Here are the USB serial updates for 7.3-rc1, including:
- fix digi_acceleport port registration order
- stop digi_acceleport I/O when ports are closed
- fix digi_acceleport OOB port dev_printk()
- fix metro-usb unthrottle race
- fix option slab OOB read with malicious devices
- add support for a new class of Prolific PL256X devices
Included are also various clean ups.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCanx8jhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQgLawD/c6N+U30HtX8XToVPvdur
+QJeRlxiRjJR34ObmZMmDOgBAIm03twNNY3lGj1oagSGYkJ7HaB00lU4AEn+RlAU
3WEK
=CRDf
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 7.3-rc1
Here are the USB serial updates for 7.3-rc1, including:
- fix digi_acceleport port registration order
- stop digi_acceleport I/O when ports are closed
- fix digi_acceleport OOB port dev_printk()
- fix metro-usb unthrottle race
- fix option slab OOB read with malicious devices
- add support for a new class of Prolific PL256X devices
Included are also various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add support for PL256X multi-port devices
USB: serial: option: fix slab OOB read in interrupt URB callback
USB: serial: keyspan_pda: drop unused driver data usb-serial pointer
USB: serial: metro-usb: drop redundant initialisations
USB: serial: metro-usb: fix unthrottle race
USB: serial: metro-usb: replace unnecessary atomic allocation
USB: serial: digi_acceleport: fix oob port dev_printk()
USB: serial: digi_acceleport: clean up inb command submission
USB: serial: digi_acceleport: clean up write completion
USB: serial: digi_acceleport: clean up xfer buf length expression
USB: serial: digi_acceleport: drop unused in-buf define
USB: serial: digi_acceleport: stop OOB I/O when not in use
USB: serial: digi_acceleport: drop redundant driver data sanity checks
USB: serial: digi_acceleport: clean up declarations and whitespace
USB: serial: digi_acceleport: add oob port helper
USB: serial: digi_acceleport: always stop write urb on close
USB: serial: digi_acceleport: drop unused wait queue
USB: serial: digi_acceleport: fix port registration order
USB: serial: digi_acceleport: do not log stopping of urbs as errors
Here is a fix for a long-standing issue in the spcp8x5 driver which
syzbot just started hitting and a change adding lockdep annotation to
digi_acceleport to suppress a false positive deadlock warning.
Note that only the digi_acceleport commit has been in linux-next (and
with no reported issues).
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCanXwpBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQhhtgD8Cup01TId2ScE+750zDMX
0rTVhmBkTQIVzX1FjVdG1zsA/jdPLkV9cXUQhkJDS5mIqLcCLU606omTWzdiBnsl
zI0P
=naXW
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-7.2-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial fixes for 7.2-rc7
Here is a fix for a long-standing issue in the spcp8x5 driver which
syzbot just started hitting and a change adding lockdep annotation to
digi_acceleport to suppress a false positive deadlock warning.
Note that only the digi_acceleport commit has been in linux-next (and
with no reported issues).
* tag 'usb-serial-7.2-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: spcp8x5: drop broken carrier detect support
USB: serial: digi_acceleport: add port lock nesting annotation
The driver does not support modem status notifications and instead used
to fetch the modem status once at open() and subsequently operate on and
report stale state.
As part of fixing this, a call to fetch the status was added to
carrier_raised(), which does not work as that callback must not sleep
(e.g. unlike tiocmget()).
Drop the broken carrier detect support.
Fixes: e1ed212d85 ("USB: spcp8x5: add proper modem-status support")
Cc: stable@vger.kernel.org # 3.10
Reported-by: syzbot+3b514b87202742f22c44@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/6a73cea2.01d0871a.3a0d52.000d.GAE@google.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Prolific PL256X devices are multi-port USB-to-UART controllers,
including the PL2533, PL2543 and PL2565 variants.
These devices use vendor requests that differ from those used by the
existing TYPE_HX and TYPE_HXN devices. They also require a separate UART
reset request and use a port-specific register for configuring flow
control.
Add a new TYPE_MP device type and select the appropriate vendor requests,
reset operation and flow-control register for PL256X devices. Store the
USB interface number so that requests can be directed to the corresponding
UART port.
