This intends to have high coverage of the page table format functions and
the IOMMU implementation itself, exercising the various corner cases.
The kunit tests can be run in the kunit framework, using commands like:
tools/testing/kunit/kunit.py run --build_dir build_kunit_arm64 --arch arm64 --make_options LLVM=-19 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_uml --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_x86_64 --arch x86_64 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386 --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386pae --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig --kconfig_add CONFIG_X86_PAE=y
There are several interesting corner cases on the 32 bit platforms that
need checking.
Like the generic tests, these are run on the format's configuration list
using kunit "params". This also checks the core iommu parts of the page
table code as it enters the logic through a mock iommu_domain.
The following are checked:
- PT_FEAT_DYNAMIC_TOP properly adds levels one by one
- Every page size can be iommu_map()'d, and mapping creates that size
- iommu_iova_to_phys() works with every page size
- Test converting OA -> non present -> OA when the two OAs overlap and
free table levels
- Test that unmap stops at holes, unmap doesn't split, and unmap returns
the right values for partial unmap requests
- Randomly map/unmap. Checks map with random sizes, that map fails when
hitting collisions doing nothing, unmap/map with random intersections and
full unmap of random sizes. Also checks iommu_iova_to_phys() with random
sizes
- Check for memory leaks by monitoring NR_SECONDARY_PAGETABLE
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Replace the io_pgtable versions with pt_iommu versions. The v2 page table
uses the x86 implementation that will be eventually shared with VT-d.
This supports the same special features as the original code:
- increase_top for the v1 format to allow scaling from 3 to 6 levels
- non-present flushing
- Dirty tracking for v1 only
- __sme_set() to adjust the PTEs for CC
- Optimization for flushing with virtualization to minimize the range
- amd_iommu_pgsize_bitmap override of the native page sizes
- page tables allocate from the device's NUMA node
Rework the domain ops so that v1/v2 get their own ops. Make dedicated
allocation functions for v1 and v2. Hook up invalidation for a top change
to struct pt_iommu_flush_ops. Delete some of the iopgtable related code
that becomes unused in this patch. The next patch will delete the rest of
it.
This fixes a race bug in AMD's increase_address_space() implementation. It
stores the top level and top pointer in different memory, which prevents
other threads from reading a coherent version:
increase_address_space() alloc_pte()
level = pgtable->mode - 1;
pgtable->root = pte;
pgtable->mode += 1;
pte = &pgtable->root[PM_LEVEL_INDEX(level, address)];
The iommupt version is careful to put mode and root under a single
READ_ONCE and then is careful to only READ_ONCE a single time per
walk.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This is used by x86 CPUs and can be used in AMD/VT-d x86 IOMMUs. When a
x86 IOMMU is running SVA the MM will be using this format.
This implementation follows the AMD v2 io-pgtable version.
There is nothing remarkable here, the format can have 4 or 5 levels and
limited support for different page sizes. No contiguous pages support.
x86 uses a sign extension mechanism where the top bits of the VA must
match the sign bit. The core code supports this through
PT_FEAT_SIGN_EXTEND which creates and upper and lower VA range. All the
new operations will work correctly in both spaces, however currently there
is no way to report the upper space to other layers. Future patches can
improve that.
In principle this can support 3 page tables levels matching the 32 bit PAE
table format, but no iommu driver needs this. The focus is on the modern
64 bit 4 and 5 level formats.
Comparing the performance of several operations to the existing version:
iommu_map()
pgsz ,avg new,old ns, min new,old ns , min % (+ve is better)
2^12, 71,61 , 66,58 , -13.13
2^21, 66,60 , 61,55 , -10.10
2^30, 59,56 , 56,54 , -3.03
256*2^12, 392,1360 , 345,1289 , 73.73
256*2^21, 383,1159 , 335,1145 , 70.70
256*2^30, 378,965 , 331,892 , 62.62
iommu_unmap()
pgsz ,avg new,old ns, min new,old ns , min % (+ve is better)
2^12, 77,71 , 73,68 , -7.07
2^21, 76,70 , 70,66 , -6.06
2^30, 69,66 , 66,63 , -4.04
256*2^12, 225,899 , 210,870 , 75.75
256*2^21, 262,722 , 248,710 , 65.65
256*2^30, 251,643 , 244,634 , 61.61
The small -ve values in the iommu_unmap() are due to the core code calling
iommu_pgsize() before invoking the domain op. This is unncessary with this
implementation. Future work optimizes this and gets to 2%, 4%, 3%.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The iommufd self test uses an xarray to store the pfns and their orders to
emulate a page table. Make it act more like a real iommu driver by
replacing the xarray with an iommupt based page table. The new AMDv1 mock
format behaves similarly to the xarray.
