Implement port isolation support via the Protected Ports register.
Protected ports can only communicate with unprotected ports, but not
with each other, matching the expected behaviour of isolated ports.
Tested on BCM963268BU.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251013152834.100169-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix several minor typos and grammatical errors in comments and log
(in fbnic firmware, PCI, and time modules)
Changes include:
- "cordeump" -> "coredump"
- "of" -> "off" in RPC config comment
- "healty" -> "healthy" in firmware heartbeat comment
- "Firmware crashed detected!" -> "Firmware crash detected!"
- "The could be caused" -> "This could be caused"
- "lockng" -> "locking" in fbnic_time.c
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251013160507.768820-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The debug message in br_fill_ifinfo() incorrectly refers to br_fill_info
instead of the actual function name. Update it for clarity in debugging
output.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251013100121.755899-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, it is possible to configure IFLA_HSR_VERSION, but
there is no way to check in userspace what the currently
configured HSR protocol version is.
Add it to the output of hsr_fill_info(), when the interface
is using the HSR protocol. Let's not expose it when using
the PRP protocol, since it only has one version and it's
not possible to set it from userspace.
This info could then be used by e.g. ip(8), like so:
$ ip -d link show hsr0
12: hsr0: <BROADCAST,MULTICAST> mtu ...
...
hsr slave1 veth0 slave2 veth1 ... proto 0 version 1
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Jan Vaclav <jvaclav@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251009210903.1055187-6-jvaclav@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we have struct netmem_desc, it'd better access the pp fields
via struct netmem_desc rather than struct net_iov.
Introduce netmem_to_nmdesc() for safely converting netmem_ref to
netmem_desc regardless of the type underneath e.i. netmem_desc, net_iov.
While at it, remove __netmem_clear_lsb() and make netmem_to_nmdesc()
used instead.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20251013044133.69472-1-byungchul@sk.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
drivers/net/wan/hdlc_ppp.c: In function ‘ppp_cp_event’:
drivers/net/wan/hdlc_ppp.c:353:17: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
353 | netdev_info(dev, "%s down\n", proto_name(pid));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wan/hdlc_ppp.c:342:17: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
342 | netdev_info(dev, "%s up\n", proto_name(pid));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Update proto_name() to return "LCP" by default instead of NULL.
This change silences the compiler without changing existing behavior
and removes the need for the local 'pname' variable in ppp_cp_event.
Suggested-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Link: https://patch.msgid.link/20251013014319.1608706-1-kriish.sharma2006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current release - regressions:
- mlx5: fix pre-2.40 binutils assembler error
Current release - new code bugs:
- net: psp: don't assume reply skbs will have a socket
- eth: fbnic: fix missing programming of the default descriptor
Previous releases - regressions:
- page_pool: fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
- tcp:
- take care of zero tp->window_clamp in tcp_set_rcvlowat()
- don't call reqsk_fastopen_remove() in tcp_conn_request().
- eth: ice: release xa entry on adapter allocation failure
- eth: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Previous releases - always broken:
- netfilter: validate objref and objrefmap expressions
- sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
- eth: mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
- eth: mlx5: prevent tunnel mode conflicts between FDB and NIC IPsec tables
- eth: ocelot: fix use-after-free caused by cyclic delayed work
Misc:
- add support for MediaTek PCIe 5G HP DRMR-H01
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=LlXo
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mlx5: fix pre-2.40 binutils assembler error
Current release - new code bugs:
- net: psp: don't assume reply skbs will have a socket
- eth: fbnic: fix missing programming of the default descriptor
Previous releases - regressions:
- page_pool: fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
- tcp:
- take care of zero tp->window_clamp in tcp_set_rcvlowat()
- don't call reqsk_fastopen_remove() in tcp_conn_request()
- eth:
- ice: release xa entry on adapter allocation failure
- usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Previous releases - always broken:
- netfilter: validate objref and objrefmap expressions
- sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
- eth:
- mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
- mlx5: prevent tunnel mode conflicts between FDB and NIC IPsec tables
- ocelot: fix use-after-free caused by cyclic delayed work
Misc:
- add support for MediaTek PCIe 5G HP DRMR-H01"
* tag 'net-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: airoha: Fix loopback mode configuration for GDM2 port
selftests: drv-net: pp_alloc_fail: add necessary optoins to config
selftests: drv-net: pp_alloc_fail: lower traffic expectations
selftests: drv-net: fix linter warnings in pp_alloc_fail
eth: fbnic: fix reporting of alloc_failed qstats
selftests: drv-net: xdp: add test for interface level qstats
selftests: drv-net: xdp: rename netnl to ethnl
eth: fbnic: fix saving stats from XDP_TX rings on close
eth: fbnic: fix accounting of XDP packets
eth: fbnic: fix missing programming of the default descriptor
selftests: netfilter: query conntrack state to check for port clash resolution
selftests: netfilter: nft_fib.sh: fix spurious test failures
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
netfilter: nft_objref: validate objref and objrefmap expressions
net: pse-pd: tps23881: Fix current measurement scaling
net/mlx5: fix pre-2.40 binutils assembler error
net/mlx5e: Do not fail PSP init on missing caps
net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed
net/mlx5: Prevent tunnel mode conflicts between FDB and NIC IPsec tables
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
...
