All the tables of NETC switch are managed through the command BD ring,
but unlike ENETC, the switch has two command BD rings, if the current
ring is busy, the switch driver can switch to another ring to manage
the table. Currently, the NTMP driver does not support multiple rings.
Therefore, update ntmp_select_and_lock_cbdr() to select a appropriate
ring to execute the command for the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-9-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ingress port filter table (IPFT )contains a set of filters each
capable of classifying incoming traffic using a mix of L2, L3, and L4
parsed and arbitrary field data. As a result of a filter match, several
actions can be specified such as on whether to deny or allow a frame,
overriding internal QoS attributes associated with the frame and setting
parameters for the subsequent frame processing functions, such as stream
identification, policing, ingress mirroring. Each entry corresponds to a
filter. The ingress port filter entries are added using a precedence
value. If a frame matches multiple entries, the entry with the higher
precedence is used. Currently, this patch only adds "Add" and "Delete"
operations to the ingress port filter table. These two interfaces will
be used by both ENETC driver and NETC switch driver.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-8-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer pool table contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. The Entry ID value
represents the buffer pool ID to access.
The buffer pool table is a static bounded index table, buffer pools are
always present and enabled. It only supports Update and Query operations,
This patch only adds ntmp_bpt_update_entry() helper to support updating
the specified entry of the buffer pool table. Query action to the table
will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-7-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The VLAN filter table contains configuration and control information for
each VLAN configured on the switch. Each VLAN entry includes the VLAN
port membership, which FID to use in the FDB lookup, which spanning tree
group to use, the egress frame modification actions to apply to a frame
exiting form this VLAN, and various configuration and control parameters
for this VLAN.
The VLAN filter table can only be managed by the command BD ring using
table management protocol version 2.0. The table supports Add, Delete,
Update and Query operations. And the table supports 3 access methods:
Entry ID, Exact Match Key Element and Search. But currently we only add
the ntmp_vft_add_entry() helper to support the upcoming switch driver to
add an entry to the VLAN filter table. Other interfaces will be added in
the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-6-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The FDB table is used for MAC learning lookups and MAC forwarding lookups.
Each table entry includes information such as a FID and MAC address that
may be unicast or multicast and a forwarding destination field containing
a port bitmap identifying the associated port(s) with the MAC address.
FDB table entries can be static or dynamic. Static entries are added from
software whereby dynamic entries are added either by software or by the
hardware as MAC addresses are learned in the datapath.
The FDB table can only be managed by the command BD ring using table
management protocol version 2.0. Table management command operations Add,
Delete, Update and Query are supported. And the FDB table supports three
access methods: Entry ID, Exact Match Key Element and Search. This patch
adds the following basic supports to the FDB table.
ntmp_fdbt_update_entry() - update the configuration element data of a
specified FDB entry
ntmp_fdbt_delete_entry() - delete a specified FDB entry
ntmp_fdbt_add_entry() - add an entry into the FDB table
ntmp_fdbt_search_port_entry() - Search the FDB entry on the specified
port based on RESUME_ENTRY_ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before probing the NETC switch driver, some pre-initialization needs to
be set in NETCMIX and IERB to ensure that the switch can work properly.
For example, i.MX94 NETC switch has three external ports and each port
is bound to a link. And each link needs to be configured so that it can
work properly, such as I/O variant and MII protocol.
In addition, the switch port 2 (MAC 2) and ENETC 0 (MAC 3) share the same
parallel interface, they cannot be used at the same time due to the SoC
constraint. And the MAC selection is controlled by the mac2_mac3_sel bit
of EXT_PIN_CONTROL register. Currently, the interface is set for ENETC 0
by default unless the switch port 2 is enabled in the DT node.
Like ENETC, each external port of the NETC switch can manage its external
PHY through its port MDIO registers. And the port can only access its own
external PHY by setting the PHY address to the LaBCR[MDIO_PHYAD_PRTAD].
If the accessed PHY address is not equal to LaBCR[MDIO_PHYAD_PRTAD], then
the MDIO access initiated by port MDIO will be invalid.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-4-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add bindings for NETC switch. This switch is a PCIe function of NETC IP,
it supports advanced QoS with 8 traffic classes and 4 drop resilience
levels, and a full range of TSN standards capabilities. The switch CPU
port connects to an internal ENETC port, which is also a PCIe function
of NETC IP. So these two ports use a light-weight "pseudo MAC" instead
of a back-to-back MAC, because the "pseudo MAC" provides the delineation
between switch and ENETC, this translates to lower power (less logic and
memory) and lower delay (as there is no serialization delay across this
link).
