This adds the code for the Atmel touchscreens such as mXT224 to obtain
power regulators for the supply voltages AVDD and VDD. On mobile phones
such as Samsung GT-I8190 (Golden) this is needed to explicitly bring power
online.
We just enable the regulators at probe() and disable them at remove()
or in the error path for now.
As regulators are naturally stubbed if not available, this should have no
impact on existing systems.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201104153032.1387747-3-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This converts the Armel MXT touchscreen bindings to YAML format and
extends them with the following two properties:
- vdda-supply: the optional analog supply voltage
- vdd-supply: the optional digital supply voltage
Tested the schema with all in-tree users and they verify fine.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201104153032.1387747-2-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This driver uses GPIO descriptors to drive the touchscreen RESET line. In
the existing device trees this has in conflict with intution been flagged
as GPIO_ACTIVE_HIGH and the driver then applies the reverse action by
driving the line low (setting to 0) to enter reset state and driving the
line high (setting to 1) to get out of reset state.
The correct way to handle active low GPIO lines is to provide the
GPIO_ACTIVE_LOW in the device tree (thus properly describing the hardware)
and letting the GPIO framework invert the assertion (driving high) to a
low level and vice versa.
This is considered a bug since the device trees are incorrectly
mis-specifying the line as active high.
Fix the driver and all device trees specifying a reset line.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201104153032.1387747-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl+DdgYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGB1sH/0B4REolPPxiQsPL
P45+a2POUU0SQK8NjkcYskQmJ6DnPKkJSXeUU8rzuI2rty5bWEzEBxdUSh064ZaM
DGxkWrdhYNaLJuceNLlanBk3vrM3KwGkaJFSKLgsEXkmH86gl33ptA8nlQVbfc+4
FK4hRZs2J6Y5YRsuzPO8nzzHWs1CThZEcwNPOeIZrAnv+/13zyP/piZ+R/2gKYwy
RVrVrzSTkTGJXotn6J17Sa02+CGv5UqdxOZFv7jimYJOmFT7KnGngNrJbh8aYWk7
vPTRUvGozh6NyYxtRI9LKGZy1yQ05Cl7N927CnFYzD235/eT7zaRDZe1e1JaIE8Z
r2yxGCM=
=ZIYP
-----END PGP SIGNATURE-----
Merge tag 'v5.9' into next
Sync up with mainline to bring in the latest DTS files.
The same clause as its use.
Fixes the following W=1 kernel build warning(s):
include/linux/input/elan-i2c-ids.h:26:36: warning: ‘elan_acpi_id’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201112104420.GG1997862@dell
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is essentially a revert of:
3ac8bf077d ("[PATCH] ads7846: sparc32 warning fix")
By now enable_irq() and disable_irq() are properly defined in
linux/interrupt.h and we do not need to pull in architecture-specific
bits.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
req->sample[1] is not naturally aligned at word boundary, and therefore we
should use get_unaligned_be16() when accessing it.
Fixes: 3eac5c7e44 ("Input: ads7846 - extend the driver for ads7845 controller support")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In some rare cases the 32 bit Rt value will overflow if z2 and x is max,
z1 is minimal value and x_plate_ohms is relatively high (for example 800
ohm). This would happen on some screen age with low pressure.
There are two possible fixes:
- make Rt 64bit
- reorder calculation to avoid overflow
The second variant seems to be preferable, since 64 bit calculation on
32 bit system is a bit more expensive.
Fixes: ffa458c1bd ("spi: ads7846 driver")
Co-developed-by: David Jander <david@protonic.nl>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Starting with 3eac5c7e44 ("Input: ads7846 - extend the driver for ads7845
controller support"), the ads7845 was partially converted to full duplex
mode.
Since it is not touchscreen controller specific, it is better to extend
this conversion to cover entire driver. This will reduce CPU load and make
driver more readable.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20201110085041.16303-2-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If touchscreen is released while busy reading HWMON device, the release
can be missed. The IRQ thread is not started because no touch is active
and BTN_TOUCH release event is never sent.
