mirror of
https://github.com/torvalds/linux.git
synced 2026-07-29 10:41:49 +02:00
bd254115f3
1422777 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Bobby Eshleman
|
bd254115f3 |
eth: fbnic: increase FBNIC_HDR_BYTES_MIN from 128 to 256 bytes
Increase FBNIC_HDR_BYTES_MIN from 128 to 256 bytes. The previous minimum
was too small to guarantee that very long L2+L3+L4 headers always fit
within the header buffer. When EN_HDR_SPLIT is disabled and a packet
exceeds MAX_HEADER_BYTES, splitting occurs at that byte offset instead
of the header boundary, resulting in some of the header landing in the
payload page. The increased minimum ensures headers always fit with the
MAX_HEADER_BYTES cut off and land in the header page.
Fixes:
|
||
|
Bobby Eshleman
|
bbeb3bfbff |
eth: fbnic: set FBNIC_QUEUE_RDE_CTL0_EN_HDR_SPLIT on RDE_CTL0
Fix EN_HDR_SPLIT configuration by writing the field to RDE_CTL0 instead
of RDE_CTL1.
Because drop mode configuration and header splitting enablement both use
RDE_CTL0, we consolidate these configurations into the single function
fbnic_config_drop_mode.
Fixes:
|
||
|
Chengfeng Ye
|
ee5492fd88 |
fbnic: close fw_log race between users and teardown
Fixes a theoretical race on fw_log between the teardown path and fw_log
write functions.
fw_log is written inside fbnic_fw_log_write() and can be reached from
the mailbox handler fbnic_fw_msix_intr(), but fw_log is freed before
IRQ/MBX teardown during cleanup, resulting in a potential data race of
dereferencing a freed/null variable.
Possible Interleaving Scenario:
CPU0: fbnic_fw_msix_intr() // Entry
fbnic_fw_log_write()
if (fbnic_fw_log_ready()) // true
... preempt ...
CPU1: fbnic_remove() // Entry
fbnic_fw_log_free()
vfree(log->data_start);
log->data_start = NULL;
CPU0: continues, walks log->entries or writes to log->data_start
The initialization also has an incorrect order problem, as the fw_log
is currently allocated after MBX setup during initialization.
Fix the problems by adjusting the synchronization order to put
initialization in place before the mailbox is enabled, and not cleared
until after the mailbox has been disabled.
Fixes:
|
||
|
Jakub Kicinski
|
36e838630c |
Merge branch 'vsock-fix-child-netns-mode-initialization-and-restriction'
Stefano Garzarella says:
====================
vsock: fix child netns mode initialization and restriction
This series fixes two issues in the vsock network namespace support
recently introduced by commit
|
||
|
Stefano Garzarella
|
6a997f38bd |
vsock: prevent child netns mode switch from local to global
A "local" namespace can change its `child_ns_mode` sysctl to "global",
allowing nested namespaces to access global CIDs. This can be exploited
by an unprivileged user who gained CAP_NET_ADMIN through a user
namespace.
Prevent this by rejecting writes that attempt to set `child_ns_mode` to
"global" when the current namespace's mode is "local".
Fixes:
|
||
|
Stefano Garzarella
|
9dd391493a |
vsock: fix child netns mode initialization
When a new network namespace is created, vsock_net_init() correctly
initializes the namespace's mode by reading the parent's `child_ns_mode`
via vsock_net_child_mode(). However, the `child_ns_mode` of the new
namespace was always hardcoded to VSOCK_NET_MODE_GLOBAL, regardless of
its own mode.
This means that if a parent namespace has `child_ns_mode` set to "local",
the child namespace correctly gets mode "local", but its `child_ns_mode`
is reset to "global". As a result, further nested namespaces will
incorrectly get mode "global" instead of inheriting "local", breaking
the expected propagation of the mode through nested namespaces.
Fix this by initializing `child_ns_mode` to the namespace's own mode,
so the setting propagates correctly through all levels of nesting.
Fixes:
|
||
|
Daniel Machon
|
a49d2a2c37 |
net: sparx5/lan969x: fix PTP clock max_adj value
The max_adj field in ptp_clock_info tells userspace how much the PHC
clock frequency can be adjusted. ptp4l reads this and will never request
a correction larger than max_adj.
On both sparx5 and lan969x the clock offset may never converge because
the servo needs a frequency correction larger than the current max_adj
of 200000 (200 ppm) allows. The servo rails at the max and the offset
stays in the tens of microseconds.
The hardware has no inherent max adjustment limit; frequency correction
is done by writing a 64-bit clock period increment to CLK_PER_CFG, and
the register has plenty of range. The 200000 value was just an overly
conservative software limit. The max_adj is shared between sparx5 and
lan969x, and the increased value is safe for both.
Fix this by increasing max_adj to 10000000 (10000 ppm), giving the
servo sufficient headroom.
Fixes:
|
||
|
Kuniyuki Iwashima
|
8244f959e2 |
ipv6: Fix out-of-bound access in fib6_add_rt2node().
syzbot reported out-of-bound read in fib6_add_rt2node(). [0]
When IPv6 route is created with RTA_NH_ID, struct fib6_info
does not have the trailing struct fib6_nh.
The cited commit started to check !iter->fib6_nh->fib_nh_gw_family
to ensure that rt6_qualify_for_ecmp() will return false for iter.
If iter->nh is not NULL, rt6_qualify_for_ecmp() returns false anyway.
Let's check iter->nh before reading iter->fib6_nh and avoid OOB read.
[0]:
BUG: KASAN: slab-out-of-bounds in fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
Read of size 1 at addr ffff8880384ba6de by task syz.0.18/5500
CPU: 0 UID: 0 PID: 5500 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
fib6_add_rt2node_nh net/ipv6/ip6_fib.c:1363 [inline]
fib6_add+0x910/0x18c0 net/ipv6/ip6_fib.c:1531
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3957
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f9316b9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd8809b678 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f9316e15fa0 RCX: 00007f9316b9aeb9
RDX: 0000000000000000 RSI: 0000200000004380 RDI: 0000000000000003
RBP: 00007f9316c08c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f9316e15fac R14: 00007f9316e15fa0 R15: 00007f9316e15fa0
</TASK>
Allocated by task 5499:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5657 [inline]
__kmalloc_noprof+0x40c/0x7e0 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
fib6_info_alloc+0x30/0xf0 net/ipv6/ip6_fib.c:155
ip6_route_info_create+0x142/0x860 net/ipv6/route.c:3820
ip6_route_add+0x49/0x1b0 net/ipv6/route.c:3949
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes:
|
||
|
Qanux
|
6db8b56eed |
ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00).
Fixes:
|
||
|
Pin-yen Lin
|
a68a9bd086 |
selftests: netconsole: Increase port listening timeout
wait_for_port() can wait up to 2 seconds with the sleep and the polling
in wait_local_port_listen() combined. So, in netcons_basic.sh, the socat
process could die before the test writes to the netconsole.
Increase the timeout to 3 seconds to make netcons_basic.sh pass
consistently.
Fixes:
|
||
|
Jakub Kicinski
|
8383522821 |
Merge branch 'net-mscc-ocelot-fix-missing-lock-in-ocelot_port_xmit'
Ziyi Guo says:
====================
net: mscc: ocelot: fix missing lock in ocelot_port_xmit()
ocelot_port_xmit() calls ocelot_can_inject() and
ocelot_port_inject_frame() without holding the injection group lock.
Both functions contain lockdep_assert_held() for the injection lock,
and the correct caller felix_port_deferred_xmit() properly acquires
the lock using ocelot_lock_inj_grp() before calling these functions.
this v3 splits the fix into a 3-patch series to separate
refactoring from the behavioral change:
1/3: Extract the PTP timestamp handling into an ocelot_xmit_timestamp()
helper so the logic isn't duplicated when the function is split.
2/3: Split ocelot_port_xmit() into ocelot_port_xmit_fdma() and
ocelot_port_xmit_inj(), keeping the FDMA and register injection
code paths fully separate.
3/3: Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() in
ocelot_port_xmit_inj() to fix the missing lock protection.
Patches 1-2 are pure refactors with no behavioral change.
Patch 3 is the actual bug fix.
====================
Link: https://patch.msgid.link/20260208225602.1339325-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Ziyi Guo
|
026f6513c5 |
net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj()
ocelot_port_xmit_inj() calls ocelot_can_inject() and
ocelot_port_inject_frame() without holding the injection group lock.
