For parallel exec queues, xe_exec_ioctl() copied the batch buffer address
array from userspace without checking num_batch_buffer.
If user creates a sync-only exec that doesn't use the address field, the
exec will fail with -EFAULT.
Add num_batch_buffer check to skip the copy, and the exec could be executed
successfully.
Here is the sync-only exec:
struct drm_xe_exec exec = {
.extensions = 0,
.exec_queue_id = qid,
.num_syncs = 1,
.syncs = (uintptr_t)&sync,
.address = 0, /* ignored for sync-only */
.num_batch_buffer = 0, /* sync-only */
};
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260122214053.3189366-2-shuicheng.lin@intel.com
(cherry picked from commit 4761791c1e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
CONFIG_DEVICE_PRIVATE is a prerequisite for DRM_XE_GPUSVM.
Explicitly select it so that DRM_XE_GPUSVM is not unintentionally
left out from distro configs not explicitly enabling
CONFIG_DEVICE_PRIVATE.
v2:
- Select also CONFIG_ZONE_DEVICE since it's needed by
CONFIG_DEVICE_PRIVATE.
v3:
- Depend on CONFIG_ZONE_DEVICE rather than selecting it.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260121091048.41371-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit 9386f49316)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
CONFIG_DEVICE_PRIVATE is not selected by default by some distros,
for example Fedora, and that leads to a regression in the xe driver
since userptr support gets compiled out.
It turns out that DRM_GPUSVM, which is needed for xe userptr support
compiles also without CONFIG_DEVICE_PRIVATE, but doesn't compile
without CONFIG_ZONE_DEVICE.
Exclude the drm_pagemap files from compilation with !CONFIG_ZONE_DEVICE,
and remove the CONFIG_DEVICE_PRIVATE dependency from CONFIG_DRM_GPUSVM and
the xe driver's selection of it, re-enabling xe userptr for those configs.
v2:
- Don't compile the drm_pagemap files unless CONFIG_ZONE_DEVICE is set.
- Adjust the drm_pagemap.h header accordingly.
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260121091048.41371-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 1e372b2461)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Previously, the driver's internal wedged.mode state was updated without
verifying whether the corresponding engine reset policy update in GuC
succeeded. This could leave the driver reporting a wedged.mode state
that doesn't match the actual reset behavior programmed in GuC.
With this change, the reset policy is updated first, and the driver's
wedged.mode state is modified only if the policy update succeeds on all
available GTs.
This patch also introduces two functional improvements:
- The policy is sent to GuC only when a change is required. An update
is needed only when entering or leaving XE_WEDGED_MODE_UPON_ANY_HANG,
because only in that case the reset policy changes. For example,
switching between XE_WEDGED_MODE_UPON_CRITICAL_ERROR and
XE_WEDGED_MODE_NEVER doesn't affect the reset policy, so there is no
need to send the same value to GuC.
- An inconsistent_reset flag is added to track cases where reset policy
update succeeds only on a subset of GTs. If such inconsistency is
detected, future wedged mode configuration will force a retry of the
reset policy update to restore a consistent state across all GTs.
Fixes: 6b8ef44cc0 ("drm/xe: Introduce the wedged_mode debugfs")
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patch.msgid.link/20260107174741.29163-3-lukasz.laguna@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 0f13dead4e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
We are meant to be checking the user vm for the bind queue, but actually
we are checking the migrate vm. For various reasons this is not
currently firing but this will likely change in the future.
Now that we have the user_vm attached to the bind queue, we can fix this
by directly checking that here.
Fixes: dba89840a9 ("drm/xe: Add GT TLB invalidation jobs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Arvind Yadav <arvind.yadav@intel.com>
Link: https://patch.msgid.link/20260120110609.77958-4-matthew.auld@intel.com
(cherry picked from commit 9dd1048bca)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Currently this is very broken if someone attempts to create a bind
queue and share it across multiple VMs. For example currently we assume
it is safe to acquire the user VM lock to protect some of the bind queue
state, but if allow sharing the bind queue with multiple VMs then this
quickly breaks down.
To fix this reject using a bind queue with any VM that is not the same
VM that was originally passed when creating the bind queue. This a uAPI
change, however this was more of an oversight on kernel side that we
didn't reject this, and expectation is that userspace shouldn't be using
bind queues in this way, so in theory this change should go unnoticed.
