During the dmem cgroup development, the parameters to the
dmem_cgroup_state_evict_valuable() and dmem_cgroup_try_charge() were
changed, but the documentation wasn't adjusted accordingly.
This results in a documentation build warning. Adjust the documentation
to reflect what the final functions parameters are.
Fixes: b168ed458d ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20250113160334.1f09f881@canb.auug.org.au/
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113092608.1349287-2-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
A warning was found:
WARNING: CPU: 10 PID: 3486953 at fs/kernfs/file.c:828
CPU: 10 PID: 3486953 Comm: rmdir Kdump: loaded Tainted: G
RIP: 0010:kernfs_should_drain_open_files+0x1a1/0x1b0
RSP: 0018:ffff8881107ef9e0 EFLAGS: 00010202
RAX: 0000000080000002 RBX: ffff888154738c00 RCX: dffffc0000000000
RDX: 0000000000000007 RSI: 0000000000000004 RDI: ffff888154738c04
RBP: ffff888154738c04 R08: ffffffffaf27fa15 R09: ffffed102a8e7180
R10: ffff888154738c07 R11: 0000000000000000 R12: ffff888154738c08
R13: ffff888750f8c000 R14: ffff888750f8c0e8 R15: ffff888154738ca0
FS: 00007f84cd0be740(0000) GS:ffff8887ddc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555f9fbe00c8 CR3: 0000000153eec001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
kernfs_drain+0x15e/0x2f0
__kernfs_remove+0x165/0x300
kernfs_remove_by_name_ns+0x7b/0xc0
cgroup_rm_file+0x154/0x1c0
cgroup_addrm_files+0x1c2/0x1f0
css_clear_dir+0x77/0x110
kill_css+0x4c/0x1b0
cgroup_destroy_locked+0x194/0x380
cgroup_rmdir+0x2a/0x140
It can be explained by:
rmdir echo 1 > cpuset.cpus
kernfs_fop_write_iter // active=0
cgroup_rm_file
kernfs_remove_by_name_ns kernfs_get_active // active=1
__kernfs_remove // active=0x80000002
kernfs_drain cpuset_write_resmask
wait_event
//waiting (active == 0x80000001)
kernfs_break_active_protection
// active = 0x80000001
// continue
kernfs_unbreak_active_protection
// active = 0x80000002
...
kernfs_should_drain_open_files
// warning occurs
kernfs_put_active
This warning is caused by 'kernfs_break_active_protection' when it is
writing to cpuset.cpus, and the cgroup is removed concurrently.
The commit 3a5a6d0c2b ("cpuset: don't nest cgroup_mutex inside
get_online_cpus()") made cpuset_hotplug_workfn asynchronous, This change
involves calling flush_work(), which can create a multiple processes
circular locking dependency that involve cgroup_mutex, potentially leading
to a deadlock. To avoid deadlock. the commit 76bb5ab8f6 ("cpuset: break
kernfs active protection in cpuset_write_resmask()") added
'kernfs_break_active_protection' in the cpuset_write_resmask. This could
lead to this warning.
After the commit 2125c0034c ("cgroup/cpuset: Make cpuset hotplug
processing synchronous"), the cpuset_write_resmask no longer needs to
wait the hotplug to finish, which means that concurrent hotplug and cpuset
operations are no longer possible. Therefore, the deadlock doesn't exist
anymore and it does not have to 'break active protection' now. To fix this
warning, just remove kernfs_break_active_protection operation in the
'cpuset_write_resmask'.
Fixes: bdb2fd7fc5 ("kernfs: Skip kernfs_drain_open_files() more aggressively")
Fixes: 76bb5ab8f6 ("cpuset: break kernfs active protection in cpuset_write_resmask()")
Reported-by: Ji Fa <jifa@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This code is based on the RDMA and misc cgroup initially, but now
uses page_counter. It uses the same min/low/max semantics as the memory
cgroup as a result.
There's a small mismatch as TTM uses u64, and page_counter long pages.
In practice it's not a problem. 32-bits systems don't really come with
>=4GB cards and as long as we're consistently wrong with units, it's
fine. The device page size may not be in the same units as kernel page
size, and each region might also have a different page size (VRAM vs GART
for example).
The interface is simple:
- Call dmem_cgroup_register_region()
- Use dmem_cgroup_try_charge to check if you can allocate a chunk of memory,
use dmem_cgroup__uncharge when freeing it. This may return an error code,
or -EAGAIN when the cgroup limit is reached. In that case a reference
to the limiting pool is returned.
- The limiting cs can be used as compare function for
dmem_cgroup_state_evict_valuable.
- After having evicted enough, drop reference to limiting cs with
dmem_cgroup_pool_state_put.
This API allows you to limit device resources with cgroups.
You can see the supported cards in /sys/fs/cgroup/dmem.capacity
You need to echo +dmem to cgroup.subtree_control, and then you can
partition device memory.
Co-developed-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Co-developed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20241204143112.1250983-1-dev@lankhorst.se
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Isolated CPUs are not allowed to be used in a non-isolated partition.
The only exception is the top cpuset which is allowed to contain boot
time isolated CPUs.
Commit ccac8e8de9 ("cgroup/cpuset: Fix remote root partition creation
problem") introduces a simplified scheme of including only partition
roots in sched domain generation. However, it does not properly account
for this exception case. This can result in leakage of isolated CPUs
into a sched domain.
Fix it by making sure that isolated CPUs are excluded from the top
cpuset before generating sched domains.
Also update the way the boot time isolated CPUs are handled in
test_cpuset_prs.sh to make sure that those isolated CPUs are really
isolated instead of just skipping them in the tests.
Fixes: ccac8e8de9 ("cgroup/cpuset: Fix remote root partition creation problem")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Task's cpuset pointer was removed by
commit 8793d854ed ("Task Control Groups: make cpusets a client of cgroups")
Paragraph "The task_lock() exception ...." was removed by
commit 2df167a300 ("cgroups: update comments in cpuset.c")
Remove stale text:
We also require taking task_lock() when dereferencing a
task's cpuset pointer. See "The task_lock() exception", at the end of this
comment.
Accessing a task's cpuset should be done in accordance with the
guidelines for accessing subsystem state in kernel/cgroup.c
and reformat.
Co-developed-by: Michal Koutný <mkoutny@suse.com>
Co-developed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- cpu.stat now also shows niced CPU time.
- Freezer and cpuset optimizations.
- Other misc changes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZztlgg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGbohAQDE/enqpAX9vSOpQPne4ZzgcPlGTrCwBcka3Z5z
4aOF0AD/SmdjcJ/EULisD/2O27ovsGAtqDjngrrZwNUTbCNkTQQ=
=pKyo
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpu.stat now also shows niced CPU time
- Freezer and cpuset optimizations
- Other misc changes
* tag 'cgroup-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Disable cpuset_cpumask_can_shrink() test if not load balancing
cgroup/cpuset: Further optimize code if CONFIG_CPUSETS_V1 not set
cgroup/cpuset: Enforce at most one rebuild_sched_domains_locked() call per operation
cgroup/cpuset: Revert "Allow suppression of sched domain rebuild in update_cpumasks_hier()"
MAINTAINERS: remove Zefan Li
cgroup/freezer: Add cgroup CGRP_FROZEN flag update helper
cgroup/freezer: Reduce redundant traversal for cgroup_freeze
cgroup/bpf: only cgroup v2 can be attached by bpf programs
Revert "cgroup: Fix memory leak caused by missing cgroup_bpf_offline"
selftests/cgroup: Fix compile error in test_cpu.c
cgroup/rstat: Selftests for niced CPU statistics
cgroup/rstat: Tracking cgroup-level niced CPU time
cgroup/cpuset: Fix spelling errors in file kernel/cgroup/cpuset.c
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
With some recent proposed changes [1] in the deadline server code,
it has caused a test failure in test_cpuset_prs.sh when a change
is being made to an isolated partition. This is due to failing
the cpuset_cpumask_can_shrink() check for SCHED_DEADLINE tasks at
validate_change().
This is actually a false positive as the failed test case involves an
isolated partition with load balancing disabled. The deadline check
is not meaningful in this case and the users should know what they
are doing.
Fix this by doing the cpuset_cpumask_can_shrink() check only when loading
balanced is enabled. Also change its arguments to use effective_cpus
for the current cpuset and user_xcpus() as an approiximation for the
target effective_cpus as the real effective_cpus hasn't been fully
computed yet as this early stage.
As the check isn't comprehensive, there may be false positives or
negatives. We may have to revise the code to do a more thorough check
in the future if this becomes a concern.
[1] https://lore.kernel.org/lkml/82be06c1-6d6d-4651-86c9-bcc828cbcb80@redhat.com/T/#t
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently the cpuset code uses group_subsys_on_dfl() to check if we
are running with cgroup v2. If CONFIG_CPUSETS_V1 isn't set, there is
really no need to do this check and we can optimize out some of the
unneeded v1 specific code paths. Introduce a new cpuset_v2() and use it
to replace the cgroup_subsys_on_dfl() check to further optimize the
code.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit ff0ce721ec ("cgroup/cpuset: Eliminate unncessary
sched domains rebuilds in hotplug"), there is only one
rebuild_sched_domains_locked() call per hotplug operation. However,
writing to the various cpuset control files may still casue more than
one rebuild_sched_domains_locked() call to happen in some cases.
Juri had found that two rebuild_sched_domains_locked() calls in
update_prstate(), one from update_cpumasks_hier() and another one from
update_partition_sd_lb() could cause cpuset partition to be created
with null total_bw for DL tasks. IOW, DL tasks may not be scheduled
correctly in such a partition.
A sample command sequence that can reproduce null total_bw is as
follows.
# echo Y >/sys/kernel/debug/sched/verbose
# echo +cpuset >/sys/fs/cgroup/cgroup.subtree_control
# mkdir /sys/fs/cgroup/test
# echo 0-7 > /sys/fs/cgroup/test/cpuset.cpus
# echo 6-7 > /sys/fs/cgroup/test/cpuset.cpus.exclusive
# echo root >/sys/fs/cgroup/test/cpuset.cpus.partition
Fix this double rebuild_sched_domains_locked() calls problem
by replacing existing calls with cpuset_force_rebuild() except
the rebuild_sched_domains_cpuslocked() call at the end of
cpuset_handle_hotplug(). Checking of the force_sd_rebuild flag is
now done at the end of cpuset_write_resmask() and update_prstate()
to determine if rebuild_sched_domains_locked() should be called or not.
The cpuset v1 code can still call rebuild_sched_domains_locked()
directly as double rebuild_sched_domains_locked() calls is not possible.
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Closes: https://lore.kernel.org/lkml/ZyuUcJDPBln1BK1Y@jlelli-thinkpadt14gen4.remote.csb/
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Revert commit 3ae0b77321 ("cgroup/cpuset: Allow suppression of sched
domain rebuild in update_cpumasks_hier()") to allow for an alternative
way to suppress unnecessary rebuild_sched_domains_locked() calls in
update_cpumasks_hier() and elsewhere in a following commit.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
reference acquired there by fget_raw() is not stashed anywhere -
we could as well borrow instead.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add help to update cgroup CGRP_FROZEN flag. Both cgroup_propagate_frozen
and cgroup_update_frozen functions update CGRP_FROZEN flag, this makes
code concise.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Whether a cgroup is frozen is determined solely by whether it is set to
to be frozen and whether its parent is frozen. Currently, when is cgroup
is frozen or unfrozen, it iterates through the entire subtree to freeze
or unfreeze its descentdants. However, this is unesessary for a cgroup
that does not change its effective frozen status. This path aims to skip
the subtree if its parent does not have a change in effective freeze.
For an example, subtree like, a-b-c-d-e-f-g, when a is frozen, the
entire tree is frozen. If we freeze b and c again, it is unesessary to
iterate d, e, f and g. So does that If we unfreeze b/c.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Only cgroup v2 can be attached by bpf programs, so this patch introduces
that cgroup_bpf_inherit and cgroup_bpf_offline can only be called in
cgroup v2, and this can fix the memleak mentioned by commit 04f8ef5643
("cgroup: Fix memory leak caused by missing cgroup_bpf_offline"), which
has been reverted.
Fixes: 2b0d3d3e4f ("percpu_ref: reduce memory footprint of percpu_ref in fast path")
Fixes: 4bfc0bb2c6 ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself")
Link: https://lore.kernel.org/cgroups/aka2hk5jsel5zomucpwlxsej6iwnfw4qu5jkrmjhyfhesjlfdw@46zxhg5bdnr7/
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit 04f8ef5643.
Only cgroup v2 can be attached by cgroup by BPF programs. Revert this
commit and cgroup_bpf_inherit and cgroup_bpf_offline won't be called in
cgroup v1. The memory leak issue will be fixed with next patch.
Fixes: 04f8ef5643 ("cgroup: Fix memory leak caused by missing cgroup_bpf_offline")
Link: https://lore.kernel.org/cgroups/aka2hk5jsel5zomucpwlxsej6iwnfw4qu5jkrmjhyfhesjlfdw@46zxhg5bdnr7/
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup.max.depth is the maximum allowed descent depth below the current
cgroup. If the actual descent depth is equal or larger, an attempt to
create a new child cgroup will fail. However due to the cgroup->max_depth
is of int type and having the default value INT_MAX, the condition
'level > cgroup->max_depth' will never be satisfied, and it will cause
an overflow of the level after it reaches to INT_MAX.
Fix it by starting the level from 0 and using '>=' instead.
It's worth mentioning that this issue is unlikely to occur in reality,
as it's impossible to have a depth of INT_MAX hierarchy, but should be
be avoided logically.
Fixes: 1a926e0bba ("cgroup: implement hierarchy limits")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cgroup-level CPU statistics currently include time spent on
user/system processes, but do not include niced CPU time (despite
already being tracked). This patch exposes niced CPU time to the
userspace, allowing users to get a better understanding of their
hardware limits and can facilitate more informed workload distribution.
A new field 'ntime' is added to struct cgroup_base_stat as opposed to
struct task_cputime to minimize footprint.
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
This is a followup to CONFIG-urability of cpuset and memory controllers
for v1 hierarchies. Make the output in /proc/cgroups reflect that
!CONFIG_CPUSETS_V1 is like !CONFIG_CPUSETS and
!CONFIG_MEMCG_V1 is like !CONFIG_MEMCG.
The intended effect is that hiding the unavailable controllers will hint
users not to try mounting them on v1.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The configs that disable some v1 controllers would still allow mounting
them but with no controller-specific files. (Making such hierarchies
equivalent to named v1 hierarchies.) To achieve behavior consistent with
actual out-compilation of a whole controller, the mounts should treat
respective controllers as non-existent.
Wrap implementation into a helper function, leverage legacy_files to
detect compiled out controllers. The effect is that mounts on v1 would
fail and produce a message like:
[ 1543.999081] cgroup: Unknown subsys name 'memory'
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cpuset filesystem is a legacy interface to cpuset controller with
(pre-)v1 features. It makes little sense to co-mount it on systems
without cpuset v1, so do not build it when cpuset v1 is not built
neither.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Patch series "Improve mem_cgroup_iter()", v4.
Incremental cgroup iteration is being used again [1]. This patchset
improves the reliability of mem_cgroup_iter(). It also improves
simplicity and code readability.
[1] https://lore.kernel.org/20240514202641.2821494-1-hannes@cmpxchg.org/
This patch (of 5):
Explicitly document that css sibling/descendant linkage is protected by
cgroup_mutex or RCU. Also, document in css_next_descendant_pre() and
similar functions that it isn't necessary to hold a ref on @pos.
The following changes in this patchset rely on this clarification for
simplification in memcg iteration code.
Link: https://lkml.kernel.org/r/20240905003058.1859929-1-kinseyho@google.com
Link: https://lkml.kernel.org/r/20240905003058.1859929-2-kinseyho@google.com
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The newly created cpuset-v1.c file uses cpus_read_lock/unlock() functions
which are defined in cpu.h but not included in cpuset-internal.h yet
leading to compilation error under certain kernel configurations. Fix it
by moving the cpu.h include from cpuset.c to cpuset-internal.h. While
at it, sort the include files in alphabetic order.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408311612.mQTuO946-lkp@intel.com/
Fixes: 047b830974 ("cgroup/cpuset: move relax_domain_level to cpuset-v1.c")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Patch series "mm, memcg: cg2 memory{.swap,}.peak write handlers", v7.
This patch (of 2):
Other mechanisms for querying the peak memory usage of either a process or
v1 memory cgroup allow for resetting the high watermark. Restore parity
with those mechanisms, but with a less racy API.
For example:
- Any write to memory.max_usage_in_bytes in a cgroup v1 mount resets
the high watermark.
- writing "5" to the clear_refs pseudo-file in a processes's proc
directory resets the peak RSS.
This change is an evolution of a previous patch, which mostly copied the
cgroup v1 behavior, however, there were concerns about races/ownership
issues with a global reset, so instead this change makes the reset
filedescriptor-local.
Writing any non-empty string to the memory.peak and memory.swap.peak
pseudo-files reset the high watermark to the current usage for subsequent
reads through that same FD.
Notably, following Johannes's suggestion, this implementation moves the
O(FDs that have written) behavior onto the FD write(2) path. Instead, on
the page-allocation path, we simply add one additional watermark to
conditionally bump per-hierarchy level in the page-counter.
Additionally, this takes Longman's suggestion of nesting the
page-charging-path checks for the two watermarks to reduce the number of
common-case comparisons.
