Only small fixes.
- ASoC Cirrus codec fixes
- A regression fix for the recent TAS2781 codec refactoring
- A fix for user-timer error handling
- Fixes for USB-audio descriptor validators
- Usual HD-audio and ASoC device-specific quirks
-----BEGIN PGP SIGNATURE-----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=myx0
-----END PGP SIGNATURE-----
Merge tag 'sound-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only small fixes.
- ASoC Cirrus codec fixes
- A regression fix for the recent TAS2781 codec refactoring
- A fix for user-timer error handling
- Fixes for USB-audio descriptor validators
- Usual HD-audio and ASoC device-specific quirks"
* tag 'sound-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Use correct sub-type for UAC3 feature unit validation
ALSA: timer: fix ida_free call while not allocated
ASoC: cs35l56: Remove SoundWire Clock Divider workaround for CS35L63
ASoC: cs35l56: Handle new algorithms IDs for CS35L63
ASoC: cs35l56: Update Firmware Addresses for CS35L63 for production silicon
ALSA: hda: tas2781: Fix wrong reference of tasdevice_priv
ALSA: hda/realtek: Audio disappears on HP 15-fc000 after warm boot again
ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14
ASoC: codecs: ES9389: Modify the standby configuration
ALSA: usb-audio: Fix size validation in convert_chmap_v3()
ALSA: hda/tas2781: Add name prefix tas2781 for tas2781's dvc_tlv and amp_vol_tlv
ALSA: hda/realtek: Add support for HP EliteBook x360 830 G6 and EliteBook 830 G6
Stable fixes:
- NFS: Fix a data corrupting race when updating an existing write
-----BEGIN PGP SIGNATURE-----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=Yh2D
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fix from Trond Myklebust:
- NFS: Fix a data corrupting race when updating an existing write
* tag 'nfs-for-6.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a race when updating an existing write
or aren't considered necessary for -stable kernels. 17 of these fixes are
for MM.
As usual, singletons all over the place, apart from a three-patch series
of KHO followup work from Pasha which is actually also a bunch of
singletons.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaKfFVwAKCRDdBJ7gKXxA
jvZGAQCCRTRgwnYsH0op9Rlxs72zokENbErSzXweWLez31pNpAD/S7bVSjjk1mXr
BQ24ZadKUUomWkghwCusb9VomMeneg0=
=+uBT
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 10 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 17 of these
fixes are for MM.
As usual, singletons all over the place, apart from a three-patch
series of KHO followup work from Pasha which is actually also a bunch
of singletons"
* tag 'mm-hotfixes-stable-2025-08-21-18-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mremap: fix WARN with uffd that has remap events disabled
mm/damon/sysfs-schemes: put damos dests dir after removing its files
mm/migrate: fix NULL movable_ops if CONFIG_ZSMALLOC=m
mm/damon/core: fix damos_commit_filter not changing allow
mm/memory-failure: fix infinite UCE for VM_PFNMAP pfn
MAINTAINERS: mark MGLRU as maintained
mm: rust: add page.rs to MEMORY MANAGEMENT - RUST
iov_iter: iterate_folioq: fix handling of offset >= folio size
selftests/damon: fix selftests by installing drgn related script
.mailmap: add entry for Easwar Hariharan
selftests/mm: add test for invalid multi VMA operations
mm/mremap: catch invalid multi VMA moves earlier
mm/mremap: allow multi-VMA move when filesystem uses thp_get_unmapped_area
mm/damon/core: fix commit_ops_filters by using correct nth function
tools/testing: add linux/args.h header and fix radix, VMA tests
mm/debug_vm_pgtable: clear page table entries at destroy_args()
squashfs: fix memory leak in squashfs_fill_super
kho: warn if KHO is disabled due to an error
kho: mm: don't allow deferred struct page with KHO
kho: init new_physxa->phys_bits to fix lockdep
The riscv_iommu_pte_fetch() function returns either NULL for
unmapped/never-mapped iova, or a valid leaf pte pointer that
requires no further validation.
riscv_iommu_iova_to_phys() failed to handle NULL returns.
Prevent null pointer dereference in
riscv_iommu_iova_to_phys(), and remove the pte validation.
Fixes: 488ffbf181 ("iommu/riscv: Paging domain support")
Cc: Tomasz Jeznach <tjeznach@rivosinc.com>
Signed-off-by: XianLiang Huang <huangxianliang@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250820072248.312-1-huangxianliang@lanxincomputing.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Much like arm-smmu in commit 7d835134d4 ("iommu/arm-smmu: Make
instance lookup robust"), virtio-iommu appears to have the same issue
where iommu_device_register() makes the IOMMU instance visible to other
API callers (including itself) straight away, but internally the
instance isn't ready to recognise itself for viommu_probe_device() to
work correctly until after viommu_probe() has returned. This matters a
lot more now that bus_iommu_probe() has the DT/VIOT knowledge to probe
client devices the way that was always intended. Tweak the lookup and
initialisation in much the same way as for arm-smmu, to ensure that what
we register is functional and ready to go.