Based on a patch from Matt Brost.
v2 (Matt B):
- Hold the vm lock over queue create, to ensure it can't be closed as
we attach the user_vm to the queue.
- Make sure we actually check for NULL user_vm in destruction path.
v3:
- Fix error path handling.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Arvind Yadav <arvind.yadav@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patch.msgid.link/20260120110609.77958-3-matthew.auld@intel.com
(cherry picked from commit 9dd08fdecc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The timestamp WA does not work on a VF because it requires reading MMIO
registers, which are inaccessible on a VF. This timestamp WA confuses
LRC sampling on a VF during TDR, as the LRC timestamp would always read
as 1 for any active context. Disable the timestamp WA on VFs to avoid
this confusion.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 617d824c53 ("drm/xe: Add WA BB to capture active context utilization")
Link: https://patch.msgid.link/20260110012739.2888434-7-matthew.brost@intel.com
(cherry picked from commit efffd56e4b)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fix kernel-doc warnings on xe_vm_validation_exec():
Warning: ../drivers/gpu/drm/xe/xe_vm.h:392 expecting prototype for
xe_vm_set_validation_exec(). Prototype was for xe_vm_validation_exec()
instead
Fixes: 0131514f97 ("drm/xe: Pass down drm_exec context to validation")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260107155401.2379127-4-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit b3a7767989)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Workqueue xe-ggtt-wq has been allocated using WQ_MEM_RECLAIM, but
the flag has been passed as 3rd parameter (max_active) instead
of 2nd (flags) creating the workqueue as per-cpu with max_active = 8
(the WQ_MEM_RECLAIM value).
So change this by set WQ_MEM_RECLAIM as the 2nd parameter with a
default max_active.
Fixes: 60df57e496 ("drm/xe: Mark GGTT work queue with WQ_MEM_RECLAIM")
Cc: stable@vger.kernel.org
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260108180148.423062-1-marco.crivellari@suse.com
(cherry picked from commit aa39abc08e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Page accounting can change via the shrinker without calling
xe_ttm_tt_unpopulate(), which normally updates page count tracepoints
through update_global_total_pages. Add a call to
update_global_total_pages when the shrinker successfully shrinks a BO.
v2:
- Don't adjust global accounting when pinning (Stuart)
Cc: stable@vger.kernel.org
Fixes: ce3d39fae3 ("drm/xe/bo: add GPU memory trace points")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260107205732.2267541-1-matthew.brost@intel.com
(cherry picked from commit cc54eabdfb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
vmwgfx:
- Fix hw regression from refactoring cursor handling on v10 'hardware'
- Fix warnings in destructor by merging the 2 release functions
- kernel doc fix
- error handling in vmw_compat_shader_add()
rockchip:
- fix vop2 polling
- fix regression waiting for cfgdone without config change
- fix warning when enabling encoder
core:
- take gem lock when preallocating in gpuvm.
- add single byte read fallback to dp for broken usb-c adapters
- remove duplicate drm_sysfb declarations
gud:
- Fix oops on usb disconnect
Simple panel:
- Re-add fallback when connector is not set to fix regressions
- Set correct type in DataImage SCF0700C48GGU18
nouveau:
- locking fixes for cursor handling.
-----BEGIN PGP SIGNATURE-----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=Oc9s
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2026-01-16' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc6:
vmwgfx:
- Fix hw regression from refactoring cursor handling on v10 'hardware'
- Fix warnings in destructor by merging the 2 release functions
- kernel doc fix
- error handling in vmw_compat_shader_add()
rockchip:
- fix vop2 polling
- fix regression waiting for cfgdone without config change
- fix warning when enabling encoder
core:
- take gem lock when preallocating in gpuvm.
- add single byte read fallback to dp for broken usb-c adapters
- remove duplicate drm_sysfb declarations
gud:
- Fix oops on usb disconnect
Simple panel:
- Re-add fallback when connector is not set to fix regressions
- Set correct type in DataImage SCF0700C48GGU18
nouveau:
- locking fixes for cursor handling.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/ce0acfe2-9c1a-42b7-8782-f1e7f34b8544@linux.intel.com
[Why&How]
Right now, the HDMI HPD filter is enabled by default at 1500ms.
We want to disable it by default, as most modern displays with HDMI do
not require it for DPMS mode.
