Hydis HV101HD1 is a 2-lane 1366x768 MIPI DSI panel found in ASUS VivoTab RT
TF600T tablet.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250717135752.55958-2-clamor95@gmail.com
Use dev_err_probe() helper as directed by core driver model to handle
driver probe error. Use standard helper defined at drivers/base/core.c
to maintain code consistency.
Inspired by,
commit a787e5400a ("driver core: add device probe log helper")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/aIJagJ/RnhSCtb2t@bhairav-test.ee.iitb.ac.in
There is a spelling mistake in the LEDS_BD2606MVV config. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250724112358.142351-1-colin.i.king@gmail.com
Samsung AMS561RA01 is an AMOLED panel, using the Samsung S6E8AA5X01 MIPI
DSI controller. Implement a basic panel driver for such panels.
The driver also initializes a backlight device, which works by changing
the panel's gamma values and aid brightness levels appropriately, with
the help of look-up tables acquired from downstream kernel sources.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250721-panel-samsung-s6e8aa5x01-v5-2-1a315aba530b@disroot.org
Samsung AMS561RA01 is an AMOLED panel, using the Samsung S6E8AA5X01 MIPI
DSI panel controller. Document the compatible and devicetree properties
of this hardware. It has a reset GPIO and two voltage regulators.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250721-panel-samsung-s6e8aa5x01-v5-1-1a315aba530b@disroot.org
Add support for the Olimex LCD-OLinuXino-5CTS, a 5-inch TFT LCD panel
with a mode operating at 33.3 MHz.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250702082230.1291953-2-paulk@sys-base.io
Add the Olimex LCD-OLinuXino-5CTS, a 5-inch TFT LCD panel.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250702082230.1291953-1-paulk@sys-base.io
Replace DRM_GPU_SCHED_STAT_NOMINAL with GPU_DRM_SCHED_STAT_RESET, in
accordance with commit 0a5dc1b67e ("drm/sched: Rename
DRM_GPU_SCHED_STAT_NOMINAL to DRM_GPU_SCHED_STAT_RESET")
Pass extra parameter to drm_sched_job_init, as required by commit
2956554823 ("drm/sched: Store the drm client_id in drm_sched_fence")
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://lore.kernel.org/r/20250802-fix-rockchip-npu-build-v1-1-fb0f0dacb3fe@brighamcampbell.com
Since commit 41b4b11da0 ("drm: Add valid clones check") setting
the `possible_clones` values is a hard requirement for cloning.
`vkms` supports cloning for writeback connectors in order to capture
CRTC content, however that broke with said commit.
Writeback connectors are created on a per-CRTC basis, thus mark
every non-writeback connector that is compatible with a given CRTC
as possible clone - and vice-versa.
Using a default configuration, the corresponding `drm_info` output
changes from:
├───Encoders
│ ├───Encoder 0
│ │ ├───Object ID: 40
│ │ ├───Type: virtual
│ │ ├───CRTCS: {0}
│ │ └───Clones: {0}
│ └───Encoder 1
│ ├───Object ID: 41
│ ├───Type: virtual
│ ├───CRTCS: {0}
│ └───Clones: {1}
into:
├───Encoders
│ ├───Encoder 0
│ │ ├───Object ID: 44
│ │ ├───Type: virtual
│ │ ├───CRTCS: {0}
│ │ └───Clones: {0, 1}
│ └───Encoder 1
│ ├───Object ID: 50
│ ├───Type: virtual
│ ├───CRTCS: {0}
│ └───Clones: {0, 1}
Fixes: dbd9d80c1b ("drm/vkms: Add support for writeback")
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20250718121442.490634-1-robert.mader@collabora.com
[fixed Fixes line and changed to: to into: to avoid checkpatch warnings]
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
SSD2825 is a cost-effective MIPI Bridge Chip solution targeting mainly
smartphones. It can convert 24bit RGB interface into 4-lane MIPI-DSI
interface to drive display modules of up to 800 x 1366, while supporting
AMOLED, a-si LCD or LTPS panel technologies for smartphone applications.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250730055424.6718-3-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add bindings for Solomon SSD2825 MIPI master bridge chip that connects an
application processor with traditional parallel LCD interface and an LCD
driver with MIPI slave interface. The SSD2825 supports both parallel RGB
interface and serial SPI interface.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250730055424.6718-2-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Update TODO item from drm documentation to contain more applicable
information regarding the removal of deprecated MIPI DSI functions and
no longer reference functions which have already been removed from the
kernel.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250722015313.561966-5-me@brighamcampbell.com
Remove the deprecated mipi_dsi_generic_write_seq() and
mipi_dsi_generic_write_chatty() functions now that they are no longer
used.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250722015313.561966-4-me@brighamcampbell.com
Fix bug in unprepare() which causes the function's return value to be
that of the last mipi "enter sleep mode" command.