Both functions contain lockdep_assert_held() for the injection lock,
and the correct caller felix_port_deferred_xmit() properly acquires
the lock using ocelot_lock_inj_grp() before calling these functions.
Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register
injection path to fix the missing lock protection. The FDMA path is not
affected as it uses its own locking mechanism.
Fixes:
|
||
|
Ziyi Guo
|
47f79b20e7 |
net: mscc: ocelot: split xmit into FDMA and register injection paths
Split ocelot_port_xmit() into two separate functions: - ocelot_port_xmit_fdma(): handles the FDMA injection path - ocelot_port_xmit_inj(): handles the register-based injection path The top-level ocelot_port_xmit() now dispatches to the appropriate function based on the ocelot_fdma_enabled static key. This is a pure refactor with no behavioral change. Separating the two code paths makes each one simpler and prepares for adding proper locking to the register injection path without affecting the FDMA path. Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20260208225602.1339325-3-n7l8m4@u.northwestern.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Ziyi Guo
|
29372f07f7 |
net: mscc: ocelot: extract ocelot_xmit_timestamp() helper
Extract the PTP timestamp handling logic from ocelot_port_xmit() into a separate ocelot_xmit_timestamp() helper function. This is a pure refactor with no behavioral change. The helper returns false if the skb was consumed (freed) due to a timestamp request failure, and true if the caller should continue with frame injection. The rew_op value is returned via pointer. This prepares for splitting ocelot_port_xmit() into separate FDMA and register injection paths in a subsequent patch. Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20260208225602.1339325-2-n7l8m4@u.northwestern.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Daniel Machon
|
6c28aa8dfd |
net: sparx5/lan969x: fix DWRR cost max to match hardware register width
DWRR (Deficit Weighted Round Robin) scheduling distributes bandwidth
across traffic classes based on per-queue cost values, where lower cost
means higher bandwidth share.
The SPX5_DWRR_COST_MAX constant is 63 (6 bits) but the hardware
register field HSCH_DWRR_ENTRY_DWRR_COST is GENMASK(24, 20), only
5 bits wide (max 31). This causes sparx5_weight_to_hw_cost() to
compute cost values that silently overflow via FIELD_PREP, resulting
in incorrect scheduling weights.
Set SPX5_DWRR_COST_MAX to 31 to match the hardware register width.
Fixes:
|
||
|
Duoming Zhou
|
8930878101 |
atm: fore200e: fix use-after-free in tasklets during device removal
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis.
Fixes:
|
||
|
Jie Zhang
|
babab1b42e |
net: stmmac: fix oops when split header is enabled
For GMAC4, when split header is enabled, in some rare cases, the
hardware does not fill buf2 of the first descriptor with payload.
Thus we cannot assume buf2 is always fully filled if it is not
the last descriptor. Otherwise, the length of buf2 of the second
descriptor will be calculated wrong and cause an oops:
Unable to handle kernel paging request at virtual address ffff00019246bfc0
...
x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000
Call trace:
dcache_inval_poc+0x28/0x58 (P)
dma_direct_sync_single_for_cpu+0x38/0x6c
__dma_sync_single_for_cpu+0x34/0x6c
stmmac_napi_poll_rx+0x8f0/0xb60
__napi_poll.constprop.0+0x30/0x144
net_rx_action+0x160/0x274
handle_softirqs+0x1b8/0x1fc
...
To fix this, the PL bit-field in RDES3 register is used for all
descriptors, whether it is the last descriptor or not.
Fixes:
|
||
|
Ethan Nelson-Moore
|
d03e094473 |
net: intel: fix PCI device ID conflict between i40e and ipw2200
The ID 8086:104f is matched by both i40e and ipw2200. The same device
ID should not be in more than one driver, because in that case, which
driver is used is unpredictable. Fix this by taking advantage of the
fact that i40e devices use PCI_CLASS_NETWORK_ETHERNET and ipw2200
devices use PCI_CLASS_NETWORK_OTHER to differentiate the devices.
Fixes:
|
||
|
Gal Pressman
|
ed6788c5a7 |
selftests: drv-net: limit RPS test CPUs to supported range
The _get_unused_cpus() function can return CPU numbers >= 16, which
exceeds RPS_MAX_CPUS in toeplitz.c. When this happens, the test fails
with a cryptic message:
# Exception| Traceback (most recent call last):
# Exception| File "/tmp/cur/linux/tools/testing/selftests/net/lib/py/ksft.py", line 319, in ksft_run
# Exception| func(*args)
# Exception| File "/tmp/cur/linux/tools/testing/selftests/drivers/net/hw/toeplitz.py", line 189, in test
# Exception| with bkg(" ".join(rx_cmd), ksft_ready=True, exit_wait=True) as rx_proc:
# Exception| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
# Exception| File "/tmp/cur/linux/tools/testing/selftests/net/lib/py/utils.py", line 124, in __init__
# Exception| super().__init__(comm, background=True,
# Exception| File "/tmp/cur/linux/tools/testing/selftests/net/lib/py/utils.py", line 77, in __init__
# Exception| raise Exception("Did not receive ready message")
# Exception| Exception: Did not receive ready message
Rename _get_unused_cpus() to _get_unused_rps_cpus() and cap the CPU
search range to RPS_MAX_CPUS.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260210093110.1935149-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Yue Haibing
|
10ec0fc0cc |
selftests: net: lib: Fix jq parsing error
The testcase failed as below:
$./vlan_bridge_binding.sh
...
+ adf_ip_link_set_up d1
+ local name=d1
+ shift
+ ip_link_is_up d1
+ ip_link_has_flag d1 UP
+ local name=d1
+ shift
+ local flag=UP
+ shift
++ ip -j link show d1
++ jq --arg flag UP 'any(.[].flags.[]; . == $flag)'
jq: error: syntax error, unexpected '[', expecting FORMAT or QQSTRING_START
(Unix shell quoting issues?) at <top-level>, line 1:
any(.[].flags.[]; . == $flag)
jq: 1 compile error
Remove the extra dot (.) after flags array to fix this.
Fixes:
|
||
|
Chen Ni
|
fe6515f595 |
bng_en: Remove duplicate include
Remove duplicate inclusion of <net/netdev_queues.h>. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Link: https://patch.msgid.link/20260211032021.2719742-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Ido Schimmel
|
a2646773a0 |
selftests: mlxsw: tc_restrictions: Fix test failure with new iproute2
As explained in [1], iproute2 started rejecting tc-police burst sizes
that result in an overflow. This can happen when the burst size is high
enough and the rate is low enough.
A couple of test cases specify such configurations, resulting in
iproute2 errors and test failure.
Fix by reducing the burst size so that the test will pass with both new
and old iproute2 versions.
[1] https://lore.kernel.org/netdev/20250916215731.3431465-1-jay.vosburgh@canonical.com/
Fixes:
|
||
|
Jeremy Kerr
|
a6a9bc544b |
net: mctp: ensure our nlmsg responses are initialised
Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from DEVCORE Research Team working with Trend Micro Zero Day Initiative report that a RTM_GETNEIGH will return uninitalised data in the pad bytes of the ndmsg data. Ensure we're initialising the netlink data to zero, in the link, addr and neigh response messages. Fixes: |
||
|
Chen Ni
|
7c375811b5 |
myri10ge: replace comma with semicolons
Commit
|
||
|
Jakub Kicinski
|
5a70285662 |
Merge branch 'net-phy_port-sfp-modules-representation-and-phy_port-listing'
Maxime Chevallier says: ==================== net: phy_port: SFP modules representation and phy_port listing (part) ==================== Applying just the initial cleanup + fixes from the series. Link: https://patch.msgid.link/20260205092317.755906-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Maxime Chevallier
|
4cebb26ac6 |
net: phy: phy_port: Correctly recompute the port's linkmodes
a PHY-driven phy_port contains a 'supported' field containing the
linkmodes available on this port. This is populated based on :
- The PHY's reported features
- The DT representation of the connector
- The PHY's attach_mdi() callback
As these different attrbution methods work in conjunction, the helper
phy_port_update_supported() recomputes the final 'supported' value based
on the populated mediums, linkmodes and pairs.
