacker-supplied MQD field values.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7ef144458f)
In smu_v15_0_fini_smc_tables, dpm_policies was not freed or NULLed, causing a memory leak.
Add kfree() and NULL assignment to properly release memory and avoid dangling pointers.
Fixes: 2beedc3a92 ("drm/amd/pm: Add initial support for smu v15_0_8");
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 014f329074)
Discovery table may be kept at offset 0 by host driver. Remove the
validation check.
Fixes: 01bdc7e219 ("drm/amdgpu: New interface to get IP discovery binary v3")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d3f5bbd007)
va_cursor struct needs to be cleaned even if the mapping
has been removed already.
Also simplify it by make it a void function as return value
check isn't needed as its called during tear down.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d35a45c9b)
amdgpu_gem_userptr_ioctl() currently accepts any value of args->addr
and only discovers an out-of-range pointer much later, inside
amdgpu_gem_object_create() and the HMM mirror registration path.
Userspace can drive that path with kernel-side virtual addresses;
the get_user_pages() layer rejects them, but only after the driver
has already allocated a GEM object and started wiring up notifier
state that then has to be torn down on failure.
Add an access_ok() guard at the top of the ioctl, right after the
existing page-alignment check and before flag validation, so any
address that does not lie within the calling task's user address
range is rejected with -EFAULT before any allocation occurs. No
legitimate ROCm/HSA userspace passes kernel-mode pointers through
this interface, so this is defense-in-depth rather than a behaviour
change for valid callers; -EFAULT matches the convention already
used by other uaccess-style rejections in the kernel.
Also add an explicit #include <linux/uaccess.h>; access_ok() is
otherwise only available transitively through other headers in
this translation unit.
Signed-off-by: Amir Shetaia <Amir.Shetaia@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7a076df363)
VPE1 could possibly hang and fail to power off at the end of commands in
collaboration mode. This workaround adds a COLLAB_SYNC after TRAP to
force instances synchronized to avoid VPE1 fail to power off.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alan liu <haoping.liu@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5171
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a8b749c5c5)
Cc: stable@vger.kernel.org
Pagefaults does not have process information correctly populated
as vm->task is not set during vm_init but should be updated while
real submission. So setting that up during signal_ioctl to get
the correct submission process details.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a9b14d88b4)
While tear down of a userq_mgr is happening when all the queues
are free we should cancel any reset work if pending before exiting.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 160164609f)
It is illegal to schedule reset work from another reset work!
Fix this by scheduling the userq reset work directly on the work queue
of the reset domain.
Not fully tested, I leave that to the IGT test cases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fd9200ccef)
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3bbf32a33)
To access the bo from vm mapping first lock the root bo and
then the object bo of the mapping to make sure both locks
are taken safely.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3aab504106)
- Add more functions to the remote allowed list
randconfig found more functions that are allowed for the remote code for
s390 and arm. Add them to the allowed list.
- Fix remote_test error path
If one of the simple ring buffers fails to load, the code is supposed to
rollback its initialized buffers. Instead of rolling back the buffers for
the failed load, it uses the global variable and rolls back all the
successfully loaded buffers.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCagm9FRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn0xAP0WSYmbUAGYnrq1o5L4EEM61ManFBfp
ta7dmx1Q5SYw6AEAtqbiH42VJZviAmajguyuL0cs9i9exFl+j4SaneejNwg=
=CLqK
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add more functions to the remote allowed list
randconfig found more functions that are allowed for the remote code
for s390 and arm. Add them to the allowed list.
- Fix remote_test error path
If one of the simple ring buffers fails to load, the code is supposed
to rollback its initialized buffers. Instead of rolling back the
buffers for the failed load, it uses the global variable and rolls
back all the successfully loaded buffers.
* tag 'trace-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix desc in error path for the trace remote test module
ring-buffer remote: Avoid unexpected symbol warnings (arm, s390)
When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST),
get_ext_report() allocates a buffer to retrieve a certificate blob from the
host, keeping track of its size in report_req->certs_len.