Fixes: f5a28a7d48 ("Input: ads7846 - avoid pen up/down when reading hwmon")
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20201027105416.18773-1-o.rempel@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/touchscreen/imx6ul_tsc.c: In function ‘adc_irq_fn’:
drivers/input/touchscreen/imx6ul_tsc.c:307:6: warning: variable ‘value’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20201112110204.2083435-6-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/keyboard/samsung-keypad.c: In function ‘samsung_keypad_irq’:
drivers/input/keyboard/samsung-keypad.c:149:15: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201112110204.2083435-3-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Hard-coding resolution for st1633 device was wrong. Some of LCDs like
YTS700TLBC-02-100C has assembled Sitronix st1633 touchcontroller too. But
the resolution is not 320x480 as was hard-coded.
Add new function which reads correct resolution directly from register.
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Link: https://lore.kernel.org/r/20201103073949.12198-1-andrej.valek@siemens.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the kerneldoc warnings from building the driver with W=1.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-2-lee.jones@linaro.org
[dtor: folded together several Lee's patches; added more descriptions]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/input/touchscreen/cyttsp_i2c_common.c:24:
drivers/input/touchscreen/cyttsp4_core.h:236:27: warning: ‘cyttsp4_tch_abs_string’ defined but not used [-Wunused-const-variable=]
236 | static const char const cyttsp4_tch_abs_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/input/touchscreen/cyttsp4_i2c.c:17:
drivers/input/touchscreen/cyttsp4_core.h:236:27: warning: ‘cyttsp4_tch_abs_string’ defined but not used [-Wunused-const-variable=]
236 | static const char * const cyttsp4_tch_abs_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/input/touchscreen/cyttsp4_spi.c:17:
drivers/input/touchscreen/cyttsp4_core.h:236:27: warning: ‘cyttsp4_tch_abs_string’ defined but not used [-Wunused-const-variable=]
236 | static const char * const cyttsp4_tch_abs_string[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-16-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/mouse/cyapa_gen5.c:392: warning: Function parameter or member 'cyapa' not described in 'cyapa_i2c_pip_write'
drivers/input/mouse/cyapa_gen5.c:392: warning: Function parameter or member 'buf' not described in 'cyapa_i2c_pip_write'
drivers/input/mouse/cyapa_gen5.c:392: warning: Function parameter or member 'size' not described in 'cyapa_i2c_pip_write'
drivers/input/mouse/cyapa_gen5.c:444: warning: Function parameter or member 'cyapa' not described in 'cyapa_empty_pip_output_data'
drivers/input/mouse/cyapa_gen5.c:444: warning: Function parameter or member 'buf' not described in 'cyapa_empty_pip_output_data'
drivers/input/mouse/cyapa_gen5.c:444: warning: Function parameter or member 'len' not described in 'cyapa_empty_pip_output_data'
drivers/input/mouse/cyapa_gen5.c:444: warning: Function parameter or member 'func' not described in 'cyapa_empty_pip_output_data'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-4-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/mouse/cyapa.c:130: warning: Function parameter or member 'reg' not described in 'cyapa_i2c_write'
drivers/input/mouse/cyapa.c:130: warning: Excess function parameter 'ret' description in 'cyapa_i2c_write'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-3-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/misc/ab8500-ponkey.c:32: warning: Function parameter or member 'idev' not described in 'ab8500_ponkey'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-5-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/keyboard/cros_ec_keyb.c:72: warning: cannot understand function prototype: 'struct cros_ec_bs_map '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-8-lee.jones@linaro.org
[dtor: fixed up docbook comments for cros_ec_keyb structure as well]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/keyboard/gpio_keys.c:119: warning: Function parameter or member 'dev' not described in 'get_bm_events_by_type'
drivers/input/keyboard/gpio_keys.c:119: warning: Excess function parameter 'input' description in 'get_bm_events_by_type'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-12-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'psmouse' not described in 'elantech_setup_smbus'
drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'info' not described in 'elantech_setup_smbus'
drivers/input/mouse/elantech.c:1837: warning: Function parameter or member 'leave_breadcrumbs' not described in 'elantech_setup_smbus'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-13-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'num_rows' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'num_cols' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'input' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'regmap' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'key_sense_irq' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'key_stuck_irq' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'keycodes' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'dev' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'keystate' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'stuckstate' not described in 'pmic8xxx_kp'
