-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmja74IbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiacR4H/04aBsr7LZnTJVeZLQwK
HKoOwXBqiQyqPdjKXGKnp7Mh9gRp2W3V11VsYTuDJNUS+Vz5YXW0z8cRnUfZ3SYs
l+GZC3vZeAy2EVJE1U6Mb673hU8vziI80IO2q/tGzaj9a+wC3L0lemc+YFQTwG+u
pMtt8zU2vHRjgkx8TNNqJBBOLLDV+RzIl8pqXVnh4eju6x6ZdreGnjXaePYMdjG0
fXLf9XwIeWREqbfeOCEOB50Ts71kkdiOeskwnJyfCTDT8WTu3zC/dICqfh66e3Gg
8hQKvMsuKpm/FwbtgdB0WvaDjENH6PmY+ubLYVxwvNpcsTSqfe0IYGm+HpUP+TPf
m+Y=
=w+JL
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- A new layer for caching objects for allocation and free via percpu
arrays called sheaves.
The aim is to combine the good parts of SLAB (lower-overhead and
simpler percpu caching, compared to SLUB) without the past issues
with arrays for freeing remote NUMA node objects and their flushing.
It also allows more efficient kfree_rcu(), and cheaper object
preallocations for cases where the exact number of objects is
unknown, but an upper bound is.
Currently VMAs and maple nodes are using this new caching, with a
plan to enable it for all caches and remove the complex SLUB fastpath
based on cpu (partial) slabs and this_cpu_cmpxchg_double().
(Vlastimil Babka, with Liam Howlett and Pedro Falcato for the maple
tree changes)
- Re-entrant kmalloc_nolock(), which allows opportunistic allocations
from NMI and tracing/kprobe contexts.
Building on prior page allocator and memcg changes, it will result in
removing BPF-specific caches on top of slab (Alexei Starovoitov)
- Various fixes and cleanups. (Kuan-Wei Chiu, Matthew Wilcox, Suren
Baghdasaryan, Ye Liu)
* tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (40 commits)
slab: Introduce kmalloc_nolock() and kfree_nolock().
slab: Reuse first bit for OBJEXTS_ALLOC_FAIL
slab: Make slub local_(try)lock more precise for LOCKDEP
mm: Introduce alloc_frozen_pages_nolock()
mm: Allow GFP_ACCOUNT to be used in alloc_pages_nolock().
locking/local_lock: Introduce local_lock_is_locked().
maple_tree: Convert forking to use the sheaf interface
maple_tree: Add single node allocation support to maple state
maple_tree: Prefilled sheaf conversion and testing
tools/testing: Add support for prefilled slab sheafs
maple_tree: Replace mt_free_one() with kfree()
maple_tree: Use kfree_rcu in ma_free_rcu
testing/radix-tree/maple: Hack around kfree_rcu not existing
tools/testing: include maple-shim.c in maple.c
maple_tree: use percpu sheaves for maple_node_cache
mm, vma: use percpu sheaves for vm_area_struct cache
tools/testing: Add support for changes to slab for sheaves
slab: allow NUMA restricted allocations to use percpu sheaves
tools/testing/vma: Implement vm_refcnt reset
slab: skip percpu sheaves for remote object freeing
...
Core & protocols
----------------
- Improve drop account scalability on NUMA hosts for RAW and UDP sockets
and the backlog, almost doubling the Pps capacity under DoS.
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance by
an additional 50%, even more under extreme conditions.
- Add support for PSP encryption of TCP connections; this mechanism has
some similarities with IPsec and TLS, but offers superior HW offloads
capabilities.
- Ongoing work to support Accurate ECN for TCP. AccECN allows more than
one congestion notification signal per RTT and is a building block for
Low Latency, Low Loss, and Scalable Throughput (L4S).
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath.
- Refactor skb deferral free to better scale on large multi-NUMA hosts,
this improves TCP and UDP RX performances significantly on such HW.
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds.
- Improve handling of setups with a large number of nexthop, making dump
operating scaling linearly and avoiding unneeded synchronize_rcu() on
delete.
- Improve bridge handling of VLAN FDB, storing a single entry per bridge
instead of one entry per port; this makes the dump order of magnitude
faster on large switches.
- Restore IP ID correctly for encapsulated packets at GSO segmentation
time, allowing GRO to merge packets in more scenarios.
- Improve netfilter matching performance on large sets.
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting recent
TCP autotuning changes.
- Allow bridges to redirect to a backup port when the bridge port is
administratively down.
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups.
- Add RCU safety to dst->dev, closing a lot of possible races.
- A significant crypto library API for SCTP, MPTCP and IPv6 SR, reducing
code duplication.
- Supports pulling data from an skb frag into the linear area of an XDP
buffer.
Things we sprinkled into general kernel code
--------------------------------------------
- Generate netlink documentation from YAML using an integrated
YAML parser.
Driver API
----------
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection.
- Introduce API for fetching the DMA device for a given queue, allowing
TCP zerocopy RX on more H/W setups.
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath.
- Add a new dedicated ethtool callback enabling drivers to provide the
number of RX rings directly, improving efficiency and clarity in RX
ring queries and RSS configuration.
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause.
- Support for DPLL phase offset exponential moving average, controlling
the average smoothing factor.
Device drivers
--------------
- Add a new Huawei driver for 3rd gen NIC (hinic3).
- Add a new SpacemiT driver for K1 ethernet MAC.
- Add a generic abstraction for shared memory communication devices
(dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages to
improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4): support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k_
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=w2Kz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
The recent sha256 patch uses a GCC pragma to suppress compile errors for
a packed struct, but omits a needed pragma (see related link) and thus
still raises errors: (e.g. on GCC 12.3 armhf)
libbpf_utils.c:153:29: error: packed attribute causes inefficient alignment for ‘__val’ [-Werror=attributes]
153 | struct __packed_u32 { __u32 __val; } __attribute__((packed));
| ^~~~~
Resolve by adding the GCC diagnostic pragma to ignore "-Wattributes".
Link: https://lore.kernel.org/bpf/CAP-5=fXURWoZu2j6Y8xQy23i7=DfgThq3WC1RkGFBx-4moQKYQ@mail.gmail.com/
Fixes: 4a1c9e544b ("libbpf: remove linux/unaligned.h dependency for libbpf_sha256()")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Define a simple program using MOD, DIV, ADD instructions,
make sure that the program is rejected if invalid offset
field is used for instruction.
These are test cases for
commit 55c0ced59f ("bpf: Reject negative offsets for ALU ops")
Link: https://lore.kernel.org/all/tencent_70D024BAE70A0A309A4781694C7B764B0608@qq.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
open_capstone_handle is similar to capstone_init and used only by
symbol__disassemble_capstone. symbol__disassemble_capstone_powerpc
already uses capstone_init, transition symbol__disassemble_capstone
and eliminate open_capstone_handle.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move symbolization and srcline libbfd dependencies to a separate
libbfd.c. This mirrors moving llvm and capstone code. While this code
is deprecated as it is part of BUILD_NONDISTRO license incompatible
code, moving the code to its own file minimizes disruption in the main
files.
disasm_bpf.c is moved to libbfd.c also except for
symbol__disassemble_bpf_image which is currently more of a placeholder
function rather than something that provides disassembly support.
demangle-cxx.cpp code isn't migrated as it is very limited.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LLVM disassembly support was in disasm.c and addr2line support in
srcline.c. Move support out of these files into llvm.[ch] and remove
LLVM includes from those files. As disassembly routines can fail, make
failure the only option without HAVE_LIBLLVM_SUPPORT. For simplicity's
sake, duplicate the read_symbol utility function.
The intent with moving LLVM support into a single file is that dynamic
support, using dlopen for libllvm, can be added in later patches. This
can potentially always succeed or fail, so relying on ifdefs isn't
sufficient. Using dlopen is a useful option to minimize the perf tools
dependencies and potentially size.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's been relatively calm in this cycle from the feature POV, but
there were lots of cleanup works in the wide-range of code for
converting with the auto-cleanup macros like guard().
The mostly user-visible changes are the support of a couple of new
compress-offload API extensions, and the support of new ASoC codec /
platform drivers as well as USB-audio quirks.
Here we go with some highlights:
Core:
- Compress-offload API extension for 64bit timestamp support
- Compress-offload API extension for OPUS codec support
- Workaround for PCM locking issue with PREEMPT_RT and softirq
- KCSAN warning fix for ALSA sequencer core
ASoC:
- Continued cleanup works for ASoC core APIs
- Lots of cleanups and conversions of DT bindings
- Substantial maintainance work on the Intel AVS drivers
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754 and TAS2783A
- Remove support for TI WL1273 for old Nokia systems
USB-audio:
- Support for Tascam US-144mkII, Presonus S1824c support
- More flexible quirk option handling
- Fix for USB MIDI timer bug triggered by fuzzer
Others:
- A large series of cleanups with guard() & co macros over (non-ASoC)
sound drivers (PCI, ISA, HD-audio, USB-audio, drivers, etc)
- TAS5825 HD-audio side-codec support
-----BEGIN PGP SIGNATURE-----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=3Dqh
-----END PGP SIGNATURE-----
Merge tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm in this cycle from the feature POV, but
there were lots of cleanup works in the wide-range of code for
converting with the auto-cleanup macros like guard().
The mostly user-visible changes are the support of a couple of new
compress-offload API extensions, and the support of new ASoC codec /
platform drivers as well as USB-audio quirks.
Here we go with some highlights:
Core:
- Compress-offload API extension for 64bit timestamp support
- Compress-offload API extension for OPUS codec support
- Workaround for PCM locking issue with PREEMPT_RT and softirq
- KCSAN warning fix for ALSA sequencer core
ASoC:
- Continued cleanup works for ASoC core APIs
- Lots of cleanups and conversions of DT bindings
- Substantial maintainance work on the Intel AVS drivers
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754 and TAS2783A
- Remove support for TI WL1273 for old Nokia systems
USB-audio:
- Support for Tascam US-144mkII, Presonus S1824c support
- More flexible quirk option handling
- Fix for USB MIDI timer bug triggered by fuzzer
Others:
- A large series of cleanups with guard() & co macros over (non-ASoC)
sound drivers (PCI, ISA, HD-audio, USB-audio, drivers, etc)
- TAS5825 HD-audio side-codec support"
* tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (454 commits)
ALSA: usb-audio: don't hardcode gain for output channel of Presonus Studio
ALSA: usb-audio: add the initial mix for Presonus Studio 1824c
ALSA: doc: improved docs about quirk_flags in snd-usb-audio
ALSA: usb-audio: make param quirk_flags change-able in runtime
ALSA: usb-audio: improve module param quirk_flags
ALSA: usb-audio: add two-way convert between name and bit for QUIRK_FLAG_*
ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free
ALSA: usb-audio: add mono main switch to Presonus S1824c
ALSA: compress: document 'chan_map' member in snd_dec_opus
ASoC: cs35l56: Add support for CS35L56 B2 silicon
ASoC: cs35l56: Set fw_regs table after getting REVID
ALSA: hda/realtek: Add quirk for HP Spectre 14t-ea100
ASoc: tas2783A: Fix an error code in probe()
ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007
ASoC: qcom: sc8280xp: use sa8775p/ subdir for QCS9100 / QCS9075
ASoC: stm32: sai: manage context in set_sysclk callback
ASoC: renesas: msiof: ignore 1st FSERR
ASoC: renesas: msiof: Add note for The possibility of R/L opposite Capture
ASoC: renesas: msiof: setup both (Playback/Capture) in the same time
ASoC: renesas: msiof: tidyup DMAC stop timing
...
Capstone disassembly support was split between disasm.c and
print_insn.c. Move support out of these files into capstone.[ch] and
remove include capstone/capstone.h from those files. As disassembly
routines can fail, make failure the only option without
HAVE_LIBCAPSTONE_SUPPORT. For simplicity's sake, duplicate the
read_symbol utility function.
The intent with moving capstone support into a single file is that
dynamic support, using dlopen for libcapstone, can be added in later
patches. This can potentially always succeed or fail, so relying on
ifdefs isn't sufficient. Using dlopen is a useful option to minimize
the perf tools dependencies and potentially size.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the map argument const as the conversion act won't modify the map
and this allows other callers to use a const struct map.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As same reason with previous patch, use "cyles" instead of "cycles:P"
event by default to sample guest for "perf kvm top" command on Intel
platforms.
Fixes: cf8e55fe50 ("KVM: x86/pmu: Expose CPUIDs feature bits PDCM, DS, DTES64")
Reported-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After KVM supports PEBS for guest on Intel platforms
(https://lore.kernel.org/all/20220411101946.20262-1-likexu@tencent.com/),
host loses the capability to sample guest with PEBS since all PEBS related
MSRs are switched to guest value after vm-entry, like IA32_DS_AREA MSR is
switched to guest GVA at vm-entry. This would lead to "perf kvm record"
fails to sample guest on Intel platforms since "cycles:P" event is used to
sample guest by default as below case shows.
sudo perf kvm record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.787 MB perf.data.guest ]
So to ensure guest record can be sampled successfully, use "cycles"
instead of "cycles:P" to sample guest record by default on Intel
platforms. With this patch, the guest record can be sampled
successfully.
sudo perf kvm record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.783 MB perf.data.guest (23 samples) ]
Fixes: cf8e55fe50 ("KVM: x86/pmu: Expose CPUIDs feature bits PDCM, DS, DTES64")
Reported-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add helper x86__is_intel_cpu() to indicate if it's a x86 intel platform.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kvm_add_default_arch_event() helper may add 2 extra options but it
directly modifies the original argv[] array. This may cause out of range
memory access. Fix this issue.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Same with previous builtin-kvm code, perf_kwork__record() doesn't check
the memory allocation and explicitly free the allocated memory. Just fix
it.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current code allocates rec_argv[] array, but doesn't check if the
allocation is successful and explicitly free the rec_argv[] array.
Add them back.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools/lib/bpf/netlink.c depends on rtnetlink.h and genetlink.h (via
nlattr.h) which then depends on if_addr.h.
tools/bpf/bpftool/link.c depends on netfilter_arp.h which then depends
on netfilter.h.
Update check-headers.sh to keep these in sync.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonas Gottlieb <jonas.gottlieb@stackit.cloud>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maurice Lambert <mauricelambert434@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously the header gfp_types.h in tools points to the gfp_types.h
in include/linux. This is a problem for tools like perf, since the
tools header is supposed to be independent of the kernel
headers.
Therefore this patch copies the kernel header to the tools header and
adds a header check.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonas Gottlieb <jonas.gottlieb@stackit.cloud>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maurice Lambert <mauricelambert434@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
small_const_nbits is defined in asm-generic/bitsperlong.h which
bitmap.h uses but doesn't include causing build failures in some build
systems. Add the missing #include.
Note the bitmap.h in tools has diverged from that of the kernel, so no
changes are made there.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonas Gottlieb <jonas.gottlieb@stackit.cloud>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maurice Lambert <mauricelambert434@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
futex.h uses bool but lacks stdbool.h which causes build failures in
some build systems. Add the missing #include.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonas Gottlieb <jonas.gottlieb@stackit.cloud>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maurice Lambert <mauricelambert434@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Yuyang Huang <yuyanghuang@google.com>
Link: https://lore.kernel.org/r/20250905224708.2469021-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When running on a hypervisor the expected IPC metric may be missing as
the events may fail to be read. Don't expect metric output for this
test to avoid it failing.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A shift left of a signed 64-bit s64 may overflow and result in
undefined behavior caught by ubsan. Switch to a u64 instead.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The note_data at ptr is read as a nhdr but this may yield
out-of-bounds reads if there isn't nhdrs worth of data.
Be more defensive before doing the reads.
This is motivated by address sanitizer capturing out of bounds reads
running "perf top".
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When exploring building bpf_skel with GCC's BPF support, there was a
build failure because of bpf_core_field_exists vs the mem_hops bitfield:
```
In file included from util/bpf_skel/sample_filter.bpf.c:6:
util/bpf_skel/sample_filter.bpf.c: In function 'perf_get_sample':
tools/perf/libbpf/include/bpf/bpf_core_read.h:169:42: error: cannot take address of bit-field 'mem_hops'
169 | #define ___bpf_field_ref1(field) (&(field))
| ^
tools/perf/libbpf/include/bpf/bpf_helpers.h:222:29: note: in expansion of macro '___bpf_field_ref1'
222 | #define ___bpf_concat(a, b) a ## b
| ^
tools/perf/libbpf/include/bpf/bpf_helpers.h:225:29: note: in expansion of macro '___bpf_concat'
225 | #define ___bpf_apply(fn, n) ___bpf_concat(fn, n)
| ^~~~~~~~~~~~~
tools/perf/libbpf/include/bpf/bpf_core_read.h:173:9: note: in expansion of macro '___bpf_apply'
173 | ___bpf_apply(___bpf_field_ref, ___bpf_narg(args))(args)
| ^~~~~~~~~~~~
tools/perf/libbpf/include/bpf/bpf_core_read.h:188:39: note: in expansion of macro '___bpf_field_ref'
188 | __builtin_preserve_field_info(___bpf_field_ref(field), BPF_FIELD_EXISTS)
| ^~~~~~~~~~~~~~~~
util/bpf_skel/sample_filter.bpf.c:167:29: note: in expansion of macro 'bpf_core_field_exists'
167 | if (bpf_core_field_exists(data->mem_hops))
| ^~~~~~~~~~~~~~~~~~~~~
cc1: error: argument is not a field access
```
___bpf_field_ref1 was adapted for GCC in 12bbcf8e84
but the trick added for compatibility in 3a8b8fc317
isn't compatible with that as an address is used as an argument.
Workaround this by calling __builtin_preserve_field_info directly as the
bpf_core_field_exists macro does, but without the ___bpf_field_ref use.
Co-developed-by: Andrew Pinski <andrew.pinski@oss.qualcomm.com>
Signed-off-by: Andrew Pinski <andrew.pinski@oss.qualcomm.com>
Signed-off-by: Sam James <sam@gentoo.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://gcc.gnu.org/PR121420
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kOmc
-----END PGP SIGNATURE-----
Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
perf doesn't use libtracefs and so it doesn't make sense to assume it is
always available when building test-all.bin, defeating the feature check
speedup it provides.
The other tools/build/ users such as rtla, rv, etc call $(feature_check
libtracefs) to check its availability instead of using the test-all.bin
mechanism, stopping the build and asking for libtracefs-devel to be
installed.
Remove it from FEATURE_TESTS_BASIC to not have it as available, as noted
by Ian Rogers during review.
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Tomas Glozar <tglozar@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
libtracefs isn't used by perf but not having it installed causes build
warnings.
Given the library isn't used, there is no need for the configuration or
warnings so remove.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250929170600.59000-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module.
- Bump the minimum version of LLVM for building the kernel to 15.0.0.
- Upgrade several userspace API checks in headers_check.pl to errors.
- Unify and consolidate CONFIG_WERROR / W=e handling.
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e.
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs).
- Enable -Werror unconditionally when building host programs
(hostprogs).
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS.
- Miscellaneous small changes to scripts and configuration files.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaNrp6QAKCRAdayaRccAa
ljxRAP4hYocKXeWsiJzkTB199P4QUGWf220a9elBmtdJEed07gD/VBnCbSOxG3RO
vS8qbJHwxUFL7a+mDV8RIVXSt99NpAg=
=psG/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nathan Chancellor:
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module
- Bump the minimum version of LLVM for building the kernel to 15.0.0
- Upgrade several userspace API checks in headers_check.pl to errors
- Unify and consolidate CONFIG_WERROR / W=e handling
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs)
- Enable -Werror unconditionally when building host programs
(hostprogs)
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS
- Miscellaneous small changes to scripts and configuration files
* tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits)
modpost: Initialize builtin_modname to stop SIGSEGVs
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o
modpost: Create modalias for builtin modules
modpost: Add modname to mod_device_table alias
scsi: Always define blogic_pci_tbl structure
kbuild: extract modules.builtin.modinfo from vmlinux.unstripped
kbuild: keep .modinfo section in vmlinux.unstripped
kbuild: always create intermediate vmlinux.unstripped
s390: vmlinux.lds.S: Reorder sections
KMSAN: Remove tautological checks
objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY
lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs
riscv: Unconditionally use linker relaxation
riscv: Remove version check for LTO_CLANG selects
powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault()
mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER
arm64: Remove tautological LLVM Kconfig conditions
ARM: Clean up definition of ARM_HAS_GROUP_RELOCS
...
- Fixes watchdog test to exit when device doesn't support keep alive
- Fix missing header build complaints during out of tree build
- A few minor fixes to git ignore
- MAINTAINERS file change to update dma_map_benchmark
-----BEGIN PGP SIGNATURE-----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=Z4UE
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- Fix watchdog test to exit when device doesn't support keep-alive
- Fix missing header build complaints during out of tree build
- A few minor fixes to git ignore
- MAINTAINERS file change to update dma_map_benchmark
* tag 'linux_kselftest-next-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
MAINTAINERS: add myself and Barry to dma_map_benchmark maintainers
selftests/kexec: Ignore selftest binary
selftests: always install UAPI headers to the correct directory
selftests/kselftest_harness: Add harness-selftest.expected to TEST_FILES
selftests: watchdog: skip ping loop if WDIOF_KEEPALIVEPING not supported
- A seven patch series adds a new parameterized test features
KUnit parameterized tests currently support two primary methods for
getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
These limitations are fixed with a parameterized test method.