Detect the supported PL256X variants using bcdDevice before issuing any
legacy vendor requests, as PL256X devices do not accept those requests.
PL256X devices support baud rates up to 24 Mbps and do not use divisor
encoding.
Signed-off-by: Charles Yeh <charlesyeh522@gmail.com>
Link: https://lore.kernel.org/all/CAAZvQQ6O4p35Xs2hVYaoJxD4D7U0YonsdweuPh6W8RQVhvoUNw@mail.gmail.com/
Signed-off-by: Johan Hovold <johan@kernel.org>
The interrupt URB buffer is allocated in setup_port_interrupt_in() based
on the endpoint's wMaxPacketSize:
buffer_size = usb_endpoint_maxp(epd);
port->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
When a USB device declares wMaxPacketSize = 8 on its interrupt IN
endpoint, the buffer is allocated from kmalloc-8 cache (exactly
8 bytes).
If the device sends a short packet (actual_length < wMaxPacketSize),
the URB completes with status == 0 and the callback proceeds to read:
data[sizeof(struct usb_ctrlrequest)]
which evaluates to data[8], accessing 1 byte beyond the allocated 8-byte
buffer. This results in a slab out-of-bounds read.
Fix this by adding the missing bounds check: first verify that the
actual length is large enough to contain the struct usb_ctrlrequest
header before accessing req_pkt->bRequestType and req_pkt->bRequest,
and then verify that there is an additional byte for the modem signal
state before reading data[sizeof(struct usb_ctrlrequest)] inside the
conditional. Use sizeof(*req_pkt) instead of sizeof(struct
usb_ctrlrequest) for consistency.
Assisted-by: Claude:deepseek-v4-pro
Signed-off-by: Jiale Yao <yaojiale02@163.com>
Fixes: 58cfe9113e ("[PATCH] USB: add Option Card driver")
Cc: stable@vger.kernel.org # v2.6.12
[ johan: use dev_err(); split signals declaration and initialisation ]
Signed-off-by: Johan Hovold <johan@kernel.org>
The interrupt-status packet reports transmit credits returned by the
device. edge_interrupt_callback() adds the 16-bit value to txCredits
without checking maxTxCredits.
edge_write() uses txCredits minus the software FIFO count as the amount
of data that fits. Since the FIFO is allocated with maxTxCredits bytes,
txCredits exceeding maxTxCredits can cause OOB write in ring buffer.
Cap accumulated credits at maxTxCredits. Conforming devices should never
hit the cap.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5
Signed-off-by: Sunho Park <shpark061104@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
do_boot_mode() copies the firmware payload, excluding its four-byte prefix,
into a fixed 15.5 KiB staging buffer. check_fw_sanity() already proves that
the image contains its seven-byte header and validates the declared image
length and checksum, but it does not impose this boot-mode destination
limit.
Reject images whose payload does not fit before allocating and filling the
staging buffer.
Fixes: d12b219a22 ("edgeport-ti: use request_firmware()")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
mxuport_probe() reads version bytes at fixed offsets after
request_firmware() succeeds. Firmware loading success does not prove that
the blob reaches the highest version offset.
Reject short firmware images before reading the version bytes. This is
source-level parser hardening; no affected device or crash was observed.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Fixes: ee467a1f20 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
The Commubox FXA291 by Endress+Hauser AG is a USB serial converter
based on FT232B which is used to communicate with field devices.
It enumerates using the FTDI vendor ID and a custom PID.
usb 1-9: New USB device found, idVendor=0403, idProduct=e510, bcdDevice= 4.00
usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9: Product: FXA291
usb 1-9: Manufacturer: Endress+Hauser
usb 1-9: SerialNumber: 00000000
ftdi_sio 1-9:1.0: FTDI USB Serial Device converter detected
usb 1-9: Detected FT232B
usb 1-9: FTDI USB Serial Device converter now attached to ttyUSB0
Signed-off-by: Tim Pambor <timpambor@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Killing the interrupt-in urb when the line disciple requests throttling
may lead to data loss if an ongoing transfer is cancelled.
