Drop the unused drm_panel field from the mchp_lvds structure, and remove
the unnecessary port device node lookup, as devm_drm_of_get_bridge()
already performs the required checks internally.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250625-microchip-lvds-v6-1-7ce91f89d35a@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
This reverts commit e3953ff665.
Seems to have been accidentally pushed without mandatory review.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
Acked-by: Maxime Ripard <mripard@kernel.org> #irc
The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks
for both runtime PM and system sleep. This causes the DSI clocks to be
disabled twice: once during runtime suspend and again during system
suspend, resulting in a WARN message from the clock framework when
attempting to disable already-disabled clocks.
[ 84.384540] clk:231:5 already disabled
[ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac
...
[ 84.579183] Call trace:
[ 84.581624] clk_core_disable+0xa4/0xac
[ 84.585457] clk_disable+0x30/0x4c
[ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi]
[ 84.593651] pm_generic_suspend+0x2c/0x44
[ 84.597661] ti_sci_pd_suspend+0xbc/0x15c
[ 84.601670] dpm_run_callback+0x8c/0x14c
[ 84.605588] __device_suspend+0x1a0/0x56c
[ 84.609594] dpm_suspend+0x17c/0x21c
[ 84.613165] dpm_suspend_start+0xa0/0xa8
[ 84.617083] suspend_devices_and_enter+0x12c/0x634
[ 84.621872] pm_suspend+0x1fc/0x368
To address this issue, replace UNIVERSAL_DEV_PM_OPS() with
RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime
PM, as the DRM framework manages system-wide power transitions through
the bridge enable() and disable() hooks.
Link: https://lore.kernel.org/all/fbde0659-78f3-46e4-98cf-d832f765a18b@ideasonboard.com/
Cc: stable@vger.kernel.org # 6.1.x
Fixes: e19233955d ("drm/bridge: Add Cadence DSI driver")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260505134705.188661-2-ivitro@gmail.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The zynqmp-dpsub driver does not have build time dependencies on the PHY
or DMA drivers. These are runtime hardware restrictions.
Make the two dependencies optional if COMPILE_TEST.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260505094716.1784225-1-wenst@chromium.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
In case of error, we should unwind correctly.
Switching to using dmam_ instead of dma_ and moving the code earlier
fixes the issue.
Fixes: 6f392f3716 ("drm: renesas: rz-du: Implement MIPI DSI host transfers")
Suggested-by: Pavel Machek <pavel@nabladev.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260501132135.196701-1-chris.brandt@renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
On the RZ/G3L SMARC EVK, suspend to RAM powers down the ITE IT6263 chip.
The display controller driver's system PM callbacks invoke
drm_mode_config_helper_{suspend,resume}, which in turn call the bridge's
atomic_{disable,enable} callbacks to handle suspend/resume for the bridge
without dedicated PM ops.
To support proper reinitialization after power loss, move reset_gpio into
the it6263 struct so it is accessible beyond probe time. Relocate
it6263_hw_reset(), it6263_lvds_set_i2c_addr(), it6263_lvds_config() and
it6263_hdmi_config() from probe to atomic_enable, ensuring the chip is
fully reset and reconfigured on every enable, including after a
suspend/resume cycle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260501061200.20129-1-biju.das.jz@bp.renesas.com
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Add support for allocating buffers from reserved carveout memory when
IOMMU is not available. This is useful during debugging or bring-up.
In this configuration, the device uses physical addresses and does
not support scatter-gather lists, requiring physically contiguous
buffers.
Implement carveout-backed allocation and integrate it into buffer
management to support operation in physical address mode.
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260427170949.2666601-1-lizhi.hou@amd.com
Update the maintainer from Adrien to Francesco. Adrien is not
interested in maintaining this driver anymore, Francesco has access to
various hardware devices using this component and the vendor
documentation.
Cc: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260430085344.34271-1-francesco@dolcini.it
I am actively working on drm_bridge.c and recently also
drm_bridge_connector.c, especially for the DRM bridge hotplug work. Being
in Cc would ensure I won't miss related patches and can review them
promptly.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260430-maintainers-add-r-drm_bridge-v1-1-3e2523faf349@bootlin.com
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Fixes: 779679d3c1 ("drm/panel: Add support for S6E3HA8 panel driver")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505-panel-clean-up-kconfig-dep-v2-3-9cc31d6e6919@ixit.cz
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Fixes: 88148c30ef ("drm/panel: Add Samsung S6E3FC2X01 DDIC with AMS641RW panel")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505-panel-clean-up-kconfig-dep-v2-2-9cc31d6e6919@ixit.cz
As per the config name this Display IC features a DSI command-mode
interface (or the command to switch to video mode is not
known/documented) and does not use any of the video-mode helper
utilities, hence should not select VIDEOMODE_HELPERS. In addition it
uses devm_gpiod_get() and related functions from GPIOLIB.
Fixes: 5933baa36e ("drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devices")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260505-panel-clean-up-kconfig-dep-v2-1-9cc31d6e6919@ixit.cz
The function drm_of_get_data_lanes_count_remote() returns negative error
codes and dsi->lanes is an unsigned integer, so the check (dsi->lanes <
0) is always impossible.
Detected by Smatch:
drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c:2959 jadard_dsi_probe()
warn: unsigned 'dsi->lanes' is never less than zero.
Fixes: eb019688f2 ("drm/panel: jadard-jd9365da-h3: support variable DSI configuration")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260429024954.697411-1-ethantidmore06@gmail.com
The devm_drm_panel_alloc() function returns an error pointer on failure,
not NULL. Fix the check to use IS_ERR() and return PTR_ERR() to
correctly handle allocation failures.
