Correctly spelled comments make it easier for the reader to understand
the code.
Replace 'platformas' with 'platforms' in the comment &
replace 'prefere' with 'prefer' in the comment &
replace 'corresponsding' with 'corresponding' in the comment &
replace 'harizontal' with 'horizontal' in the comment.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913061727.170198-1-yanzhen@vivo.com
Add macros to check if platform supports bigjoiner/uncompressed joiner.
Replace the existing DISPLAY_VER checks with these.
Additionally use it before readout for joiner stuff, where its missing.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240912132931.1320686-1-ankit.k.nautiyal@intel.com
Panel Self Refresh on eDP requires the AUX IO power to be enabled
whenever the output (main link) is enabled. This is required by the
AUX_PHY_WAKE/ML_PHY_LOCK signaling initiated by the HW automatically to
re-enable the main link after it got disabled in power saving states
(see eDP v1.4b, sections 5.1, 6.1.3.3.1.1).
The Panel Replay mode on non-eDP outputs on the other hand is only
supported by keeping the main link active, thus not requiring the above
AUX_PHY_WAKE/ML_PHY_LOCK signaling (eDP v1.4b, section 6.1.3.3.1.2).
Thus enabling the AUX IO power for this case is not required either.
Based on the above enable the AUX IO power only for eDP/PSR outputs.
Bspec: 49274, 53370
v2:
- Add a TODO comment to adjust the requirement for AUX IO based on
whether the ALPM/main-link off mode gets enabled. (Rodrigo)
Cc: Animesh Manna <animesh.manna@intel.com>
Fixes: b8cf5b5d26 ("drm/i915/panelreplay: Initializaton and compute config for panel replay")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910111847.2995725-1-imre.deak@intel.com
The error state capture still handles display info at a too detailed
level. Start abstracting the whole display snapshot capture and printing
at a higher level. Move overlay to display snapshot first.
Use the same nomenclature and style as in xe devcoredump, in preparation
for perhaps some day bolting the snapshots there as well.
v3: Fix build harder for CONFIG_DRM_I915_CAPTURE_ERROR=n
v2: Fix build for CONFIG_DRM_I915_CAPTURE_ERROR=n (kernel test robot)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ba6a36759600c2d35405c41a0fc9d69f676df77d.1726151571.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
intel_display_params_dump() prints the current display parameters, not
the ones captured during error capture. It's not likely the params get
changed in between, but make it pedantically correct anyway. Pass in the
parameters and driver name to intel_display_params_dump().
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b437a5db768f0cb34377a9e4669c2b37fc7c7c29.1726151571.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move to using intel_display wherever possible in intel_hdcp.c
as a part of code refactor.
--v2
-Move intel_display to the first line wherever possible [Jani]
-use the closest reference when using to_intel_display [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240911090540.643155-2-suraj.kandpal@intel.com
In case of UHBR rates, we do not need to explicitly enable FEC by writing
to DP_TP_CTL register.
For MST use-cases, intel_dp_mst_find_vcpi_slots_for_bpp() takes care of
setting fec_enable to false. However, it gets overwritten in
intel_dp_dsc_compute_config(). This change keeps fec_enable false across
MST and SST use-cases for UHBR rates.
While at it, add a comment explaining why we don't enable FEC in eDP v1.5.
v2: Correct logic to cater to SST use-cases (Jani)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240822061448.4085693-1-chaitanya.kumar.borah@intel.com
UHBR20 is not supported by battlemage and the maximum link rate
supported is UHBR13.5
v2: Replace IS_DGFX with IS_BATTLEMAGE (Jani)
HSD: 16023263677
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Fixes: 98b1c87a5e ("drm/i915/xe2hpd: Set maximum DP rate to UHBR13.5")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827081205.136569-1-arun.r.murthy@intel.com
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the "i830 power well"
code to use it (as much as possible at this stage).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-6-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the lower level
DC state code to use it (as much as possible at this stage).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-4-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
struct intel_display will replace struct drm_i915_private as
the main thing for display code. Convert the CDCLK code to
use it (as much as possible at this stage).
v2: Add local 'display' variable to __intel_display_device_info_runtime_init() (Jani)
Simplify the to_intel_display(crtc_state) stuff (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906143306.15937-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We do not have ALPM on DP Panel Replay. Due to this SRD_STATUS[SRD State]
doesn't change from SRDENT_ON after Panel Replay is enabled until it gets
disabled.
