Migrate CRTC mode configuration to use standard DRM bus flags in
preparation for removing the tilcdc_panel driver and its custom
tilcdc_panel_info structure.
Add support for DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE and
DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE flags to control pixel clock and sync
signal edge polarity, while maintaining backward compatibility with the
existing tilcdc panel info structure.
Simplify several hardware parameters by setting them to fixed defaults
based on common usage across existing device trees:
- DMA burst size: 16 (previously configurable via switch statement)
- AC bias frequency: 255 (previously panel-specific)
- FIFO DMA request delay: 128 (previously panel-specific)
These parameters show no variation in real-world usage, so hardcoding
them simplifies the driver without losing functionality.
Preserve FIFO threshold configurability by detecting the SoC type, as
this parameter varies between AM33xx (8) and DA850 (16) platforms.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-4-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc hardware does not generate VESA-compliant sync signals. It
aligns the vertical sync (VS) on the second edge of the horizontal sync
(HS) instead of the first edge. To compensate for this hardware
behavior, the driver applies a timing adjustment in mode_fixup().
Previously, this adjustment was conditional based on the simulate_vesa_sync
flag, which was only set when using external encoders. This appears
problematic because:
1. The timing adjustment seems needed for the hardware behavior regardless
of whether an external encoder is used
2. The external encoder infrastructure is driver-specific and being
removed due to design issues
3. Boards using tilcdc without bridges (e.g., am335x-evm, am335x-evmsk)
may not be getting the necessary timing adjustments
Remove the simulate_vesa_sync flag and apply the VESA sync timing
adjustment unconditionally, ensuring consistent behavior across all
configurations. While it's unclear if the previous conditional behavior
was causing actual issues, the unconditional adjustment better reflects
the hardware's characteristics.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-3-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Mark the ti,tilcdc,panel binding as deprecated in the documentation.
This legacy binding should no longer be used for new designs. Users
should migrate to the standard DRM panel bindings instead.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-2-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Convert the device tree binding documentation for tilcdc
from plain text to DT binding schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-1-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Convert to the non-deprecated mipi_dsi_*_multi() helpers per the TODO
list. This reduces boilerplate error checking while providing proper
error accumulation.
Use mipi_dsi_msleep() and mipi_dsi_usleep_range() macros for delays.
Replace mdelay(10) and mdelay(20) with mipi_dsi_usleep_range() calls
using tighter slop (10-11ms and 20-21ms respectively) since these
functions aren't run often and don't need large timing windows.
In jdi_panel_off(), reset the error context between display_off and
enter_sleep_mode to preserve the original behavior of continuing power-down
even if display_off fails. This ensures enter_sleep_mode executes before
GPIO/regulator control, which is critical for proper power sequencing.
Signed-off-by: Chintan Patel <chintanlike@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260203044605.5890-1-chintanlike@gmail.com
A couple small changes:
- Validate the magic value at the head of FWCCB commands, and
- Mask off the magic value before logging unknown command types to make
them easier to interpret on sight.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Link: https://patch.msgid.link/20260206-improve-bad-fwccb-cmd-v1-1-831a852ca127@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The vc4 driver relies on a drm_private_obj, that is initialized by
allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-14-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The MSM dpu1 driver relies on a drm_private_obj, that is initialized by
allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-11-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The MSM mdp5 driver relies on a drm_private_obj, that is initialized by
allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-10-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The ingenic driver relies on two drm_private_objs, that are initialized
by allocating and initializing a state, and then passing it to
drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-9-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The ARM komeda driver relies on a number of drm_private_objs, that are
initialized by allocating and initializing a state, and then passing it
to drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-8-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The DP tunnel implementation relies on a drm_private_obj, that is
initialized by allocating and initializing a state, and then passing it
to drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-6-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The DP MST implementation relies on a drm_private_obj, that is
initialized by allocating and initializing a state, and then passing it
to drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-5-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The bridge implementation relies on a drm_private_obj, that is
initialized by allocating and initializing a state, and then passing it
to drm_private_obj_init.