However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating
an invalid buffer size, as well as the expected length of such buffer.
get_ext_report() subsequently updates report_req->certs_len with the
host-controlled value, and cleans up the buffer by computing a page order
from such value. This is incorrect, as the host-provided length may not
match the page order of the original allocation, potentially resulting
in corruption in the page allocator.
Fix this by using alloc_pages_exact() instead, and reusing @npages to
compute the size passed to free_pages_exact(). For consistency, also
use @npages to compute the size when allocating the pages, even though
this last change has no functional effect.
Fixes: 3e385c0d6c ("virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex")
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Roth <michael.roth@amd.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix use-after-free in irq_work_single() on PREEMPT_RT
(Jiayuan Chen)
- Don't call add_interrupt_randomness() for NMIs
in handle_percpu_devid_irq() (Mark Rutland)
- Remove unused function in the ath79-cpu irqchip driver
causing LKP CI build warnings (Rosen Penev)
- Fix IRQ allocation/teardown leakage regressions in the GICv5
irqchip driver (Sascha Bischoff)
- Fix an IRQ trigger type regression in the Meson S4 SoC irqchip
driver (Xianwei Zhao)
- Fix CPU offlining regression in the RiscV IMSIC irqchip driver
(Yong-Xuan Wang)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rLcN
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull IRQ fixes from Ingo Molnar:
- Fix use-after-free in irq_work_single() on PREEMPT_RT (Jiayuan Chen)
- Don't call add_interrupt_randomness() for NMIs in
handle_percpu_devid_irq() (Mark Rutland)
- Remove unused function in the ath79-cpu irqchip driver causing LKP
CI build warnings (Rosen Penev)
- Fix IRQ allocation/teardown leakage regressions in the GICv5 irqchip
driver (Sascha Bischoff)
- Fix an IRQ trigger type regression in the Meson S4 SoC irqchip driver
(Xianwei Zhao)
- Fix CPU offlining regression in the RiscV IMSIC irqchip driver
(Yong-Xuan Wang)
* tag 'irq-urgent-2026-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
irqchip/riscv-imsic: Clear interrupt move state during CPU offlining
irqchip/meson-gpio: Use the correct register in meson_s4_gpio_irq_set_type()
irqchip/ath79-cpu: Remove unused function
genirq/chip: Don't call add_interrupt_randomness() for NMIs
irqchip/gic-v5: Allocate ITS parent LPIs as a range
irqchip/gic-v5: Support range allocation for LPIs
irqchip/gic-v5: Move LPI allocation into the LPI domain
- Disable satp register probing when no5lvl is specified on the kernel
command line
- Fix a CFI-related issue with the misaligned access speed measurement
code
- Reduce the CFI shadow stack size limit from 4GB to 2GB (following
ARM64 GCS)
- Prevent the kernel from requesting delegation of misaligned access
faults unless a new Kconfig option,
CONFIG_RISCV_SBI_FWFT_DELEGATE_MISALIGNED, is enabled. This will
depend on CONFIG_NONPORTABLE until the deficiencies of the kernel
misaligned access fixup code are fixed
- Fix some potential uninitialized memory accesses in error paths in
compat_riscv_gpr_set() and compat_restore_sigcontext()
- Fix a bug in the RISC-V MIPS vendor errata patching code where a
logical-and was used in place of a bitwise-and
- Drop some unnecessary code in riscv_fill_hwcap_from_isa_string()
- Use macros for isa2hwcap indices in riscv_fill_hwcap(), rather than
open-coding them
- Fix some documentation typos (one affecting "make htmldocs")
-----BEGIN PGP SIGNATURE-----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=yOtI
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Relatively low-impact fixes. Probably the most notable one is that we
no longer ask the monitor-mode firmware to delegate misaligned access
handling to the kernel by default, since the kernel code needs
significant improvement to match the functionality of the firmware.
This change avoids functional problems at some cost in performance,
but shouldn't affect any system with misaligned access handling in
hardware.