- Fixes issues in kunit build artifacts cleanup,
- Fixes parsing skipped test problem in kselftest framework,
- Enables PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
-----BEGIN PGP SIGNATURE-----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=VfHu
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- New parameterized test features
KUnit parameterized tests supported two primary methods for getting
parameters:
- Defining custom logic within a generate_params() function.
- Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC() macros
with a pre-defined static array and passing the created
*_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating
parameters sequentially via generate_params() is inefficient or
overly complex.
These limitations are fixed with a parameterized test method
- Fix issues in kunit build artifacts cleanup
- Fix parsing skipped test problem in kselftest framework
- Enable PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
* tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Extend kconfig help text for KUNIT_UML_PCI
rust: kunit: allow `cfg` on `test`s
kunit: qemu_configs: Add MIPS configurations
kunit: Enable PCI on UML without triggering WARN()
Documentation: kunit: Document new parameterized test features
kunit: Add example parameterized test with direct dynamic parameter array setup
kunit: Add example parameterized test with shared resource management using the Resource API
kunit: Enable direct registration of parameter arrays to a KUnit test
kunit: Pass parameterized test context to generate_params()
kunit: Introduce param_init/exit for parameterized test context management
kunit: Add parent kunit for parameterized test context
kunit: tool: Accept --raw_output=full as an alias of 'all'
kunit: tool: Parse skipped tests from kselftest.h
kunit: Always descend into kunit directory during build
- Add new thermal driver for the Renesas RZ/G3S SoC (Claudiu Beznea)
- Add new thermal driver for the Renesas RZ/G3E SoC (John Madieu)
- Add support for new platform power slider feature to the Intel
int340x driver (Srinivas Pandruvada).
- Add new Tegra114-specific SOCTHERM driver and document Tegra114
SOCTHERM Thermal Management System in DT bindings (Svyatoslav Ryhel)
- Add temperature sensor channel to thermal-generic-adc (Svyatoslav
Ryhel)
- Add support for per-SoC default trim values to the Renesas rcar_gen3
thermal driver, use it for adding R-Car V4H default trim values, fix
a comment typo in that driver and document Gen4 support in its
Kconfig entry (Marek Vasut)
- Fix mapping SoCs to generic Gen4 entry in the Renesas rcar_gen3
thermal driver (Wolfram Sang)
- Document the TSU unit in the r9a08g045-tsu and r9a09g047-tsu DT
bindings (Claudiu Beznea, John Madieu)
- Make LMH select QCOM_SCM and add missing IRQ includes to the
qcom/lmh thermal driver (Dmitry Baryshkov)
- Fix incorrect error message in the qcom/lmh thermal driver (Sumeet
Pawnikar)
- Add QCS615 compatible to tsens thermal DT bindings (Gaurav Kohli)
- Document the Glymur temperature sensor in qcom-tsens thermal DT
bindings (Manaf Meethalavalappu Pallikunhi)
- Make k3_j72xx_bandgap thermal driver register the thermal sensor
with hwmon (Michael Walle)
- Tighten GRF requirements in the rockchip thermal DT bindings,
silence a GRF warning in the rockchip thermal driver and unify
struct rockchip_tsadc_chip format in it (Sebastian Reichel)
- Update the Step-wise thermal governor to allow it to reduce the
cooling level earlier if thermal zone temperature is dropping
and clean it up (Rafael Wysocki)
- Clean up the thermal testing code (Rafael Wysocki)
- Assorted cleanups of thermal drivers (Jiapeng Chong, Salah Triki,
Osama Abdelkader)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjamT4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1BOwH/3ZL/GN+iJ7oFU/jOW4EktnLowCMgIKF
DURhmrZRoqJzZUY8PXysUekXYmniT6Itzv2h4psKMihn/khtapmkRkE23exmR9Gy
h5V4Nxbx4Ero6YfZ3KT4+AY1x2eRO6aDY29EdIAVeWacwOleTPhUvP70d5dZTHdy
QYi21qZarrkG3uiiNrBfgRW2IAcvQ37G1dy6fxJrURhUG3E9u2P9C9REBwQfkxBj
LxaV42oiQNU0S5+r4/0f1UbqR88FTh/X4xmpEFHK+zWewKYdYhXHBdCYlcegH7oO
WwQW8u3ofR/COpFNPdWrpDb9fYia0fbcJ131CVmAy8RySVd4dBAPKDM=
=okDy
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These are mostly thermal driver updates, including new thermal drivers
for Renesas RZ/G3S and Renesas RZ/G3E SoCs, a new power slider
platform feature support in the Intel int340x thermal driver, a new
Tegra114- specific SOCTHERM driver and more.
There is also a Step-wise thermal governor update allowing it to start
reducing cooling somewhat earlier if the temperature of the given
thermal zone is falling down and a thermal testing code cleanup.
Specifics:
- Add new thermal driver for the Renesas RZ/G3S SoC (Claudiu Beznea)
- Add new thermal driver for the Renesas RZ/G3E SoC (John Madieu)
- Add support for new platform power slider feature to the Intel
int340x driver (Srinivas Pandruvada).
- Add new Tegra114-specific SOCTHERM driver and document Tegra114
SOCTHERM Thermal Management System in DT bindings (Svyatoslav
Ryhel)
- Add temperature sensor channel to thermal-generic-adc (Svyatoslav
Ryhel)
- Add support for per-SoC default trim values to the Renesas
rcar_gen3 thermal driver, use it for adding R-Car V4H default trim
values, fix a comment typo in that driver and document Gen4 support
in its Kconfig entry (Marek Vasut)
- Fix mapping SoCs to generic Gen4 entry in the Renesas rcar_gen3
thermal driver (Wolfram Sang)
- Document the TSU unit in the r9a08g045-tsu and r9a09g047-tsu DT
bindings (Claudiu Beznea, John Madieu)
- Make LMH select QCOM_SCM and add missing IRQ includes to the
qcom/lmh thermal driver (Dmitry Baryshkov)
- Fix incorrect error message in the qcom/lmh thermal driver (Sumeet
Pawnikar)
- Add QCS615 compatible to tsens thermal DT bindings (Gaurav Kohli)
- Document the Glymur temperature sensor in qcom-tsens thermal DT
bindings (Manaf Meethalavalappu Pallikunhi)
- Make k3_j72xx_bandgap thermal driver register the thermal sensor
with hwmon (Michael Walle)
- Tighten GRF requirements in the rockchip thermal DT bindings,
silence a GRF warning in the rockchip thermal driver and unify
struct rockchip_tsadc_chip format in it (Sebastian Reichel)
- Update the Step-wise thermal governor to allow it to reduce the
cooling level earlier if thermal zone temperature is dropping and
clean it up (Rafael Wysocki)
- Clean up the thermal testing code (Rafael Wysocki)
- Assorted cleanups of thermal drivers (Jiapeng Chong, Salah Triki,
Osama Abdelkader)"
* tag 'thermal-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (37 commits)
thermal/drivers/renesas/rzg3e: Fix add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: qcom-tsens: Document the Glymur temperature Sensor
thermal/drivers/renesas/rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal/drivers/thermal-generic-adc: Add temperature sensor channel
dt-bindings: thermal: rockchip: Tighten grf requirements
thermal/drivers/rockchip: Shut up GRF warning
thermal/drivers/rockchip: Unify struct rockchip_tsadc_chip format
thermal/drivers/renesas/rzg3s: Add thermal driver for the Renesas RZ/G3S SoC
dt-bindings: thermal: r9a08g045-tsu: Document the TSU unit
thermal/drivers/k3_j72xx_bandgap: Register sensors with hwmon
thermal/drivers/rcar_gen3: Fix mapping SoCs to generic Gen4 entry
thermal/drivers/tegra: Add Tegra114 specific SOCTHERM driver
dt-bindings: thermal: add Tegra114 soctherm header
thermal/drivers/tegra/soctherm-fuse: Prepare calibration for Tegra114 support
dt-bindings: thermal: Document Tegra114 SOCTHERM Thermal Management System
thermal/drivers/rcar_gen3: Document Gen4 support in Kconfig entry
thermal/drivers/rcar_gen3: Fix comment typo
drivers/thermal/qcom/lmh: Fix incorrect error message
thermal/drivers/qcom/lmh: Add missing IRQ includes
...
- Add SoundWire File Table (SWFT) signature to ACPICA (Maciej Strozek)
- Rearrange local variable definition involving #ifdef in ACPICA to
avoid using uninitialized variables (Zhe Qiao)
- Allow ACPICA to skip Global Lock initialization (Huacai Chen)
- Apply ACPI_NONSTRING in more places in ACPICA and fix two regressions
related to incorrect ACPI_NONSTRING usage (Ahmed Salem)
- Fix printing CDAT table header when dissasebling CDAT AML (Ahmed
Salem)
- Use acpi_ds_clear_operands() in acpi_ds_call_control_method() in
ACPICA (Hans de Goede)
- Update dsmethod.c in ACPICA to address unused variable warning (Saket
Dumbre)
- Print error messages in ACPICA for too few or too many control method
arguments (Saket Dumbre)
- Update ACPICA version to 20250807 (Saket Dumbre)
- Fix largest possible resource descriptor index in ACPICA (Dmitry
Antipov)
- Add Back-Invalidate restriction to CXL Window for CEDT in ACPICA
(Davidlohr Bueso).
- Add the package type to acceptable Arg3 types for _DSM in ACPICA
because ACPI_TYPE_ANY does not cover it (Saket Dumbre)
- Fix return values in ap_is_valid_checksum() in the acpidump utility
in ACPICA (Kaushlendra Kumar)
- Add Intel CVS ACPI HIDs to acpi_ignore_dep_ids[] so it is not
regarded as real dependency (Hans de Goede)
- Use ACPI_FREE() for freeing an ACPI object in description_show() in
the ACPI sysfs-related code (Kaushlendra Kumar)
- Fix memory leak in the ACPI processor idle driver registration error
code path and optimize ACPI idle driver registration (Huisong Li,
Rafael Wysocki)
- Add module import namespace to the ACPI processor idle driver (Rafael
Wysocki)
- Eliminate static variable flat_state_cnt from the ACPI processor idle
driver (Rafael Wysocki)
- Release cpufreq policy references using __free() in the ACPI
processor thremal driver (Zihuan Zhang)
- Remove unused empty stubs of some functions and rearrange function
declarations in a header file in the ACPI processor driver (Huisong
Li)
- Redefine two functions as void in the ACPI processor driver (Rafael
Wysocki)
- Stop exposing global variable acpi_idle_driver in the ACPI processor
driver (Huisong Li)
- Fix ACPI buffer properties extraction for data-only subnodes
represented as _DSD-equivalent packages (Rafael Wysocki)
- Fix handling of ACPI data-only subnodes represented as _DSD-equivalent
packages in the case when they are embedded in larger _DSD-equivalent
packages and clean up acpi_nondev_subnode_extract() (Rafael Wysocki)
- Skip ACPI IRQ override on ASUS Vivobook Pro N6506CU (Sam van Kampen)
- Add power resource init function and use it for introducing an HP
EliteBook 855 G7 WWAN modem power resource quirk (Maciej Szmigiero)
- Add support for DBG2 RISC-V SBI port subtype and Precise Baud Rate
field to the ACPI SPCR table parser (Chen Pei)
- Eliminate a dummy local variable from the ACPI thermal driver (Rafael
Wysocki)
- Fold two simple functions into their only caller in the ACPI fan
driver (Rafael Wysocki)
- Force native backlight on Lenovo 82K8 in the ACPI backlight (video)
driver (Mario Limonciello)
- Add missing sysfs_remove_group() for ACPI_TAD_RT (Daniel Tang)
- Skip PRM handlers with NULL handler_address or NULL VA in the ACPI
PRM driver (Shang song)
- Remove redundant assignments in erst_dbg_{ioctl|write}() in the ACPI
APEI driver (Thorsten Blum)
- Allow the ACPI APEI EINJ to handle more types of addresses than just
MMIO (Jiaqi Yan)
- Use str_low_high() helper in two places in the ACPI code (Chelsy
Ratnawat)
- Use str_plural() to simplify the PNP code (Xichao Zhao)
- Fix signedness issues in read/write helpers in the ACPI AML debugger
interface (Amir Mohammad)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjaj3ESHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1mKgH/A5eTwqfiQFvkhgQU/mP9v8Y0yV8p0qE
W6xtzixsplk2bpV6IPcG8KA13EZMDGwkU+5xq2Jpsi/tipV58eyWv/i7TNaWNasM
QaX7mVik/QOw2hb6Jdef2RdgJOwj1J6UimR+i58HNX0hlBTPsMyqY0yHf6gXDzNM
CzS/A9kJUSvpCHav2tPoCr19ZLm+2GbgLoomGlqaM/Mxb6VyD7WnDeUYY2hOeZ4q
pFabFcEMjB7SOHv5sDLCKzy/r9+AspM9GVRgLKiJkMv/DQ4YWJd4ZRarFQWD48ff
sMX/DEg4M+YsaGCyHKLujloDpMnmg3MQYdvtmaf/Anf4VM/fkZPDkCY=
=YK1m
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include an ACPICA update (upstream revision 20250807 with a few
fixes on top), fixes and cleanups of the ACPI processor driver, fixes
and cleanups of the ACPI properties management code, one more ACPI IRQ
resource management quirk, one more ACPI backlight quirk, an ACPI
device enumeration quirk related to _DEP, a power resource quirk
related to WWAN modem for HP EliteBook 855 G7, ACPI SPCR table parser
extensions, an ACPI APEI EINJ driver update allowing it to handle more
address types, and several assorted cleanups of ACPI drivers and PNP
code.
Specifics:
- Add SoundWire File Table (SWFT) signature to ACPICA (Maciej
Strozek)
- Rearrange local variable definition involving #ifdef in ACPICA to
avoid using uninitialized variables (Zhe Qiao)
- Allow ACPICA to skip Global Lock initialization (Huacai Chen)
- Apply ACPI_NONSTRING in more places in ACPICA and fix two
regressions related to incorrect ACPI_NONSTRING usage (Ahmed Salem)
- Fix printing CDAT table header when dissasebling CDAT AML (Ahmed
Salem)
- Use acpi_ds_clear_operands() in acpi_ds_call_control_method() in
ACPICA (Hans de Goede)
- Update dsmethod.c in ACPICA to address unused variable warning
(Saket Dumbre)
- Print error messages in ACPICA for too few or too many control
method arguments (Saket Dumbre)
- Update ACPICA version to 20250807 (Saket Dumbre)
- Fix largest possible resource descriptor index in ACPICA (Dmitry
Antipov)
- Add Back-Invalidate restriction to CXL Window for CEDT in ACPICA
(Davidlohr Bueso)
- Add the package type to acceptable Arg3 types for _DSM in ACPICA
because ACPI_TYPE_ANY does not cover it (Saket Dumbre)
- Fix return values in ap_is_valid_checksum() in the acpidump utility
in ACPICA (Kaushlendra Kumar)
- Add Intel CVS ACPI HIDs to acpi_ignore_dep_ids[] so it is not
regarded as real dependency (Hans de Goede)
- Use ACPI_FREE() for freeing an ACPI object in description_show() in
the ACPI sysfs-related code (Kaushlendra Kumar)
- Fix memory leak in the ACPI processor idle driver registration
error code path and optimize ACPI idle driver registration (Huisong
Li, Rafael Wysocki)
- Add module import namespace to the ACPI processor idle driver
(Rafael Wysocki)
- Eliminate static variable flat_state_cnt from the ACPI processor
idle driver (Rafael Wysocki)
- Release cpufreq policy references using __free() in the ACPI
processor thremal driver (Zihuan Zhang)
- Remove unused empty stubs of some functions and rearrange function
declarations in a header file in the ACPI processor driver (Huisong
Li)
- Redefine two functions as void in the ACPI processor driver (Rafael
Wysocki)
- Stop exposing global variable acpi_idle_driver in the ACPI
processor driver (Huisong Li)
- Fix ACPI buffer properties extraction for data-only subnodes
represented as _DSD-equivalent packages (Rafael Wysocki)
- Fix handling of ACPI data-only subnodes represented as
_DSD-equivalent packages in the case when they are embedded in
larger _DSD-equivalent packages and clean up
acpi_nondev_subnode_extract() (Rafael Wysocki)
- Skip ACPI IRQ override on ASUS Vivobook Pro N6506CU (Sam van
Kampen)
- Add power resource init function and use it for introducing an HP
EliteBook 855 G7 WWAN modem power resource quirk (Maciej Szmigiero)
- Add support for DBG2 RISC-V SBI port subtype and Precise Baud Rate
field to the ACPI SPCR table parser (Chen Pei)
- Eliminate a dummy local variable from the ACPI thermal driver
(Rafael Wysocki)
- Fold two simple functions into their only caller in the ACPI fan
driver (Rafael Wysocki)
- Force native backlight on Lenovo 82K8 in the ACPI backlight (video)
driver (Mario Limonciello)
- Add missing sysfs_remove_group() for ACPI_TAD_RT (Daniel Tang)
- Skip PRM handlers with NULL handler_address or NULL VA in the ACPI
PRM driver (Shang song)
- Remove redundant assignments in erst_dbg_{ioctl|write}() in the
ACPI APEI driver (Thorsten Blum)
- Allow the ACPI APEI EINJ to handle more types of addresses than
just MMIO (Jiaqi Yan)
- Use str_low_high() helper in two places in the ACPI code (Chelsy
Ratnawat)
- Use str_plural() to simplify the PNP code (Xichao Zhao)
- Fix signedness issues in read/write helpers in the ACPI AML
debugger interface (Amir Mohammad)"
* tag 'acpi-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (50 commits)
ACPI: debug: fix signedness issues in read/write helpers
ACPI: processor: Do not expose global variable acpi_idle_driver
ACPI: SPCR: Support Precise Baud Rate field
ACPI: processor: idle: Redefine two functions as void
ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
ACPI: processor: idle: Rearrange declarations in header file
ACPI: processor: Remove unused empty stubs of some functions
ACPI: property: Adjust failure handling in acpi_nondev_subnode_extract()
ACPI: property: Do not pass NULL handles to acpi_attach_data()
ACPI: property: Add code comments explaining what is going on
ACPI: property: Disregard references in data-only subnode lists
ACPI: property: Fix buffer properties extraction for subnodes
ACPI: SPCR: Add support for DBG2 RISC-V SBI port subtype
ACPI: APEI: EINJ: Allow more types of addresses except MMIO
ACPI: APEI: Remove redundant assignments in erst_dbg_{ioctl|write}()
ACPICA: acpidump: fix return values in ap_is_valid_checksum()
ACPICA: ACPI_TYPE_ANY does not include the package type
ACPICA: CEDT: Add Back-Invalidate restriction to CXL Window
ACPICA: Fix largest possible resource descriptor index
ACPICA: Update version to 20250807
...
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange
freq QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver
to simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq core
to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md Sadre
Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix supported
hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not sufficient
to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi devfreq
driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance in
the mtk-cci devfreq driver probe and remove a redundant condition from
an if () statement in that driver (Dan Carpenter, Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf() in
cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle driver
and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that funtion
easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API (Brian
Norris)
- Clear power.must_resume in noirq suspend error path to avoid resuming
a dependant device under a suspended parent or supplier (Rafael
Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode and
combine exit paths in power_down() to avoid code duplication (Rafael
Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that do
bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjafbMSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO174EH/jAm4GBn1sbjMt0CybSHTTP9iryTiN6m
cXML5OpMoLbTnngfXjbEe9t52Fc0YV4awCG/S8Ufbut6ubWOEaVzInlw3zQAeE7c
V91ioxKrodrykpBxn5UFyCxpT2NZWteWl5rOEPeN7j+hqS4I4GTO0HsSo+E+1Y9F
DKELrbkLsn7rHy+ZvrOhcvq1IZE8gvINuji0QEf1cZz1VrgrLbQHUFqySpCUJw3F
/MfnA3l0kA2TXQ+UpDWJw8l1weZpXpOPJiyhYQKKeYHVA4osBwiFA/9pq+8Xb/AJ
GORHIl9y3x+JDXkEYyqmLn0k4FbHCX+4p5tpV9YDHebtP8dTLJBDF5Q=
=d4BP
-----END PGP SIGNATURE-----
Merge tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of these are cpufreq changes, which has been a recurring
pattern for a few recent cycles.
Those changes include new hardware support (AN7583 SoC support in the
airoha cpufreq driver, ipq5424 support in the qcom-nvmem cpufreq
driver, MT8196 support in the mediatek cpufreq driver, AM62D2 support
in the ti cpufreq driver), DT bindings and Rust code updates, cleanups
of the core and governors, and multiple driver fixes and cleanups.
Beyond that, there are hibernation fixes (some remaining 6.16 cycle
fallout and an issue related to hybrid suspend in the amdgpu driver),
cleanups of the PM core code, runtime PM documentation update, cpuidle
and power capping cleanups, and tooling updates.