This behavior is particularly useful for work scheduling systems that need
to track memory usage of worker processes/cgroups per-work-item. Since
memory can't be squeezed like CPU can (the OOM-killer has opinions), these
systems need to track the peak memory usage to compute system/container
fullness when binpacking workitems.
Most notably, Vimeo's use-case involves a system that's doing global
binpacking across many Kubernetes pods/containers, and while we can use
PSI for some local decisions about overload, we strive to avoid packing
workloads too tightly in the first place. To facilitate this, we track
the peak memory usage. However, since we run with long-lived workers (to
amortize startup costs) we need a way to track the high watermark while a
work-item is executing. Polling runs the risk of missing short spikes
that last for timescales below the polling interval, and peak memory
tracking at the cgroup level is otherwise perfect for this use-case.
As this data is used to ensure that binpacked work ends up with sufficient
headroom, this use-case mostly avoids the inaccuracies surrounding
reclaimable memory.
Link: https://lkml.kernel.org/r/20240730231304.761942-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-2-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch introduces CONFIG_CPUSETS_V1 and guard cpuset-v1 code under
CONFIG_CPUSETS_V1. The default value of CONFIG_CPUSETS_V1 is N, so that
user who adopted v2 don't have 'pay' for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Some functions name declared in cpuset-internel.h are generic. To avoid
confilicting with other variables for the same name, rename these
functions with cpuset_/cpuset1_ prefix to make them unique to cpuset.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move legacy cpuset controller interfaces files and corresponding code
into cpuset-v1.c. 'update_flag', 'cpuset_write_resmask' and
'cpuset_common_seq_show' are also used for v1, so declare them in
cpuset-internal.h.
'cpuset_write_s64', 'cpuset_read_s64' and 'fmeter_getrate' are only used
cpuset-v1.c now, make it static.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The validate_change_legacy functions is used for v1, move it to
cpuset-v1.c. And two micro 'cpuset_for_each_child' and
'cpuset_for_each_descendant_pre' are common for v1 and v2, move them to
cpuset-internal.h.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There are some differents about hotplug update between cpuset v1 and
cpuset v2. Move the legacy code to cpuset-v1.c.
'update_tasks_cpumask' and 'update_tasks_nodemask' are both used in cpuset
v1 and cpuset v2, declare them in cpuset-internal.h.
The change from original code is that use callback_lock helpers to get
callback_lock lock/unlock.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
To modify cpuset, both cpuset_mutex and callback_lock are needed. Add
helpers for cpuset-v1 to get callback_lock.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
'memory_spread' is only set in cpuset v1. move corresponding code into
cpuset-v1.c.
Currently, 'cpuset_update_task_spread_flags' and 'update_tasks_flags' are
exposed to cpuset.c.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Setting domain level is not supported at cpuset v2, so move corresponding
code into cpuset-v1.c.
The 'cpuset_write_s64' and 'cpuset_read_s64' are only used for setting
domain level, move them to cpuset-v1.c. Currently, expose to cpuset.c.
After cpuset legacy interface files are move to cpuset-v1.c, they can
be static. The 'rebuild_sched_domains_locked' is exposed to cpuset-v1.c.
The change from original code is that using 'cpuset_lock' and
'cpuset_unlock' functions to lock or unlock cpuset_mutex.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Collection of memory_pressure can be enabled by writing 1 to the cpuset
file 'memory_pressure_enabled', which is only for cpuset-v1. Therefore,
move the corresponding code to cpuset-v1.c.
Currently, the 'fmeter_init' and 'fmeter_getrate' functions are called
at cpuset.c, so expose them to cpuset.c.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Move some declarations that will be used for cpuset v1 and v2,
including 'cpuset struct', 'cpuset_flagbits_t', cpuset_filetype_t,etc.
No logical change.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch introduces the cgroup/cpuset-v1.c source file which will be
used for all legacy (cgroup v1) cpuset cgroup code. It also introduces
cgroup/cpuset-internal.h to keep declarations shared between
cgroup/cpuset.c and cpuset/cpuset-v1.c.
As of now, let's compile it if CONFIG_CPUSET is set. Later on it can be
switched to use a separate config option, so that the legacy code won't be
compiled if not required.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
With the "isolcpus" boot command line parameter, we are able to
create isolated CPUs at boot time. These isolated CPUs aren't fully
accounted for in the cpuset code. For instance, the root cgroup's
"cpuset.cpus.isolated" control file does not include the boot time
isolated CPUs. Fix that by looking for pre-isolated CPUs at init time.
The prstate_housekeeping_conflict() function does check the
HK_TYPE_DOMAIN housekeeping cpumask to make sure that CPUs outside of it
can only be used in isolated partition. Given the fact that we are going
to make housekeeping cpumasks dynamic, the current check may not be right
anymore. Save the boot time HK_TYPE_DOMAIN cpumask and check against
it instead of the upcoming dynamic HK_TYPE_DOMAIN housekeeping cpumask.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
use_parent_ecpus is used to track whether the children are using the
parent's effective_cpus. When a parent's effective_cpus is changed
due to changes in a child partition's effective_xcpus, any child
using parent'effective_cpus must call update_cpumasks_hier. However,
if a child is not a valid partition, it is sufficient to determine
whether to call update_cpumasks_hier based on whether the child's
effective_cpus is going to change. To make the code more succinct,
it is suggested to remove use_parent_ecpus.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Both fetch_xcpus and user_xcpus functions are used to retrieve the value
of exclusive_cpus. If exclusive_cpus is not set, cpus_allowed is the
implicit value used as exclusive in a local partition. I can not imagine
a scenario where effective_xcpus is not empty when exclusive_cpus is
empty. Therefore, I suggest removing the fetch_xcpus function.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When enable a remote partition, I found that:
cd /sys/fs/cgroup/
mkdir test
mkdir test/test1
echo +cpuset > cgroup.subtree_control
echo +cpuset > test/cgroup.subtree_control
echo 3 > test/test1/cpuset.cpus
echo root > test/test1/cpuset.cpus.partition
cat test/test1/cpuset.cpus.partition
root invalid (Parent is not a partition root)
The parent of a remote partition could not be a root. This is due to the
emtpy effective_xcpus. It would be better to prompt the message "invalid
cpu list in cpuset.cpus.exclusive".
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The comment in cgroup_file_write is missing some interfaces, such as
'cgroup.threads'. All delegatable files are listed in
'/sys/kernel/cgroup/delegate', so update the comment in cgroup_file_write.
Besides, add a statement that files outside the namespace shouldn't be
visible from inside the delegated namespace.
tj: Reflowed text for consistency.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It turns out that the WARN_ON_ONCE() call in css_release_work_fn
introduced by commit ab03125268 ("cgroup: Show # of subsystem CSSes
in cgroup.stat") is incorrect. Although css->nr_descendants must be
0 when a css is released and ready to be freed, the corresponding
cgrp->nr_dying_subsys[ss->id] may not be 0 if a subsystem is activated
and deactivated multiple times with one or more of its previous
activation leaving behind dying csses.
Fix the incorrect warning by removing the cgrp->nr_dying_subsys check.
Fixes: ab03125268 ("cgroup: Show # of subsystem CSSes in cgroup.stat")
Closes: https://lore.kernel.org/cgroups/6f301773-2fce-4602-a391-8af7ef00b2fb@redhat.com/T/#t
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
With the previous commit that eliminates the overlapping partition
root corner cases in the hotplug code, the partition roots passed down
to generate_sched_domains() should not have overlapping CPUs. Enable
overlapping cpuset check for v2 and warn if that happens.
This patch also has the benefit of increasing test coverage of the new
Union-Find cpuset merging code to cgroup v2.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup/for-6.12 is about to receive updates that are dependent on changes
from both for-6.11-fixes and for-6.12. Pull in for-6.11-fixes.
Signed-off-by: Tejun Heo <tj@kernel.org>
It was found that some hotplug operations may cause multiple
rebuild_sched_domains_locked() calls. Some of those intermediate calls
may use cpuset states not in the final correct form leading to incorrect
sched domain setting.
Fix this problem by using the existing force_rebuild flag to inhibit
immediate rebuild_sched_domains_locked() calls if set and only doing
one final call at the end. Also renaming the force_rebuild flag to
force_sd_rebuild to make its meaning for clear.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for
v2") adds a user writable cpuset.cpus.exclusive file for setting
exclusive CPUs to be used for the creation of partitions. Since then
effective_xcpus depends on both the cpuset.cpus and cpuset.cpus.exclusive
setting. If cpuset.cpus.exclusive is set, effective_xcpus will depend
only on cpuset.cpus.exclusive. When it is not set, effective_xcpus
will be set according to the cpuset.cpus value when the cpuset becomes
a valid partition root.
When cpuset.cpus is being cleared by the user, effective_xcpus should
only be cleared when cpuset.cpus.exclusive is not set. However, that
is not currently the case.
# cd /sys/fs/cgroup/
# mkdir test
# echo +cpuset > cgroup.subtree_control
# cd test
# echo 3 > cpuset.cpus.exclusive
# cat cpuset.cpus.exclusive.effective
3
# echo > cpuset.cpus
# cat cpuset.cpus.exclusive.effective // was cleared
Fix it by clearing effective_xcpus only if cpuset.cpus.exclusive is
not set.
Fixes: e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
Cc: stable@vger.kernel.org # v6.7+
Reported-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
According to the implementation of cgroup_css_set_fork(), it will fail
if cset cannot be found and the can_fork/cancel_fork methods will not
be called in this case, which means that the argument 'cset' for these
methods must not be NULL, so remove the unrechable paths in them.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cgroup subsystem state (CSS) is an abstraction in the cgroup layer to
help manage different structures in various cgroup subsystems by being
an embedded element inside a larger structure like cpuset or mem_cgroup.
The /proc/cgroups file shows the number of cgroups for each of the
subsystems. With cgroup v1, the number of CSSes is the same as the
number of cgroups. That is not the case anymore with cgroup v2. The
/proc/cgroups file cannot show the actual number of CSSes for the
subsystems that are bound to cgroup v2.
So if a v2 cgroup subsystem is leaking cgroups (usually memory cgroup),
we can't tell by looking at /proc/cgroups which cgroup subsystems may
be responsible.
As cgroup v2 had deprecated the use of /proc/cgroups, the hierarchical
cgroup.stat file is now being extended to show the number of live and
dying CSSes associated with all the non-inhibited cgroup subsystems that
have been bound to cgroup v2. The number includes CSSes in the current
cgroup as well as in all the descendants underneath it. This will help
us pinpoint which subsystems are responsible for the increasing number
of dying (nr_dying_descendants) cgroups.
The CSSes dying counts are stored in the cgroup structure itself
instead of inside the CSS as suggested by Johannes. This will allow
us to accurately track dying counts of cgroup subsystems that have
recently been disabled in a cgroup. It is now possible that a zero
subsystem number is coupled with a non-zero dying subsystem number.
The cgroup-v2.rst file is updated to discuss this new behavior.
With this patch applied, a sample output from root cgroup.stat file
was shown below.
nr_descendants 56
nr_subsys_cpuset 1
nr_subsys_cpu 43
nr_subsys_io 43
nr_subsys_memory 56
nr_subsys_perf_event 57
nr_subsys_hugetlb 1
nr_subsys_pids 56
nr_subsys_rdma 1
nr_subsys_misc 1
nr_dying_descendants 30
nr_dying_subsys_cpuset 0
nr_dying_subsys_cpu 0
nr_dying_subsys_io 0
nr_dying_subsys_memory 30
nr_dying_subsys_perf_event 0
nr_dying_subsys_hugetlb 0
nr_dying_subsys_pids 0
nr_dying_subsys_rdma 0
nr_dying_subsys_misc 0
Another sample output from system.slice/cgroup.stat was:
nr_descendants 34
nr_subsys_cpuset 0
nr_subsys_cpu 32
nr_subsys_io 32
nr_subsys_memory 34
nr_subsys_perf_event 35
nr_subsys_hugetlb 0
nr_subsys_pids 34
nr_subsys_rdma 0
nr_subsys_misc 0
nr_dying_descendants 30
nr_dying_subsys_cpuset 0
nr_dying_subsys_cpu 0
nr_dying_subsys_io 0
nr_dying_subsys_memory 30
nr_dying_subsys_perf_event 0
nr_dying_subsys_hugetlb 0
nr_dying_subsys_pids 0
nr_dying_subsys_rdma 0
nr_dying_subsys_misc 0
Note that 'debug' controller wasn't used to provide this information because
the controller is not recommended in productions kernels, also many of them
won't enable CONFIG_CGROUP_DEBUG by default.
Similar information could be retrieved with debuggers like drgn but that's
also not always available (e.g. lockdown) and the additional cost of runtime
tracking here is deemed marginal.
tj: Added Michal's paragraphs on why this is not added the debug controller
to the commit message.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Cc: Michal Koutný <mkoutny@suse.com>
Link: http://lkml.kernel.org/r/20240715150034.2583772-1-longman@redhat.com
Signed-off-by: Tejun Heo <tj@kernel.org>
The process of constructing scheduling domains
involves multiple loops and repeated evaluations, leading to numerous
redundant and ineffective assessments that impact code efficiency.
Here, we use union-find to optimize the merging of cpumasks. By employing
path compression and union by rank, we effectively reduce the number of
lookups and merge comparisons.
Signed-off-by: Xavier <xavier_qy@163.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There are several functions to decrease attach_in_progress, and they
will wake up cpuset_attach_wq when attach_in_progress is zero. So,
add a helper to make it concise.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since the SLAB implementation was removed in v6.8, so the
cpuset_slab_spread_rotor is no longer used and can be removed.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently when a process in a group forks and fails due to it's
parent's max restriction, all the cgroups from 'pids_forking' to root
will generate event notifications but only the cgroups from
'pids_over_limit' to root will increase the counter of PIDCG_MAX.
Consider this scenario: there are 4 groups A, B, C,and D, the
relationships are as follows, and user is watching on C.pids.events.
root->A->B->C->D
When a process in D forks and fails due to B.max restriction, the
user will get a spurious event notification because when he wakes up
and reads C.pids.events, he will find that the content has not changed.
To address this issue, only the cgroups from 'pids_over_limit' to root
will have their PIDCG_MAX counters increased and event notifications
generated.
Fixes: 385a635cac ("cgroup/pids: Make event counters hierarchical")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The child_ecpus_count variable was previously used to update
sibling cpumask when parent's effective_cpus is updated. However, it became
obsolete after commit e2ffe502ba ("cgroup/cpuset: Add
cpuset.cpus.exclusive for v2"). It should be removed.
tj: Restored {} for style consistency.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently the event counting provided by misc.events is hierarchical,
it's not practical if user is only concerned with events of a
specified cgroup. Therefore, introduce misc.events.local collect events
specific to the given cgroup.
This is analogous to memory.events.local and pids.events.local.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In the function cgroup_base_stat_cputime_show, there are five
instances of #ifdef, which makes the code not concise.
To address this, add the function cgroup_force_idle_show
to make the code more succinct.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The writing of css->cgroup associated with the cgroup root in
rebind_subsystems() is currently protected only by cgroup_mutex.
However, the reading of css->cgroup in both proc_cpuset_show() and
proc_cgroup_show() is protected just by css_set_lock. That makes the
readers susceptible to racing problems like data tearing or caching.
It is also a problem that can be reported by KCSAN.
This can be fixed by using READ_ONCE() and WRITE_ONCE() to access
css->cgroup. Alternatively, the writing of css->cgroup can be moved
under css_set_lock as well which is done by this patch.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Introduce misc.peak to record the historical maximum usage of the
resource, as in some scenarios the value of misc.max could be
adjusted based on the peak usage of the resource.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
An UAF can happen when /proc/cpuset is read as reported in [1].
This can be reproduced by the following methods:
1.add an mdelay(1000) before acquiring the cgroup_lock In the
cgroup_path_ns function.
2.$cat /proc/<pid>/cpuset repeatly.
3.$mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset/
$umount /sys/fs/cgroup/cpuset/ repeatly.
The race that cause this bug can be shown as below:
(umount) | (cat /proc/<pid>/cpuset)
css_release | proc_cpuset_show
css_release_work_fn | css = task_get_css(tsk, cpuset_cgrp_id);
css_free_rwork_fn | cgroup_path_ns(css->cgroup, ...);
cgroup_destroy_root | mutex_lock(&cgroup_mutex);
rebind_subsystems |
cgroup_free_root |
| // cgrp was freed, UAF
| cgroup_path_ns_locked(cgrp,..);
When the cpuset is initialized, the root node top_cpuset.css.cgrp
will point to &cgrp_dfl_root.cgrp. In cgroup v1, the mount operation will
allocate cgroup_root, and top_cpuset.css.cgrp will point to the allocated
&cgroup_root.cgrp. When the umount operation is executed,
top_cpuset.css.cgrp will be rebound to &cgrp_dfl_root.cgrp.
The problem is that when rebinding to cgrp_dfl_root, there are cases
where the cgroup_root allocated by setting up the root for cgroup v1
is cached. This could lead to a Use-After-Free (UAF) if it is
subsequently freed. The descendant cgroups of cgroup v1 can only be
freed after the css is released. However, the css of the root will never
be released, yet the cgroup_root should be freed when it is unmounted.
This means that obtaining a reference to the css of the root does
not guarantee that css.cgrp->root will not be freed.
Fix this problem by using rcu_read_lock in proc_cpuset_show().