However this recompute wasn't correctly implemented, and added more
modes than necessary by or'ing the medium-specific modes to the existing
support. Let's fix this and properly filter the modes.
Fixes:
|
||
|
Maxime Chevallier
|
6248f3dc4e |
net: phy: phy_port: Cleanup the of-parsing logic for phy_port
We don't need to maintain a mediums bitfield, let's drop it and drop a bogus check for empty mediums, as we already check it above. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Link: https://patch.msgid.link/20260205092317.755906-3-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Maxime Chevallier
|
0561667105 |
net: phy: initialize the port support based on the PHY's for OF ports
With the phy_port infrastructure came an ethernet-connector binding, allowing to represent the MDI of a PHY in devicetree. This allows specifying the mediums and pairs of a port. Let's initialize the port's supported list based on what the PHY reports, so that we can then filter it with what the connector allows using. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org> Link: https://patch.msgid.link/20260205092317.755906-2-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
37a93dd5c4 |
Networking changes for 7.0
Core & protocols
----------------
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls for
small helper and stack canary overhead in the fast-path. This
generates better and faster code with very small or no text size
increases, as in many cases the call generated more code than the
actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage by
up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the RX
path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without the
HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified, aligning
IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the rate
shaper of sch_cake across multiple CPUs, while still enforcing a
single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations that
are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information, saving
cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most protocols,
avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies between
the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes back
online.
Driver API
----------
- Support for switching the working mode (automatic vs manual) of a DPLL
device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties, to
generalize polarity inversion requirements for differential signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers
--------------
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram and
NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the used
H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO, leading to
12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN metadata
access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support
multi-wiphy devices and and pave the way for future device support
in the same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O31Y
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
||
|
Linus Torvalds
|
098b6e44cb |
Devicetree updates for v7.0:
DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system controllers,
Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI WT61P803 PUZZLE, Delta
Electronics DPS-800-AB power supply, Infineon IR35221 Digital
Multi-phase Controller, Infineon PXE1610 Digital Dual Output 6+1
VR12.5 & VR13 CPU Controller, socionext,uniphier-smpctrl, and
xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files. These
are mostly for arm64 platforms which is getting closer to be warning
free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers
-----BEGIN PGP SIGNATURE-----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=RE7t
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Sync dtc/libfdt with upstream v1.7.2-62-ga26ef6400bd8
- Add a for_each_compatible_node_scoped() loop and convert users in
cpufreq, dmaengine, clk, cdx, powerpc and Arm
- Simplify of/platform.c with scoped loop helpers
- Add fw_devlink tracking for "mmc-pwrseq"
- Optimize fw_devlink callback code size for pinctrl-N properties
- Replace strcmp_suffix() with strends()
DT bindings:
- Support building single binding targets
- Convert google,goldfish-fb, cznic,turris-mox-rwtm, ti,prm-inst
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
|
||
|
Linus Torvalds
|
c6e62d002b |
Driver core changes for 7.0-rc1
- Bus:
- Ensure bus->match() is consistently called with the device lock held
- Improve type safety of bus_find_device_by_acpi_dev()
- Devtmpfs:
- Parse 'devtmpfs.mount=' boot parameter with kstrtoint() instead of
simple_strtoul()
- Avoid sparse warning by making devtmpfs_context_ops static
- IOMMU:
- Do not register the qcom_smmu_tbu_driver in arm_smmu_device_probe()
- MAINTAINERS:
- Add the new driver-core mailing list (driver-core@lists.linux.dev)
to all relevant entries
- Add missing tree location for "FIRMWARE LOADER (request_firmware)"
- Add driver-model documentation to the "DRIVER CORE" entry
- Add missing driver-core maintainers to the "AUXILIARY BUS" entry
- Misc:
- Change return type of attribute_container_register() to void; it has
always been infallible
- Do not export sysfs_change_owner(), sysfs_file_change_owner() and
device_change_owner()
- Move devres_for_each_res() from the public devres header to
drivers/base/base.h
- Do not use a static struct device for the faux bus; allocate it
dynamically
- Revocable:
- Patches for the revocable synchronization primitive have been
scheduled for v7.0-rc1, but have been reverted as they need some
more refinement
- Rust:
- Device:
- Support dev_printk on all device types, not just the core Device
struct; remove now-redundant .as_ref() calls in dev_* print calls
- Devres:
- Introduce an internal reference count in Devres<T> to avoid a
deadlock condition in case of (indirect) nesting
- DMA:
- Allow drivers to tune the maximum DMA segment size via
dma_set_max_seg_size()
- I/O:
- Introduce the concept of generic I/O backends to handle different
kinds of device shared memory through a common interface.
This enables higher-level concepts such as register abstractions,
I/O slices, and field projections to be built generically on top.
In a first step, introduce the Io, IoCapable<T>, and IoKnownSize
trait hierarchy for sharing a common interface supporting offset
validation and bound-checking logic between I/O backends.
- Refactor MMIO to use the common I/O backend infrastructure
- Misc:
- Add __rust_helper annotations to C helpers for inlining into Rust
code
- Use "kernel vertical" style for imports
- Replace kernel::c_str! with C string literals
- Update ARef imports to use sync::aref
- Use pin_init::zeroed() for struct auxiliary_device_id and debugfs
file_operations initialization
- Use LKMM atomic types in debugfs doc-tests
- Various minor comment and documentation fixes
- PCI:
- Implement PCI configuration space accessors using the common I/O
backend infrastructure
- Document pci::Bar device endianness assumptions
- SoC:
- Abstractions for struct soc_device and struct soc_device_attribute
- Sample driver for soc::Device
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaY0JegAKCRBFlHeO1qrK
LtCjAQDeSqGuzQM6hkMjsUWbjdWyw0yrrXcOxhwIINTc7uCzogEA7JL00+eiKHYu
SV2Ckn6UnSQ14rpEaDIzgZdurZHGUAM=
=TL00
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Bus:
- Ensure bus->match() is consistently called with the device lock
held
- Improve type safety of bus_find_device_by_acpi_dev()
Devtmpfs:
- Parse 'devtmpfs.mount=' boot parameter with kstrtoint() instead of
simple_strtoul()
- Avoid sparse warning by making devtmpfs_context_ops static
IOMMU:
- Do not register the qcom_smmu_tbu_driver in arm_smmu_device_probe()
MAINTAINERS:
- Add the new driver-core mailing list (driver-core@lists.linux.dev)
to all relevant entries
- Add missing tree location for "FIRMWARE LOADER (request_firmware)"
- Add driver-model documentation to the "DRIVER CORE" entry
- Add missing driver-core maintainers to the "AUXILIARY BUS" entry
Misc:
- Change return type of attribute_container_register() to void; it
has always been infallible
- Do not export sysfs_change_owner(), sysfs_file_change_owner() and
device_change_owner()
- Move devres_for_each_res() from the public devres header to
drivers/base/base.h
- Do not use a static struct device for the faux bus; allocate it
dynamically
Revocable:
- Patches for the revocable synchronization primitive have been
scheduled for v7.0-rc1, but have been reverted as they need some
more refinement
Rust:
- Device:
- Support dev_printk on all device types, not just the core Device
struct; remove now-redundant .as_ref() calls in dev_* print
calls
- Devres:
- Introduce an internal reference count in Devres<T> to avoid a
deadlock condition in case of (indirect) nesting
- DMA:
- Allow drivers to tune the maximum DMA segment size via
dma_set_max_seg_size()
- I/O:
- Introduce the concept of generic I/O backends to handle
different kinds of device shared memory through a common
interface.
This enables higher-level concepts such as register
abstractions, I/O slices, and field projections to be built
generically on top.
In a first step, introduce the Io, IoCapable<T>, and IoKnownSize
trait hierarchy for sharing a common interface supporting offset
validation and bound-checking logic between I/O backends.