- Compile the decompressor with -Wno-pointer-sign flag to avoid
a clang warning
- Fix incomplete conversion to flag output macros in __xsch(),
to avoid always zero return value instead of the expected
condition code
- Remove superfluous newlines from inline assemblies to improve
compiler inlining decisions
- Expose firmware provided UID Checking state in sysfs regardless
of the device presence or state
- CIO does not unregister subchannels when the attached device is
invalid or unavailable. Update the purge function to remove I/O
subchannels if the device number is found on cio_ignore list
- Consolidate PAI crypto allocation and cleanup paths
- The uv_get_secret_metadata() function has been removed some few
months ago, remove also the function mention it in a comment
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaOZurhccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8A7aAPwJ4hgGHrZY513Kk90eAYGcW7mL
k7L4Q5kJjQ9M1Y4eTgEAjr3BQLzshpYJVVDxuivZhYSPNOe7MJmolVfZroNv/AE=
=A/vb
-----END PGP SIGNATURE-----
Merge tag 's390-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Compile the decompressor with -Wno-pointer-sign flag to avoid a clang
warning
- Fix incomplete conversion to flag output macros in __xsch(), to avoid
always zero return value instead of the expected condition code
- Remove superfluous newlines from inline assemblies to improve
compiler inlining decisions
- Expose firmware provided UID Checking state in sysfs regardless of
the device presence or state
- CIO does not unregister subchannels when the attached device is
invalid or unavailable. Update the purge function to remove I/O
subchannels if the device number is found on cio_ignore list
- Consolidate PAI crypto allocation and cleanup paths
- The uv_get_secret_metadata() function has been removed some few
months ago, remove also the function mention it in a comment
* tag 's390-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/uv: Fix comment of uv_find_secret() function
s390/pai_crypto: Consolidate PAI crypto allocation and cleanup paths
s390/cio: Update purge function to unregister the unused subchannels
s390/pci: Expose firmware provided UID Checking state in sysfs
s390: Remove superfluous newlines from inline assemblies
s390/cio/ioasm: Fix __xsch() condition code handling
s390: Add -Wno-pointer-sign to KBUILD_CFLAGS_DECOMPRESSOR
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmjngFEbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYia2DMH+wdy8KaYLVstuYYI3AuX
7lilQCqEw7yKNrU2pS/yCOGRg2a+X5qFkMSRji9S1htALuyu8VS2X2MZrqgE0Q1y
oUKtZZuEaX80SPd2XhwpmsvCIo4V+bLtokHl2SsMD9tEV1AxKnO8UO5zMvxeqz8a
8XEfiGHU4oAm678hLhnQovA7akgn37uKhzFglevStwRVYELhxv5RNEoH6QsVKjr4
H7oTXQoYL4T+H84VDPXd8c26g3rhJ7fP1t0AthsZypOMoiiHDW08J03Qw9UQT+Hc
8NqgTgltczEvm0WExQ4xnCq6QZbwQLaPoulGFxP1iE4Ii0HLqU9SDkhv8i4fymBI
Fbk=
=1Zqd
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fixes for several corner cases in error paths and debugging options,
related to the new kmalloc_nolock() functionality (Kuniyuki Iwashima,
Ran Xiaokai)
* tag 'slab-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slub: Don't call lockdep_unregister_key() for immature kmem_cache.
slab: Fix using this_cpu_ptr() in preemptible context
slab: Add allow_spin check to eliminate kmemleak warnings
Add missing configuration for loopback mode in airhoha_set_gdm2_loopback
routine.
Fixes: 9cd451d414 ("net: airoha: Add loopback support for GDM2")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251008-airoha-loopback-mode-fix-v2-1-045694fe7f60@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski says:
====================
eth: fbnic: fix XDP_TX and XDP vs qstats
Fix XDP_TX hangs and adjust the XDP statistics to match the definition
of qstats. The three problems are somewhat distinct.
XDP_TX hangs is a simple coding bug (patch 1).
The accounting of XDP packets is all over the place. Fix it to obey
qstat rules (packets seen by XDP always counted as Rx packets).
Patch 2 fixes the basic accounting, patch 3 touches up saving
the stats when rings are freed.
Patch 6 corrects reporting of alloc_fail stats which prevented
the pp_alloc_fail test from passing.
Patches 4, 5, 7, 8, 9 add or fix related test cases.
v2:
- [patch 2] remove now unnecessary byte adjustment
- [patch 8] use seen_fails more
v1: https://lore.kernel.org/20251003233025.1157158-1-kuba@kernel.org
Testing on fbnic below:
$ ./tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py
TAP version 13
1..1
fbnic-err: bad MMIO read address 0x80074
fbnic-err: bad MMIO read address 0x80074
# Seen: pkts:20605 fails:40 (pass thrs:12)
# ethtool -G change retval: success
ok 1 pp_alloc_fail.test_pp_alloc
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
$ ./tools/testing/selftests/drivers/net/xdp.py
TAP version 13
1..13
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_sb
ok 6 xdp.test_xdp_native_tx_mb
# Failed run: pkt_sz 2048, offset 1. Last successful run: pkt_sz 1024, offset 256. Reason: Adjustment failed
ok 7 xdp.test_xdp_native_adjst_tail_grow_data
ok 8 xdp.test_xdp_native_adjst_tail_shrnk_data
# Failed run: pkt_sz 512, offset -256. Last successful run: pkt_sz 512, offset -128. Reason: Adjustment failed
ok 9 xdp.test_xdp_native_adjst_head_grow_data
# Failed run: pkt_sz (2048) > HDS threshold (1536) and offset 64 > 48
ok 10 xdp.test_xdp_native_adjst_head_shrnk_data
ok 11 xdp.test_xdp_native_qstats_pass
ok 12 xdp.test_xdp_native_qstats_drop
ok 13 xdp.test_xdp_native_qstats_tx
# Totals: pass:13 fail:0 xfail:0 xpass:0 skip:0 error:0
====================
Link: https://patch.msgid.link/20251007232653.2099376-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add kernel config for error injection as needed by pp_alloc_fail.py
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 9da271f825 ("selftests: drv-net-hw: add test for memory allocation failures with page pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lower the expected level of traffic in the pp_alloc_fail test
and calculate failure counter thresholds based on the traffic
rather than using a fixed constant.