Instead set a flag to prevent the completion handler from resubmitting
the urb until the port is unthrottled.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The driver data usb-serial pointer is unused since commit 66c32e4833
("USB: serial: keyspan_pda: drop redundant usb-serial pointer"), which
apparently failed to remove the pointer as intended.
Signed-off-by: Johan Hovold <johan@kernel.org>
Three functions are initialising their return value variables at
declaration only to later assign them unconditionally.
Signed-off-by: Johan Hovold <johan@kernel.org>
If the completion handler races with unthrottle() both functions may try
to resubmit the same interrupt-in urb, but at most one will succeed.
Fix the unthrottle logic using a throttle-requested flag so that only
one attempt to resubmit the urb is made to avoid logging an error.
Fixes: 43d186fe99 ("USB: serial: add metro-usb driver to the tree")
Signed-off-by: Johan Hovold <johan@kernel.org>
The unthrottle callback is allowed to sleep so pass the correct GFP flag
to usb_submit_urb() to avoid unnecessary atomic allocations.
Signed-off-by: Johan Hovold <johan@kernel.org>
The OOB port is not registered with driver core and does not have a
name.
Use the USB interface with dev_printk() that may involve the OOB port to
avoid log entries with no driver and a "null" device name.
Fixes: f9dfbebb8b ("USB: serial: digi_acceleport.c: remove dbg() usage")
Fixes: 194343d936 ("USB: remove use of err() in drivers/usb/serial")
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the inb command handling a bit by removing an unnecessary line
break and moving the assignment operator before breaking another long
expression.
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the write completion handler by adding a temporary variable for
the transfer buffer and using the pre-existing urb pointer while
dropping some redundant casts.
Signed-off-by: Johan Hovold <johan@kernel.org>
Add the missing space around operators in transfer-buffer length
expressions to make the code more readable.
Signed-off-by: Johan Hovold <johan@kernel.org>
Drop the in-buf size define which has not been used since the port
buffers were removed by commit 5fea2a4dab ("USB: digi_acceleport
further buffer clean up").
Signed-off-by: Johan Hovold <johan@kernel.org>
The driver submits the OOB read urb on first open of a port and does not
stop it until the device is disconnected.
Add an open counter and submit the urb on first open and stop it on last
close to avoid wasting resources (e.g. power) when the device is not in
use.
Signed-off-by: Johan Hovold <johan@kernel.org>
The urb context pointer does not change while an urb is in flight so
there is never a need to check for NULL on completion.
The port driver data is not freed until the port is unbound at which
point all I/O for that port has been stopped (and I/O is no longer
started for a port that has not yet been probed).
The device driver data is not freed until after the driver has been
unbound and at which point all I/O has also ceased.
Drop the redundant, overly defensive (and still incomplete) sanity
checks from the completion callbacks.
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the driver by moving some declarations to approximate reverse
xmas style and removing some stray newlines (and adding a few for
readability).
While at it, also replace two spaces before tabs in the driver structs.
Signed-off-by: Johan Hovold <johan@kernel.org>
Explicitly stop the write urb on close() also if the device is being
unbound instead of relying on core to do it after returning.
Note that the dp_write_urb_in_use flag is cleared by the completion
handler.
Signed-off-by: Johan Hovold <johan@kernel.org>
Drop the close wait queue which has not been used since commit
335f8514f2 ("tty: Bring the usb tty port structure into more use").
Signed-off-by: Johan Hovold <johan@kernel.org>
The driver submits the read urbs for all ports when the first port is
opened, which could happen before the other ports have been probed and
their private data set up.
If such an urb completes before the port has been probed, the completion
handler will not resubmit it, thus preventing any further reads.
Fix the ordering issue by not submitting the port read urbs until the
port is opened.
This also avoids wasting resources (e.g. power) when ports are not in
use.
Note that the port write urbs are already stopped on close (unless
unbinding, but they are also stopped by core on disconnect).
Fixes: fb44ff854e ("USB: digi_acceleport: fix port-data memory leak")
Signed-off-by: Johan Hovold <johan@kernel.org>
Stopping an urb is not an error and should not be logged as such.