- Disable satp register probing when no5lvl is specified on the
kernel command line
- Fix a CFI-related issue with the misaligned access speed
measurement code
- Reduce the CFI shadow stack size limit from 4GB to 2GB (following
ARM64 GCS)
- Prevent the kernel from requesting delegation of misaligned access
faults unless a new Kconfig option, RISCV_SBI_FWFT_DELEGATE_MISALIGNED,
is enabled. This will depend on CONFIG_NONPORTABLE until the
deficiencies of the kernel misaligned access fixup code are fixed
- Fix some potential uninitialized memory accesses in error paths in
compat_riscv_gpr_set() and compat_restore_sigcontext()
- Fix a bug in the RISC-V MIPS vendor errata patching code where a
logical-and was used in place of a bitwise-and
- Drop some unnecessary code in riscv_fill_hwcap_from_isa_string()
- Use macros for isa2hwcap indices in riscv_fill_hwcap(), rather than
open-coding them
- Fix some documentation typos (one affecting 'make htmldocs')"
* tag 'riscv-for-linus-7.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: misaligned: Make enabling delegation depend on NONPORTABLE
riscv: Docs: fix unmatched quote warning
riscv: cfi: reduce shadow stack size limit from 4GB to 2GB
riscv: cpufeature: Use pre-defined ISA ext macros to index isa2hwcap
riscv: mm: Fixup no5lvl failure when vaddr is invalid
riscv: Fix register corruption from uninitialized cregs on error
riscv: errata: Fix bitwise vs logical AND in MIPS errata patching
Documentation: riscv: cmodx: fix typos
riscv: cpufeature: Drop this_hwcap clear in T-Head vector workaround
riscv: Define __riscv_copy_{,vec_}{words,bytes}_unaligned() using SYM_TYPED_FUNC_START
During initialisation in remote_test_load(), if one of the
simple_ring_buffer fails to initialise, the error path attempts to
rollback initialised buffers. However, the rollback incorrectly uses the
global pointer to the trace descriptor, which is only set upon
successful load completion. Fix the error path by using the local
pointer to the descriptor.
Link: https://patch.msgid.link/20260515201616.337469-1-vdonnefort@google.com
Fixes: ea908a2b79 ("tracing: Add a trace remote module for testing")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
base-commit: 5d6919055d
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Sashiko reports:
lm90_alert() executes in the smbus alert context and calls
lm90_update_confreg() to disable the hardware alert line, without
acquiring hwmon_lock.
Concurrently, sysfs write operations (such as lm90_write_convrate) hold
the hwmon_lock, temporarily modify data->config, and then restore it.
If an alert interrupt occurs concurrently with a sysfs write, the sysfs
path will overwrite the alert handler's modifications to data->config
and the hardware register.
This unintentionally re-enables the hardware alert line while the alarm is
still active, causing an interrupt storm.
Add the missing lock to lm90_alert() to solve the problem.
Fixes: 7a1d220ccb ("hwmon: (lm90) Introduce function to update configuration register")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
In lm90_probe(), the devm action to cancel the alert_work and report_work
(lm90_restore_conf) is registered in lm90_init_client() before
devm_hwmon_device_register_with_info() is called.
Because devm executes cleanup actions in reverse order during module
unbind or probe failure, the hwmon device is unregistered and freed first.
If lm90_alert_work() or lm90_report_alarms() runs in the window between
the hwmon device being freed and the delayed works being cancelled,
lm90_update_alarms() will dereference the freed data->hwmon_dev here.
Fix the problem by canceling the workers separately after registering
the hwmon device and before registering the interrupt handler. This ensures
that the workers are canceled after interrupts are disabled and before
the hwmon device is released. Add "shutdown" flag to indicate that device
shutdown is in progress to prevent workers from being re-armed.
Fixes: f6d0775119 ("hwmon: (lm90) Rework alarm/status handling")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
core:
- fix for the fix for the handle change race.