Specifics:
- Rearrange variable declarations involving __free() in the cpufreq
core and intel_pstate driver to follow common coding style (Rafael
Wysocki)
- Fix object lifecycle issue in update_qos_request(), rearrange freq
QoS updates using __free(), and adjust frequency percentage
computations in the intel_pstate driver (Rafael Wysocki)
- Update intel_pstate to allow it to enable HWP without EPP if the
new DEC (Dynamic Efficiency Control) HW feature is enabled (Rafael
Wysocki)
- Use on_each_cpu_mask() in drv_write() in the ACPI cpufreq driver to
simplify the code (Rafael Wysocki)
- Use likely() optimization in intel_pstate_sample() (Yaxiong Tian)
- Remove dead EPB-related code from intel_pstate (Srinivas
Pandruvada)
- Use scope-based cleanup for cpufreq policy references in multiple
cpufreq drivers (Zihuan Zhang)
- Avoid calling get_governor() for the first policy in the cpufreq
core to simplify the initial policy path (Zihuan Zhang)
- Clean up the cpufreq core in multiple places (Zihuan Zhang)
- Use int type to store negative error codes in the cpufreq core and
update the speedstep-lib to use int for error codes (Qianfeng Rong)
- Update the efficient idle check for Intel extended Families in the
ondemand cpufreq governor (Sohil Mehta)
- Replace sscanf() with kstrtouint() in the conservative cpufreq
governor (Kaushlendra Kumar)
- Rename CpumaskVar::as[_mut]_ref to from_raw[_mut] in the cpumask
Rust code and mark CpumaskVar as transparent (Alice Ryhl, Baptiste
Lepers)
- Update ARef and AlwaysRefCounted imports from sync::aref in the OPP
Rust code (Shankari Anand)
- Add support for AN7583 SoC to the airoha cpufreq driver (Christian
Marangi)
- Enable cpufreq for ipq5424 in the qcom-nvmem cpufreq driver (Md
Sadre Alam)
- Add support for MT8196 to the mediatek-hw cpufreq driver, refactor
that driver and add mediatek,mt8196-cpufreq-hw DT binding (Nicolas
Frattaroli)
- Avoid redundant conditions in the mediatek cpufreq driver (Liao
Yuanhong)
- Add support for AM62D2 to the ti cpufreq driver and blocklist
ti,am62d2 SoC in dt-platdev (Paresh Bhagat)
- Support more speed grades on AM62Px SoC in the ti cpufreq driver,
allow all silicon revisions to support OPPs in it, and fix
supported hardware for 1GHz OPP (Judith Mendez)
- Add QCS615 compatible to DT bindings for cpufreq-qcom-hw (Taniya
Das)
- Minor assorted updates of the scmi, longhaul, CPPC, and armada-37xx
cpufreq drivers (Akhilesh Patil, BowenYu, Dennis Beier, and Florian
Fainelli)
- Remove outdated cpufreq-dt.txt (Frank Li)
- Fix python gnuplot package names in the amd_pstate_tracer utility
(Kuan-Wei Chiu)
- Saravana Kannan will maintain the virtual-cpufreq driver (Saravana
Kannan)
- Prevent CPU capacity updates after registering a perf domain from
failing on a first CPU that is not present (Christian Loehle)
- Add support for the cases in which frequency alone is not
sufficient to uniquely identify an OPP (Krishna Chaitanya Chundru)
- Use to_result() for OPP error handling in Rust (Onur Özkan)
- Add support for LPDDR5 on Rockhip RK3588 SoC to rockchip-dfi
devfreq driver (Nicolas Frattaroli)
- Fix an issue where DDR cycle counts on RK3588/RK3528 with LPDDR4(X)
are reported as half by adding a cycle multiplier to the DFI driver
in rockchip-dfi devfreq-event driver (Nicolas Frattaroli)
- Fix missing error pointer dereference check of regulator instance
in the mtk-cci devfreq driver probe and remove a redundant
condition from an if () statement in that driver (Dan Carpenter,
Liao Yuanhong)
- Fail cpuidle device registration if there is one already to avoid
sysfs-related issues (Rafael Wysocki)
- Use sysfs_emit()/sysfs_emit_at() instead of sprintf()/scnprintf()
in cpuidle (Vivek Yadav)
- Fix device and OF node leaks at probe in the qcom-spm cpuidle
driver and drop unnecessary initialisations from it (Johan Hovold)
- Remove unnecessary address-of operators from the intel_idle cpuidle
driver (Kaushlendra Kumar)
- Rearrange main loop in menu_select() to make the code in that
funtion easier to follow (Rafael Wysocki)
- Convert values in microseconds to ktime using us_to_ktime() where
applicable in the intel_idle power capping driver (Xichao Zhao)
- Annotate loops walking device links in the power management core
code as _srcu and add macros for walking device links to reduce the
likelihood of coding mistakes related to them (Rafael Wysocki)
- Document time units for *_time functions in the runtime PM API
(Brian Norris)
- Clear power.must_resume in noirq suspend error path to avoid
resuming a dependant device under a suspended parent or supplier
(Rafael Wysocki)
- Fix GFP mask handling during hybrid suspend and make the amdgpu
driver handle hybrid suspend correctly (Mario Limonciello, Rafael
Wysocki)
- Fix GFP mask handling after aborted hibernation in platform mode
and combine exit paths in power_down() to avoid code duplication
(Rafael Wysocki)
- Use vmalloc_array() and vcalloc() in the hibernation core to avoid
open-coded size computations (Qianfeng Rong)
- Fix typo in hibernation core code comment (Li Jun)
- Call pm_wakeup_clear() in the same place where other functions that
do bookkeeping prior to suspend_prepare() are called (Samuel Wu)
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)"
* tag 'pm-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
PM: hibernate: Combine return paths in power_down()
PM: hibernate: Restrict GFP mask in power_down()
PM: hibernate: Fix pm_hibernation_mode_is_suspend() build breakage
PM: runtime: Documentation: ABI: Document time units for *_time
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
drm/amd: Fix hybrid sleep
PM: hibernate: Add pm_hibernation_mode_is_suspend()
PM: hibernate: Fix hybrid-sleep
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/power/x86/amd_pstate_tracer: Fix python gnuplot package names
cpufreq: Replace pointer subtraction with iteration macro
cpuidle: Fail cpuidle device registration if there is one already
...
linux/unaligned.h include dependency is causing issues for libbpf's
Github mirror due to {get,put}_unaligned_be32() usage.
So get rid of it by implementing custom variants of those macros that
will work both in kernel and Github mirror repos.
Also switch round_up() to roundup(), as the former is not available in
Github mirror (and is just a subtly more specific variant of roundup()
anyways).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Move sha256 implementation out of already large and unwieldy libbpf.c
into libbpf_utils.c where we'll keep reusable helpers.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Get rid of str_err.{c,h} by moving implementation of libbpf_errstr()
into libbpf_utils.c and declarations into libbpf_internal.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
libbpf_strerror_r() is not exposed as public API and neither is it used
inside libbpf itself. Remove it altogether.
Same for STRERR_BUFSIZE, it's just an orphaned leftover constant which
we missed to clean up some time earlier.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Libbpf is missing one convenient place to put common "utils"-like code
that is generic and usable from multiple places. Use libbpf_errno.c as
the base for more generic libbpf_utils.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Add a test case for BPF_NEG operation on CONST_PTR_TO_MAP. Tests if
BPF_NEG operation on map_ptr is rejected in unprivileged mode and is a
scalar value and do not trigger Oops in privileged mode.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251001191739.2323644-3-listout@listout.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We will segfault once we call realloc in bpf_get_addrs due to
wrong size argument.
Fixes: 6302bdeb91 ("selftests/bpf: Add a kprobe_multi subtest to use addrs instead of syms")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 0e2fb011a0 ("selftests/bpf: Clean up open-coded gettid syscall
invocations") addressed the issue that older libc may not have a gettid()
function call wrapper for the associated syscall.
The uprobe syscall tests got in from tip tree, using sys_gettid in there.
Fixes: 0e2fb011a0 ("selftests/bpf: Clean up open-coded gettid syscall invocations")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Removed in favor of the shell script version.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'import perf' test needs to set up a path to the python module as
well as to know the python command to invoke.
These are hard coded at build time to be build a directory and the
python used in the build, which is less than desirable.
Avoid the hard coded values by reusing the existing shell script python
setup and determine a potential built python module via the path of the
perf executable.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BRBE emits IRQ and ERET branches for branching and returning from
trapped instructions. Add a test that loops on a trapped instruction
(MRS - Read special register) for this.
Extend the expected 'any_call' branches to include FAULT_DATA and
FAULT_INST as these are emitted by BRBE.
Reviewed-by: Ian Rogers <irogers@google.com>
Co-developed-by: German Gomez <german.gomez@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adam Young <admiyo@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test that SYSCALL type branches are emitted from the expected 'getppid'
symbol. Test that when only 'k' is used, sources addresses are all in
the kernel. Test that no kernel addresses leak by checking for them in
the 'u' test.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adam Young <admiyo@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
check_branches() will be used by other tests in a later commit so make
it a function. And the any_call filters are duplicated and will also
be extended in a later commit, so move them to a variable.
No functional changes intended.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adam Young <admiyo@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Don't open evsels on all CPUs, open them just on the CPUs they
support. This avoids opening say an e-core event on a p-core and
getting a failure - achieve this by getting rid of the "all_cpu_map".
In install_pe functions don't use the cpu_map_idx as a CPU number,
translate the cpu_map_idx, which is a dense index into the cpu_map
skipping holes at the beginning, to a proper CPU number.
Before:
```
$ perf stat --bpf-counters -a -e cycles,instructions -- sleep 1
Performance counter stats for 'system wide':
<not supported> cpu_atom/cycles/
566,270,672 cpu_core/cycles/
<not supported> cpu_atom/instructions/
572,792,836 cpu_core/instructions/ # 1.01 insn per cycle
1.001595384 seconds time elapsed
```
After:
```
$ perf stat --bpf-counters -a -e cycles,instructions -- sleep 1
Performance counter stats for 'system wide':
443,299,201 cpu_atom/cycles/
1,233,919,737 cpu_core/cycles/
213,634,112 cpu_atom/instructions/ # 0.48 insn per cycle
2,758,965,527 cpu_core/instructions/ # 2.24 insn per cycle
1.001699485 seconds time elapsed
```
Fixes: 7fac83aaf2 ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: bpf@vger.kernel.org
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce the API surface that is in bpf_counter.h, this helps compiler
analysis like unused static function, makes it easier to set a
breakpoint and just makes it easier to see the code is self contained.
When code is shared between BPF C code, put it inside HAVE_BPF_SKEL.
Move transitively found #includes into appropriate C files.
No functional change.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove the arch-specific guard around TYPE_STATE_MAX_REGS and define it
as 32 for all architectures.
The architecture that perf is built on may not match the architecture
that produced the perf.data file, so relying on __powerpc__ or similar
is fragile.
Using 32 as a fixed upper bound is safe since it is greater than the
previous maximum of 16.
Add a comment to clarify that TYPE_STATE_MAX_REGS is an arch-independent
maximum rather than a build-time choice.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create samples from DTL entries for displaying in 'perf report'
and 'perf script'.
When the different PERF_RECORD_XX records are processed from perf
session, powerpc_vpadtl_process_event() will be invoked.
For each of the PERF_RECORD_XX record, compare the timestamp of perf
record with timestamp of top element in the auxtrace heap.
Process the auxtrace queue if the timestamp of element from heap is
lower than timestamp from entry in perf record.
Sometimes it could happen that one buffer is only partially processed.
if the timestamp of occurrence of another event is more than currently
processed element in the queue, it will move on to next perf record.
So keep track of position of buffer to continue processing next time.
Update the timestamp of the auxtrace heap with the timestamp of last
processed entry from the auxtrace buffer.
Generate perf sample for each entry in the dispatch trace log.
Fill in the sample details:
- sample ip is picked from srr0 field of dtl_entry
- sample cpu is picked from processor_id of dtl_entry
- sample id is from sample_id of powerpc_vpadtl
- cpumode is set to PERF_RECORD_MISC_KERNEL
- Additionally save the details in raw_data of sample.
This is to print the relevant fields in perf_sample__fprintf_synth()
when called from builtin-script
The sample is processed by calling perf_session__deliver_synth_event()
so that it gets included in perf report.
Sample Output:
./perf record -a -e sched:*,vpa_dtl/dtl_all/ -c 1000000000 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.300 MB perf.data ]
./perf report
# Samples: 321 of event 'vpa-dtl'
# Event count (approx.): 321
#
# Children Self Command Shared Object Symbol
# ........ ........ ....... ................. ..............................
#
100.00% 100.00% swapper [kernel.kallsyms] [k] plpar_hcall_norets_notrace
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the Dispatch Trace Log data is collected along with other events
like sched tracepoint events, it needs to be correlated and present
interleaved along with these events.
Perf events can be collected parallely across the CPUs. Hence it needs
to be ensured events/dtl entries are processed in timestamp order.
An auxtrace_queue is created for each CPU.
Data within each queue is in increasing order of timestamp. Each
auxtrace queue has a array/list of auxtrace buffers.
When processing the auxtrace buffer, the data is mmapp'ed.
All auxtrace queues is maintained in auxtrace heap.
Each queue has a queue number and a timestamp.
The queues are sorted/added to head based on the time stamp.
So always the lowest timestamp (entries to be processed first) is on top
of the heap.
The auxtrace queue needs to be allocated and heap needs to be populated
in the sorted order of timestamp.
The queue needs to be filled with data only once via
powerpc_vpadtl__update_queues() function.
powerpc_vpadtl__setup_queues() iterates through all the entries to
allocate and setup the auxtrace queue.
To add to auxtrace heap, it is required to fetch the timebase of first
entry for each of the queue.
The first entry in the queue for VPA DTL PMU has the boot timebase,
frequency details which are needed to get timestamp which is required to
correlate with other events.
The very next entry is the actual trace data that provides timestamp for
occurrence of DTL event.
Formula used to get the timestamp from dtl entry is:
((timbase from DTL entry - boot time) / frequency) * 1000000000
powerpc_vpadtl_decode() adds the boot time and frequency as part of
powerpc_vpadtl_queue structure so that it can be reused.
Each of the dtl_entry is of 48 bytes size. Sometimes it could happen
that one buffer is only partially processed (if the timestamp of
occurrence of another event is more than currently processed element in
queue, it will move on to next event).
In order to keep track of position of buffer, additional fields is added
to powerpc_vpadtl_queue structure.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dispatch Trace Log details are captured as-is in PERF_RECORD_AUXTRACE
records.
To present dtl entries as samples, create an event with name as
"vpa-dtl" and type PERF_TYPE_SYNTH.
Add perf_synth_id, "PERF_SYNTH_POWERPC_VPA_DTL" as config value for the
event.
Create a sample id to be a fixed offset from evsel id.
To present the relevant fields from the "struct dtl_entry", prepare the
entries as events of type PERF_TYPE_SYNTH.
By defining as PERF_TYPE_SYNTH type, samples can be printed as part of
perf_sample__fprintf_synth in builtin-script.c
From powerpc_vpadtl_process_auxtrace_info(), invoke
auxtrace_queues__process_index() function which will queue the auxtrace
buffers by invoke auxtrace_queues__add_event().
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add VPA DTL PMU auxtrace process function for "perf report -D".
The auxtrace event processing functions are defined in file
"util/powerpc-vpadtl.c".
Data structures used includes "struct powerpc_vpadtl_queue", "struct
powerpc_vpadtl" to store the auxtrace buffers in queue. Different
PERF_RECORD_XXX are generated during recording.
PERF_RECORD_AUXTRACE_INFO is processed first since it is of type
perf_user_event_type and perf session event delivers
perf_session__process_user_event() first.
Define function powerpc_vpadtl_process_auxtrace_info() to handle the
processing of PERF_RECORD_AUXTRACE_INFO records.
In this function, initialize the aux buffer queues using
auxtrace_queues__init().
Setup the required infrastructure for aux data processing.
The data is collected per CPU and auxtrace_queue is created for each
CPU.
Define powerpc_vpadtl_process_event() function to process
PERF_RECORD_AUXTRACE records.
In this, add the event to queue using auxtrace_queues__add_event() and
process the buffer in powerpc_vpadtl_dump_event().
The first entry in the buffer with timebase as zero has boot timebase
and frequency.
Remaining data is of format for "struct powerpc_vpadtl_entry".
Define the translation for dispatch_reasons and preempt_reasons, report
this when dump trace is invoked via powerpc_vpadtl_dump()
Sample output:
./perf record -a -e sched:*,vpa_dtl/dtl_all/ -c 1000000000 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.300 MB perf.data ]
./perf report -D
0 0 0x39b10 [0x30]: PERF_RECORD_AUXTRACE size: 0x690 offset: 0 ref: 0 idx: 0 tid: -1 cpu: 0
.
. ... VPA DTL PMU data: size 1680 bytes, entries is 35
. 00000000: boot_tb: 21349649546353231, tb_freq: 512000000
. 00000030: dispatch_reason:decrementer interrupt, preempt_reason:H_CEDE, enqueue_to_dispatch_time:7064, ready_to_enqueue_time:187, waiting_to_ready_time:6611773
. 00000060: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:146, ready_to_enqueue_time:0, waiting_to_ready_time:15359437
. 00000090: dispatch_reason:decrementer interrupt, preempt_reason:H_CEDE, enqueue_to_dispatch_time:4868, ready_to_enqueue_time:232, waiting_to_ready_time:5100709
. 000000c0: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:179, ready_to_enqueue_time:0, waiting_to_ready_time:30714243
. 000000f0: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:197, ready_to_enqueue_time:0, waiting_to_ready_time:15350648
. 00000120: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:213, ready_to_enqueue_time:0, waiting_to_ready_time:15353446
. 00000150: dispatch_reason:priv doorbell, preempt_reason:H_CEDE, enqueue_to_dispatch_time:212, ready_to_enqueue_time:0, waiting_to_ready_time:15355126
. 00000180: dispatch_reason:decrementer interrupt, preempt_reason:H_CEDE, enqueue_to_dispatch_time:6368, ready_to_enqueue_time:164, waiting_to_ready_time:5104665
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The powerpc PMU collecting Dispatch Trace Log (DTL) entries makes use of
AUX support in perf infrastructure.
The PMU driver has the functionality to collect trace entries in the aux
buffer.
On the tools side, this data is made available as PERF_RECORD_AUXTRACE
records.
This record is generated by "perf record" command.
To enable the creation of PERF_RECORD_AUXTRACE, add functions to
initialize auxtrace records ie "auxtrace_record__init()".
Fill in fields for other callbacks like info_priv_size, info_fill, free,
recording options etc.
Define auxtrace_type as PERF_AUXTRACE_VPA_DTL. Add header file to
define vpa dtl pmu specific details.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.ibm.com>
Tested-by: Tejas Manhas <tejas05@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Aditya Bodkhe <Aditya.Bodkhe1@ibm.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A union is used to set the priv value in thread (a void*) to a boolean
value through type punning. Undefined behavior sanitizer fails on this.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test cases from perftool_testsuite are affected by the current
directory where the test are run. For this reason, the test
driver has to change the directory to the base_dir for references to
work correctly.
Utilize absolute paths when sourcing and referencing other scripts so
that the current working directory doesn't impact the test cases.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jakub Brnak <jbrnak@redhat.com>
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- "the the"
- "in in"
- "a a"
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Markus Heidelberg <m.heidelberg@cab.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.17-rc8).
Conflicts:
tools/testing/selftests/drivers/net/bonding/Makefile
87951b5664 selftests: bonding: add test for passive LACP mode
c2377f1763 selftests: bonding: add test for LACP actor port priority
Adjacent changes:
drivers/net/ethernet/cadence/macb.h
fca3dc859b net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf16 net: macb: Add TAPRIO traffic scheduling support
drivers/net/ethernet/cadence/macb_main.c
fca3dc859b net: macb: remove illusion about TBQPH/RBQPH being per-queue
89934dbf16 net: macb: Add TAPRIO traffic scheduling support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Only contains small bugfixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTg4lxklFHAidmUs57B+h1jyw5bOAUCaNmibgAKCRDB+h1jyw5b
OP8VAQDzrMGp77iFvfAFRsFuGYXLpWgNd8aWzFVMmPz/Kts3yAD/X1RnJsak5l5g
iiuZTPijrZeyQaO0uX4UV/XVHzxU2Ac=
=IenX
-----END PGP SIGNATURE-----
Merge tag 'nolibc-20250928-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
"Only small bugfixes and cleanups"
* tag 'nolibc-20250928-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc:
tools/nolibc: add stdbool.h to nolibc includes
tools/nolibc: make time_t robust if __kernel_old_time_t is missing in host headers
selftests/nolibc: remove outdated comment about construct order
selftests/nolibc: fix EXPECT_NZ macro
tools/nolibc: drop wait4() support
kselftest/arm64: tpidr2: Switch to waitpid() over wait4()
tools/nolibc: fold llseek fallback into lseek()
tools/nolibc: remove __nolibc_enosys() fallback from fork functions
tools/nolibc: remove __nolibc_enosys() fallback from dup2()
tools/nolibc: remove __nolibc_enosys() fallback from *at() functions
tools/nolibc: remove __nolibc_enosys() fallback from time64-related functions
tools/nolibc: use tabs instead of spaces for indentation
tools/nolibc: avoid error in dup2() if old fd equals new fd
selftests/nolibc: always compile the kernel with GCC
selftests/nolibc: don't pass CC to toplevel Makefile
selftests/nolibc: deduplicate invocations of toplevel Makefile
selftests/nolibc: be more specific about variables affecting nolibc-test
tools/nolibc: fix error return value of clock_nanosleep()
-----BEGIN PGP SIGNATURE-----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=LeQi
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
- Further consolidation of the VDSO infrastructure and the common data
store.