We only have "QEMU HW" in NIPA right now, and the test (due to
debug dependencies) only works on debug kernels in the first place.
We need some place for it to pass otherwise it seems to be bit
rotting. So lower the traffic threshold so that it passes on QEMU
and with a debug kernel...
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix linter warnings, it's a bit hard to check for new ones otherwise.
W0311: Bad indentation. Found 16 spaces, expected 12 (bad-indentation)
C0114: Missing module docstring (missing-module-docstring)
W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
C0116: Missing function or method docstring (missing-function-docstring)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rx processing under normal circumstances has 3 rings - 2 buffer
rings (heads, payloads) and a completion ring. All the rings
have a struct fbnic_ring. Make sure we expose alloc_failed
counter from the buffer rings, previously only the alloc_failed
from the completion ring was reported, even tho all ring types
may increment this counter (buffer rings in __fbnic_fill_bdq()).
This makes the pp_alloc_fail.py test pass, it expects the qstat
to be incrementing as page pool injections happen.
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 67dc4eb5fc ("eth: fbnic: report software Rx queue stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Send a non-trivial number of packets and make sure that they
are counted correctly in qstats. Per qstats specification
XDP is the first layer of the stack so we should see Rx and Tx
counters go up for packets which went thru XDP.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Test uses "netnl" for the ethtool family which is quite confusing
(one would expect netdev family would use this name).
No functional changes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When rings are freed - stats get added to the device level stat
structs. Save the stats from the XDP_TX ring just as Tx stats.
Previously they would be saved to Rx and Tx stats. So we'd not
see XDP_TX packets as Rx during runtime but after an down/up cycle
the packets would appear in stats.
Correct the helper used by ethtool code which does a runtime
config switch.
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 5213ff0863 ("eth: fbnic: Collect packet statistics for XDP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make XDP-handled packets appear in the Rx stats. The driver has been
counting XDP_TX packets on the Tx ring, but there wasn't much accounting
on the Rx side (the Rx bytes appear to be incremented on XDP_TX but
XDP_DROP / XDP_ABORT are only counted as Rx drops).
Counting XDP_TX packets (not just bytes) in Rx stats looks like
a simple bug of omission.
The XDP_DROP handling appears to be intentional. Whether XDP_DROP
packets should be counted in interface-level Rx stats is a bit
unclear historically. When we were defining qstats, however,
we clarified based on operational experience that in this context:
name: rx-packets
doc: |
Number of wire packets successfully received and passed to the stack.
For drivers supporting XDP, XDP is considered the first layer
of the stack, so packets consumed by XDP are still counted here.
fbnic does not obey this requirement. Since XDP support has been added
in current release cycle, instead of splitting interface and qstat
handling - make them both follow the qstat definition.
Another small tweak here is that we count bytes as received on the wire
rather than post-XDP bytes (xdp_get_buff_len() vs skb->len).
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 5213ff0863 ("eth: fbnic: Collect packet statistics for XDP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
XDP_TX typically uses no offloads. To optimize XDP we added a "default
descriptor" feature to the chip, which allows us to send XDP frames with
just the buffer descriptors (DMA address + length). All the metadata
descriptors are derived from the queue config.
Commit under Fixes missed adding setting the defaults up when transplanting
the code from the prototype driver. Importantly after reset the "request
completion" bit is not set. Packets still get sent but there's no
completion, so ring is not cleaned up. We can send one ring's worth
of packets and then will start dropping all frames that got the XDP_TX
action from the XDP prog.
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 168deb7b31 ("eth: fbnic: Add support for XDP_TX action")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=u19C
-----END PGP SIGNATURE-----
Merge tag 'nf-25-10-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Fix crash (call recursion) when nftables synproxy extension is used
in an object map. When this feature was added in v5.4 the required
hook call validation was forgotten.
Fix from Fernando Fernandez Mancera.
2) bridge br_vlan_fill_forward_path_pvid uses incorrect
rcu_dereference_protected(); we only have rcu read lock but not
RTNL. Fix from Eric Woudstra.
Last two patches address flakes in two existing selftests.
netfilter pull request nf-25-10-08
* tag 'nf-25-10-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: query conntrack state to check for port clash resolution
selftests: netfilter: nft_fib.sh: fix spurious test failures
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
netfilter: nft_objref: validate objref and objrefmap expressions
====================
Link: https://patch.msgid.link/20251008125942.25056-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Extended 'perf annotate' with DWARF type information (--code-with-type)
integration in the TUI, including a 'T' hotkey to toggle it.
- Enhanced 'perf bench mem' with new mmap() workloads and control over
page/chunk sizes.
- Fix 'perf stat' error handling to correctly display unsupported events.
- Improved support for Clang cross-compilation.
- Refactored LLVM and Capstone disasm for modularity.
- Introduced the :X modifier to exclude an event from automatic regrouping.
- Adjusted KVM sampling defaults to use the "cycles" event to prevent failures.
- Added comprehensive support for decoding PowerPC Dispatch Trace Log (DTL).
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details.
- Synchronized Intel PMU events and metrics with TMA 5.1 across multiple
processor generations.
- Converted dependencies like libperl and libtracefs to be opt-in.
- Handle more Rust symbols in kallsyms ('N', debugging).
- Improve the python binding to allow for python based tools to use more
of the libraries, add a 'ilist' utility to test those new bindings.
- Various 'perf test' fixes.
