[Why]
The vram width value is 0.
Because the integratedsysteminfo table in VBIOS has updated to 2.3.
[How]
Driver needs a new intergrated info v2.3 table too.
Then the vram width value will be correct.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Small APUs(i.e., consumer, embedded products) usually have a small
carveout device memory which can't satisfy most compute workloads
memory allocation requirements.
We can't even run a Basic MNIST Example with a default 512MB carveout.
https://github.com/pytorch/examples/tree/main/mnist. Error Log:
"torch.cuda.OutOfMemoryError: HIP out of memory. Tried to allocate
84.00 MiB. GPU 0 has a total capacity of 512.00 MiB of which 0 bytes
is free. Of the allocated memory 103.83 MiB is allocated by PyTorch,
and 22.17 MiB is reserved by PyTorch but unallocated"
Though we can change BIOS settings to enlarge carveout size,
which is inflexible and may bring complaint. On the other hand,
the memory resource can't be effectively used between host and device.
The solution is MI300A approach, i.e., let VRAM allocations go to GTT.
Then device and host can flexibly and effectively share memory resource.
v2: Report local_mem_size_private as 0. (Felix)
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate cleared blocks in the bias range when the DRM
buddy's clear avail is zero. This will validate the bias
range allocation in scenarios like system boot when no
cleared blocks are available and exercise the fallback
path too. The resulting blocks should always be dirty.
v1:(Matthew)
- move the size to the variable declaration section.
- move the mm.clear_avail init to allocator init.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-2-Arunpravin.PaneerSelvam@amd.com
Problem statement: During the system boot time, an application request
for the bulk volume of cleared range bias memory when the clear_avail
is zero, we dont fallback into normal allocation method as we had an
unnecessary clear_avail check which prevents the fallback method leads
to fb allocation failure following system goes into unresponsive state.
Solution: Remove the unnecessary clear_avail check in the range bias
allocation function.
v2: add a kunit for this corner case (Daniel Vetter)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Fixes: 96950929eb ("drm/buddy: Implement tracking clear page feature")
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240514145636.16253-1-Arunpravin.PaneerSelvam@amd.com
We need to undo what was done in panthor_sched_pre_reset() even if the
reset failed. We just flag all previously running groups as terminated
when that happens to unblock things.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502183813.1612017-5-boris.brezillon@collabora.com
Make sure the user is aware that drm_panthor_tiler_heap_destroy::handle
must be a handle previously returned by
DRM_IOCTL_PANTHOR_TILER_HEAP_CREATE.
v4:
- Add Steve's R-b
v3:
- New patch
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-6-boris.brezillon@collabora.com
The heap ID is used to index the heap context pool, and allocating
in the [1:MAX_HEAPS_PER_POOL] leads to an off-by-one. This was
originally to avoid returning a zero heap handle, but given the handle
is formed with (vm_id << 16) | heap_id, with vm_id > 0, we already can't
end up with a valid heap handle that's zero.
v4:
- s/XA_FLAGS_ALLOC1/XA_FLAGS_ALLOC/
v3:
- Allocate in the [0:MAX_HEAPS_PER_POOL-1] range
v2:
- New patch
Fixes: 9cca48fa4f ("drm/panthor: Add the heap logical block")
Reported-by: Eric Smith <eric.smith@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Eric Smith <eric.smith@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-5-boris.brezillon@collabora.com
The field used to store the chunk size if 12 bits wide, and the encoding
is chunk_size = chunk_header.chunk_size << 12, which gives us a
theoretical [4k:8M] range. This range is further limited by
implementation constraints, and all known implementations seem to
impose a [128k:8M] range, so do the same here.
