The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/sm8150-mtp.dtb: hwlock: 'reg' is a required property
qcom/sm8150-mtp.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-17-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-16-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'reg' is a required property
qcom/sdm636-sony-xperia-ganges-mermaid.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-15-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-14-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/qcs404-evb-4000.dtb: hwlock: 'reg' is a required property
qcom/qcs404-evb-4000.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-13-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/sdm845-shift-axolotl.dtb: hwlock: 'reg' is a required property
qcom/sdm845-shift-axolotl.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-12-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-11-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
This also describes more accurately the devices and their IO address
space, and allows to remove incorrect syscon compatible from TCSR mutex:
qcom/sc7280-herobrine-crd.dtb: hwlock@1f40000: compatible: ['qcom,tcsr-mutex', 'syscon'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-10-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'reg' is a required property
qcom/sc7180-trogdor-wormdingler-rev1-inx.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-9-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-8-krzysztof.kozlowski@linaro.org
TCSR syscon node should come with dedicated compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-7-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/msm8998-asus-novago-tp370ql.dtb: hwlock: 'reg' is a required property
qcom/msm8998-asus-novago-tp370ql.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-6-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-5-krzysztof.kozlowski@linaro.org
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap). This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:
qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'reg' is a required property
qcom/msm8996-xiaomi-natrium.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-4-krzysztof.kozlowski@linaro.org
The TCSR halt regs are next to TCSR mutex (in one address block called
TCSR_MUTEX), so before converting the TCSR mutex into device with
address space, we need to split the halt regs to its own syscon device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220819083209.50844-3-krzysztof.kozlowski@linaro.org
reg_vdd_tsp: regulator-vdd-tsp is actually used as an analog regulator for
touchscreen on all of a2015 and e2015 devices.
Rename it into reg_vdd_tsp_a: regulator-vdd-tsp-a to reduce confusion.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724095438.14252-1-linmengbo0689@protonmail.com
On the Samsung Galaxy E5 and E7 the touch key is supplied by a single
fixed regulator (enabled via GPIO 97) that supplies both MCU and LED.
Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724095426.14189-1-linmengbo0689@protonmail.com
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy E5/E7/Grand Max device trees from the
arm64 tree together with the ARM32 include to allow booting this device on
ARM32.
The approach to include device tree files from other architectures is
inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
used to build the device tree for both ARM32 and ARM64.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724095413.14135-1-linmengbo0689@protonmail.com
Samsung Galaxy E5, E7 and Grand Max are smartphones using the MSM8916 SoC
released in 2015.
e2015 and a2015 are similar, with some differences in accelerometer,
MUIC and Vibrator. The common parts are shared in
msm8916-samsung-a2015-common.dtsi to reduce duplication.
Add a common device tree for with initial support for:
- GPIO keys
- GPIO LEDs for Grand Max
- Regulator haptic
- Hall sensor (except Grand Max)
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5504 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- S3FWRN5 NFC (except Grand Max)
The three devices (and all other variants of E5/E7/Grand Max released in
2015) are very similar, with some differences in display, touchscreen,
sensors and NFC. The common parts are shared in
msm8916-samsung-e2015-common.dtsi to reduce duplication.
Unfortunately, some E5/E7/Grand Max were released with outdated 32-bit
only firmware and never received any update from Samsung. Since the 32-bit
TrustZone firmware is signed there seems to be no way currently to
actually boot this device tree on arm64 Linux on those variants at the
moment.
However, it is possible to use this device tree by compiling an ARM32
kernel instead. The device tree can be easily built on ARM32 with
an #include and it works really well there. To avoid confusion for others
it is still better to add this device tree on arm64. Otherwise it's easy
to forget to update this one when making some changes that affect all
MSM8916 devices.
Maybe someone finds a way to boot ARM64 Linux on those device at some
point. In this case I expect that this device tree can be simply used
as-is.
Co-developed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724095400.14081-1-linmengbo0689@protonmail.com
Document the new samsung,e5/e7/grandmax device tree bindings used in their
device trees.
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220724095346.14022-1-linmengbo0689@protonmail.com
The difference between sku6 and sku4 is that there is no esim
The different SKUs are:
LTE with physical SIM _and_ eSIM
LTE with only a physical SIM
WiFi only
Both sku4 and sku6 are LTE SKUs.
One has the eSIM stuffed and one doesn't.
There is a single shared device tree for the two.
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220721033918.v3.2.I7ecbb7eeb58c5e6a33e32a3abf4d6874e6cb725c@changeid
Add support for Sony Xperia 1 IV, a.k.a PDX223. This device is a part
of the SoMC SM8450 Nagara platform and currently it is the only
device based on that board, so no -common DTSI is created until (if?)
other Nagara devices appear.