- Kan Liang no longer a perf tools reviewer.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaObIdAAKCRCyPKLppCJ+
JyM+AQCWCqdMdiOrJfsqwBAthJmLA2j+haprucR9b2XAi0CLTAD8DGaax3XQbIxM
3D6PUd6/qschIy0f77eYqCYjVQXJkQM=
=ibgu
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Extended 'perf annotate' with DWARF type information
(--code-with-type) integration in the TUI, including a 'T'
hotkey to toggle it
- Enhanced 'perf bench mem' with new mmap() workloads and control
over page/chunk sizes
- Fix 'perf stat' error handling to correctly display unsupported
events
- Improved support for Clang cross-compilation
- Refactored LLVM and Capstone disasm for modularity
- Introduced the :X modifier to exclude an event from automatic
regrouping
- Adjusted KVM sampling defaults to use the "cycles" event to prevent
failures
- Added comprehensive support for decoding PowerPC Dispatch Trace Log
(DTL)
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details
- Synchronized Intel PMU events and metrics with TMA 5.1 across
multiple processor generations
- Converted dependencies like libperl and libtracefs to be opt-in
- Handle more Rust symbols in kallsyms ('N', debugging)
- Improve the python binding to allow for python based tools to use
more of the libraries, add a 'ilist' utility to test those new
bindings
- Various 'perf test' fixes
- Kan Liang no longer a perf tools reviewer
* tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (192 commits)
perf tools: Fix arm64 libjvmti build by generating unistd_64.h
perf tests: Don't retest sections in "Object code reading"
perf docs: Document building with Clang
perf build: Support build with clang
perf test coresight: Dismiss clang warning for unroll loop thread
perf test coresight: Dismiss clang warning for thread loop
perf test coresight: Dismiss clang warning for memcpy thread
perf build: Disable thread safety analysis for perl header
perf build: Correct CROSS_ARCH for clang
perf python: split Clang options when invoking Popen
tools build: Align warning options with perf
perf disasm: Remove unused evsel from 'struct annotate_args'
perf srcline: Fallback between addr2line implementations
perf disasm: Make ins__scnprintf() and ins__is_nop() static
perf dso: Clean up read_symbol() error handling
perf dso: Support BPF programs in dso__read_symbol()
perf dso: Move read_symbol() from llvm/capstone to dso
perf llvm: Reduce LLVM initialization
perf check: Add libLLVM feature
perf parse-events: Fix parsing of >30kb event strings
...
The refactoring in 4292a1e45f ("PCI: Refactor distributing available
memory to use loops") switched pci_bus_distribute_available_resources() to
operate on an array of bridge windows. That accidentally looked up bus
resources via pci_bus_resource_n() and then passed those pointers to helper
routines that expect the resource to belong to the device. As soon as we
execute that code, pci_resource_num() warned because the resource wasn't in
the bridge's resource array.
This happens on my AMD Strix Halo machine with Thunderbolt device; the
error message is shown below:
WARNING: CPU: 6 PID: 272 at drivers/pci/pci.h:471 pci_bus_distribute_available_resources+0x6ad/0x6d0
CPU: 6 UID: 0 PID: 272 Comm: irq/33-pciehp Not tainted 6.17.0+ #1 PREEMPT(voluntary)
Hardware name: PELADN YO Series/YO1, BIOS 1.04 05/15/2025
RIP: 0010:pci_bus_distribute_available_resources+0x6ad/0x6d0
Call Trace:
pci_bus_distribute_available_resources+0x590/0x6d0
pci_bridge_distribute_available_resources+0x62/0xb0
pci_assign_unassigned_bridge_resources+0x65/0x1b0
pciehp_configure_device+0x92/0x160
pciehp_handle_presence_or_link_change+0x1b5/0x350
pciehp_ist+0x147/0x1c0
Fix the regression by always fetching the resource directly from the bridge
with pci_resource_n(bridge, PCI_BRIDGE_RESOURCES + i). This restores the
original behaviour while keeping the refactored structure. Then we can
successfully assign resources to the Thunderbolt device.
Fixes: 4292a1e45f ("PCI: Refactor distributing available memory to use loops")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Closes: https://lore.kernel.org/r/dd551b81-9e81-480b-aab3-7cf8b8bbc1d0@panix.com
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
[bhelgaas: trim timestamps, etc from commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-By: Kenneth R. Crudup <kenny@panix.com>
Link: https://lore.kernel.org/r/F833CC81-7C60-48FC-A31C-B9999DCC6FA2@icloud.com
Link: https://patch.msgid.link/tencent_8C54420E1B0FF8D804C1B4651DF970716309@qq.com
- Optimizations for DMA map and unmap opertions through the type1
vfio IOMMU backend. This uses various means of batching and hints
from the mm structures to improve efficiency and therefore
performance, resulting in a significant speedup for huge page
use cases. (Li Zhe)
- Expose supported device migration features through debugfs.
(Cédric Le Goater)
-----BEGIN PGP SIGNATURE-----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=nPnW
-----END PGP SIGNATURE-----
Merge tag 'vfio-v6.18-rc1-pt2' of https://github.com/awilliam/linux-vfio
Pull more VFIO updates from Alex Williamson:
- Optimizations for DMA map and unmap opertions through the type1 vfio
IOMMU backend.