We also relax the power-of-two constraint, which doesn't seem to
exist on v10. This will allow userspace to fine-tune initial/max
tiler memory on memory-constrained devices.
v4:
- Actually fix the range in the kerneldoc
v3:
- Add R-bs
- Fix valid range in the kerneldoc
v2:
- Turn the power-of-two constraint into a page-aligned constraint to allow
fine-tune of the initial/max heap memory size
- Fix the panthor_heap_create() kerneldoc
Fixes: 9cca48fa4f ("drm/panthor: Add the heap logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-4-boris.brezillon@collabora.com
It doesn't make sense to have a maximum number of chunks smaller than
the initial number of chunks attached to the context.
Fix the uAPI header to reflect the new constraint, and mention the
undocumented "initial_chunk_count > 0" constraint while at it.
v3:
- Add R-b
v2:
- Fix the check
Fixes: 9cca48fa4f ("drm/panthor: Add the heap logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-3-boris.brezillon@collabora.com
If the kernel couldn't allocate memory because we reached the maximum
number of chunks but no render passes are in flight
(panthor_heap_grow() returning -ENOMEM), we should defer the OOM
handling to the FW by returning a NULL chunk. The FW will then call
the tiler OOM exception handler, which is supposed to implement
incremental rendering (execute an intermediate fragment job to flush
the pending primitives, release the tiler memory that was used to
store those primitives, and start over from where it stopped).
Instead of checking for both ENOMEM and EBUSY, make panthor_heap_grow()
return ENOMEM no matter the reason of this allocation failure, the FW
doesn't care anyway.
v3:
- Add R-bs
v2:
- Make panthor_heap_grow() return -ENOMEM for all kind of allocation
failures
- Document the panthor_heap_grow() semantics
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Antonino Maniscalco <antonino.maniscalco@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502165158.1458959-2-boris.brezillon@collabora.com
- Use ordered WQ for G2H handler. (Matthew Brost)
- Use flexible-array rather than zero-sized (Lucas De Marchi)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZjz6vwAKCRC4FpNVCsYG
vybvAP4tAOoYsRW35Vb6T7CYMvYVdrp7SywBsWbiFk+KtR6q9AEAhwTEG1Z1sH3e
9yIkcpfTo0O1ARxhN/EFsJQ+OtO4OQE=
=kdLI
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-fixes-2024-05-09-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Use ordered WQ for G2H handler. (Matthew Brost)
- Use flexible-array rather than zero-sized (Lucas De Marchi)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zjz7SzCvfA3vQRxu@fedora
Updates for v6.10
Core:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings (no driver changes, using SM8350
as a fallback compat)
GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtpw6dNR9JBikFTQ=TCpt-9FeFW+SGjXWv+Jv3emm0Pbg@mail.gmail.com
System work queues are shared, use a dedicated work queue for G2H
processing to avoid G2H processing getting block behind system tasks.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506034758.3697397-1-matthew.brost@intel.com
(cherry picked from commit 50aec9665e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
We don't need to run the validation of the XML files if we are just
compiling the kernel. Skip the validation unless the user enables
corresponding Kconfig option. This removes a warning from gen_header.py
about lxml being not installed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240409120108.2303d0bd@canb.auug.org.au/
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/592558/
Signed-off-by: Rob Clark <robdclark@chromium.org>
These tables were made non-const in commit 3cba4a2cdf ("drm/msm/a6xx:
Update ROQ size in coredump") in order to avoid powering up the GPU when
reading back a devcoredump. Instead let's just stash the count that is
potentially read from hw in struct a6xx_gpu_state_obj, and make the
tables const again.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/592699/
Import from kgsl commit 809ee24fe560.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/592516/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add myself as a reviewer for Adreno driver changes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590705/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The msm driver is.. gigantic and covers display hardware (incl. things
concerning (e)DP, DSI, HDMI), as well as the entire lineup of Adreno
GPUs (with hw bringup, memory mappings, userspace interaction etc.).