Cc: stable@vger.kernel.org
Fixes: bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/308911aaa1f5be32a3a709996c7bd6cf71d30f33.1755190036.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The arm_smmu_attach_commit() updates master->ats_enabled before calling
arm_smmu_remove_master_domain() that is supposed to clean up everything
in the old domain, including the old domain's nr_ats_masters. So, it is
supposed to use the old ats_enabled state of the device, not an updated
state.
This isn't a problem if switching between two domains where:
- old ats_enabled = false; new ats_enabled = false
- old ats_enabled = true; new ats_enabled = true
but can fail cases where:
- old ats_enabled = false; new ats_enabled = true
(old domain should keep the counter but incorrectly decreased it)
- old ats_enabled = true; new ats_enabled = false
(old domain needed to decrease the counter but incorrectly missed it)
Update master->ats_enabled after arm_smmu_remove_master_domain() to fix
this.
Fixes: 7497f4211f ("iommu/arm-smmu-v3: Make changing domains be hitless for ATS")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Link: https://lore.kernel.org/r/20250801030127.2006979-1-nicolinc@nvidia.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
- Fix NULL de-ref in css_rstat_exit() which could happen after allocation
failure.
- Fix a cpuset partition handling bug and a couple other misc issues.
- Doc spelling fix.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaKd9WQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGd3pAQCkqjlcHyKBOr8AXCcNmisyj0PvSFJwmcCWf3Mu
7gsJ0wEAjxqs+otIPHzjhQlRBMN1vhwn5/B/xVqKO57pCHtrGQY=
=zj8n
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix NULL de-ref in css_rstat_exit() which could happen after
allocation failure
- Fix a cpuset partition handling bug and a couple other misc issues
- Doc spelling fix
* tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup: fixed spelling mistakes in documentation
cgroup: avoid null de-ref in css_rstat_exit()
cgroup/cpuset: Remove the unnecessary css_get/put() in cpuset_partition_write()
cgroup/cpuset: Fix a partition error with CPU hotplug
cgroup/cpuset: Use static_branch_enable_cpuslocked() on cpusets_insane_config_key
A small collection of fixes that came in during the past week, a few
driver specifics plus one fix for the spi-mem core where we weren't
taking account of the frequency capabilities of the system when
determining if it can support an operation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmincWcACgkQJNaLcl1U
h9AZJgf9GgIDY30+6IAW13I+g0UVOWyUi7rz6RN4fC6fNc82+OLfgkR4yKr7a2az
77udyVqy/cgvUEC41OyJ8Tvl8mfPXjOQ8WzobYynq/ldvN4d7JRGeds2rF4qG3rF
yz7sCDZBcBwZYQ5FGTsjawubFOjvgatafVcLUsZ6Q4gyt8lvyHs+Pl3P/XeEVlVZ
GVbqJfzpidpxDxMII5E0TH+YGJwtU0BC0JGB0EfdW9/SKXRp3nkbMJIXVshmy5G3
E8QLVE6brSL7hhDOjOtBfxEb5ddvibsEkNJUg//VfDFh3tTx3BGaFDxaCw/WPGtL
JReicUkzH0bm6Qg++xkVaHh37XFLDw==
=hyVr
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes that came in during the past week, a few
driver specifics plus one fix for the spi-mem core where we weren't
taking account of the frequency capabilities of the system when
determining if it can support an operation"
* tag 'spi-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: st: fix PM macros to use CONFIG_PM instead of CONFIG_PM_SLEEP
spi: spi-qpic-snand: fix calculating of ECC OOB regions' properties
spi: spi-fsl-lpspi: Clamp too high speed_hz
spi: spi-mem: add spi_mem_adjust_op_freq() in spi_mem_supports_op()
spi: spi-mem: Add missing kdoc argument
spi: spi-qpic-snand: use correct CW_PER_PAGE value for OOB write
A couple of fairly minor device specific fixes that came in over the
past week or so, plus the addition of an actual maintainer for the
IR38060.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmincPUACgkQJNaLcl1U
h9CCbgf/dhq9uXBrSAEi/bAxMlr0sRPSeqZypnnkgPm7rFG2Ox7B2sZLa03Un8hz
Kus6sUupyX/SHBTNIV+fgO6EXgeoOwXtTEvqdRy9TuA0EQMDM3QWTCkshF2wgMG5
o73ThEaWfLw1kju3NUKgV1szcgQ7VB8qHqlJwor3htPgSTHDq+Rk22lLYJ7oMVNo
E1D075tyJb0hyBlPqVmard5nItWSHYi3SRvATu4to0MLU6iU970NWtzOVzCKzM+i
2TDt84QWqhemvArz08AKTpCYk9azxHbPSlS8UH5UV8WyX4MIfWAUdk5XworIpCPk
0d2jLevYR7BNO5uX1hZD7gqLno6kAg==
=w1wH
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fairly minor device specific fixes that came in over the