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
-----BEGIN PGP SIGNATURE-----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=i3UB
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
- Plug the ptrace_may_access() race against a concurrent exec() which
allows to pass the check before the target's process transition in
exec() by taking a read lock on signal->ext_update_lock.
- A large set of cleanups and enhancement to the futex selftests. The
bulk of changes is the conversion to the kselftest harness.
-----BEGIN PGP SIGNATURE-----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=vUpN
-----END PGP SIGNATURE-----
Merge tag 'locking-futex-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex updates from Thomas Gleixner:
"A set of updates for futexes and related selftests:
- Plug the ptrace_may_access() race against a concurrent exec() which
allows to pass the check before the target's process transition in
exec() by taking a read lock on signal->ext_update_lock.
- A large set of cleanups and enhancement to the futex selftests. The
bulk of changes is the conversion to the kselftest harness"
* tag 'locking-futex-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
selftest/futex: Fix spelling mistake "boundarie" -> "boundary"
selftests/futex: Remove logging.h file
selftests/futex: Drop logging.h include from futex_numa
selftests/futex: Refactor futex_numa_mpol with kselftest_harness.h
selftests/futex: Refactor futex_priv_hash with kselftest_harness.h
selftests/futex: Refactor futex_waitv with kselftest_harness.h
selftests/futex: Refactor futex_requeue with kselftest_harness.h
selftests/futex: Refactor futex_wait with kselftest_harness.h
selftests/futex: Refactor futex_wait_private_mapped_file with kselftest_harness.h
selftests/futex: Refactor futex_wait_unitialized_heap with kselftest_harness.h
selftests/futex: Refactor futex_wait_wouldblock with kselftest_harness.h
selftests/futex: Refactor futex_wait_timeout with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi_signal_restart with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi_mismatched_ops with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi with kselftest_harness.h
selftests: kselftest: Create ksft_print_dbg_msg()
futex: Don't leak robust_list pointer on exec race
selftest/futex: Compile also with libnuma < 2.0.16
selftest/futex: Reintroduce "Memory out of range" numa_mpol's subtest
selftest/futex: Make the error check more precise for futex_numa_mpol
...
1) Protect the event mask modification against the membarrier() IPI as
otherwise the RmW operation is unprotected and events might be lost.
2) Fix the weak symbol reference in rseq selftests
The current weak RSEQ symbols definitions which were added to allow
static linkage are not working correctly as the effectively re-define
the glibc symbols leading to multiple versions of the symbols when
compiled with -fno-common. Mark them as 'extern' to convert them from
weak symbol definitions to weak symbol references. That works with
static and dynamic linkage independent of -fcommon and -fno-common.
-----BEGIN PGP SIGNATURE-----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=VV+N
-----END PGP SIGNATURE-----
Merge tag 'core-rseq-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq updates from Thomas Gleixner:
"Two fixes for RSEQ:
- Protect the event mask modification against the membarrier() IPI as
otherwise the RmW operation is unprotected and events might be lost
- Fix the weak symbol reference in rseq selftests
The current weak RSEQ symbols definitions which were added to allow
static linkage are not working correctly as they effectively
re-define the glibc symbols leading to multiple versions of the
symbols when compiled with -fno-common.
Mark them as 'extern' to convert them from weak symbol definitions
to weak symbol references. That works with static and dynamic
linkage independent of -fcommon and -fno-common"
* tag 'core-rseq-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Use weak symbol reference, not definition, to link with glibc
rseq: Protect event mask against membarrier IPI
of an AMD platform like the security processor (ASP) firmware, modules
etc, for example. The intent being that these updates are interim,
live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor generating
unexpected interrupts and injecting them into such guest, thus
interfering with its operation in an unexpected and negative manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory. The problem
was that the toolchain-generated version of the code was being
executed from a different mapping of memory than what was "assumed"
during code generation, needing an ever-growing pile of fixups for
absolute memory references which are invalid in the early, 1:1 memory
mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this:
https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com
- The usual cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=shVa
-----END PGP SIGNATURE-----
Merge tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=sMTE
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Make UMIP instruction detection more robust
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
* tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases)
x86/umip: Check that the instruction opcode is at least two bytes
Documentation/x86/topology: Detail CPUID leaves used for topology enumeration
x86/cpu/topology: Define AMD64_CPUID_EXT_FEAT MSR
x86/cpu/topology: Check for X86_FEATURE_XTOPOLOGY instead of passing has_xtopology
x86/cpu/cacheinfo: Simplify cacheinfo_amd_init_llc_id() using _cpuid4_info
x86/cpu: Rename and move CPU model entry for Diamond Rapids
x86/cpu: Detect FreeBSD Bhyve hypervisor
present on the AMD Bulldozer uarch
-----BEGIN PGP SIGNATURE-----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=mUtz
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 instruction decoder update from Borislav Petkov:
- Add instruction decoding support for the XOP-prefixed instruction set
present on the AMD Bulldozer uarch
[ These instructions don't normally happen, but a X86_NATIVE_CPU build
on a bulldozer host can make the compiler then use these unusual
instruction encodings ]
* tag 'x86_misc_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/insn: Add XOP prefix instructions decoder support
Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This
is in reaction to the recently fixed refcount bugs, which
could have been detected earlier and could have mitigated
the bug somewhat. (Thomas Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation
for sframes. (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which
gives a substantial speedup. (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver
(Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sVXH
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This is in
reaction to the recently fixed refcount bugs, which could have been
detected earlier and could have mitigated the bug somewhat (Thomas
Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation for
sframes (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which gives a
substantial speedup (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver (Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)"
* tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
selftests/bpf: Fix uprobe_sigill test for uprobe syscall error value
uprobes/x86: Return error from uprobe syscall when not called from trampoline
perf: Skip user unwind if the task is a kernel thread
perf: Simplify get_perf_callchain() user logic
perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL
perf: Have get_perf_callchain() return NULL if crosstask and user are set
perf: Remove get_perf_callchain() init_nr argument
perf/x86: Print PMU counters bitmap in x86_pmu_show_pmu_cap()
perf/x86/intel: Add ICL_FIXED_0_ADAPTIVE bit into INTEL_FIXED_BITS_MASK
perf/x86/intel: Change macro GLOBAL_CTRL_EN_PERF_METRICS to BIT_ULL(48)
perf/x86: Add PERF_CAP_PEBS_TIMING_INFO flag
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
perf/x86/intel: Use early_initcall() to hook bts_init()
uprobes: Remove redundant __GFP_NOWARN
selftests/seccomp: validate uprobe syscall passes through seccomp
seccomp: passthrough uprobe systemcall without filtering
selftests/bpf: Fix uprobe syscall shadow stack test
selftests/bpf: Change test_uretprobe_regs_change for uprobe and uretprobe
selftests/bpf: Add uprobe_regs_equal test
selftests/bpf: Add optimized usdt variant for basic usdt test
...
Add support for virtualizing Control-flow Enforcement Technology (CET) on
Intel (Shadow Stacks and Indirect Branch Tracking) and AMD (Shadow Stacks).
CET is comprised of two distinct features, Shadow Stacks (SHSTK) and Indirect
Branch Tracking (IBT), that can be utilized by software to help provide
Control-flow integrity (CFI). SHSTK defends against backward-edge attacks
(a.k.a. Return-oriented programming (ROP)), while IBT defends against
forward-edge attacks (a.k.a. similarly CALL/JMP-oriented programming (COP/JOP)).
Attackers commonly use ROP and COP/JOP methodologies to redirect the control-
flow to unauthorized targets in order to execute small snippets of code,
a.k.a. gadgets, of the attackers choice. By chaining together several gadgets,
an attacker can perform arbitrary operations and circumvent the system's
defenses.
SHSTK defends against backward-edge attacks, which execute gadgets by modifying
the stack to branch to the attacker's target via RET, by providing a second
stack that is used exclusively to track control transfer operations. The
shadow stack is separate from the data/normal stack, and can be enabled
independently in user and kernel mode.
When SHSTK is is enabled, CALL instructions push the return address on both the
data and shadow stack. RET then pops the return address from both stacks and
compares the addresses. If the return addresses from the two stacks do not
match, the CPU generates a Control Protection (#CP) exception.
IBT defends against backward-edge attacks, which branch to gadgets by executing
indirect CALL and JMP instructions with attacker controlled register or memory
state, by requiring the target of indirect branches to start with a special
marker instruction, ENDBRANCH. If an indirect branch is executed and the next
instruction is not an ENDBRANCH, the CPU generates a #CP. Note, ENDBRANCH
behaves as a NOP if IBT is disabled or unsupported.
From a virtualization perspective, CET presents several problems. While SHSTK
and IBT have two layers of enabling, a global control in the form of a CR4 bit,
and a per-feature control in user and kernel (supervisor) MSRs (U_CET and S_CET
respectively), the {S,U}_CET MSRs can be context switched via XSAVES/XRSTORS.
Practically speaking, intercepting and emulating XSAVES/XRSTORS is not a viable
option due to complexity, and outright disallowing use of XSTATE to context
switch SHSTK/IBT state would render the features unusable to most guests.
To limit the overall complexity without sacrificing performance or usability,
simply ignore the potential virtualization hole, but ensure that all paths in
KVM treat SHSTK/IBT as usable by the guest if the feature is supported in
hardware, and the guest has access to at least one of SHSTK or IBT. I.e. allow
userspace to advertise one of SHSTK or IBT if both are supported in hardware,
even though doing so would allow a misbehaving guest to use the unadvertised
feature.
Fully emulating SHSTK and IBT would also require significant complexity, e.g.
to track and update branch state for IBT, and shadow stack state for SHSTK.
Given that emulating large swaths of the guest code stream isn't necessary on
modern CPUs, punt on emulating instructions that meaningful impact or consume
SHSTK or IBT. However, instead of doing nothing, explicitly reject emulation
of such instructions so that KVM's emulator can't be abused to circumvent CET.
Disable support for SHSTK and IBT if KVM is configured such that emulation of
arbitrary guest instructions may be required, specifically if Unrestricted
Guest (Intel only) is disabled, or if KVM will emulate a guest.MAXPHYADDR that
is smaller than host.MAXPHYADDR.
Lastly disable SHSTK support if shadow paging is enabled, as the protections
for the shadow stack are novel (shadow stacks require Writable=0,Dirty=1, so
that they can't be directly modified by software), i.e. would require
non-trivial support in the Shadow MMU.
Note, AMD CPUs currently only support SHSTK. Explicitly disable IBT support
so that KVM doesn't over-advertise if AMD CPUs add IBT, and virtualizing IBT
in SVM requires KVM modifications.
-----BEGIN PGP SIGNATURE-----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=zsBl
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-cet-6.18' of https://github.com/kvm-x86/linux into HEAD
KVM x86 CET virtualization support for 6.18
Add support for virtualizing Control-flow Enforcement Technology (CET) on
Intel (Shadow Stacks and Indirect Branch Tracking) and AMD (Shadow Stacks).
CET is comprised of two distinct features, Shadow Stacks (SHSTK) and Indirect
Branch Tracking (IBT), that can be utilized by software to help provide
Control-flow integrity (CFI). SHSTK defends against backward-edge attacks
(a.k.a. Return-oriented programming (ROP)), while IBT defends against
forward-edge attacks (a.k.a. similarly CALL/JMP-oriented programming (COP/JOP)).
Attackers commonly use ROP and COP/JOP methodologies to redirect the control-
flow to unauthorized targets in order to execute small snippets of code,
a.k.a. gadgets, of the attackers choice. By chaining together several gadgets,
an attacker can perform arbitrary operations and circumvent the system's
defenses.
SHSTK defends against backward-edge attacks, which execute gadgets by modifying
the stack to branch to the attacker's target via RET, by providing a second
stack that is used exclusively to track control transfer operations. The
shadow stack is separate from the data/normal stack, and can be enabled
independently in user and kernel mode.
When SHSTK is is enabled, CALL instructions push the return address on both the
data and shadow stack. RET then pops the return address from both stacks and
compares the addresses. If the return addresses from the two stacks do not
match, the CPU generates a Control Protection (#CP) exception.
IBT defends against backward-edge attacks, which branch to gadgets by executing
indirect CALL and JMP instructions with attacker controlled register or memory
state, by requiring the target of indirect branches to start with a special
marker instruction, ENDBRANCH. If an indirect branch is executed and the next
instruction is not an ENDBRANCH, the CPU generates a #CP. Note, ENDBRANCH
behaves as a NOP if IBT is disabled or unsupported.
From a virtualization perspective, CET presents several problems. While SHSTK
and IBT have two layers of enabling, a global control in the form of a CR4 bit,
and a per-feature control in user and kernel (supervisor) MSRs (U_CET and S_CET
respectively), the {S,U}_CET MSRs can be context switched via XSAVES/XRSTORS.
Practically speaking, intercepting and emulating XSAVES/XRSTORS is not a viable
option due to complexity, and outright disallowing use of XSTATE to context
switch SHSTK/IBT state would render the features unusable to most guests.
To limit the overall complexity without sacrificing performance or usability,
simply ignore the potential virtualization hole, but ensure that all paths in
KVM treat SHSTK/IBT as usable by the guest if the feature is supported in
hardware, and the guest has access to at least one of SHSTK or IBT. I.e. allow
userspace to advertise one of SHSTK or IBT if both are supported in hardware,
even though doing so would allow a misbehaving guest to use the unadvertised
feature.
Fully emulating SHSTK and IBT would also require significant complexity, e.g.
to track and update branch state for IBT, and shadow stack state for SHSTK.
Given that emulating large swaths of the guest code stream isn't necessary on
modern CPUs, punt on emulating instructions that meaningful impact or consume
SHSTK or IBT. However, instead of doing nothing, explicitly reject emulation
of such instructions so that KVM's emulator can't be abused to circumvent CET.
Disable support for SHSTK and IBT if KVM is configured such that emulation of
arbitrary guest instructions may be required, specifically if Unrestricted
Guest (Intel only) is disabled, or if KVM will emulate a guest.MAXPHYADDR that
is smaller than host.MAXPHYADDR.
Lastly disable SHSTK support if shadow paging is enabled, as the protections
for the shadow stack are novel (shadow stacks require Writable=0,Dirty=1, so
that they can't be directly modified by software), i.e. would require
non-trivial support in the Shadow MMU.
Note, AMD CPUs currently only support SHSTK. Explicitly disable IBT support
so that KVM doesn't over-advertise if AMD CPUs add IBT, and virtualizing IBT
in SVM requires KVM modifications.
- Don't (re)check L1 intercepts when completing userspace I/O to fix a flaw
where a misbehaving usersepace (a.k.a. syzkaller) could swizzle L1's
intercepts and trigger a variety of WARNs in KVM.
- Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the MSR is
supposed to exist for v2 PMUs.
- Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs.
- Clean up KVM's vector hashing code for delivering lowest priority IRQs.
- Clean up the fastpath handler code to only handle IPIs and WRMSRs that are
actually "fast", as opposed to handling those that KVM _hopes_ are fast, and
in the process of doing so add fastpath support for TSC_DEADLINE writes on
AMD CPUs.
- Clean up a pile of PMU code in anticipation of adding support for mediated
vPMUs.
- Add support for the immediate forms of RDMSR and WRMSRNS, sans full
emulator support (KVM should never need to emulate the MSRs outside of
forced emulation and other contrived testing scenarios).
- Clean up the MSR APIs in preparation for CET and FRED virtualization, as
well as mediated vPMU support.
- Rejecting a fully in-kernel IRQCHIP if EOIs are protected, i.e. for TDX VMs,
as KVM can't faithfully emulate an I/O APIC for such guests.
- KVM_REQ_MSR_FILTER_CHANGED into a generic RECALC_INTERCEPTS in preparation
for mediated vPMU support, as KVM will need to recalculate MSR intercepts in
response to PMU refreshes for guests with mediated vPMUs.
- Misc cleanups and minor fixes.
-----BEGIN PGP SIGNATURE-----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=9IB0
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.18' of https://github.com/kvm-x86/linux into HEAD
KVM x86 changes for 6.18
- Don't (re)check L1 intercepts when completing userspace I/O to fix a flaw
where a misbehaving usersepace (a.k.a. syzkaller) could swizzle L1's
intercepts and trigger a variety of WARNs in KVM.
- Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the MSR is
supposed to exist for v2 PMUs.
- Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs.
- Clean up KVM's vector hashing code for delivering lowest priority IRQs.
- Clean up the fastpath handler code to only handle IPIs and WRMSRs that are
actually "fast", as opposed to handling those that KVM _hopes_ are fast, and
in the process of doing so add fastpath support for TSC_DEADLINE writes on
AMD CPUs.
- Clean up a pile of PMU code in anticipation of adding support for mediated
vPMUs.
- Add support for the immediate forms of RDMSR and WRMSRNS, sans full
emulator support (KVM should never need to emulate the MSRs outside of
forced emulation and other contrived testing scenarios).
- Clean up the MSR APIs in preparation for CET and FRED virtualization, as
well as mediated vPMU support.
- Rejecting a fully in-kernel IRQCHIP if EOIs are protected, i.e. for TDX VMs,
as KVM can't faithfully emulate an I/O APIC for such guests.
- KVM_REQ_MSR_FILTER_CHANGED into a generic RECALC_INTERCEPTS in preparation
for mediated vPMU support, as KVM will need to recalculate MSR intercepts in
response to PMU refreshes for guests with mediated vPMUs.
- Misc cleanups and minor fixes.
- Add #DE coverage in the fastops test (the only exception that's guest-
triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR), Sierra
Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=A/nr
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.18' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.18
- Add #DE coverage in the fastops test (the only exception that's guest-
triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR), Sierra
Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
- Added SBI FWFT extension for Guest/VM with misaligned
delegation and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V such as
access_tracking_perf_test, dirty_log_perf_test,
memslot_modification_stress_test, memslot_perf_test,
mmu_stress_test, and rseq_test
- Added SBI v3.0 PMU enhancements in KVM and perf driver
-----BEGIN PGP SIGNATURE-----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=BCyU
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.18-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.18
- Added SBI FWFT extension for Guest/VM with misaligned
delegation and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V such as
access_tracking_perf_test, dirty_log_perf_test,
memslot_modification_stress_test, memslot_perf_test,
mmu_stress_test, and rseq_test
- Added SBI v3.0 PMU enhancements in KVM and perf driver
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This will
hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then allows
a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
-----BEGIN PGP SIGNATURE-----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=iAL3
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.18
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This will
hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then allows
a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly programming
at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios
where an xarray's spinlock was nested with a *raw* spinlock
- Permit stage-2 read permission aborts which are possible in the case
of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaMHCvxccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFqbCAP9ygpb3tkpAPkbaB68IwyJgGD/C
59f2NTUGkzak20SjHAD+IcvQV8GemDsGNvSvjpb08KrNWMUxeuOBiAp/IvqrqwU=
=VrcD
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.17-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.17, round #3
- Invalidate nested MMUs upon freeing the PGD to avoid WARNs when
visiting from an MMU notifier
- Fixes to the TLB match process and TLB invalidation range for
managing the VCNR pseudo-TLB
- Prevent SPE from erroneously profiling guests due to UNKNOWN reset
values in PMSCR_EL1
- Fix save/restore of host MDCR_EL2 to account for eagerly programming
at vcpu_load() on VHE systems
- Correct lock ordering when dealing with VGIC LPIs, avoiding scenarios
where an xarray's spinlock was nested with a *raw* spinlock
- Permit stage-2 read permission aborts which are possible in the case
of NV depending on the guest hypervisor's stage-2 translation
- Call raw_spin_unlock() instead of the internal spinlock API
- Fix parameter ordering when assigning VBAR_EL1
[Pull into kvm/master to fix conflicts. - Paolo]
- Extensive cpuset code cleanup and refactoring work with no functional
changes: CPU mask computation logic refactoring, introducing new helpers,
removing redundant code paths, and improving error handling for better
maintainability.
- A few bug fixes to cpuset including fixes for partition creation failures
when isolcpus is in use, missing error returns, and null pointer access
prevention in free_tmpmasks().
- Core cgroup changes include replacing the global percpu_rwsem with
per-threadgroup rwsem when writing to cgroup.procs for better scalability,
workqueue conversions to use WQ_PERCPU and system_percpu_wq to prepare for
workqueue default switching from percpu to unbound, and removal of unused
code including the post_attach callback.
- New cgroup.stat.local time accounting feature that tracks frozen time
duration.
- Misc changes including selftests updates (new freezer time tests and
backward compatibility fixes), documentation sync, string function safety
improvements, and 64-bit division fixes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaNb1Sg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfLMAPwKwkvUg9DPJEuECRfM9woOOHyIWLp1DwUhpg1v
Zq0lkAEAmo/+IkJXGZ7TGF+wzSj7GFIugrILu3upzLCHzgYoDgs=
=39KF
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Extensive cpuset code cleanup and refactoring work with no functional
changes: CPU mask computation logic refactoring, introducing new
helpers, removing redundant code paths, and improving error handling
for better maintainability.
- A few bug fixes to cpuset including fixes for partition creation
failures when isolcpus is in use, missing error returns, and null
pointer access prevention in free_tmpmasks().
- Core cgroup changes include replacing the global percpu_rwsem with
per-threadgroup rwsem when writing to cgroup.procs for better
scalability, workqueue conversions to use WQ_PERCPU and
system_percpu_wq to prepare for workqueue default switching from
percpu to unbound, and removal of unused code including the
post_attach callback.
