With IORING_SETUP_SQPOLL all requests are created by the SQPOLL task,
which means that req->task should always match sqd->thread. Since
accesses to sqd->thread should be separately protected, use req->task
in io_req_normal_work_add() instead.
Note, in the eyes of io_req_normal_work_add(), the SQPOLL task struct
is always pinned and alive, and sqd->thread can either be the task or
NULL. It's only problematic if the compiler decides to reload the value
after the null check, which is not so likely.
Cc: stable@vger.kernel.org
Cc: Bui Quang Minh <minhquangbui99@gmail.com>
Reported-by: lizetao <lizetao1@huawei.com>
Fixes: 78f9b61bd8 ("io_uring: wake SQPOLL task when task_work is added to an empty queue")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1cbbe72cf32c45a8fee96026463024cd8564a7d7.1736541357.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Syzkeller reports:
BUG: KASAN: slab-use-after-free in thread_group_cputime+0x409/0x700 kernel/sched/cputime.c:341
Read of size 8 at addr ffff88803578c510 by task syz.2.3223/27552
Call Trace:
<TASK>
...
kasan_report+0x143/0x180 mm/kasan/report.c:602
thread_group_cputime+0x409/0x700 kernel/sched/cputime.c:341
thread_group_cputime_adjusted+0xa6/0x340 kernel/sched/cputime.c:639
getrusage+0x1000/0x1340 kernel/sys.c:1863
io_uring_show_fdinfo+0xdfe/0x1770 io_uring/fdinfo.c:197
seq_show+0x608/0x770 fs/proc/fd.c:68
...
That's due to sqd->task not being cleared properly in cases where
SQPOLL task tctx setup fails, which can essentially only happen with
fault injection to insert allocation errors.
Cc: stable@vger.kernel.org
Fixes: 1251d2025c ("io_uring/sqpoll: early exit thread if task_context wasn't allocated")
Reported-by: syzbot+3d92cfcfa84070b0a470@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/efc7ec7010784463b2e7466d7b5c02c2cb381635.1736519461.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_eventfd_do_signal() is invoked from an RCU callback, but when
dropping the reference to the io_ev_fd, it calls io_eventfd_free()
directly if the refcount drops to zero. This isn't correct, as any
potential freeing of the io_ev_fd should be deferred another RCU grace
period.
Just call io_eventfd_put() rather than open-code the dec-and-test and
free, which will correctly defer it another RCU grace period.
Fixes: 21a091b970 ("io_uring: signal registered eventfd to process deferred task work")
Reported-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Tested-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Li Zetao<lizetao1@huawei.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After update only the first shot of a multishot timeout request adheres
to the new timeout value while all subsequent retries continue to use
the old value. Don't forget to update the timeout stored in struct
io_timeout_data.
Cc: stable@vger.kernel.org
Fixes: ea97f6c855 ("io_uring: add support for multishot timeouts")
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e6516c3304eb654ec234cfa65c88a9579861e597.1736015288.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For non-pollable files, buffer ring consumption will commit upfront.
This is fine, but io_ring_buffer_select() will return the address of the
buffer after having committed it. For incrementally consumed buffers,
this is incorrect as it will modify the buffer address.
Store the pre-committed value and return that. If that isn't done, then
the initial part of the buffer is not used and the application will
correctly assume the content arrived at the start of the userspace
buffer, but the kernel will have put it later in the buffer. Or it can
cause a spurious -EFAULT returned in the CQE, depending on the buffer
size. As bounds are suitably checked for doing the actual IO, no adverse
side effects are possible - it's just a data misplacement within the
existing buffer.