past week or so, plus the addition of an actual maintainer for the
IR38060"
* tag 'regulator-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65219: regulator: tps65219: Fix error codes in probe()
regulator: pca9450: Use devm_register_sys_off_handler
regulator: dt-bindings: infineon,ir38060: Add Guenter as maintainer from IBM
- Make ACPI APEI error injection check the version of the request when
mapping the EINJ parameter structure in the BIOS reserved memory to
prevent injecting errors based on an uninitialized field (Tony Luck)
- Fix potential NULL dereference in __einj_error_inject() that may
occur when memory allocation fails (Charles Han)
- Remove the __exit annotation from einj_remove(), so it can be called
on errors during faux device probe (Uwe Kleine-König)
- Use a security-version-number check instead of a runtime version
check during ACPI platform firmware runtime driver updates to prevent
those updates from failing due to false-positive driver version check
failures (Chen Yu)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAminbNQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1ZBYH/RhnnCQasjnY8aWLk/yJAa7cdR9vuJKJ
V5ncMp/7/AYLLa9Bgszb6yh1zUCaaGbLUYroP89BDTUY3tn2NVQbHHD4I3qPX6FI
si4D7y9b5KsJjDOz2BYIcENZP/HqrSLox9tmYrUDh/2ADp7Ph3o9X0k9mFeXLXjx
fl3qGY7/4XTi2OG90Xh7aGo1W/damw0PjpAa0wNR8GY+ZhmiYtoLItCAJDFkTUlw
2Gv3t3nPIJbE6fuNI33nhwMNgG5wfYssC8W1KuFmpxi3VSryFNAMgaGqlWvlkcVt
vMybl2npaqjtTSOkkBaotSLUb7U0UFIa9thyE1o8FEsPDBxgAuyUXKI=
=jbTv
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three new issues in the ACPI APEI error injection code and
an ACPI platform firmware runtime update interface issue:
- Make ACPI APEI error injection check the version of the request
when mapping the EINJ parameter structure in the BIOS reserved
memory to prevent injecting errors based on an uninitialized
field (Tony Luck)
- Fix potential NULL dereference in __einj_error_inject() that may
occur when memory allocation fails (Charles Han)
- Remove the __exit annotation from einj_remove(), so it can be
called on errors during faux device probe (Uwe Kleine-König)
- Use a security-version-number check instead of a runtime version
check during ACPI platform firmware runtime driver updates to
prevent those updates from failing due to false-positive driver
version check failures (Chen Yu)"
* tag 'acpi-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: pfr_update: Fix the driver update version check
ACPI: APEI: EINJ: Fix resource leak by remove callback in .exit.text
ACPI: APEI: EINJ: fix potential NULL dereference in __einj_error_inject()
ACPI: APEI: EINJ: Check if user asked for EINJV2 injection
- Prevent the menu cpuidle governor from selecting idle states with
exit latency exceeding the current PM QoS limit after stopping the
scheduler tick (Rafael Wysocki)
- Make the set subcommand's -t option in the cpupower utility work as
documented and allow it to control the CPU boost feature of cpufreq
beyond x86 (Shinji Nomoto)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAminaMASHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO18vwH/1LQoO0ibu40yBpfjVemwuNGn4jrFV1i
lDnZ03njFGaZ01abjDEeNdggHCRybCmqWVQArEMGzWqCUGo/zmWzyi5apXic6d1A
qSMvFfoZHXdExa2+nm4OHcSCFAHrz+81ACyWlTuObhoPGqo2Mvu/hf2e2kn7uPOG
/HQE1E5sYqLaqBxLhQAfPU7CyfXiM2LL/8Fv7420Z5I85Tx9z6cHa7sUgrNveJxP
BrEm9u9dRKKc/tHL0RGsdCf7Ddff9jF/npjJ0965eSNwJh6Wr3HbcGOKyQcI3Xjx
S+UxijVz1CuZwMmyRHibYj+HV+fsYHbU6G9wQpez5wJBlHNbnI1/kzE=
=DhR+
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpuidle menu governor issue and two issues in the cpupower
utility:
- Prevent the menu cpuidle governor from selecting idle states with
exit latency exceeding the current PM QoS limit after stopping the
scheduler tick (Rafael Wysocki)
- Make the set subcommand's -t option in the cpupower utility work as
documented and allow it to control the CPU boost feature of cpufreq
beyond x86 (Shinji Nomoto)"
* tag 'pm-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: governors: menu: Avoid selecting states with too much latency
cpupower: Allow control of boost feature on non-x86 based systems with boost support.
cpupower: Fix a bug where the -t option of the set subcommand was not working.