- Refactor MMIO to use the common I/O backend infrastructure
- Misc:
- Add __rust_helper annotations to C helpers for inlining into
Rust code
- Use "kernel vertical" style for imports
- Replace kernel::c_str! with C string literals
- Update ARef imports to use sync::aref
- Use pin_init::zeroed() for struct auxiliary_device_id and
debugfs file_operations initialization
- Use LKMM atomic types in debugfs doc-tests
- Various minor comment and documentation fixes
- PCI:
- Implement PCI configuration space accessors using the common I/O
backend infrastructure
- Document pci::Bar device endianness assumptions
- SoC:
- Abstractions for struct soc_device and struct soc_device_attribute
- Sample driver for soc::Device"
* tag 'driver-core-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (79 commits)
rust: devres: fix race condition due to nesting
rust: dma: add missing __rust_helper annotations
samples: rust: pci: Remove some additional `.as_ref()` for `dev_*` print
Revert "revocable: Revocable resource management"
Revert "revocable: Add Kunit test cases"
Revert "selftests: revocable: Add kselftest cases"
driver core: remove device_change_owner() export
sysfs: remove exports of sysfs_*change_owner()
driver core: disable revocable code from build
revocable: Add KUnit test for concurrent access
revocable: fix SRCU index corruption by requiring caller-provided storage
revocable: Add KUnit test for provider lifetime races
revocable: Fix races in revocable_alloc() using RCU
driver core: fix inverted "locked" suffix of driver_match_device()
rust: io: move MIN_SIZE and io_addr_assert to IoKnownSize
rust: pci: re-export ConfigSpace
rust: dma: allow drivers to tune max segment size
gpu: tyr: remove redundant `.as_ref()` for `dev_*` print
rust: auxiliary: use `pin_init::zeroed()` for device ID
rust: debugfs: use pin_init::zeroed() for file_operations
...
|
||
|
Linus Torvalds
|
1c2b4a4c2b |
pci-v7.0-changes
-----BEGIN PGP SIGNATURE-----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=LIjp
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
||
|
Linus Torvalds
|
61e629596f |
- dm-verity: various optimizations and fixes related to forward error
correction
- dm-verity: add a .dm-verity keyring
- dm-integrity: fix bugs with growing a device in bitmap mode
- dm-mpath: fix leaking fake timeout requests, a UAF bug caused by stale
rq->bio and minor bugs in device creation
- dm-core: fix a bug related to blkg association, avoid unnecessary
blk-crypto work on invalid keys
- dm-bufio: dm-bufio cleanup and optimization (reducing hash table
lookups)
- various other minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCaYsfghQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbcwnAP9Ny3YqC63GI5qH2cd8N42zRQ8P4sN+
k4cz1XtrstoA4wEA/357lutlowGgUoHUkVRKK03AcGnbcVJk0yMyRDo/0gs=
=wvTt
-----END PGP SIGNATURE-----
Merge tag 'for-7.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- dm-verity:
- various optimizations and fixes related to forward error correction
- add a .dm-verity keyring
- dm-integrity: fix bugs with growing a device in bitmap mode
- dm-mpath:
- fix leaking fake timeout requests
- fix UAF bug caused by stale rq->bio
- fix minor bugs in device creation
- dm-core:
- fix a bug related to blkg association
- avoid unnecessary blk-crypto work on invalid keys
- dm-bufio:
- dm-bufio cleanup and optimization (reducing hash table lookups)
- various other minor fixes and cleanups
* tag 'for-7.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
dm mpath: make pg_init_delay_msecs settable
Revert "dm: fix a race condition in retrieve_deps"
dm mpath: Add missing dm_put_device when failing to get scsi dh name
dm vdo encodings: clean up header and version functions
dm: use bio_clone_blkg_association
dm: fix excessive blk-crypto operations for invalid keys
dm-verity: fix section mismatch error
dm-unstripe: fix mapping bug when there are multiple targets in a table
dm-integrity: fix recalculation in bitmap mode
dm-bufio: avoid redundant buffer_tree lookups
dm-bufio: merge cache_put() into cache_put_and_wake()
selftests: add dm-verity keyring selftests
dm-verity: add dm-verity keyring
dm: clear cloned request bio pointer when last clone bio completes
dm-verity: fix up various workqueue-related comments
dm-verity: switch to bio_advance_iter_single()
dm-verity: consolidate the BH and normal work structs
dm: add WQ_PERCPU to alloc_workqueue users
dm-integrity: fix a typo in the code for write/discard race
dm: use READ_ONCE in dm_blk_report_zones
...
|
||
|
Linus Torvalds
|
1e0ea4dff0 |
IOMMU Updates for Linux v7.0
Including:
- Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
- Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
- AMD-Vi changes:
- Support for nested translations
- Other minor improvements
- ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS".
- ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes.
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors.
- Add device-tree support for NVIDIA's CMDQV extension.
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields.
- Don't disable ATS for nested S1-bypass nested domains.
- Additions to the kunit selftests.
-----BEGIN PGP SIGNATURE-----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=W/nW
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
AMD-Vi changes:
- Support for nested translations
- Other minor improvements
ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS"
ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors
- Add device-tree support for NVIDIA's CMDQV extension
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields
- Don't disable ATS for nested S1-bypass nested domains
- Additions to the kunit selftests"
* tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommupt: Always add IOVA range to iotlb_gather in gather_range_pages()
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
iommu/amd: Fix type of type parameter to amd_iommufd_hw_info()
iommu/arm-smmu-v3: Do not set disable_ats unless vSTE is Translate
iommu/arm-smmu-v3-test: Add nested s1bypass/s1dssbypass coverage
iommu/arm-smmu-v3: Mark EATS_TRANS safe when computing the update sequence
iommu/arm-smmu-v3: Mark STE MEV safe when computing the update sequence
iommu/arm-smmu-v3: Add update_safe bits to fix STE update sequence
iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
iommu/tegra241-cmdqv: Decouple driver from ACPI
iommu/arm-smmu-qcom: Restore ACTLR settings for MDSS on sa8775p
iommu/vt-d: Fix race condition during PASID entry replacement
iommu/vt-d: Clear Present bit before tearing down context entry
iommu/vt-d: Clear Present bit before tearing down PASID entry
iommu/vt-d: Flush piotlb for SVM and Nested domain
iommu/vt-d: Flush cache for PASID table before using it
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
rust: iommu: fix `srctree` link warning
rust: iommu: fix Rust formatting
...
|
||
|
Linus Torvalds
|
c22e26bd09 |
Landlock update for v7.0-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCaYyMphAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbS5/gBAJIeIF/mLZQZ2HK/W58PzJGyXQDplgnTYWp2 XnMIY/26AQCVYeEh0GFEe5oX7644bsyvJocXPrIkmJGrsit/VHuRAQ== =iG0O -----END PGP SIGNATURE----- Merge tag 'landlock-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: - extend Landlock to enforce restrictions on a whole process, similarly to the seccomp's TSYNC flag - refactor data structures to simplify code and improve performance - add documentation to cover missing parts * tag 'landlock-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: mailmap: Add entry for Mickaël Salaün landlock: Transpose the layer masks data structure landlock: Add access_mask_subset() helper selftests/landlock: Add filesystem access benchmark landlock: Document audit blocker field format landlock: Add errata documentation section landlock: Add backwards compatibility for restrict flags landlock: Refactor TCP socket type check landlock: Minor reword of docs for TCP access rights landlock: Document LANDLOCK_RESTRICT_SELF_TSYNC selftests/landlock: Add LANDLOCK_RESTRICT_SELF_TSYNC tests landlock: Multithreading support for landlock_restrict_self() |
||
|
Linus Torvalds
|
d0e91e401e |
integrity-v7.0
-----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCaYs/hBQcem9oYXJAbGlu dXguaWJtLmNvbQAKCRDLwZzRsCrn5eukAPwJU7iQocLQHgS5VlTBXrc5R+hGwEA3 s+6aMV1p8SV36wEA4pG7kzmoCOjcOegYlzWxWoYDKnkcsI2Oc17RpnuwBgw= =MnYd -----END PGP SIGNATURE----- Merge tag 'integrity-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "Just two bug fixes: IMA's detecting scripts (bprm_creds_for_exec), and calculating the EVM HMAC" * tag 'integrity-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: evm: Use ordered xattrs list to calculate HMAC in evm_init_hmac() ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec() |
||
|
Linus Torvalds
|
146fa666d8 |
Smack fixes for DOI specification.