- New cgroup.stat.local time accounting feature that tracks frozen time
duration.
- Misc changes including selftests updates (new freezer time tests and
backward compatibility fixes), documentation sync, string function
safety improvements, and 64-bit division fixes.
* tag 'cgroup-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (39 commits)
cpuset: remove is_prs_invalid helper
cpuset: remove impossible warning in update_parent_effective_cpumask
cpuset: remove redundant special case for null input in node mask update
cpuset: fix missing error return in update_cpumask
cpuset: Use new excpus for nocpu error check when enabling root partition
cpuset: fix failure to enable isolated partition when containing isolcpus
Documentation: cgroup-v2: Sync manual toctree
cpuset: use partition_cpus_change for setting exclusive cpus
cpuset: use parse_cpulist for setting cpus.exclusive
cpuset: introduce partition_cpus_change
cpuset: refactor cpus_allowed_validate_change
cpuset: refactor out validate_partition
cpuset: introduce cpus_excl_conflict and mems_excl_conflict helpers
cpuset: refactor CPU mask buffer parsing logic
cpuset: Refactor exclusive CPU mask computation logic
cpuset: change return type of is_partition_[in]valid to bool
cpuset: remove unused assignment to trialcs->partition_root_state
cpuset: move the root cpuset write check earlier
cgroup/cpuset: Remove redundant rcu_read_lock/unlock() in spin_lock
cgroup: Remove redundant rcu_read_lock/unlock() in spin_lock
...
Update sapphirerapids events to v1.35 released in:
94ed947d7b9d993957a2
Also adds cpu_cstate_c0 and cpu_cstate_c6 metrics.
Event JSON automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update emeraldrapids events to v1.20 released in:
868b43395543681e2817
Also adds cpu_cstate_c0 and cpu_cstate_c6 metrics.
Event JSON automatically generated by:
https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Caleb Biggers <caleb.biggers@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Perry Taylor <perry.taylor@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building perf with LIBBPF_DYNAMIC=1 on a fedora system with
libbpf-devel 1.5 I it was breaking with:
util/bpf-event.c: In function ‘format_btf_variable’:
util/bpf-event.c:291:18: error: ‘const struct btf_dump_type_data_opts’ has no member named ‘emit_strings’
291 | .emit_strings = 1,
| ^~~~~~~~~~~~
util/bpf-event.c:291:33: error: initialized field overwritten [-Werror=override-init]
291 | .emit_strings = 1,
| ^
util/bpf-event.c:291:33: note: (near initialization for ‘opts.skip_names’)
Check the version before using that feature.
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need it to fix some other libbpf version dependent issues when
building with LIBBPF_DYNAMIC=1.
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building perf with LIBBPF_DYNAMIC (ie not the default static linking of
libbpf with perf) is breaking as the libbpf isn't version 1.7 or newer,
where dont_enable is added to bpf_perf_event_opts.
To avoid this breakage add a compile time version check and don't
declare the variable when not present.
Fixes: 5e2ac8e857 ("perf bpf-filter: Enable events manually")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: bpf@vger.kernel.org
Cc: Hao Ge <gehao@kylinos.cn>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Code organization cleanup. Separate internal types and accessors to
ext_internal.h to reduce the size of ext.c and improve maintainability.
- Prepare for cgroup sub-scheduler support by adding @sch parameter to
various functions and helpers, reorganizing scheduler instance handling,
and dropping obsolete helpers like scx_kf_exit() and kf_cpu_valid().
- Add new scx_bpf_cpu_curr() and scx_bpf_locked_rq() BPF helpers to provide
safer access patterns with proper RCU protection. scx_bpf_cpu_rq() is
deprecated with warnings due to potential race conditions.
- Improve debugging with migration-disabled counter in error state dumps,
SCX_EFLAG_INITIALIZED flag, bitfields for warning flags, and other
enhancements to help diagnose issues.
- Use cgroup_lock/unlock() for cgroup synchronization instead of
scx_cgroup_rwsem based synchronization. This is simpler and allows
enable/disable paths to synchronize against cgroup changes independent of
the CPU controller.
- rhashtable_lookup() replacement to avoid redundant RCU locking was
reverted due to RCU usage warnings. Will be redone once rhashtable is
updated to use rcu_dereference_all().
- Other misc updates and fixes including bypass handling improvements,
scx_task_iter_relock() improvements, tools/sched_ext updates, and
compatibility helpers.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaNbpHQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGTzWAP9cOG1O2DE0nCJJlDfGoJd1suz9quK+OrVdXhO+
6nnXoAEAonDP0jXtwoW9GVQFyj8WZ0mfV4QJk0OHM1CoOV5XkQY=
=Ev85
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Code organization cleanup. Separate internal types and accessors to
ext_internal.h to reduce the size of ext.c and improve
maintainability.
- Prepare for cgroup sub-scheduler support by adding @sch parameter to
various functions and helpers, reorganizing scheduler instance
handling, and dropping obsolete helpers like scx_kf_exit() and
kf_cpu_valid().
- Add new scx_bpf_cpu_curr() and scx_bpf_locked_rq() BPF helpers to
provide safer access patterns with proper RCU protection.
scx_bpf_cpu_rq() is deprecated with warnings due to potential race
conditions.
- Improve debugging with migration-disabled counter in error state
dumps, SCX_EFLAG_INITIALIZED flag, bitfields for warning flags, and
other enhancements to help diagnose issues.
- Use cgroup_lock/unlock() for cgroup synchronization instead of
scx_cgroup_rwsem based synchronization. This is simpler and allows
enable/disable paths to synchronize against cgroup changes
independent of the CPU controller.
- rhashtable_lookup() replacement to avoid redundant RCU locking was
reverted due to RCU usage warnings. Will be redone once rhashtable is
updated to use rcu_dereference_all().
- Other misc updates and fixes including bypass handling improvements,
scx_task_iter_relock() improvements, tools/sched_ext updates, and
compatibility helpers.
* tag 'sched_ext-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (28 commits)
Revert "sched_ext: Use rhashtable_lookup() instead of rhashtable_lookup_fast()"
sched_ext: Misc updates around scx_sched instance pointer
sched_ext: Drop scx_kf_exit() and scx_kf_error()
sched_ext: Add the @sch parameter to scx_dsq_insert_preamble/commit()
sched_ext: Drop kf_cpu_valid()
sched_ext: Add the @sch parameter to ext_idle helpers
sched_ext: Add the @sch parameter to __bstr_format()
sched_ext: Separate out scx_kick_cpu() and add @sch to it
tools/sched_ext: scx_qmap: Make debug output quieter by default
sched_ext: Make qmap dump operation non-destructive
sched_ext: Add SCX_EFLAG_INITIALIZED to indicate successful ops.init()
sched_ext: Use bitfields for boolean warning flags
sched_ext: Fix stray scx_root usage in task_can_run_on_remote_rq()
sched_ext: Improve SCX_KF_DISPATCH comment
sched_ext: Use rhashtable_lookup() instead of rhashtable_lookup_fast()
sched_ext: Verify RCU protection in scx_bpf_cpu_curr()
sched_ext: Add migration-disabled counter to error state dump
sched_ext: Fix NULL dereference in scx_bpf_cpu_rq() warning
tools/sched_ext: Add compat helper for scx_bpf_cpu_curr()
sched_ext: deprecation warn for scx_bpf_cpu_rq()
...
Add the tcp_port_share test binary to .gitignore to avoid
accidentally staging the build artifact.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250929163140.122383-1-krishnagopi487@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for making sure device can disappear while associations
exist. This is netdevsim-only since destroying real devices is
more tricky.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-9-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Test TCP MSS getting auto-adjusted. PSP adds an encapsulation overhead
of 40B per packet, when used in transport mode without any
virtualization cookie or other optional PSP header fields. The kernel
should adjust the MSS for a connection after PSP tx state is reached.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-8-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add test checking conditions which lead to connections breaking.
Using bad key or connection gets stuck if device key is rotated
twice.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-7-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add tests for exercising PSP associations for TCP sockets.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-6-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add basic tests for sending data over PSP and making sure that key
rotation toggles the MSB of the spi.
Deploy PSP responder on the remote end. We also need a healthy dose
of common helpers for setting up the connections, assertions and
interrogating socket state on the Python side.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-5-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
PSP tests need the remote system to support PSP, and some PSP capable
application to exchange data with. Create a simple PSP responder app
which we can build and deploy to the remote host. The tests themselves
can be written in Python but for ease of deploying the responder is in C
(using C YNL).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-4-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simple PSP test to getting info about PSP devices.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-3-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This introduces a test for IPSec offload over bonding, utilizing netdevsim
for the testing process, as veth interfaces do not support IPSec offload.
The test will ensure that the IPSec offload functionality remains operational
even after a failover event occurs in the bonding configuration.
Here is the test result:
TEST: bond_ipsec_offload (active_slave eth0) [ OK ]
TEST: bond_ipsec_offload (active_slave eth1) [ OK ]
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250925023304.472186-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to: Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira Rajeev, Cédric Le Goater, Christophe Leroy,
Erhard Furtner, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence, Kajol Jain, Kienan Stewart,
Linus Walleij, Mahesh Salgaonkar, Nam Cao, Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas Gleixner, Thomas Huth, Thorsten Blum,
Tyrel Datwyler, Venkat Rao Bagalkote,
-----BEGIN PGP SIGNATURE-----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=U2s/
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira
Rajeev, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence,
Kajol Jain, Kienan Stewart, Linus Walleij, Mahesh Salgaonkar, Nam Cao,
Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas
Gleixner, Thomas Huth, Thorsten Blum, Tyrel Datwyler, and Venkat Rao
Bagalkote.
* tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (49 commits)
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
genirq/msi: Remove msi_post_free()
powerpc/perf/vpa-dtl: Add documentation for VPA dispatch trace log PMU
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
docs: ABI: sysfs-bus-event_source-devices-vpa-dtl: Document sysfs event format entries for vpa_dtl pmu
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
powerpc/time: Expose boot_tb via accessor
powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure
powerpc/fprobe: fix updated fprobe for function-graph tracer
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
powerpc64/modules: replace stub allocation sentinel with an explicit counter
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
powerpc/603: Really copy kernel PGD entries into all PGDIRs
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
powerpc/pseries: HVPIPE changes to support migration
powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS
powerpc/pseries: Enable HVPIPE event message interrupt
...
First set of RISC-V updates for the v6.18 merge window, including:
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather than
open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if they
are available
- The ability to identity and communicate to userspace the presence of a
MIPS P8700-specific ISA extension, and to leverage its MIPS-specific PAUSE
implementation in cpu_relax()
- Several other miscellaneous cleanups
-----BEGIN PGP SIGNATURE-----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=nK3D
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather
than open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if
they are available
- The ability to identity and communicate to userspace the presence
of a MIPS P8700-specific ISA extension, and to leverage its
MIPS-specific PAUSE implementation in cpu_relax()
- Several other miscellaneous cleanups
* tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (39 commits)
riscv: errata: Fix the PAUSE Opcode for MIPS P8700
riscv: hwprobe: Document MIPS xmipsexectl vendor extension
riscv: hwprobe: Add MIPS vendor extension probing
riscv: Add xmipsexectl instructions
riscv: Add xmipsexectl as a vendor extension
dt-bindings: riscv: Add xmipsexectl ISA extension description
riscv: cpufeature: add validation for zfa, zfh and zfhmin
perf: riscv: skip empty batches in counter start
selftests: riscv: Add README for RISC-V KSelfTest
riscv: sbi: Switch to new sys-off handler API
riscv: Move vendor errata definitions to new header
RISC-V: ACPI: enable parsing the BGRT table
riscv: Enable ARCH_HAVE_NMI_SAFE_CMPXCHG
riscv: pi: use 'targets' instead of extra-y in Makefile
riscv: introduce asm/swab.h
riscv: mmap(): use unsigned offset type in riscv_sys_mmap
drivers/perf: riscv: Remove redundant ternary operators
riscv: mm: Use mmu-type from FDT to limit SATP mode
riscv: mm: Return intended SATP mode for noXlvl options
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
...
Confidential computing:
- Add support for accepting secrets from firmware (e.g. ACPI CCEL)
and mapping them with appropriate attributes.
CPU features:
- Advertise atomic floating-point instructions to userspace.
- Extend Spectre workarounds to cover additional Arm CPU variants.
- Extend list of CPUs that support break-before-make level 2 and
guarantee not to generate TLB conflict aborts for changes of mapping
granularity (BBML2_NOABORT).
- Add GCS support to our uprobes implementation.
Documentation:
- Remove bogus SME documentation concerning register state when
entering/exiting streaming mode.
Entry code:
- Switch over to the generic IRQ entry code (GENERIC_IRQ_ENTRY).
- Micro-optimise syscall entry path with a compiler branch hint.
Memory management:
- Enable huge mappings in vmalloc space even when kernel page-table
dumping is enabled.
- Tidy up the types used in our early MMU setup code.
- Rework rodata= for closer parity with the behaviour on x86.
- For CPUs implementing BBML2_NOABORT, utilise block mappings in the
linear map even when rodata= applies to virtual aliases.
- Don't re-allocate the virtual region between '_text' and '_stext',
as doing so confused tools parsing /proc/vmcore.
Miscellaneous:
- Clean-up Kconfig menuconfig text for architecture features.
- Avoid redundant bitmap_empty() during determination of supported
SME vector lengths.
- Re-enable warnings when building the 32-bit vDSO object.
- Avoid breaking our eggs at the wrong end.
Perf and PMUs:
- Support for v3 of the Hisilicon L3C PMU.
- Support for Hisilicon's MN and NoC PMUs.
- Support for Fujitsu's Uncore PMU.
- Support for SPE's extended event filtering feature.
- Preparatory work to enable data source filtering in SPE.
- Support for multiple lanes in the DWC PCIe PMU.
- Support for i.MX94 in the IMX DDR PMU driver.
- MAINTAINERS update (Thank you, Yicong).
- Minor driver fixes (PERF_IDX2OFF() overflow, CMN register offsets).
Selftests:
- Add basic LSFE check to the existing hwcaps test.
- Support nolibc in GCS tests.
- Extend SVE ptrace test to pass unsupported regsets and invalid vector
lengths.
- Minor cleanups (typos, cosmetic changes).
System registers:
- Fix ID_PFR1_EL1 definition.
- Fix incorrect signedness of some fields in ID_AA64MMFR4_EL1.
- Sync TCR_EL1 definition with the latest Arm ARM (L.b).
- Be stricter about the input fed into our AWK sysreg generator script.
- Typo fixes and removal of redundant definitions.
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree.
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls.
- Fix a node refcount imbalance in the PSCI device-tree code.
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4.
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM guests
can reliably query the underlying CPU types from the VMM.
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmjWlMIQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNIVYB/sHaFYmToEaK4ldMfTn4ZQ8yr9ZuTMLr/ji
zOm7wULP08wKIcp6t+1N6e7A8Wb3YSErxTywc4b9MqctIel1WvBMewjJd38xb2qO
hFCuRuWemfyt6Rw/EGMCP54yueLzKbnN4q+/Aks8jedWtS+AXY6McGCJOzMjuECL
zKb68Hqqb09YQ2b2BPSAiU9g42rotiIYppLaLbEdxUnw/eqfEN3wSrl92/LuBlqH
r2wZDnJwA5q8Iy9HWlnhg4Jax0Cs86jSJPIQLB6v3WWhc3HR49pm5cqYzYkUht9L
nA6eaWJiBl/+k3S+ftPKNzU8n04r15lqyNZE2FYfRk+0BPSacJOf
=kO15
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's good stuff across the board, including some nice mm
improvements for CPUs with the 'noabort' BBML2 feature and a clever
patch to allow ptdump to play nicely with block mappings in the
vmalloc area.
Confidential computing:
- Add support for accepting secrets from firmware (e.g. ACPI CCEL)
and mapping them with appropriate attributes.
CPU features:
- Advertise atomic floating-point instructions to userspace
- Extend Spectre workarounds to cover additional Arm CPU variants
- Extend list of CPUs that support break-before-make level 2 and
guarantee not to generate TLB conflict aborts for changes of
mapping granularity (BBML2_NOABORT)
- Add GCS support to our uprobes implementation.
Documentation:
- Remove bogus SME documentation concerning register state when
entering/exiting streaming mode.
Entry code:
- Switch over to the generic IRQ entry code (GENERIC_IRQ_ENTRY)
- Micro-optimise syscall entry path with a compiler branch hint.
Memory management:
- Enable huge mappings in vmalloc space even when kernel page-table
dumping is enabled
- Tidy up the types used in our early MMU setup code
- Rework rodata= for closer parity with the behaviour on x86
- For CPUs implementing BBML2_NOABORT, utilise block mappings in the
linear map even when rodata= applies to virtual aliases
- Don't re-allocate the virtual region between '_text' and '_stext',
as doing so confused tools parsing /proc/vmcore.
Miscellaneous:
- Clean-up Kconfig menuconfig text for architecture features
- Avoid redundant bitmap_empty() during determination of supported
SME vector lengths
- Re-enable warnings when building the 32-bit vDSO object
- Avoid breaking our eggs at the wrong end.
Perf and PMUs:
- Support for v3 of the Hisilicon L3C PMU
- Support for Hisilicon's MN and NoC PMUs
- Support for Fujitsu's Uncore PMU
- Support for SPE's extended event filtering feature
- Preparatory work to enable data source filtering in SPE
- Support for multiple lanes in the DWC PCIe PMU
- Support for i.MX94 in the IMX DDR PMU driver
- MAINTAINERS update (Thank you, Yicong)
- Minor driver fixes (PERF_IDX2OFF() overflow, CMN register offsets).
Selftests:
- Add basic LSFE check to the existing hwcaps test
- Support nolibc in GCS tests
- Extend SVE ptrace test to pass unsupported regsets and invalid
vector lengths
- Minor cleanups (typos, cosmetic changes).
System registers:
- Fix ID_PFR1_EL1 definition
- Fix incorrect signedness of some fields in ID_AA64MMFR4_EL1
- Sync TCR_EL1 definition with the latest Arm ARM (L.b)
- Be stricter about the input fed into our AWK sysreg generator
script
- Typo fixes and removal of redundant definitions.
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code.
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits)
arm64: cpufeature: Remove duplicate asm/mmu.h header
arm64: Kconfig: Make CPU_BIG_ENDIAN depend on BROKEN
perf/dwc_pcie: Fix use of uninitialized variable
arm/syscalls: mark syscall invocation as likely in invoke_syscall
Documentation: hisi-pmu: Add introduction to HiSilicon V3 PMU
Documentation: hisi-pmu: Fix of minor format error
drivers/perf: hisi: Add support for L3C PMU v3
drivers/perf: hisi: Refactor the event configuration of L3C PMU
drivers/perf: hisi: Extend the field of tt_core
drivers/perf: hisi: Extract the event filter check of L3C PMU
drivers/perf: hisi: Simplify the probe process of each L3C PMU version
drivers/perf: hisi: Export hisi_uncore_pmu_isr()
drivers/perf: hisi: Relax the event ID check in the framework
perf: Fujitsu: Add the Uncore PMU driver
arm64: map [_text, _stext) virtual address range non-executable+read-only
arm64/sysreg: Update TCR_EL1 register
arm64: Enable vmalloc-huge with ptdump
arm64: cpufeature: add Neoverse-V3AE to BBML2 allow list
arm64: errata: Apply workarounds for Neoverse-V3AE
arm64: cputype: Add Neoverse-V3AE definitions
...
This also does not have the non-experimental version, so converted to FO.
The comment in .pkt explains the detailed scenario.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-14-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sockopt-fastopen-key.pkt does not have the non-experimental
version, so the Experimental version is converted, FOEXP -> FO.
The test sets net.ipv4.tcp_fastopen_key=0-0-0-0 and instead
sets another key via setsockopt(TCP_FASTOPEN_KEY).
The first listener generates a valid cookie in response to TFO
option without cookie, and the second listner creates a TFO socket
using the valid cookie.
TCP_FASTOPEN_KEY is adjusted to use the common key in default.sh
so that we can use TFO_COOKIE and support dualstack. Similarly,
TFO_COOKIE_ZERO for the 0-0-0-0 key is defined.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-13-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These changes are applied to follow the imported packetdrill tests.
* Call setsockopt(TCP_FASTOPEN)
* Remove unnecessary accept() delay
* Add assertion for TCP states
* Rename to tcp_fastopen_server_trigger-rst-reconnect.pkt.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-12-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This imports the non-experimental version of opt34/*-trigger-rst.pkt.
| accept() | SYN data |
-----------------------------------+----------+----------+
listener-closed-trigger-rst.pkt | no | unread |
unread-data-closed-trigger-rst.pkt | yes | unread |
Both files test that close()ing a SYN_RECV socket with unread SYN data
triggers RST.
The files are renamed to have the common prefix, trigger-rst.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-11-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This imports the non-experimental version of opt34/reset-*.pkt.
| Child | RST | sk_err |
---------------------------------+---------+-------------------------------+---------+
reset-after-accept.pkt | TFO | after accept(), SYN_RECV | read() |
reset-close-with-unread-data.pkt | TFO | after accept(), SYN_RECV | write() |
reset-before-accept.pkt | TFO | before accept(), SYN_RECV | read() |
reset-non-tfo-socket.pkt | non-TFO | before accept(), ESTABLISHED | write() |
The first 3 files test scenarios where a SYN_RECV socket receives RST
before/after accept() and data in SYN must be read() without error,
but the following read() or fist write() will return ECONNRESET.