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
amdgpu:
- Userq fixes
- DCN 3.2 fix
- RAS fix
- GC 12 fix
gma500:
- oaktrail_lvds: fix i2c handling
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly
-----BEGIN PGP SIGNATURE-----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=eHJD
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes pull, small and all over fixes, mostly xe and amdgpu,
with some ttm and a core fix for the handle change pain.
core:
- fix for the fix for the handle change race
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
i915:
- Skip __i915_request_skip() for already signaled requests
- Fix VSC dynamic range signaling for RGB formats [dp]
xe:
- Madvise fix around purgeability tracking
- Restore engine mask for specific blitter style
- Couple UAF fixes
- Drop unused ggtt_balloon field
amdgpu:
- Userq fixes
- DCN 3.2 fix
- RAS fix
- GC 12 fix
gma500:
- oaktrail_lvds: fix i2c handling
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly"
* tag 'drm-fixes-2026-05-16' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm: Replace old pointer to new idr
drm/loongson: Use managed KMS polling
drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure
drm/ttm: Convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
drm/gma500/oaktrail_lvds: fix i2c adapter leaks on init
drm/gma500/oaktrail_lvds: fix hang on init failure
drm/gma500/oaktrail_hdmi: fix i2c adapter leak on setup
drm/xe: Drop unused ggtt_balloon field
accel/qaic: Add overflow check to remap_pfn_range during mmap
drm/i915/dp: Fix VSC dynamic range signaling for RGB formats
drm/i915: skip __i915_request_skip() for already signaled requests
drm/bridge: imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
drm/amdgpu/gfx_v12_0: set gfx.rs64_enable from PFP header on GFX12
drm/amd/ras: Fix CPER ring debugfs read overflow
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
drm/amdgpu: fix userq hang detection and reset
drm/amdgpu: remove almost all calls to amdgpu_userq_detect_and_reset_queues
drm/amdgpu: rework amdgpu_userq_signal_ioctl v3
drm/amdgpu: remove deadlocks from amdgpu_userq_pre_reset
drm/xe/dma-buf: fix UAF with retry loop
...
Commit 5e28b7b944 introduced a logical error by failing to replace the
newly generated IDR pointer to old id's pointer at the correct location
within the "change handle" logic; this resulted in the issue reported by
syzbot [1].
Specifically, the new IDR object pointer is intended to replace the original
id's pointer during the normal execution flow.
Additionally, an unnecessary conditional check for the ret exit path has
been removed.
[1]
!RB_EMPTY_ROOT(&prime_fpriv->dmabufs)
WARNING: drivers/gpu/drm/drm_prime.c:224 at drm_prime_destroy_file_private+0x48/0x60 drivers/gpu/drm/drm_prime.c:224, CPU#0: syz.0.17/5833
Call Trace:
drm_file_free.part.0+0x7e6/0xcc0 drivers/gpu/drm/drm_file.c:269
drm_file_free drivers/gpu/drm/drm_file.c:237 [inline]
drm_close_helper.isra.0+0x186/0x200 drivers/gpu/drm/drm_file.c:290
drm_release+0x1ab/0x360 drivers/gpu/drm/drm_file.c:438
Fixes: 5e28b7b944 ("drm: Set old handle to NULL before prime swap in change_handle")
Reported-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7c9eed171647e421013
Cc: stable@vger.kernel.org
Tested-by: syzbot+d7c9eed171647e421013@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/tencent_C267296443AAA4567771176886DFF364A305@qq.com
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
-----BEGIN PGP SIGNATURE-----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=mkSZ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 MPAM fixes from Catalin Marinas:
- Fix NULL dereference and a false-positive warning when the driver
probes hardware with surprising version numbers
- Fix writing values to the wrong registers when probing
cache-utilisation counters. Replace 'NRDY' probing with a version
that is robust for platforms where the bit is writeable by both
hardware and software
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm_mpam: Check whether the config array is allocated before destroying it
arm_mpam: Fix false positive assert failure during mpam_disable()
arm_mpam: Improve check for whether or not NRDY is hardware managed
arm_mpam: Pretend that NRDY is always hardware managed
arm_mpam: Fix monitor instance selection when checking for hardware NRDY
Including:
- AMD-Vi:
- Add bounds checks to debugfs and table lookups
- Intel VT-d:
- Apply an existing quirk for Q35 graphic device.