This uses various means of batching and hints from the mm structures
to improve efficiency and therefore performance, resulting in a
significant speedup for huge page use cases (Li Zhe)
- Expose supported device migration features through debugfs (Cédric Le
Goater)
* tag 'vfio-v6.18-rc1-pt2' of https://github.com/awilliam/linux-vfio:
vfio: Dump migration features under debugfs
vfio/type1: optimize vfio_unpin_pages_remote()
vfio/type1: introduce a new member has_rsvd for struct vfio_dma
vfio/type1: batch vfio_find_vpfn() in function vfio_unpin_pages_remote()
vfio/type1: optimize vfio_pin_pages_remote()
mm: introduce num_pages_contiguous()
- a number of conversions to yaml/json schema and fixes for
input-related device tree bindings
- a new driver for Awinic AW86927 haptic chip
- a new driver for Hynitron CST816x series controller
- a new driver for add Himax HX852x(ES) touchscreen controller
- a fix to uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- a fix to prevent overflow in pressure calculation in tsc2007 driver
causing phantom touches
- a change to Atmel maxTouch driver to support generic touchscreen
configuration (flip, rotate, etc.)
- support for platform data was dropped in tca8418_keypad,
pxa27x-keypad, spear-keyboard and twl4030_keypad drivers, they all
now rely on generic device properties for configuration
- other assorted changes and fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaOX1HQAKCRBAj56VGEWX
nC29AQCsDm6HBKXJZl6nAI8WHQiSvASFvyFlF6scVnfueX54mQEA6eE428+Cr1Sn
mDiwL38Es+PlZbdsi0J2q0vYzpr4yQU=
=JZIn
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
- Fix zstd regression.
- Ensure ti driver algorithm are set as async.
- Revert patch disabling SHA1 in FIPS mode.
- Fix RNG set_ent null-pointer dereference.
-----BEGIN PGP SIGNATURE-----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=IFdl
-----END PGP SIGNATURE-----
Merge tag 'v6.18-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Fix zstd regression
- Ensure ti driver algorithm are set as async
- Revert patch disabling SHA1 in FIPS mode
- Fix RNG set_ent null-pointer dereference
* tag 'v6.18-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rng - Ensure set_ent is always present
Revert "crypto: testmgr - desupport SHA-1 for FIPS 140"
crypto: ti - Add CRYPTO_ALG_ASYNC flag to DTHEv2 AES algos
crypto: zstd - Fix compression bug caused by truncation
The uv_get_secret_metadata() function has been removed some
months ago, so we should not mention it in the comment anymore.
Fixes: a42831f0b7 ("s390/uv: Remove uv_get_secret_metadata function")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Jakub reported this self test flaking occasionally (fails, but passes on
re-run) on debug kernels.
This is because the test checks for elapsed time to determine if both
connections were established in parallel.
Rework this to no longer depend on timing.
Use busywait helper to check that both sockets have moved to established
state and then query the conntrack engine for the two entries.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250926163318.40d1a502@kernel.org/
Fixes: 117e149e26 ("selftests: netfilter: test nat source port clash resolution interaction with tcp early demux")
Signed-off-by: Florian Westphal <fw@strlen.de>
Jakub reports spurious failure of nft_fib.sh test.
This is caused by a subtle bug inherited when i moved faulty ping
from one test case to another.
nft_fib.sh not only checks that the fib expression matched, it also
records the number of matches and then validates we have the expected
count. When I did this it was under the assumption that we would
have 0 to n matching packets. In case of the failure, the entry has
n+1 matching packets.
This happens because ping_unreachable helper uses "ping -c 1 -w 1",
instead of the intended "-W". -w alters the meaning of -c (count),
namely, its then treated as number of wanted *replies* instead of
"number of packets to send".
So, in some cases, ping -c 1 -w 1 ends up sending two packets which then
makes the test fail due to the higher-than-expected packet count.
Fix the actual bug (s/-w/-W) and also change the error handling:
1. Show the number of expected packets in the error message
2. Always try to delete the key from the set.
Else, later test that makes sure we don't have unexpected keys
in there will always fail as well.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250927090709.0b3cd783@kernel.org/
Fixes: 98287045c9 ("selftests: netfilter: move fib vrf test to nft_fib.sh")
Signed-off-by: Florian Westphal <fw@strlen.de>
Referencing a synproxy stateful object from OUTPUT hook causes kernel
crash due to infinite recursive calls:
BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12)
[...]
Call Trace:
__find_rr_leaf+0x99/0x230
fib6_table_lookup+0x13b/0x2d0
ip6_pol_route+0xa4/0x400
fib6_rule_lookup+0x156/0x240
ip6_route_output_flags+0xc6/0x150
__nf_ip6_route+0x23/0x50
synproxy_send_tcp_ipv6+0x106/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
nft_synproxy_do_eval+0x263/0x310
nft_do_chain+0x5a8/0x5f0 [nf_tables
nft_do_chain_inet+0x98/0x110
nf_hook_slow+0x43/0xc0
__ip6_local_out+0xf0/0x170
ip6_local_out+0x17/0x70
synproxy_send_tcp_ipv6+0x1a2/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
[...]
Implement objref and objrefmap expression validate functions.
Currently, only NFT_OBJECT_SYNPROXY object type requires validation.
This will also handle a jump to a chain using a synproxy object from the
OUTPUT hook.
Now when trying to reference a synproxy object in the OUTPUT hook, nft
will produce the following error:
synproxy_crash.nft: Error: Could not process rule: Operation not supported
synproxy name mysynproxy
^^^^^^^^^^^^^^^^^^^^^^^^
Fixes: ee394f96ad ("netfilter: nft_synproxy: add synproxy stateful object support")
Reported-by: Georg Pfuetzenreuter <georg.pfuetzenreuter@suse.com>
Closes: https://bugzilla.suse.com/1250237
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The reset GPIO is not toggled in any critical section where it couldn't
sleep, allow the reset GPIO to sleep. This allows the driver to operate
reset GPIOs connected to I2C GPIO expanders.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20251005023335.166483-1-marek.vasut@mailbox.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The TPS23881 improves on the TPS23880 with current sense resistors reduced
from 255 mOhm to 200 mOhm. This has a direct impact on the scaling of the
current measurement. However, the latest TPS23881 data sheet from May 2023
still shows the scaling of the TPS23880 model.