The last test is similar but with non-TFO socket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-10-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This imports the non-experimental version of icmp-before-accept.pkt.
This file tests the scenario where an ICMP unreachable packet for a
not-yet-accept()ed socket changes its state to TCP_CLOSE, but the
SYN data must be read without error, and the following read() returns
EHOSTUNREACH.
Note that this test support only IPv4 as icmp is used.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This imports the non-experimental version of fin-close-socket.pkt.
This file tests the scenario where a TFO child socket's state
transitions from SYN_RECV to CLOSE_WAIT before accept()ed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-8-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only difference between non-experimental vs experimental TFO
option handling is SYN+ACK generation.
When tcp_parse_fastopen_option() parses a TFO option, it sets
tcp_fastopen_cookie.exp to false if the option number is 34,
and true if 255.
The value is carried to tcp_options_write() to generate a TFO option
with the same option number.
Other than that, all the TFO handling is the same and the kernel must
generate the same cookie regardless of the option number.
Let's add a test for the handling so that we can consolidate
fastopen/server/ tests and fastopen/server/opt34 tests.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TFO_SERVER_WO_SOCKOPT1 is no longer enabled by default, and
each server test requires setsockopt(TCP_FASTOPEN).
Let's add a basic test for TFO_SERVER_WO_SOCKOPT1.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This imports basic TFO server tests from google/packetdrill.
The repository has two versions of tests for most scenarios; one uses
the non-experimental option (34), and the other uses the experimental
option (255) with 0xF989.
This only imports the following tests of the non-experimental version
placed in [0]. I will add a specific test for the experimental option
handling later.
| TFO | Cookie | Payload |
---------------------------+-----+--------+---------+
basic-rw.pkt | yes | yes | yes |
basic-zero-payload.pkt | yes | yes | no |
basic-cookie-not-reqd.pkt | yes | no | yes |
basic-non-tfo-listener.pkt | no | yes | yes |
pure-syn-data.pkt | yes | no | yes |
The original pure-syn-data.pkt missed setsockopt(TCP_FASTOPEN) and did
not test TFO server in some scenarios unintentionally, so setsockopt()
is added where needed. In addition, non-TFO scenario is stripped as
it is covered by basic-non-tfo-listener.pkt. Also, I added basic- prefix.
Link: https://github.com/google/packetdrill/tree/bfc96251310f/gtests/net/tcp/fastopen/server/opt34 #[0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP Fast Open cookie is generated in __tcp_fastopen_cookie_gen_cipher().
The cookie value is generated from src/dst IPs and a key configured by
setsockopt(TCP_FASTOPEN_KEY) or net.ipv4.tcp_fastopen_key.
The default.sh sets net.ipv4.tcp_fastopen_key, and the original packetdrill
defines the corresponding cookie as TFO_COOKIE in run_all.py. [0]
Then, each test does not need to care about the value, and we can easily
update TFO_COOKIE in case __tcp_fastopen_cookie_gen_cipher() changes the
algorithm.
However, some tests use the bare hex value for specific IPv4 addresses
and do not support IPv6.
Let's define the same TFO_COOKIE in ksft_runner.sh.
We will replace such bare hex values with TFO_COOKIE except for a single
test for setsockopt(TCP_FASTOPEN_KEY).
Link: https://github.com/google/packetdrill/blob/7230b3990f94/gtests/net/packetdrill/run_all.py#L65 #[0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To enable TCP Fast Open on a server, net.ipv4.tcp_fastopen must
have 0x2 (TFO_SERVER_ENABLE), and we need to do either
1. Call setsockopt(TCP_FASTOPEN) for the socket
2. Set 0x400 (TFO_SERVER_WO_SOCKOPT1) additionally to net.ipv4.tcp_fastopen
The default.sh sets 0x70403 so that each test does not need setsockopt().
(0x1 is TFO_CLIENT_ENABLE, and 0x70000 is ...???)
However, some tests overwrite net.ipv4.tcp_fastopen without
TFO_SERVER_WO_SOCKOPT1 and forgot setsockopt(TCP_FASTOPEN).
For example, pure-syn-data.pkt [0] tests non-TFO servers unintentionally,
except in the first scenario.
To prevent such an accident, let's require explicit setsockopt().
TFO_CLIENT_ENABLE is necessary for
tcp_syscall_bad_arg_fastopen-invalid-buf-ptr.pkt.
Link: https://github.com/google/packetdrill/blob/bfc96251310f/gtests/net/tcp/fastopen/server/opt34/pure-syn-data.pkt #[0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit forgot to update the ktap_set_plan call.
ktap_set_plan sets the number of tests (KSFT_NUM_TESTS), which must
match the number of executed tests (KTAP_CNT_PASS + KTAP_CNT_SKIP +
KTAP_CNT_XFAIL) in ktap_finished.
Otherwise, the selftest exit()s with 1.
Let's adjust KSFT_NUM_TESTS based on supported protocols.
While at it, misalignment is fixed up.
Fixes: a5c10aa3d1 ("selftests/net: packetdrill: Support single protocol test.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250927213022.1850048-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here are a few sub-tests for mptcp_join.sh, validating the new 'laminar'
endpoint type.
In a setup where subflows created using the routing rules would be
rejected by the listener, and where the latter announces one IP address,
some cases are verified:
- Without any 'laminar' endpoints: no new subflows are created.
- With one 'laminar' endpoint: a second subflow is created.
- With multiple 'laminar' endpoints: 2 IPv4 subflows are created.
- With one 'laminar' endpoint, but the server announcing a second IP
address, only one subflow is created.
- With one 'laminar' + 'subflow' endpoint, the same endpoint is only
used once.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250927-net-next-mptcp-rcv-path-imp-v1-8-5da266aa9c1a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaNraNQAKCRA2KwveOeQk
u/DkAPwKPP5BSmVR2wkdpQaXIr3PGA+cbBYp34DMJNujZ9piIwD/WZ+HfGTLoERy
+2Q6HLj9hUdd+Rx3IZ8/w1QmnhUIUAU=
=AwV9
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One notable addition is the creation of the 'transitional' keyword for
kconfig so CONFIG renaming can go more smoothly.
This has been a long-standing deficiency, and with the renaming of
CONFIG_CFI_CLANG to CONFIG_CFI (since GCC will soon have KCFI
support), this came up again.
The breadth of the diffstat is mainly this renaming.
- Clean up usage of TRAILING_OVERLAP() (Gustavo A. R. Silva)
- lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
(Junjie Cao)
- Add str_assert_deassert() helper (Lad Prabhakar)
- gcc-plugins: Remove TODO_verify_il for GCC >= 16
- kconfig: Fix BrokenPipeError warnings in selftests
- kconfig: Add transitional symbol attribute for migration support
- kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI"
* tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/string_choices: Add str_assert_deassert() helper
kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI
kconfig: Add transitional symbol attribute for migration support
kconfig: Fix BrokenPipeError warnings in selftests
gcc-plugins: Remove TODO_verify_il for GCC >= 16
stddef: Introduce __TRAILING_OVERLAP()
stddef: Remove token-pasting in TRAILING_OVERLAP()
lkdtm: fortify: Fix potential NULL dereference on kmalloc failure
- Fix race with WAIT_KILLABLE_RECV (Johannes Nixdorf)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaNrY3wAKCRA2KwveOeQk
u5vmAP9pH7LAt7zTWgleIxWPYuUvELS+zB9oK9EukyTZNbAVoAD8Do5ZpFP51Llk
a6mxvmi808aYytROWM5c8O4tk5CFDQQ=
=Vkfy
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp update from Kees Cook:
- Fix race with WAIT_KILLABLE_RECV (Johannes Nixdorf)
* tag 'seccomp-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Add a test for the WAIT_KILLABLE_RECV fast reply race
seccomp: Fix a race with WAIT_KILLABLE_RECV if the tracer replies too fast
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQgQAKCRCRxhvAZXjc
oiFXAQCpbLvkWbld9wLgxUBhq+q+kw5NvGxzpvqIhXwJB9F9YAEA44/Wevln4xGx
+kRUbP+xlRQqenIYs2dLzVHzAwAdfQ4=
=EO4Y
-----END PGP SIGNATURE-----
Merge tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner:
"This contains a larger set of changes around the generic namespace
infrastructure of the kernel.
Each specific namespace type (net, cgroup, mnt, ...) embedds a struct
ns_common which carries the reference count of the namespace and so
on.
We open-coded and cargo-culted so many quirks for each namespace type
that it just wasn't scalable anymore. So given there's a bunch of new
changes coming in that area I've started cleaning all of this up.
The core change is to make it possible to correctly initialize every
namespace uniformly and derive the correct initialization settings
from the type of the namespace such as namespace operations, namespace
type and so on. This leaves the new ns_common_init() function with a
single parameter which is the specific namespace type which derives
the correct parameters statically. This also means the compiler will
yell as soon as someone does something remotely fishy.
The ns_common_init() addition also allows us to remove ns_alloc_inum()
and drops any special-casing of the initial network namespace in the
network namespace initialization code that Linus complained about.
Another part is reworking the reference counting. The reference
counting was open-coded and copy-pasted for each namespace type even
though they all followed the same rules. This also removes all open
accesses to the reference count and makes it private and only uses a
very small set of dedicated helpers to manipulate them just like we do
for e.g., files.
In addition this generalizes the mount namespace iteration
infrastructure introduced a few cycles ago. As reminder, the vfs makes
it possible to iterate sequentially and bidirectionally through all
mount namespaces on the system or all mount namespaces that the caller
holds privilege over. This allow userspace to iterate over all mounts
in all mount namespaces using the listmount() and statmount() system
call.
Each mount namespace has a unique identifier for the lifetime of the
systems that is exposed to userspace. The network namespace also has a
unique identifier working exactly the same way. This extends the
concept to all other namespace types.
The new nstree type makes it possible to lookup namespaces purely by
their identifier and to walk the namespace list sequentially and
bidirectionally for all namespace types, allowing userspace to iterate
through all namespaces. Looking up namespaces in the namespace tree
works completely locklessly.
This also means we can move the mount namespace onto the generic
infrastructure and remove a bunch of code and members from struct
mnt_namespace itself.
There's a bunch of stuff coming on top of this in the future but for
now this uses the generic namespace tree to extend a concept
introduced first for pidfs a few cycles ago. For a while now we have
supported pidfs file handles for pidfds. This has proven to be very
useful.
This extends the concept to cover namespaces as well. It is possible
to encode and decode namespace file handles using the common
name_to_handle_at() and open_by_handle_at() apis.
As with pidfs file handles, namespace file handles are exhaustive,
meaning it is not required to actually hold a reference to nsfs in
able to decode aka open_by_handle_at() a namespace file handle.
Instead the FD_NSFS_ROOT constant can be passed which will let the
kernel grab a reference to the root of nsfs internally and thus decode
the file handle.
Namespaces file descriptors can already be derived from pidfds which
means they aren't subject to overmount protection bugs. IOW, it's
irrelevant if the caller would not have access to an appropriate
/proc/<pid>/ns/ directory as they could always just derive the
namespace based on a pidfd already.
It has the same advantage as pidfds. It's possible to reliably and for
the lifetime of the system refer to a namespace without pinning any
resources and to compare them trivially.
Permission checking is kept simple. If the caller is located in the
namespace the file handle refers to they are able to open it otherwise
they must hold privilege over the owning namespace of the relevant
namespace.
The namespace file handle layout is exposed as uapi and has a stable
and extensible format. For now it simply contains the namespace
identifier, the namespace type, and the inode number. The stable
format means that userspace may construct its own namespace file
handles without going through name_to_handle_at() as they are already
allowed for pidfs and cgroup file handles"
* tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (65 commits)
ns: drop assert
ns: move ns type into struct ns_common
nstree: make struct ns_tree private
ns: add ns_debug()
ns: simplify ns_common_init() further
cgroup: add missing ns_common include
ns: use inode initializer for initial namespaces
selftests/namespaces: verify initial namespace inode numbers
ns: rename to __ns_ref
nsfs: port to ns_ref_*() helpers
net: port to ns_ref_*() helpers
uts: port to ns_ref_*() helpers
ipv4: use check_net()
net: use check_net()
net-sysfs: use check_net()
user: port to ns_ref_*() helpers
time: port to ns_ref_*() helpers
pid: port to ns_ref_*() helpers
ipc: port to ns_ref_*() helpers
cgroup: port to ns_ref_*() helpers
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQOwAKCRCRxhvAZXjc
oth/AQDvlOo+23/f2djgDGS8akjkBYVLW14OYzC0q5cbEnnGgAEAycHL50pp3n1o
3jMYlCByuv507vpCsDupo7QcJapmQAk=
=/NwE
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains some work around mount api handling:
- Output the warning message for mnt_too_revealing() triggered during
fsmount() to the fscontext log. This makes it possible for the
mount tool to output appropriate warnings on the command line.
For example, with the newest fsopen()-based mount(8) from
util-linux, the error messages now look like:
# mount -t proc proc /tmp
mount: /tmp: fsmount() failed: VFS: Mount too revealing.
dmesg(1) may have more information after failed mount system call.
- Do not consume fscontext log entries when returning -EMSGSIZE
Userspace generally expects APIs that return -EMSGSIZE to allow for
them to adjust their buffer size and retry the operation.
However, the fscontext log would previously clear the message even
in the -EMSGSIZE case.
Given that it is very cheap for us to check whether the buffer is
too small before we remove the message from the ring buffer, let's
just do that instead.
- Drop an unused argument from do_remount()"
* tag 'vfs-6.18-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: fs/namespace.c: remove ms_flags argument from do_remount
selftests/filesystems: add basic fscontext log tests
fscontext: do not consume log entries when returning -EMSGSIZE
vfs: output mount_too_revealing() errors to fscontext
docs/vfs: Remove mentions to the old mount API helpers
fscontext: add custom-prefix log helpers
fs: Remove mount_bdev
fs: Remove mount_nodev
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQMQAKCRCRxhvAZXjc
omNLAQCgrwzd9sa1JTlixweu3OAxQlSEbLuMpEv7Ztm+B7Wz0AD9HtwPC44Kev03
GbMcB2DCFLC4evqYECj6IG7NBmoKsAs=
=1ICf
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
Merge ACPICA updates (20250807 release material with a few fixes on top)
for 6.18-rc1:
- Add SoundWire File Table (SWFT) signature to ACPICA (Maciej Strozek)
- Rearrange local variable definition involving #ifdef in ACPICA to
avoid using uninitialized variables (Zhe Qiao)
- Allow ACPICA to skip Global Lock initialization (Huacai Chen)
- Apply ACPI_NONSTRING in more places in ACPICA and fix two regressions
related to incorrect ACPI_NONSTRING usage (Ahmed Salem)
- Fix printing CDAT table header when dissasebling CDAT AML (Ahmed
Salem)
- Use acpi_ds_clear_operands() in acpi_ds_call_control_method() in
ACPICA (Hans de Goede)
- Update dsmethod.c in ACPICA to address unused variable warning (Saket
Dumbre)
- Print error messages in ACPICA for too few or too many control method
arguments (Saket Dumbre)
- Update ACPICA version to 20250807 (Saket Dumbre)
- Fix largest possible resource descriptor index in ACPICA (Dmitry
Antipov)
- Add Back-Invalidate restriction to CXL Window for CEDT in ACPICA
(Davidlohr Bueso).
- Add the package type to acceptable Arg3 types for _DSM in ACPICA
because ACPI_TYPE_ANY does not cover it (Saket Dumbre)
- Fix return values in ap_is_valid_checksum() in the acpidump utility
in ACPICA (Kaushlendra Kumar)
* acpica:
ACPICA: acpidump: fix return values in ap_is_valid_checksum()
ACPICA: ACPI_TYPE_ANY does not include the package type
ACPICA: CEDT: Add Back-Invalidate restriction to CXL Window
ACPICA: Fix largest possible resource descriptor index
ACPICA: Update version to 20250807
ACPICA: Print error messages for too few or too many arguments
ACPICA: Update dsmethod.c to get rid of unused variable warning
ACPICA: dispatcher: Use acpi_ds_clear_operands() in acpi_ds_call_control_method()
ACPICA: Debugger: drop ACPI_NONSTRING attribute from name_seg
ACPICA: acpidump: drop ACPI_NONSTRING attribute from file_name
ACPICA: iASL: Fix printing CDAT table header
ACPICA: Apply ACPI_NONSTRING
ACPICA: Allow to skip Global Lock initialization
ACPICA: Change the compilation conditions
ACPICA: Remove redundant "#ifdef" definitions
ACPICA: Modify variable definition position
ACPICA: Add SoundWire File Table (SWFT) signature
Merge power management utilities updates for 6.18-rc1:
- Fix and clean up the x86_energy_perf_policy utility and update its
documentation (Len Brown, Kaushlendra Kumar)
- Fix incorrect sorting of PMT telemetry in turbostat (Kaushlendra
Kumar)
- Fix incorrect size in cpuidle_state_disable() and the error return
value of cpupower_write_sysfs() in cpupower (Kaushlendra Kumar)
* pm-tools:
tools/power x86_energy_perf_policy.8: Emphasize preference for SW interfaces
tools/power x86_energy_perf_policy: Add make snapshot target
tools/power x86_energy_perf_policy: Prefer driver HWP limits
tools/power x86_energy_perf_policy: EPB access is only via sysfs
tools/power x86_energy_perf_policy: Prepare for MSR/sysfs refactoring
tools/power x86_energy_perf_policy: Enhance HWP enable
tools/power x86_energy_perf_policy: Enhance HWP enabled check
tools/power x86_energy_perf_policy: Fix incorrect fopen mode usage
tools/power turbostat: Fix incorrect sorting of PMT telemetry
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/cpupower: fix error return value in cpupower_write_sysfs()
Fixes incorrect return vale in cpupower_write_sysfs() error path
and passing incorrect size to cpuidle_state_write_file() while
writing status to disable file in cpuidle_state_disable().
-----BEGIN PGP SIGNATURE-----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=1VZt
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge cpupower utility updates for 6.18-rc1 from Shuah Khan:
"Fixes incorrect return vale in cpupower_write_sysfs() error path
and passing incorrect size to cpuidle_state_write_file() while
writing status to disable file in cpuidle_state_disable()."
* tag 'linux-cpupower-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: (1125 commits)
tools/cpupower: Fix incorrect size in cpuidle_state_disable()
tools/cpupower: fix error return value in cpupower_write_sysfs()
Linux 6.17-rc6
MAINTAINERS: Input: Drop melfas-mip4 section
USB: core: remove the move buf action
MAINTAINERS: Update the DMA Rust entry
erofs: fix long xattr name prefix placement
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
selftests/bpf: Skip timer cases when bpf_timer is not supported
bpf: Reject bpf_timer for PREEMPT_RT
libceph: fix invalid accesses to ceph_connection_v1_info
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
...
The fast path through a write will require replacing a single node in
the tree. Using a sheaf (32 nodes) is too heavy for the fast path, so
special case the node store operation by just allocating one node in the
maple state.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Use prefilled sheaves instead of bulk allocations. This should speed up
the allocations and the return path of unused allocations.
Remove the push and pop of nodes from the maple state as this is now
handled by the slab layer with sheaves.
Testing has been removed as necessary since the features of the tree
have been reduced.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add the prefilled sheaf structs to the slab header and the associated
functions to the testing/shared/linux.c file.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
liburcu doesn't have kfree_rcu (or anything similar). Despite that, we
can hack around it in a trivial fashion, by adding a wrapper.
The wrapper only works for maple_nodes because we cannot get the
kmem_cache pointer any other way in the test code.
Link: https://lore.kernel.org/all/20250812162124.59417-1-pfalcato@suse.de/
Suggested-by: Pedro Falcato <pfalcato@suse.de>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
There's some duplicated code and we are about to add more functionality
in maple-shared.h that we will need in the userspace maple test to be
available, so include it via maple-shim.c
Co-developed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
The slab changes for sheaves requires more effort in the testing code.
Unite all the kmem_cache work into the tools/include slab header for
both the vma and maple tree testing.
The vma test code also requires importing more #defines to allow for
seamless use of the shared kmem_cache code.
This adds the pthread header to the slab header in the tools directory
to allow for the pthread_mutex in linux.c.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add the reset of the ref count in vma_lock_init(). This is needed if
the vma memory is not zeroed on allocation.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Bulk insert mode was added to facilitate forking faster, but forking now
uses __mt_dup() to duplicate the tree.
The addition of sheaves has made the bulk allocations difficult to
maintain - since the expected entries would preallocate into the maple
state. A big part of the maple state node allocation was the ability to
push nodes back onto the state for later use, which was essential to the
bulk insert algorithm.
Remove mas_expected_entries() and mas_destroy_rebalance() functions as
well as the MA_STATE_BULK and MA_STATE_REBALANCE maple state flags since
there are no users anymore. Drop the associated testing as well.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
We do not need to references arguments just to avoid compiler warnings,
the warning in question does not arise here, so remove all of the
instances of '(void)xxx' introduced purely to avoid this warning.
As reported by WagYuli in the referenced mail, GCC 8.3 and before will
have issues compiling this file if parameter names are not provided, so
ensure these are always provided.
Finally, perform a trivial fix up of kmem_cache_alloc() which technically
has parameters in the incorrect order (as reported by Vlastimil Babka
off-list).