As cgroup_root is kfree_rcu after commit d23b5c5777
("cgroup: Make operations on the cgroup root_list RCU safe"),
css->cgroup won't be freed during the critical section.
To call cgroup_path_ns_locked, css_set_lock is needed, so it is safe to
replace task_get_css with task_css.
[1] https://syzkaller.appspot.com/bug?extid=9b1ff7be974a403aa4cd
Fixes: a79a908fd2 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The "cpuset.cpus.exclusive.effective" value is currently limited to a
subset of its "cpuset.cpus". This makes the exclusive CPUs distribution
hierarchy subsumed within the larger "cpuset.cpus" hierarchy. We have to
decide on what CPUs are used locally and what CPUs can be passed down as
exclusive CPUs down the hierarchy and combine them into "cpuset.cpus".
The advantage of the current scheme is to have only one hierarchy to
worry about. However, it make it harder to use as all the "cpuset.cpus"
values have to be properly set along the way down to the designated remote
partition root. It also makes it more cumbersome to find out what CPUs
can be used locally.
Make creation of remote partition simpler by breaking the
dependency of "cpuset.cpus.exclusive" on "cpuset.cpus" and make
them independent entities. Now we have two separate hierarchies -
one for setting "cpuset.cpus.effective" and the other one for setting
"cpuset.cpus.exclusive.effective". We may not need to set "cpuset.cpus"
when we activate a partition root anymore.
Also update Documentation/admin-guide/cgroup-v2.rst and cpuset.c comment
to document this change.
Suggested-by: Petr Malat <oss@malat.biz>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The CS_CPU_EXCLUSIVE flag is currently set whenever cpuset.cpus.exclusive
is set to make sure that the exclusivity test will be run to ensure its
exclusiveness. At the same time, this flag can be changed whenever the
partition root state is changed. For example, the CS_CPU_EXCLUSIVE flag
will be reset whenever a partition root becomes invalid. This makes
using CS_CPU_EXCLUSIVE to ensure exclusiveness a bit fragile.
The current scheme also makes setting up a cpuset.cpus.exclusive
hierarchy to enable remote partition harder as cpuset.cpus.exclusive
cannot overlap with any cpuset.cpus of sibling cpusets if their
cpuset.cpus.exclusive aren't set.
Solve these issues by deferring the setting of CS_CPU_EXCLUSIVE flag
until the cpuset become a valid partition root while adding new checks
in validate_change() to ensure that cpuset.cpus.exclusive of sibling
cpusets cannot overlap.
An additional check is also added to validate_change() to make sure that
cpuset.cpus of one cpuset cannot be a subset of cpuset.cpus.exclusive
of a sibling cpuset to avoid the problem that none of those CPUs will
be available when these exclusive CPUs are extracted out to a newly
enabled partition root. The Documentation/admin-guide/cgroup-v2.rst
file is updated to document the new constraints.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit 181c8e091a ("cgroup/cpuset: Introduce remote partition"),
a remote partition can be created underneath a non-partition root cpuset
as long as its exclusive_cpus are set to distribute exclusive CPUs down
to its children. The generate_sched_domains() function, however, doesn't
take into account this new behavior and hence will fail to create the
sched domain needed for a remote root (non-isolated) partition.
There are two issues related to remote partition support. First of
all, generate_sched_domains() has a fast path that is activated if
root_load_balance is true and top_cpuset.nr_subparts is non-zero. The
later condition isn't quite correct for remote partitions as nr_subparts
just shows the number of local child partitions underneath it. There
can be no local child partition under top_cpuset even if there are
remote partitions further down the hierarchy. Fix that by checking
for subpartitions_cpus which contains exclusive CPUs allocated to both
local and remote partitions.
Secondly, the valid partition check for subtree skipping in the csa[]
generation loop isn't enough as remote partition does not need to
have a partition root parent. Fix this problem by breaking csa[] array
generation loop of generate_sched_domains() into v1 and v2 specific parts
and checking a cpuset's exclusive_cpus before skipping its subtree in
the v2 case.
Also simplify generate_sched_domains() for cgroup v2 as only
non-isolating partition roots should be included in building the cpuset
array and none of the v1 scheduling attributes other than a different
way to create an isolated partition are supported.
Fixes: 181c8e091a ("cgroup/cpuset: Introduce remote partition")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_exit() needs to do this only if the exiting task is a leader and it
is not the last live thread. The patch doesn't use delay_group_leader(),
atomic_read(signal->live) matches the code css_task_iter_advance() more.
cgroup_release() can now check list_empty(task->cg_list) before it takes
css_set_lock and calls ss_set_skip_task_iters().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If only isolated partitions are being created underneath the cgroup root,
there will only be one sched domain with top_cpuset.effective_cpus. We can
skip the unnecessary sched domains scanning code and save some cycles.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In the cpuset_css_online(), clearing the CS_SCHED_LOAD_BALANCE bit
of cs->flags is guarded by callback_lock and cpuset_mutex. There is
no problem with itself, because it is consistent with the description
of there two global lock at the beginning of this file. However, since
the operation of checking, setting and clearing the flag bit is atomic,
protection of callback_lock is unnecessary here, see CS_SPREAD_*. so
to make it more consistent with the other code, move the operation
outside the critical section of callback_lock.
No functional changes intended.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Even though css_clear_dir would be called to cleanup
all existing cgroup files when css_populate_dir failed,
reclaiming newly created cgroup files before
css_populate_dir returns with failure makes code more
consistent.
Signed-off-by: David Wang <00107082@163.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Hierarchical counting of events is not practical for watching when a
particular pids.max is being hit. Therefore introduce .local flavor of
events file (akin to memory controller) that collects only events
relevant to given cgroup.
The file is only added to the default hierarchy.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The pids.events file should honor the hierarchy, so make the events
propagate from their origin up to the root on the unified hierarchy. The
legacy behavior remains non-hierarchical.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, when pids.max limit is breached in the hierarchy, the event
is counted and reported in the cgroup where the forking task resides.
This decouples the limit and the notification caused by the limit making
it hard to detect when the actual limit was effected.
Redefine the pids.events:max as: the number of times the limit of the
cgroup was hit.
(Implementation differentiates also "forkfail" event but this is
currently not exposed as it would better fit into pids.stat. It also
differs from pids.events:max only when pids.max is configured on
non-leaf cgroups.)
Since it changes semantics of the original "max" event, introduce this
change only in the v2 API of the controller and add a cgroup2 mount
option to revert to the legacy behavior.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit 51ffe41178 ("cpuset: convert away from cftype->read()"),
cpuset_common_file_read() has been renamed.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The struct cpuset is kzalloc'd, all the members are zeroed already,
so don't need nodes_clear() here.
No functional changes intended.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Change relax_domain_level checks so that it would be possible
to include or exclude all domains from newidle balancing.
This matches the behavior described in the documentation:
-1 no request. use system default or follow request of others.
0 no search.
1 search siblings (hyperthreads in a core).
"2" enables levels 0 and 1, level_max excludes the last (level_max)
level, and level_max+1 includes all levels.
Fixes: 1d3504fcf5 ("sched, cpuset: customize sched domains, core")
Signed-off-by: Vitalii Bursov <vitaly@bursov.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/bd6de28e80073c79466ec6401cdeae78f0d4423d.1714488502.git.vitaly@bursov.com
This closely resembles helpers added for the global cgroup_rstat_lock in
commit fc29e04ae1 ("cgroup/rstat: add cgroup_rstat_lock helpers and
tracepoints"). This is for the per CPU lock cgroup_rstat_cpu_lock.
Based on production workloads, we observe the fast-path "update" function
cgroup_rstat_updated() is invoked around 3 million times per sec, while the
"flush" function cgroup_rstat_flush_locked(), walking each possible CPU,
can see periodic spikes of 700 invocations/sec.
For this reason, the tracepoints are split into normal and fastpath
versions for this per-CPU lock. Making it feasible for production to
continuously monitor the non-fastpath tracepoint to detect lock contention
issues. The reason for monitoring is that lock disables IRQs which can
disturb e.g. softirq processing on the local CPUs involved. When the
global cgroup_rstat_lock stops disabling IRQs (e.g converted to a mutex),
this per CPU lock becomes the next bottleneck that can introduce latency
variations.
A practical bpftrace script for monitoring contention latency:
bpftrace -e '
tracepoint:cgroup:cgroup_rstat_cpu_lock_contended {
@start[tid]=nsecs; @cnt[probe]=count()}
tracepoint:cgroup:cgroup_rstat_cpu_locked {
if (args->contended) {
@wait_ns=hist(nsecs-@start[tid]); delete(@start[tid]);}
@cnt[probe]=count()}
interval:s:1 {time("%H:%M:%S "); print(@wait_ns); print(@cnt); clear(@cnt);}'
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The comment here is outdated and can cause confusion, from the code
perspective, there’s also no need for new comment, so just remove it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 8996f93fc3 ("cgroup/cpuset: Statically initialize more
members of top_cpuset") uses an incorrect "<" relational operator for
the CS_SCHED_LOAD_BALANCE bit when initializing the top_cpuset. This
results in load_balancing turned off by default in the top cpuset which
is bad for performance.
Fix this by using the BIT() helper macro to set the desired top_cpuset
flags and avoid similar mistake from being made in the future.
Fixes: 8996f93fc3 ("cgroup/cpuset: Statically initialize more members of top_cpuset")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In cpuset_css_online(), CS_SCHED_LOAD_BALANCE will be cleared twice,
the former one in the is_in_v2_mode() case could be removed because
is_in_v2_mode() can be true for cgroup v1 if the "cpuset_v2_mode"
mount option is specified, that balance flag change isn't appropriate
for this particular case.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Initializing top_cpuset.relax_domain_level and setting
CS_SCHED_LOAD_BALANCE to top_cpuset.flags in cpuset_init() could be
completed at the time of top_cpuset definition by compiler.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
No need to continue the for_each_subsys loop after the token matches the
name of subsys and cgroup_no_v1_mask is set.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently cgroup1_pidlist_destroy_all() will be called when releasing
cgroup even if the cgroup is on default hierarchy, however it doesn't
make any sense for v2 to destroy pidlist of v1.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The freezer->lock was replaced by freezer_mutex in commit e5ced8ebb1
("cgroup_freezer: replace freezer->lock with freezer_mutex"), so the
comment here is out-of-date, update it.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Recent change to cgroup_rstat_flush_release added a
parameter cgrp, which is used by tracepoint to correlate
with other tracepoints that also have this cgrp.
The kernel test robot detected kernel doc was missing
a description of this member.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404170821.HwZGISTY-lkp@intel.com/
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit enhances the ability to troubleshoot the global
cgroup_rstat_lock by introducing wrapper helper functions for the lock
along with associated tracepoints.
Although global, the cgroup_rstat_lock helper APIs and tracepoints take
arguments such as cgroup pointer and cpu_in_loop variable. This
adjustment is made because flushing occurs per cgroup despite the lock
being global. Hence, when troubleshooting, it's important to identify the
relevant cgroup. The cpu_in_loop variable is necessary because the global
lock may be released within the main flushing loop that traverses CPUs.
In the tracepoints, the cpu_in_loop value is set to -1 when acquiring the
main lock; otherwise, it denotes the CPU number processed last.
The new feature in this patchset is detecting when lock is contended. The
tracepoints are implemented with production in mind. For minimum overhead
attach to cgroup:cgroup_rstat_lock_contended, which only gets activated
when trylock detects lock is contended. A quick production check for
issues could be done via this perf commands:
perf record -g -e cgroup:cgroup_rstat_lock_contended
Next natural question would be asking how long time do lock contenders
wait for obtaining the lock. This can be answered by measuring the time
between cgroup:cgroup_rstat_lock_contended and cgroup:cgroup_rstat_locked
when args->contended is set. Like this bpftrace script:
bpftrace -e '
tracepoint:cgroup:cgroup_rstat_lock_contended {@start[tid]=nsecs}
tracepoint:cgroup:cgroup_rstat_locked {
if (args->contended) {
@wait_ns=hist(nsecs-@start[tid]); delete(@start[tid]);}}
interval:s:1 {time("%H:%M:%S "); print(@wait_ns); }'
Extending with time spend holding the lock will be more expensive as this
also looks at all the non-contended cases.
Like this bpftrace script:
bpftrace -e '
tracepoint:cgroup:cgroup_rstat_lock_contended {@start[tid]=nsecs}
tracepoint:cgroup:cgroup_rstat_locked { @locked[tid]=nsecs;
if (args->contended) {
@wait_ns=hist(nsecs-@start[tid]); delete(@start[tid]);}}
tracepoint:cgroup:cgroup_rstat_unlock {
@locked_ns=hist(nsecs-@locked[tid]); delete(@locked[tid]);}
interval:s:1 {time("%H:%M:%S "); print(@wait_ns);print(@locked_ns); }'
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Atomic counters are in kzalloc'd struct. They are zeroed already and
atomic64_t does not need special initialization
(cf kernel/trace/trace_clock.c:trace_counter).
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit 3a5a6d0c2b03("cpuset: don't nest cgroup_mutex inside
get_online_cpus()"), cpuset hotplug was done asynchronously via a work
function. This is to avoid recursive locking of cgroup_mutex.
Since then, the cgroup locking scheme has changed quite a bit. A
cpuset_mutex was introduced to protect cpuset specific operations.
The cpuset_mutex is then replaced by a cpuset_rwsem. With commit
d74b27d63a ("cgroup/cpuset: Change cpuset_rwsem and hotplug lock
order"), cpu_hotplug_lock is acquired before cpuset_rwsem. Later on,
cpuset_rwsem is reverted back to cpuset_mutex. All these locking changes
allow the hotplug code to call into cpuset core directly.
The following commits were also merged due to the asynchronous nature
of cpuset hotplug processing.
- commit b22afcdf04 ("cpu/hotplug: Cure the cpusets trainwreck")
- commit 50e7663233 ("sched/cpuset/pm: Fix cpuset vs. suspend-resume
bugs")
- commit 28b89b9e6f ("cpuset: handle race between CPU hotplug and
cpuset_hotplug_work")
Clean up all these bandages by making cpuset hotplug
processing synchronous again with the exception that the call to
cgroup_transfer_tasks() to transfer tasks out of an empty cgroup v1
cpuset, if necessary, will still be done via a work function due to the
existing cgroup_mutex -> cpu_hotplug_lock dependency. It is possible
to reverse that dependency, but that will require updating a number of
different cgroup controllers. This special hotplug code path should be
rarely taken anyway.
As all the cpuset states will be updated by the end of the hotplug
operation, we can revert most the above commits except commit
50e7663233 ("sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs")
which is partially reverted. Also removing some cpus_read_lock trylock
attempts in the cpuset partition code as they are no longer necessary
since the cpu_hotplug_lock is now held for the whole duration of the
cpuset hotplug code path.
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Core & protocols
----------------
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps etc.)
lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core
instead of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length
and budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global config
variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug
of ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for
use on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code
--------------------------------------------
- Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
- Rework selftest harness to enable the use of the full range of
ksft exit code (pass, fail, skip, xfail, xpass).
Netfilter
---------
- Allow userspace to define a table that is exclusively owned by a daemon
(via netlink socket aliveness) without auto-removing this table when
the userspace program exits. Such table gets marked as orphaned and
a restarting management daemon can re-attach/regain ownership.
- Speed up element insertions to nftables' concatenated-ranges set type.
Compact a few related data structures.
BPF
---
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between BPF
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly
for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects.
Wireless
--------
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API
----------
- Major overhaul of the Energy Efficient Ethernet internals to support
new link modes (2.5GE, 5GE), share more code between drivers
(especially those using phylib), and encourage more uniform behavior.
Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc
----
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions,
and packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message encapsulation
or "Netlink polymorphism", where interpretation of nested attributes
depends on link type, classifier type or some other "class type".
Drivers
-------
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic
on CAN BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO) support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs to
have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=oY52
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
A quiet cycle. One trivial doc update patch. Two patches to drop now defunct
memory_spread_slab feature from cgroup1 cpuset.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZe7MVQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGR59APwO8h/GCRH0KovpemkjsIHxicWMlvfHVleIdS4l
FY7lLgD+JGucXcxd4YM/ZAZkj9pSUvrEm46n+Jrst7GFH8lfUQ0=
=YY0C
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"A quiet cycle. One trivial doc update patch. Two patches to drop the
now defunct memory_spread_slab feature from cgroup1 cpuset"
* tag 'cgroup-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Mark memory_spread_slab as obsolete
cgroup/cpuset: Remove cpuset_do_slab_mem_spread()
docs: cgroup-v1: add missing code-block tags
The update_cpumask(), checks for newly requested cpumask by calling
validate_change(), which returns an error on passing an invalid set
of cpu(s). Independent of the error returned, update_cpumask() always
returns zero, suppressing the error and returning success to the user
on writing an invalid cpu range for a cpuset. Fix it by returning
retval instead, which is returned by validate_change().
Fixes: 99fe36ba6f ("cgroup/cpuset: Improve temporary cpumasks handling")
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
We've removed the SLAB allocator, cpuset_do_slab_mem_spread() and
SLAB_MEM_SPREAD, memory_spread_slab is a no-op now. We can mark
memory_spread_slab as obsolete in case someone still wants to use it after
cpuset_do_slab_mem_spread() removed. For more details, please check [1].