Reported-by: Gwendal Fernet <gwendalfernet@gmail.com>
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d ("io_uring/kbuf: add support for incremental buffer consumption")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot reports that ->msg_inq may get used uinitialized from the
following path:
BUG: KMSAN: uninit-value in io_recv_buf_select io_uring/net.c:1094 [inline]
BUG: KMSAN: uninit-value in io_recv+0x930/0x1f90 io_uring/net.c:1158
io_recv_buf_select io_uring/net.c:1094 [inline]
io_recv+0x930/0x1f90 io_uring/net.c:1158
io_issue_sqe+0x420/0x2130 io_uring/io_uring.c:1740
io_queue_sqe io_uring/io_uring.c:1950 [inline]
io_req_task_submit+0xfa/0x1d0 io_uring/io_uring.c:1374
io_handle_tw_list+0x55f/0x5c0 io_uring/io_uring.c:1057
tctx_task_work_run+0x109/0x3e0 io_uring/io_uring.c:1121
tctx_task_work+0x6d/0xc0 io_uring/io_uring.c:1139
task_work_run+0x268/0x310 kernel/task_work.c:239
io_run_task_work+0x43a/0x4a0 io_uring/io_uring.h:343
io_cqring_wait io_uring/io_uring.c:2527 [inline]
__do_sys_io_uring_enter io_uring/io_uring.c:3439 [inline]
__se_sys_io_uring_enter+0x204f/0x4ce0 io_uring/io_uring.c:3330
__x64_sys_io_uring_enter+0x11f/0x1a0 io_uring/io_uring.c:3330
x64_sys_call+0xce5/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:427
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
and it is correct, as it's never initialized upfront. Hence the first
submission can end up using it uninitialized, if the recv wasn't
successful and the networking stack didn't honor ->msg_get_inq being set
and filling in the output value of ->msg_inq as requested.
Set it to 0 upfront when it's allocated, just to silence this KMSAN
warning. There's no side effect of using it uninitialized, it'll just
potentially cause the next receive to use a recv value hint that's not
accurate.
Fixes: c6f32c7d9e ("io_uring/net: get rid of ->prep_async() for receive side")
Reported-by: syzbot+068ff190354d2f74892f@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot reports that a recent fix causes nesting issues between the (now)
raw timeoutlock and the eventfd locking:
=============================
[ BUG: Invalid wait context ]
6.13.0-rc4-00080-g9828a4c0901f #29 Not tainted
-----------------------------
kworker/u32:0/68094 is trying to lock:
ffff000014d7a520 (&ctx->wqh#2){..-.}-{3:3}, at: eventfd_signal_mask+0x64/0x180
other info that might help us debug this:
context-{5:5}
6 locks held by kworker/u32:0/68094:
#0: ffff0000c1d98148 ((wq_completion)iou_exit){+.+.}-{0:0}, at: process_one_work+0x4e8/0xfc0
#1: ffff80008d927c78 ((work_completion)(&ctx->exit_work)){+.+.}-{0:0}, at: process_one_work+0x53c/0xfc0
#2: ffff0000c59bc3d8 (&ctx->completion_lock){+.+.}-{3:3}, at: io_kill_timeouts+0x40/0x180
#3: ffff0000c59bc358 (&ctx->timeout_lock){-.-.}-{2:2}, at: io_kill_timeouts+0x48/0x180
#4: ffff800085127aa0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x8/0x38
#5: ffff800085127aa0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x8/0x38
stack backtrace:
CPU: 7 UID: 0 PID: 68094 Comm: kworker/u32:0 Not tainted 6.13.0-rc4-00080-g9828a4c0901f #29
Hardware name: linux,dummy-virt (DT)
Workqueue: iou_exit io_ring_exit_work
Call trace:
show_stack+0x1c/0x30 (C)
__dump_stack+0x24/0x30
dump_stack_lvl+0x60/0x80
dump_stack+0x14/0x20
__lock_acquire+0x19f8/0x60c8
lock_acquire+0x1a4/0x540
_raw_spin_lock_irqsave+0x90/0xd0
eventfd_signal_mask+0x64/0x180
io_eventfd_signal+0x64/0x108
io_req_local_work_add+0x294/0x430
__io_req_task_work_add+0x1c0/0x270
io_kill_timeout+0x1f0/0x288
io_kill_timeouts+0xd4/0x180
io_uring_try_cancel_requests+0x2e8/0x388
io_ring_exit_work+0x150/0x550
process_one_work+0x5e8/0xfc0
worker_thread+0x7ec/0xc80
kthread+0x24c/0x300
ret_from_fork+0x10/0x20
because after the preempt-rt fix for the timeout lock nesting inside
the io-wq lock, we now have the eventfd spinlock nesting inside the
raw timeout spinlock.