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260518082506.1318236-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current description indicates that the 'dsa,member' property cannot
be set for a switch that is not part of any cluster. Vladimir thinks
that this is a case where the actual technical limitation was poorly
transposed into words when this restriction was first documented, in
commit 8c5ad1d617 ("net: dsa: Document new binding").
The true technical limitation is that many DSA tagging protocols are
topology-unaware, and always call dsa_conduit_find_user() with a
switch_id of 0. Specifying a custom "dsa,member" property with a
non-zero switch_id would break them.
Therefore, for topology-aware switches, it is fine to specify this
property for them, even if they are not part of any cluster. Our NETC
switch is a good example which is topology-aware, the switch_id is
carried in the switch tag, but the switch_id 0 is reserved for VEPA
switch and cannot be used, so we need to use this property to assign
a non-zero switch_id for it.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260518082506.1318236-2-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan says:
====================
net/mlx5: Prepare eswitch infrastructure for satellite PF support
A satellite PF is a new SmartNIC configuration that adds another
physical function on the DPU that is not an eswitch manager and not a
page manager. The satellite PF can have its own SFs and can be passed
through to a VM on the DPU, providing an isolated function for users who
should not have access to the privileged ECPF. The ECPF handles the
satellite PF and the host PF in a similar way, using the same management
framework.
This series prepares the mlx5 eswitch command interface and vport
infrastructure for satellite PF support.
The first two patches abstract host PF data parsing behind a helper and
switch to the v1 response layout for query_esw_functions when supported,
so callers are insulated from layout differences.
The IPsec VF checks are tightened to use mlx5_eswitch_is_vf_vport()
instead of comparing against a specific vport number.
The remaining patches refactor SET_HCA_CAP and enable/disable_hca
command helpers to support vhca_id-based addressing, which is required
for managing functions that are not directly addressable by function_id.
A follow-up series will introduce satellite PF discovery and management
using this infrastructure.
V1:
https://lore.kernel.org/all/20260510053448.326823-1-tariqt@nvidia.com/
====================
Link: https://patch.msgid.link/20260518071356.345723-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the host-PF-specific mlx5_cmd_host_pf_enable/disable_hca()
into generic mlx5_cmd_pf_enable/disable_hca() that accept a vport
number. The new functions use vhca_id as function_id when supported.
Similarly, refactor the eswitch layer into generic static helpers
mlx5_esw_pf_enable/disable_hca() with thin wrappers for the host PF
case, in preparation for enable_hca on satellite PF vports.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-9-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use mlx5_vport_set_other_func_cap() and
mlx5_vport_set_other_func_general_cap() in the IPsec eswitch functions
instead of open-coding the SET_HCA_CAP command. This removes redundant
buffer allocation and boilerplate, and also enables vhca_id based
addressing when supported.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-8-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use mlx5_vport_set_other_func_general_cap() instead of open-coding the
SET_HCA_CAP command. This removes redundant buffer allocation and
ensures consistent use of vport-based function addressing.
mlx5_vport_set_other_func_general_cap() supports both function_id and
vhca_id based addressing, so this also enables SET_HCA_CAP for vhca_id
indexed functions which was not supported before.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-7-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add mlx5_vport_set_other_func_general_cap() convenience macro, symmetric
to the existing mlx5_vport_get_other_func_general_cap(), and use it in
mlx5_devlink_port_fn_roce_set().
No functional change in this patch.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-6-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mlx5_vport_set_other_func_cap() and mlx5_vport_get_vhca_id() allocate
command buffers that embed the HCA capability union, exceeding 4KiB.
Use kvzalloc/kvfree so the allocation can fall back to vmalloc when
contiguous memory is scarce.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-5-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IPsec eswitch offload operations and the enabled_ipsec_vf_count counter
are intended for VF vports only. Replace the MLX5_VPORT_HOST_PF checks
with mlx5_eswitch_is_vf_vport() to properly identify VF vports, as
preparation for adding another type of PF vports.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-4-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the v1 response layout for the query_esw_functions command when
supported by the device. When query_host_net_function_v1 capability is
set, use MLX5_QUERY_ESW_FUNC_OP_MOD_LAYOUT_V1 to retrieve parameters
for multiple network functions, allocating the output buffer according
to query_host_net_function_num_max. Validate that firmware does not
return more entries than the allocated buffer.
