Convert struct rvu_block block to const struct rvu_block *block in
get_lf_str_list() function parameter. This improves efficiency by
avoiding structure copying and reflects the function's read-only
access to block.
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001110542.5404-2-riyandhiman14@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As per the SAMA5D2 device specification it supports Jumbo frames.
But the suggested flag and length of bytes it supports was not updated
in this driver config_structure.
The maximum jumbo frames the device supports:
10240 bytes as per the device spec.
While changing the MTU value greater than 1500, it threw error:
sudo ifconfig eth1 mtu 9000
SIOCSIFMTU: Invalid argument
Add this support to driver so that it works as expected and designed.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20241003171941.8814-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi says:
====================
net: airoha: Fix PSE memory configuration
Align PSE memory configuration to vendor SDK.
Increase initial value of PSE reserved memory in
airoha_fe_pse_ports_init() by the value used for the second Packet
Processor Engine (PPE2).
Do not overwrite the default value for the number of PSE reserved pages
in airoha_fe_set_pse_oq_rsv().
These changes fix issues which are not visible to the user.
v1: https://lore.kernel.org/20240930-airoha-eth-pse-fix-v1-0-f41f2f35abb9@kernel.org
====================
Link: https://patch.msgid.link/20241001-airoha-eth-pse-fix-v2-0-9a56cdffd074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Align PSE memory configuration to vendor SDK. In particular, increase
initial value of PSE reserved memory in airoha_fe_pse_ports_init()
routine by the value used for the second Packet Processor Engine (PPE2)
and do not overwrite the default value.
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001-airoha-eth-pse-fix-v2-2-9a56cdffd074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Store the default value for the number of PSE reserved pages in orig_val
at the beginning of airoha_fe_set_pse_oq_rsv routine, before updating it
with airoha_fe_set_pse_queue_rsv_pages().
Introduce airoha_fe_get_pse_all_rsv utility routine.
Introduced by commit 23020f0493 ("net: airoha: Introduce ethernet support
for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001-airoha-eth-pse-fix-v2-1-9a56cdffd074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Javier Carrasco says:
====================
net: switch to scoped device_for_each_child_node()
This series switches from the device_for_each_child_node() macro to its
scoped variant. This makes the code more robust if new early exits are
added to the loops, because there is no need for explicit calls to
fwnode_handle_put(), which also simplifies existing code.
The non-scoped macros to walk over nodes turn error-prone as soon as
the loop contains early exits (break, goto, return), and patches to
fix them show up regularly, sometimes due to new error paths in an
existing loop [1].
Note that the child node is now declared in the macro, and therefore the
explicit declaration is no longer required.
The general functionality should not be affected by this modification.
If functional changes are found, please report them back as errors.
Link: https://lore.kernel.org/20240901160829.709296395@linuxfoundation.org
v1: https://lore.kernel.org/r/20240930-net-device_for_each_child_node_scoped-v1-0-bbdd7f9fd649@gmail.com
====================
Link: https://patch.msgid.link/20240930-net-device_for_each_child_node_scoped-v2-0-35f09333c1d7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use device_for_each_child_node_scoped() to simplify the code by removing
the need for explicit calls to fwnode_handle_put() in every error path.
This approach also accounts for any error path that could be added.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240930-net-device_for_each_child_node_scoped-v2-2-35f09333c1d7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There has already been an issue with the handling of early exits from
device_for_each_child() in this driver, and it was solved with commit
b1de5c78eb ("net: mdio: thunder: Add missing fwnode_handle_put()") by
adding a call to fwnode_handle_put() right after the loop.
That solution is valid indeed, but if a new error path with a 'return'
is added to the loop, this solution will fail. A more secure approach
is using the scoped variant of the macro, which automatically
decrements the refcount of the child node when it goes out of scope,
removing the need for explicit calls to fwnode_handle_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240930-net-device_for_each_child_node_scoped-v2-1-35f09333c1d7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michal Schmidt says:
====================
qed: 'ethtool -d' faster, less latency
Here is a patch to make 'ethtool -d' on a qede network device a lot
faster and 3 patches to make it cause less latency for other tasks on
non-preemptible kernels.