Fixes: 7f076ce3f1 ("net: pse-pd: tps23881: Add support for power limit and measurement features")
Signed-off-by: Thomas Wismer <thomas.wismer@scs.ch>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251006204029.7169-2-thomas@wismer.xyz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Old binutils versions require a slightly stricter syntax for the .arch_extension
directive and fail with the extra semicolon:
/tmp/cclfMnj9.s:656: Error: unknown architectural extension `simd;'
Drop the semicolon to make it work with all supported toolchain version.
Link: https://lore.kernel.org/all/20251001163655.GA370262@ax162/
Reported-by: Paolo Abeni <pabeni@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Fixes: fd8c821664 ("net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/20251006115640.497169-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ARM Development changes for 6.18-rc1:
- Use string choices helpers
- Add support for HAVE_FUNCTION_GRAPH_FREGS
-----BEGIN PGP SIGNATURE-----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=cy0V
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM development updates from Russell King:
- Use string choices helpers
- Add support for HAVE_FUNCTION_GRAPH_FREGS
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9457/1: ftrace: Implement HAVE_FUNCTION_GRAPH_FREGS
ARM: 9456/1: mm: fault: use string choices helper
ARM: 9454/1: kernel: bios32: use string choices helper
ARM: 9451/1: mm: l2x0: use string choices helper
- two small fixes for the recently performed code refactoring (Shigeru
Yoshida) and missing handling of direction parameter in DMA debug code
(Petr Tesarik)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaOTg+QAKCRCJp1EFxbsS
RDFkAQCxV0khAeYDuiPdub+9d5XGVGTjBxG1ErYsvDbbsZ3QpAEAhheuAdbMBYU1
kOwmGuBUY32d0cMz0/4BfKbIzuQs9wE=
=aE76
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.18-2025-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two small fixes for the recently performed code refactoring (Shigeru
Yoshida) and missing handling of direction parameter in DMA debug code
(Petr Tesarik)"
* tag 'dma-mapping-6.18-2025-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: fix direction in dma_alloc direction traces
kmsan: fix kmsan_handle_dma() to avoid false positives
Here are some small nvmem and fastrpc fixes for 6.18-rc1. They missed
the cut-off to get into 6.17-final, due to me being slow in getting them
out, my fault, not the maintainers of these subsystems :(
Anyway, better late than never. Changes included in here are:
- nvmem fix for automatic module loading
- fastrpc driver fixes for reported issues
All of these have been in linux-next for weeks (4?) with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOUMwg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yletACgvGqfpfSAd3c08ex6F9eDNsQ1aAcAn2p+h0nL
Xu/ja1YO8z+PBS6ji2Cz
=ILvk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small nvmem and fastrpc fixes that missed the cut-off to
get into 6.17-final, due to me being slow in getting them out, my
fault, not the maintainers of these subsystems :(
Anyway, better late than never. Changes included in here are:
- nvmem fix for automatic module loading
- fastrpc driver fixes for reported issues
All of these have been in linux-next for weeks (4?) with no reported
issues"
* tag 'char-misc-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: fastrpc: Skip reference for DMA handles
misc: fastrpc: fix possible map leak in fastrpc_put_args
misc: fastrpc: Fix fastrpc_map_lookup operation
misc: fastrpc: Save actual DMA size in fastrpc_map structure
nvmem: layouts: fix automatic module loading
Here are some staging driver fixes that missed 6.17-final due to my
travel schedule. They fix a number of reported issues in the axis-fifo
driver, one of which was just independently discovered by someone else
today so someone is looking at this code.
All of these fixes have been in linux-next for many weeks with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOUPzw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynK1wCgq1Nsc+QSYFnReib162tPcezuTBkAoL2Gnuik
9cLFKT3Dj/5kEF0jiSjh
=BUdt
-----END PGP SIGNATURE-----
Merge tag 'staging-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some staging driver fixes that missed 6.17-final due to my
travel schedule. They fix a number of reported issues in the axis-fifo
driver, one of which was just independently discovered by someone else
today so someone is looking at this code.
All of these fixes have been in linux-next for many weeks with no
reported issues"
* tag 'staging-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: axis-fifo: flush RX FIFO on read errors
staging: axis-fifo: fix TX handling on copy_from_user() failure
staging: axis-fifo: fix maximum TX packet length check
Here is a single driver fix for the qcom_geni_serial driver for
6.18-rc1. It has been in my tree for weeks, but missed being sent to
you for 6.17-final due to travel on my side.
This fixes a reported regression for this driver that prevents 6.17 from
working properly on this platform.
It has been in linux-next for many weeks with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaOUQrA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymmXwCgj5hLg2MHRlvZ+aCD0K/S2Qt4eqEAn32POqfZ
UntJ9O23oHW1+RmAvBB7
=zKb3
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty driver fix from Greg KH:
"Here is a single driver fix for the qcom_geni_serial driver. It has
been in my tree for weeks, but missed being sent to you for 6.17-final
due to travel on my side.
This fixes a reported regression for this driver that prevents 6.17
from working properly on this platform.
