Move psr related module parameters under display. Also fix error in
enable_psr2_sel_fetch module parameter descrtiption. It was saying disabled
by default while it's vice versa. Also psr_safest_params was missing
default value in description. This is now added.
v2:
- Fix enable_psr2_sel_fetch description.
- Add default value into psr_safest_params description.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-5-jouni.hogander@intel.com
GPU error dump contained all module parameters. If we are moving
display parameters to intel_display_params.[ch] they are not dumped
into GPU error dump. This patch is adding moved display parameters
back to GPU error dump. Display parameters are also included in
i915_capabilities
v2: Add parameters to i915_capabilities as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-3-jouni.hogander@intel.com
Currently all module parameters are handled by i915_param.c/h. This
is a problem for display parameters when Xe driver is used. Add
a mechanism to add parameters specific to the display. This is mainly
copied from i915_[debugfs]_params.[ch]. Parameters are not yet moved. This
is done by subsequent patches.
v2:
- Drop unused predefinition (dentry)
- Clarify need for empty INTEL_DISPLAY_PARAMS_FOR_EACH in comment
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-2-jouni.hogander@intel.com
Create a separate debugfs entry to list the display capabilities
IGT can rely on this debugfs entry for tests that depend on
display device and display runtime info for both xe and i915
drivers.
v2: rename the entry to i915_display_capabilities (Chaitanya)
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018102723.16915-2-vinod.govindapillai@intel.com
Add separate macros for VLV/CHV registers without the implicit dev_priv,
and with the display MMIO base baked in.
A number of implicitly used dev_priv local variables can be removed.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011201533.1081368-1-jani.nikula@intel.com
As a preparation for Xe we want to remove all i915_gem_object details away
from frontbuffer tacking code. Due to this move releasing gem object
reference to i915_gem_object_set_frontbuffer.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012072158.4115795-2-jouni.hogander@intel.com
Meteor Lake has demonstrated consistent stability for some time.
All user-space API modifications tide to its core platform
functions are operational.
The necessary firmware components are set up and comprehensive
testing has been condused over a period.
Given the recent faborable CI results, as well, we believe it's
time to eliminate the 'force_probe' prerequisite and activate the
platform by default.
Signed-off-by: Aditya Chauhan <aditya.chauhan@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Tested-by: Karthik B S <karthik.b.s@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008164824.919262-1-andi.shyti@linux.intel.com
The previous patches converted all users of the DSC DPCD caps to look
these up from the connector, so remove the version stored in intel_dp.
A follow-up patchset will read out the MST connector specific
capabilities in intel_dp_add_mst_connector() ->
intel_dp_mst_read_decompression_port_dsc_caps().
v2:
- Rebased on intel_edp_get_dsc_sink_cap() addition in the patchset.
v3:
- Rebased on read-out fix for eDP in the patchset.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-3-imre.deak@intel.com
Use the connector's DSC DPCD capabilities in intel_dp_dsc_compute_max_bpp()
instead of the version stored in the encoder.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-7-imre.deak@intel.com
Use the connector's DSC DPCD capabilities in i915_dsc_fec_support_show()
instead of the version stored in the encoder. Atm the two are identical,
but a follow-up patch will store the (MST) connector specific version
in the connector.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-6-imre.deak@intel.com
Cache the i915 specific device and connector pointers in
i915_dsc_fec_support_show().
v2:
- s/Cahce/Cache typo in commit log. (Stan)
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231006133727.1822579-5-imre.deak@intel.com
Similarly to eDP and SST-DP connectors read out the DSC capabilities for
MST connectors as well. Atm these will match the root port's DSC caps
and only used after a follow-up change enables the decompression for
each stream separately (vs. the current way of enabling it only globally
in the first branch device downstream of the root port).