====================
Link: https://patch.msgid.link/20240930201307.330692-1-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is OK to sleep in qed_dmae_operation_wait, because it is called only
in process context, while holding p_hwfn->dmae_info.mutex from one of
the qed_dmae_{host,grc}2{host,grc} functions.
The udelay(DMAE_MIN_WAIT_TIME=2) in the function is too short to replace
with usleep_range, but at least it's a suitable point for checking if we
should give up the CPU with cond_resched().
This lowers the latency caused by 'ethtool -d' from 10 ms to less than
2 ms on my test system with voluntary preemption.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20240930201307.330692-5-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qed_mcp_nvm_read has a loop where it calls qed_mcp_nvm_rd_cmd with the
argument b_can_sleep=false. And it sleeps once every 0x1000 bytes
read.
Simplify this by letting qed_mcp_nvm_rd_cmd itself sleep
(b_can_sleep=true). It will have slept at least once when successful
(in the "Wait for the MFW response" loop). So the extra sleep once every
0x1000 bytes becomes superfluous. Delete it.
On my test system with voluntary preemption, this lowers the latency
caused by 'ethtool -d' from 53 ms to 10 ms.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20240930201307.330692-4-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a kernel with preemption none or voluntary, 'ethtool -d'
on a qede network device can cause a big latency spike.
The biggest part of it is the loop in qed_grc_dump_ctx_data.
The function is called only from the .get_size and .perform_dump
callbacks for the "grc" feature defined in qed_features_lookup[].
As far as I can see, they are used in:
- qed's devlink healh reporter .dump op
- qede's ethtool get_regs/get_regs_len/get_dump_data ops
- qedf's qedf_get_grc_dump, called from:
- qedf_sysfs_write_grcdump - "grcdump" sysfs attribute write
- qedf_wq_grcdump - a workqueue
It is safe to sleep in all of them.
Let's insert a cond_resched() in the outer loop to let other tasks run.
Measured using this script:
#!/bin/bash
DEV=ens3f1
echo wakeup_rt > /sys/kernel/tracing/current_tracer
echo 0 > /sys/kernel/tracing/tracing_max_latency
echo 1 > /sys/kernel/tracing/tracing_on
echo "Setting the task CPU affinity"
taskset -p 1 $$ > /dev/null
echo "Starting the real-time task"
chrt -f 50 bash -c 'while sleep 0.01; do :; done' &
sleep 1
echo "Running: ethtool -d $DEV"
time ethtool -d $DEV > /dev/null
kill %1
echo 0 > /sys/kernel/tracing/tracing_on
echo "Measured latency: $(</sys/kernel/tracing/tracing_max_latency) us"
echo "To see the latency trace: less /sys/kernel/tracing/trace"
The patch lowers the latency from 180 ms to 53 ms on my test system with
voluntary preemption.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20240930201307.330692-3-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a side effect of commit 5401c3e099 ("qed: allow sleep in
qed_mcp_trace_dump()"), 'ethtool -d' became much slower.
Almost all the time is spent collecting the "mcp_trace".
It is caused by sleeping too long in _qed_mcp_cmd_and_union.
When called with sleeping not allowed, the function delays for 10 µs
between firmware polls. But if sleeping is allowed, it sleeps for 10 ms
instead.
The sleeps in _qed_mcp_cmd_and_union are unnecessarily long.
Replace msleep with usleep_range, which allows to achieve a similar
polling interval like in the no-sleeping mode (10 - 20 µs).
The only caller, qed_mcp_cmd_and_union, can stop doing the
multiplication/division of the usecs/max_retries. The polling interval
and the number of retries do not need to be parameters at all.
On my test system, 'ethtool -d' now takes 4 seconds instead of 44.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://patch.msgid.link/20240930201307.330692-2-mschmidt@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rosen Penev says:
====================
net: mv643xx: devm fixes
Small simplification and a fix for a seemingly wrong function usage.