The HPD can instead be enabled as a driver parameter with a custom delay
value in ms (up to 5000ms).
Fixes: c918e75e1e ("drm/amd/display: Add an HPD filter for HDMI")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4859
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a681cd903)
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
Fixes: edc762a51c ("drm/amdgpu/userq: move some code around")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8e051e38a8)
Each queue of the process is individually removed and there is not need
to suspend whole mes. Suspending mes stops kernel mode queues also
causing unnecessary timeouts when running mixed work loads
Fixes: 079ae5118e ("drm/amdkfd: fix suspend/resume all calls in mes based eviction path")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4765
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3fd20580b9)
This reverts commit 820b3d376e.
It’s better to validate VM TLB flushes in the flush‑TLB backend
rather than in the generic VM layer.
Reverting this patch depends on
commit fa7c231fc2b0 ("drm/amdgpu: validate the flush_gpu_tlb_pasid()")
being present in the tree.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9163fe4d79)
Validate flush_gpu_tlb_pasid() availability before flushing tlb.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f4db9913e4)
resolving the issue of incorrect type definitions potentially causing calculation errors.
Fixes: 54f7f3ca98 ("drm/amdgpu/swm14: Update power limit logic")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e3a03d0ae1)
Internal backlight levels are initialised from ACPI but the values
are sometimes out of sync with the levels in effect until there has
been a read from hardware (eg triggered by reading from sysfs).
This means that the first drm_commit can cause the levels to be set
to a different value than the actual starting one, which results in
a sudden change in brightness.
This path shows the problem (when the values are out of sync):
amdgpu_dm_atomic_commit_tail()
-> amdgpu_dm_commit_streams()
-> amdgpu_dm_backlight_set_level(..., dm->brightness[n])
This patch calls the backlight ops get_brightness explicitly
at the end of backlight registration to make sure dm->brightness[n]
is in sync with the actual hardware levels.
Fixes: 2fe87f54ab ("drm/amd/display: Set default brightness according to ACPI")
Signed-off-by: Vivek Das Mohapatra <vivek@collabora.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 318b1c36d8)
Cc: stable@vger.kernel.org
[Why]
DP-HDMI dongles can execeed bandwidth requirements on high resolution
monitors. This can lead to pruning the high resolution modes.
HDMI 1.3 bumped the clock to 340MHz, but display code never matched it.
[How]
Set default to (DVI) 165MHz. Once HDMI display is identified update
to 340MHz.
Reported-by: Dianne Skoll <dianne@skoll.ca>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4780
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac1e65d8ad)
Cc: stable@vger.kernel.org
[Why]
The PSR message was moved in commit 4321742c39 ("drm/amd/display:
Move PSR support message into amdgpu_dm"). This message however shows
for every single link without showing which link is which. This can
send a confusing message to the user.
[How]
Add link name into the message.
Fixes: 4321742c39 ("drm/amd/display: Move PSR support message into amdgpu_dm")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99f77f6229)
If dqm->ops.initialize() fails, add deallocate_hiq_sdma_mqd()
to release the memory allocated by allocate_hiq_sdma_mqd().
Move deallocate_hiq_sdma_mqd() up to ensure proper function
visibility at the point of use.
Fixes: 11614c36bc ("drm/amdkfd: Allocate MQD trunk for HIQ and SDMA")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7cccc8286)
Cc: stable@vger.kernel.org
These IOCTLs shouldn't be called when userqs are not
enabled. Make sure they are enabled before executing
the IOCTLs.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d967509651)
Cc: stable@vger.kernel.org
This reverts commit 22a36e660d once,
which was merged twice due to an incorrect backmerge resolution.
Fixes: ce0478b02e ("Merge tag 'v6.18-rc6' into drm-next")
Signed-off-by: Peter Colberg <pcolberg@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 38a0f4cf8c)
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a23e7b433)
Cc: stable@vger.kernel.org
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
Fixes: fe151ed7af ("drm/amdgpu: add generic display panic helper code")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2f2a72de67)
Fix copy&paste error, that should have been an assignment instead of an or,
otherwise MTYPE_UC 0x3 can not be updated to MTYPE_RW 0x1.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fc1366016a)
Cc: stable@vger.kernel.org
Now that we've had one bug that occurred in nouveau as the result of
nv50_head_flush_* being called without the appropriate locks, let's add
some lockdep asserts to make sure this doesn't happen in the future.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251219215344.170852-3-lyude@redhat.com
For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
On disconnect drm_atomic_helper_disable_all() is called which
sets both the fb and crtc for a plane to NULL before invoking a commit.