Update driver to use the "multi" variant of MIPI functions in order to
facilitate improved error handling and remove the panel's dependency on
deprecated MIPI functions.
Use the new mipi_dsi_dual macro to reduce code duplication.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250722015313.561966-3-me@brighamcampbell.com
Create mipi_dsi_dual, mipi_dsi_dual_dcs_write_seq_multi, and
mipi_dsi_dual_generic_write_seq_multi macros for panels which are driven
by two parallel serial interfaces. This allows for the reduction of code
duplication in drivers for these panels.
Remove mipi_dsi_dual_dcs_write_seq_multi definition from
panel-novatek-nt36523.c to avoid the duplicate definition. Make novatek
driver pass mipi_dsi_context struct as a pointer.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250722015313.561966-2-me@brighamcampbell.com
The assignment to ts is missing on the call to ktime_to_timespec64.
Fix this by adding the missing assignment.
Fixes: db6a94b263 ("drm/vmwgfx: Implement dma_fence_ops properly")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250623223526.281398-1-colin.i.king@gmail.com
Add the bindings for the Neural Processing Unit IP from Rockchip.
v2:
- Adapt to new node structure (one node per core, each with its own
IOMMU)
- Several misc. fixes from Sebastian Reichel
v3:
- Split register block in its constituent subblocks, and only require
the ones that the kernel would ever use (Nicolas Frattaroli)
- Group supplies (Rob Herring)
- Explain the way in which the top core is special (Rob Herring)
v4:
- Change required node name to npu@ (Rob Herring and Krzysztof Kozlowski)
- Remove unneeded items: (Krzysztof Kozlowski)
- Fix use of minItems/maxItems (Krzysztof Kozlowski)
- Add reg-names to list of required properties (Krzysztof Kozlowski)
- Fix example (Krzysztof Kozlowski)
v5:
- Rename file to rockchip,rk3588-rknn-core.yaml (Krzysztof Kozlowski)
- Streamline compatible property (Krzysztof Kozlowski)
v6:
- Remove mention to NVDLA, as the hardware is only incidentally related
(Kever Yang)
- Mark pclk and npu clocks as required by all clocks (Rob Herring)
v7:
- Remove allOf section, not needed now that all nodes require 4 clocks
(Heiko Stübner)
v8:
- Remove notion of top core (Robin Murphy)
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-6-77ebd484941e@tomeuvizoso.net
The NPU cores have their own access to the memory bus, and this isn't
cache coherent with the CPUs.
Add IOCTLs so userspace can mark when the caches need to be flushed, and
also when a writer job needs to be waited for before the buffer can be
accessed from the CPU.
Initially based on the same IOCTLs from the Etnaviv driver.
v2:
- Don't break UABI by reordering the IOCTL IDs (Jeff Hugo)
v3:
- Check that padding fields in IOCTLs are zero (Jeff Hugo)
v6:
- Fix conversion logic to make sure we use DMA_BIDIRECTIONAL when needed
(Lucas Stach)
v8:
- Always sync BOs in both directions (Robin Murphy)
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-5-77ebd484941e@tomeuvizoso.net
Using the DRM GPU scheduler infrastructure, with a scheduler for each
core.
Userspace can decide for a series of tasks to be executed sequentially
in the same core, so SRAM locality can be taken advantage of.