Since we're gradually moving away from that pattern to the more
established one relying on a atomic_create_state implementation, let's
migrate this instance to the new pattern.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-4-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Now that we have an atomic_create_state callback for drm_private_objs,
we can provide a helper for it.
It's somewhat different from the other similar helpers though, because
we definitely expect drm_private_obj to be subclassed. It wouldn't make
sense for a driver to use it as-is.
So we can't provide a straight implementation of the atomic_create_state
callback, but rather we provide the parts that will deal with the
drm_private_obj initialization, and we will leave the allocation and
initialization of the subclass to drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-3-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_private_obj initialization was inconsistent with the rest of the
KMS objects. Indeed, it required to pass a preallocated state in
drm_private_obj_init(), while all the others objects would have a reset
callback that would be called later on to create the state.
However, reset really is meant to reset the hardware and software state.
That it creates an initial state is a side-effect that has been used in
all objects but drm_private_obj. This is made more complex since some
drm_private_obj, the DisplayPort ones in particular, need to be
persistent across and suspend/resume cycle, and such a cycle would call
drm_mode_config_reset().
Thus, we need to add a new callback to allocate a pristine state for a
given private object.
This discussion has also came up during the atomic state readout
discussion, so it might be introduced into the other objects later on.
Until all drivers are converted to that new allocation pattern, we will
only call it if the passed state is NULL. This will be removed
eventually.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-2-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Since we're going to move the drm_private_obj state allocation to a
callback, we need to be able to deal with its possible failure.
Make drm_private_obj_init return an error code on failure.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-1-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The plane color pipeline initialization built up multiple colorop blocks
inline, but did not reliably clean up partially constructed pipelines
when an intermediate step failed. This could lead to leaked colorop
objects and fragile error handling as the pipeline grows.
Refactor the pipeline construction to use a common helper for adding
colorop blocks. This centralizes allocation, initialization, and
teardown logic, allowing the caller to reliably unwind all previously
created colorops on failure.
v2:
- Refactor code to avoid repetition (Suraj)
v3:
- s/nvl/xe3plpd (Suraj)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-10-chaitanya.kumar.borah@intel.com
Switch drm_colorop_pipeline_destroy() to use the driver-provided
destroy callback instead of directly calling drm_colorop_cleanup()
and freeing the object.
This allows drivers that embed struct drm_colorop in driver-specific
objects to perform correct teardown.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-9-chaitanya.kumar.borah@intel.com
Now that colorops are cleaned from drm_mode_config_cleanup(), remove
drm_colorop_pipeline_destroy() from vkms_destroy().
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-8-chaitanya.kumar.borah@intel.com
Tear down all registered drm_colorop objects during
drm_mode_config_cleanup() by invoking their destroy callbacks.
This ensures proper cleanup of color pipeline objects during DRM device
removal.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-7-chaitanya.kumar.borah@intel.com
i915 embeds struct drm_colorop inside struct intel_colorop, so the
default drm_colorop_destroy() helper cannot be used. Add an
intel_colorop_destroy() helper that performs common DRM cleanup and
frees intel_colorop object.
This ensures correct teardown of plane color pipeline objects.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-6-chaitanya.kumar.borah@intel.com
Provide a drm_colorop_funcs instance for vkms color pipeline
objects and hook up the common drm_colorop_destroy() helper as the
destroy callback.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-5-chaitanya.kumar.borah@intel.com
Provide a drm_colorop_funcs instance for amdgpu_dm color pipeline
objects and hook up the common drm_colorop_destroy() helper as the
destroy callback.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-4-chaitanya.kumar.borah@intel.com
Some drivers might want to embed struct drm_colorop inside
driver-specific objects, similar to planes or CRTCs. In such
cases, freeing only the drm_colorop is incorrect.
Add a drm_colorop_funcs callback to allow drivers to provide a destroy
hook that cleans up the full enclosing object. Make changes in helper
functions to accept helper functions as argument. Pass NULL for now
to retain current behavior.