The v1 layout reports vhca_state instead of the legacy host_pf_disabled
bit. PFs transition through ALLOCATED, ACTIVE, and IN_USE states (they
do not use TEARDOWN_REQUEST as SFs do). When the ECPF calls disable_hca,
firmware resets the PF and moves it to ALLOCATED. When the ECPF calls
enable_hca, the PF moves to ACTIVE, and once the PF driver enables it,
it reaches IN_USE. The PF is only fully operational in IN_USE, so
pf_disabled is derived as vhca_state != IN_USE, equivalent to the legacy
host_pf_disabled bit.
The mlx5_esw_get_host_pf_info() helper abstracts parsing the command
output in both legacy and new formats, so callers do not need to handle
the different layouts.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a helper mlx5_esw_get_host_pf_info() to retrieve host PF data from
the query_esw_functions command output, so callers no longer need to
parse the layout to obtain the required information.
Convert all callers of mlx5_esw_query_functions() to use the new helper,
preparing for upcoming support of the new op_mod that returns data in
the network_function_params layout.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260518071356.345723-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima says:
====================
udp_tunnel: Speed up UDP tunnel device destruction (Part II)
Most of the UDP tunnel devices called synchronize_rcu() twice
during destruction, for example, vxlan had
1) synchronize_rcu() in udp_tunnel_sock_release()
2) synchronize_net() in vxlan_sock_release()
The former was already removed by:
https://lore.kernel.org/netdev/20260502031401.3557229-1-kuniyu@google.com/
This series removes the latter.
Patch 1 & 2 & 4 remove synchronize_net() placed before
udp_tunnel_sock_release().
Patch 3 removes yet another unnecessary synchronize_net() in
geneve_unquiesce().
Patch 5 is a follow-up patch for a sparse report by kernel test robot.
====================
Link: https://patch.msgid.link/20260518050726.318824-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kernel test robot reported sparse warning in bareudp_sock_release():
drivers/net/bareudp.c:288:12: warning: incorrect type in assignment (different address spaces)
drivers/net/bareudp.c:288:12: expected struct sock *sk
drivers/net/bareudp.c:288:12: got struct sock [noderef] __rcu *sk
The warning is not new and exists since the initial bareudp commit
571912c69f ("net: UDP tunnel encapsulation module for tunnelling
different protocols like MPLS, IP, NSH etc.").
Let's use rtnl_dereference().
Note that bareudp_sock_release() is called from bareudp_stop()
under RTNL, so there is no real issue even without the helper.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605062359.e3gOfZCr-lkp@intel.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
synchronize_net() in bareudp_sock_release() has existed since
day 1, commit 571912c69f ("net: UDP tunnel encapsulation module
for tunnelling different protocols like MPLS, IP, NSH etc.").
It was most likely copied from a similar tunneling device like
vxlan or geneve.
bareudp_sock_release() is called from dev->netdev_ops->ndo_stop(),
and synchronize_net() in unregister_netdevice_many_notify() ensures
that inflight bareudp fast paths finish before bareudp_dev is freed.
Let's remove the redundant synchronize_net() in bareudp_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When changing the geneve config, geneve_changelink() sandwiches
the config memcpy() between geneve_quiesce() and geneve_unquiesce().
geneve_quiesce() temporarily clears geneve->sock[46] and their
sk_user_data, and then calls synchronize_net() to wait for inflight
fast paths to finish.
geneve_unquiesce() then restores the cleared pointers, but it also
superfluously calls synchronize_net().
The latter synchronize_net() provides no benefit; with or without it,
inflight fast paths can see either the NULL pointers or the original
pointers alongside the new configuration.
Let's remove the redundant synchronize_net() in geneve_unquiesce().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vxlan previously had an issue where the fast path could access
stale pointers, which was fixed by commit c6fcc4fc5f ("vxlan:
avoid using stale vxlan socket.").
geneve later followed the same pattern, and commit fceb9c3e38
("geneve: avoid using stale geneve socket.") copied synchronize_net()
from vxlan_sock_release() into geneve_sock_release().
However, that change occurred after commit ca065d0cf8 ("udp: no
longer use SLAB_DESTROY_BY_RCU"), and geneve had already been
using kfree_rcu() to free geneve_sock.
Therefore, the synchronize_net() was never actually needed there.
Let's remove the redundant synchronize_net() in geneve_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially, a dedicated workqueue was used to defer calling
udp_tunnel_sock_release(vxlan_sock->sock) and kfree(vxlan_sock).
Later, commit 0412bd931f ("vxlan: synchronously and race-free
destruction of vxlan sockets") removed the workqueue and instead
invoked these two functions immediately after synchronize_net().
This was intended to prevent UAF of the UDP socket in the fast path.