It has been in linux-next for many weeks with no reported issues"
* tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: Fix blocked task
Fix RZ/G3E driver introduction fall-out (Geert Uytterhoeven) and
improve the compilation and installation of the thermal library
for user space (Emil Dahl Juhl and Sascha Hauer)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjk+BUSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO16oEH/jAflHmItnOpFOQ59LTODD29OsUYffiN
pEqd/qveu7Hs9Rud5UPEVqvItNfPtCB2mxmD1dYtb0VpB1cTtAEwm1AiO1B35cw0
ycBP4BibEDBg97eHFj4maeKUAa+0xa4IlNVJRdf9b0RdZUkilTq17Iof0RhYFJqC
0Kq838KEUz9WuEFUZCoVKXLkCSexPekjZXDvVeCP9nrlD1b9R656dPcQ6fHBwxrI
5m2jGUkSVkwl/wz2zU1XDNeGALQNGMbM1zZGPXIJbl2fRCFEzsakQALbKelobTQ8
KUnftp4pTfkgjVAMyDwXcmTbJ3Gc0WOfbSDCDTR6jpHC1PW2pcNpBdA=
=NfCR
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Fix RZ/G3E driver introduction fall-out (Geert Uytterhoeven) and
improve the compilation and installation of the thermal library for
user space (Emil Dahl Juhl and Sascha Hauer)"
* tag 'thermal-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools: lib: thermal: expose thermal_exit symbols
tools: lib: thermal: don't preserve owner in install
tools: lib: thermal: use pkg-config to locate libnl3
thermal: renesas: Fix RZ/G3E fall-out
- Add missing synchronization between interface updates in the ACPI
battery driver (Rafael Wysocki)
- Remove open coded check for cpu_feature_enabled() from
acpi_processor_power_init_bm_check() (Mario Limonciello)
- Remove redundant rcu_read_lock/unlock() under spinlock from
ghes_notify_hed() in the ACPI APEI support code (pengdonglin)
- Make the .get_next_child_node() callback in the ACPI fwnode backend
skip ACPI devices that are not present for consistency with the
analogous callback in the OF fwnode backend (Sakari Ailus)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjk9loSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1zEwH/1b6+0ZA4EAG+TtPylVA5FptHUq9AUHW
rkk/bCjCaTfDsI2jffs3Ui1k4Gmwtr370EfwoXKx8dc8/4AQJZioqVIhbozXMDTx
0Hviylc8eTe6peeUJKl6RD/HrE38cOemlfX2M5t/2rENfBFp9ZI9KMrVpvermvX7
Nba+r0+mK75At90EsI25JzqxUuyW12A5wYORfXcznugEL69ovupqK3U01E/TEWWb
pqZgHbdMgtnP4F0hh2gDMDbWwxgEcm0lGkLoZ/w1UxKcw+wgeT0NaEP+c2+XiGrw
iXsXF8ZcfrZcq22rNR0SQ7kS0F2b9q6lqjkIfSKbHqqqaY8pXEBmEys=
=BQsI
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix a driver bug, clean up two pieces of code and improve the
fwnode API consistency:
- Add missing synchronization between interface updates in the ACPI
battery driver (Rafael Wysocki)
- Remove open coded check for cpu_feature_enabled() from
acpi_processor_power_init_bm_check() (Mario Limonciello)
- Remove redundant rcu_read_lock/unlock() under spinlock from
ghes_notify_hed() in the ACPI APEI support code (pengdonglin)
- Make the .get_next_child_node() callback in the ACPI fwnode backend
skip ACPI devices that are not present for consistency with the
analogous callback in the OF fwnode backend (Sakari Ailus)"
* tag 'acpi-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Return present device nodes only on fwnode interface
ACPI: APEI: Remove redundant rcu_read_lock/unlock() under spinlock
ACPI: battery: Add synchronization between interface updates
x86/acpi/cstate: Remove open coded check for cpu_feature_enabled()
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6 cycle
that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency() to
indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
- Make pm_runtime_put*() family of functions return 1 when the
given device is already suspended which is consistent with the
documentation (Brian Norris)
- Add basic kunit tests for runtime PM API contracts and update return
values in kerneldoc comments for the runtime PM API (Brian Norris,
Dan Carpenter)
- Add auto-cleanup macros for runtime PM "resume and get" and "get
without resume" operations, use one of them in the PCI core and
drop the existing "free" macro introduced for similar purpose, but
somewhat cumbersome to use (Rafael Wysocki)
- Make the core power management code avoid waiting on device links
marked as SYNC_STATE_ONLY which is consistent with the handling of
those device links elsewhere (Pin-yen Lin)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjk8hUSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1PtgH/0AwdSCX8uI44n/EnyjLlQFWOdNSpXI4
zAIReNLPP0skWrNwf5ivHYKPEWSeo0o0OjHiCjdTCC3uT8FxCLmjjlPS43zhhHem
41YQFRJb6GpwD86Vog25q5GSPOQORvRGYV+ZGlMesah0cE4qh4LxgVSNtftm9z7b
CjMFOeFEAAHFNGEEX4U2/GE+PFdbBGMjSDSfyLazKAKjZS436SOGvpP7NUTt0m9C
kxO2JLJuQXph5lqyzDRAUu1yOseEwM/f6Y5wWs1z/T5GeIacub/KypZlxhsjWALf
VxdXfvvLehidS747pxOzXPFhP8sXw1a4XdBNqlVGi/YjF7S9OuAxRMg=
=RfuO
-----END PGP SIGNATURE-----
Merge tag 'pm-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are cpufreq fixes and cleanups on top of the material merged
previously, a power management core code fix and updates of the
runtime PM framework including unit tests, documentation updates and
introduction of auto-cleanup macros for runtime PM "resume and get"
and "get without resuming" operations.