[1] https://lore.kernel.org/lkml/32bc1403-49da-445a-8c00-9686a3b0d6a3@redhat.com/T/#m8e292e21b00f95a4bb8086371fa7387fa4ea8f60
tj: Description and cosmetic updates.
Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix a possible memory leak in update_exclusive_cpumask() by moving the
alloc_cpumasks() down after the validate_change() check which can fail
and still before the temporary cpumasks are needed.
Fixes: e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
Reported-and-tested-by: Mirsad Todorovac <mirsad.todorovac@alu.hr>
Closes: https://lore.kernel.org/lkml/14915689-27a3-4cd8-80d2-9c30d0c768b6@alu.unizg.hr
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v6.7+
This commit marks kfuncs as such inside the .BTF_ids section. The upshot
of these annotations is that we'll be able to automatically generate
kfunc prototypes for downstream users. The process is as follows:
1. In source, use BTF_KFUNCS_START/END macro pair to mark kfuncs
2. During build, pahole injects into BTF a "bpf_kfunc" BTF_DECL_TAG for
each function inside BTF_KFUNCS sets
3. At runtime, vmlinux or module BTF is made available in sysfs
4. At runtime, bpftool (or similar) can look at provided BTF and
generate appropriate prototypes for functions with "bpf_kfunc" tag
To ensure future kfunc are similarly tagged, we now also return error
inside kfunc registration for untagged kfuncs. For vmlinux kfuncs,
we also WARN(), as initcall machinery does not handle errors.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/e55150ceecbf0a5d961e608941165c0bee7bc943.1706491398.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Here are the set of driver core and kernfs changes for 6.8-rc1. Nothing
major in here this release cycle, just lots of small cleanups and some
tweaks on kernfs that in the very end, got reverted and will come back
in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZaeOrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtcwCffzvKKkSY9qAp6+0v2WQNkZm1JWoAoJCPYUwF
If6wEoPLWvRfKx4gIoq9
=D96r
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
- Yafang Shao added task_get_cgroup1() helper to enable a similar BPF helper
so that BPF progs can be more useful on cgroup1 hierarchies. While cgroup1
is mostly in maintenance mode, this addition is very small while having an
outsized usefulness for users who are still on cgroup1. Yafang also
optimized root cgroup list access by making it RCU protected in the
process.
- Waiman Long optimized rstat operation leading to substantially lower and
more consistent lock hold time while flushing the hierarchical statistics.
As the lock can be acquired briefly in various hot paths, this reduction
has cascading benefits.
- Waiman also improved the quality of isolation for cpuset's isolated
partitions. CPUs which are allocated to isolated partitions are now
excluded from running unbound work items and cpu_is_isolated() test which
is used by vmstat and memcg to reduce interference now includes cpuset
isolated CPUs. While it isn't there yet, the hope is eventually reaching
parity with the isolation level provided by the `isolcpus` boot param but
in a dynamic manner.
This involved a couple workqueue patches which were applied directly to
cgroup/for-6.8 rather than ping-ponged through the wq tree. This was
because the wq code change was small and the area is usually very static
and unlikely to cause conflicts. However, luck had it that there was a wq
bug fix in the area during the 6.7 cycle which caused a conflict. The
conflict is contextual but can be a bit confusing to resolve, so there is
one merge from wq/for-6.7-fixes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZYnuJg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGQ5kAP9nMMWqi+R1HeG7+hWROTVjQZ0OM9KRcpZ1TmjF
FNbkJgEAzt+sPnoWwYDTSI7pkNeZ/IM7x1qkkKGvENNtUXrz0Ac=
=PyYN
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Yafang Shao added task_get_cgroup1() helper to enable a similar BPF
helper so that BPF progs can be more useful on cgroup1 hierarchies.
While cgroup1 is mostly in maintenance mode, this addition is very
small while having an outsized usefulness for users who are still on
cgroup1. Yafang also optimized root cgroup list access by making it
RCU protected in the process.
- Waiman Long optimized rstat operation leading to substantially lower
and more consistent lock hold time while flushing the hierarchical
statistics. As the lock can be acquired briefly in various hot paths,
this reduction has cascading benefits.
- Waiman also improved the quality of isolation for cpuset's isolated
partitions. CPUs which are allocated to isolated partitions are now
excluded from running unbound work items and cpu_is_isolated() test
which is used by vmstat and memcg to reduce interference now includes
cpuset isolated CPUs. While it isn't there yet, the hope is
eventually reaching parity with the isolation level provided by the
`isolcpus` boot param but in a dynamic manner.
* tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Move rcu_head up near the top of cgroup_root
cgroup/cpuset: Include isolated cpuset CPUs in cpu_is_isolated() check
cgroup: Avoid false cacheline sharing of read mostly rstat_cpu
cgroup/rstat: Optimize cgroup_rstat_updated_list()
cgroup: Fix documentation for cpu.idle
cgroup/cpuset: Expose cpuset.cpus.isolated
workqueue: Move workqueue_set_unbound_cpumask() and its helpers inside CONFIG_SYSFS
cgroup/rstat: Reduce cpu_lock hold time in cgroup_rstat_flush_locked()
cgroup/cpuset: Take isolated CPUs out of workqueue unbound cpumask
cgroup/cpuset: Keep track of CPUs in isolated partitions
selftests/cgroup: Minor code cleanup and reorganization of test_cpuset_prs.sh
workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask
selftests: cgroup: Fixes a typo in a comment
cgroup: Add a new helper for cgroup1 hierarchy
cgroup: Add annotation for holding namespace_sem in current_cgns_cgroup_from_root()
cgroup: Eliminate the need for cgroup_mutex in proc_cgroup_show()
cgroup: Make operations on the cgroup root_list RCU safe
cgroup: Remove unnecessary list_empty()
One of the last remaining users of strlcpy() in the kernel is
kernfs_path_from_node_locked(), which passes back the problematic "length
we _would_ have copied" return value to indicate truncation. Convert the
chain of all callers to use the negative return value (some of which
already doing this explicitly). All callers were already also checking
for negative return values, so the risk to missed checks looks very low.
In this analysis, it was found that cgroup1_release_agent() actually
didn't handle the "too large" condition, so this is technically also a
bug fix. :)
Here's the chain of callers, and resolution identifying each one as now
handling the correct return value:
kernfs_path_from_node_locked()
kernfs_path_from_node()
pr_cont_kernfs_path()
returns void
kernfs_path()
sysfs_warn_dup()
return value ignored
cgroup_path()
blkg_path()
bfq_bic_update_cgroup()
return value ignored
TRACE_IOCG_PATH()
return value ignored
TRACE_CGROUP_PATH()
return value ignored
perf_event_cgroup()
return value ignored
task_group_path()
return value ignored
damon_sysfs_memcg_path_eq()
return value ignored
get_mm_memcg_path()
return value ignored
lru_gen_seq_show()
return value ignored
cgroup_path_from_kernfs_id()
return value ignored
cgroup_show_path()
already converted "too large" error to negative value
cgroup_path_ns_locked()
cgroup_path_ns()
bpf_iter_cgroup_show_fdinfo()
return value ignored
cgroup1_release_agent()
wasn't checking "too large" error
proc_cgroup_show()
already converted "too large" to negative value
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Waiman Long <longman@redhat.com>
Cc: <cgroups@vger.kernel.org>
Co-developed-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Link: https://lore.kernel.org/r/20231116192127.1558276-3-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231212211741.164376-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By passing the fsugid to kernfs_create_dir_ns(), we don't need
cgroup_kn_set_ugid() any longer. That function was added for exactly
this purpose by commit 49957f8e2a ("cgroup: newly created dirs and
files should be owned by the creator").
Eliminating this piece of duplicate code means we benefit from future
improvements to kernfs_create_dir_ns(); for example, both are lacking
S_ISGID support currently, which my next patch will add to
kernfs_create_dir_ns(). It cannot (easily) be added to
cgroup_kn_set_ugid() because we can't dereference struct kernfs_iattrs
from there.
--
v1 -> v2: 12-digit commit id
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231208093310.297233-1-max.kellermann@ionos.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just one patch.
f5d39b0208 ("freezer,sched: Rewrite core freezer logic") changed how
freezing state is recorded which cgroup_freezing() disagree with the actual
state of the task while thawing triggering a warning. Fix it by updating
cgroup_freezing().
-----BEGIN PGP SIGNATURE-----
iIMEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZXDMtQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGX2kAQDqVMZJ+fq3+nGYZNWdsCP+GtDOjsMf8GaadsMT
e8Iu4QDzBo6QwRyFIA4glPQVWiTh3R35XeN0TCN1qEfCTYEICw==
=F8Zn
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Just one fix.
Commit f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
changed how freezing state is recorded which made cgroup_freezing()
disagree with the actual state of the task while thawing triggering a
warning. Fix it by updating cgroup_freezing()"
* tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup_freezer: cgroup_freezing: Check if not frozen
Currently, the cpu_is_isolated() function checks only the statically
isolated CPUs specified via the "isolcpus" and "nohz_full" kernel
command line options. This function is used by vmstat and memcg to
reduce interference with isolated CPUs by not doing stat flushing
or scheduling works on those CPUs.
Workloads running on isolated CPUs within isolated cpuset
partitions should receive the same treatment to reduce unnecessary
interference. This patch introduces a new cpuset_cpu_is_isolated()
function to be called by cpu_is_isolated() so that the set of dynamically
created cpuset isolated CPUs will be included in the check.
Assuming that testing a bit in a cpumask is atomic, no synchronization
primitive is currently used to synchronize access to the cpuset's
isolated_cpus mask.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The current design of cgroup_rstat_cpu_pop_updated() is to traverse
the updated tree in a way to pop out the leaf nodes first before
their parents. This can cause traversal of multiple nodes before a
leaf node can be found and popped out. IOW, a given node in the tree
can be visited multiple times before the whole operation is done. So
it is not very efficient and the code can be hard to read.
With the introduction of cgroup_rstat_updated_list() to build a list
of cgroups to be flushed first before any flushing operation is being
done, we can optimize the way the updated tree nodes are being popped
by pushing the parents first to the tail end of the list before their
children. In this way, most updated tree nodes will be visited only
once with the exception of the subtree root as we still need to go
back to its parent and popped it out of its updated_children list.
This also makes the code easier to read.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
__thaw_task() was recently updated to warn if the task being thawed was
part of a freezer cgroup that is still currently freezing:
void __thaw_task(struct task_struct *p)
{
...
if (WARN_ON_ONCE(freezing(p)))
goto unlock;
This has exposed a bug in cgroup1 freezing where when CGROUP_FROZEN is
asserted, the CGROUP_FREEZING bits are not also cleared at the same
time. Meaning, when a cgroup is marked FROZEN it continues to be marked
FREEZING as well. This causes the WARNING to trigger, because
cgroup_freezing() thinks the cgroup is still freezing.
There are two ways to fix this:
1. Whenever FROZEN is set, clear FREEZING for the cgroup and all
children cgroups.
2. Update cgroup_freezing() to also verify that FROZEN is not set.
This patch implements option (2), since it's smaller and more
straightforward.
Signed-off-by: Tim Van Patten <timvp@google.com>
Tested-by: Mark Hasemeyer <markhas@chromium.org>
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Tejun Heo <tj@kernel.org>
The root-only cpuset.cpus.isolated control file shows the current set
of isolated CPUs in isolated partitions. This control file is currently
exposed only with the cgroup_debug boot command line option which also
adds the ".__DEBUG__." prefix. This is actually a useful control file if
users want to find out which CPUs are currently in an isolated state by
the cpuset controller. Remove CFTYPE_DEBUG flag for this control file and
make it available by default without any prefix.
The test_cpuset_prs.sh test script and the cgroup-v2.rst documentation
file are also updated accordingly. Minor code change is also made in
test_cpuset_prs.sh to avoid false test failure when running on debug
kernel.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
519fabc7aa ("psi: remove 500ms min window size limitation for
triggers") breaks unprivileged psi polling on cgroups.
Historically, we had a privilege check for polling in the open() of a
pressure file in /proc, but were erroneously missing it for the open()
of cgroup pressure files.
When unprivileged polling was introduced in d82caa2735 ("sched/psi:
Allow unprivileged polling of N*2s period"), it needed to filter
privileges depending on the exact polling parameters, and as such
moved the CAP_SYS_RESOURCE check from the proc open() callback to
psi_trigger_create(). Both the proc files as well as cgroup files go
through this during write(). This implicitly added the missing check
for privileges required for HT polling for cgroups.
When 519fabc7aa ("psi: remove 500ms min window size limitation for
triggers") followed right after to remove further restrictions on the
RT polling window, it incorrectly assumed the cgroup privilege check
was still missing and added it to the cgroup open(), mirroring what we
used to do for proc files in the past.
As a result, unprivileged poll requests that would be supported now
get rejected when opening the cgroup pressure file for writing.
Remove the cgroup open() check. psi_trigger_create() handles it.
Fixes: 519fabc7aa ("psi: remove 500ms min window size limitation for triggers")
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org # 6.5+
Link: https://lore.kernel.org/r/20231026164114.2488682-1-hannes@cmpxchg.org
When cgroup_rstat_updated() isn't being called concurrently with
cgroup_rstat_flush_locked(), its run time is pretty short. When
both are called concurrently, the cgroup_rstat_updated() run time
can spike to a pretty high value due to high cpu_lock hold time in
cgroup_rstat_flush_locked(). This can be problematic if the task calling
cgroup_rstat_updated() is a realtime task running on an isolated CPU
with a strict latency requirement. The cgroup_rstat_updated() call can
happen when there is a page fault even though the task is running in
user space most of the time.
The percpu cpu_lock is used to protect the update tree -
updated_next and updated_children. This protection is only needed when
cgroup_rstat_cpu_pop_updated() is being called. The subsequent flushing
operation which can take a much longer time does not need that protection
as it is already protected by cgroup_rstat_lock.
To reduce the cpu_lock hold time, we need to perform all the
cgroup_rstat_cpu_pop_updated() calls up front with the lock
released afterward before doing any flushing. This patch adds a new
cgroup_rstat_updated_list() function to return a singly linked list of
cgroups to be flushed.
Some instrumentation code are added to measure the cpu_lock hold time
right after lock acquisition to after releasing the lock. Parallel
kernel build on a 2-socket x86-64 server is used as the benchmarking
tool for measuring the lock hold time.
The maximum cpu_lock hold time before and after the patch are 100us and
29us respectively. So the worst case time is reduced to about 30% of
the original. However, there may be some OS or hardware noises like NMI
or SMI in the test system that can worsen the worst case value. Those
noises are usually tuned out in a real production environment to get
a better result.
OTOH, the lock hold time frequency distribution should give a better
idea of the performance benefit of the patch. Below were the frequency
distribution before and after the patch:
Hold time Before patch After patch
--------- ------------ -----------
0-01 us 804,139 13,738,708
01-05 us 9,772,767 1,177,194
05-10 us 4,595,028 4,984
10-15 us 303,481 3,562
15-20 us 78,971 1,314
20-25 us 24,583 18
25-30 us 6,908 12
30-40 us 8,015
40-50 us 2,192
50-60 us 316
60-70 us 43
70-80 us 7
80-90 us 2
>90 us 3
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
To make CPUs in isolated cpuset partition closer in isolation to
the boot time isolated CPUs specified in the "isolcpus" boot command
line option, we need to take those CPUs out of the workqueue unbound
cpumask so that work functions from the unbound workqueues won't run
on those CPUs. Otherwise, they will interfere the user tasks running
on those isolated CPUs.
With the introduction of the workqueue_unbound_exclude_cpumask() helper
function in an earlier commit, those isolated CPUs can now be taken
out from the workqueue unbound cpumask.
This patch also updates cgroup-v2.rst to mention that isolated
CPUs will be excluded from unbound workqueue cpumask as well as
updating test_cpuset_prs.sh to verify the correctness of the new
*cpuset.cpus.isolated file, if available via cgroup_debug option.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a new internal isolated_cpus mask to keep track of the CPUs that are in
isolated partitions. Expose that new cpumask as a new root-only control file
".cpuset.cpus.isolated".
tj: Updated patch description to reflect dropping __DEBUG__ prefix.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp: fix usec timestamps with TCP fastopen
- tcp_sigpool: fix some off by one bugs
- tcp: fix possible out-of-bounds reads in tcp_hash_fail()
- tcp: fix SYN option room calculation for TCP-AO
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=k6Wk
-----END PGP SIGNATURE-----
Merge tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
A new helper is added for cgroup1 hierarchy:
- task_get_cgroup1
Acquires the associated cgroup of a task within a specific cgroup1
hierarchy. The cgroup1 hierarchy is identified by its hierarchy ID.
This helper function is added to facilitate the tracing of tasks within
a particular container or cgroup dir in BPF programs. It's important to
note that this helper is designed specifically for cgroup1 only.
tj: Use irsqsave/restore as suggested by Hou Tao <houtao@huaweicloud.com>.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When I initially examined the function current_cgns_cgroup_from_root(), I
was perplexed by its lack of holding cgroup_mutex. However, after Michal
explained the reason[0] to me, I realized that it already holds the
namespace_sem. I believe this intricacy could also confuse others, so it
would be advisable to include an annotation for clarification.
After we replace the cgroup_mutex with RCU read lock, if current doesn't
hold the namespace_sem, the root cgroup will be NULL. So let's add a
WARN_ON_ONCE() for it.