Rather than play whack-a-mole with other nesting on the timeout lock,
split the deletion and killing of timeouts so queueing the task_work
for the timeout cancelations can get done outside of the timeout lock.
Reported-by: syzbot+b1fc199a40b65d601b65@syzkaller.appspotmail.com
Fixes: 020b40f356 ("io_uring: make ctx->timeout_lock a raw spinlock")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The io-wq path can downgrade a multishot request to oneshot mode,
however io_read_mshot() doesn't handle that and would still post
multiple CQEs. That's not allowed, because io_req_post_cqe() requires
stricter context requirements.
The described can only happen with pollable files that don't support
FMODE_NOWAIT, which is an odd combination, so if even allowed it should
be fairly rare.
Cc: stable@vger.kernel.org
Reported-by: chase xd <sl1589472800@gmail.com>
Fixes: bee1d5becd ("io_uring: disable io-wq execution of multishot NOWAIT requests")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c5c8c4a50a882fd581257b81bf52eee260ac29fd.1735407848.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BUG: KASAN: slab-use-after-free in __lock_acquire+0x370b/0x4a10 kernel/locking/lockdep.c:5089
Call Trace:
<TASK>
...
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
class_raw_spinlock_irqsave_constructor include/linux/spinlock.h:551 [inline]
try_to_wake_up+0xb5/0x23c0 kernel/sched/core.c:4205
io_sq_thread_park+0xac/0xe0 io_uring/sqpoll.c:55
io_sq_thread_finish+0x6b/0x310 io_uring/sqpoll.c:96
io_sq_offload_create+0x162/0x11d0 io_uring/sqpoll.c:497
io_uring_create io_uring/io_uring.c:3724 [inline]
io_uring_setup+0x1728/0x3230 io_uring/io_uring.c:3806
...
Kun Hu reports that the SQPOLL creating error path has UAF, which
happens if io_uring_alloc_task_context() fails and then io_sq_thread()
manages to run and complete before the rest of error handling code,
which means io_sq_thread_finish() is looking at already killed task.
Note that this is mostly theoretical, requiring fault injection on
the allocation side to trigger in practice.
Cc: stable@vger.kernel.org
Reported-by: Kun Hu <huk23@m.fudan.edu.cn>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0f2f1aa5729332612bd01fe0f2f385fd1f06ce7c.1735231717.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
task work can be executed after the task has gone through io_uring
termination, whether it's the final task_work run or the fallback path.
In this case, task work will find ->io_wq being already killed and
null'ed, which is a problem if it then tries to forward the request to
io_queue_iowq(). Make io_queue_iowq() fail requests in this case.
Note that it also checks PF_KTHREAD, because the user can first close
a DEFER_TASKRUN ring and shortly after kill the task, in which case
->iowq check would race.
Cc: stable@vger.kernel.org
Fixes: 50c52250e2 ("block: implement async io_uring discard cmd")
Fixes: 773af69121 ("io_uring: always reissue from task_work context")
Reported-by: Will <willsroot@protonmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/63312b4a2c2bb67ad67b857d17a300e1d3b078e8.1734637909.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With DEFER_TASKRUN, we know the ring can't be both waited upon and
resized at the same time. This is important for CQ resizing. Allowing SQ
ring resizing is more trivial, but isn't the interesting use case. Hence
limit ring resizing in general to DEFER_TASKRUN only for now. This isn't
a huge problem as CQ ring resizing is generally the most useful on
networking type of workloads where it can be hard to size the ring
appropriately upfront, and those should be using DEFER_TASKRUN for
better performance.