-----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEC+9tH1YyUwIQzUIeOKUVfIxDyBEFAmmKSTEXHGNhc2V5QHNj aGF1Zmxlci1jYS5jb20ACgkQOKUVfIxDyBGqEQ//eOIvp9zTrtUz628TMrTwRN3a cnz/tgwsjaRjj5HMYWZNNAMCP4D5kzThX+vgxzqis5k4489c3ZyGbiD7z0uJBxSO 3fhklFFwSMH5ii5suk+r30dpCseY49Kl6Pn+mL+/DnhtJb9UQnsZ8kvB/JxFFTIj gdYh5eqrD/JDFltE/ZIiXFB6pdp8nAo4rr8qyCYIxligES7Y3ofZzRueC3lOAIw7 WDqln0nTaMPjL81mi+83bqIahZvNRLLL9RbXE0WiUC8C/lPIOgRj2AMU2TKqT+41 ttyy2QTxoBhze2tcOqgvNMxENfRD0g4+Gx9rViZIAfceY7oEw/wP7l7LS4qATWvu 3oISLwPP64m2rH3M1MRckwgtvnPzGZF6o0PlnBVoA0cMc5GBmbLAa5JdvZno1nvZ kFFbF/V02MnFGSL/05AASrIpnGb/uPL2ntWtc5HvxQXI4pkn5OXpdS1ZAgO6eDPa f1p9VERLrmAhW83pCHGlhmkpqKHpL3MIvfJUBi5fxq9RoX/XlZR9B15QYGZ8PVYe XQdwsVKBaULPHUzi4nMkl79GMW1CmxQUja5HQgsRdwVPvWbP2QmzYD2TLFeUN7mL 0XNvzMhY0kL0ZYHbzyqagqog3Fkz2zKkfbrC4yUBamF/hi626hUW8IwFepcLaywg 2v5o6EyGGxMeotIEtq8= =AEdq -----END PGP SIGNATURE----- Merge tag 'Smack-for-7.0' of https://github.com/cschaufler/smack-next Pull smack updates from Casey Schaufler: "Two improvements to the code for setting the CIPSO Domain Of Interpretation (DOI), a seldom used feature, and a formatting change" * tag 'Smack-for-7.0' of https://github.com/cschaufler/smack-next: smack: /smack/doi: accept previously used values smack: /smack/doi must be > 0 security: smack: fix indentation in smack_access.c |
||
|
Linus Torvalds
|
db9571a661 |
printk changes for 7.0
-----BEGIN PGP SIGNATURE-----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=2Iob
-----END PGP SIGNATURE-----
Merge tag 'printk-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Check all mandatory callbacks when registering nbcon consoles
- Fix some compiler warnings
* tag 'printk-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsnprintf: drop __printf() attributes on binary printing functions
printf: convert test_hashed into macro
printk: nbcon: Check for device_{lock,unlock} callbacks
|
||
|
Linus Torvalds
|
148f95f75c |
slab updates for 7.0
-----BEGIN PGP SIGNATURE----- iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmmK68UbFIAAAAAABAAO bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiamM8H/0eOKSvZG/C/HdTm36cy pVjOjgX9KmlHoeH1dOMjqgL2KfOIBis8j1GY0Q/qF1a86uzQa6uuz4XdmJeTUkEE YfzwOdaLIR0U6R/gIH9YPfyU9h3VBLUNtotDculntSO3ZgwY5QUHQHz+ROnVG5SU MSQ2oshSRkh06LRIlvbd0kLax8vZy8UjfYPonF33+XRya17nIY6V2DvqC0MDuEcM jWvbQfm5HTamTAlSV4bmJw+U/FehEdpC4U0ulsAtQILGpJvHCwqDGCNQRFkzcsaM yhi1JLFCZcoHqbQycZMNAypPERfIp8O5thSU6xU2AP/cNl2scR/7/MSuWOvjKBv4 pKU= =u52A -----END PGP SIGNATURE----- Merge tag 'slab-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab updates from Vlastimil Babka: - The percpu sheaves caching layer was introduced as opt-in in 6.18 and now we enable it for all caches and remove the previous cpu (partial) slab caching mechanism. Besides the lower locking overhead and much more likely fastpath when freeing, this removes the rather complicated code related to the cpu slab lockless fastpaths (using this_cpu_try_cmpxchg128/64) and all its complications for PREEMPT_RT or kmalloc_nolock(). The lockless slab freelist+counters update operation using try_cmpxchg128/64 remains and is crucial for freeing remote NUMA objects, and to allow flushing objects from sheaves to slabs mostly without the node list_lock (Vlastimil Babka) - Eliminate slabobj_ext metadata overhead when possible. Instead of using kmalloc() to allocate the array for memcg and/or allocation profiling tag pointers, use leftover space in a slab or per-object padding due to alignment (Harry Yoo) - Various followup improvements to the above (Hao Li) * tag 'slab-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (39 commits) slub: let need_slab_obj_exts() return false if SLAB_NO_OBJ_EXT is set mm/slab: only allow SLAB_OBJ_EXT_IN_OBJ for unmergeable caches mm/slab: place slabobj_ext metadata in unused space within s->size mm/slab: move [__]ksize and slab_ksize() to mm/slub.c mm/slab: save memory by allocating slabobj_ext array from leftover mm/memcontrol,alloc_tag: handle slabobj_ext access under KASAN poison mm/slab: use stride to access slabobj_ext mm/slab: abstract slabobj_ext access via new slab_obj_ext() helper ext4: specify the free pointer offset for ext4_inode_cache mm/slab: allow specifying free pointer offset when using constructor mm/slab: use unsigned long for orig_size to ensure proper metadata align slub: clarify object field layout comments mm/slab: avoid allocating slabobj_ext array from its own slab slub: avoid list_lock contention from __refill_objects_any() mm/slub: cleanup and repurpose some stat items mm/slub: remove DEACTIVATE_TO_* stat items slab: remove frozen slab checks from __slab_free() slab: update overview comments slab: refill sheaves from all nodes slab: remove unused PREEMPT_RT specific macros ... |
||
|
Linus Torvalds
|
41f1a08645 |
Kbuild/Kconfig updates for 7.0
Kbuild changes
==============
* Drop '*_probe' pattern from modpost section check allowlist, which hid
legitimate warnings (Johan Hovold)
* Disable -Wtype-limits altogether, instead of enabling at W=2 (Vincent
Mailhol)
* Improve UAPI testing to skip testing headers that require a libc when
CONFIG_CC_CAN_LINK is not set, opening up testing of headers with no
libc dependencies to more environments (Thomas Weißschuh)
* Update gendwarfksyms documentation with required dependencies (Jihan
LIN)
* Reject invalid LLVM= values to avoid unintentionally falling back to
system toolchain (Thomas Weißschuh)
* Add a script to help run the kernel build process in a container for
consistent environments and testing (Guillaume Tucker)
* Simplify kallsyms by getting rid of the relative base (Ard Biesheuvel)
* Performance and usability improvements to scripts/make_fit.py (Simon
Glass)
* Minor various clean ups and fixes
Kconfig changes
===============
* Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
* Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR' (Nicolas Pitre, Graham Roff)
* Refactor merge_config.sh to use awk over shell/sed/grep, dramatically
speeding up processing large number of config fragments (Anders
Roxell, Mikko Rapeli)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaYpgQwAKCRAdayaRccAa
liOGAQCqMI42YMLqljFcPu3B/3f43xhDBCXAhquPBIMhbgt+aAEAmmo3uMLHKSRV
XZDKkq13HMMV3Zlmrn5Xk/tzk+hkwwk=
=WYl4
-----END PGP SIGNATURE-----
Merge tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nathan Chancellor:
"Kbuild:
- Drop '*_probe' pattern from modpost section check allowlist, which
hid legitimate warnings (Johan Hovold)
- Disable -Wtype-limits altogether, instead of enabling at W=2
(Vincent Mailhol)
- Improve UAPI testing to skip testing headers that require a libc
when CONFIG_CC_CAN_LINK is not set, opening up testing of headers
with no libc dependencies to more environments (Thomas Weißschuh)
- Update gendwarfksyms documentation with required dependencies
(Jihan LIN)
- Reject invalid LLVM= values to avoid unintentionally falling back
to system toolchain (Thomas Weißschuh)
- Add a script to help run the kernel build process in a container
for consistent environments and testing (Guillaume Tucker)
- Simplify kallsyms by getting rid of the relative base (Ard
Biesheuvel)
- Performance and usability improvements to scripts/make_fit.py
(Simon Glass)
- Minor various clean ups and fixes
Kconfig:
- Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
- Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR
(Nicolas Pitre, Graham Roff)
- Refactor merge_config.sh to use awk over shell/sed/grep,
dramatically speeding up processing large number of config
fragments (Anders Roxell, Mikko Rapeli)"
* tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (39 commits)
kbuild: remove dependency of run-command on config
scripts/make_fit: Compress dtbs in parallel
scripts/make_fit: Support a few more parallel compressors
kbuild: Support a FIT_EXTRA_ARGS environment variable
scripts/make_fit: Move dtb processing into a function
scripts/make_fit: Support an initial ramdisk
scripts/make_fit: Speed up operation
rust: kconfig: Don't require RUST_IS_AVAILABLE for rustc-option
MAINTAINERS: Add scripts/install.sh into Kbuild entry
modpost: Amend ppc64 save/restfpr symnames for -Os build
MIPS: tools: relocs: Ship a definition of R_MIPS_PC32
streamline_config.pl: remove superfluous exclamation mark
kbuild: dummy-tools: Add python3
scripts: kconfig: merge_config.sh: warn on duplicate input files
scripts: kconfig: merge_config.sh: use awk in checks too
scripts: kconfig: merge_config.sh: refactor from shell/sed/grep to awk
kallsyms: Get rid of kallsyms relative base
mips: Add support for PC32 relocations in vmlinux
Documentation: dev-tools: add container.rst page
scripts: add tool to run containerized builds
...