drivers/input/keyboard/pmic8xxx-keypad.c:106: warning: Function parameter or member 'ctrl_reg' not described in 'pmic8xxx_kp'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-21-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/keyboard/nomadik-ske-keypad.c:71: warning: Function parameter or member 'pclk' not described in 'ske_keypad'
drivers/input/keyboard/nomadik-ske-keypad.c:71: warning: Function parameter or member 'ske_keypad_lock' not described in 'ske_keypad'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-20-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'input_dev' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'client' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regmap' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'work' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'regulator' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'page' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'magnitude' not described in 'drv2667_data'
drivers/input/misc/drv2667.c:109: warning: Function parameter or member 'frequency' not described in 'drv2667_data'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-19-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'input_dev' not described in 'drv2665_data'
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'client' not described in 'drv2665_data'
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regmap' not described in 'drv2665_data'
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'work' not described in 'drv2665_data'
drivers/input/misc/drv2665.c:59: warning: Function parameter or member 'regulator' not described in 'drv2665_data'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-18-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes the following W=1 kernel build warning(s):
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'input_dev' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'client' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regmap' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'work' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'enable_gpio' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'regulator' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'magnitude' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'mode' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'library' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'rated_voltage' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:194: warning: Function parameter or member 'overdrive_voltage' not described in 'drv260x_data'
drivers/input/misc/drv260x.c:244: warning: Function parameter or member 'voltage' not described in 'drv260x_calculate_voltage'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20201104162427.2984742-17-lee.jones@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The eKTF2132 is a touchscreen controller found, for example, in the Kobo
Aura ebook reader. It is similar to the ektf2127, but it uses a different
packet type to report touch events.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20201106112412.390724-3-j.neuschaefer@gmx.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The eKTF2132 is a touchscreen controller found, for example, in the Kobo
Aura ebook reader. It is similar to the ektf2127, but it uses a different
packet type to report touch events.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20201106112412.390724-2-j.neuschaefer@gmx.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Merge misc fixes from Andrew Morton:
"Five fixes.
Subsystems affected by this patch series: MAINTAINERS, mm/pagemap,
mm/swap, and mm/hugetlb"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: khugepaged: recalculate min_free_kbytes after memory hotplug as expected by khugepaged
mm: validate inode in mapping_set_error()
mm: mmap: Fix general protection fault in unlink_file_vma()
MAINTAINERS: Antoine Tenart's email address
MAINTAINERS: change hardening mailing list
Pull vfs fix from Al Viro:
"Fixes an obvious bug (memory leak introduced in 5.8)"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
pipe: Fix memory leaks in create_pipe_files()
- Fix a (hopefully final) IRQ state tracking bug vs. MCE handling
- Fix a documentation link
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UbZR
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Two fixes:
- Fix a (hopefully final) IRQ state tracking bug vs MCE handling
- Fix a documentation link"
* tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/x86: Fix incorrect references to zero-page.txt
x86/mce: Use idtentry_nmi_enter/exit()
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl+CuIsRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hHiQ//SGk+Pz9RCxUiW6AK40Yxvl0jjqWdpYQY
y0I6HaI1NVNLXVO7m65zXUr/23jxxxD1Ysst0SxM/v1hli4PTmzIKqcr1mGgwwn2
9miAQHUNn5wd6RCw9lYMXbkIqhRfd2Zm376Ydia/620N+MjUfO5lroLpK1OyF4Q9
jwsSWnwJRsytXvC5Qj7eRuRCxYXDk+KgpFBU8RspXI7I+UdzPL0mBJm1XIif38or
ueID3iHTiNErXaHGuoDeGQJAawUFS+Y44BAzsWOdScKLeX4PwPzK5QimGBnoTfGb
Jw3rvn2zZS26GUPtVep4QRFPxd41K6G3KyAHqUqY/kkzzIPbO+pKb/8CIRSkVOyB
pFsdRZtO2+bLnThckZKxlJBWrYBSN72koOvsIICPOcovsbLcr/U6mqKZYjqyw3VN
NXn90nzkghATRGZkYXpF/I+1cgbtqOHf2EoTIq+pKGsahmqiy4s6twr4SLCqLxbF
JLa+oUcECfywTBHJbkc3/V7MQ9YPi3eCNTcOr6DQBXoX8MqL2oPR6ZNK6OFNolz3
sidfs72+jtWLnAKbd34KueZioccK4jvY7bnrcrG70bUsO9nP2Zj6qcq1iijd8V5f
o7xtFG6DrhEGwLCvHbtw9oA6Iqd1c+5RT7TkV+1JTFj7voE2/NYXpwRRh6uSZ/vO
Y0/q66Hmn7E=
=IeZB
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Ingo Molnar:
"Fix an error handling bug that can cause a lockup if a CPU is offline
(doh ...)"