Fixes: 79cfe9e59c ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, io_uring_unreg_ringfd() (which cleans up registered rings) is
only called on exit, but __io_uring_free (which frees the tctx in which the
registered ring pointers are stored) is also called on execve (via
begin_new_exec -> io_uring_task_cancel -> __io_uring_cancel ->
io_uring_cancel_generic -> __io_uring_free).
This means: A process going through execve while having registered rings
will leak references to the rings' `struct file`.
Fix it by zapping registered rings on execve(). This is implemented by
moving the io_uring_unreg_ringfd() from io_uring_files_cancel() into its
callee __io_uring_cancel(), which is called from io_uring_task_cancel() on
execve.
This could probably be exploited *on 32-bit kernels* by leaking 2^32
references to the same ring, because the file refcount is stored in a
pointer-sized field and get_file() doesn't have protection against
refcount overflow, just a WARN_ONCE(); but on 64-bit it should have no
impact beyond a memory leak.
Cc: stable@vger.kernel.org
Fixes: e7a6c00dc7 ("io_uring: add support for registering ring file descriptors")
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20241218-uring-reg-ring-cleanup-v1-1-8f63e999045b@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chase reports that their tester complaints about a locking context
mismatch:
=============================
[ BUG: Invalid wait context ]
6.13.0-rc1-gf137f14b7ccb-dirty #9 Not tainted
-----------------------------
syz.1.25198/182604 is trying to lock:
ffff88805e66a358 (&ctx->timeout_lock){-.-.}-{3:3}, at: spin_lock_irq
include/linux/spinlock.h:376 [inline]
ffff88805e66a358 (&ctx->timeout_lock){-.-.}-{3:3}, at:
io_match_task_safe io_uring/io_uring.c:218 [inline]
ffff88805e66a358 (&ctx->timeout_lock){-.-.}-{3:3}, at:
io_match_task_safe+0x187/0x250 io_uring/io_uring.c:204
other info that might help us debug this:
context-{5:5}
1 lock held by syz.1.25198/182604:
#0: ffff88802b7d48c0 (&acct->lock){+.+.}-{2:2}, at:
io_acct_cancel_pending_work+0x2d/0x6b0 io_uring/io-wq.c:1049
stack backtrace:
CPU: 0 UID: 0 PID: 182604 Comm: syz.1.25198 Not tainted
6.13.0-rc1-gf137f14b7ccb-dirty #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x82/0xd0 lib/dump_stack.c:120
print_lock_invalid_wait_context kernel/locking/lockdep.c:4826 [inline]
check_wait_context kernel/locking/lockdep.c:4898 [inline]
__lock_acquire+0x883/0x3c80 kernel/locking/lockdep.c:5176
lock_acquire.part.0+0x11b/0x370 kernel/locking/lockdep.c:5849
__raw_spin_lock_irq include/linux/spinlock_api_smp.h:119 [inline]
_raw_spin_lock_irq+0x36/0x50 kernel/locking/spinlock.c:170
spin_lock_irq include/linux/spinlock.h:376 [inline]
io_match_task_safe io_uring/io_uring.c:218 [inline]
io_match_task_safe+0x187/0x250 io_uring/io_uring.c:204
io_acct_cancel_pending_work+0xb8/0x6b0 io_uring/io-wq.c:1052
io_wq_cancel_pending_work io_uring/io-wq.c:1074 [inline]
io_wq_cancel_cb+0xb0/0x390 io_uring/io-wq.c:1112
io_uring_try_cancel_requests+0x15e/0xd70 io_uring/io_uring.c:3062
io_uring_cancel_generic+0x6ec/0x8c0 io_uring/io_uring.c:3140
io_uring_files_cancel include/linux/io_uring.h:20 [inline]
do_exit+0x494/0x27a0 kernel/exit.c:894
do_group_exit+0xb3/0x250 kernel/exit.c:1087
get_signal+0x1d77/0x1ef0 kernel/signal.c:3017
arch_do_signal_or_restart+0x79/0x5b0 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218
do_syscall_64+0xd8/0x250 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
which is because io_uring has ctx->timeout_lock nesting inside the
io-wq acct lock, the latter of which is used from inside the scheduler
and hence is a raw spinlock, while the former is a "normal" spinlock
and can hence be sleeping on PREEMPT_RT.