Specifics:
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6
cycle that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency()
to indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
- Make pm_runtime_put*() family of functions return 1 when the given
device is already suspended which is consistent with the
documentation (Brian Norris)
- Add basic kunit tests for runtime PM API contracts and update
return values in kerneldoc comments for the runtime PM API (Brian
Norris, Dan Carpenter)
- Add auto-cleanup macros for runtime PM "resume and get" and "get
without resume" operations, use one of them in the PCI core and
drop the existing "free" macro introduced for similar purpose, but
somewhat cumbersome to use (Rafael Wysocki)
- Make the core power management code avoid waiting on device links
marked as SYNC_STATE_ONLY which is consistent with the handling of
those device links elsewhere (Pin-yen Lin)"
* tag 'pm-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
docs/zh_CN: Fix malformed table
docs/zh_TW: Fix malformed table
PM: runtime: Fix error checking for kunit_device_register()
PM: runtime: Introduce one more usage counter guard
cpufreq: Drop unused symbol CPUFREQ_ETERNAL
ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value
cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
PM: runtime: Drop DEFINE_FREE() for pm_runtime_put()
PCI/sysfs: Use runtime PM guard macro for auto-cleanup
PM: runtime: Add auto-cleanup macros for "resume and get" operations
cpufreq: tegra186: Initialize all cores to max frequencies
cpufreq: tegra186: Set target frequency for all cpus in policy
rust: cpufreq: streamline find_supply_names
cpufreq: mediatek: fix device leak on probe failure
PM: sleep: Do not wait on SYNC_STATE_ONLY device links
PM: runtime: Update kerneldoc return codes
PM: runtime: Make put{,_sync}() return 1 when already suspended
PM: runtime: Add basic kunit tests for API contracts
struct clk_ops::determine_rate() instead of the round_rate() one so that we can
remove the round_rate clk_op entirely. Brian has taken up that task which
nobody else has wanted to do for close to a decade. Thanks Brian! This is all
prerequisite work to get to the real task of improving the clk rate setting
process. Once we have determine_rate() used everywhere, we'll be able to do
things like chain the rate request structs in linked lists to order the rate
setting operations or add more parameters without having to change every clk
driver in existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad this is
getting done.
Beyond this change we also have a tweak to the clk_lookup() function in the
core framework to use hashing on the clk name instead of a clk tree walk with
string comparisons. We _still_ rely on the clk name to be unique, because
historically we've used globally unique strings to describe the clk tree
topology. This tree walk becomes increasingly slow as more clks are added to
the system. Searching from the roots for a duplicate is simple but pretty dumb
and it wastes boot time so we're using a hash table as an improvement. Ideally
we wouldn't rely on the strings to be unique at all, relegating them to simply
debug information, but that is future work that will likely require some sort
of Kconfig knob indicating strings aren't used for topology description.
Outside of the core framework changes we have the usual new SoC support and
fixes to clk drivers for things that were discovered once the clks were used by
consumer drivers. Nothing in particular is jumping out at me in the "misc"
pile, except maybe the Amlogic driver that has gone through a refactoring. That
series got a fix from testing in -next though so it seems likely that things
have been getting good test coverage for a couple weeks already.
-----BEGIN PGP SIGNATURE-----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=fjY4
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
- Preserve old 'tt_core' UAPI for Hisilicon L3C PMU driver.
- Ensure linear alias of kprobes instruction page is not writable.
- Fix kernel stack unwinding from BPF.
- Fix build warnings from the Fujitsu uncore PMU documentation.
- Fix hang with deferred 'struct page' initialisation and MTE.
- Consolidate KPTI page-table re-writing code.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmjj0Q0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNJRvCACkC6isoQt+EdcS658ulgQJux9dqqJZq5uk
IdSFmorYd+MZfRcXe0HQ/rSJcAHzZH2gS1MvSeD1JfILPnY1ZkCFWHxsDdKK0Yc7
Sn+3xYw07qpBiq/hCvf9udTCl61vJveexUazV+FgOd9cT+cQOtkqW98uggjOx6Ry
HeECTovZ6NR23pB9NSu5l6lMbAOKZvbDuBYDOujYn/X5jP4v6qlGJTdB2YOA/qPy
C3aOcqCOWuET6uQ5iGeXWEB+RF6QCNuqjgQYo745Q+yKFdfZ60wokP8Fv2GERzlu
LO8YkYCzZRJF+lBbL8KfTjRE/fC6f0rHx9Zensm7FH9WsaDO/mWw
=xrAV
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Preserve old 'tt_core' UAPI for Hisilicon L3C PMU driver
- Ensure linear alias of kprobes instruction page is not writable
- Fix kernel stack unwinding from BPF
- Fix build warnings from the Fujitsu uncore PMU documentation
- Fix hang with deferred 'struct page' initialisation and MTE
- Consolidate KPTI page-table re-writing code
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not flag the zero page as PG_mte_tagged
docs: perf: Fujitsu: Fix htmldocs build warnings and errors
arm64: mm: Move KPTI helpers to mmu.c
tracing: Fix the bug where bpf_get_stackid returns -EFAULT on the ARM64
arm64: kprobes: call set_memory_rox() for kprobe page
drivers/perf: hisi: Add tt_core_deprecated for compatibility
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmjkpakTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXip5B/48MvTFJ1qwRGPVzevZQ8Z4SDogEREp
69VS/xRf1YCIzyXyanwqf1dXLq8NAqicSp6ewpJAmNA55/9O0cwT2EtohjeGCu61
krPIvS3KT7xI0uSEniBdhBtALYBscnQ0e3cAbLNzL7bwA6Q6OmvoIawpBADgE/cW
aZNCK9jy+WUqtXc6lNtkJtST0HWGDn0h04o2hjqIkZ+7ewjuEEJBUUB/JZwJ41Od
UxbID0PAcn9O4n/u/Y/GH65MX+ddrdCgPHEGCLAGAKT24lou3NzVv445OuCw0c4W
ilALIRb9iea56ZLVBW5O82+7g9Ag41LGq+841MNlZjeRNONGykaUpTWZ
=OR26
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