|
||
|
Linus Torvalds
|
38ef046544 |
sched_ext: Changes for v6.20
- Move C example schedulers back from the external scx repo to tools/sched_ext as the authoritative source. scx_userland and scx_pair are returning while scx_sdt (BPF arena-based task data management) is new. These schedulers will be dropped from the external repo. - Improve error reporting by adding scx_bpf_error() calls when DSQ creation fails across all in-tree schedulers. - Avoid redundant irq_work_queue() calls in destroy_dsq() by only queueing when llist_add() indicates an empty list. - Fix flaky init_enable_count selftest by properly synchronizing pre-forked children using a pipe instead of sleep(). -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaYo1pQ4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGa5VAP9udiGksQ4bBFQrUD+0yhuvjsSuXzssfdfxHgT6 Hj66wgEAjgbnSyxfcGrB+w7DWUxNLaZlXepibVMPcfvAaSieSgU= =UvLY -----END PGP SIGNATURE----- Merge tag 'sched_ext-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext updates from Tejun Heo: - Move C example schedulers back from the external scx repo to tools/sched_ext as the authoritative source. scx_userland and scx_pair are returning while scx_sdt (BPF arena-based task data management) is new. These schedulers will be dropped from the external repo. - Improve error reporting by adding scx_bpf_error() calls when DSQ creation fails across all in-tree schedulers - Avoid redundant irq_work_queue() calls in destroy_dsq() by only queueing when llist_add() indicates an empty list - Fix flaky init_enable_count selftest by properly synchronizing pre-forked children using a pipe instead of sleep() * tag 'sched_ext-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: selftests/sched_ext: Fix init_enable_count flakiness tools/sched_ext: Fix data header access during free in scx_sdt tools/sched_ext: Add error logging for dsq creation failures in remaining schedulers tools/sched_ext: add arena based scheduler tools/sched_ext: add scx_pair scheduler tools/sched_ext: add scx_userland scheduler sched_ext: Add error logging for dsq creation failures sched_ext: Avoid multiple irq_work_queue() calls in destroy_dsq() |
||
|
Linus Torvalds
|
ff661eeee2 |
cgroup: Changes for v6.20
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c.
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent.
- Fix partition effective CPUs overlap that caused a warning on cpuset
removal when sibling partitions shared CPUs.
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions.
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently,
and adding polling helpers for asynchronously updated cgroup
statistics.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaYozIw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGZQKAQD51KJQz4M79wf2yBhIBLOnM4aakMalhSwZNL4O
JiGutwD+Ir33VzNX8aXBuDin9p4wI15O54PhqSenJbelKRQ3Dws=
=gR7L
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent
- Fix partition effective CPUs overlap that caused a warning on
cpuset removal when sibling partitions shared CPUs
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently, and
adding polling helpers for asynchronously updated cgroup statistics
* tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: fix overlap of partition effective CPUs
cgroup: increase maximum subsystem count from 16 to 32
cgroup: Remove stale cpu.rt.max reference from documentation
cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held()
cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change()
cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict
cgroup/cpuset: Don't fail cpuset.cpus change in v2
cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier()
cgroup/cpuset: Streamline rm_siblings_excl_cpus()
cpuset: remove dead code in cpuset-v1.c
cpuset: remove v1-specific code from generate_sched_domains
cpuset: separate generate_sched_domains for v1 and v2
cpuset: move update_domain_attr_tree to cpuset_v1.c
cpuset: add cpuset1_init helper for v1 initialization
cpuset: add cpuset1_online_css helper for v1-specific operations
cpuset: add lockdep_assert_cpuset_lock_held helper
cpuset: Remove unnecessary checks in rebuild_sched_domains_locked
cgroup: switch to css_is_online() helper
selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants
selftests: cgroup: make test_memcg_sock robust against delayed sock stats
...
|
||
|
Linus Torvalds
|
9bdc64892d |
workqueue: Changes for v6.20
- Rework the rescuer to process work items one-by-one instead of slurping all pending work items in a single pass. As there is only one rescuer per workqueue, a single long-blocking work item could cause high latency for all tasks queued behind it, even after memory pressure is relieved and regular kworkers become available to service them. - Add CONFIG_BOOTPARAM_WQ_STALL_PANIC build-time option and workqueue.panic_on_stall_time parameter for time-based stall panic, giving systems more control over workqueue stall handling. - Replace BUG_ON() with panic() in the stall panic path for clearer intent and more informative output. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaYov/A4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGWXnAQCfyELl+evz3RdFhyTiVCM1TiOnC1TsBjgkm3SJ orMhwgEAkgg40jino34wgeZRfdIAThxQ1O6bsvTpooWKjlCYcQY= =zZCF -----END PGP SIGNATURE----- Merge tag 'wq-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue updates from Tejun Heo: - Rework the rescuer to process work items one-by-one instead of slurping all pending work items in a single pass. As there is only one rescuer per workqueue, a single long-blocking work item could cause high latency for all tasks queued behind it, even after memory pressure is relieved and regular kworkers become available to service them. - Add CONFIG_BOOTPARAM_WQ_STALL_PANIC build-time option and workqueue.panic_on_stall_time parameter for time-based stall panic, giving systems more control over workqueue stall handling. - Replace BUG_ON() with panic() in the stall panic path for clearer intent and more informative output. * tag 'wq-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: replace BUG_ON with panic in panic_on_wq_watchdog workqueue: add time-based panic for stalls workqueue: add CONFIG_BOOTPARAM_WQ_STALL_PANIC option workqueue: Process extra works in rescuer on memory pressure workqueue: Process rescuer work items one-by-one using a cursor workqueue: Make send_mayday() take a PWQ argument directly |
||
|
Thomas Gleixner
|
1e83ccd592 |
sched/mmcid: Don't assume CID is CPU owned on mode switch
Shinichiro reported a KASAN UAF, which is actually an out of bounds access
in the MMCID management code.
CPU0 CPU1
T1 runs in userspace
T0: fork(T4) -> Switch to per CPU CID mode
fixup() set MM_CID_TRANSIT on T1/CPU1
T4 exit()
T3 exit()
T2 exit()
T1 exit() switch to per task mode
---> Out of bounds access.
As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the
TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in
the task and drops the CID, but it does not touch the per CPU storage.
That's functionally correct because a CID is only owned by the CPU when
the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag.
Now sched_mm_cid_exit() assumes that the CID is CPU owned because the
prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the
not set ONCPU bit and then invokes clear_bit() with an insanely large
bit number because TRANSIT is set (bit 29).
Prevent that by actually validating that the CID is CPU owned in
mm_drop_cid_on_cpu().
Fixes:
|
||
|
Linus Torvalds
|
939faf71cf |
drm for 7.0-rc1
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors.
- Use pin_init::zeroed() for fops initialization.
- Annotate DRM helpers with __rust_helper.
- Improve safety documentation for gem::Object::new().
- Update AlwaysRefCounted imports.
- mm: Prevent integer overflow in page_align().