Change ctx->timeout_lock to be a raw spinlock to solve this nesting
dependency on PREEMPT_RT=y.
Reported-by: chase xd <sl1589472800@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If cloning of buffers fail and we have to put the ones already grabbed,
check for NULL buffers and skip those. They used to be dummy ubufs, but
now they are just NULL and that should be checked before reaping them.
Reported-by: chase xd <sl1589472800@gmail.com>
Link: https://lore.kernel.org/io-uring/CADZouDQ7TcKn8gz8_efnyAEp1JvU1ktRk8PWz-tO0FXUoh8VGQ@mail.gmail.com/
Fixes: d50f94d761 ("io_uring/rsrc: get rid of the empty node and dummy_ubuf")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change the type of the res2 parameter in io_uring_cmd_done from ssize_t
to u64. This aligns the parameter type with io_req_set_cqe32_extra,
which expects u64 arguments.
The change eliminates potential issues on 32-bit architectures where
ssize_t might be 32-bit.
Only user of passing res2 is drivers/nvme/host/ioctl.c and it actually
passes u64.
Fixes: ee692a21e9 ("fs,io_uring: add infrastructure for uring-cmd")
Cc: stable@vger.kernel.org
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Tested-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Link: https://lore.kernel.org/r/20241203-io_uring_cmd_done-res2-as-u64-v2-1-5e59ae617151@ddn.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core: add of based component probing
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
Instead of a delicate dance between drivers and device tree quirks, this
change introduces a simple I2C component probe function. For a given
class of devices on the same I2C bus, it will go through all of them,
doing a simple I2C read transfer and see which one of them responds. It
will then enable the device that responds.
-----BEGIN PGP SIGNATURE-----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=MAxU
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
- Remove unused bprintf() function
bprintf() was added with the rest of the "bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0yNShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJ6AP9i8pFOjeMfb2hOBpJTzORkIXEbz5nG
OCK/5aeSdjxy8QEAqafBSr5IQOxaTCFve1p7WSwdgmi2ZLmqEasaud0LmAk=
=5bp1
-----END PGP SIGNATURE-----
Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function __udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
-----BEGIN PGP SIGNATURE-----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=X4bb
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Fix a case where posix timers with a thread-group-wide target would
miss signals if some of the group's threads are exiting
- Fix a hang caused by ndelay() calling the wrong delay function
__udelay()
- Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
(microsecond resolution) and a negative offset
* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Target group sigqueue to current task only if not exiting
delay: Fix ndelay() spuriously treated as udelay()
ntp: Remove invalid cast in time offset math
fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause some
virtual interrupts to get lost
- More platform_driver::remove() conversion
-----BEGIN PGP SIGNATURE-----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=xeni
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Move the ->select callback to the correct ops structure in
irq-mvebu-sei to fix some Marvell Armada platforms
- Add a workaround for Hisilicon ITS erratum 162100801 which can cause
some virtual interrupts to get lost
- More platform_driver::remove() conversion
* tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Switch back to struct platform_driver::remove()
irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801
irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
by erratum 1386 so that the matching loop actually terminates instead of
going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the relocatable
kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN has been
disabled
-----BEGIN PGP SIGNATURE-----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=RC2M
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a terminating zero end-element to the array describing AMD CPUs
affected by erratum 1386 so that the matching loop actually
terminates instead of going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the
relocatable kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN
has been disabled
* tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
x86/Documentation: Update algo in init_size description of boot protocol
x86/microcode/AMD: Flush patch buffer mapping after application
x86/mm: Carve out INVLPG inline asm for use by others
x86/cpu: Fix PPIN initialization
The point behind strscpy() was to once and for all avoid all the
problems with 'strncpy()' and later broken "fixed" versions like
strlcpy() that just made things worse.