Because of that, people listed as M:/R: receive patches concerning
drivers for any part of the display block OR the GPU. Separate the
latter, as it's both a functionally separate block and is of
interest to different folks.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/590704/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Calling a6xx_destroy() before adreno_gpu_init() leads to a null pointer
dereference on:
msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL);
as gpu->pdev is only assigned in:
a6xx_gpu_init()
|_ adreno_gpu_init
|_ msm_gpu_init()
Instead of relying on handwavy null checks down the cleanup chain,
explicitly de-allocate the LLC data and free a6xx_gpu instead.
Fixes: 76efc2453d ("drm/msm/gpu: Fix crash during system suspend after unbind")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/588919/
Signed-off-by: Rob Clark <robdclark@chromium.org>
a7xx_submit() should use the a7xx variant of the RBBM_PERFCTR_CP register
for retrieving the CP cycles value before and after the submitted command
stream execution.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Patchwork: https://patchwork.freedesktop.org/patch/588445/
Signed-off-by: Rob Clark <robdclark@chromium.org>
In addition to the CP_PERFCTR_CP_SEL register range, allow writes to the
CP_BV_PERFCTR_CP_SEL registers in the 0x8e0-0x8e6 range for profiling
purposes of tools like fdperf and perfetto.
Signed-off-by: Zan Dobersek <zdobersek@igalia.com>
Patchwork: https://patchwork.freedesktop.org/patch/580548/
[fixup a730_protect size]
Signed-off-by: Rob Clark <robdclark@chromium.org>
- Fix for a backmerge going slightly wrong.
- An UAF fix
- Avoid a WA error on LNL.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZjOh4wAKCRC4FpNVCsYG
v4TfAP9ngQQrvAvNm6Gp8oWVzdqt3Q2uswvDIwfQXylb9dJcJwEAyRwpyEclhIkN
xrsHdNTSH0fnC9xzxPjUddGyQokzRQs=
=VGIW
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-fixes-2024-05-02' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix for a backmerge going slightly wrong.
- An UAF fix
- Avoid a WA error on LNL.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZjOijQA43zhu3SZ4@fedora
This reverts commit 8a91b29f1f.
The regulator_disable() added by the original commit solves one kind of
regulator imbalance but adds another one as it allows the regulator to be
disabled one more time than it is enabled in the following scenario:
1. Start video pipeline -> sn65dsi83_atomic_pre_enable -> regulator_enable
2. PLL lock fails -> regulator_disable
3. Stop video pipeline -> sn65dsi83_atomic_disable -> regulator_disable
The reason is clear from the code flow, which looks like this (after
removing unrelated code):
static void sn65dsi83_atomic_pre_enable()
{
regulator_enable(ctx->vcc);
if (PLL failed locking) {
regulator_disable(ctx->vcc); <---- added by patch being reverted
return;
}
}
static void sn65dsi83_atomic_disable()
{
regulator_disable(ctx->vcc);
}
The use case for introducing the additional regulator_disable() was
removing the module for debugging (see link below for the discussion). If
the module is removed after a .atomic_pre_enable, i.e. with an active
pipeline from the DRM point of view, .atomic_disable is not called and thus
the regulator would not be disabled.
According to the discussion however there is no actual use case for
removing the module with an active pipeline, except for
debugging/development.
On the other hand, the occurrence of a PLL lock failure is possible due to
any physical reason (e.g. a temporary hardware failure for electrical
reasons) so handling it gracefully should be supported. As there is no way
for .atomic[_pre]_enable to report an error to the core, the only clean way
to support it is calling regulator_disabled() only in .atomic_disable,
unconditionally, as it was before.
Link: https://lore.kernel.org/all/15244220.uLZWGnKmhe@steina-w/
Fixes: 8a91b29f1f ("drm/bridge: ti-sn65dsi83: Fix enable error path")
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426122259.46808-1-luca.ceresoli@bootlin.com
(cherry picked from commit 2940ee03b2)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
plane->state and plane->state->fb can be NULL, so add a check before
dereferencing them.
Found by testing with the imx driver.