Add set_dirty() as a iommu_pt operation to allow the test suite to
simulate HW dirty.
Userspace can select between several formats including the normal AMDv1
format and a special MOCK_IOMMUPT_HUGE variation for testing huge page
dirty tracking. To make the dirty tracking test work the page table must
only store exactly 2M huge pages otherwise the logic the test uses
fails. They cannot be broken up or combined.
Aside from aligning the selftest with a real page table implementation,
this helps test the iommupt code itself.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The iommufd self test uses an xarray to store the pfns and their orders to
emulate a page table. Slightly modify the amdv1 page table to create a
real page table that has similar properties:
- 2k base granule to simulate something like a 4k page table on a 64K
PAGE_SIZE ARM system
- Contiguous page support for every PFN order
- Dirty tracking
AMDv1 is the closest format, as it is the only one that already supports
every page size. Tweak it to have only 5 levels and an 11 bit base granule
and compile it separately as a format variant.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
This intends to have high coverage of the page table format functions, it
uses the IOMMU implementation to create a tree which it then walks through
and directly calls the generic page table functions to test them.
It is a good starting point to test a new format header as it is often
able to find typos and inconsistencies much more directly, rather than
with an obscure failure in the iommu implementation.
The tests can be run with commands like:
tools/testing/kunit/kunit.py run --build_dir build_kunit_arm64 --arch arm64 --make_options LLVM=-19 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_uml --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig --kconfig_add CONFIG_WERROR=n
tools/testing/kunit/kunit.py run --build_dir build_kunit_x86_64 --arch x86_64 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386 --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig
tools/testing/kunit/kunit.py run --build_dir build_kunit_i386pae --arch i386 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig --kconfig_add CONFIG_X86_PAE=y
There are several interesting corner cases on the 32 bit platforms that
need checking.
The format can declare a list of configurations that generate different
configurations the initialize the page table, for instance with different
top levels or other parameters. The kunit will turn these into "params"
which cause each test to run multiple times.
The tests are repeated to run at every table level to check that all the
item encoding formats work.
The following are checked:
- Basic init works for each configuration
- The various log2 functions have the expected behavior at the limits
- pt_compute_best_pgsize() works
- pt_table_pa() reads back what pt_install_table() writes
- range.max_vasz_lg2 works properly
- pt_table_oa_lg2sz() and pt_table_item_lg2sz() use a contiguous
non-overlapping set of bits from the VA up to the defined max_va
- pt_possible_sizes() and pt_can_have_leaf() produces a sensible layout
- pt_item_oa(), pt_entry_oa(), and pt_entry_num_contig_lg2() read back
what pt_install_leaf_entry() writes
- pt_clear_entry() works
- pt_attr_from_entry() reads back what pt_iommu_set_prot() &
pt_install_leaf_entry() writes
- pt_entry_set_write_clean(), pt_entry_make_write_dirty(), and
pt_entry_write_is_dirty() work
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
IOMMU HW now supports updating a dirty bit in an entry when a DMA writes
to the entry's VA range. iommufd has a uAPI to read and clear the dirty
bits from the tables.
This is a trivial recursive descent algorithm to read and optionally clear
the dirty bits. The format needs a function to tell if a contiguous entry
is dirty, and a function to clear a contiguous entry back to clean.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
map is slightly complicated because it has to handle a number of special
edge cases:
- Overmapping a previously shared, but now empty, table level with an OA.
Requries validating and freeing the possibly empty tables
- Doing the above across an entire to-be-created contiguous entry
- Installing a new shared table level concurrently with another thread
- Expanding the table by adding more top levels
Table expansion is a unique feature of AMDv1, this version is quite
similar except we handle racing concurrent lockless map. The table top
pointer and starting level are encoded in a single uintptr_t which ensures
we can READ_ONCE() without tearing. Any op will do the READ_ONCE() and use
that fixed point as its starting point. Concurrent expansion is handled
with a table global spinlock.
When inserting a new table entry map checks that the entire portion of the
table is empty. This includes freeing any empty lower tables that will be
overwritten by an OA. A separate free list is used while checking and
collecting all the empty lower tables so that writing the new entry is
uninterrupted, either the new entry fully writes or nothing changes.
A special fast path for PAGE_SIZE is implemented that does a direct walk
to the leaf level and installs a single entry. This gives ~15% improvement
for iommu_map() when mapping lists of single pages.