So strscpy not only guarantees NUL-termination (unlike strncpy), it also
doesn't do unnecessary padding at the destination. But at the same time
also avoids byte-at-a-time reads and writes by _allowing_ some extra NUL
writes - within the size, of course - so that the whole copy can be done
with word operations.
It is also stable in the face of a mutable source string: it explicitly
does not read the source buffer multiple times (so an implementation
using "strnlen()+memcpy()" would be wrong), and does not read the source
buffer past the size (like the mis-design that is strlcpy does).
Finally, the return value is designed to be simple and unambiguous: if
the string cannot be copied fully, it returns an actual negative error,
making error handling clearer and simpler (and the caller already knows
the size of the buffer). Otherwise it returns the string length of the
result.
However, there was one final stability issue that can be important to
callers: the stability of the destination buffer.
In particular, the same way we shouldn't read the source buffer more
than once, we should avoid doing multiple writes to the destination
buffer: first writing a potentially non-terminated string, and then
terminating it with NUL at the end does not result in a stable result
buffer.
Yes, it gives the right result in the end, but if the rule for the
destination buffer was that it is _always_ NUL-terminated even when
accessed concurrently with updates, the final byte of the buffer needs
to always _stay_ as a NUL byte.
[ Note that "final byte is NUL" here is literally about the final byte
in the destination array, not the terminating NUL at the end of the
string itself. There is no attempt to try to make concurrent reads and
writes give any kind of consistent string length or contents, but we
do want to guarantee that there is always at least that final
terminating NUL character at the end of the destination array if it
existed before ]
This is relevant in the kernel for the tsk->comm[] array, for example.
Even without locking (for either readers or writers), we want to know
that while the buffer contents may be garbled, it is always a valid C
string and always has a NUL character at 'comm[TASK_COMM_LEN-1]' (and
never has any "out of thin air" data).
So avoid any "copy possibly non-terminated string, and terminate later"
behavior, and write the destination buffer only once.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa7
("vsprintf: add binary printf") but as far as I can see was never used,
unlike the other two functions in that patch.
Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=bPnr
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- When removing a PCI device, only look up and remove a platform device
if there is an associated device node for which there could be a
platform device, to fix a merge window regression (Brian Norris)
* tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctrl: Unregister platform device only if one actually exists
-----BEGIN PGP SIGNATURE-----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=ZCsN
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull ima fix from Paul Moore:
"One small patch to fix a function parameter / local variable naming
snafu that went up to you in the current merge window"
* tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
ima: uncover hidden variable in ima_match_rules()
-----BEGIN PGP SIGNATURE-----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=6cbB
-----END PGP SIGNATURE-----
Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmdJ6igQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjj3D/44ltUzbKLiGRE8wvtyWSFdAeGUT8DA0MTW
ot+Tr43PY6+J+v5ClUmgzJYqLRjNUxJAGUWM8Tmr7tZ2UtKwhHX/CEUtbqOEm2Sg
e6aofpzR+sXX+ZqZRrLMPj6gLvuklWra+1STyzA6EkcvLiMqsLCY/U8nIm03VW26
ua0kj+5477pEo9Hei4mfLtHCad94IX6UAv5xuh+90Xo9zxdWYA5sCv6SpXlG/5vy
VYF8yChIiQC3SBgs1ewALblkm2RsCU59p0/9mOHOeBYzaFnoOV66fHEawWwKF2qM
FLp6ZKpFEgxiRW9JpxhUw8Pv0hQx5FWN15FLLTPb/ss4Xo5uFRq8+0fDP8S5U9OT
T37sj1nej7adaSjRWkmrgclNggFyhMmoCO9jMWxO1dmWNtHB153xGWNUcd0v/P2+
FdjibQd79Wpq7aWbKPOQORU8rqshNusUVlge/KlvyufEne9EuOQVjGk/i2AEjU5y
f1DomdUbEBeGB2FE7w0YYquI0oBOLQvBBk/hQl5pW7rfMgFoU0WAXiZLaJhM0i81
RgbI5FH1rFZtsnJ3kG6HpNPcibK2seip6weNfgZZnDZCSOHiCZbuxi+WBLtupKng
8J+ZXoDjucBVRgrUQRz6Km62oTLJQ/6CcazqrKvLxERa0eB6SNOxZRd1XYNFKacn
xIyyyzQj1g==
=b84h
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
- Remove a leftover struct from when the cqwait registered waiting was
transitioned to regions.