- Fix a subtle bug during SCX enabling where a dead task skips init but
doesn't skip sched class switch leading to invalid task state transition
warning.
- Cosmetic fix in selftests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaKdWkg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGWI2AP9e+OTPPHa+sHeM7g3ngigF44nyvvRIPIMJHmZO
7CYT9AD/e+YI+atHzo5iSBcpGwjW8BSLc0ozdrkI0N7XFLXC4go=
=7Ti1
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix a subtle bug during SCX enabling where a dead task skips init
but doesn't skip sched class switch leading to invalid task state
transition warning
- Cosmetic fix in selftests
* tag 'sched_ext-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Remove duplicate sched.h header
sched/ext: Fix invalid task state transitions on class switch
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag",
breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc
in the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=waf0
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth.
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN
flag", breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid
deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc in
the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management"
* tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: nf_reject: don't leak dst refcount for loopback packets
net/mlx5e: Preserve shared buffer capacity during headroom updates
net/mlx5e: Query FW for buffer ownership
net/mlx5: Restore missing scheduling node cleanup on vport enable failure
net/mlx5: Fix QoS reference leak in vport enable error path
net/mlx5: Destroy vport QoS element when no configuration remains
net/mlx5e: Preserve tc-bw during parent changes
net/mlx5: Remove default QoS group and attach vports directly to root TSAR
net/mlx5: Base ECVF devlink port attrs from 0
net: pse-pd: pd692x0: Skip power budget configuration when undefined
net: pse-pd: pd692x0: Fix power budget leak in manager setup error path
Octeontx2-af: Skip overlap check for SPI field
selftests: tls: add tests for zero-length records
tls: fix handling of zero-length records on the rx_list
net: airoha: ppe: Do not invalid PPE entries in case of SW hash collision
selftests: bonding: add test for passive LACP mode
bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU
bonding: update LACP activity flag after setting lacp_active
Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag"
ipv6: sr: Fix MAC comparison to be constant-time
...
recent patches to add a WARN() when replacing skb dst entry found an
old bug:
WARNING: include/linux/skbuff.h:1165 skb_dst_check_unset include/linux/skbuff.h:1164 [inline]
WARNING: include/linux/skbuff.h:1165 skb_dst_set include/linux/skbuff.h:1210 [inline]
WARNING: include/linux/skbuff.h:1165 nf_reject_fill_skb_dst+0x2a4/0x330 net/ipv4/netfilter/nf_reject_ipv4.c:234
[..]
Call Trace:
nf_send_unreach+0x17b/0x6e0 net/ipv4/netfilter/nf_reject_ipv4.c:325
nft_reject_inet_eval+0x4bc/0x690 net/netfilter/nft_reject_inet.c:27
expr_call_ops_eval net/netfilter/nf_tables_core.c:237 [inline]
..
This is because blamed commit forgot about loopback packets.
Such packets already have a dst_entry attached, even at PRE_ROUTING stage.
Instead of checking hook just check if the skb already has a route
attached to it.
Fixes: f53b9b0bdc ("netfilter: introduce support for reject at prerouting stage")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250820123707.10671-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The entry of the validators table for UAC3 feature unit is defined
with a wrong sub-type UAC_FEATURE (= 0x06) while it should have been
UAC3_FEATURE (= 0x07). This patch corrects the entry value.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Link: https://patch.msgid.link/20250821150835.8894-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When port buffer headroom changes, port_update_shared_buffer()
recalculates the shared buffer size and splits it in a 3:1 ratio
(lossy:lossless) - Currently, the calculation is:
lossless = shared / 4;
lossy = (shared / 4) * 3;
Meaning, the calculation dropped the remainder of shared % 4 due to
integer division, unintentionally reducing the total shared buffer
by up to three cells on each update. Over time, this could shrink
the buffer below usable size.
Fix it by changing the calculation to:
lossless = shared / 4;
lossy = shared - lossless;
This retains all buffer cells while still approximating the
intended 3:1 split, preventing capacity loss over time.
While at it, perform headroom calculations in units of cells rather than
in bytes for more accurate calculations avoiding extra divisions.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Armen Ratner <armeng@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SW currently saves local buffer ownership when setting
the buffer.
This means that the SW assumes it has ownership of the buffer
after the command is set.
If setting the buffer fails and we remain in FW ownership,
the local buffer ownership state incorrectly remains as SW-owned.
This leads to incorrect behavior in subsequent PFC commands,
causing failures.
Instead of saving local buffer ownership in SW,
query the FW for buffer ownership when setting the buffer.
This ensures that the buffer ownership state is accurately
reflected, avoiding the issues caused by incorrect ownership
states.