[0]. https://lore.kernel.org/bpf/afdnpo3jz2ic2ampud7swd6so5carkilts2mkygcaw67vbw6yh@5b5mncf7qyet
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Michal Koutny <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cgroup root_list is already RCU-safe. Therefore, we can replace the
cgroup_mutex with the RCU read lock in some particular paths. This change
will be particularly beneficial for frequent operations, such as
`cat /proc/self/cgroup`, in a cgroup1-based container environment.
I did stress tests with this change, as outlined below
(with CONFIG_PROVE_RCU_LIST enabled):
- Continuously mounting and unmounting named cgroups in some tasks,
for example:
cgrp_name=$1
while true
do
mount -t cgroup -o none,name=$cgrp_name none /$cgrp_name
umount /$cgrp_name
done
- Continuously triggering proc_cgroup_show() in some tasks concurrently,
for example:
while true; do cat /proc/self/cgroup > /dev/null; done
They can ran successfully after implementing this change, with no RCU
warnings in dmesg.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
At present, when we perform operations on the cgroup root_list, we must
hold the cgroup_mutex, which is a relatively heavyweight lock. In reality,
we can make operations on this list RCU-safe, eliminating the need to hold
the cgroup_mutex during traversal. Modifications to the list only occur in
the cgroup root setup and destroy paths, which should be infrequent in a
production environment. In contrast, traversal may occur frequently.
Therefore, making it RCU-safe would be beneficial.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The root hasn't been removed from the root_list, so the list can't be NULL.
However, if it had been removed, attempting to destroy it once more is not
possible. Let's replace this with WARN_ON_ONCE() for clarity.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series "Fixes and cleanups to compaction".
- Joel Fernandes has a patchset ("Optimize mremap during mutual
alignment within PMD") which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested.
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i the
following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series "Do not try to access unaccepted memory" Adrian Hunter
provides some fixups for the recently-added "unaccepted memory' feature.
To increase the feature's checking coverage. "Plug a few gaps where
RAM is exposed without checking if it is unaccepted memory".
- In the series "cleanups for lockless slab shrink" Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code.
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series "use refcount+RCU method to implement
lockless slab shrink".
- David Hildenbrand contributes some maintenance work for the rmap code
in the series "Anon rmap cleanups".
- Kefeng Wang does more folio conversions and some maintenance work in
the migration code. Series "mm: migrate: more folio conversion and
unification".
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series "Add and use bdev_getblk()".
- In the series "Use nth_page() in place of direct struct page
manipulation" Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames.
- In the series "mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO" has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of gigantic
pages are in use.
- Matthew Wilcox has sent the series "Small hugetlb cleanups" - code
rationalization and folio conversions in the hugetlb code.
- Yin Fengwei has improved mlock()'s handling of large folios in the
series "support large folio for mlock"
- In the series "Expose swapcache stat for memcg v1" Liu Shixin has
added statistics for memcg v1 users which are available (and useful)
under memcg v2.
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named "MDWE
without inheritance".
- Kefeng Wang has provided the series "mm: convert numa balancing
functions to use a folio" which does what it says.
- In the series "mm/ksm: add fork-exec support for prctl" Stefan Roesch
makes is possible for a process to propagate KSM treatment across
exec().
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use "high
bandwidth memory" in addition to Optane Data Center Persistent Memory
Modules (DCPMM). The series is named "memory tiering: calculate
abstract distance based on ACPI HMAT"
- In the series "Smart scanning mode for KSM" Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans.
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in the
series "mm: memcg: fix tracking of pending stats updates values".
- In the series "Implement IOCTL to get and optionally clear info about
PTEs" Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits
us to atomically read-then-clear page softdirty state. This is mainly
used by CRIU.
- Hugh Dickins contributed the series "shmem,tmpfs: general maintenance"
- a bunch of relatively minor maintenance tweaks to this code.
- Matthew Wilcox has increased the use of the VMA lock over file-backed
page faults in the series "Handle more faults under the VMA lock". Some
rationalizations of the fault path became possible as a result.
- In the series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()" David Hildenbrand has implemented some cleanups
and folio conversions.
- In the series "various improvements to the GUP interface" Lorenzo
Stoakes has simplified and improved the GUP interface with an eye to
providing groundwork for future improvements.
- Andrey Konovalov has sent along the series "kasan: assorted fixes and
improvements" which does those things.
- Some page allocator maintenance work from Kemeng Shi in the series
"Two minor cleanups to break_down_buddy_pages".
- In thes series "New selftest for mm" Breno Leitao has developed
another MM self test which tickles a race we had between madvise() and
page faults.
- In the series "Add folio_end_read" Matthew Wilcox provides cleanups
and an optimization to the core pagecache code.
- Nhat Pham has added memcg accounting for hugetlb memory in the series
"hugetlb memcg accounting".
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series "Abstract vma_merge() and split_vma()".
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series "Fix page_owner's use of free timestamps".
- Lorenzo Stoakes has fixed the handling of new mappings of sealed files
in the series "permit write-sealed memfd read-only shared mappings".
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series "Batch hugetlb vmemmap modification operations".
- Some buffer_head folio conversions and cleanups from Matthew Wilcox in
the series "Finish the create_empty_buffers() transition".
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the series
"mm: PCP high auto-tuning".
- Roman Gushchin has contributed the patchset "mm: improve performance
of accounted kernel memory allocations" which improves their performance
by ~30% as measured by a micro-benchmark.
- folio conversions from Kefeng Wang in the series "mm: convert page
cpupid functions to folios".
- Some kmemleak fixups in Liu Shixin's series "Some bugfix about
kmemleak".
- Qi Zheng has improved our handling of memoryless nodes by keeping them
off the allocation fallback list. This is done in the series "handle
memoryless nodes more appropriately".
- khugepaged conversions from Vishal Moola in the series "Some
khugepaged folio conversions".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZULEMwAKCRDdBJ7gKXxA
jhQHAQCYpD3g849x69DmHnHWHm/EHQLvQmRMDeYZI+nx/sCJOwEAw4AKg0Oemv9y
FgeUPAD1oasg6CP+INZvCj34waNxwAc=
=E+Y4
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
Not all uses of __diag_ignore_all(...) in BPF-related code in order to
suppress warnings are wrapping kfunc definitions. Some "hook point"
definitions - small functions meant to be used as attach points for
fentry and similar BPF progs - need to suppress -Wmissing-declarations.
We could use __bpf_kfunc_{start,end}_defs added in the previous patch in
such cases, but this might be confusing to someone unfamiliar with BPF
internals. Instead, this patch adds __bpf_hook_{start,end} macros,
currently having the same effect as __bpf_kfunc_{start,end}_defs, then
uses them to suppress warnings for two hook points in the kernel itself
and some bpf_testmod hook points as well.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Core & protocols
----------------
- Support usec resolution of TCP timestamps, enabled selectively by
a route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were created
via the kernel cmdline at boot, rather than via configfs at runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF
---
- Add new veth-like netdevice where BPF program defines the logic
of the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should
never be true but are hard for the verifier to infer.
With some extra flexibility around handling of the exit / failure.
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on
the value for the current CPU. This allows to deprecate local
one-off implementations of per-CPU storage like
BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code
----------------------
- overflow: add DEFINE_FLEX() for on-stack definition of structs
with flexible array members.
- Process doc update with more guidance for reviewers.
Driver API
----------
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring
and querying state of PLL circuits used for clock syntonization,
in network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc
----
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed
-------
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers
-------
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block selection
for IPv6 multicast forwarding and ordering of blocks in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS
to make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=46nS
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
* cpuset now supports remote partitions where CPUs can be reserved for
exclusive use down the tree without requiring all the intermediate nodes
to be partitions. This makes it easier to use partitions without modifying
existing cgroup hierarchy.
* cpuset partition configuration behavior improvement.
* cgroup_favordynmods= boot param added to allow setting the flag on boot on
cgroup1.
* Misc code and doc updates.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZUBUKA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGWfMAP9WP+Z21qzzL2bY5I5kOxu+rD2fF9ORk7azILrI
c3gXSQD/bdxNWcdtrCQMvs+ToNEJvqDFxrmgG5uRUF8Ea+FCtQ8=
=gZj2
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset now supports remote partitions where CPUs can be reserved for
exclusive use down the tree without requiring all the intermediate
nodes to be partitions. This makes it easier to use partitions
without modifying existing cgroup hierarchy.
- cpuset partition configuration behavior improvement
- cgroup_favordynmods= boot param added to allow setting the flag on
boot on cgroup1
- Misc code and doc updates
* tag 'cgroup-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs/cgroup: Add the list of threaded controllers to cgroup-v2.rst
cgroup: use legacy_name for cgroup v1 disable info
cgroup/cpuset: Cleanup signedness issue in cpu_exclusive_check()
cgroup/cpuset: Enable invalid to valid local partition transition
cgroup: add cgroup_favordynmods= command-line option
cgroup/cpuset: Extend test_cpuset_prs.sh to test remote partition
cgroup/cpuset: Documentation update for partition
cgroup/cpuset: Check partition conflict with housekeeping setup
cgroup/cpuset: Introduce remote partition
cgroup/cpuset: Add cpuset.cpus.exclusive for v2
cgroup/cpuset: Add cpuset.cpus.exclusive.effective for v2
cgroup/cpuset: Fix load balance state in update_partition_sd_lb()
cgroup: Avoid extra dereference in css_populate_dir()
cgroup: Check for ret during cgroup1_base_files cft addition
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZTp12QAKCRDbK58LschI
g8BrAQDifqp5liEEdXV8jdReBwJtqInjrL5tzy5LcyHUMQbTaAEA6Ph3Ct3B+3oA
mFnIW/y6UJiJrby0Xz4+vV5BXI/5WQg=
=pLCV
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-26
We've added 51 non-merge commits during the last 10 day(s) which contain
a total of 75 files changed, 5037 insertions(+), 200 deletions(-).
The main changes are:
1) Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF,
from Chuyi Zhou.
2) Fix BPF verifier's iterator convergence logic to use exact states
comparison for convergence checks, from Eduard Zingerman,
Andrii Nakryiko and Alexei Starovoitov.
3) Add BPF programmable net device where bpf_mprog defines the logic
of its xmit routine. It can operate in L3 and L2 mode,
from Daniel Borkmann and Nikolay Aleksandrov.
4) Batch of fixes for BPF per-CPU kptr and re-enable unit_size checking
for global per-CPU allocator, from Hou Tao.
5) Fix libbpf which eagerly assumed that SHT_GNU_verdef ELF section
was going to be present whenever a binary has SHT_GNU_versym section,
from Andrii Nakryiko.
6) Fix BPF ringbuf correctness to fold smp_mb__before_atomic() into
atomic_set_release(), from Paul E. McKenney.
7) Add a warning if NAPI callback missed xdp_do_flush() under
CONFIG_DEBUG_NET which helps checking if drivers were missing
the former, from Sebastian Andrzej Siewior.
8) Fix missed RCU read-lock in bpf_task_under_cgroup() which was throwing
a warning under sleepable programs, from Yafang Shao.
9) Avoid unnecessary -EBUSY from htab_lock_bucket by disabling IRQ before
checking map_locked, from Song Liu.
10) Make BPF CI linked_list failure test more robust,
from Kumar Kartikeya Dwivedi.
11) Enable samples/bpf to be built as PIE in Fedora, from Viktor Malik.
12) Fix xsk starving when multiple xsk sockets were associated with
a single xsk_buff_pool, from Albert Huang.
13) Clarify the signed modulo implementation for the BPF ISA standardization
document that it uses truncated division, from Dave Thaler.
14) Improve BPF verifier's JEQ/JNE branch taken logic to also consider
signed bounds knowledge, from Andrii Nakryiko.
15) Add an option to XDP selftests to use multi-buffer AF_XDP
xdp_hw_metadata and mark used XDP programs as capable to use frags,
from Larysa Zaremba.
16) Fix bpftool's BTF dumper wrt printing a pointer value and another
one to fix struct_ops dump in an array, from Manu Bretelle.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (51 commits)
netkit: Remove explicit active/peer ptr initialization
selftests/bpf: Fix selftests broken by mitigations=off
samples/bpf: Allow building with custom bpftool
samples/bpf: Fix passing LDFLAGS to libbpf
samples/bpf: Allow building with custom CFLAGS/LDFLAGS
bpf: Add more WARN_ON_ONCE checks for mismatched alloc and free
selftests/bpf: Add selftests for netkit
selftests/bpf: Add netlink helper library
bpftool: Extend net dump with netkit progs
bpftool: Implement link show support for netkit
libbpf: Add link-based API for netkit
tools: Sync if_link uapi header
netkit, bpf: Add bpf programmable net device
bpf: Improve JEQ/JNE branch taken logic
bpf: Fold smp_mb__before_atomic() into atomic_set_release()
bpf: Fix unnecessary -EBUSY from htab_lock_bucket
xsk: Avoid starving the xsk further down the list
bpf: print full verifier states on infinite loop detection
selftests/bpf: test if state loops are detected in a tricky case
bpf: correct loop detection for iterators convergence
...
====================
Link: https://lore.kernel.org/r/20231026150509.2824-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch makes some preparations for using css_task_iter_*() in BPF
Program.
1. Flags CSS_TASK_ITER_* are #define-s and it's not easy for bpf prog to
use them. Convert them to enum so bpf prog can take them from vmlinux.h.
2. In the next patch we will add css_task_iter_*() in common kfuncs which
is not safe. Since css_task_iter_*() does spin_unlock_irq() which might
screw up irq flags depending on the context where bpf prog is running.
So we should use irqsave/irqrestore here and the switching is harmless.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231018061746.111364-2-zhouchuyi@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cgroup v1 or v2 or both controller names can be passed as arguments to
the 'cgroup_no_v1' kernel parameter, though most of the controller's
names are the same for both cgroup versions. This can be confusing when
both versions are used interchangeably, i.e., passing cgroup_no_v1=io
$ sudo dmesg |grep cgroup
...
cgroup: Disabling io control group subsystem in v1 mounts
cgroup: Disabled controller 'blkio'
Make it consistent across the pr_info()'s, by using ss->legacy_name, as
the subsystem name, while printing the cgroup v1 controller disabling
information in cgroup_init().
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
One PID may appear multiple times in a preloaded pidlist.
(Possibly due to PID recycling but we have reports of the same
task_struct appearing with different PIDs, thus possibly involving
transfer of PID via de_thread().)
Because v1 seq_file iterator uses PIDs as position, it leads to
a message:
> seq_file: buggy .next function kernfs_seq_next did not update position index
Conservative and quick fix consists of removing duplicates from `tasks`
file (as opposed to removing pidlists altogether). It doesn't affect
correctness (it's sufficient to show a PID once), performance impact
would be hidden by unconditional sorting of the pidlist already in place
(asymptotically).
Link: https://lore.kernel.org/r/20230823174804.23632-1-mkoutny@suse.com/
Suggested-by: Firo Yang <firo.yang@suse.com>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Smatch complains about returning negative error codes from a type
bool function.
kernel/cgroup/cpuset.c:705 cpu_exclusive_check() warn:
signedness bug returning '(-22)'
The code works correctly, but it is confusing. The current behavior is
that cpu_exclusive_check() returns true if it's *NOT* exclusive. Rename
it to cpusets_are_exclusive() and reverse the returns so it returns true
if it is exclusive and false if it's not. Update both callers as well.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309201706.2LhKdM6o-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a local partition becomes invalid, it won't transition back to
valid partition automatically if a proper "cpuset.cpus.exclusive" or
"cpuset.cpus" change is made. Instead, system administrators have to
explicitly echo "root" or "isolated" into the "cpuset.cpus.partition"
file at the partition root.
This patch now enables the automatic transition of an invalid local
partition back to valid when there is a proper "cpuset.cpus.exclusive"
or "cpuset.cpus" change.
Automatic transition of an invalid remote partition to a valid one,
however, is not covered by this patch. They still need an explicit
write to "cpuset.cpus.partition" to become valid again.
The test_cpuset_prs.sh test script is updated to add new test cases to
test this automatic state transition.
Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/lkml/9777f0d2-2fdf-41cb-bd01-19c52939ef42@arm.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We have a need of using favordynmods with cgroup v1, which doesn't support
changing mount flags during remount. Enabling CONFIG_CGROUP_FAVOR_DYNMODS at
build-time is not an option because we want to be able to selectively
enable it for certain systems.
This commit addresses this by introducing the cgroup_favordynmods=
command-line option. This option works for both cgroup v1 and v2 and also
allows for disabling favorynmods when the kernel built with
CONFIG_CGROUP_FAVOR_DYNMODS=y.
Also, note that when cgroup_favordynmods=true favordynmods is never
disabled in cgroup_destroy_root().
Signed-off-by: Luiz Capitulino <luizcap@amazon.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A user can pre-configure certain CPUs in an isolated state at boot time
with the "isolcpus" kernel boot command line option. Those CPUs will
not be in the housekeeping_cpumask(HK_TYPE_DOMAIN) and so will not
be in any sched domains. This may conflict with the partition setup
at runtime. Those boot time isolated CPUs should only be used in an
isolated partition.
This patch adds the necessary check and disallows partition setup if the
check fails.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
One can use "cpuset.cpus.partition" to create multiple scheduling domains
or to produce a set of isolated CPUs where load balancing is disabled.
The former use case is less common but the latter one can be frequently
used especially for the Telco use cases like DPDK.