* tag 'perf-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix task_function_call() error handling
When memory is hotplug added or removed the min_free_kbytes should be
recalculated based on what is expected by khugepaged. Currently after
hotplug, min_free_kbytes will be set to a lower default and higher
default set when THP enabled is lost.
This change restores min_free_kbytes as expected for THP consumers.
[vijayb@linux.microsoft.com: v5]
Link: https://lkml.kernel.org/r/1601398153-5517-1-git-send-email-vijayb@linux.microsoft.com
Fixes: f000565adb ("thp: set recommended min free kbytes")
Signed-off-by: Vijay Balakrishna <vijayb@linux.microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Allen Pais <apais@microsoft.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/1600305709-2319-2-git-send-email-vijayb@linux.microsoft.com
Link: https://lkml.kernel.org/r/1600204258-13683-1-git-send-email-vijayb@linux.microsoft.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The swap address_space doesn't have host. Thus, it makes kernel crash once
swap write meets error. Fix it.
Fixes: 735e4ae5ba ("vfs: track per-sb writeback errors and report them to syncfs")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Andres Freund <andres@anarazel.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201010000650.750063-1-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The syzbot reported the below general protection fault:
general protection fault, probably for non-canonical address
0xe00eeaee0000003b: 0000 [#1] PREEMPT SMP KASAN
KASAN: maybe wild-memory-access in range [0x00777770000001d8-0x00777770000001df]
CPU: 1 PID: 10488 Comm: syz-executor721 Not tainted 5.9.0-rc3-syzkaller #0
RIP: 0010:unlink_file_vma+0x57/0xb0 mm/mmap.c:164
Call Trace:
free_pgtables+0x1b3/0x2f0 mm/memory.c:415
exit_mmap+0x2c0/0x530 mm/mmap.c:3184
__mmput+0x122/0x470 kernel/fork.c:1076
mmput+0x53/0x60 kernel/fork.c:1097
exit_mm kernel/exit.c:483 [inline]
do_exit+0xa8b/0x29f0 kernel/exit.c:793
do_group_exit+0x125/0x310 kernel/exit.c:903
get_signal+0x428/0x1f00 kernel/signal.c:2757
arch_do_signal+0x82/0x2520 arch/x86/kernel/signal.c:811
exit_to_user_mode_loop kernel/entry/common.c:136 [inline]
exit_to_user_mode_prepare+0x1ae/0x200 kernel/entry/common.c:167
syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:242
entry_SYSCALL_64_after_hwframe+0x44/0xa9
It's because the ->mmap() callback can change vma->vm_file and fput the
original file. But the commit d70cec8983 ("mm: mmap: merge vma after
call_mmap() if possible") failed to catch this case and always fput()
the original file, hence add an extra fput().
[ Thanks Hillf for pointing this extra fput() out. ]
Fixes: d70cec8983 ("mm: mmap: merge vma after call_mmap() if possible")
Reported-by: syzbot+c5d5a51dcbb558ca0cb5@syzkaller.appspotmail.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Cc: Hongxiang Lou <louhongxiang@huawei.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Link: https://lkml.kernel.org/r/20200916090733.31427-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use my kernel.org address instead of my bootlin.com one.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20201005164533.16811-1-atenart@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As more email from git history gets aimed at the OpenWall
kernel-hardening@ list, there has been a desire to separate "new topics"
from "on-going" work.
To handle this, the superset of hardening email topics are now to be
directed to linux-hardening@vger.kernel.org.