Demote the dev_err() in the read bulk completion handler to dev_dbg()
when an urb is being unlinked on disconnect.
Note that this will become more of an issue when the urbs are stopped
every time a port is closed.
This issue was flagged by Sashiko when reviewing the upcoming change.
Link: https://sashiko.dev/#/patchset/20260623150826.314727-1-johan%40kernel.org?part=2
Signed-off-by: Johan Hovold <johan@kernel.org>
USB probe functions should not keep usb_device_id for longer than probe due
to presence of dynamic ID removal. USB serial does not support ID removal,
however in this case only driver_data is ever needed, there is no reason
keeping the usb_device_id in the first place, so convert it as well.
Reviewed-by: Manuel Ebner <manuelebner@mailbox.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260707-usb_dyn_id_uaf-v2-3-632dcf3adfba@garyguo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The write() callback is supposed to return the number of characters
accepted or a negative errno. Since the addition of write fifo support
the keyspan_pda implementation will however return the number characters
submitted to the device if the write urb is not already in use. If this
number is larger than the number of characters passed to write(), the
line discipline continues writing data from beyond the tty write buffer.
Fix the information leak by making sure that keyspan_pda_write_start()
returns zero on success as intended.
Fixes: 034e38e8f6 ("USB: serial: keyspan_pda: add write-fifo support")
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Johan Hovold <johan@kernel.org>
If the port is closed while throttled, the read urb is never resubmitted
and the port will not receive any further data until the device is
reconnected (or the driver is rebound).
Clear the throttle flags and submit the urb if needed when opening the
port.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
If submitting the OOB write urb fails persistently (e.g if the device is
being disconnected) the driver would loop indefinitely with interrupts
disabled.
Check for urb submission errors when sending OOB commands to avoid
hanging if, for example, open(), set_termios() or close() races with a
physical disconnect.
This is issue was flagged by Sashiko when reviewing an unrelated change
to the driver.
Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=1
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The digi_write_inb_command() is supposed to wait for the write urb to
become available or return an error, but instead it updates the transfer
buffer and tries to resubmit the urb on timeout.
To make things worse, for commands like break control where no timeout
is used, the driver would corrupt the urb immediately due to a broken
jiffies comparison (on 32-bit machines this takes five minutes of uptime
to trigger due to INITIAL_JIFFIES).
Fix this by adding the missing return on timeout and waiting
indefinitely when no timeout has been specified as intended.
This issue was (sort of) flagged by Sashiko when reviewing an unrelated
change to the driver.
Link: https://sashiko.dev/#/patchset/20260610132232.356139-1-johan%40kernel.org?part=11
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly.
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCajk1lg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymieQCg1VgSwN2sXBtMDGi4Sca+ecADx2kAn0bm/e/C
JjShAcuQ/vj/6zNJm0ll
=vXkP
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.
Lots of little stuff in here, major highlights include:
- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly
- Other thunderbolt updates and changes to make the stream code work
- xhci driver updates and additions
- typec driver updates and additions
- usb gadget driver updates and fixes for reported issues
- zh_CN documentation translation of the USB documentation
- usb-serial driver updates
- dts cleanups for some USB platforms
- other minor USB driver updates and tweaks
All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"
* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...
Here are the USB serial updates for 7.2-rc1, including:
- an updated mxuport number-of-ports encoding, and
- include directive cleanups
Everything has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaiwrpxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQin0AD+Pmi/7pYnsXrtG23IlJcG
7yN+6umH7JDovE9FaSRRidkA/1SUxzr+qi6smI4YdvpUZ9tp+aPbyGu57ZaFXw6j
fPUN
=ONdv
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 7.2-rc1
Here are the USB serial updates for 7.2-rc1, including:
- an updated mxuport number-of-ports encoding, and
- include directive cleanups
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-7.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: whiteheat: drop termbits include
USB: serial: add missing atomic includes
USB: serial: garmin_gps: drop unused atomic include
USB: serial: drop unused moduleparam includes
USB: serial: drop unused uaccess includes
USB: serial: xr: add missing uaccess include
USB: serial: drop unused tty_flip includes
USB: serial: drop unused tty_driver includes
USB: serial: mxuport: update number-of-ports encoding
klsi_105_prepare_write_buffer() is called by the generic write path
with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It
stores a two-byte length header at the start of the buffer and copies
the payload from the write fifo starting at buf + KLSI_HDR_LEN, but
passes the full buffer size as the number of bytes to copy:
count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN,
size, &port->lock);
When the fifo holds at least size bytes, size bytes are copied starting
two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its
end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for
the header as safe_serial already does.