Link: https://lkml.kernel.org/r/20250826102824.22730-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: WangYuli <wangyuli@uniontech.com>
Closes: https://lore.kernel.org/linux-mm/EFCEBE7E301589DE+20250729084700.208767-1-wangyuli@uniontech.com/
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Add a new selftest to verify whether the `ksm_merging_pages` counter in
`mm_struct` is not inherited by a child process after fork. This helps
ensure correctness of KSM accounting across process creation.
Link: https://lkml.kernel.org/r/e7bb17d374133bd31a3e423aa9e46e1122e74971.1758648700.git.donettom@linux.ibm.com
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aboorva Devarajan <aboorvad@linux.ibm.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some more updates for v6.18, mostly fixes for the earlier pull request
with some cleanups and more minor fixes for older code. We do have one
new driver, the TI TAS2783A, and some quirks for new platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjZIZAACgkQJNaLcl1U
h9DZqgf+L+U/ysqynLO6NncBatsP3QHBxL8Op8DhOUG8cmtKwUHgeNJPaNDPA/rF
b6WLe6yZBXpBLyDtWo/eHwxC3pdOPJ7JcFWhpZcYMBKfxwszzki72OiZerxkwuUS
mFVr0EFkB/cbqkw9D8AF5tOMlauSDNjJQUiuNDOKD7BYvFNtuY3wOYvIA/kaW86l
SlAb3dD4pOhYP8mgPP8v8h83LyHr3NnIEX4uVSQTxZ98zZmL08FB2sCv4bzqZuag
pI6cDF1qlOT5y1CKLXIZ1JoflrUiEYyB9X1eb/rW2+8/USGzC4enr2cEm4phU3te
X4MV3N3BulSq03xewX0Jw19mdQE0Hg==
=91Ur
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18 round 2
Some more updates for v6.18, mostly fixes for the earlier pull request
with some cleanups and more minor fixes for older code. We do have one
new driver, the TI TAS2783A, and some quirks for new platforms.
Reimplement libbpf_sha256() using some basic SHA-256 C code. This
eliminates the newly-added dependency on AF_ALG, which is a problematic
UAPI that is not supported by all kernels.
Make libbpf_sha256() return void, since it can no longer fail. This
simplifies some callers. Also drop the unnecessary 'sha_out_sz'
parameter. Finally, also fix the typo in "compute_sha_udpate_offsets".
Fixes: c297fe3e9f ("libbpf: Implement SHA256 internal helper")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/r/20250928003833.138407-1-ebiggers@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a kernel module that will exercise lock acquisition in the NMI
path, and bias toward creating contention such that NMI waiters end up
being non-head waiters. Prior to the rqspinlock fix made in the commit
0d80e7f951 ("rqspinlock: Choose trylock fallback for NMI waiters"), it
was possible for the queueing path of non-head waiters to get stuck in
NMI, which this stress test reproduces fairly easily with just 3 CPUs.
Both AA and ABBA flavors are supported, and it will serve as a test case
for future fixes that address this corner case. More information about
the problem in question is available in the commit cited above. When the
fix is reverted, this stress test will lock up the system.
To enable this test automatically through the test_progs infrastructure,
add a load_module_params API to exercise both AA and ABBA cases when
running the test.
Note that the test runs for at most 5 seconds, and becomes a noop after
that, in order to allow the system to make forward progress. In
addition, CPU 0 is always kept untouched by the created threads and
NMIs. The test will automatically scale to the number of available
online CPUs.
Note that at least 3 CPUs are necessary to run this test, hence skip the
selftest in case the environment has less than 3 CPUs available.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250927205304.199760-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix a buffer overflow in actions_parse()
The "trigger_c" variable did not account for the nul byte when
determining its size.
- Fix a compare that had the values reversed
actions_destroy() is to reallocate when len is greater than the current size,
but the compare was testing if size is greater than the new length.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaNfbFhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmozAPwKEWRb1gbDIeeva7r6HVRc1jKO3EfK
qT72fgqfKlwUawD/fM3mlW1+n25ZHMX+1e8eQV1CP5VOldgdQEHFzDEz0gI=
=i8D5
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rtla tool fixes from Steven Rostedt:
- Fix a buffer overflow in actions_parse()
The "trigger_c" variable did not account for the nul byte when
determining its size
- Fix a compare that had the values reversed
actions_destroy() is supposed to reallocate when len is greater than
the current size, but the compare was testing if size is greater than
the new length
* tag 'trace-tools-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/actions: Fix condition for buffer reallocation
rtla: Fix buffer overflow in actions_parse
Add a small test case which adds two programs - one calling the other
through a tailcall - and check that BPF rejects them in case of different
expected_attach_type values:
# ./vmtest.sh -- ./test_progs -t xdp_devmap
[...]
#641/1 xdp_devmap_attach/DEVMAP with programs in entries:OK
#641/2 xdp_devmap_attach/DEVMAP with frags programs in entries:OK
#641/3 xdp_devmap_attach/Verifier check of DEVMAP programs:OK
#641/4 xdp_devmap_attach/DEVMAP with programs in entries on veth:OK
#641 xdp_devmap_attach:OK
Summary: 2/4 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250926171201.188490-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The condition to check if the actions buffer needs to be resized was
incorrect. The check `self->size >= self->len` would evaluate to
true on almost every call to `actions_new()`, causing the buffer to
be reallocated unnecessarily each time an action was added.
Fix the condition to `self->len >= self.size`, ensuring
that the buffer is only resized when it is actually full.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250915181101.52513-1-wander@redhat.com
Fixes: 6ea082b171 ("rtla/timerlat: Add action on threshold feature")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The basic functionality came with the consolidation; now hook up the
command line options, and add documentation and tests.
Cc: John Kacur <jkacur@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/20250907022325.243930-8-crwood@redhat.com
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a check() parameter to indicate which text must not appear in the
output.
Simplify the code so that we can print failures as they happen rather
than trying to figure out what went wrong after printing "not ok". This
also means that "not ok" gets printed after the info rather than before,
which seems more intuitive anyway.
Cc: John Kacur <jkacur@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/20250907022325.243930-7-crwood@redhat.com
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This was changed to --on-threshold when the patches were applied.
Cc: John Kacur <jkacur@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/20250907022325.243930-6-crwood@redhat.com
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently a lot of code is duplicated between the different rtla tools,
making maintenance more difficult, and encouraging divergence such as
features that are only implemented for certain tools even though they
could be more broadly applicable.
Merge the various main() functions into a common run_tool() with an ops
struct for tool-specific details.
Implement enough support for actions on osnoise to not need to keep the
old params->trace_output path.
Cc: John Kacur <jkacur@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/20250907022325.243930-5-crwood@redhat.com
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge the common bits of osnoise_apply_config() and
timerlat_apply_config(). Put the result in a new common.c, and move
enough things to common.h so that common.c does not need to include
osnoise.h.
Cc: John Kacur <jkacur@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/20250907022325.243930-4-crwood@redhat.com
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The hist members were very similar between timerlat and top, so
just use one common hist struct.
output_divisor, quiet, and pretty printing are pretty generic
concepts that can go in the main struct even if not every
specific tool (currently) uses them.
Cc: John Kacur <jkacur@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/20250907022325.243930-3-crwood@redhat.com
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
timerlat_params and osnoise_params structures contain 15 identical
fields.
Introduce a new header common.h and define a common_params structure to
consolidate shared fields, reduce code duplication, and enhance
maintainability.
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250907022325.243930-2-crwood@redhat.com
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Most forwarding tests invoke forwarding_enable() to enable the router and
forwarding_restore() to restore the original configuration. Add a helper,
adf_forwarding_enable(), which is like forwarding_enable(), but takes care
of scheduling the cleanup automatically.
Convert the tests that currently use defer to schedule the cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/78b752c40069cde21c44dcf4c7b966a76a0eef2c.1758821127.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most forwarding tests invoke simple_if_init() to set up a VRF-based "host"
and simple_if_fini() to tear it down again. Add a helper,
adf_simple_if_init(), which is like simple_if_fini(), but takes care of
scheduling the cleanup automatically.
Convert the tests that currently use defer to schedule the cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/6b9ee1a7946a36fd32a47fdb1aa9325198ffc695.1758821127.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most forwarding tests invoke vrf_prepare() to set up VRF forwarding and
vrf_cleanup() to restore the original configuration. Add a helper,
adf_vrf_prepare(), which is like vrf_prepare(), but takes care of
scheduling the cleanup automatically.
Convert a number of tests that currently use defer to schedule the cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2f2000e54ae700d560a8d6128322dade3bd2207e.1758821127.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the Path-Managers are confusing, and it would
help current and future developers, to clarify them.
One of them is 'subflows', which in fact represents the number of extra
subflows: all the additional subflows created after the initial one, and
not the total number of subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_extra_subflows. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-5-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous commit adds an exception for the C-flag case. The
'mptcp_join.sh' selftest is extended to validate this case.
In this subtest, there is a typical CDN deployment with a client where
MPTCP endpoints have been 'automatically' configured:
- the server set net.mptcp.allow_join_initial_addr_port=0
- the client has multiple 'subflow' endpoints, and the default limits:
not accepting ADD_ADDRs.
Without the parent patch, the client is not able to establish new
subflows using its 'subflow' endpoints. The parent commit fixes that.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-2-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simple tests to validate kernel's output. FEC bin range should be valid
means high boundary should be not less than low boundary. Bin boundaries
have to be provided as well as error counter value. Per-plane value
should match bin's value.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20250924124037.1508846-6-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to avoid cases where the `res` shell variable is
empty in script comparisons.
The comparison has been modified into string comparison to
handle other possible values the variable could assume.
The issue can be reproduced with the command:
make kselftest TARGETS=net
It solves the error:
./tfo_passive.sh: line 98: [: -eq: unary operator expected
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250925132832.9828-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a verification failure. filter_udphdr() calls bpf_xdp_pull_data(),
which will invalidate all pkt pointers. Therefore, all ctx->data loaded
before filter_udphdr() cannot be used. Reload it to prevent verification
errors.
The error may not appear on some compiler versions if they decide to
load ctx->data after filter_udphdr() when it is first used.
Fixes: efec2e55bd ("selftests: drv-net: Pull data before parsing headers")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250925161452.1290694-1-ameryhung@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a module registers a struct_ops, the struct_ops type and its
corresponding map_value type ("bpf_struct_ops_") may reside in different
btf objects, here are four possible case:
+--------+---------------+-------------+---------------------------------+
| |bpf_struct_ops_| xxx_ops | |
+--------+---------------+-------------+---------------------------------+
| case 0 | btf_vmlinux | btf_vmlinux | be used and reg only in vmlinux |
+--------+---------------+-------------+---------------------------------+
| case 1 | btf_vmlinux | mod_btf | INVALID |
+--------+---------------+-------------+---------------------------------+
| case 2 | mod_btf | btf_vmlinux | reg in mod but be used both in |
| | | | vmlinux and mod. |
+--------+---------------+-------------+---------------------------------+
| case 3 | mod_btf | mod_btf | be used and reg only in mod |
+--------+---------------+-------------+---------------------------------+
Currently we figure out the mod_btf by searching with the struct_ops type,
which makes it impossible to figure out the mod_btf when the struct_ops
type is in btf_vmlinux while it's corresponding map_value type is in
mod_btf (case 2).
The fix is to use the corresponding map_value type ("bpf_struct_ops_")
as the lookup anchor instead of the struct_ops type to figure out the
`btf` and `mod_btf` via find_ksym_btf_id(), and then we can locate
the kern_type_id via btf__find_by_name_kind() with the `btf` we just
obtained from find_ksym_btf_id().
With this change the lookup obtains the correct btf and mod_btf for case 2,
preserves correct behavior for other valid cases, and still fails as
expected for the invalid scenario (case 1).
Fixes: 590a008882 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20250926071751.108293-1-alibuda@linux.alibaba.com
bpf_xdp_pull_data() is the first kfunc that changes packet data. Make
sure the verifier clear all packet pointers after calling packet data
changing kfunc.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250926164142.1850176-1-ameryhung@gmail.com
Fix to avoid the usage of the `res` variable uninitialized in the
following macro expansions.
It solves the following warning:
In function ‘iommufd_viommu_vdevice_alloc’,
inlined from ‘wrapper_iommufd_viommu_vdevice_alloc’ at iommufd.c:2889:1:
../kselftest_harness.h:760:12: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
760 | if (!(__exp _t __seen)) { \
| ^
../kselftest_harness.h:513:9: note: in expansion of macro ‘__EXPECT’
513 | __EXPECT(expected, #expected, seen, #seen, ==, 1)
| ^~~~~~~~
iommufd_utils.h:1057:9: note: in expansion of macro ‘ASSERT_EQ’
1057 | ASSERT_EQ(0, _test_cmd_trigger_vevents(self->fd, dev_id, nvevents))
| ^~~~~~~~~
iommufd.c:2924:17: note: in expansion of macro ‘test_cmd_trigger_vevents’
2924 | test_cmd_trigger_vevents(dev_id, 3);
| ^~~~~~~~~~~~~~~~~~~~~~~~
The issue can be reproduced, building the tests, with the command: make -C
tools/testing/selftests TARGETS=iommu
Link: https://patch.msgid.link/r/20250924171629.50266-1-alessandro.zanni87@gmail.com
Fixes: 97717a1f28 ("iommufd/selftest: Add IOMMU_VEVENTQ_ALLOC test coverage")
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This tool was originally written when Linux had no standard
interface for EPB, or HWP support.
Retain the capability to manage a system w/o any kernel PM support,
but prefer the standard kernel interfaces, when avaialble.
(not doing so led to a confusing conflict between a p-state limit
request made via cpufreq and modified by the intel-pstate driver,
versus the raw MSR write made by this utility)
Signed-off-by: Len Brown <len.brown@intel.com>
$ make snapshot
creates x86_energy_perf_policy-$(DATE).tar.gz
Which can be transported to a target machine
without needing a kernel tree to build on the target.
Useful for creating debug versions.
Signed-off-by: Len Brown <len.brown@intel.com>
When we are successful in using cpufreq min/max limits,
skip setting the raw MSR limits entirely.
This is necessary to avoid undoing any modification that
the cpufreq driver makes to our sysfs request.
eg. intel_pstate may take our request for a limit
that is valid according to HWP.CAP.MIN/MAX and clip
it to be within the range available in PLATFORM_INFO.
Signed-off-by: Len Brown <len.brown@intel.com>
Comprehend that EPB writes are now only via sysfs
by moving it out of the _msr specific path.
No functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
On enabling HWP, preserve the reserved bits in MSR_PM_ENABLE.
Also, skip writing the MSR_PM_ENABLE if HWP is already enabled.
Signed-off-by: Len Brown <len.brown@intel.com>
The fopen_or_die() function was previously hardcoded
to open files in read-only mode ("r"), ignoring the
mode parameter passed to it. This patch corrects
fopen_or_die() to use the provided mode argument,
allowing for flexible file access as intended.
Additionally, the call to fopen_or_die() in
err_on_hypervisor() incorrectly used the mode
"ro", which is not a valid fopen mode. This is
fixed to use the correct "r" mode.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The pmt_telemdir_sort() comparison function was returning a boolean
value (0 or 1) instead of the required negative, zero, or positive
value for proper sorting. This caused unpredictable and incorrect
ordering of telemetry directories named telem0, telem1, ..., telemN.
Update the comparison logic to return -1, 0, or 1 based on the
numerical value extracted from the directory name, ensuring correct
numerical ordering when using scandir.
This change improves stability and correctness when iterating PMT
telemetry directories.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add tests for stacktrace map lookup and delete:
1. use bpf_map_lookup_and_delete_elem to lookup and delete the target
stack_id,
2. lookup the deleted stack_id again to double check.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925175030.1615837-3-chen.dylane@linux.dev
The loading method of the stacktrace_map test case looks too outdated,
refactor it with skeleton, and we can use global variable feature in
the next patch.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925175030.1615837-2-chen.dylane@linux.dev
bpf_cookie can fail on perf_event_open(), when it runs after the task_work
selftest. The task_work test causes perf to lower
sysctl_perf_event_sample_rate, and bpf_cookie uses sample_freq,
which is validated against that sysctl. As a result,
perf_event_open() rejects the attr if the (now tighter) limit is
exceeded.
>From perf_event_open():
if (attr.freq) {
if (attr.sample_freq > sysctl_perf_event_sample_rate)
return -EINVAL;
} else {
if (attr.sample_period & (1ULL << 63))
return -EINVAL;
}
Switch bpf_cookie to use sample_period, which is not checked against
sysctl_perf_event_sample_rate.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925215230.265501-1-mykyta.yatsenko5@gmail.com
The verifier should invalidate all packet pointers after a packet data
changing kfunc is called. So, similar to commit 3f23ee5590
("selftests/bpf: test for changing packet data from global functions"),
test changing packet data from global functions to make sure packet
pointers are indeed invalidated.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250925170013.1752561-2-ameryhung@gmail.com
Add a .gitignore for the test case build object.
Signed-off-by: Dylan Yudaken <dyudaken@gmail.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
task_work selftest does not properly handle cleanup during failures:
* destroy bpf_link
* perf event fd is passed to bpf_link, no need to close it if link was
created successfully
* goto cleanup if fork() failed, close pipe.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250924142954.129519-2-mykyta.yatsenko5@gmail.com
devm_kcalloc() may fail. ndtest_probe() allocates three DMA address
arrays (dcr_dma, label_dma, dimm_dma) and later unconditionally uses
them in ndtest_nvdimm_init(), which can lead to a NULL pointer
dereference under low-memory conditions.
Check all three allocations and return -ENOMEM if any allocation fails,
jumping to the common error path. Do not emit an extra error message
since the allocator already warns on allocation failure.
Fixes: 9399ab61ad ("ndtest: Add dimms to the two buses")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Otherwise tests compiled with only "-include nolibc.h" will fail with
"error: unknown type name 'bool'", even though a stdbool.h is available
from nolibc.
Fixes: ae1f550efc ("tools/nolibc: add stdbool.h header")
Fixes: f2662ec26b ("selftests: kselftest: Create ksft_print_dbg_msg()")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/833f5ae5-190e-47ec-9ad9-127ad166c80c@sirena.org.uk/
Signed-off-by: André Almeida <andrealmeid@igalia.com>
[Thomas: add Fixes tags and massage commit message a bit]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
No known regressions at this point.
Current release - regressions:
- xfrm: xfrm_alloc_spi shouldn't use 0 as SPI
Previous releases - regressions:
- xfrm: fix offloading of cross-family tunnels
- bluetooth: fix several races leading to UaFs
- dsa: lantiq_gswip: fix FDB entries creation for the CPU port
- eth: tun: update napi->skb after XDP process
- eth: mlx: fix UAF in flow counter release
Previous releases - always broken:
- core: forbid FDB status change while nexthop is in a group
- smc: fix warning in smc_rx_splice() when calling get_page()
- can: provide missing ndo_change_mtu(), to prevent buffer overflow.
- eth: i40e: fix VF config validation
- eth: broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=M0Pd
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth, IPsec and CAN.
No known regressions at this point.
Current release - regressions:
- xfrm: xfrm_alloc_spi shouldn't use 0 as SPI
Previous releases - regressions:
- xfrm: fix offloading of cross-family tunnels
- bluetooth: fix several races leading to UaFs
- dsa: lantiq_gswip: fix FDB entries creation for the CPU port
- eth:
- tun: update napi->skb after XDP process
- mlx: fix UAF in flow counter release
Previous releases - always broken:
- core: forbid FDB status change while nexthop is in a group
- smc: fix warning in smc_rx_splice() when calling get_page()
- can: provide missing ndo_change_mtu(), to prevent buffer overflow.
- eth:
- i40e: fix VF config validation
- broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl"
* tag 'net-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()
net: dsa: lantiq_gswip: suppress -EINVAL errors for bridge FDB entries added to the CPU port
net: dsa: lantiq_gswip: move gswip_add_single_port_br() call to port_setup()
libie: fix string names for AQ error codes
net/mlx5e: Fix missing FEC RS stats for RS_544_514_INTERLEAVED_QUAD
net/mlx5: HWS, ignore flow level for multi-dest table
net/mlx5: fs, fix UAF in flow counter release
selftests: fib_nexthops: Add test cases for FDB status change
selftests: fib_nexthops: Fix creation of non-FDB nexthops
nexthop: Forbid FDB status change while nexthop is in a group
net: allow alloc_skb_with_frags() to use MAX_SKB_FRAGS
bnxt_en: correct offset handling for IPv6 destination address
ptp: document behavior of PTP_STRICT_FLAGS
broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl
broadcom: fix support for PTP_PEROUT_DUTY_CYCLE
Bluetooth: MGMT: Fix possible UAFs
Bluetooth: hci_event: Fix UAF in hci_acl_create_conn_sync
Bluetooth: hci_event: Fix UAF in hci_conn_tx_dequeue
Bluetooth: hci_sync: Fix hci_resume_advertising_sync
Bluetooth: Fix build after header cleanup
...
Add IPIP test-cases to the GRO selftest.
This selftest already contains IP ID test-cases. They are now
also tested for encapsulated packets.