Update the MAINTAINERS file and the .mailmap to accomplish this, so that
linux-hardening@ can be treated like any other regular upstream kernel
development list.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: "Tobin C. Harding" <me@tobin.cc>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/linux-hardening/202010051443.279CC265D@keescook/
Link: https://lkml.kernel.org/r/20201006000012.2768958-1-keescook@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i2c fixes from Wolfram Sang:
"Some more driver bugfixes for I2C. Including a revert - the updated
series for it will come during the next merge window"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: owl: Clear NACK and BUS error bits
Revert "i2c: imx: Fix reset of I2SR_IAL flag"
i2c: meson: fixup rate calculation with filter delay
i2c: meson: keep peripheral clock enabled
i2c: meson: fix clock setting overwrite
i2c: imx: Fix reset of I2SR_IAL flag
On setxattr() syscall path due to an apprent typo the size of a dynamically
allocated memory chunk for storing struct smb2_file_full_ea_info object is
computed incorrectly, to be more precise the first addend is the size of
a pointer instead of the wanted object size. Coincidentally it makes no
difference on 64-bit platforms, however on 32-bit targets the following
memcpy() writes 4 bytes of data outside of the dynamically allocated memory.
=============================================================================
BUG kmalloc-16 (Not tainted): Redzone overwritten
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: 0x79e69a6f-0x9e5cdecf @offset=368. First byte 0x73 instead of 0xcc
INFO: Slab 0xd36d2454 objects=85 used=51 fp=0xf7d0fc7a flags=0x35000201
INFO: Object 0x6f171df3 @offset=352 fp=0x00000000
Redzone 5d4ff02d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 6f171df3: 00 00 00 00 00 05 06 00 73 6e 72 75 62 00 66 69 ........snrub.fi
Redzone 79e69a6f: 73 68 32 0a sh2.
Padding 56254d82: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
CPU: 0 PID: 8196 Comm: attr Tainted: G B 5.9.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
dump_stack+0x54/0x6e
print_trailer+0x12c/0x134
check_bytes_and_report.cold+0x3e/0x69
check_object+0x18c/0x250
free_debug_processing+0xfe/0x230
__slab_free+0x1c0/0x300
kfree+0x1d3/0x220
smb2_set_ea+0x27d/0x540
cifs_xattr_set+0x57f/0x620
__vfs_setxattr+0x4e/0x60
__vfs_setxattr_noperm+0x4e/0x100
__vfs_setxattr_locked+0xae/0xd0
vfs_setxattr+0x4e/0xe0
setxattr+0x12c/0x1a0
path_setxattr+0xa4/0xc0
__ia32_sys_lsetxattr+0x1d/0x20
__do_fast_syscall_32+0x40/0x70
do_fast_syscall_32+0x29/0x60
do_SYSENTER_32+0x15/0x20
entry_SYSENTER_32+0x9f/0xf2
Fixes: 5517554e43 ("cifs: Add support for writing attributes on SMB2+")
Signed-off-by: Vladimir Zapolskiy <vladimir@tuxera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There have been elusive reports of filemap_fault() hitting its
VM_BUG_ON_PAGE(page_to_pgoff(page) != offset, page) on kernels built
with CONFIG_READ_ONLY_THP_FOR_FS=y.
Suren has hit it on a kernel with CONFIG_READ_ONLY_THP_FOR_FS=y and
CONFIG_NUMA is not set: and he has analyzed it down to how khugepaged
without NUMA reuses the same huge page after collapse_file() failed
(whereas NUMA targets its allocation to the respective node each time).
And most of us were usually testing with CONFIG_NUMA=y kernels.
collapse_file(old start)
new_page = khugepaged_alloc_page(hpage)
__SetPageLocked(new_page)
new_page->index = start // hpage->index=old offset
new_page->mapping = mapping
xas_store(&xas, new_page)
filemap_fault
page = find_get_page(mapping, offset)
// if offset falls inside hpage then
// compound_head(page) == hpage
lock_page_maybe_drop_mmap()
__lock_page(page)
// collapse fails
xas_store(&xas, old page)
new_page->mapping = NULL
unlock_page(new_page)
collapse_file(new start)
new_page = khugepaged_alloc_page(hpage)
__SetPageLocked(new_page)
new_page->index = start // hpage->index=new offset
new_page->mapping = mapping // mapping becomes valid again
// since compound_head(page) == hpage
// page_to_pgoff(page) got changed
VM_BUG_ON_PAGE(page_to_pgoff(page) != offset)
An initial patch replaced __SetPageLocked() by lock_page(), which did
fix the race which Suren illustrates above. But testing showed that it's
not good enough: if the racing task's __lock_page() gets delayed long
after its find_get_page(), then it may follow collapse_file(new start)'s
successful final unlock_page(), and crash on the same VM_BUG_ON_PAGE.