Writing bulk_out_size or more bytes to the tty triggers a slab
out-of-bounds write, observed with KASAN by emulating the device with
dummy_hcd and raw-gadget:
BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0
Write of size 64 at addr ffff888112c62202 by task python3
kfifo_copy_out
klsi_105_prepare_write_buffer [kl5kusb105]
usb_serial_generic_write_start [usbserial]
Allocated by task 139:
usb_serial_probe [usbserial]
The buggy address is located 2 bytes inside of allocated 64-byte region
The out-of-bounds write no longer occurs with this change applied.
Fixes: 60b3013cda ("USB: kl5usb105: reimplement using generic framework")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
build_i2c_fw_hdr() allocates a fixed-size buffer of
(16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then
copies le16_to_cpu(img_header->Length) bytes into it without
validating that Length fits within the available space after the
firmware record header.
img_header->Length is a __le16 from the firmware file and can be
up to 65535. check_fw_sanity() validates the total firmware size
but not img_header->Length specifically.
Fix by rejecting images where img_header->Length exceeds the
available destination space.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Korwel <adriank20047@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the
device I2C EEPROM into a buffer allocated with kmalloc_obj(), which
is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes.
The Size field comes from the device and is only validated (in
check_i2c_image()) to make sure the descriptor fits within
TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size.
A malicious USB device can therefore set Size to any value up to 16377,
causing a heap overflow of up to 16367 bytes when plugged into a host
running this driver.
valid_csum() is called after read_rom() and also iterates
buffer[0..Size-1], compounding the out-of-bounds access.
Fix by rejecting descriptors with unexpected length before calling
read_rom().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Korwel <adriank20047@gmail.com>
[ johan: amend commit message; also check for short descriptors ]
Signed-off-by: Johan Hovold <johan@kernel.org>
cypress_read_int_callback() parses the interrupt-in buffer according to
the selected Cypress packet format. Format 1 has a two-byte status/count
header and format 2 has a one-byte combined status/count header. The
usb-serial core sizes the interrupt-in buffer from the endpoint
descriptor's wMaxPacketSize, and successful interrupt transfers can
complete short when URB_SHORT_NOT_OK is not set.
Check that the completed packet contains the selected header before
reading it. Malformed short reports are ignored and the interrupt URB is
resubmitted through the existing retry path, preventing out-of-bounds
header-byte reads.
KASAN report as below:
KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0
Read of size 1
Call trace:
cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009)
__usb_hcd_giveback_urb()
dummy_timer()
Fixes: 3416eaa1f8 ("USB: cypress_m8: Packet format is separate from characteristic size")
Assisted-by: Codex:gpt-5.5
Signed-off-by: Zhang Cen <rollkingzzc@gmail.com>
Fixes: 3416eaa1f8 ("USB: cypress_m8: Packet format is separate from characteristic size")
Cc: stable@vger.kernel.org # 2.6.26
[ johan: use constants in header length sanity checks ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Make sure that the bulk-out buffer size is at least eight bytes to avoid
user-controlled slab corruption in "safe" mode should a malicious device
report a smaller size.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Make sure that the bulk-out endpoint max packet size is at least eight
bytes to avoid user-controlled slab corruption should a malicious device
report a smaller size.
Fixes: ee467a1f20 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver")
Cc: stable@vger.kernel.org # 3.14
Cc: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Make sure that the interrupt-out endpoint max packet size is at least
eight bytes to avoid user-controlled slab corruption or NULL-pointer
dereference should a malicious device report a smaller size.
Fixes: 3416eaa1f8 ("USB: cypress_m8: Packet format is separate from characteristic size")
Cc: stable@vger.kernel.org # 2.6.26
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