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-3-chaitanya.kumar.borah@intel.com
Add a helper that performs common cleanup and frees the
associated object. This can be used by drivers if they do not
require any driver-specific teardown.
v2:
- Add function documentation only before definition (Jani)
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260202094202.2871478-2-chaitanya.kumar.borah@intel.com
__rcu annotations on the return types from dma_fence_driver_name() and
dma_fence_timeline_name() cause sparse to complain because both the
constant signaled strings, and the strings return by the dma_fence_ops are
not __rcu annotated.
For a simple fix it is easiest to cast them with __rcu added and undo the
smarts from the tracpoints side of things. There is no functional change
since the rest is left in place. Later we can consider changing the
dma_fence_ops return types too, and handle all the individual drivers
which define them.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 506aa8b02a ("dma-fence: Add safe access helpers and document the rules")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506162214.1eA69hLe-lkp@intel.com/
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250616155952.24259-1-tvrtko.ursulin@igalia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Although it's generally expected that the pixel clock ID will only have
one decimal digit, this isn't enforced in vs_dc.c source code, and the
compiler will argue about the buffer being not long enough.
Enlarge the snprintf() buffer for generating pixel clock name to be
enough for a UINT_MAX pixel clock ID in order to suppress the compiler
warning.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602060154.ONBYvM9m-lkp@intel.com/
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260207013255.2075294-1-zhengxingda@iscas.ac.cn
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251030162043.292468-4-marco.crivellari@suse.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251030162043.292468-3-marco.crivellari@suse.com
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251030162043.292468-2-marco.crivellari@suse.com
drm_gem_objects_lookup() can allocate the output array and take
references on GEM objects before it fails.
If an error happens part-way through, callers previously had to clean up
partially created results themselves. This relied on subtle and
undocumented behavior and was easy to get wrong.
Make drm_gem_objects_lookup() clean up on failure. The function now
drops any references it already took, frees the array, and sets
*objs_out to NULL before returning an error.
On success, behavior is unchanged. Existing callers remain correct and
their error cleanup paths simply do nothing when *objs_out is NULL.
v2/v3: Move partial-lookup cleanup into objects_lookup(), perform
reference dropping outside the lock, and remove reliance on __GFP_ZERO
or implicit NULL handling. (Christian)
v4: Use goto-style error handling in objects_lookup(), drop partial
references outside the lock, and simplify drm_gem_objects_lookup()
cleanup by routing failures through err_free_handles as suggested.
(Christian)
v5: Rebase on drm-misc-next, drop the ret local variable. (Christian)
v6: Drop superfluous initialization of handles. (Christian/Tvrtko)
Cc: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260206132141.1474191-1-srinivasan.shanmugam@amd.com
Swapping the data role requires sending the message to the other USB-C
side. Implement sending these messages through the OCM. The code is
largely based on the anx7411.c USB-C driver.
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Link: https://patch.msgid.link/20260121-anx7625-typec-v2-3-d14f31256a17@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
ANX7625 can be used as a USB-C controller, handling USB and DP data
streams. Provide minimal Type-C support necessary for ANX7625 to
register the Type-C port device and properly respond to data / power
role events from the Type-C partner.
While ANX7625 provides TCPCI interface, using it would circumvent the
on-chip running firmware. Analogix recommended using the higher-level
interface instead of TCPCI.
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260121-anx7625-typec-v2-2-d14f31256a17@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
ANX7625 can be used to mux converted video stream with the USB signals
on a Type-C connector. Describe the optional connector subnode, make it
exclusive with the AUX bus and port@1 as it is impossible to have both
eDP panel and USB-C connector.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260121-anx7625-typec-v2-1-d14f31256a17@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
This helper handles the attaching and linking of the entire list of power
domains. Besides making pvr_power_domains_init() simpler, this also lays
the groundwork to simplify supporting the varied power domain names used in
Volcanic GPU cores.
Note that we still need to create the links between power domains to ensure
they're brought up in a valid sequence.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260123-pm-domain-attach-list-v1-1-d51dd7e43253@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Remove the internal DRM client from fbdev emulation. This has been
required when some DRM drivers provided their own fbdev emulation.