On eDP Panel Replay DEEP_SLEEP is not reached.
_psr2_ready_for_pipe_update_locked is waiting DEEP_SLEEP bit getting reset.
Take these into account in Panel Replay code by not waiting PSR getting
idle after enabling VBI.
Fixes: 29fb595d48 ("drm/i915/psr: Panel replay uses SRD_STATUS to track it's status")
Cc: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906070033.289015-5-jouni.hogander@intel.com
Connector debugfs files are currently not add for MST connector. We
can now add them as we have taken into account possibility to have
NULL in connector->encoder in intel_attached_dp.
v2: remove TODO comment
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906070033.289015-4-jouni.hogander@intel.com
Link training code contains local "connector to intel_dp"
implementation. This was added due to missing MST handling in
intel_attached_dp. Missing MST support is now fixed in
intel_attached_dp. We can now change link training code to use that instead
of local intel_connector_to_intel_dp.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240906070033.289015-3-jouni.hogander@intel.com
Dump the descriptor of the detected LTTPRs in non-transparent mode to
help the debugging related to LTTPRs easier.
v2: Use drm_dp_dump_lttpr_desc() instead of the driver specific
equivalent.
v3: Add empty line between license and header section. (Ankit)
v4: Don't include drm_dp_helper.h twice. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> # v1
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909135627.2926906-1-imre.deak@intel.com
- Drop stale exynos file pattern from MAINTAINERS file
The old "exynos" directory is removed from MAINTAINERS as Samsung Exynos display bindings have been relocated. This resolves a warning from get_maintainers.pl about no files matching the outdated directory.
- Constify struct exynos_drm_ipp_funcs
By making struct exynos_drm_ipp_funcs constant, the patch enhances security by moving the structure to a read-only section of memory. This change results in a slight reduction in the data section size.
- Remove unnecessary code
The function exynos_atomic_commit is removed as it became redundant after a previous update. This cleans up the code and eliminates unused function declarations.
One fixup
- Fix wrong assignment in gsc_bind()
A double assignment in gsc_bind() was flagged by the cocci tool and corrected to fix an incorrect assignment, addressing a potential issue introduced in a prior commit.
-----BEGIN PGP SIGNATURE-----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=3OTa
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Three cleanups
- Drop stale exynos file pattern from MAINTAINERS file
The old "exynos" directory is removed from MAINTAINERS as Samsung Exynos display bindings have been relocated. This resolves a warning from get_maintainers.pl about no files matching the outdated directory.
- Constify struct exynos_drm_ipp_funcs
By making struct exynos_drm_ipp_funcs constant, the patch enhances security by moving the structure to a read-only section of memory. This change results in a slight reduction in the data section size.
- Remove unnecessary code
The function exynos_atomic_commit is removed as it became redundant after a previous update. This cleans up the code and eliminates unused function declarations.
One fixup
- Fix wrong assignment in gsc_bind()
A double assignment in gsc_bind() was flagged by the cocci tool and corrected to fix an incorrect assignment, addressing a potential issue introduced in a prior commit.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909004641.406858-1-inki.dae@samsung.com
Driver Changes:
- Expose fan speed via hwmon (Raag)
- Correction to Wa_14019159160 on ARL (John H)
- Whitelist COMMON_SLICE_CHICKEN1 for UMD access on DG2/MTL/ARL (Dnyaneshwar)
- Do not attempt to load the GSC multiple times to avoid hanging GSC HW (Daniele)
- Populate /sys/class/drm/cardX/engines/ even if one engine fails (Andi)
- Use kmemdup_array instead of kmemdup for multiple allocation (Yu)
- Remove extra unlikely() (Hongbo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztrfr_Wuurfa-3Rv@jlahtine-mobl.ger.corp.intel.com
routine as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
-----BEGIN PGP SIGNATURE-----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=k7C0
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Remove percpu irq related code in the timer-of initialization routine
as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
* tag 'timers_urgent_for_v6.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/imx-tpm: Fix next event not taking effect sometime
clocksource/drivers/imx-tpm: Fix return -ETIME when delta exceeds INT_MAX
clocksource/drivers/timer-of: Remove percpu irq related code
Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZt1VBw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynTEACgzhPgd29DA9pmR+BcDPJtxLBRQtcAoNiAFApH
Gzo5Ucw+Snl5wQvBJGhI
=J4Is
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