- Fix for an issue introduced in this merge window, where nop->fd might
be used uninitialized. Ensure it's always set.
- Add capping of the task_work run in local task_work mode, to prevent
bursty and long chains from adding too much latency.
- Work around xa_store() leaving ->head non-NULL if it encounters an
allocation error during storing. Just a debug trigger, and can go
away once xa_store() behaves in a more expected way for this
condition. Not a major thing as it basically requires fault injection
to trigger it.
- Fix a few mapping corner cases
- Fix KCSAN complaint on reading the table size post unlock. Again not
a "real" issue, but it's easy to silence by just keeping the reading
inside the lock that protects it.
* tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux:
io_uring/tctx: work around xa_store() allocation error issue
io_uring: fix corner case forgetting to vunmap
io_uring: fix task_work cap overshooting
io_uring: check for overflows in io_pin_pages
io_uring/nop: ensure nop->fd is always initialized
io_uring: limit local tw done
io_uring: add io_local_work_pending()
io_uring/region: return negative -E2BIG in io_create_region()
io_uring: protect register tracing
io_uring: remove io_uring_cqwait_reg_arg
* Fixes.
RISC-V:
* Svade and Svadu (accessed and dirty bit) extension support for host and
guest. This was acked on the mailing list by the RISC-V maintainer, see
https://patchew.org/linux/20240726084931.28924-1-yongxuan.wang@sifive.com/.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmdKS0QUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP7hggAmt5CJesFGIuDwQgJX1KuNWAS84AX
Oq5SPZLH0XjE5YDm6AusSzvbtOhRM6mARU5/iqMRE6Mqpf4MXpP9tOo6xaDiL7+m
bOFsDYEO73WQyrIfFUCZ7dXiTbDVtQfNH8Z1yQwHPsa1d+WDYY3tLbCe5qCdqYMF
JDiB7K0cQzPDmhCwf3Zf8mW2ZRI0QsTqiuFUfVGGNgFDspWfBFBqkLCkrMNmbp9z
ye375oKb2VCe6OBJCY+Nl6tdoBUkz+CtZDCxkxuh0Uk4NmsUC9JMye9iwgU9DuI7
nagFuvpUGcgbZvrx1ly47TL+wcEFLwnBJ0xBZTGIgVoZHj/wX9GM+tSgIw==
=semZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
- ARM fixes
- RISC-V Svade and Svadu (accessed and dirty bit) extension support for
host and guest
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test
RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM
dt-bindings: riscv: Add Svade and Svadu Entries
RISC-V: Add Svade and Svadu Extensions Support
KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status
KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure
KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes
KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition
KVM: arm64: vgic: Make vgic_get_irq() more robust
KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
- sh: intc: Fix use-after-free bug in register_intc_controller()
- sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
-----BEGIN PGP SIGNATURE-----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=8ud9
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Two small fixes.
The first one by Huacai Chen addresses a runtime warning when
CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected
which occurs because the cpuinfo code on sh incorrectly uses NR_CPUS
when iterating CPUs instead of the runtime limit nr_cpu_ids.