( Note that the "nondeterministic behaviour" mentioned in that
commit was not addressed, as another thread not waiting RCU gp
still sees the same behaviour. )
However, a week prior to that change, commit ca065d0cf8 ("udp:
no longer use SLAB_DESTROY_BY_RCU") had already moved UDP socket
freeing to after the RCU grace period. This made the synchronize_net()
in vxlan_sock_release() completely redundant.
Since vxlan_sock now uses kfree_rcu() and is invoked after
udp_tunnel_sock_release(), vxlan_sock is guaranteed to be freed
either at the same time or after the UDP socket is released,
following the RCU grace period.
Let's remove the redundant synchronize_net() in vxlan_sock_release().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260518050726.318824-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net/sched: sch_drr: lockless cl->deficit and cl->quantum
First patch adds missing annotations around cl->deficit.
Second patch makes cl->quantum lockless, to prepare
future lockless qdisc dumps.
====================
Link: https://patch.msgid.link/20260519094618.2632073-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drr_dump_class_stats() runs without qdisc spinlock held.
Add missing READ_ONCE()/WRITE_ONCE() annotations around cl->deficit.
Fixes: edb09eb17e ("net: sched: do not acquire qdisc spinlock in qdisc/class stats dump")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260519094618.2632073-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5e138e0ec3 ("w5100: remove MMIO support") removes
include/linux/platform_data/wiznet.h, but misses to remove the file entry
in NETWORKING DRIVERS referring to that file.
Remove the obsolete file entry in NETWORKING DRIVERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260519091646.302458-1-lukas.bulwahn@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20260519140101.1584946-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260519142710.1587324-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching these arrays, unify usage of whitespace in the list
terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260519145722.1590298-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching this array, unify usage of whitespace in the list
terminator to what most other arrays are using.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260519153613.1594429-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260519160721.1597568-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the per-DMB connection pointers in the SMCD device allocation
instead of allocating a separate connection array.
This keeps the connection table tied to the SMCD device lifetime and
simplifies the allocation and cleanup paths.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20260519005206.628071-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PPCNT group 0x10 (per-priority counters) carries an rx_discards field at
offset 0x78. These counters aggregate up into if_in_discards, but don't
show up anywhere else. Since there are many things that aggregate into
`if_in_discards`, having these counters helps distinguish what caused
those discards (in my case they were caused by headroom buffer overruns
due to inappropriately configured buffer sizes).
Of note, from emperical testing, these counter are per-"priority group"
(PG) not per-"switch priority". It's a bit confusing, because the rest
of these counter are per-"switch priority" and the header file calls
these "Per Priority Group Counters". However, that should be read as
"(Per Priority) Group Counters", not "Per (Priority Group) Counters".
I attempted to distinguish this in the counter naming by calling these
`rx_discards_pg_N` rather than `rx_discards_prio_N` (which is the
naming scheme of the other counters in this PPCNT group).
I will also note that the mlx5 driver (which already has this counter)
uses the schme `rx_prioN_discards` (and same for the other counters
in this group). However, I was unable to determine whether the mlx5
counters behave the same as the mlxsw counters with respect to PG
mapping. An attempt to remap to a different PG there did not change
which counter incremented, but the mlx5 configuration code is quite
different, so it's possible the remapping needs to be done differently.
Signed-off-by: Keno Fischer <keno@juliahub.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/agqkMwgM1PdkyMUR@juliahub.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allison Henderson says:
====================
selftests: rds: Add ROCE support to rds selftests
Currently the rds selftests only tests the tcp transport. This means
most of rds_rdma.ko has no testing coverage. This series refactors the
rds self tests to add an rdma option when running tests. When used,
the test creates a pair of ROCE interfaces to run the payloads through.
Most of this set is refactoring the existing test.py module. Since most
of this code is one long procedure, it is difficult to modularize it
without creating a lot of pylint complaints about lengthy functions
with too many variables or branches.
Patch 1 fixes an RDS-IB shutdown hang exposed by the new ROCE selftests
in patches 10/11. The next seven patches break down test.py into helper
functions. After we have modularized the send/recv packet logic, we
introduce the new ROCE equivalent network configurations, add the new
command line flags to build and run the test with rdma support.
====================
Link: https://patch.msgid.link/20260518012443.2629206-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for testing rds rdma over ROCE. A new
-r flag is added to config.sh which enables the required kernel
configs for rdma. We also add a -T flag to run.sh, which takes
a transport option, tcp or rdma. The rdma option will check to
ensure the proper configs have been enabled. The flag is then
passed to test.py, which will run the test over the specified
transport(s)
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-12-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for testing rds rdma over ROCE in test.py
A new -T flag is added, which takes a transport option, tcp or rdma.