This causes a kernel oops on every display disconnect.
Add guards for those dereferences.
Cc: <stable@vger.kernel.org> # 6.18.x
Fixes: 73cfd166e0 ("drm/gud: Replace simple display pipe with DRM atomic helpers")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Link: https://patch.msgid.link/20251231055039.44266-1-me@shenghaoyang.info
The switch from devm_kzalloc() + drm_panel_init() to
devm_drm_panel_alloc() introduced a regression.
Several panel descriptors do not set connector_type. For those panels,
panel_simple_probe() used to compute a connector type (currently DPI as a
fallback) and pass that value to drm_panel_init(). After the conversion
to devm_drm_panel_alloc(), the call unconditionally used
desc->connector_type instead, ignoring the computed fallback and
potentially passing DRM_MODE_CONNECTOR_Unknown, which
drm_panel_bridge_add() does not allow.
Move the connector_type validation / fallback logic before the
devm_drm_panel_alloc() call and pass the computed connector_type to
devm_drm_panel_alloc(), so panels without an explicit connector_type
once again get the DPI default.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: de04bb0089 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()")
Cc: stable@vger.kernel.org
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/stable/20251126-lcd_panel_connector_type_fix-v2-1-c15835d1f7cb%40microchip.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251218-lcd_panel_connector_type_fix-v3-1-ddcea6d8d7ef@microchip.com
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
The guc_hw_reg_state array is not exported, so make it static.
Fixes the following sparse warning:
drivers/gpu/drm/i915/i915_gpu_error.c:692:3: warning: symbol 'guc_hw_reg_state' was not declared. Should it be static?
Fixes: ba391a102e ("drm/i915/guc: Include the GuC registers in the error state")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260108201202.59250-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 701c474933)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
- A couple more fixes for the lib/crypto KUnit tests
- Fix missing MMU protection for the AES S-box
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaWP6dBQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK89sAQCLiV7LQdtHp7IJ21JhdrxPLSfhiUgp
HeSwwFylciRfggD+Ml19H/Pa3kJYbkQChL44AizlartCaiyLuiEfeTF3NQE=
=dYlq
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- A couple more fixes for the lib/crypto KUnit tests
- Fix missing MMU protection for the AES S-box
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: aes: Fix missing MMU protection for AES S-box
MAINTAINERS: add test vector generation scripts to "CRYPTO LIBRARY"
lib/crypto: tests: Fix syntax error for old python versions
lib/crypto: tests: polyval_kunit: Increase iterations for preparekey in IRQs
Here are some small char/misc driver fixes for some reported issues.
Included in here is:
- much reported rust_binder fix
- counter driver fixes
- new device ids for the mei driver
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaWOjpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylCmACdEcuxjmhVP6Ye7ub22irLxy3h2qYAoJihKZuf
WlNQqB0z2fc/CvfO0xoQ
=/MYq
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for some reported issues.
Included in here is:
- much reported rust_binder fix
- counter driver fixes
- new device ids for the mei driver
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
rust_binder: remove spin_lock() in rust_shrink_free_page()
mei: me: add nova lake point S DID
counter: 104-quad-8: Fix incorrect return value in IRQ handler
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
of SEV noinstr methods, to further robustify the code.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GwVv
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Disable GCOV instrumentation in the SEV noinstr.c collection of SEV
noinstr methods, to further robustify the code"
* tag 'x86-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Disable GCOV on noinstr object
- Fix an endianness bug in the gic-v5 irqchip driver
- Revert a broken commit from the riscv-imsic irqchip driver
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qhAZ
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc irqchip fixes from Ingo Molnar:
- Fix an endianness bug in the gic-v5 irqchip driver
- Revert a broken commit from the riscv-imsic irqchip driver
* tag 'irq-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "irqchip/riscv-imsic: Embed the vector array in lpriv"
irqchip/gic-v5: Fix gicv5_its_map_event() ITTE read endianness
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix CONFIG_RELOCATABLE=y boots by building Image files from vmlinux,
rather than vmlinux.unstripped, now that the .modinfo section is
included in vmlinux.unstripped.