The job submission code was initially based on Panfrost.
v2:
- Remove hardcoded number of cores
- Misc. style fixes (Jeffrey Hugo)
- Repack IOCTL struct (Jeffrey Hugo)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
- Use drm_* logging functions (Thomas Zimmermann)
- Rename reg i/o macros (Thomas Zimmermann)
- Add padding to ioctls and check for zero (Jeff Hugo)
- Improve error handling (Nicolas Frattaroli)
v6:
- Use mutexes guard (Markus Elfring)
- Use u64_to_user_ptr (Jeff Hugo)
- Drop rocket_fence (Rob Herring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Use reset lines to reset the cores (Robin Murphy)
- Use the macros to compute the values for the bitfields (Robin Murphy)
- More descriptive name for the IRQ (Robin Murphy)
- Simplify job interrupt handing (Robin Murphy)
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Specify the size of the embedded structs in the IOCTLs for future
extensibility (Rob Herring)
- Expose only 32 bits for the address of the regcmd BO (Robin Murphy)
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-4-77ebd484941e@tomeuvizoso.net
This uses the SHMEM DRM helpers and we map right away to the CPU and NPU
sides, as all buffers are expected to be accessed from both.
v2:
- Sync the IOMMUs for the other cores when mapping and unmapping.
v3:
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
v6:
- Use mutexes guard (Markus Elfring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Allocate DMA address ourselves with drm_mm (Robin Murphy)
- Use refcount_read (Heiko Stuebner)
- Remove superfluous dma_sync_sgtable_for_device (Robin Murphy)
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-3-77ebd484941e@tomeuvizoso.net
This initial version supports the NPU as shipped in the RK3588 SoC and
described in the first part of its TRM, in Chapter 36.
This NPU contains 3 independent cores that the driver can submit jobs
to.
This commit adds just hardware initialization and power management.
v2:
- Split cores and IOMMUs as independent devices (Sebastian Reichel)
- Add some documentation (Jeffrey Hugo)
- Be more explicit in the Kconfig documentation (Jeffrey Hugo)
- Remove resets, as these haven't been found useful so far (Zenghui Yu)
- Repack structs (Jeffrey Hugo)
- Use DEFINE_DRM_ACCEL_FOPS (Jeffrey Hugo)
- Use devm_drm_dev_alloc (Jeffrey Hugo)
- Use probe log helper (Jeffrey Hugo)
- Introduce UABI header in a later patch (Jeffrey Hugo)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
- Move registers header to its own commit (Thomas Zimmermann)
- Misc. cleanups (Thomas Zimmermann and Jeff Hugo)
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
- PM improvements (Nicolas Frattaroli)
v4:
- Use bulk clk API (Krzysztof Kozlowski)
v6:
- Remove mention to NVDLA, as the hardware is only incidentally related
(Kever Yang)
- Use calloc instead of GFP_ZERO (Jeff Hugo)
- Explicitly include linux/container_of.h (Jeff Hugo)
- pclk and npu clocks are now needed by all cores (Rob Herring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Kconfig: fix depends to be more explicit about Rockchip, and remove
superfluous selects (Robin Murphy)
- Use reset lines to reset the cores (Robin Murphy)
- Reference count the module
- Set dma_set_max_seg_size
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Remove notion of top core (Robin Murphy)
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-2-77ebd484941e@tomeuvizoso.net
A XML file was generated with the data from the TRM, and then this
header was generated from it.
The canonical location for the XML file is the Mesa3D repository.
v3:
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
v8:
- Remove full MIT license blob, to match other files with the same
licensing arrangement in the kernel
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-1-77ebd484941e@tomeuvizoso.net
Qualcomm is changing open source email address policy.
LKML and other busy mailing lists use the oss.qualcomm.com domain.
Signed-off-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721220811.962509-1-carl.vanderlip@oss.qualcomm.com
We would like to report them on gpu errors.
We choose to save the info on panthor_group_create rather than on
panthor_open because, when the two differ, we are more interested in the
task that created the group.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250718063816.1452123-3-olvaffe@gmail.com
It allows us to get rid of manual try_module_get / module_put.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250718063816.1452123-2-olvaffe@gmail.com
Add 50ms disable delay for NV116WHM-N49, NV122WUM-N41, and MNC207QS1-1
to satisfy T9+T10 timing. Add 50ms disable delay for MNE007JA1-2
as well, since MNE007JA1-2 copies the timing of MNC207QS1-1.
Specifically, it should be noted that the MNE007JA1-2 panel was added
by someone who did not have the panel documentation, so they simply
copied the timing from the MNC207QS1-1 panel. Adding an extra 50 ms
of delay should be safe.
Fixes: 0547692ac1 ("drm/panel-edp: Add several generic edp panels")
Fixes: 50625eab39 ("drm/edp-panel: Add panel used by T14s Gen6 Snapdragon")
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250723072513.2880369-1-yelangyan@huaqin.corp-partner.google.com
The bridge used in drm_bridge_connector_init() for CEC init does not
correctly point to the required HDMI CEC bridge, which can lead to
errors during CEC initialization.