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switched to use virtual planes by default
- Fixed DSI CMD panels on DPU 3.x
- Rewrote format handling to remove intermediate representation
- Fixed watchdog on DPU 8.x+
- Fixed TE / Vsync source setting on DPU 8.x+
- Added 3D_Mux on SC7280
- Kaanapali platform support
- Fixed UBWC register programming
- Made RM reserve DSPP-enabled mixers for CRTCs with LMs.
- Gamma correction support
- DP:
- Enabled support for eDP 1.4+ link rate tables
- Fixed MDSS1 DP indices on SA8775P, making them to work
- Fixed msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Documented QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switched to divider_determine_rate()
- MDP5:
- Dropped support for MSM8998, SDM660 and SDM630 (switched over
to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation.
- Get rid of the Result<impl PinInit<T, E>> anti-pattern.
- Relocate initializer-specific code into the appropriate initializer.
- Use CStr::from_bytes_until_nul() to remove custom helpers.
- Improve handling of unexpected firmware values.
- Clean up redundant debug prints.
- Replace c_str!() with native Rust C-string literals.
- Update nova-core task list.
nova:
- Align GEM object size to system page size.
tyr:
- Use generated uAPI bindings for GpuInfo.
- Replace manual sleeps with read_poll_timeout().
- Replace c_str!() with native Rust C-string literals.
- Suppress warnings for unread fields.
- Fix incorrect register name in print statement.
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
-----BEGIN PGP SIGNATURE-----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=RFJ2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
|
||
|
Linus Torvalds
|
b7ef56a076 |
[GIT PULL for v7.0] media updates
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmmMWOIACgkQCF8+vY7k 4RXPxw/9F1tYWWaFMJS39mKK99sK5rXk+/ZfYr89k9S44iYQ1cDGp41Hx4SY1oki sZid8WKMzv5+YJL/IGUs8bESL+Dn5AYiOL04P2ITJjer7T2U9ZgTfj+OFfiEhIA5 hvebZoHtxo4HrlS7v++OB2t5ozgIsPDuM5YuqOKfxXETvbeeddPYoKqrCQ+JEqoE jTUd+wHM3PsY1GFl1RO2GhIz3hSfxE0a58fP8a6VDjN7qo9UFDtPcvDNb+BAP5or 87fesM52VuEw4pXR0/y0hXbyFWsFxIWNXO9uOTIyvSEHXQth58SJmFY7UyCYAO/t XVXcoSKH0WjLn6e1/QHy34dU4sKxK4zM+nDtfBx0IeMSkGj7tiPskQsFjlq/1uSS UP59vgQHOQk2bVER6sRTE4WVsp9XI2gOwS6vIwvUBfhIT6Of0iBAkYRhAp62Pu0a 3urAUj7/sRnghwF+QgBCrmuIYnfgF/gMmJR2TnhOo5bc6QGPN5vWL1sX521uXbWz F0iewntKx+iTeX3FQhcjuLSX7X3fqFo3+63bADOoZ08KD5r8ia/EWr1Yfrzs4Hno fyOP6U2Oobdg5hN+waqV1ZIJI0zGwl39P7Iuo7Qw6EgW3NDJV4VKK/Y+9HYamyvC NMXkREg4U4QXk7z+DJAdXzuupqolMiidabONWhqrW9QLzhA8Ak8= =oFw9 -----END PGP SIGNATURE----- Merge tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Add support for GMSL1 and GMSL‑coax modules (PCI mgb4) - Add driver for TI VIP - AV1 – first kernel support (pixel‑format, decoder, transcoder) - Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1) - Synopsys CSI‑2 receiver driver - Verisilicon & rkvdec – major fixes and enhancements - IPU6 (and 7) fixes and preparation for metadata - omap3isp: v4l2-compliance updates - Fix DVB streaming, drop wait_prepare/finish (dvb/vb2) * tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits) media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer media: uvcvideo: Fix allocation for small frame sizes media: uvcvideo: Return queued buffers on start_streaming() failure media: uvcvideo: Create an ID namespace for streaming output terminals media: rkvdec: Add HEVC support for the VDPU383 variant media: rkvdec: Add HEVC support for the VDPU381 variant media: rkvdec: Add H264 support for the VDPU383 variant media: rkvdec: Add H264 support for the VDPU381 variant media: rkvdec: Disable multicore support media: rkvdec: Enable all clocks without naming them media: rkvdec: Support per-variant interrupt handler media: rkvdec: Add RCB and SRAM support media: rkvdec: Add variant specific coded formats list media: rkvdec: Move hevc functions to common file media: rkvdec: Move h264 functions to common file media: rkvdec: Use structs to represent the HW RPS media: rkvdec: Move cabac tables to their own source file media: rkvdec: Switch to using structs instead of writel media: visl: Add HEVC short and long term RPS sets media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls ... |
||
|
Linus Torvalds
|
d061251387 |
sound updates for 7.0-rc1
It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual
-----BEGIN PGP SIGNATURE-----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=kfLN
-----END PGP SIGNATURE-----
Merge tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
|
||
|
Linus Torvalds
|
0d6dd4738d |
firewire updates for v7.0
This update includes the following changes.
- Refactor page allocation dedicated to 1394 OHCI IR/IT/AR DMA contexts
Although 1394 OHCI specification does not impose any restriction on
the memory size dedicated to these DMA contexts, 1394 OHCI PCI driver
allocates pages for convenience when mapping them into either kernel
space or userspace VMA. The driver previously used dma_alloc_pages()
for both page allocation and mapping creation, even though this kernel
API is rarely used. Following discussions questioning the page-oriented
kernel API in the DMA layer, the driver has been refactored to avoid
using this API. In addition, the use of private members in the
allocated pages has been removed following long-standing concern.
- Allocate variable-sized buffer for isochronous context header
1394 OHCI PCI driver previously allocated a single page for isochronous
context header. As a result, the buffer size for the header was fixed
to PAGE_SIZE, which imposed a limitation on IEC 61883-1/6 packet
streaming engine. Consequently, the ALSA PCM devices provided by
drivers for audio and music units in IEEE 1394 bus were constrained in
the maximum size of buffer period (64 ms in most cases). This limitation
is resolved by dynamically allocating the header buffer with an
arbitrary size.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaYv5twAKCRCsLtaWM8Lw
E8lKAQDFUprNC2Uygge9koT75sArhN6QQzZkPT/kK8aTcsWbeQEAwww148ck9fRF
LDlED0XFKuKLX5obpvxmY3hmQFWaKAs=
=6w+R
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
- Refactor page allocation dedicated to 1394 OHCI IR/IT/AR DMA contexts
Although 1394 OHCI specification does not impose any restriction on
the memory size dedicated to these DMA contexts, 1394 OHCI PCI driver
allocates pages for convenience when mapping them into either kernel
space or userspace VMA. The driver previously used dma_alloc_pages()
for both page allocation and mapping creation, even though this
kernel API is rarely used. Following discussions questioning the
page-oriented kernel API in the DMA layer, the driver has been
refactored to avoid using this API. In addition, the use of private
members in the allocated pages has been removed following
long-standing concern.
- Allocate variable-sized buffer for isochronous context header
1394 OHCI PCI driver previously allocated a single page for
isochronous context header. As a result, the buffer size for the
header was fixed to PAGE_SIZE, which imposed a limitation on IEC
61883-1/6 packet streaming engine. Consequently, the ALSA PCM devices
provided by drivers for audio and music units in IEEE 1394 bus were
constrained in the maximum size of buffer period (64 ms in most
cases). This limitation is resolved by dynamically allocating the
header buffer with an arbitrary size.