- Prevent branch predictor poisoning microarchitectural attacks that
use the syscall index as a vector by using array_index_nospec() to
clamp the index after the bounds check (as x86 and ARM64 already
do).
- Fix a crash in test_kprobes when building with Clang.
- Fix a deadlock possible when tracing is enabled for SBI ecalls.
- Fix the definition of the Zk standard RISC-V ISA extension bundle,
which was missing the Zknh extension.
- A few other miscellaneous non-functional cleanups, removing unused
macros, fixing an out-of-date path in code comments, resolving a
compile-time warning for a type mismatch in a pr_crit(), and removing
an unnecessary header file inclusion.
-----BEGIN PGP SIGNATURE-----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=BtHz
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Notable changes include a fix to close one common microarchitectural
attack vector for out-of-order cores. Another patch exposed an
omission in my boot test coverage, which is currently missing
relocatable kernels. Otherwise, the fixes seem to be settling down for
us.
- Fix CONFIG_RELOCATABLE=y boots by building Image files from
vmlinux, rather than vmlinux.unstripped, now that the .modinfo
section is included in vmlinux.unstripped
- Prevent branch predictor poisoning microarchitectural attacks that
use the syscall index as a vector by using array_index_nospec() to
clamp the index after the bounds check (as x86 and ARM64 already
do)
- Fix a crash in test_kprobes when building with Clang
- Fix a deadlock possible when tracing is enabled for SBI ecalls
- Fix the definition of the Zk standard RISC-V ISA extension bundle,
which was missing the Zknh extension
- A few other miscellaneous non-functional cleanups, removing unused
macros, fixing an out-of-date path in code comments, resolving a
compile-time warning for a type mismatch in a pr_crit(), and
removing an unnecessary header file inclusion"
* tag 'riscv-for-linus-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: trace: fix snapshot deadlock with sbi ecall
riscv: remove irqflags.h inclusion in asm/bitops.h
riscv: cpu_ops_sbi: smp_processor_id() returns int, not unsigned int
riscv: configs: Clean up references to non-existing configs
riscv: kexec_image: Fix dead link to boot-image-header.rst
riscv: pgtable: Cleanup useless VA_USER_XXX definitions
riscv: cpufeature: Fix Zk bundled extension missing Zknh
riscv: fix KUnit test_kprobes crash when building with Clang
riscv: Sanitize syscall table indexing under speculation
riscv: boot: Always make Image from vmlinux, not vmlinux.unstripped
- Fix swapped example values for the `family` and `machine` attributes
in the sysfs SoC bus ABI documentation.
- Fix Rust build and intra-doc issues when optional subsystems
(CONFIG_PCI, CONFIG_AUXILIARY_BUS, CONFIG_PRINTK) are disabled.
- Fix typos and incorrect safety comments in Rust PCI, DMA, and device
ID documentation.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaWK1TwAKCRBFlHeO1qrK
LlNtAP9a2C6HtdumNpYec5bbEIEAHuWIqH8DoypF0jlIP11E6QD+ONnmiWnlRyb+
iJzTXy7EZfV+/zbszWLpQ6qiuX38vgo=
=MZle
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix swapped example values for the `family` and `machine` attributes
in the sysfs SoC bus ABI documentation
- Fix Rust build and intra-doc issues when optional subsystems
(CONFIG_PCI, CONFIG_AUXILIARY_BUS, CONFIG_PRINTK) are disabled
- Fix typos and incorrect safety comments in Rust PCI, DMA, and
device ID documentation
* tag 'driver-core-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: device: Remove explicit import of CStrExt
rust: pci: fix typos in Bar struct's comments
rust: device: fix broken intra-doc links
rust: dma: fix broken intra-doc links
rust: driver: fix broken intra-doc links to example driver types
rust: device_id: replace incorrect word in safety documentation
rust: dma: remove incorrect safety documentation
docs: ABI: sysfs-devices-soc: Fix swapped sample values
Fixes tracing test_multiple_writes stalls when buffer_size_kb is less
than 12KB.
-----BEGIN PGP SIGNATURE-----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=zuty
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"Fix tracing test_multiple_writes stalls when buffer_size_kb is less
than 12KB"
* tag 'linux_kselftest-fixes-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/tracing: Fix test_multiple_writes stall