====================
Link: https://patch.msgid.link/20240930202951.297737-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This clock should be optional. In addition, PTR_ERR can be -EPROBE_DEFER
in which case it should return.
devm_clk_get_optional_enabled also allows removing explicit clock enable
and disable calls.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240930202951.297737-3-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Effectively what's going on here is there's a main loop and an identical
one below with a single assignment. Simpler to move it up.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20240930181823.288892-6-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
alloc_ltalkdev in net/appletalk/dev.c is dead since
commit 00f3696f75 ("net: appletalk: remove cops support")
Removing it (and it's helper) leaves dev.c and if_ltalk.h empty;
remove them and the Makefile entry.
tun.c was including that if_ltalk.h but actually wanted
the uapi version for LTALK_ALEN, fix up the path.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow tracking of packets sent with send_subcrq direct vs
indirect. `ethtool -S <dev>` will now provide a counter
of the number of uses of each xmit method. This metric will
be useful in performance debugging.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001163531.1803152-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code seems to be handling EPROBE_DEFER explicitly and if there's no
error, enables the clock. clk_get_optional exists for that.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240930211628.330703-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Damato says:
====================
gve: Link IRQs, queues, and NAPI instances
This series uses the netdev-genl API to link IRQs and queues to NAPI IDs
so that this information is queryable by user apps. This is particularly
useful for epoll-based busy polling apps which rely on having access to
the NAPI ID.
I've tested these commits on a GCP instance with a GVE NIC configured
and have included test output in the commit messages for each patch
showing how to query the information.
[1]: https://lore.kernel.org/netdev/20240926030025.226221-1-jdamato@fastly.com/
====================
Link: https://patch.msgid.link/20240930210731.1629-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename ip_len to payload_len since the length in this case refers only
to the payload, and not the entire IP packet like for IPv4. While we're
at it, just use the variable directly when calling
recv_verify_packet_udp/tcp.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240930162935.980712-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test runs "devlink reload" explicitly. Instead, it is better to use
devlink_reload() which waits for udev events to be processed. Do not sleep
after reload, as devlink_reload() blocks until all the netdevs are renamed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/844509e3057b65277a7181a23c95b71ec95e8a56.1727706741.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'rds_ib_dereg_odp_mr' has been unused since the original
commit 2eafa1746f ("net/rds: Handle ODP mr
registration/unregistration").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20240930134358.48647-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
device_table in module_phy_driver macro is defined only when the
driver is built as a module. So a PHY driver imports phy::DeviceId
module in the following way then hits `unused import` warning when
it's compiled as built-in:
use kernel::net::phy::DeviceId;
kernel::module_phy_driver! {
drivers: [PhyQT2025],
device_table: [
DeviceId::new_with_driver::<PhyQT2025>(),
],
Put device_table in a const. It's not included in the kernel image if
unused (when the driver is compiled as built-in), and the compiler
doesn't complain.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20240930134038.1309-1-fujita.tomonori@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for link up and link down interrupts in lan887x.
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241001144421.6661-1-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guillaume Nault says:
====================
ipv4: Convert ip_route_input_slow() and its callers to dscp_t.
Prepare ip_route_input_slow() and its call chain to future conversion
of ->flowi4_tos.
The ->flowi4_tos field of "struct flowi4" is used in many different
places, which makes it hard to convert it from __u8 to dscp_t.
In order to avoid a big patch updating all its users at once, this
patch series gradually converts some users to dscp_t. Those users now
set ->flowi4_tos from a dscp_t variable that is converted to __u8 using
inet_dscp_to_dsfield().
When all users of ->flowi4_tos will use a dscp_t variable, converting
that field to dscp_t will just be a matter of removing all the
inet_dscp_to_dsfield() conversions.
This series concentrates on ip_route_input_slow() and its direct and
indirect callers.