The existing "isolated" partition can be used to produce isolated
CPUs if the applications have full control of a system. However, in a
containerized environment where all the apps are run in a container,
it is hard to distribute out isolated CPUs from the root down given
the unified hierarchy nature of cgroup v2.
The container running on isolated CPUs can be several layers down from
the root. The current partition feature requires that all the ancestors
of a leaf partition root must be parititon roots themselves. This can
be hard to configure.
This patch introduces a new type of partition called remote partition.
A remote partition is a partition whose parent is not a partition root
itself and its CPUs are acquired directly from available CPUs in the
top cpuset through a hierachical distribution of exclusive CPUs down
from it.
By contrast, the existing type of partitions where their parents have
to be valid partition roots are referred to as local partitions as they
have to be clustered around a parent partition root.
Child local partitons can be created under a remote partition, but
a remote partition cannot be created under a local partition. We may
relax this limitation in the future if there are use cases for such
configuration.
Manually writing to the "cpuset.cpus.exclusive" file is not necessary
when creating local partitions. However, writing proper values to
"cpuset.cpus.exclusive" down the cgroup hierarchy before the target
remote partition root is mandatory for the creation of a remote
partition.
The value in "cpuset.cpus.exclusive.effective" may change if its
"cpuset.cpus" or its parent's "cpuset.cpus.exclusive.effective" changes.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch introduces a new writable "cpuset.cpus.exclusive" control
file for v2 which will be added to non-root cpuset enabled cgroups. This new
file enables user to set a smaller list of exclusive CPUs to be used in
the creation of a cpuset partition.
The value written to "cpuset.cpus.exclusive" may not be the effective
value being used for the creation of cpuset partition, the effective
value will show up in "cpuset.cpus.exclusive.effective" and it is
subject to the constraint that it must also be a subset of cpus_allowed
and parent's "cpuset.cpus.exclusive.effective".
By writing to "cpuset.cpus.exclusive", "cpuset.cpus.exclusive.effective"
may be set to a non-empty value even for cgroups that are not valid
partition roots yet.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The creation of a cpuset partition means dedicating a set of exclusive
CPUs to be used by a particular partition only. These exclusive CPUs
will not be used by any cpusets outside of that partition.
To enable more flexibility in creating partitions, we need a way to
distribute exclusive CPUs that can be used in new partitions. Currently,
we have a subparts_cpus cpumask in struct cpuset that tracks only
the exclusive CPUs used by all the sub-partitions underneath a given
cpuset.
This patch reworks the way we do exclusive CPUs tracking. The
subparts_cpus is now renamed to effective_xcpus which tracks the
exclusive CPUs allocated to a partition root including those that are
further distributed down to sub-partitions underneath it. IOW, it also
includes the exclusive CPUs used by the current partition root. Note
that effective_xcpus can contain offline CPUs and it will always be a
subset of cpus_allowed.
The renamed effective_xcpus is now exposed via a new read-only
"cpuset.cpus.exclusive.effective" control file. The new effective_xcpus
cpumask should be set to cpus_allowed when a cpuset becomes a partition
root and be cleared if it is not a valid partition root.
In the next patch, we will enable write to another new control file to
enable further control of what can get into effective_xcpus.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit a86ce68078 ("cgroup/cpuset: Extract out CS_CPU_EXCLUSIVE
& CS_SCHED_LOAD_BALANCE handling") adds a new helper function
update_partition_sd_lb() to update the load balance state of the
cpuset. However the new load balance is determined by just looking at
whether the cpuset is a valid isolated partition root or not. That is
not enough if the cpuset is not a valid partition root but its parent
is in the isolated state (load balance off). Update the function to
set the new state to be the same as its parent in this case like what
has been done in commit c8c926200c ("cgroup/cpuset: Inherit parent's
load balance state in v2").
Fixes: a86ce68078 ("cgroup/cpuset: Extract out CS_CPU_EXCLUSIVE & CS_SCHED_LOAD_BALANCE handling")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use css directly instead of dereferencing it from &cgroup->self, while
adding the cgroup v2 cft base and psi files in css_populate_dir(). Both
points to the same css, when css->ss is NULL, this avoids extra deferences
and makes code consistent in usage across the function.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There is no check for possible failure while populating
cgroup1_base_files cft in css_populate_dir(), like its cgroup v2 counter
parts cgroup_{base,psi}_files. In case of failure, the cgroup might not
be set up right. Add ret value check to return on failure.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Sudip Mukherjee reports that the mips sb1250_swarm_defconfig build fails
with the current kernel. It isn't actually MIPS-specific, it's just
that that defconfig does not have CGROUP_SCHED enabled like most configs
do, and as such shows this error:
kernel/cgroup/cgroup.c: In function 'cgroup_local_stat_show':
kernel/cgroup/cgroup.c:3699:15: error: implicit declaration of function 'cgroup_tryget_css'; did you mean 'cgroup_tryget'? [-Werror=implicit-function-declaration]
3699 | css = cgroup_tryget_css(cgrp, ss);
| ^~~~~~~~~~~~~~~~~
| cgroup_tryget
kernel/cgroup/cgroup.c:3699:13: warning: assignment to 'struct cgroup_subsys_state *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
3699 | css = cgroup_tryget_css(cgrp, ss);
| ^
because cgroup_tryget_css() only exists when CGROUP_SCHED is enabled,
and the cgroup_local_stat_show() function should similarly be guarded by
that config option.
Move things around a bit to fix this all.
Fixes: d1d4ff5d11 ("cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Per-cpu cpu usage stats are now tracked. This currently isn't printed out
in the cgroupfs interface and can only be accessed through e.g. BPF.
Should decide on a not-too-ugly way to show per-cpu stats in cgroupfs.
* cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be created
below non-partition parents, which should ease the management of partition
cpusets.
* A lot of code and documentation cleanup patches.
* tools/testing/selftests/cgroup/test_cpuset.c is added. This causes trivial
conflicts in .gitignore and Makefile under the directory against
fe3b1bf19b ("selftests: cgroup: add test_zswap program"). They can be
resolved by keeping lines from both branches.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZPENTg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGcyBAP44cHwpSFxXe3cehxAzb1l/2BZXtzU5l48OqUQd
MwHyrwEAm7+MTVAR2xOF4f+oVM9KWmKj7oV7Clpixl1S7hHyjwE=
=FCc9
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Per-cpu cpu usage stats are now tracked
This currently isn't printed out in the cgroupfs interface and can
only be accessed through e.g. BPF. Should decide on a not-too-ugly
way to show per-cpu stats in cgroupfs
- cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be
created below non-partition parents, which should ease the management
of partition cpusets
- A lot of code and documentation cleanup patches
- tools/testing/selftests/cgroup/test_cpuset.c added
* tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (32 commits)
cgroup: Avoid -Wstringop-overflow warnings
cgroup:namespace: Remove unused cgroup_namespaces_init()
cgroup/rstat: Record the cumulative per-cpu time of cgroup and its descendants
cgroup: clean up if condition in cgroup_pidlist_start()
cgroup: fix obsolete function name in cgroup_destroy_locked()
Documentation: cgroup-v2.rst: Correct number of stats entries
cgroup: fix obsolete function name above css_free_rwork_fn()
cgroup/cpuset: fix kernel-doc
cgroup: clean up printk()
cgroup: fix obsolete comment above cgroup_create()
docs: cgroup-v1: fix typo
docs: cgroup-v1: correct the term of Page Cache organization in inode
cgroup/misc: Store atomic64_t reads to u64
cgroup/misc: Change counters to be explicit 64bit types
cgroup/misc: update struct members descriptions
cgroup: remove cgrp->kn check in css_populate_dir()
cgroup: fix obsolete function name
cgroup: use cached local variable parent in for loop
cgroup: remove obsolete comment above struct cgroupstats
cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED
...
Change the notation from pointer-to-array to pointer-to-pointer.
With this, we avoid the compiler complaining about trying
to access a region of size zero as an argument during function
calls.
This is a workaround to prevent the compiler complaining about
accessing an array of size zero when evaluating the arguments
of a couple of function calls. See below:
kernel/cgroup/cgroup.c: In function 'find_css_set':
kernel/cgroup/cgroup.c:1206:16: warning: 'find_existing_css_set' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
1206 | cset = find_existing_css_set(old_cset, cgrp, template);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/cgroup/cgroup.c:1206:16: note: referencing argument 3 of type 'struct cgroup_subsys_state *[0]'
kernel/cgroup/cgroup.c:1071:24: note: in a call to function 'find_existing_css_set'
1071 | static struct css_set *find_existing_css_set(struct css_set *old_cset,
| ^~~~~~~~~~~~~~~~~~~~~
With the change to pointer-to-pointer, the functions are not prevented
from being executed, and they will do what they have to do when
CGROUP_SUBSYS_COUNT == 0.
Address the following -Wstringop-overflow warnings seen when
built with ARM architecture and aspeed_g4_defconfig configuration
(notice that under this configuration CGROUP_SUBSYS_COUNT == 0):
kernel/cgroup/cgroup.c:1208:16: warning: 'find_existing_css_set' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:1258:15: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6089:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6153:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
This results in no differences in binary output.
Link: https://github.com/KSPP/linux/issues/316
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_namspace_init() just return 0. Therefore, there is no need to
call it during start_kernel. Just remove it.
Fixes: a79a908fd2 ("cgroup: introduce cgroup namespaces")
Signed-off-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The member variable bstat of the structure cgroup_rstat_cpu
records the per-cpu time of the cgroup itself, but does not
include the per-cpu time of its descendants. The per-cpu time
including descendants is very useful for calculating the
per-cpu usage of cgroups.
Although we can indirectly obtain the total per-cpu time
of the cgroup and its descendants by accumulating the per-cpu
bstat of each descendant of the cgroup. But after a child cgroup
is removed, we will lose its bstat information. This will cause
the cumulative value to be non-monotonic, thus affecting
the accuracy of cgroup per-cpu usage.
So we add the subtree_bstat variable to record the total
per-cpu time of this cgroup and its descendants, which is
similar to "cpuacct.usage*" in cgroup v1. And this is
also helpful for the migration from cgroup v1 to cgroup v2.
After adding this variable, we can obtain the per-cpu time of
cgroup and its descendants in user mode through eBPF/drgn, etc.
And we are still trying to determine how to expose it in the
cgroupfs interface.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Jia <jiahao.os@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There's no need to use '<=' when knowing 'l->list[mid] != pid' already.
No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit e76ecaeef6 ("cgroup: use cgroup_kn_lock_live() in other
cgroup kernfs methods"), cgroup_kn_lock_live() is used in cgroup kernfs
methods. Update corresponding comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit 8f36aaec9c ("cgroup: Use rcu_work instead of explicit rcu
and work item"), css_free_work_fn has been renamed to css_free_rwork_fn.
Update corresponding comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add kernel-doc of param @rotor to fix warnings:
kernel/cgroup/cpuset.c:4162: warning: Function parameter or member
'rotor' not described in 'cpuset_spread_node'
kernel/cgroup/cpuset.c:3771: warning: Function parameter or member
'work' not described in 'cpuset_hotplug_workfn'
Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Convert the only printk() to use pr_*() helper. No functional change.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit 743210386c ("cgroup: use cgrp->kn->id as the cgroup ID"),
cgrp is associated with its kernfs_node. Update corresponding comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Change 'new_usage' type to u64 so it can be compared with unsigned 'max'
and 'capacity' properly even if the value crosses the signed boundary.
Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
So the variables can account for resources of huge quantities even on
32-bit machines.
Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_create() creates cgrp and assigns the kernfs_node to cgrp->kn,
then cgroup_mkdir() populates base and csses cft file by calling
css_populate_dir() and cgroup_apply_control_enable() with a valid
cgrp->kn. Check for NULL cgrp->kn, will always be false, remove it.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_taskset_migrate() has been renamed to cgroup_migrate_execute() since
commit e595cd7069 ("cgroup: track migration context in cgroup_mgctx").
Update the corresponding comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use local variable parent to initialize iter tcgrp in for loop so the size
of cgroup.o can be reduced by 64 bytes. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We currently export the total throttled time for cgroups that are given
a bandwidth limit. This patch extends this accounting to also account
the total time that each children cgroup has been throttled.
This is useful to understand the degree to which children have been
affected by the throttling control. Children which are not runnable
during the entire throttled period, for example, will not show any
self-throttling time during this period.
Expose this in a new interface, 'cpu.stat.local', which is similar to
how non-hierarchical events are accounted in 'memory.events.local'.
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230620183247.737942-2-joshdon@google.com
Put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED to fix the warning
of 'cgroup_tryget_css' defined but not used [-Wunused-function] when
CONFIG_CGROUP_SCHED is disabled.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A single partition setup and tear-down operation can lead to
multiple rebuild_sched_domains_locked() calls which is a waste of
effort. This can partly be mitigated by adding a flag to suppress the
rebuild_sched_domains_locked() call in update_cpumasks_hier(). Since
a Boolean flag has already been passed as the 3rd argument to
update_cpumasks_hier(), we can extend that to a full flag word.
The sched domain rebuild suppression is now enabled in
update_sibling_cpumasks() as all it callers will do the sched domain
rebuild after its return later on anyway.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The limitation that update_parent_subparts_cpumask() can only use
addmask & delmask in the given tmp cpumasks is fragile and may lead to
unexpected error.
Fix this problem by allocating/freeing a struct tmpmasks in
update_cpumask() to avoid reusing the cpumasks in trial_cs.
With this change, we can move the update_tasks_cpumask() for the
parent and update_sibling_cpumasks() for the sibling to inside
update_parent_subparts_cpumask().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Extract out the setting of CS_CPU_EXCLUSIVE and CS_SCHED_LOAD_BALANCE
flags as well as the rebuilding of scheduling domains into the new
update_partition_exclusive() and update_partition_sd_lb() helper
functions to simplify the logic. The update_partition_exclusive()
helper is called mainly at the beginning of the caller, but it may be
called at the end too. The update_partition_sd_lb() helper is called
at the end of the caller.
This patch should reduce the chance that cpuset partition will end up
in an incorrect state.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit f28e22441f ("cgroup/cpuset: Add a new isolated
cpus.partition type"), the CS_SCHED_LOAD_BALANCE bit of a v2 cpuset
can be on or off. The child cpusets of a partition root must have the
same setting as its parent or it may screw up the rebuilding of sched
domains. Fix this problem by making sure the a child v2 cpuset will
follows its parent cpuset load balance state unless the child cpuset
is a new partition root itself.
Fixes: f28e22441f ("cgroup/cpuset: Add a new isolated cpus.partition type")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When we migrate a task between two cgroups, one of the checks is a
verification whether we can modify task's scheduler settings
(cap_task_setscheduler()).
An implicit migration occurs also when enabling a controller on the
unified hierarchy (think of parent to child migration). The
aforementioned check may be problematic if the caller of the migration
(enabling a controller) has no permissions over migrated tasks.
For instance, a user's cgroup that ends up running a process of a
different user. Although cgroup permissions are configured favorably,
the enablement fails due to the foreign process [1].
Change the behavior by relaxing the permissions check on the unified
hierarchy when no effective change would happen.
This is in accordance with unified hierarchy attachment behavior when
permissions of the source to target cgroups are decisive whereas the
migrated task is opaque (as opposed to more restrictive check in
__cgroup1_procs_write()).
Notice that foreign task's affinity may still be modified if the user
can modify destination cgroup's cpuset attributes
(update_tasks_cpumask() does no permissions check). The permissions
check could thus be skipped on v2 even when affinity changes. Stay
conservative in this patch though.
[1] https://github.com/systemd/systemd/issues/18293#issuecomment-831205649
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
cpuset_mutex unlock and lock pair is only needed when transferring tasks
out of empty cpuset. Avoid unneeded cpuset_mutex re-lock when !is_empty
to save cpu cycles.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
kthread_is_per_cpu() can be called directly without checking whether
PF_KTHREAD is set in task->flags. So remove PF_KTHREAD check to make
code more concise.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Make it under CONFIG_CGROUP_SCHED to rid of __maybe_unused annotation.
And further fetch cgrp inside cgroup_extra_stat_show() directly to rid
of __maybe_unused annotation of cgrp. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The return value of cgroup_rm_cftypes_locked() is always 0. So remove
it to simplify the code. No functional change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Destroying psi trigger in cgroup_file_release causes UAF issues when
a cgroup is removed from under a polling process. This is happening
because cgroup removal causes a call to cgroup_file_release while the
actual file is still alive. Destroying the trigger at this point would
also destroy its waitqueue head and if there is still a polling process
on that file accessing the waitqueue, it will step on the freed pointer:
do_select
vfs_poll
do_rmdir
cgroup_rmdir
kernfs_drain_open_files
cgroup_file_release
cgroup_pressure_release
psi_trigger_destroy
wake_up_pollfree(&t->event_wait)
// vfs_poll is unblocked
synchronize_rcu
kfree(t)
poll_freewait -> UAF access to the trigger's waitqueue head
Patch [1] fixed this issue for epoll() case using wake_up_pollfree(),
however the same issue exists for synchronous poll() case.
The root cause of this issue is that the lifecycles of the psi trigger's
waitqueue and of the file associated with the trigger are different. Fix
this by using kernfs_generic_poll function when polling on cgroup-specific
psi triggers. It internally uses kernfs_open_node->poll waitqueue head
with its lifecycle tied to the file's lifecycle. This also renders the
fix in [1] obsolete, so revert it.