This commit brings support for:
* SD Card
* USB (*including SuperSpeed*)
* ADSP/CDSP/SLPI (modem remains untested for now)
* Most regulators (some GPIO-enabled ones require PMIC GPIOs but
trying to access any SPMI device crashes the device..)
* Part of I2C-connected peripherals (notably no touch due to a
driver bug)
* PCIe0 (PCIe1 is unused)
Do note display via simplefb is not supported, as the display is blanked
upon exiting XBL.
To create a working boot image, you need to run:
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8450-sony-xperia-\
nagara-pdx223.dtb > .Image.gz-dtb
mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 1 \
--os_version 12 \
--os_patch_level 2022-06 \ # or newer
-o boot.img-sony-xperia-pdx223
Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:
// You have to either pull vbmeta{"","_system"} from
// /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system \
vbmeta_system.img
fastboot flash boot boot.img-sony-xperia-pdx223
fastboot erase vendor_boot
fastboot erase recovery
fastboot flash dtbo emptydtbo.img
fastboot reboot
Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714123406.1919836-5-konrad.dybcio@somainline.org
Add and configure the SDHCI host responsible for (mostly) SD Card and
its corresponding pins' sleep states.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714123406.1919836-4-konrad.dybcio@somainline.org
Fix up the camera region (cross-referenced different vendors' msm-5.10
drops, 9f500000 is the default location for SM8450) and reserve the
second chunk occupied by xbl_sc.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714123406.1919836-3-konrad.dybcio@somainline.org
Add a MSM8998-specific SDCC compatible, because using only a generic
qcom,sdhci-msm-v4 fallback is deprecated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220714091042.22287-3-krzysztof.kozlowski@linaro.org
The qcom,msm-id is an uint32 matrix, so a list of tuples.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220705130300.100882-4-krzysztof.kozlowski@linaro.org
As we are converting this platform to use DT clock bindings, add clocks
and clock-names properties to the MMCC device tree node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220704172453.838303-8-dmitry.baryshkov@linaro.org
Add all the different NoC providers that are found in SM6350 and
populate different nodes that use the interconnect properties.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220525144404.200390-6-luca.weiss@fairphone.com
Replace deprecated perst-gpio and wake-gpio properties with up-to-date
perst-gpios and wake-gpios in the Qualcomm device trees.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220506152107.1527552-9-dmitry.baryshkov@linaro.org
Qualcomm PCIe devices are not really compatible with the snps,dw-pcie.
Unlike the generic IP core, they have special requirements regarding
enabling clocks, toggling resets, using the PHY, etc.
This is not to mention that platform snps-dw-pcie driver expects to find
two IRQs declared, while Qualcomm platforms use just one.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220506152107.1527552-6-dmitry.baryshkov@linaro.org
Add support for the alternate (second-source) touchpad found on some
X13s laptops.
Note that alternate touchpad is kept disabled for now. The boot firmware
should determine which device is actually populated and enable only the
corresponding node.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-8-johan+linaro@kernel.org
The touchpad and keyboard can wake the system from suspend so declare
them as wakeup sources.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-7-johan+linaro@kernel.org
The HID pin configurations belong in the HID nodes rather than i2c bus
node.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-6-johan+linaro@kernel.org
The (optional) touchscreen interrupt line has an external pull-up so
disable the internal one as is done for the keyboard and touchpad.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-5-johan+linaro@kernel.org
The touchpad and keyboard can wake the system from suspend so declare
them as wakeup sources.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-4-johan+linaro@kernel.org
The HID pin configurations belong in the HID nodes rather than i2c bus
node.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-3-johan+linaro@kernel.org
The touchscreen interrupt line has an external pull-up so disable the
internal one as is done for the keyboard and touchpad.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220805092317.4985-2-johan+linaro@kernel.org
The SDM845 comes with few instances of Bandwidth Monitor. The already
supported one monitors traffic between CPU and Last Level Cache
Controller (LLCC) and in downstream sources is called BWMON v4 (or v4 of
register layout).
SDM845 also has also BWMON instance measuring traffic between LLCC and
memory with different register layout: called v5.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-12-krzysztof.kozlowski@linaro.org
The Last Level Cache Controller (LLCC) device does not need to access
entire LLCC address space. Currently driver uses only hardware info and
status registers which both reside in LLCC0_COMMON range (offset
0x30000, size 0x1000). Narrow the address space to allow binding other
drivers to rest of LLCC address space.
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Reported-by: Steev Klimaszewski <steev@kali.org>
Suggested-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220728113748.170548-11-krzysztof.kozlowski@linaro.org
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
somebody left NULL ->proc_lseek, became a practical issue now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYvlK4QAKCRBZ7Krx/gZQ
68EUAQDFUFhyvVLnhh1tAkPt3mxHT2OHASN8z6gRBjxGmqj53QD8D4EZAMy3XHnB
/6ajdD7hl5pxZQnECPqbBjzPYHa22QE=
=BNbv
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.