Fixes: ecdf2dadee ("net/mlx5e: Receive buffer support for DCBX")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-8-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a VF has been configured and the user later clears all QoS settings,
the vport element remains in the firmware QoS tree. This leads to
inconsistent behavior compared to VFs that were never configured, since
the FW assumes that unconfigured VFs are outside the QoS hierarchy.
As a result, the bandwidth share across VFs may differ, even though
none of them appear to have any configuration.
Align the driver behavior with the FW expectation by destroying the
vport QoS element when all configurations are removed.
Fixes: c9497c9890 ("net/mlx5: Add support for setting VF min rate")
Fixes: cf7e73770d ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250820133209.389065-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When changing parent of a node/leaf with tc-bw configured, the code
saves and restores tc-bw values. However, it was reading the converted
hardware bw_share values (where 0 becomes 1) instead of the original
user values, causing incorrect tc-bw calculations after parent change.
Store original tc-bw values in the node structure and use them directly
for save/restore operations.
Fixes: cf7e73770d ("net/mlx5: Manage TC arbiter nodes and implement full support for tc-bw")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver creates a default group (`node0`) and attaches
all vports to it unless the user explicitly sets a parent group. As a
result, when a user configures tx_share on a group and tx_share on
a VF, the expectation is for the group and the VF to share bandwidth
relatively. However, since the VF is not connected to the same parent
(but to the default node), the proportional share logic is not applied
correctly.
To fix this, remove the default group (`node0`) and instead connect
vports directly to the root TSAR when no parent is specified. This
ensures that vports and groups share the same root scheduler and their
tx_share values are compared directly under the same hierarchy.
Fixes: 0fe132eac3 ("net/mlx5: E-switch, Allow to add vports to rate groups")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-3-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adjust the vport number by the base ECVF vport number so the port
attributes start at 0. Previously the port attributes would start 1
after the maximum number of host VFs.
Fixes: dc13180824 ("net/mlx5: Enable devlink port for embedded cpu VF vports")
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250820133209.389065-2-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the power supply's power budget is not defined in the device tree,
the current code still requests power and configures the PSE manager
with a 0W power limit, which is undesirable behavior.
Skip power budget configuration entirely when the budget is zero,
avoiding unnecessary power requests and preventing invalid 0W limits
from being set on the PSE manager.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250820133321.841054-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a resource leak where manager power budgets were freed on both
success and error paths during manager setup. Power budgets should
only be freed on error paths after regulator registration or during
driver removal.
Refactor cleanup logic by extracting OF node cleanup and power budget
freeing into separate helper functions for better maintainability.
Fixes: 359754013e ("net: pse-pd: pd692x0: Add support for PSE PI priority feature")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250820132708.837255-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Octeontx2/CN10K silicon supports generating a 256-bit key per packet.
The specific fields to be extracted from a packet for key generation
are configurable via a Key Extraction (MKEX) Profile.
The AF driver scans the configured extraction profile to ensure that
fields from upper layers do not overwrite fields from lower layers in
the key.
Example Packet Field Layout:
LA: DMAC + SMAC
LB: VLAN
LC: IPv4/IPv6
LD: TCP/UDP
Valid MKEX Profile Configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[30-31]
Invalid MKEX profile configuration:
LA -> DMAC -> key_offset[0-5]
LC -> SIP -> key_offset[20-23]
LD -> SPORT -> key_offset[2-3] // Overlaps with DMAC field
In another scenario, if the MKEX profile is configured to extract
the SPI field from both AH and ESP headers at the same key offset,
the driver rejecting this configuration. In a regular traffic,
ipsec packet will be having either AH(LD) or ESP (LE). This patch
relaxes the check for the same.
Fixes: 12aa0a3b93 ("octeontx2-af: Harden rule validation.")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20250820063919.1463518-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test various combinations of zero-length records.
Unfortunately, kernel cannot be coerced into producing those,
so hardcode the ciphertext messages in the test.
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250820021952.143068-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length.
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Reported-by: Billy Jheng Bing-Jhong <billy@starlabs.sg>
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250820021952.143068-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=dUol
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix a lot of build warnings for LTO-enabled objtool check, increase
COMMAND_LINE_SIZE up to 4096, rename a missing GCC_PLUGIN_STACKLEAK to
KSTACK_ERASE, and fix some bugs about arch timer, module loading, LBT
and KVM"
* tag 'loongarch-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Add address alignment check in pch_pic register access
LoongArch: KVM: Use kvm_get_vcpu_by_id() instead of kvm_get_vcpu()
LoongArch: KVM: Fix stack protector issue in send_ipi_data()
LoongArch: KVM: Make function kvm_own_lbt() robust
LoongArch: Rename GCC_PLUGIN_STACKLEAK to KSTACK_ERASE
LoongArch: Save LBT before FPU in setup_sigcontext()
LoongArch: Optimize module load time by optimizing PLT/GOT counting
LoongArch: Add cpuhotplug hooks to fix high cpu usage of vCPU threads
LoongArch: Increase COMMAND_LINE_SIZE up to 4096
LoongArch: Pass annotate-tablejump option if LTO is enabled
objtool/LoongArch: Get table size correctly if LTO is enabled
pm_sleep_ptr() depends on CONFIG_PM_SLEEP while pm_ptr() depends on
CONFIG_PM. Since ST SSC4 implements runtime PM it makes sense using
pm_ptr() here.