[1] commit c2dbe32d5d ("sched/psi: Fix use-after-free in ep_remove_wait_queue()")
Fixes: 0e94682b73 ("psi: introduce psi monitor")
Closes: https://lore.kernel.org/all/20230613062306.101831-1-lujialin4@huawei.com/
Reported-by: Lu Jialin <lujialin4@huawei.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230630005612.1014540-1-surenb@google.com
- Yosry has also eliminated cgroup's atomic rstat flushing.
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability.
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning.
- Lorenzo Stoakes has done some maintanance work on the get_user_pages()
interface.
- Liam Howlett continues with cleanups and maintenance work to the maple
tree code. Peng Zhang also does some work on maple tree.
- Johannes Weiner has done some cleanup work on the compaction code.
- David Hildenbrand has contributed additional selftests for
get_user_pages().
- Thomas Gleixner has contributed some maintenance and optimization work
for the vmalloc code.
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code.
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting.
- Christoph Hellwig has some cleanups for the filemap/directio code.
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the provided
APIs rather than open-coding accesses.
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings.
- John Hubbard has a series of fixes to the MM selftesting code.
- ZhangPeng continues the folio conversion campaign.
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock.
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from
128 to 8.
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management.
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code.
- Vishal Moola also has done some folio conversion work.
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZJejewAKCRDdBJ7gKXxA
joggAPwKMfT9lvDBEUnJagY7dbDPky1cSYZdJKxxM2cApGa42gEA6Cl8HRAWqSOh
J0qXCzqaaN8+BuEyLGDVPaXur9KirwY=
=B7yQ
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
* Whenever cpuset needs to rebuild sched_domain, it walked all tasks looking
for DEADLINE tasks as they need to be accounted on the new domain. Walking
all tasks can be expensive and there may not be any DEADLINE tasks at all.
Task iteration is now omitted if there are no DEADLINE tasks.
* Fixes DEADLINE bandwidth misaccounting after task migration failures.
* When no controller is enabled, -Wstringop-overflow warning is triggered.
The fix patch added an early exit which is too eager and got reverted for
now. Will fix later.
* Everything else are minor cleanups.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZJoRHw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGZatAQCKTv8pb5HEgochph4n26laSdVZs6ce3Y+s7V1T
rum+3QD/TyJFmCkZSMscolZGFuafpg41sjPbmc4SexeuAMYCMgY=
=nioD
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Whenever cpuset needs to rebuild sched_domain, it walked all tasks
looking for DEADLINE tasks as they need to be accounted on the new
domain. Walking all tasks can be expensive and there may not be any
DEADLINE tasks at all. Task iteration is now omitted if there are no
DEADLINE tasks
- Fixes DEADLINE bandwidth misaccounting after task migration failures
- When no controller is enabled, -Wstringop-overflow warning is
triggered. The fix patch added an early exit which is too eager and
got reverted for now. Will fix later
- Everything else is minor cleanups
* tag 'cgroup-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Revert "cgroup: Avoid -Wstringop-overflow warnings"
cgroup/misc: Expose misc.current on cgroup v2 root
cgroup: Avoid -Wstringop-overflow warnings
cgroup: remove obsolete comment on cgroup_on_dfl()
cgroup: remove unused task_cgroup_path()
cgroup/cpuset: remove unneeded header files
cgroup: make cgroup_is_threaded() and cgroup_is_thread_root() static
rdmacg: fix kernel-doc warnings in rdmacg
cgroup: Replace the css_set call with cgroup_get
cgroup: remove unused macro for_each_e_css()
cgroup: Update out-of-date comment in cgroup_migrate()
cgroup: Replace all non-returning strlcpy with strscpy
cgroup/cpuset: remove unneeded header files
cgroup/cpuset: Free DL BW in case can_attach() fails
sched/deadline: Create DL BW alloc, free & check overflow interface
cgroup/cpuset: Iterate only if DEADLINE tasks are present
sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets
sched/cpuset: Bring back cpuset_mutex
cgroup/cpuset: Rename functions dealing with DEADLINE accounting
- Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of higher-frequency
SMT cores and lower-frequency non-SMT cores), under the old code
lower-priority CPUs pulled tasks from the higher-priority cores if
more than one SMT sibling was busy - resulting in many unnecessary
task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores with more
than one busy sibling and allows lower-priority CPUs to pull tasks, which
avoids superfluous migrations and lets lower-priority cores inspect all SMT
siblings for the busiest queue.
- Implement the 'runnable boosting' feature in the EAS balancer: consider CPU
contention in frequency, EAS max util & load-balance busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves other key
workloads unchanged.
- Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it
into the build_sched_topology() helper function and building
it dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
- Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations.
- Fix task_struct::saved_state handling.
- Fix various rq clock update bugs, unearthed by turning on the rq clock
debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger by
creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
- Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation
to (maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EWQA
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler SMP load-balancer improvements:
- Avoid unnecessary migrations within SMT domains on hybrid systems.
Problem:
On hybrid CPU systems, (processors with a mixture of
higher-frequency SMT cores and lower-frequency non-SMT cores),
under the old code lower-priority CPUs pulled tasks from the
higher-priority cores if more than one SMT sibling was busy -
resulting in many unnecessary task migrations.
Solution:
The new code improves the load balancer to recognize SMT cores
with more than one busy sibling and allows lower-priority CPUs
to pull tasks, which avoids superfluous migrations and lets
lower-priority cores inspect all SMT siblings for the busiest
queue.
- Implement the 'runnable boosting' feature in the EAS balancer:
consider CPU contention in frequency, EAS max util & load-balance
busiest CPU selection.
This improves CPU utilization for certain workloads, while leaves
other key workloads unchanged.
Scheduler infrastructure improvements:
- Rewrite the scheduler topology setup code by consolidating it into
the build_sched_topology() helper function and building it
dynamically on the fly.
- Resolve the local_clock() vs. noinstr complications by rewriting
the code: provide separate sched_clock_noinstr() and
local_clock_noinstr() functions to be used in instrumentation code,
and make sure it is all instrumentation-safe.
Fixes:
- Fix a kthread_park() race with wait_woken()
- Fix misc wait_task_inactive() bugs unearthed by the -rt merge:
- Fix UP PREEMPT bug by unifying the SMP and UP implementations
- Fix task_struct::saved_state handling
- Fix various rq clock update bugs, unearthed by turning on the rq
clock debugging code.
- Fix the PSI WINDOW_MIN_US trigger limit, which was easy to trigger
by creating enough cgroups, by removing the warnign and restricting
window size triggers to PSI file write-permission or
CAP_SYS_RESOURCE.
- Propagate SMT flags in the topology when removing degenerate domain
- Fix grub_reclaim() calculation bug in the deadline scheduler code
- Avoid resetting the min update period when it is unnecessary, in
psi_trigger_destroy().
- Don't balance a task to its current running CPU in load_balance(),
which was possible on certain NUMA topologies with overlapping
groups.
- Fix the sched-debug printing of rq->nr_uninterruptible
Cleanups:
- Address various -Wmissing-prototype warnings, as a preparation to
(maybe) enable this warning in the future.
- Remove unused code
- Mark more functions __init
- Fix shadow-variable warnings"
* tag 'sched-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/core: Avoid multiple calling update_rq_clock() in __cfsb_csd_unthrottle()
sched/core: Avoid double calling update_rq_clock() in __balance_push_cpu_stop()
sched/core: Fixed missing rq clock update before calling set_rq_offline()
sched/deadline: Update GRUB description in the documentation
sched/deadline: Fix bandwidth reclaim equation in GRUB
sched/wait: Fix a kthread_park race with wait_woken()
sched/topology: Mark set_sched_topology() __init
sched/fair: Rename variable cpu_util eff_util
arm64/arch_timer: Fix MMIO byteswap
sched/fair, cpufreq: Introduce 'runnable boosting'
sched/fair: Refactor CPU utilization functions
cpuidle: Use local_clock_noinstr()
sched/clock: Provide local_clock_noinstr()
x86/tsc: Provide sched_clock_noinstr()
clocksource: hyper-v: Provide noinstr sched_clock()
clocksource: hyper-v: Adjust hv_read_tsc_page_tsc() to avoid special casing U64_MAX
x86/vdso: Fix gettimeofday masking
math64: Always inline u128 version of mul_u64_u64_shr()
s390/time: Provide sched_clock_noinstr()
loongarch: Provide noinstr sched_clock_read()
...
This reverts commit 36de5f303c.
The commit caused boot failures on some configurations due to cgroup
hierarchies not being created at all.
Signed-off-by: Tejun Heo <tj@kernel.org>
Hello,
This patch is to expose misc.current on cgroup v2 root for tracking
how much of the resource has been consumed in total on the system.
Most of the cloud infrastucture use cgroup to fetch the host
information for scheduling purpose.
Currently, the misc controller can be used by Intel TDX HKIDs and
AMD SEV ASIDs, which are both used for creating encrypted VMs.
Intel TDX and AMD SEV are mostly be used by the cloud providers
for providing confidential VMs.
In actual use of a server, these confidential VMs may be launched
in different ways. For the cloud solution, there are kubvirt and
coco (tracked by kubepods.slice); on host, they can be booted
directly through qemu by end user (tracked by user.slice), etc.
In this complex environment, when wanting to know how many resource
is used in total it has to iterate through all existing slices to
get the value of each misc.current and add them up to calculate
the total number of consumed keys.
So exposing misc.current to root cgroup tends to give much easier
when calculates how much resource has been used in total, which
helps to schedule and count resources for the cloud infrastucture.
Signed-off-by: LeiZhou-97 <lei.zhou@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Address the following -Wstringop-overflow warnings seen when
built with ARM architecture and aspeed_g4_defconfig configuration
(notice that under this configuration CGROUP_SUBSYS_COUNT == 0):
kernel/cgroup/cgroup.c:1208:16: warning: 'find_existing_css_set' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:1258:15: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6089:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
kernel/cgroup/cgroup.c:6153:18: warning: 'css_set_hash' accessing 4 bytes in a region of size 0 [-Wstringop-overflow=]
These changes are based on commit d20d30ebb1 ("cgroup: Avoid compiler
warnings with no subsystems").
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The debug feature is supported since commit 8cc38fa7fa ("cgroup: make
debug an implicit controller on cgroup2"), update corresponding comment.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We found a refcount UAF bug as follows:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 342 at lib/refcount.c:25 refcount_warn_saturate+0xa0/0x148
Workqueue: events cpuset_hotplug_workfn
Call trace:
refcount_warn_saturate+0xa0/0x148
__refcount_add.constprop.0+0x5c/0x80
css_task_iter_advance_css_set+0xd8/0x210
css_task_iter_advance+0xa8/0x120
css_task_iter_next+0x94/0x158
update_tasks_root_domain+0x58/0x98
rebuild_root_domains+0xa0/0x1b0
rebuild_sched_domains_locked+0x144/0x188
cpuset_hotplug_workfn+0x138/0x5a0
process_one_work+0x1e8/0x448
worker_thread+0x228/0x3e0
kthread+0xe0/0xf0
ret_from_fork+0x10/0x20
then a kernel panic will be triggered as below:
Unable to handle kernel paging request at virtual address 00000000c0000010
Call trace:
cgroup_apply_control_disable+0xa4/0x16c
rebind_subsystems+0x224/0x590
cgroup_destroy_root+0x64/0x2e0
css_free_rwork_fn+0x198/0x2a0
process_one_work+0x1d4/0x4bc
worker_thread+0x158/0x410
kthread+0x108/0x13c
ret_from_fork+0x10/0x18
The race that cause this bug can be shown as below:
(hotplug cpu) | (umount cpuset)
mutex_lock(&cpuset_mutex) | mutex_lock(&cgroup_mutex)
cpuset_hotplug_workfn |
rebuild_root_domains | rebind_subsystems
update_tasks_root_domain | spin_lock_irq(&css_set_lock)
css_task_iter_start | list_move_tail(&cset->e_cset_node[ss->id]
while(css_task_iter_next) | &dcgrp->e_csets[ss->id]);
css_task_iter_end | spin_unlock_irq(&css_set_lock)
mutex_unlock(&cpuset_mutex) | mutex_unlock(&cgroup_mutex)
Inside css_task_iter_start/next/end, css_set_lock is hold and then
released, so when iterating task(left side), the css_set may be moved to
another list(right side), then it->cset_head points to the old list head
and it->cset_pos->next points to the head node of new list, which can't
be used as struct css_set.
To fix this issue, switch from all css_sets to only scgrp's css_sets to
patch in-flight iterators to preserve correct iteration, and then
update it->cset_head as well.
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://www.spinics.net/lists/cgroups/msg37935.html
Suggested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/all/20230526114139.70274-1-xiujianfeng@huaweicloud.com/
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Fixes: 2d8f243a5e ("cgroup: implement cgroup->e_csets[]")
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Tejun Heo <tj@kernel.org>
syzbot is again reporting circular locking dependency between
cpu_hotplug_lock and freezer_mutex. Do like what we did with
commit 57dcd64c7e ("cgroup,freezer: hold cpu_hotplug_lock
before freezer_mutex").
Reported-by: syzbot <syzbot+2ab700fe1829880a2ec6@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=2ab700fe1829880a2ec6
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+2ab700fe1829880a2ec6@syzkaller.appspotmail.com>
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Tejun Heo <tj@kernel.org>
Previous patches removed the only caller of cgroup_rstat_flush_atomic().
Remove the function and simplify the code.
Link: https://lkml.kernel.org/r/20230421174020.2994750-6-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix all kernel-doc warnings in rdmacg:
kernel/cgroup/rdma.c:209: warning: Function parameter or member 'cg'
not described in 'rdmacg_uncharge_hierarchy'
kernel/cgroup/rdma.c:230: warning: Function parameter or member 'cg'
not described in 'rdmacg_uncharge'
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
We will release the refcnt of cgroup via cgroup_put, for example
in the cgroup_lock_and_drain_offline function, so replace css_get
with the cgroup_get function for better readability.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
for_each_e_css() is unused now. Remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 674b745e22 ("cgroup: remove rcu_read_lock()/rcu_read_unlock()
in critical section of spin_lock_irq()") has removed the rcu_read_lock,
which makes the comment out-of-date, so update it.
tj: Updated the comment a bit.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
A successful call to cgroup_css_set_fork() will always have taken
a ref on kargs->cset (regardless of CLONE_INTO_CGROUP), so always
do a corresponding put in cgroup_css_set_put_fork().
Without this, a cset and its contained css structures will be
leaked for some fork failures. The following script reproduces
the leak for a fork failure due to exceeding pids.max in the
pids controller. A similar thing can happen if we jump to the
bad_fork_cancel_cgroup label in copy_process().
[ -z "$1" ] && echo "Usage $0 pids-root" && exit 1
PID_ROOT=$1
CGROUP=$PID_ROOT/foo
[ -e $CGROUP ] && rmdir -f $CGROUP
mkdir $CGROUP
echo 5 > $CGROUP/pids.max
echo $$ > $CGROUP/cgroup.procs
fork_bomb()
{
set -e
for i in $(seq 10); do
/bin/sleep 3600 &
done
}
(fork_bomb) &
wait
echo $$ > $PID_ROOT/cgroup.procs
kill $(cat $CGROUP/cgroup.procs)
rmdir $CGROUP
Fixes: ef2c41cf38 ("clone3: allow spawning processes into cgroups")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89
Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The commit 4f7e723643 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock()
deadlock") fixed the deadlock between cgroup_threadgroup_rwsem and
cpus_read_lock() by introducing cgroup_attach_{lock,unlock}() and removing
cpus_read_{lock,unlock}() from cpuset_attach(). But cgroup_transfer_tasks()
was missed and not handled, which will cause th following warning:
WARNING: CPU: 0 PID: 589 at kernel/cpu.c:526 lockdep_assert_cpus_held+0x32/0x40
CPU: 0 PID: 589 Comm: kworker/1:4 Not tainted 6.4.0-rc2-next-20230517 #50
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Workqueue: events cpuset_hotplug_workfn
RIP: 0010:lockdep_assert_cpus_held+0x32/0x40
<...>
Call Trace:
<TASK>
cpuset_attach+0x40/0x240
cgroup_migrate_execute+0x452/0x5e0
? _raw_spin_unlock_irq+0x28/0x40
cgroup_transfer_tasks+0x1f3/0x360
? find_held_lock+0x32/0x90
? cpuset_hotplug_workfn+0xc81/0xed0
cpuset_hotplug_workfn+0xcb1/0xed0
? process_one_work+0x248/0x5b0
process_one_work+0x2b9/0x5b0
worker_thread+0x56/0x3b0
? process_one_work+0x5b0/0x5b0
kthread+0xf1/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
So just use the cgroup_attach_{lock,unlock}() helper to fix it.
Reported-by: Zhao Gongyi <zhaogongyi@bytedance.com>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Fixes: 05c7b7a92c ("cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Tejun Heo <tj@kernel.org>
cpuset_can_attach() can fail. Postpone DL BW allocation until all tasks
have been checked. DL BW is not allocated per-task but as a sum over
all DL tasks migrating.
If multiple controllers are attached to the cgroup next to the cpuset
controller a non-cpuset can_attach() can fail. In this case free DL BW
in cpuset_cancel_attach().
Finally, update cpuset DL task count (nr_deadline_tasks) only in
cpuset_attach().
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
update_tasks_root_domain currently iterates over all tasks even if no
DEADLINE task is present on the cpuset/root domain for which bandwidth
accounting is being rebuilt. This has been reported to introduce 10+ ms
delays on suspend-resume operations.