It could be fixed by relaxing filemap_fault()'s VM_BUG_ON_PAGE to a
check and retry (as is done for mapping), with similar relaxations in
find_lock_entry() and pagecache_get_page(): but it's not obvious what
else might get caught out; and khugepaged non-NUMA appears to be unique
in exposing a page to page cache, then revoking, without going through
a full cycle of freeing before reuse.
Instead, non-NUMA khugepaged_prealloc_page() release the old page
if anyone else has a reference to it (1% of cases when I tested).
Although never reported on huge tmpfs, I believe its find_lock_entry()
has been at similar risk; but huge tmpfs does not rely on khugepaged
for its normal working nearly so much as READ_ONLY_THP_FOR_FS does.
Reported-by: Denis Lisov <dennis.lissov@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206569
Link: https://lore.kernel.org/linux-mm/?q=20200219144635.3b7417145de19b65f258c943%40linux-foundation.org
Reported-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/linux-xfs/?q=20200616013309.GB815%40lca.pw
Reported-and-analyzed-by: Suren Baghdasaryan <surenb@google.com>
Fixes: 87c460a0bd ("mm/khugepaged: collapse_shmem() without freezing new_page")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org # v4.9+
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the NACK and BUS error bits are set by the hardware, the driver is
responsible for clearing them by writing "1" into the corresponding
status registers.
Hence perform the necessary operations in owl_i2c_interrupt().
Fixes: d211e62af4 ("i2c: Add Actions Semiconductor Owl family S900 I2C driver")
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This reverts commit fa4d305568. An updated
version was sent. So, revert this version and give the new version more
time for testing.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
One last minute fix for v5.9 which has been causing crashes in test
systems with the fsl-dspi driver when they hit deferred probe (and which
I probably let cook in next a bit longer than is ideal) plus an update
to MAINTAINERS reflecting Serge's extensive and detailed recent work on
the DesignWare driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl+A7v4ACgkQJNaLcl1U
h9C4wgf/Uueuh7a92KHslaVbH9NisM80NimbWXmVAMHQ7oTpRPQg84CV+/a6glbc
33aaCKcSDA8Tgww6n6uSXDZCwgjQ5WuXI7yDVDoE/wDC2p0uD8jC3Sz0hV2OU+37
8MGaYHONdKFELKZTXLnKU7J1yWzwHiWFDdkzZaAOabI80e1Ar2XyLkXDikOZVB6+
65c9pmF1V9tcMxuLyqceTqP6ilTt8MmsgOMr/d+w7hjEmtx3WH7ghv/eAU8cOUgf
kVPsEvdyAY9EXlGAZ7g9b5G1SqUs1KJK37HvfdVdq8LoLzwbQON1K6welqXk9Y6h
v5uFRg13kw1MDPR84nFANhWPGMekTA==
=pg9I
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One last minute fix for v5.9 which has been causing crashes in test
systems with the fsl-dspi driver when they hit deferred probe (and
which I probably let cook in next a bit longer than is ideal).
And an update to MAINTAINERS reflecting Serge's extensive and
detailed recent work on the DesignWare driver"
* tag 'spi-fix-v5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
MAINTAINERS: Add maintainer of DW APB SSI driver
spi: fsl-dspi: fix NULL pointer dereference
I have two fixes this week:
* A fix to actually reserve the device tree's memory. Without this the device
tree can be overwritten on systems that don't otherwise reserve it. This
issue should only manifest on !MMU systems.