Fixes: 07853e9542 ("drm/panel: add driver for Waveshare 8.8" DSI TOUCH-A panel")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260429080527.1456732-1-nichen@iscas.ac.cn
Add support for Y8 and XYYY2101010 formats. We also need to add new csc
matrices for these y-only formats.
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-9-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Use drm helpers, drm_format_info_plane_width(),
drm_format_info_plane_height() and drm_format_info_min_pitch() to
calculate sizes for the DMA.
This cleans up the code, but also makes it possible to support more
complex formats (like P030, P230).
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-7-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add XVUY2101010, a 10 bits per component YCbCr format in a 32 bit
container.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-6-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add T430, a 3 plane 10 bits per component non-subsampled YCbCr format.
A new initial letter was chosen for this one, as the format doesn't
match the existing P, Q or S formats. T is the next one in the alphabet.
It was definitely not chosen because of the initial letter in the
author's name.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-5-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add XYYY2101010 ("YPA4"), a 10 bit greyscale format, with 3 pixels
packed into 32-bit container, and two bits of padding.
The fourcc for the format is 'YPA4', which comes from Y - Y only, P -
packed, A - 10 (as in 0xA), 4 - 4 bytes.
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-4-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add greyscale Y8 format.
The 8-bit greyscale format has been discussed before, and the earlier
guidance was to use DRM_FORMAT_R8, as a single-channel 8-bit pixel.
However, adding DRM_FORMAT_Y8 makes sense, we can mark it as 'is_yuv' in
the drm_format_info, and this can help the drivers handle e.g.
full/limited range. This will distinguish two single-channel formats:
R8, which is a RGB format with the same value for all components, and
Y8, which is a Y-only YCbCr format, with Cb and Cr being neutral.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-3-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Add a new pixel format, DRM_FORMAT_P230 ("P230")
P230 is 2 plane 10 bit per component YCbCr 2x1 subsampled format. P230
is similar to the already existing P030 format, which is 2x2 subsampled.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vishal Sagar <vishal.sagar@amd.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-2-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
drm_format_info_bpp() cannot be used for formats which do not have an
integer bits-per-pixel in a pixel block.
E.g. DRM_FORMAT_P030's plane 0 has three 10-bit pixels (Y components),
and two padding bits, in a 4 byte block. That is 10.666... bits per
pixel when considering the whole 4 byte block, which is what
drm_format_info_bpp() does. Thus a driver that supports such formats
cannot use drm_format_info_bpp(),
It is a driver bug if this happens, but so handle wrong calls by
printing a warning and returning 0.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Simon Ser <contact@emersion.fr>
Link: https://patch.msgid.link/20260423-xilinx-formats-v10-1-c690c2b8ea89@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
A local helper was developed previously for struct_size.
kzalloc_flex can be used now.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260320010757.32158-1-rosenp@gmail.com
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Add device tree binding documentation for the Team Source Display
TST070WSBE-196C, a 7" 1024x600 MIPI-DSI TFT LCD panel
using an EK79007AD controller.
Signed-off-by: William Bright <william.bright@imd-tec.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260428-imdt-dsi-display-v2-1-cf7294b5d7d6@imd-tec.com
This is used by the AYN Thor for the bottom panel.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260426-ch13726a-v7-2-554247c569e5@gmail.com
The Chip Wealth Technology CH13726A AMOLED driver is a single chip
solution for MIPI-DSI. This is used for the AYN Thor bottom panel.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260426-ch13726a-v7-1-554247c569e5@gmail.com
Document Novatek NT35532-based DSI display panel.
Since it's not possible to identify panel vendor nor id, add a suitable
compatible (matching the device's user, which makes use of this DDIC)
and set "novatek,nt35532" as fallback.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260331-rimob-new-features-v5-1-5fcf42a29c12@protonmail.com
tve200_modeset_init() creates a panel bridge and initializes the DRM
mode config before tve200_probe() registers the DRM device. If
drm_dev_register() fails, probe returns an error and the driver's remove
callback is not called, so those modeset resources are left behind.
Unwind the panel bridge and mode config on that failure path before
disabling the clock and dropping the DRM device reference.
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260424124118.38649-1-mhun512@gmail.com
Amdgpu was the only user of the signal on any feature and we dropped
that use case recently, so we can remove that functionality.
v2: update num_pending only after the fence is signaled
v3: separate out simplifying dma_fence_array implementation
v4: fix XE patch split fallout
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20260422103012.1647-1-christian.koenig@amd.com
The DRM core uAPI headers are licensed under the MIT license, and carry
copies of the license with slight variations. Replace them with SPDX
headers.
Following a discussion with Simona Vetter on this topic, add a
clarification in the drm-uapi.rst file that independent closed-source
userspace implementations of software using the DRM uAPI are accepted,
as allowed by the MIT license.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260407104951.1781047-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251104111339.128685-1-marco.crivellari@suse.com
Set PM ops for the vesadrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-6-tzimmermann@suse.de
Set PM ops for the simpledrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-5-tzimmermann@suse.de
Set PM ops for the ofdrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-4-tzimmermann@suse.de
Set PM ops for the efidrm driver. Suspend and resume the DRM state
on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-3-tzimmermann@suse.de
Set PM ops for the corebootdrm driver. Suspend and resume the DRM
state on systems that support it.
Many systems lose the hardware's framebuffer settings on suspend,
hence resuming doesn't work there. Yet some systems, most notably
emulators, keep the hardware state across suspend/resume cycles.
There, DRM's suspend and resume helpers bring back the display on
resume.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260408120722.328769-2-tzimmermann@suse.de