For the same reason replace PM macros that use CONFIG_PM. Doing so
prevents from using __maybe_unused attribute of runtime PM functions.
Link: https://lore.kernel.org/lkml/CAMuHMdX9nkROkAJJ5odv4qOWe0bFTmaFs=Rfxsfuc9+DT-bsEQ@mail.gmail.com
Fixes: 6f8584a482 ("spi: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()")
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250820180310.9605-1-rgallaispou@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a regression where 'make clean' stopped removing some of the
generated assembly files on arm and arm64.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaKaR/xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK486AP4z3+DbFNj3WHLA/O3uFxgR4eiUW9tl
gVtzslK5j2rxLwEAuOrY0qAhzX2dJ0/KN6y7T1qtOEZoGIZ2j85HDvMh3wU=
=d+ja
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
"Fix a regression where 'make clean' stopped removing some of the
generated assembly files on arm and arm64"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: ensure generated *.S files are removed on make clean
lib/crypto: sha: Update Kconfig help for SHA1 and SHA256
-----BEGIN PGP SIGNATURE-----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=pxR5
-----END PGP SIGNATURE-----
Merge tag '6.17-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix refcount issue that can cause memory leak
- rate limit repeated connections from IPv6, not just IPv4 addresses
- fix potential null pointer access of smb direct work queue
* tag '6.17-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix refcount leak causing resource not released
ksmbd: extend the connection limiting mechanism to support IPv6
smb: server: split ksmbd_rdma_stop_listening() out of ksmbd_rdma_destroy()
SW hash computed by airoha_ppe_foe_get_entry_hash routine (used for
foe_flow hlist) can theoretically produce collisions between two
different HW PPE entries.
In airoha_ppe_foe_insert_entry() if the collision occurs we will mark
the second PPE entry in the list as stale (setting the hw hash to 0xffff).
Stale entries are no more updated in airoha_ppe_foe_flow_entry_update
routine and so they are removed by Netfilter.
Fix the problem not marking the second entry as stale in
airoha_ppe_foe_insert_entry routine if we have already inserted the
brand new entry in the PPE table and let Netfilter remove real stale
entries according to their timestamp.
Please note this is just a theoretical issue spotted reviewing the code
and not faced running the system.
Fixes: cd53f62261 ("net: airoha: Add L2 hw acceleration support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250818-airoha-en7581-hash-collision-fix-v1-1-d190c4b53d1c@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu says:
====================
bonding: fix negotiation flapping in 802.3ad passive mode
This patch fixes unstable LACP negotiation when bonding is configured in
passive mode (`lacp_active=off`).
Previously, the actor would stop sending LACPDUs after initial negotiation
succeeded, leading to the partner timing out and restarting the negotiation
cycle. This resulted in continuous LACP state flapping.
The fix ensures the passive actor starts sending periodic LACPDUs after
receiving the first LACPDU from the partner, in accordance with IEEE
802.1AX-2020 section 6.4.1.
====================
Link: https://patch.msgid.link/20250815062000.22220-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a selftest to verify bonding behavior when `lacp_active` is set to `off`.
The test checks the following:
- The passive LACP bond should not send LACPDUs before receiving a partner's
LACPDU.
- The transmitted LACPDUs must not include the active flag.
- After transitioning to EXPIRED and DEFAULTED states, the passive side should
still not initiate LACPDUs.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-4-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When `lacp_active` is set to `off`, the bond operates in passive mode, meaning
it only "speaks when spoken to." However, the current kernel implementation
only sends an LACPDU in response when the partner's state changes.
As a result, once LACP negotiation succeeds, the actor stops sending LACPDUs
until the partner times out and sends an "expired" LACPDU. This causes
continuous LACP state flapping.
According to IEEE 802.1AX-2014, 6.4.13 Periodic Transmission machine. The
values of Partner_Oper_Port_State.LACP_Activity and
Actor_Oper_Port_State.LACP_Activity determine whether periodic transmissions
take place. If either or both parameters are set to Active LACP, then periodic
transmissions occur; if both are set to Passive LACP, then periodic
transmissions do not occur.
To comply with this, we remove the `!bond->params.lacp_active` check in
`ad_periodic_machine()`. Instead, we initialize the actor's port's
`LACP_STATE_LACP_ACTIVITY` state based on `lacp_active` setting.