Fixes: 868941b144 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYvi0yQAKCRCAXGG7T9hj
vmikAQDWSrcWuxDkGnzut0A1tBQRUCWDMyKPqigWAA5tH2sPgAEAtWfBvT1xyl7T
gZ22I7o21WxxDGyvNUcA65pK7c2cpg8=
=UMbq
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- fix the handling of the "persistent grants" feature negotiation
between Xen blkfront and Xen blkback drivers
- a cleanup of xen.config and adding xen.config to Xen section in
MAINTAINERS
- support HVMOP_set_evtchn_upcall_vector, which is more compliant to
"normal" interrupt handling than the global callback used up to now
- further small cleanups
* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
xen: remove XEN_SCRUB_PAGES in xen.config
xen/pciback: Fix comment typo
xen/xenbus: fix return type in xenbus_file_read()
xen-blkfront: Apply 'feature_persistent' parameter when connect
xen-blkback: Apply 'feature_persistent' parameter when connect
xen-blkback: fix persistent grants negotiation
x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
- 'perf c2c' now supports ARM64, adjust its output to cope with differences with
what is in x86_64. Now go find false sharing on ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus reducing the
size of the resulting perf binary.
- Improvements for 'perf offcpu' profiling, including tracking child processes.
- Update Intel JSON metrics and events files for broadwellde, broadwellx,
cascadelakex, haswellx, icelakex, ivytown, jaketown, knightslanding,
sapphirerapids, skylakex and snowridgex.
- Add 'perf stat' JSON output and a 'perf test' entry for it.
- Ignore memfd and anonymous mmap events if jitdump present.
- Refactor 'perf test' shell tests allowing subdirs.
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of this merge window.
- Print debuginfod queries if -v option is used, to explain delays in processing when
debuginfo servers are enabled to fetch DSOs with richer symbol tables.
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection.
- Add PMU pai_crypto event description for IBM z16 on 'perf list'.
- Fix typos and duplicated words on comments in various places.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYvg1aQAKCRCyPKLppCJ+
J12hAQCCBXh+t7ab2PyXqDDwr/1aFc94nXA2A5wQ9N4MzD66YgEA1O34rxBiyetU
c1pStjrOqR6HGlXh+jAI4zTnK6w1wAs=
=m+oE
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
- 'perf c2c' now supports ARM64, adjust its output to cope with
differences with what is in x86_64. Now go find false sharing on
ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus
reducing the size of the resulting perf binary
- Improvements for 'perf offcpu' profiling, including tracking child
processes
- Update Intel JSON metrics and events files for broadwellde,
broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
knightslanding, sapphirerapids, skylakex and snowridgex
- Add 'perf stat' JSON output and a 'perf test' entry for it
- Ignore memfd and anonymous mmap events if jitdump present
- Refactor 'perf test' shell tests allowing subdirs
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of
this merge window
- Print debuginfod queries if -v option is used, to explain delays in
processing when debuginfo servers are enabled to fetch DSOs with
richer symbol tables
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection
- Add PMU pai_crypto event description for IBM z16 on 'perf list'
- Fix typos and duplicated words on comments in various places
* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
perf test: Refactor shell tests allowing subdirs
perf vendor events: Update events for snowridgex
perf vendor events: Update events and metrics for skylakex
perf vendor events: Update metrics for sapphirerapids
perf vendor events: Update events for knightslanding
perf vendor events: Update metrics for jaketown
perf vendor events: Update metrics for ivytown
perf vendor events: Update events and metrics for icelakex
perf vendor events: Update events and metrics for haswellx
perf vendor events: Update events and metrics for cascadelakex
perf vendor events: Update events and metrics for broadwellx
perf vendor events: Update metrics for broadwellde
perf jevents: Fold strings optimization
perf jevents: Compress the pmu_events_table
perf metrics: Copy entire pmu_event in find metric
perf pmu-events: Hide the pmu_events
perf pmu-events: Don't assume pmu_event is an array
perf pmu-events: Move test events/metrics to JSON
perf test: Use full metric resolution
perf pmu-events: Hide pmu_events_map
...
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit CPUs trap on it
rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some refactoring.
- A couple of other minor fixes.
Thanks to: Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej Mosnacek, Pali Rohár,
Russell Currey Segher Boessenkool.
-----BEGIN PGP SIGNATURE-----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=SpYx
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
CPUs trap on it rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some
refactoring.
- A couple of other minor fixes.
Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.
* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix build failure from uninitialised variable
powerpc/ppc-opcode: Fix PPC_RAW_TW()
powerpc64/ftrace: Fix ftrace for clang builds
powerpc: Make eh value more explicit when using lwarx
powerpc: Don't hide eh field of lwarx behind a macro
powerpc: Fix eh field when calling lwarx on PPC32