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010112504.2156789-3-imre.deak@intel.com
In an MST topology the DSC capabilities are specific to each connector,
retrieved either from the sink if it decompresses the stream, or from a
branch device between the source and the sink in case this branch device
does the decompression. Accordingly each connector needs to cache its
own DSC DPCD and FEC capabilities, along with the AUX device through
which the decompression can be enabled. This patch prepares for that by
storing the capabilities and the DSC AUX device in the connector, for
now these just matching the version stored in intel_dp. The follow-up
patches will convert all users to look up these in the connector instead
of intel_dp, after which the intel_dp copies are removed.
v2:
- Rebased on intel_edp_get_dsc_sink_cap() addition in previous patch.
v3:
- Rebased on read-out fix for eDP in previous patch.
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-2-imre.deak@intel.com
Check only the eDP or the DP specific DPCD revision depending on the
sink type. Pass the corresponding revision to the function, which allows
getting the DSC caps of a branch device (in an MST topology, which has
its own DPCD and so DPCD revision).
While at it use DP_DPCD_REV_14 instead of open coding it and for clarity
add a separate function to read out the DSC capability on eDP.
v2:
- Use DP_DPCD_REV_14 instead of open coding it. (Stan)
- Check EDP_DCPD_REV/DPCD_REV in a clearer way. (Ville)
v3:
- Fix the read-out for eDP in intel_dp_detect().
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> (v1)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v2)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011171606.2540078-1-imre.deak@intel.com
The display engine does not snoop the caches so we should mark
the DSB command buffer as I915_CACHE_NONE.
i915_gem_object_create_internal() always gives us I915_CACHE_LLC
on LLC platforms. And to make things 100% correct we should also
clflush at the end, if necessary.
Note that currently this is a non-issue as we always write the
command buffer through a WC mapping, so a cache flush is not actually
needed. But we might actually want to consider a WB mapping since
we also end up reading from the command buffer (in the indexed
reg write handling). Either that or we should do something else
to avoid those reads (might actually be even more sensible on DGFX
since we end up reading over PCIe). But we should measure the overhead
first...
Anyways, no real harm in adding the belts and suspenders here so
that the code will work correctly regardless of how we map the
buffer. If we do get a WC mapping (as we request)
i915_gem_object_flush_map() will be a nop. Well, apart form
a wmb() which may just flush the WC buffer a bit earlier
than would otherwise happen (at the latest the mmio accesses
would trigger the WC flush).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009132204.15098-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Using system memory for the DSB command buffer doesn't appear to work.
On DG2 it seems like the hardware internally replaces the actual memory
reads with zeroes, and so we end up executing a bunch of NOOPs instead
of whatever commands we put in the buffer. To determine that I measured
the time it takes to execute the instructions, and the results are
always more or less consistent with executing a buffer full of NOOPs
from local memory.
Another theory I considered was some kind of cache coherency issue.
Looks like i915_gem_object_pin_map_unlocked() will in fact give you a
WB mapping for system memory on DGFX regardless of what mapping mode
was requested (WC in case of the DSB code). But clflush did not
change the behaviour at all, so that theory seems moot.
On DG1 it looks like the hardware might actually be fetching data from
system memory as the logs indicate that we just get underruns. But that
is equally bad, so doesn't look like we can really use system memory on
DG1 either.
Thus always allocate the DSB command buffer from local memory on
discrete GPUs.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231009132204.15098-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Watchdog timers for Lunarlake HW were removed for PSR/PSR2
The patch removes the use of these timers from the driver code.
BSpec: 69895
v2: Reword commit message (Ville)
Drop HPD mask from LNL (Ville)
Revise masking logic (Jouni)
v3: Revise commit message (Ville)
Revert HPD mask removal as irrelevant for this patch (Ville)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231010095233.590613-1-mika.kahola@intel.com
On the Lenovo Yoga Tab 3 Pro YT3-X90F there are 2 issues with the backlight
on/off MIPI sequences:
1. The backlight on sequence has an I2C MIPI sequence element which uses
bus 0, but there is a bogus I2cSerialBus resource under the GPU in
the DSDT which causes i2c_acpi_find_adapter() to pick the wrong bus.
2. There is no backlight off sequence, causing the backlight to stay on.
Add a DMI quirk fixing both issues.
v2:
- Add Closes tag to gitlab issue with drm.debug=0xe, VBT info
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9380
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920195613.304091-4-hdegoede@redhat.com