This commit also fixes ipip packet generation in the test.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-6-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, packets with fixed IDs will be merged only if their
don't-fragment bit is set. This restriction is unnecessary since
packets without the don't-fragment bit will be forwarded as-is even
if they were merged together. The merged packets will be segmented
into their original forms before being forwarded, either by GSO or
by TSO. The IDs will also remain identical unless NETIF_F_TSO_MANGLEID
is set, in which case the IDs can become incrementing, which is also fine.
Clean up the code by removing the unnecessary don't-fragment checks.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250923085908.4687-5-richardbgobert@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add simple tests to validate that the driver sets up timestamping
configuration according to what is reported in capabilities.
For RX timestamping we allow driver to fallback to wider scope for
timestamping if filter is applied. That actually means that driver
can enable ptpv2-event when it reports ptpv2-l4-event is supported,
but not vice versa.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250923173310.139623-5-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=uK7h
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-09-24' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: fixes for net-next
These fixes target next because the bug is either not severe or has
existed for so long that there is no reason to cram them in at the last
minute.
1) Fix IPVS ftp unregistering during netns cleanup, broken since netns
support was introduced in 2011 in the 2.6.39 kernel.
From Slavin Liu.
2) nfnetlink must reset the 'nlh' pointer back to the original
address when a batch is replayed, else we emit bogus ACK messages
and conceal real errno from userspace.
From Fernando Fernandez Mancera. This was broken since 6.10.
3) Recent fix for nftables 'pipapo' set type was incomplete, it only
made things work for the AVX2 version of the algorithm.
4) Testing revealed another problem with avx2 version that results in
out-of-bounds read access, this bug always existed since feature was
added in 5.7 kernel. This also comes with a selftest update.
Last fix resolves a long-standing bug (since 4.9) in conntrack /proc
interface:
Decrease skip count when we reap an expired entry during dump.
As-is we erronously elide one conntrack entry from dump for every expired
entry seen. From Eric Dumazet.
* tag 'nf-next-25-09-24' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_conntrack: do not skip entries in /proc/net/nf_conntrack
selftests: netfilter: nft_concat_range.sh: add check for double-create bug
netfilter: nft_set_pipapo_avx2: fix skip of expired entries
netfilter: nft_set_pipapo: use 0 genmask for packetpath lookups
netfilter: nfnetlink: reset nlh pointer during batch replay
ipvs: Defer ip_vs_ftp unregister during netns cleanup
====================
Link: https://patch.msgid.link/20250924140654.10210-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix incorrect size parameter passed to cpuidle_state_write_file() in
cpuidle_state_disable().
The function was incorrectly using sizeof(disable) which returns the
size of the unsigned int variable (4 bytes) instead of the actual
length of the string stored in the 'value' buffer.
Since 'value' is populated with snprintf() to contain the string
representation of the disable value, we should use the length
returned by snprintf() to get the correct string length for
writing to the sysfs file.
This ensures the correct number of bytes is written to the cpuidle
state disable file in sysfs.
Link: https://lore.kernel.org/r/20250917050820.1785377-1-kaushlendra.kumar@intel.com
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kernel's CFI implementation uses the KCFI ABI specifically, and is
not strictly tied to a particular compiler. In preparation for GCC
supporting KCFI, rename CONFIG_CFI_CLANG to CONFIG_CFI (along with
associated options).
Use new "transitional" Kconfig option for old CONFIG_CFI_CLANG that will
enable CONFIG_CFI during olddefconfig.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250923213422.1105654-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
* kvm-arm64/selftests-6.18:
: .
: KVM/arm64 selftest updates for 6.18:
:
: - Large update to run EL1 selftests at EL2 when possible
: (20250917212044.294760-1-oliver.upton@linux.dev)
:
: - Work around lack of ID_AA64MMFR4_EL1 trapping on CPUs
: without FEAT_FGT
: (20250923173006.467455-1-oliver.upton@linux.dev)
:
: - Additional fixes and cleanups
: (20250920-kvm-arm64-id-aa64isar3-el1-v1-0-1764c1c1c96d@kernel.org)
: .
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
Signed-off-by: Marc Zyngier <maz@kernel.org>
We have a couple of writable bitfields in ID_AA64ISAR3_EL1 but the
set_id_regs selftest does not cover this register at all, add coverage.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently we list the main set of registers with bits we test three
times, once in the test_regs array which is used at runtime, once in the
guest code and once in a list of ARRAY_SIZE() operations we use to tell
kselftest how many tests we plan to execute. This is needlessly fiddly,
when adding new registers as the test_cnt calculation is formatted with
two registers per line. Instead count the number of bitfields in the
register arrays at runtime.
The existing code subtracts ARRAY_SIZE(test_regs) from the number of
tests to account for the terminating FTR_REG_END entries in the per
register arrays, the new code accounts for this when enumerating.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Implementations without FEAT_FGT aren't required to trap the entire ID
register space when HCR_EL2.TID3 is set. This is a terrible idea, as the
hypervisor may need to advertise the absence of a feature to the VM
using a negative value in a signed field, FEAT_E2H0 being a great
example of this.
Cope with uncooperative implementations in the EL2 selftest by accepting
a zero value when FEAT_FGT is absent and otherwise only tolerating the
expected nonzero value.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add an embarrassingly simple selftest for sanity checking KVM's VHE EL2
and test that the ID register bits are consistent with HCR_EL2.E2H being
RES1.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Take advantage of VHE to implicitly promote KVM selftests to run at EL2
with only slight modification. Update the smccc_filter test to account
for this now that the EL2-ness of a VM is visible to tests.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Initialize HCR_EL2 such that EL2&0 is considered 'InHost', allowing the
use of (mostly) unmodified EL1 selftests at EL2.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Configuring the number of implemented counters via PMCR_EL0.N was a bad
idea in retrospect as it interacts poorly with nested. Migrate the
selftest to use the vCPU attribute instead of the KVM_SET_ONE_REG
mechanism.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Arch timer registers are redirected to their hypervisor counterparts
when running in VHE EL2. This is great, except for the fact that the
hypervisor timers use different PPIs. Use the correct INTIDs when that
is the case.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
HVCs are taken within the VM when EL2 is in use. Ensure tests use the
SMC instruction when running at EL2 to interact with the host.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The default vCPU target in KVM selftests is pretty boring in that it
doesn't enable any vCPU features. Expose a helper for getting the
default target to prepare for cramming in more features. Call
KVM_ARM_PREFERRED_TARGET directly from get-reg-list as it needs
fine-grained control over feature flags.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
FEAT_VHE has the somewhat nice property of implicitly redirecting EL1
register aliases to their corresponding EL2 representations when E2H=1.
Unfortunately, there's no such abstraction for userspace and EL2
registers are always accessed by their canonical encoding.
Introduce a helper that applies EL2 redirections to sysregs and use
aggressive inlining to catch misuse at compile time. Go a little past
the architectural definition for ease of use for test authors (e.g. the
stack pointer).
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Start creating a VGICv3 by default unless explicitly opted-out by the
test. While having an interrupt controller is nice, the real benefit
here is clearing a hurdle for EL2 VMs which mandate the presence of a
VGIC.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
vgic_v3_setup() has a good bit of sanity checking internally to ensure
that vCPUs have actually been created and match the dimensioning of the
vgic itself. Spin off an unsanitised setup and initialization helper so
vgic initialization can be wired in around a 'default' VM's vCPU
creation.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Introduce a proper predicate for probing VGICv3 by performing a 'test'
creation of the device on a dummy VM.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
vgic_v3_setup() unnecessarily initializes the vgic twice. Keep the
initialization after configuring MMIO frames and get rid of the other.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to compel the default usage of EL2 in selftests, move
kvm_arch_vm_post_create() to library code and expose an opt-in for using
MTE by default.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaNNwBQAKCRAraS+Z+3y5
E8heAQDdJTR9rwAL7gD79cldlHP5PTmjyidLIoFG/efaGSbN1AD9EdvrykDU4xOG
aGaO8TooGUZf7vAL8tIFuMeydYvi/gM=
=Qu4T
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-09-23
We've added 9 non-merge commits during the last 33 day(s) which contain
a total of 10 files changed, 480 insertions(+), 53 deletions(-).
The main changes are:
1) A new bpf_xdp_pull_data kfunc that supports pulling data from
a frag into the linear area of a xdp_buff, from Amery Hung.
This includes changes in the xdp_native.bpf.c selftest, which
Nimrod's future work depends on.
It is a merge from a stable branch 'xdp_pull_data' which has
also been merged to bpf-next.
There is a conflict with recent changes in 'include/net/xdp.h'
in the net-next tree that will need to be resolved.
2) A compiler warning fix when CONFIG_NET=n in the recent dynptr
skb_meta support, from Jakub Sitnicki.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests: drv-net: Pull data before parsing headers
selftests/bpf: Test bpf_xdp_pull_data
bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN
bpf: Make variables in bpf_prog_test_run_xdp less confusing
bpf: Clear packet pointers after changing packet data in kfuncs
bpf: Support pulling non-linear xdp data
bpf: Allow bpf_xdp_shrink_data to shrink a frag from head and tail
bpf: Clear pfmemalloc flag when freeing all fragments
bpf: Return an error pointer for skb metadata when CONFIG_NET=n
====================
Link: https://patch.msgid.link/20250924050303.2466356-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* for-next/selftests:
kselftest/arm64: Add lsfe to the hwcaps test
kselftest/arm64: Check that unsupported regsets fail in sve-ptrace
kselftest/arm64: Verify that we reject out of bounds VLs in sve-ptrace
kselftest/arm64/gcs/basic-gcs: Respect parent directory CFLAGS
selftests/arm64: Fix grammatical error in string literals
kselftest/arm64: Add parentheses around sizeof for clarity
kselftest/arm64: Supress warning and improve readability
kselftest/arm64: Remove extra blank line
kselftest/arm64/gcs: Use nolibc's getauxval()
kselftest/arm64/gcs: Correctly check return value when disabling GCS
selftests: arm64: Fix -Waddress warning in tpidr2 test
kselftest/arm64: Log error codes in sve-ptrace
selftests: arm64: Check fread return value in exec_target
Add a test case for bug resolved with:
'netfilter: nft_set_pipapo_avx2: fix skip of expired entries'.
It passes on nf.git (it uses the generic/C version for insertion
duplicate check) but fails on unpatched nf-next if AVX2 is supported:
cannot create same element twice 0s [FAIL]
Could create element twice in same transaction
table inet filter { # handle 8
[..]
elements = { 1.2.3.4 . 1.2.4.1 counter packets 0 bytes 0,
1.2.4.1 . 1.2.3.4 counter packets 0 bytes 0,
1.2.3.4 . 1.2.4.1 counter packets 0 bytes 0,
1.2.4.1 . 1.2.3.4 counter packets 0 bytes 0 }
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Adding test to check we can't attach kprobe multi program
that writes to the context.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can't attach standard kprobe program that
writes to the context.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can change the application execution
through instruction pointer change through uprobe program.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test to check we can change common register values through
uprobe program.
It's x86_64 specific test.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The previous patch fixed an issue whereby no FDB entry would be created for
the bridge itself on VLAN 0 under some circumstances. This could break
forwarding. Add a test for the fix.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/137cc25396f5a4f407267af895a14bc45552ba5f.1758550408.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following test cases for both IPv4 and IPv6:
* Can change from FDB nexthop to non-FDB nexthop and vice versa.
* Can change FDB nexthop address while in a group.
* Cannot change from FDB nexthop to non-FDB nexthop and vice versa while
in a group.
Output without "nexthop: Forbid FDB status change while nexthop is in a
group":
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal"
IPv6 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [FAIL]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [FAIL]
[...]
IPv4 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [FAIL]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [FAIL]
[...]
Tests passed: 36
Tests failed: 4
Tests skipped: 0
Output with "nexthop: Forbid FDB status change while nexthop is in a
group":
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal"
IPv6 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
TEST: Replace FDB nexthop to non-FDB nexthop [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop [ OK ]
TEST: Replace FDB nexthop address while in a group [ OK ]
TEST: Replace FDB nexthop to non-FDB nexthop while in a group [ OK ]
TEST: Replace non-FDB nexthop to FDB nexthop while in a group [ OK ]
[...]
Tests passed: 40
Tests failed: 0
Tests skipped: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test creates non-FDB nexthops without a nexthop device which leads
to the expected failure, but for the wrong reason:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 63 via 2001:db8:91::4
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 64 via 2001:db8:91::5
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 63/64 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 14 via 172.16.1.2
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 15 via 172.16.1.3
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 14/15 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-nRsN3E nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 104 group 14/15
Error: Invalid nexthop id.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-0dlhyd ro add 172.16.0.0/22 nhid 15
Error: Nexthop id does not exist.
TEST: Route add with fdb nexthop [ OK ]
In addition, as can be seen in the above output, a couple of IPv4 test
cases used the non-FDB nexthops (14 and 15) when they intended to use
the FDB nexthops (16 and 17). These test cases only passed because
failure was expected, but they failed for the wrong reason.
Fix the test to create the non-FDB nexthops with a nexthop device and
adjust the IPv4 test cases to use the FDB nexthops instead of the
non-FDB nexthops.
Output after the fix:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 63 via 2001:db8:91::4 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 64 via 2001:db8:91::5 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 63/64 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 14 via 172.16.1.2 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 15 via 172.16.1.3 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 14/15 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-lNzfHP nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 104 group 16/17
Error: Non FDB nexthop group cannot have fdb nexthops.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-lNzfHP ro add 172.16.0.0/22 nhid 16
Error: Route cannot point to a fdb nexthop.
TEST: Route add with fdb nexthop [ OK ]
[...]
Tests passed: 30
Tests failed: 0
Tests skipped: 0
Fixes: 0534c5489c ("selftests: net: add fdb nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rtnetlink FOU selftest prints an incorrect string:
"FAIL: fou"s. Change it to the intended "FAIL: fou" by
removing a stray character in the end_test string of the test.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250921192111.1567498-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is possible for drivers to generate xdp packets with data residing
entirely in fragments. To keep parsing headers using direct packet
access, call bpf_xdp_pull_data() to pull headers into the linear data
area.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-9-ameryhung@gmail.com
The madv_populate and soft-dirty kselftests currently fail on systems
where CONFIG_MEM_SOFT_DIRTY is disabled.
Introduce a new helper softdirty_supported() into vm_util.c/h to ensure
tests are properly skipped when the feature is not enabled.
Link: https://lkml.kernel.org/r/20250917133137.62802-1-lance.yang@linux.dev
Fixes: 9f3265db6a ("selftests: vm: add test for Soft-Dirty PTE bit")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test bpf_xdp_pull_data() with xdp packets with different layouts. The
xdp bpf program first checks if the layout is as expected. Then, it
calls bpf_xdp_pull_data(). Finally, it checks the 0xbb marker at offset
1024 using directly packet access.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-8-ameryhung@gmail.com
To test bpf_xdp_pull_data(), an xdp packet containing fragments as well
as free linear data area after xdp->data_end needs to be created.
However, bpf_prog_test_run_xdp() always fills the linear area with
data_in before creating fragments, leaving no space to pull data. This
patch will allow users to specify the linear data size through
ctx->data_end.
Currently, ctx_in->data_end must match data_size_in and will not be the
final ctx->data_end seen by xdp programs. This is because ctx->data_end
is populated according to the xdp_buff passed to test_run. The linear
data area available in an xdp_buff, max_linear_sz, is alawys filled up
before copying data_in into fragments.
This patch will allow users to specify the size of data that goes into
the linear area. When ctx_in->data_end is different from data_size_in,
only ctx_in->data_end bytes of data will be put into the linear area when
creating the xdp_buff.
While ctx_in->data_end will be allowed to be different from data_size_in,
it cannot be larger than the data_size_in as there will be no data to
copy from user space. If it is larger than the maximum linear data area
size, the layout suggested by the user will not be honored. Data beyond
max_linear_sz bytes will still be copied into fragments.
Finally, since it is possible for a NIC to produce a xdp_buff with empty
linear data area, allow it when calling bpf_test_init() from
bpf_prog_test_run_xdp() so that we can test XDP kfuncs with such
xdp_buff. This is done by moving lower-bound check to callers as most of
them already do except bpf_prog_test_run_skb(). The change also fixes a
bug that allows passing an xdp_buff with data < ETH_HLEN. This can
happen when ctx is used and metadata is at least ETH_HLEN.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-7-ameryhung@gmail.com
Commit 40863f4d6e ("bpftool: Add support for signing BPF programs")
added new options for "bpftool prog load" and "bpftool gen skeleton".
This commit brings the relevant update to the bash completion file.
We rework slightly the processing of options to make completion more
resilient for options that take an argument.
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20250923103802.57695-1-qmo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull sched_ext/for-6.17-fixes to receive:
55ed11b181 ("sched_ext: idle: Handle migration-disabled tasks in BPF code")
which conflicts with the following commit in for-6.18:
2407bae23d ("sched_ext: Add the @sch parameter to ext_idle helpers")
The conflict is a simple context conflict which can be resolved by taking
the updated parts from both commits.
Signed-off-by: Tejun Heo <tj@kernel.org>
Add test coverage for union argument support using fexit programs:
* 8B union argument - verify that the verifier accepts it and that fexit
programs can trace such functions.
* 16B union argument - verify that the verifier accepts it and that
fexit programs can access the argument, which is passed using two
registers.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250919044110.23729-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
scx_qmap currently outputs verbose debug messages including cgroup operations
and CPU online/offline events by default, which can be noisy during normal
operation. While the existing -P option controls DSQ dumps and event
statistics, there's no way to suppress the other debug messages.
Split the debug output controls to make scx_qmap quieter by default. The -P
option continues to control DSQ dumps and event statistics
(print_dsqs_and_events), while a new -M option controls debug messages like
cgroup operations and CPU events (print_msgs). This allows users to run
scx_qmap with minimal output and selectively enable debug information as
needed.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The qmap dump operation was destructively consuming queue entries while
displaying them. As dump can be triggered anytime, this can easily lead to
stalls. Add a temporary dump_store queue and modify the dump logic to pop
entries, display them, and then restore them back to the original queue.
This allows dump operations to be performed without affecting the
scheduler's queue state.
Note that if racing against new enqueues during dump, ordering can get
mixed up, but this is acceptable for debugging purposes.
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add tests for loading 8, 16, and 32 bits with sign extension from arena,
also verify that exception handling is working correctly and correct
assembly is being generated by the x86 and arm64 JITs.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250923110157.18326-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The prerequisites section listed non-existent packages
"phython-gnuplot" and "phython3-gnuplot", which may mislead users and
cause installation failures.
Update the names to the correct distribution package names
"python-gnuplot" and "python3-gnuplot", helping users avoid confusion
and saving time for those following the instructions.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Add a check in the MSRs test to verify that KVM's reported support for
MSRs with feature bits is consistent between KVM's MSR save/restore lists
and KVM's supported CPUID.
To deal with Intel's wonderful decision to bundle IBT and SHSTK under CET,
track the "second" feature to avoid false failures when running on a CPU
with only one of IBT or SHSTK.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-51-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add test coverage for the KVM-defined GUEST_SSP "register" in the MSRs
test. While _KVM's_ goal is to not tie the uAPI of KVM-defined registers
to any particular internal implementation, i.e. to not commit in uAPI to
handling GUEST_SSP as an MSR, treating GUEST_SSP as an MSR for testing
purposes is a-ok and is a naturally fit given the semantics of SSP.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-50-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When KVM_{G,S}ET_ONE_REG are supported, verify that MSRs can be accessed
via ONE_REG and through the dedicated MSR ioctls. For simplicity, run
the test twice, e.g. instead of trying to get MSR values into the exact
right state when switching write methods.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-49-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a third vCPUs to the MSRs test that runs with all features disabled in
the vCPU's CPUID model, to verify that KVM does the right thing with
respect to emulating accesses to MSRs that shouldn't exist. Use the same
VM to verify that KVM is honoring the vCPU model, e.g. isn't looking at
per-VM state when emulating MSR accesses.
Link: https://lore.kernel.org/r/20250919223258.1604852-48-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the MSRs test to support {S,U}_CET, which are a bit of a pain to
handled due to the MSRs existing if IBT *or* SHSTK is supported. To deal
with Intel's wonderful decision to bundle IBT and SHSTK under CET, track
the second feature, but skip only RDMSR #GP tests to avoid false failures
when running on a CPU with only one of IBT or SHSTK (the WRMSR #GP tests
are still valid since the enable bits are per-feature).
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-47-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a selftest to verify reads and writes to various MSRs, from both the
guest and host, and expect success/failure based on whether or not the
vCPU supports the MSR according to supported CPUID.
Note, this test is extremely similar to KVM-Unit-Test's "msr" test, but
provides more coverage with respect to host accesses, and will be extended
to provide addition testing of CPUID-based features, save/restore lists,
and KVM_{G,S}ET_ONE_REG, all which are extremely difficult to validate in
KUT.
If kvm.ignore_msrs=true, skip the unsupported and reserved testcases as
KVM's ABI is a mess; what exactly is supposed to be ignored, and when,
varies wildly.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-46-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Merge the queue of KVM selftests changes for 6.18 to pick up the ex_str()
helper so that it can be used to pretty print expected versus actual
exceptions in a new MSR selftest. CET virtualization will add support for
several MSRs with non-trivial semantics, along with new uAPI for accessing
the guest's Shadow Stack Pointer (SSP) from userspace.
Steal exception_mnemonic() from KVM-Unit-Tests as ex_str() (to keep line
lengths reasonable) and use it in assert messages that currently print the
raw vector number.
Co-developed-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-45-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