Additionally, we avoid setting the partner's state to
`LACP_STATE_LACP_ACTIVITY` in the EXPIRED state, since we should not assume
the partner is active by default.
This ensures that in passive mode, the bond starts sending periodic LACPDUs
after receiving one from the partner, and avoids flapping due to inactivity.
Fixes: 3a755cd8b7 ("bonding: add new option lacp_active")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The port's actor_oper_port_state activity flag should be updated immediately
after changing the lacp_active option to reflect the current mode correctly.
Fixes: 3a755cd8b7 ("bonding: add new option lacp_active")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250815062000.22220-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A few fixes that came in during the past week, there's some updates for
the CS35L56 which adjust the driver for production silicon and a fix for
buggy resume of the ES9389.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmimWXAACgkQJNaLcl1U
h9BGKAf+MczirBmF8BaLvCYqWRWmqhSMuNsKibzl8E3Acf2/NHhX1sdKsqOPss4L
Lje68EfywFP8U8/iARv6Aiijm1oIpF6C6U5GAd5ArInfmkIgITGF+OYObAmZdVbm
7NX8xSk4KgwCzZOv+3JG34wECmVtXrBnNpd7/Bo+RM+xxcxyUVUFcdMPuoUQvef9
Jc2cRDn9N9Lo7qi9DgXaBBH/cW4cgic1+CWEmoxSMtQJ1hXaxgaRYskfb5j4Sb1f
w1Lhw46eMMuTOkKQ1G8sJ0zqM/bS8ZkT0IFSSNDSRXXpLThPj/fNBjxYYBM01brG
r0shD5ju/2OgS13wWMPkfijzaU5dWw==
=nURg
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.17-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
A few fixes that came in during the past week, there's some updates for
the CS35L56 which adjust the driver for production silicon and a fix for
buggy resume of the ES9389.
This reverts commit db400061b5.
This commit can cause a Devicetree ABI break for older DTS files that rely this
flag for RMII configuration. Adding this back in ensures that the older
DTBs will not break.
Fixes: db400061b5 ("net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://patch.msgid.link/20250819163236.100680-1-Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this.
Fixes: bf355b8d2c ("ipv6: sr: add core files for SR HMAC support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250818202724.15713-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Receiving HSR frame with insufficient space to hold HSR tag in the skb
can result in a crash (kernel BUG):
[ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1
[ 45.392559] ------------[ cut here ]------------
[ 45.392912] kernel BUG at net/core/skbuff.c:211!
[ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef)
[ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0
<snip registers, remove unreliable trace>
[ 45.402911] Call Trace:
[ 45.403105] <IRQ>
[ 45.404470] skb_push+0xcd/0xf0
[ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0
[ 45.406513] br_forward_finish+0x128/0x260
[ 45.408483] __br_forward+0x42d/0x590
[ 45.409464] maybe_deliver+0x2eb/0x420
[ 45.409763] br_flood+0x174/0x4a0
[ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0
[ 45.411618] br_handle_frame+0xac3/0x1230
[ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0
[ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0
[ 45.424478] __netif_receive_skb+0x22/0x170
[ 45.424806] process_backlog+0x242/0x6d0
[ 45.425116] __napi_poll+0xbb/0x630
[ 45.425394] net_rx_action+0x4d1/0xcc0
[ 45.427613] handle_softirqs+0x1a4/0x580
[ 45.427926] do_softirq+0x74/0x90
[ 45.428196] </IRQ>
This issue was found by syzkaller.
The panic happens in br_dev_queue_push_xmit() once it receives a
corrupted skb with ETH header already pushed in linear data. When it
attempts the skb_push() call, there's not enough headroom and
skb_push() panics.
The corrupted skb is put on the queue by HSR layer, which makes a
sequence of unintended transformations when it receives a specific
corrupted HSR frame (with incomplete TAG).
Fix it by dropping and consuming frames that are not long enough to
contain both ethernet and hsr headers.
Alternative fix would be to check for enough headroom before skb_push()
in br_dev_queue_push_xmit().
In the reproducer, this is injected via AF_PACKET, but I don't easily
see why it couldn't be sent over the wire from adjacent network.
Further Details:
In the reproducer, the following network interface chain is set up:
┌────────────────┐ ┌────────────────┐
│ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐
└────────────────┘ └────────────────┘ │
│ ┌──────┐
├─┤ hsr0 ├───┐
│ └──────┘ │
┌────────────────┐ ┌────────────────┐ │ │┌────────┐
│ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │
└────────────────┘ └────────────────┘ ┌┼ bridge │
││ │
│└────────┘
│
┌───────┐ │
│ ... ├──────┘
└───────┘
To trigger the events leading up to crash, reproducer sends a corrupted
HSR frame with incomplete TAG, via AF_PACKET socket on 'veth0_to_hsr'.