A second fix by Dan Carpenter fixes a use-after-free bug in
register_intc_controller() which occurred as a result of improper
error handling in the interrupt controller driver code when
registering an interrupt controller during plat_irq_setup() on sh"
* tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: intc: Fix use-after-free bug in register_intc_controller()
sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
- Deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE so that tests depending
on it don't run (and fail) on arm64
- Fix lockdep assert in the Arm SMMUv3 PMU driver
- Fix the port and device ID bits setting in the Arm CMN perf driver
-----BEGIN PGP SIGNATURE-----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=ZNzJ
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE so that tests depending
on it don't run (and fail) on arm64
- Fix lockdep assert in the Arm SMMUv3 PMU driver
- Fix the port and device ID bits setting in the Arm CMN perf driver
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
perf/arm-cmn: Ensure port and device id bits are set properly
perf/arm-smmuv3: Fix lockdep assert in ->event_init()
arm64: disable ARCH_CORRECT_STACKTRACE_ON_KRETPROBE tests
since 2024.07.26:
assorted minor bug fixes
assorted platform specific tweaks
initial RAPL PSYS (SysWatt) support
Signed-off-by: Len Brown <len.brown@intel.com>
Introduce the counter as a part of global, platform counters structure.
We open the counter for only one cpu, but otherwise treat it as an
ordinary RAPL counter, allowing for grouped perf read.
The counter is disabled by default, because it's interpretation may
require additional, platform specific information, making it unsuitable
for general use.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add '+' to optstring when early scanning for --no-msr and --no-perf.
It causes option processing to stop as soon as a nonoption argument is
encountered, effectively skipping child's arguments.
Fixes: 3e4048466c ("tools/power turbostat: Add --no-msr option")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Force the --no-perf early to prevent using it as a source. User asks for
raw values, but perf returns them relative to the opening of the file
descriptor.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
On some machines, the graphics device is enumerated as
/sys/class/drm/card1 instead of /sys/class/drm/card0. The current
implementation does not handle this scenario, resulting in the loss of
graphics C6 residency and frequency information.
Add support for /sys/class/drm/card1, ensuring that turbostat can
retrieve and display the graphics columns for these platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Snapshots of the graphics sysfs knobs are taken based on file
descriptors. To optimize this process, open the files and cache the file
descriptors during the graphics probe phase. As a result, the previously
cached pathnames become redundant and are removed.
This change aims to streamline the code without altering its functionality.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, there is an inconsistency in how graphics sysfs knobs are
accessed: graphics residency sysfs knobs are opened and closed for each
read, while graphics frequency sysfs knobs are opened once and remain
open until turbostat exits. This inconsistency is confusing and adds
unnecessary code complexity.
Consolidate the access method by opening the sysfs files once and
reusing the file pointers for subsequent accesses. This approach
simplifies the code and ensures a consistent method for accessing
graphics sysfs knobs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The graphics sysfs knobs are read-only, making the use of fflush()
before reading them redundant.
Remove the unnecessary fflush() call.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In various generations, platforms often share a majority of features,
diverging only in a few specific aspects. The current approach of using
hardcoded values in 'platform_features' structure fails to effectively
represent these divergences.
To improve the description of platform divergence:
1. Each newly introduced 'platform_features' structure must have a base,
typically derived from the previous generation.
2. Platform feature values should be inherited from the base structure
rather than being hardcoded.
This approach ensures a more accurate and maintainable representation of
platform-specific features across different generations.
Converts `adl_features` and `lnl_features` to follow this new scheme.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add initial support for GraniteRapids-D. It shares the same features
with SapphireRapids.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Lunarlake supports CC1/CC6/CC7/PC2/PC6/PC10.
Remove PC3 support on Lunarlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
As ARL shares the same features with ADL/RPL/MTL, now 'arl_features' is
used by Lunarlake platform only.
Rename 'arl_features' to 'lnl_features'.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Similar to ADL/RPL/MTL, ARL supports CC1/CC6/CC7/PC2/PC3/PC6/PC8/PC10.
Add back PC8 support on Arrowlake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Similar to ADL/RPL, MTL support CC1/CC6/CC7/PC2/PC3/PC6/PC8/CP10.
Remove PC7/PC9 support on MTL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Honor --show CPU and --show Core when "topo.num_cpus == 1".
Previously turbostat assumed that on a 1-CPU system, these
columns should never appear.
Honoring these flags makes it easier for several programs
that parse turbostat output.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