This is no longer the case with commit b55f3bbab8 ("drm/{i915, xe}:
Implement fbdev emulation as in-kernel client") from 2024. Now there's
only a single DRM client for fbdev-emulation that fills out the client
callback functions as required.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260205144056.416759-1-tzimmermann@suse.de
Only DRM clients for fbdev emulation invoke fbdev helpers. Hence remove
the empty placeholders for non-fbdev builds, as they are unused.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260205141142.412048-1-tzimmermann@suse.de
This was leftover from when I dropped it in
4a9671a03f ("gpu: Move DRM buddy allocator one level up (part one)")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move the DRM buddy allocator one level up so that it can be used by GPU
drivers (example, nova-core) that have usecases other than DRM (such as
VFIO vGPU support). Modify the API, structures and Kconfigs to use
"gpu_buddy" terminology. Adapt the drivers and tests to use the new API.
The commit cannot be split due to bisectability, however no functional
change is intended. Verified by running K-UNIT tests and build tested
various configurations.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
[airlied: I've split this into two so git can find copies easier.
I've also just nuked drm_random library, that stuff needs to be done
elsewhere and only the buddy tests seem to be using it].
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move the DRM buddy allocator one level up so that it can be used by GPU
drivers (example, nova-core) that have usecases other than DRM (such as
VFIO vGPU support). Modify the API, structures and Kconfigs to use
"gpu_buddy" terminology. Adapt the drivers and tests to use the new API.
The commit cannot be split due to bisectability, however no functional
change is intended. Verified by running K-UNIT tests and build tested
various configurations.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
[airlied: I've split this into two so git can find copies easier.
I've also just nuked drm_random library, that stuff needs to be done
elsewhere and only the buddy tests seem to be using it].
Signed-off-by: Dave Airlie <airlied@redhat.com>
The AFBC framebuffer size validation calculates the minimum required
buffer size by adding the AFBC payload size to the framebuffer offset.
This addition is performed without checking for integer overflow.
If the addition oveflows, the size check may incorrectly succed and
allow userspace to provide an undersized drm_gem_object, potentially
leading to out-of-bounds memory access.
Add usage of check_add_overflow() to safely compute the minimum
required size and reject the framebuffer if an overflow is detected.
This makes the AFBC size validation more robust against malformed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 65ad2392dd ("drm/komeda: Added AFBC support for komeda driver")
Signed-off-by: Alexander Konyukhov <Alexander.Konyukhov@kaspersky.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20260203134907.1587067-1-Alexander.Konyukhov@kaspersky.com
Some driver use fence->ops to test if a fence was initialized or not.
The problem is that this utilizes internal behavior of the dma_fence
implementation.
So better abstract that into a function.
v2: use a flag instead of testing fence->ops, rename the function, move
to the beginning of the patch set.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20260120105655.7134-2-christian.koenig@amd.com
T-Head TH1520 SoC contains a Synopsys DesignWare HDMI controller (paired
with DesignWare HDMI TX PHY Gen2) that takes the "DP" output from the
display controller.
Add a driver for this controller utilizing the common DesignWare HDMI
code in the kernel.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-6-zhengxingda@iscas.ac.cn
T-Head TH1520 SoC contains a Synopsys DesignWare HDMI controller paired
with DesignWare HDMI PHY, with an extra clock gate for HDMI pixel clock
and two reset controls.
Add a device tree binding to it.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-5-zhengxingda@iscas.ac.cn
This is a from-scratch driver targeting Verisilicon DC-series display
controllers, which feature self-identification functionality like their
GC-series GPUs.
Only DC8200 is being supported now, and only the main framebuffer is set
up (as the DRM primary plane). Support for more DC models and more
features is my further targets.
As the display controller is delivered to SoC vendors as a whole part,
this driver does not use component framework and extra bridges inside a
SoC is expected to be implemented as dedicated bridges (this driver
properly supports bridge chaining).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-4-zhengxingda@iscas.ac.cn