Fixes: 65a2575a68 ("drm/display: bridge-connector: hook in CEC notifier support")
Fixes: a74288c8de ("drm/display: bridge-connector: handle CEC adapters")
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Closes: http://lore.kernel.org/r/20250718164156.194702d9@booty/
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250719-fix-cec-bridges-v1-1-a60b1333c87d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The bridge returned by drm_bridge_get_prev_bridge() is refcounted. Put it
when done.
select_bus_fmt_recursive() has several return points, and ensuring
drm_bridge_put() is always called in the right place would be error-prone
(especially with future changes to the select_bus_fmt_recursive() code) and
make code uglier. Instead use a scope-based free, which is future-proof and
a lot cleaner.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250709-drm-bridge-alloc-getput-drm_bridge_get_prev_bridge-v1-2-34ba6f395aaa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The device is managed so pci_free_irq_vectors() is called automatically
no need to do it manually.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/aHs8QAfUlFeNp7qL@pc
Enhance DRM_IOCTL_AMDXDNA_CREATE_BO to accept user space allocated
buffer pointer. The buffer pages will be pinned in memory. Unless
the CAP_IPC_LOCK is enabled for the application process, the total
pinned memory can not beyond rlimit_memlock.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250716164414.112091-1-lizhi.hou@amd.com
Many functions get a drm_bridge pointer, only use it in the function body
(or a smaller scope such as a loop body), and don't store it. In these
cases they always need to drm_bridge_put() it before returning (or exiting
the scope).
Some of those functions have complex code paths with multiple return points
or loop break/continue. This makes adding drm_bridge_put() in the right
places tricky, ugly and error prone in case of future code changes.
Others use the bridge pointer in the return statement and would need to
split the return line to fit the drm_bridge_put, which is a bit annoying:
-return some_thing(bridge);
+ret = some_thing(bridge);
+drm_bridge_put(bridge);
+return ret;
To make it easier for all of them to put the bridge reference correctly
without complicating code, define a scope-based cleanup action to be used
with __free().
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250708-drm-bridge-alloc-getput-drm_bridge_chain_get_first_bridge-v9-1-db1ba3df7f58@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This breaks on PREEMPT_RT, and should be unneeded since
lockdep can track irq disabled status itself.
Link: https://lore.kernel.org/r/20250715165919.33754-1-dev@lankhorst.se
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
For the MNB601LS1-4 panel, the T9+T10 timing does not meet the
requirements of the specification, so disable is set to 100ms.
Fixes: 9d8e91439f ("drm/panel-edp: Add CSW MNB601LS1-4")
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250721061627.3816612-1-yelangyan@huaqin.corp-partner.google.com
With the Opaque<T>, the expectations are that Rust should not
make any assumptions on the layout or invariants of the wrapped
C types. That runs rather counter to ioctl arguments, which must
adhere to certain data-layout constraints. By using Opaque<T>,
ioctl handlers are forced to use unsafe code where none is actually
needed. This adds needless complexity and maintenance overhead,
brining no safety benefits.
Drop the use of Opaque for ioctl arguments as that is not the best
fit here.
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250626162313.2755584-1-beata.michalska@arm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When bailing out due to group_priority_permit() failure, the queue_args
need to be freed. Fix it by rearranging the function to use the
goto-on-error pattern, such that the success case flows straight without
indentation while error cases jump forward to cleanup.
Cc: stable@vger.kernel.org
Fixes: 5f7762042f ("drm/panthor: Restrict high priorities on group_create")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241113-panthor-fix-gcq-bailout-v1-1-654307254d68@google.com
Currently the job free work item will lock sched->job_list_lock first time
to see if there are any jobs, free a single job, and then lock again to
decide whether to re-queue itself if there are more finished jobs.
Since drm_sched_get_finished_job() already looks at the second job in the
queue we can simply add the signaled check and have it return the presence
of more jobs to be freed to the caller. That way the work item does not
have to lock the list again and repeat the signaled check.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250716085117.56864-1-tvrtko.ursulin@igalia.com
The drm_gem ioctls were documented in internal file drm_gem.c
instead of uapi header drm.h. Move them there and change to
appropriate kerneldoc formatting.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250717143556.857893-3-David.Francis@amd.com