====================
Link: https://patch.msgid.link/cover.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to ip_route_input_slow(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos.
Only ip_route_input_rcu() actually calls ip_route_input_slow(). Since
it already has a dscp_t variable to pass as parameter, we only need to
remove the inet_dscp_to_dsfield() conversion.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/d6bca5f87eea9e83a3861e6e05594cdd252583c9.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to ip_route_input_rcu(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input_rcu() to consider are:
* ip_route_input_noref(), which already has a dscp_t variable to pass
as parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* inet_rtm_getroute(), which receives a u8 from user space and needs
to convert it with inet_dsfield_to_dscp().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c4dbb5aa9cbc79c4fcb317abbffa7c7156bc56a7.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to ip_route_input_noref(), instead of a plain
u8, to prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input_noref() to consider are:
* arp_process() in net/ipv4/arp.c. This function sets the tos
parameter to 0, which is already a valid dscp_t value, so it
doesn't need to be adjusted for the new prototype.
* ip_route_input(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* ipvlan_l3_rcv(), bpf_lwt_input_reroute(), ip_expire(),
ip_rcv_finish_core(), xfrm4_rcv_encap_finish() and
xfrm4_rcv_encap(), which get the DSCP directly from IPv4 headers
and can simply use the ip4h_dscp() helper.
While there, declare the IPv4 header pointers as const in
ipvlan_l3_rcv() and bpf_lwt_input_reroute().
Also, modify the declaration of ip_route_input_noref() in
include/net/route.h so that it matches the prototype of its
implementation in net/ipv4/route.c.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/a8a747bed452519c4d0cc06af32c7e7795d7b627.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to ip_route_input(), instead of a plain u8, to
prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input() to consider are:
* input_action_end_dx4_finish() and input_action_end_dt4() in
net/ipv6/seg6_local.c. These functions set the tos parameter to 0,
which is already a valid dscp_t value, so they don't need to be
adjusted for the new prototype.
* icmp_route_lookup(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* br_nf_pre_routing_finish(), ip_options_rcv_srr() and ip4ip6_err(),
which get the DSCP directly from IPv4 headers. Define a helper to
read the .tos field of struct iphdr as dscp_t, so that these
function don't have to do the conversion manually.
While there, declare *iph as const in br_nf_pre_routing_finish(),
declare its local variables in reverse-christmas-tree order and move
the "err = ip_route_input()" assignment out of the conditional to avoid
checkpatch warning.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/e9d40781d64d3d69f4c79ac8a008b8d67a033e8d.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass a dscp_t variable to icmp_route_lookup(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos. Rename that
variable ("tos" -> "dscp") to make the intent clear.
While there, reorganise the function parameters to fill up horizontal
space.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/294fead85c6035bcdc5fcf9a6bb4ce8798c45ba1.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mix netns into all IPv4 FIB hashes to avoid massive collision when
inserting the same address in many netns.
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241001231438.3855035-1-alexandre.ferrieux@orange.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Damato says:
====================
ena: Link IRQs, queues, and NAPI instances
This series uses the netdev-genl API to link IRQs and queues to NAPI IDs
so that this information is queryable by user apps. This is particularly
useful for epoll-based busy polling apps which rely on having access to
the NAPI ID.
I've tested these commits on an EC2 instance with an ENA NIC configured
and have included test output in the commit messages for each patch
showing how to query the information.
I noted in the implementation that the driver requests an IRQ for
management purposes which does not have an associated NAPI. I tried
to take this into account in patch 1, but would appreciate if ENA
maintainers can verify I did this correctly.
v1: https://lore.kernel.org/all/20240930195617.37369-1-jdamato@fastly.com/
====================
Link: https://patch.msgid.link/20241002001331.65444-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link IRQs to NAPI instances with netif_napi_set_irq. This information
can be queried with the netdev-genl API. Note that the ENA device
appears to allocate an IRQ for management purposes which does not have a
NAPI associated with it; this commit takes this into consideration to
accurately construct a map between IRQs and NAPI instances.