* A workaround for a BUG() that triggers when the memory that originally
contained initdata is freed and later repurposed. This triggers a BUG() on
builds that with HARDENED_USERCOPY enabled.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl+AoxMTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiZC/EACRoWtgJNGeRJ4Bzd6UjkbHkrxNte6v
qQM3Vm5xCBsx1Ssc8bp9S/YSeTPIa7/PrYKdN+EpfpK8XuIgyljy1bamMVGqg7M1
KRURQszxBqNqk0XyXe12unBYQ0cK7JOs00lx8+zLTmmp07wrWMYVN0fU+aPiGt0d
aXj8nqSHG7qAWHVF1jg7OH2dtf4+hdPkWV/I0JOPAQKUNQrsdBL55pQOc7D6PVHa
3l54xrc1RmVH2zXqjrNrNG/Eh2T4IcrVVIEKeispGvsv/jysm4RkKF3fHUIEBX/Z
3X/sSdQIt8IYLsVkWTvd5omrYzNgK0ld7oJk1rFlUrnH6S/ea6IEUEDotHELkFE5
ot9e33S7SbrUFGkxmeLSt0Wt0Hdg6dRS+9fLzshTulUdyOuhHnp6Yb3dYqTIirNa
YWT0dbDQtz7sHvmHGe6BAvDriwM6a6ZmL5o7/JBg0nzKt3hGuGPPNFPAmcawZlNU
9pnP1l7jjfDsLvQ9xhRfX/qZiiRwQjDGhuy431/z4sXleyWztbgvVZ9cwbmGEGUd
e37hnfhlCofzwxPpwxrygKqBKBuiLnG35MCL5fbJRCDkM3NOG37aHj6XKFQZCb6p
Kykl8slpIzT/GAIB+EcSPTGgB/v1kNQdCwLF58vnNZKRY2KhJg/XjHlqDbg4wDqm
U+tLjwKnD9/oOg==
=4txT
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes this week:
- A fix to actually reserve the device tree's memory. Without this
the device tree can be overwritten on systems that don't otherwise
reserve it. This issue should only manifest on !MMU systems.
- A workaround for a BUG() that triggers when the memory that
originally contained initdata is freed and later repurposed. This
triggers a BUG() on builds that had HARDENED_USERCOPY enabled"
* tag 'riscv-for-linus-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup bootup failure with HARDENED_USERCOPY
RISC-V: Make sure memblock reserves the memory containing DT
Just a single change to revert enablement of packet error checking
for battery data on Chromebooks, since some of their embedded
controllers do not handle it correctly.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAl+AoycACgkQ2O7X88g7
+pqMCQ//UIISw36pIoARWoPqGYY3vqemN8TjC5QjmkyIoAhK/GY2vcEfBA+uBs/j
pb2C5V1MQOsQRQWobAQh47NVonU10SZupodZtQBw6xQFRvwrkzMJCw0wpo+7jppl
pZkyxjcojdZeAlhHwMalLi/sQEOLlF0aj6rFZcEz2kMaqB/xsXZmwtH3TzH560qi
Z+H1qWZnuqh+KoyQE+Wwo1yc75kjondkMZGcDqe7n6uST2UF90xg61snCr9mXnbr
8FlRxBuPVcud+7lEwvS9PFZR1qiH6NjPmTDecBIuvBAarnLlMxsVOIeJXbHjU40s
nitqjXUSHbYEeotRhWd8BHcu2REzCL1oyLRZsNgL0E/d6/9twcjzWVkuvA8gRb7h
ptbe0VCLnnDgZFji9ZxMhISZ1cQw8xRGq73GnZseaetNDBn7YxuNt3jNOxPw/dp8
KHci8q60YQpLIvyaxO+2Z06EgTop18AG7tFmz1PQEd6yWTMdGm0aRwotZHzgOO/C
1np6TXJOtg4A7FhEluWchBvpDi17aHxNt+dcxzie/KtxlJKxInd7/TxsJk3uukxH
OJWODi5k0sDzZj2Rnw70uCiKfI89iXAev13gwfee+v8zTeujHdKe/dEpvPOQBqtY
2QA9wFdBDsgZ6I1smVL0fz05aDJ8hrzNj/Y1yc9tLhzrVoEwmjE=
=VEU/
-----END PGP SIGNATURE-----
Merge tag 'for-v5.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fix from Sebastian Reichel:
"Just a single change to revert enablement of packet error checking for
battery data on Chromebooks, since some of their embedded controllers
do not handle it correctly"
* tag 'for-v5.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: sbs-battery: chromebook workaround for PEC
- Fix a compilation issue with User Mode Linux.
- Handle spurious interrupts properly in the PCA953x driver.
-----BEGIN PGP SIGNATURE-----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=yEo/
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some late fixes: one IRQ issue and one compilation issue for UML.
- Fix a compilation issue with User Mode Linux
- Handle spurious interrupts properly in the PCA953x driver"
* tag 'gpio-v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Survive spurious interrupts
gpiolib: Disable compat ->read() code in UML case