- Skip dev_pasid teardown for the blocked domain to avoid out-of-bounds
access.
- Return early if dev_pasid is missing to prevent NULL dereference or
UAF.
- Core:
- Fix bugs and corner cases in the pci_dev_reset_iommu_prepare/done()
code. This are some bigger changes including some re-work,
hopefully okay for -rc.
- Fix various issues found by AI in iommupt code.
- MAINTAINERS email address update for RISCV IOMMU.
-----BEGIN PGP SIGNATURE-----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=k+yc
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"This is probably the largest fixes pull-request ever sent for IOMMU. I
partially blame it on AI code review which found some issues but there
is also some rework in here to fix issues in the iommu parts of PCI
device reset.
AMD-Vi:
- Add bounds checks to debugfs and table lookups
Intel VT-d:
- Apply an existing quirk for Q35 graphic device
- Skip dev_pasid teardown for the blocked domain to avoid
out-of-bounds access
- Return early if dev_pasid is missing to prevent NULL dereference
or UAF
Core:
- Fix bugs and corner cases in pci_dev_reset_iommu_prepare/done()
- Fix various issues found by AI in iommupt code
MAINTAINERS email address update for RISCV IOMMU"
* tag 'iommu-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: update Tomasz Jeznach's email address
iommupt: Fix the end_index calculation in __map_range_leaf()
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
iommu: Handle unmap error when iommu_debug is enabled
iommu: Fix up map/unmap debugging for iommupt domains
iommu: Fix loss of errno on map failure for classic ops
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
iommu/vt-d: Fix oops due to out of scope access
iommu/vt-d: Disable DMAR for Intel Q35 IGFX
iommu: Warn on premature unblock during DMA aliased sibling reset
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
iommu: Fix ATS invalidation timeouts during __iommu_remove_group_pasid()
iommu: Fix nested pci_dev_reset_iommu_prepare/done()
iommu: Fix pasid attach in pci_dev_reset_iommu_prepare/done()
iommu: Replace per-group resetting_domain with per-gdev blocked flag
iommu: Fix kdocs of pci_dev_reset_iommu_done()
iommu: Fix NULL group->domain dereference in pci_dev_reset_iommu_done()
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs
- Convert vfio-pci BAR resource requests and iomaps initialization
from a lazy, on-demand model to an eager pre-allocation model to
avoid races while preserving legacy error behavior. Fix unchecked
barmap access in dma-buf export path. (Matt Evans)
- Introduce an implicit unsigned cast in converting vfio-pci device
offsets to region indexes, closing a potential out-of-bounds
access through the vfio_pci_ioeventfd() interface. (Matt Evans)
- Fix a dma-buf kref underflow and stuck wait_for_completion() when
closing a previously revoked dma-buf. (Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=2Sn8
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio
Pull VFIO fixes from Alex Williamson:
- Convert vfio-pci BAR resource requests and iomaps initialization
from a lazy, on-demand model to an eager pre-allocation model to
avoid races while preserving legacy error behavior. Fix unchecked
barmap access in dma-buf export path (Matt Evans)
- Introduce an implicit unsigned cast in converting vfio-pci device
offsets to region indexes, closing a potential out-of-bounds
access through the vfio_pci_ioeventfd() interface (Matt Evans)
- Fix a dma-buf kref underflow and stuck wait_for_completion() when
closing a previously revoked dma-buf (Alex Williamson)
* tag 'vfio-v7.1-rc4' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check BAR resources before exporting a DMABUF
vfio/pci: Set up BAR resources and maps in vfio_pci_core_enable()
vfio/pci: Make VFIO_PCI_OFFSET_TO_INDEX() return unsigned
vfio/pci: fix dma-buf kref underflow after revoke