Compare the output of /proc/interrupts for my ena device with the output of
netdev-genl after applying this patch:
$ cat /proc/interrupts | grep enp55s0 | cut -f1 --delimiter=':'
94
95
96
97
98
99
100
101
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'id': 8208, 'ifindex': 2, 'irq': 101},
{'id': 8207, 'ifindex': 2, 'irq': 100},
{'id': 8206, 'ifindex': 2, 'irq': 99},
{'id': 8205, 'ifindex': 2, 'irq': 98},
{'id': 8204, 'ifindex': 2, 'irq': 97},
{'id': 8203, 'ifindex': 2, 'irq': 96},
{'id': 8202, 'ifindex': 2, 'irq': 95},
{'id': 8201, 'ifindex': 2, 'irq': 94}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20241002001331.65444-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
packing: various improvements and KUnit tests
This series contains a handful of improvements and fixes for the packing
library, including the addition of KUnit tests.
There are two major changes which might be considered bug fixes:
1) The library is updated to handle arbitrary buffer lengths, fixing
undefined behavior when operating on buffers which are not a multiple
of 4 bytes.
2) The behavior of QUIRK_MSB_ON_THE_RIGHT is fixed to match the intended
behavior when operating on packings that are not byte aligned.
These are not sent to net because no driver currently depends on this
behavior. For (1), the existing users of the packing API all operate on
buffers which are multiples of 4-bytes. For (2), no driver currently uses
QUIRK_MSB_ON_THE_RIGHT. The incorrect behavior was found while writing
KUnit tests.
This series also includes a handful of minor cleanups from Vladimir, as
well as a change to introduce a separated pack() and unpack() API. This API
is not (yet) used by a driver, but is the first step in implementing
pack_fields() and unpack_fields() which will be used in future changes for
the ice driver and changes Vladimir has in progress for other drivers using
the packing API.
This series is part 1 of a 2-part series for implementing use of
lib/packing in the ice driver. The 2nd part includes a new pack_fields()
and unpack_fields() implementation inspired by the ice driver's existing
bit packing code. It is built on top of the split pack() and unpack()
code. Additionally, the KUnit tests are built on top of pack() and
unpack(), based on original selftests written by Vladimir.
Fitting the entire library changes and drivers changes into a single series
exceeded the usual series limits.
v1: https://lore.kernel.org/r/20240930-packing-kunit-tests-and-split-pack-unpack-v1-0-94b1f04aca85@intel.com
====================
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-0-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The QUIRK_MSB_ON_THE_RIGHT quirk is intended to modify pack() and unpack()
so that the most significant bit of each byte in the packed layout is on
the right.
The way the quirk is currently implemented is broken whenever the packing
code packs or unpacks any value that is not exactly a full byte.
The broken behavior can occur when packing any values smaller than one
byte, when packing any value that is not exactly a whole number of bytes,
or when the packing is not aligned to a byte boundary.
This quirk is documented in the following way:
1. Normally (no quirks), we would do it like this:
::
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
7 6 5 4
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
3 2 1 0
<snip>
2. If QUIRK_MSB_ON_THE_RIGHT is set, we do it like this:
::
56 57 58 59 60 61 62 63 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47 32 33 34 35 36 37 38 39
7 6 5 4
24 25 26 27 28 29 30 31 16 17 18 19 20 21 22 23 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7
3 2 1 0
That is, QUIRK_MSB_ON_THE_RIGHT does not affect byte positioning, but
inverts bit offsets inside a byte.
Essentially, the mapping for physical bit offsets should be reserved for a
given byte within the payload. This reversal should be fixed to the bytes
in the packing layout.
The logic to implement this quirk is handled within the
adjust_for_msb_right_quirk() function. This function does not work properly
when dealing with the bytes that contain only a partial amount of data.
In particular, consider trying to pack or unpack the range 53-44. We should
always be mapping the bits from the logical ordering to their physical
ordering in the same way, regardless of what sequence of bits we are
unpacking.