A new setup_rdma() function is added that will configure rdma
interfaces and sockets for use in the test case.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-11-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a teardown_tcp() helper that removes net0/net1.
The cmd calls here use fail=False so they can be called from
completed or partially-setup states on error. Also call
teardown_tcp() at the top of setup_tcp() so a previous
interrupted run does not leave net0/net1 lingering and break a
subsequent ip netns add. Register teardown_tcp() with atexit
before setup_tcp() is invoked.
Likewise, we can simpliy stop_pcaps() handling by registering it
with atexit instead of calling it from the signal handler.
atexit handlers run on any exit path - normal completion, raised
exception, and sys.exit() from the timeout signal handler. This
guarantees cleanup are called without further wrapping the test
body in a try/finally blocks.
atexit LIFO ordering keeps stop_pcaps before teardown_tcp so
tcpdumps are killed cleanly before their namespaces go away.
This is a preparatory cleanup for the upcoming ROCE patch which
will also register a teardown_rdma() alongside teardown_tcp()
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-10-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sockets created by child processes in netns_socket may raise
exceptions that are currently not handled by the parent. If for
example a namespace didn't exist or the rds module didn't load. Because
these exceptions occur with in a child thread, the child thread exits,
but the parent does not check the return status.
Further, allowing the child processes to quietly raise exceptions
will cause problems later if the parent registers clean up functions
with atexit. Since the child processes inherit the parents handlers,
they may prematurely call the parents cleanup routines without the
parent being aware.
Fix this by all catching exceptions raised by the child processes.
Child errors surface as a non-zero exit status, which are then
properly raised in the parent process.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-9-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the send/recv logic in test.py into a helper function,
snd_rcv_packets(). This is a preparatory refactoring for the
rds over ROCE series which can use the same function to run
the test over tcp, rdma, or both. No functional changes are
introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-8-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the verify hashes logic in test.py into a helper function,
verify_hashes(). This is a preparatory refactoring for the rds over
ROCE series that helps modularize the send/recv logic. Breaking up the
logic now will help avoid large function pylint errors later. No
functional changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-7-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist receive packet logic in test.py into a helper function,
recv_burst(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-6-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the send packet logic in test.py into a helper function,
send_burst(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-5-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the page info logic in test.py into a helper function,
check_info(). This is a preparatory refactoring for the rds over ROCE
series that helps modularize the send/recv logic. Breaking up the logic
now will help avoid large function pylint errors later. No functional
changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-4-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hoist the network configs in test.py into a tcp specific helper
function, setup_tcp(). This is a preparatory refactoring for the
rds over ROCE series which will add separate function for rdma
specific configs. No functional changes are introduced in this patch.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260518012443.2629206-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
am65_cpsw_nuss_ndo_slave_add_vid() returns early at the top with:
if (!netif_running(ndev) || !vid)
return 0;
so vid is guaranteed to be non-zero in the rest of the function. The
subsequent
if (!vid)
unreg_mcast = port_mask;
is therefore unreachable. Drop the dead branch.
With that branch gone, unreg_mcast is only ever its initializer value
of zero, so drop the variable and pass 0 directly to
cpsw_ale_vlan_add_modify().
No functional change.
Found by Smatch.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/aS_lhMwppbDHoEcX@stanley.mountain
Signed-off-by: Alexander Vassilevski <oss@vassilevski.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20260517220757.2679458-1-oss@vassilevski.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for configuring swapping of MDI pairs (ABCD->DCBA) when the
property "enet-phy-pair-order" is specified.
Unfortunately, no documentation about this feature is available, but
this implementation still tries to avoid magic numbers and raw register
numbers where it seems clear what is going on.
As it is unknown whether the patching step can be safely reversed, only
enabling MDI swapping is fully supported. A value of "0" for the "enet-
phy-pair-order" property is not accepted if the PHY has already been
patched for MDI swapping (however, this should not occur in practice).
Some other Realtek PHYs also support similar mechanisms:
- RTL8221B-VB-CG allows to configure MDI swapping via the same register,
but does not need the additional patching step. However, it is unclear
whether a driver implementation for that PHY is necessary, as it is
known to support configuration via strapping pins (which is working
fine at least in Zyxel XGS1210-12 rev B1).
- The patching step seems to match the one for the integrated PHYs of
some Realtek PCIe/USB NICs (see for example the r8152 driver).
For now, only implement this for the RTL8226-CG PHY, where it is needed
for the switches Zyxel XGS1010-12 rev A1 and XGS1210-12 rev A1.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://patch.msgid.link/20260516190456.387768-1-jan@3e8.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