* tag 'firewire-updates-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire: remove PCM buffer size constraint from isoc context header
firewire: core: add fw_iso_context_create() variant with header storage size
firewire: core: provide isoc header buffer size outside card driver
firewire: ohci: allocate isoc context header by kvmalloc()
firewire: core: add flags member for isochronous context structure
firewire: ohci: use cleanup helper for isoc context header allocation
firewire: ohci: code refactoring to use union for isoc multiple channel state
firewire: ohci: refactor isoc single-channel state using a union
firewire: core: add function variants for isochronous context creation
firewire: ohci: fix index of pages for dma address to 1394 OHCI IT context
firewire: ohci: stop using page private to store DMA mapping address
firewire: ohci: split page allocation from dma mapping
firewire: ohci: use MAX macro to guarantee minimum count of pages for AR contexts
firewire: core: stop using page private to store DMA mapping address
firewire: core: use common kernel API to allocate and release a batch of pages
firewire: core: code refactoring with cleanup function for isoc pages
firewire: core: use mutex instead of spinlock for client isochronous context
firewire: core: move private function declaration from public header to internal header
|
||
|
Linus Torvalds
|
a31980dba7 |
hid-for-linus-2026020901
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEL65usyKPHcrRDEicpmLzj2vtYEkFAmmKDZsACgkQpmLzj2vt YEnwzA//dJ7jcPYLmDx/Rvm+g1GVc2cf6YYnyoGvFwiY1f/275ljKKrUe6JnFh3i xKuTOFCbWRZLBZmv7WF30Wv4lPz34TOX4C2jZUhBSf92NiPYjOfUscreV/8sVA7M FD9/pxy+YH0rBI9xD0REolFeAIMUpEjamObxKq38ouS+ioL+pt+/PRX3SbFji2mG TmQ41ShKVg3d87u/Wu2G4QaHKd54CksqX1b40OGKu2aZP0jhtD+7gYyDdoShBkXy gJz6HVW1GS2KUVBJYYyD6KTfkNgVFJc2l0S9SLbBvBTmUG9rIi6uFOZrpUdam3aP j7ObIOhNoj96mwoFaw3zIGH6Miw84BkytOEFg7pXoHLWUjKhkzNcitiZdaSEMkVH Z4NsCnRMsVyD4FZTOsf0fz47PDU3l6vNEvf13XMIG3ImbVXEJhF6Ulcn5N9umEdV kwsnmFXJ+F4PiEOjJdaIRTcebX2CDLCJwhRqh2w/ooTUR1/6ZBO3rYvIz/Yo/3wB zgu93Vc9pXbFP1BSRjJuJKhJhZtqwCaQuc+YYAvSqH8hRU3IXGY8st53bj/yjyb6 wKf4NO3Rmed/hrtUunOAh2VSoT4DO6CWeHBXqvQmtGIhNEX2iMiZlKcwZec/sWzm cfVMqUdXXKDoejC0AA2dGYXjKw3QzJXfAqNSIFRUv7s8GS9mbfw= =3MOq -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2026020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - global switch of HID drivers to use pm_*ptr instead of #ifdef CONFIG_PM* (Bastien Nocera) - support for new firmware handling in intel-ish-hid (Vishnu Sankar) - support for HID output reports in the Quicki2c in intel-thc (Even Xu) - solidify register configuration updates in intel-thc (Even Xu) - Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders) - fn lock and WMI fan control handling improvements in certain Asus models (ROG, ProArt P16) (Ionut Nechita, Connor Belli) - fix for potential NULL pointer dereference during warm reset in intel-ish-hid (Ryan Lin) - fix for potential NULL pointer derefence in probe error paths in hid-pl (Oliver Neukum) - various other small assorted fixes and new device ID additions / device-specific quirks * tag 'hid-for-linus-2026020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits) HID: sony: add dongle device IDs for CRKD Gibson SG HID: Intel-thc-hid: Intel-thc: Fix wrong register fields updating HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients HID: logitech-hidpp: Add support for Logitech K980 HID: logitech-dj: Differentiate "invalid device index" error HID: sony: Use pm_ptr instead of #ifdef CONFIG_PM HID: wacom: Use pm_ptr instead of #ifdef CONFIG_PM HID: uclogic: Use pm_ptr instead of #ifdef CONFIG_PM HID: hid-sensor-hub: Use pm_ptr instead of #ifdef CONFIG_PM HID: picolcd_core: Use pm_ptr instead of #ifdef CONFIG_PM HID: nintendo: Use pm_ptr instead of #ifdef CONFIG_PM HID: logitech-dj: Use pm_ptr instead of #ifdef CONFIG_PM HID: lenovo: Use pm_ptr instead of #ifdef CONFIG_PM HID: asus: Use pm_ptr instead of #ifdef CONFIG_PM HID: appletb-kbd: Use pm_ptr instead of #ifdef CONFIG_PM HID: hid-alps: Use pm_ptr instead of #ifdef CONFIG_PM HID: multitouch: add eGalaxTouch EXC3188 support HID: elecom: Add support for ELECOM HUGE Plus M-HT1MRBK HID: sony: add support for bluetooth Rock Band 4 PS4 guitars HID: logitech-hidpp: Check maxfield in hidpp_get_report_length() ... |
||
|
Linus Torvalds
|
532355a756 |
hwmon updates for v7.0
- New drivers
* PMBus driver for HiTRON HAC300S power supply
* PMBus Driver for Monolithic MP5926 Hot-Swap Controller
* PMBus Driver for STEF48H28 hot-swap controller
- Support for new chips in existing drivers
* asus-ec-sensors: Support for Pro WS TRX50-SAGE WIFI A and
ROG MAXIMUS X HERO
* dell-smm: Support for Dell OptiPlex 7080
* f71882fg: Support for F81968
* gpd-fan: Support for Micro PC 2
* nct6683: New customer ID for ASRock Z590 Taichi
* nct6775: Support for ASUS Pro WS WRX90E-SAGE SE
* sht3x: Support for SHT85
* tmp108: Support for P3T1035 and P3T2030
- Bug fixes
* ibmpex: Revert "fix" for UAF which didn't fix a UAF but introduced a
race condition resulting in a NULL pointer crash.
* pmbus/mpq8785: Fix failure to instantiate driver if the chip is
configured for VID mode
* max16065: Use READ/WRITE_ONCE to avoid compiler optimization induced
race
* nct7363, emc2305: Resource leak fixes
- Other notable changes
* cros_ec: Support for temperature limit thresholds
* coretemp: Add TjMax for Silvermont through Tremont Atoms
Various other minor improvements.
-----BEGIN PGP SIGNATURE-----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=CTbI
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New PMBus drivers:
- HiTRON HAC300S power supply
- Monolithic MP5926 Hot-Swap Controller
- STEF48H28 hot-swap controller
Support for new chips in existing drivers
- Support for Pro WS TRX50-SAGE WIFI A and ROG MAXIMUS X HERO
(asus-ec-sensors)
- Support for Dell OptiPlex 7080 (dell-smm)
- Support for F81968 (f71882fg)
- Support for Micro PC 2 (gpd-fan)
- New customer ID for ASRock Z590 Taichi (nct6683)
- Support for ASUS Pro WS WRX90E-SAGE SE (nct6775)
- Support for SHT85 (sht3x)
- Support for P3T1035 and P3T2030 (tmp108)
Bug fixes:
- Revert "fix" for UAF which didn't fix a UAF but introduced a race
condition resulting in a NULL pointer crash (ibmpex)
- Fix failure to instantiate driver if the chip is configured for VID
mode (pmbus/mpq8785)
- Use READ/WRITE_ONCE to avoid compiler optimization induced race
(max16065)
- Resource leak fixes (nct7363, emc2305)
Other notable changes:
- Support for temperature limit thresholds (cros_ec)
- Add TjMax for Silvermont through Tremont Atoms (coretemp)
Various other minor improvements"
* tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (42 commits)
hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
hwmon: (max16065) Use READ/WRITE_ONCE to avoid compiler optimization induced race
hwmon: (nct6775) use sysfs_emit instead of sprintf
hwmon: pmbus: fix table in STEF48H28 documentation
hwmon: Add support for HiTRON HAC300S PSU
dt-bindings: trivial-devices: Add hitron,hac300s
hwmon: (cros_ec) Add support for temperature thresholds
hwmon: (cros_ec) Move temperature channel params to a macro
hwmon: (cros_ec) Add support for fan target speed
hwmon: (cros_ec) Split up supported features in the documentation
hwmon: (tmp108) Add P3T1035 and P3T2030 support
hwmon: (tmp108) Add support for P3T1035 and P3T2030
dt-bindings: hwmon: ti,tmp108: Add P3T1035,P3T2030
hwmon: pmbus: add support for STEF48H28
dt-bindings: hwmon: add STEF48H28
hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin
hwmon: (emc2305) Fix a resource leak in emc2305_of_parse_pwm_child
hwmon: (gpd-fan) add support for Micro PC 2
hwmon: (coretemp) Add TjMax for Silvermont through Tremont Atoms
...
|