This, we should grab the following logical bits:
Logical: 55 54 53 52 51 50 49 48 47 45 44 43 42 41 40 39
^ ^ ^ ^ ^ ^ ^ ^ ^
And pack them into the physical bits:
Physical: 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47
Logical: 48 49 50 51 52 53 44 45 46 47
^ ^ ^ ^ ^ ^ ^ ^ ^ ^
The current logic in adjust_for_msb_right_quirk is broken. I believe it is
intending to map according to the following:
Physical: 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47
Logical: 48 49 50 51 52 53 44 45 46 47
^ ^ ^ ^ ^ ^ ^ ^ ^ ^
That is, it tries to keep the bits at the start and end of a packing
together. This is wrong, as it makes the packing change what bit is being
mapped to what based on which bits you're currently packing or unpacking.
Worse, the actual calculations within adjust_for_msb_right_quirk don't make
sense.
Consider the case when packing the last byte of an unaligned packing. It
might have a start bit of 7 and an end bit of 5. This would have a width of
3 bits. The new_start_bit will be calculated as the width - the box_end_bit
- 1. This will underflow and produce a negative value, which will
ultimate result in generating a new box_mask of all 0s.
For any other values, the result of the calculations of the
new_box_end_bit, new_box_start_bit, and the new box_mask will result in the
exact same values for the box_end_bit, box_start_bit, and box_mask. This
makes the calculations completely irrelevant.
If box_end_bit is 0, and box_start_bit is 7, then the entire function of
adjust_for_msb_right_quirk will boil down to just:
*to_write = bitrev8(*to_write)
The other adjustments are attempting (incorrectly) to keep the bits in the
same place but just reversed. This is not the right behavior even if
implemented correctly, as it leaves the mapping dependent on the bit values
being packed or unpacked.
Remove adjust_for_msb_right_quirk() and just use bitrev8 to reverse the
byte order when interacting with the packed data.
In particular, for packing, we need to reverse both the box_mask and the
physical value being packed. This is done after shifting the value by
box_end_bit so that the reversed mapping is always aligned to the physical
buffer byte boundary. The box_mask is reversed as we're about to use it to
clear any stale bits in the physical buffer at this block.
For unpacking, we need to reverse the contents of the physical buffer
*before* masking with the box_mask. This is critical, as the box_mask is a
logical mask of the bit layout before handling the QUIRK_MSB_ON_THE_RIGHT.
Add several new tests which cover this behavior. These tests will fail
without the fix and pass afterwards. Note that no current drivers make use
of QUIRK_MSB_ON_THE_RIGHT. I suspect this is why there have been no reports
of this inconsistency before.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-8-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reviewing the initial KUnit tests for lib/packing, Przemek pointed
out that the test values have duplicate bytes in the input sequence.
In addition, I noticed that the unit tests pack and unpack on a byte
boundary, instead of crossing bytes. Thus, we lack good coverage of the
corner cases of the API.
Add additional unit tests to cover packing and unpacking byte buffers which
do not have duplicate bytes in the unpacked value, and which pack and
unpack to an unaligned offset.
A careful reviewer may note the lack tests for QUIRK_MSB_ON_THE_RIGHT. This
is because I found issues with that quirk during test implementation. This
quirk will be fixed and the tests will be included in a future change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-7-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 24 simple KUnit tests for the lib/packing.c pack() and unpack() APIs.
The first 16 tests exercise all combinations of quirks with a simple magic
number value on a 16-byte buffer. The remaining 8 tests cover
non-multiple-of-4 buffer sizes.
These tests were originally written by Vladimir as simple selftest
functions. I adapted them to KUnit, refactoring them into a table driven
approach. This will aid in adding additional tests in the future.
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-6-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
packing() is now used in some hot paths, and it would be good to get rid
of some ifs and buts that depend on "op", to speed things up a little bit.
With the main implementations now taking size_t endbit, we no longer
have to check for negative values. Update the local integer variables to
also be size_t to match.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-5-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