The first HSR-layer function to process this frame is
hsr_handle_frame(). It and then checks if the
protocol is ETH_P_PRP or ETH_P_HSR. If it is, it calls
skb_set_network_header(skb, ETH_HLEN + HSR_HLEN), without checking that
the skb is long enough. For the crashing frame it is not, and hence the
skb->network_header and skb->mac_len fields are set incorrectly,
pointing after the end of the linear buffer.
I will call this a BUG#1 and it is what is addressed by this patch. In
the crashing scenario before the fix, the skb continues to go down the
hsr path as follows.
hsr_handle_frame() then calls this sequence
hsr_forward_skb()
fill_frame_info()
hsr->proto_ops->fill_frame_info()
hsr_fill_frame_info()
hsr_fill_frame_info() contains a check that intends to check whether the
skb actually contains the HSR header. But the check relies on the
skb->mac_len field which was erroneously setup due to BUG#1, so the
check passes and the execution continues back in the hsr_forward_skb():
hsr_forward_skb()
hsr_forward_do()
hsr->proto_ops->get_untagged_frame()
hsr_get_untagged_frame()
create_stripped_skb_hsr()
In create_stripped_skb_hsr(), a copy of the skb is created and is
further corrupted by operation that attempts to strip the HSR tag in a
call to __pskb_copy().
The skb enters create_stripped_skb_hsr() with ethernet header pushed in
linear buffer. The skb_pull(skb_in, HSR_HLEN) thus pulls 6 bytes of
ethernet header into the headroom, creating skb_in with a headroom of
size 8. The subsequent __pskb_copy() then creates an skb with headroom
of just 2 and skb->len of just 12, this is how it looks after the copy:
gdb) p skb->len
$10 = 12
(gdb) p skb->data
$11 = (unsigned char *) 0xffff888041e45382 "\252\252\252\252\252!\210\373",
(gdb) p skb->head
$12 = (unsigned char *) 0xffff888041e45380 ""
It seems create_stripped_skb_hsr() assumes that ETH header is pulled
in the headroom when it's entered, because it just pulls HSR header on
top. But that is not the case in our code-path and we end up with the
corrupted skb instead. I will call this BUG#2
*I got confused here because it seems that under no conditions can
create_stripped_skb_hsr() work well, the assumption it makes is not true
during the processing of hsr frames - since the skb_push() in
hsr_handle_frame to skb_pull in hsr_deliver_master(). I wonder whether I
missed something here.*
Next, the execution arrives in hsr_deliver_master(). It calls
skb_pull(ETH_HLEN), which just returns NULL - the SKB does not have
enough space for the pull (as it only has 12 bytes in total at this
point).
*The skb_pull() here further suggests that ethernet header is meant
to be pushed through the whole hsr processing and
create_stripped_skb_hsr() should pull it before doing the HSR header
pull.*
hsr_deliver_master() then puts the corrupted skb on the queue, it is
then picked up from there by bridge frame handling layer and finally
lands in br_dev_queue_push_xmit where it panics.
Cc: stable@kernel.org
Fixes: 48b491a5cc ("net: hsr: fix mac_len checks")
Reported-by: syzbot+a81f2759d022496b40ab@syzkaller.appspotmail.com
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250819082842.94378-1-acsjakub@amazon.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The WARN_ON trigger based on !cl->leaf.q->q.qlen is unnecessary in
htb_activate. htb_dequeue_tree already accounts for that scenario.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250819033632.579854-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following setup can trigger a WARNING in htb_activate due to
the condition: !cl->leaf.q->q.qlen
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1
tc class add dev lo parent 1: classid 1:1 \
htb rate 64bit
tc qdisc add dev lo parent 1:1 handle f: \
cake memlimit 1b
ping -I lo -f -c1 -s64 -W0.001 127.0.0.1
This is because the low memlimit leads to a low buffer_limit, which
causes packet dropping. However, cake_enqueue still returns
NET_XMIT_SUCCESS, causing htb_enqueue to call htb_activate with an
empty child qdisc. We should return NET_XMIT_CN when packets are
dropped from the same tin and flow.
I do not believe return value of NET_XMIT_CN is necessary for packet
drops in the case of ack filtering, as that is meant to optimize
performance, not to signal congestion.
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250819033601.579821-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ksz9477_hsr_join() is called once to setup the HSR port membership, but
the port can be enabled later, or disabled and enabled back and the port
membership is not set correctly inside ksz_update_port_member(). The
added code always use the correct HSR port membership for HSR port that
is enabled.
Fixes: 2d61298fdd ("net: dsa: microchip: Enable HSR offloading for KSZ9477")
Reported-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Łukasz Majewski <lukma@nabladev.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://patch.msgid.link/20250819010457.563286-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