Fixes: 879b3b6511 ("drm/fb_dma: Add generic get_scanout_buffer() for drm_panic")
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426121121.241366-1-jfalempe@redhat.com
(cherry picked from commit 986c12d8c9)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Framebuffer memory is allocated via vzalloc() from non-contiguous
physical pages. The physical framebuffer start address is therefore
meaningless. Do not set it.
The value is not used within the kernel and only exported to userspace
on dedicated ARM configs. No functional change is expected.
v2:
- refer to vzalloc() in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: a5b44c4adb ("drm/fbdev-generic: Always use shadow buffering")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: <stable@vger.kernel.org> # v6.4+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Tested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419083331.7761-2-tzimmermann@suse.de
(cherry picked from commit 73ef0aecba)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
In the post_reset function, if the fast reset didn't succeed, we
are not clearing the fast_reset flag, which prevents firmware
sections from being reloaded. While at it, use panthor_fw_stop()
instead of manually writing DISABLE to the MCU_CONTROL register.
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430113727.493155-1-boris.brezillon@collabora.com
When we check for state values returned by the FW, we only cover part of
the 0:7 range. Make sure we catch FW inconsistencies by adding a default
to the switch statement, and flagging the group state as unknown in that
case.
When an unknown state is detected, we trigger a reset, and consider the
group as unusable after that point, to prevent the potential corruption
from creeping in other places if we continue executing stuff on this
context.
v2:
- Add Steve's R-b
- Fix commit message
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/3b7fd2f2-679e-440c-81cd-42fc2573b515@moroto.mountain/T/#u
Suggested-by: Steven Price <steven.price@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240502155248.1430582-1-boris.brezillon@collabora.com
When you create a submenu using the 'menu' syntax, there is no
ambiguity about its end because the code between 'menu' and 'endmenu'
becomes the submenu.
In contrast, 'menuconfig' does not have the corresponding end marker.
Instead, the end of the submenu is inferred from symbol dependencies.
This is detailed in Documentation/kbuild/kconfig-language.rst, starting
line 348. It outlines two methods to place the code under the submenu:
(1) Open an if-block immediately after 'menuconfig', enclosing the
submenu content within it
(2) Add 'depends on' to every symbol intended for the submenu
Many subsystems opt for (1) because it reliably maintains the submenu
structure.
The DRM subsystem adopts (2). The submenu ends when the sequence of
'depends on DRM' breaks. It can be confirmed by running a GUI frontend
such as 'make menuconfig' and visiting the DRM menu:
< > Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ----
If you toggle this, you will notice most of the DRM-related options
appear below it, not in the submenu.
I highly recommend the approach (1). Obviously, (2) is not reliable,
as the submenu breaks whenever someone forgets to add 'depends on DRM'.
This commit encloses the entire DRM configuration with 'if DRM' and
'endif', except for DRM_PANEL_ORIENTATION_QUIRKS.
Note:
Now, 'depends on DRM' properties inside the if-block are all redundant.
I leave it as follow-up cleanups.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426135602.2500125-1-masahiroy@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit d674858ff9, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/3db958e3f4002e26cd963596d810c37feb315fb3.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit c0e0f13935, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/bd93d43b07f8ed6368119f4a5ddac2ee80debe53.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit e075e496f5, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1ba76cc4d96a8afefff5d1bc42fb1e1329c5da68.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit 4d15125d7f, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79824fec01eb9ab0673b9409f9b39cc8b5cc338d.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
This reverts commit 0323287de8, as helper
code should always be selected by the driver that needs it, for the
convenience of the final user configuring a kernel.
The user who configures a kernel should not need to know which helpers
are needed for the driver he is interested in. Making a driver depend
on helper code means that the user needs to know which helpers to enable
first, which is very user-unfriendly.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/89ac456805746b6d0c888f10c5120b11aacd3319.1713780345.git.geert+renesas@glider.be
Signed-off-by: Maxime Ripard <mripard@kernel.org>