Skip the costly iteration for cpusets that don't contain DEADLINE tasks.
Reported-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Qais reported that iterating over all tasks when rebuilding root domains
for finding out which ones are DEADLINE and need their bandwidth
correctly restored on such root domains can be a costly operation (10+
ms delays on suspend-resume).
To fix the problem keep track of the number of DEADLINE tasks belonging
to each cpuset and then use this information (followup patch) to only
perform the above iteration if DEADLINE tasks are actually present in
the cpuset for which a corresponding root domain is being rebuilt.
Reported-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Turns out percpu_cpuset_rwsem - commit 1243dc518c ("cgroup/cpuset:
Convert cpuset_mutex to percpu_rwsem") - wasn't such a brilliant idea,
as it has been reported to cause slowdowns in workloads that need to
change cpuset configuration frequently and it is also not implementing
priority inheritance (which causes troubles with realtime workloads).
Convert percpu_cpuset_rwsem back to regular cpuset_mutex. Also grab it
only for SCHED_DEADLINE tasks (other policies don't care about stable
cpusets anyway).
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
rebuild_root_domains() and update_tasks_root_domain() have neutral
names, but actually deal with DEADLINE bandwidth accounting.
Rename them to use 'dl_' prefix so that intent is more clear.
No functional change.
Suggested-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Current 500ms min window size for psi triggers limits polling interval
to 50ms to prevent polling threads from using too much cpu bandwidth by
polling too frequently. However the number of cgroups with triggers is
unlimited, so this protection can be defeated by creating multiple
cgroups with psi triggers (triggers in each cgroup are served by a single
"psimon" kernel thread).
Instead of limiting min polling period, which also limits the latency of
psi events, it's better to limit psi trigger creation to authorized users
only, like we do for system-wide psi triggers (/proc/pressure/* files can
be written only by processes with CAP_SYS_RESOURCE capability). This also
makes access rules for cgroup psi files consistent with system-wide ones.
Add a CAP_SYS_RESOURCE capability check for cgroup psi file writers and
remove the psi window min size limitation.
Suggested-by: Sudarshan Rajagopalan <quic_sudaraja@quicinc.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/all/cover.1676067791.git.quic_sudaraja@quicinc.com/
* cpuset changes including the fix for an incorrect interaction with CPU
hotplug and an optimization.
* Other doc and cosmetic changes.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZErfng4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGVVtAQCDycK4VSgc4nsFPG1vh1Oy1A723ciEUwAbKmV/
F1n7xwEA68FiDvE29LpMJJuYP9HnX0A5zRMyNnb52kN9jmgcEQI=
=ALol
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes including the fix for an incorrect interaction with
CPU hotplug and an optimization
- Other doc and cosmetic changes
* tag 'cgroup-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1/cpusets: update libcgroup project link
cgroup/cpuset: Minor updates to test_cpuset_prs.sh
cgroup/cpuset: Include offline CPUs when tasks' cpumasks in top_cpuset are updated
cgroup/cpuset: Skip task update if hotplug doesn't affect current cpuset
cpuset: Clean up cpuset_node_allowed
cgroup: bpf: use cgroup_lock()/cgroup_unlock() wrappers
- Allow unprivileged PSI poll()ing
- Fix performance regression introduced by mm_cid
- Improve livepatch stalls by adding livepatch task switching to cond_resched(),
this resolves livepatching busy-loop stalls with certain CPU-bound kthreads.
- Improve sched_move_task() performance on autogroup configs.
- On core-scheduling CPUs, avoid selecting throttled tasks to run
- Misc cleanups, fixes and improvements.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Hgci
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Allow unprivileged PSI poll()ing
- Fix performance regression introduced by mm_cid
- Improve livepatch stalls by adding livepatch task switching to
cond_resched(). This resolves livepatching busy-loop stalls with
certain CPU-bound kthreads
- Improve sched_move_task() performance on autogroup configs
- On core-scheduling CPUs, avoid selecting throttled tasks to run
- Misc cleanups, fixes and improvements
* tag 'sched-core-2023-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/clock: Fix local_clock() before sched_clock_init()
sched/rt: Fix bad task migration for rt tasks
sched: Fix performance regression introduced by mm_cid
sched/core: Make sched_dynamic_mutex static
sched/psi: Allow unprivileged polling of N*2s period
sched/psi: Extract update_triggers side effect
sched/psi: Rename existing poll members in preparation
sched/psi: Rearrange polling code in preparation
sched/fair: Fix inaccurate tally of ttwu_move_affine
vhost: Fix livepatch timeouts in vhost_worker()
livepatch,sched: Add livepatch task switching to cond_resched()
livepatch: Skip task_call_func() for current task
livepatch: Convert stack entries array to percpu
sched: Interleave cfs bandwidth timers for improved single thread performance at low utilization
sched/core: Reduce cost of sched_move_task when config autogroup
sched/core: Avoid selecting the task that is throttled to run when core-sched enable
sched/topology: Make sched_energy_mutex,update static
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page().
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather
than exclusive, and has fixed a bunch of errors which were caused by its
unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZEr3zQAKCRDdBJ7gKXxA
jlLoAP0fpQBipwFxED0Us4SKQfupV6z4caXNJGPeay7Aj11/kQD/aMRC2uPfgr96
eMG3kwn2pqkB9ST2QpkaRbxA//eMbQY=
=J+Dj
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
Core
----
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances.
- Reduce compound page head access for zero-copy data transfers.
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible.
- Threaded NAPI improvements, adding defer skb free support and unneeded
softirq avoidance.
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking.
- Add lockless accesses annotation to sk_err[_soft].
- Optimize again the skb struct layout.
- Extends the skb drop reasons to make it usable by multiple
subsystems.
- Better const qualifier awareness for socket casts.
BPF
---
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and variable-sized
accesses.
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward.
- Add more precise memory usage reporting for all BPF map types.
- Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params.
- Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton.
- Bigger batch of BPF verifier improvements to prepare for upcoming BPF
open-coded iterators allowing for less restrictive looping capabilities.
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF
programs to NULL-check before passing such pointers into kfunc.
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in
local storage maps.
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps.
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree.
- Add BPF verifier support for ST instructions in convert_ctx_access()
which will help new -mcpu=v4 clang flag to start emitting them.
- Add ARM32 USDT support to libbpf.
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations.
Protocols
---------
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address.
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition.
- Add the handshake upcall mechanism, allowing the user-space
to implement generic TLS handshake on kernel's behalf.
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures.
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers.
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction.
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore.
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter
---------
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged.
- Update bridge netfilter and ovs conntrack helpers to handle
IPv6 Jumbo packets properly, i.e. fetch the packet length
from hop-by-hop extension header. This is needed for BIT TCP
support.
- The iptables 32bit compat interface isn't compiled in by default
anymore.
- Move ip(6)tables builtin icmp matches to the udptcp one.
This has the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used.
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device.
Driver API
----------
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time.
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them.
- Allow the page_pool to directly recycle the pages from safely
localized NAPI.
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization.
- Add YNL support for user headers and struct attrs.
- Add partial YNL specification for devlink.
- Add partial YNL specification for ethtool.
- Add tc-mqprio and tc-taprio support for preemptible traffic classes.
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device.
- Add basic LED support for switch/phy.
- Add NAPI documentation, stop relaying on external links.
- Convert dsa_master_ioctl() to netdev notifier. This is a preparatory
work to make the hardware timestamping layer selectable by user
space.
- Add transceiver support and improve the error messages for CAN-FD
controllers.
New hardware / drivers
----------------------
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers
-------
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors.
- add support for configuring max SDU for each Tx queue.
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only
on shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll.
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates.
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices
(e.g. MAC address from efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ITVa
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the
default value allows for better BIG TCP performances
- Reduce compound page head access for zero-copy data transfers
- RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when
possible
- Threaded NAPI improvements, adding defer skb free support and
unneeded softirq avoidance
- Address dst_entry reference count scalability issues, via false
sharing avoidance and optimize refcount tracking
- Add lockless accesses annotation to sk_err[_soft]
- Optimize again the skb struct layout
- Extends the skb drop reasons to make it usable by multiple
subsystems
- Better const qualifier awareness for socket casts
BPF:
- Add skb and XDP typed dynptrs which allow BPF programs for more
ergonomic and less brittle iteration through data and
variable-sized accesses
- Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward
- Add more precise memory usage reporting for all BPF map types
- Adds support for using {FOU,GUE} encap with an ipip device
operating in collect_md mode and add a set of BPF kfuncs for
controlling encap params
- Allow BPF programs to detect at load time whether a particular
kfunc exists or not, and also add support for this in light
skeleton
- Bigger batch of BPF verifier improvements to prepare for upcoming
BPF open-coded iterators allowing for less restrictive looping
capabilities
- Rework RCU enforcement in the verifier, add kptr_rcu and enforce
BPF programs to NULL-check before passing such pointers into kfunc
- Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and
in local storage maps
- Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps
- Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree
- Add BPF verifier support for ST instructions in
convert_ctx_access() which will help new -mcpu=v4 clang flag to
start emitting them
- Add ARM32 USDT support to libbpf
- Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations
Protocols:
- IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value
indicates the provenance of the IP address
- IPv6: optimize route lookup, dropping unneeded R/W lock acquisition
- Add the handshake upcall mechanism, allowing the user-space to
implement generic TLS handshake on kernel's behalf
- Bridge: support per-{Port, VLAN} neighbor suppression, increasing
resilience to nodes failures
- SCTP: add support for Fair Capacity and Weighted Fair Queueing
schedulers
- MPTCP: delay first subflow allocation up to its first usage. This
will allow for later better LSM interaction
- xfrm: Remove inner/outer modes from input/output path. These are
not needed anymore
- WiFi:
- reduced neighbor report (RNR) handling for AP mode
- HW timestamping support
- support for randomized auth/deauth TA for PASN privacy
- per-link debugfs for multi-link
- TC offload support for mac80211 drivers
- mac80211 mesh fast-xmit and fast-rx support
- enable Wi-Fi 7 (EHT) mesh support
Netfilter:
- Add nf_tables 'brouting' support, to force a packet to be routed
instead of being bridged
- Update bridge netfilter and ovs conntrack helpers to handle IPv6
Jumbo packets properly, i.e. fetch the packet length from
hop-by-hop extension header. This is needed for BIT TCP support
- The iptables 32bit compat interface isn't compiled in by default
anymore
- Move ip(6)tables builtin icmp matches to the udptcp one. This has
the advantage that icmp/icmpv6 match doesn't load the
iptables/ip6tables modules anymore when iptables-nft is used
- Extended netlink error report for netdevice in flowtables and
netdev/chains. Allow for incrementally add/delete devices to netdev
basechain. Allow to create netdev chain without device
Driver API:
- Remove redundant Device Control Error Reporting Enable, as PCI core
has already error reporting enabled at enumeration time
- Move Multicast DB netlink handlers to core, allowing devices other
then bridge to use them
- Allow the page_pool to directly recycle the pages from safely
localized NAPI
- Implement lockless TX queue stop/wake combo macros, allowing for
further code de-duplication and sanitization
- Add YNL support for user headers and struct attrs
- Add partial YNL specification for devlink
- Add partial YNL specification for ethtool
- Add tc-mqprio and tc-taprio support for preemptible traffic classes
- Add tx push buf len param to ethtool, specifies the maximum number
of bytes of a transmitted packet a driver can push directly to the
underlying device
- Add basic LED support for switch/phy
- Add NAPI documentation, stop relaying on external links
- Convert dsa_master_ioctl() to netdev notifier. This is a
preparatory work to make the hardware timestamping layer selectable
by user space
- Add transceiver support and improve the error messages for CAN-FD
controllers
New hardware / drivers:
- Ethernet:
- AMD/Pensando core device support
- MediaTek MT7981 SoC
- MediaTek MT7988 SoC
- Broadcom BCM53134 embedded switch
- Texas Instruments CPSW9G ethernet switch
- Qualcomm EMAC3 DWMAC ethernet
- StarFive JH7110 SoC
- NXP CBTX ethernet PHY
- WiFi:
- Apple M1 Pro/Max devices
- RealTek rtl8710bu/rtl8188gu
- RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset
- Bluetooth:
- Realtek RTL8821CS, RTL8851B, RTL8852BS
- Mediatek MT7663, MT7922
- NXP w8997
- Actions Semi ATS2851
- QTI WCN6855
- Marvell 88W8997
- Can:
- STMicroelectronics bxcan stm32f429
Drivers:
- Ethernet NICs:
- Intel (1G, icg):
- add tracking and reporting of QBV config errors
- add support for configuring max SDU for each Tx queue
- Intel (100G, ice):
- refactor mailbox overflow detection to support Scalable IOV
- GNSS interface optimization
- Intel (i40e):
- support XDP multi-buffer
- nVidia/Mellanox:
- add the support for linux bridge multicast offload
- enable TC offload for egress and engress MACVLAN over bond
- add support for VxLAN GBP encap/decap flows offload
- extend packet offload to fully support libreswan
- support tunnel mode in mlx5 IPsec packet offload
- extend XDP multi-buffer support
- support MACsec VLAN offload
- add support for dynamic msix vectors allocation
- drop RX page_cache and fully use page_pool
- implement thermal zone to report NIC temperature
- Netronome/Corigine:
- add support for multi-zone conntrack offload
- Solarflare/Xilinx:
- support offloading TC VLAN push/pop actions to the MAE
- support TC decap rules
- support unicast PTP
- Other NICs:
- Broadcom (bnxt): enforce software based freq adjustments only on
shared PHC NIC
- RealTek (r8169): refactor to addess ASPM issues during NAPI poll
- Micrel (lan8841): add support for PTP_PF_PEROUT
- Cadence (macb): enable PTP unicast
- Engleder (tsnep): add XDP socket zero-copy support
- virtio-net: implement exact header length guest feature
- veth: add page_pool support for page recycling
- vxlan: add MDB data path support
- gve: add XDP support for GQI-QPL format
- geneve: accept every ethertype
- macvlan: allow some packets to bypass broadcast queue
- mana: add support for jumbo frame
- Ethernet high-speed switches:
- Microchip (sparx5): Add support for TC flower templates
- Ethernet embedded switches:
- Broadcom (b54):
- configure 6318 and 63268 RGMII ports
- Marvell (mv88e6xxx):
- faster C45 bus scan
- Microchip:
- lan966x:
- add support for IS1 VCAP
- better TX/RX from/to CPU performances
- ksz9477: add ETS Qdisc support
- ksz8: enhance static MAC table operations and error handling
- sama7g5: add PTP capability
- NXP (ocelot):
- add support for external ports
- add support for preemptible traffic classes
- Texas Instruments:
- add CPSWxG SGMII support for J7200 and J721E
- Intel WiFi (iwlwifi):
- preparation for Wi-Fi 7 EHT and multi-link support
- EHT (Wi-Fi 7) sniffer support
- hardware timestamping support for some devices/firwmares
- TX beacon protection on newer hardware
- Qualcomm 802.11ax WiFi (ath11k):
- MU-MIMO parameters support
- ack signal support for management packets
- RealTek WiFi (rtw88):
- SDIO bus support
- better support for some SDIO devices (e.g. MAC address from
efuse)
- RealTek WiFi (rtw89):
- HW scan support for 8852b
- better support for 6 GHz scanning
- support for various newer firmware APIs
- framework firmware backwards compatibility
- MediaTek WiFi (mt76):
- P2P support
- mesh A-MSDU support
- EHT (Wi-Fi 7) support
- coredump support"
* tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits)
net: phy: hide the PHYLIB_LEDS knob
net: phy: marvell-88x2222: remove unnecessary (void*) conversions
tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.
net: amd: Fix link leak when verifying config failed
net: phy: marvell: Fix inconsistent indenting in led_blink_set
lan966x: Don't use xdp_frame when action is XDP_TX
tsnep: Add XDP socket zero-copy TX support
tsnep: Add XDP socket zero-copy RX support
tsnep: Move skb receive action to separate function
tsnep: Add functions for queue enable/disable
tsnep: Rework TX/RX queue initialization
tsnep: Replace modulo operation with mask
net: phy: dp83867: Add led_brightness_set support
net: phy: Fix reading LED reg property
drivers: nfc: nfcsim: remove return value check of `dev_dir`
net: phy: dp83867: Remove unnecessary (void*) conversions
net: ethtool: coalesce: try to make user settings stick twice
net: mana: Check if netdev/napi_alloc_frag returns single page
net: mana: Rename mana_refill_rxoob and remove some empty lines
net: veth: add page_pool stats
...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZEYCQAAKCRBZ7Krx/gZQ
64FdAQDZ2hTDyZEWPt486dWYPYpiKyaGFXSXDGo7wgP0fiwxXQEA/mROKb6JqYw6
27mZ9A7qluT8r3AfTTQ0D+Yse/dr4AM=
=GA9W
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fget updates from Al Viro:
"fget() to fdget() conversions"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse_dev_ioctl(): switch to fdget()
cgroup_get_from_fd(): switch to fdget_raw()
bpf: switch to fdget_raw()
build_mount_idmapped(): switch to fdget()
kill the last remaining user of proc_ns_fget()
SVM-SEV: convert the rest of fget() uses to fdget() in there
convert sgx_set_attribute() to fdget()/fdput()
convert setns(2) to fdget()/fdput()