This version sits under the iommu_domain_ops as map_pages() but does not
require the external page size calculation. The implementation is actually
map_range() and can do arbitrary ranges, internally handling all the
validation and supporting any arrangment of page sizes. A future series
can optimize iommu_map() to take advantage of this.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
unmap_pages removes mappings and any fully contained interior tables from
the given range. This follows the now-standard iommu_domain API definition
where it does not split up larger page sizes into smaller. The caller must
perform unmap only on ranges created by map or it must have somehow
otherwise determined safe cut points (eg iommufd/vfio use iova_to_phys to
scan for them)
A future work will provide 'cut' which explicitly does the page size split
if the HW can support it.
unmap is implemented with a recursive descent of the tree. If the caller
provides a VA range that spans an entire table item then the table memory
can be freed as well.
If an entire table item can be freed then this version will also check the
leaf-only level of the tree to ensure that all entries are present to
generate -EINVAL. Many of the existing drivers don't do this extra check.
This version sits under the iommu_domain_ops as unmap_pages() but does not
require the external page size calculation. The implementation is actually
unmap_range() and can do arbitrary ranges, internally handling all the
validation and supporting any arrangment of page sizes. A future series
can optimize __iommu_unmap() to take advantage of this.
Freed page table memory is batched up in the gather and will be freed in
the driver's iotlb_sync() callback after the IOTLB flush completes.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
iova_to_phys is a performance path for the DMA API and iommufd, implement
it using an unrolled get_user_pages() like function waterfall scheme.
The implementation itself is fairly trivial.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
AMD IOMMU v1 is unique in supporting contiguous pages with a variable size
and it can decode the full 64 bit VA space. Unlike other x86 page tables
this explicitly does not do sign extension as part of allowing the entire
64 bit VA space to be supported.
The general design is quite similar to the x86 PAE format, except with a
6th level and quite different PTE encoding.
This format is the only one that uses the PT_FEAT_DYNAMIC_TOP feature in
the existing code as the existing AMDv1 code starts out with a 3 level
table and adds levels on the fly if more IOVA is needed.
Comparing the performance of several operations to the existing version:
iommu_map()
pgsz ,avg new,old ns, min new,old ns , min % (+ve is better)
2^12, 65,64 , 62,61 , -1.01
2^13, 70,66 , 67,62 , -8.08
2^14, 73,69 , 71,65 , -9.09
2^15, 78,75 , 75,71 , -5.05
2^16, 89,89 , 86,84 , -2.02
2^17, 128,121 , 124,112 , -10.10
2^18, 175,175 , 170,163 , -4.04
2^19, 264,306 , 261,279 , 6.06
2^20, 444,525 , 438,489 , 10.10
2^21, 60,62 , 58,59 , 1.01
256*2^12, 381,1833 , 367,1795 , 79.79
256*2^21, 375,1623 , 356,1555 , 77.77
256*2^30, 356,1338 , 349,1277 , 72.72
iommu_unmap()
pgsz ,avg new,old ns, min new,old ns , min % (+ve is better)
2^12, 76,89 , 71,86 , 17.17
2^13, 79,89 , 75,86 , 12.12
2^14, 78,90 , 74,86 , 13.13
2^15, 82,89 , 74,86 , 13.13
2^16, 79,89 , 74,86 , 13.13
2^17, 81,89 , 77,87 , 11.11
2^18, 90,92 , 87,89 , 2.02
2^19, 91,93 , 88,90 , 2.02
2^20, 96,95 , 91,92 , 1.01
2^21, 72,88 , 68,85 , 20.20
256*2^12, 372,6583 , 364,6251 , 94.94
256*2^21, 398,6032 , 392,5758 , 93.93
256*2^30, 396,5665 , 389,5258 , 92.92
The ~5-17x speedup when working with mutli-PTE map/unmaps is because the
AMD implementation rewalks the entire table on every new PTE while this
version retains its position. The same speedup will be seen with dirtys as
well.
The old implementation triggers a compiler optimization that ends up
generating a "rep stos" memset for contiguous PTEs. Since AMD can have
contiguous PTEs that span 2Kbytes of table this is a huge win compared to
a normal movq loop. It is why the unmap side has a fairly flat runtime as
the contiguous PTE sides increases. This version makes it explicit with a
memset64() call.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The existing IOMMU page table implementations duplicate all of the working
algorithms for each format. By using the generic page table API a single C
version of the IOMMU algorithms can be created and re-used for all of the
different formats used in the drivers. The implementation will provide a
single C version of the iommu domain operations: iova_to_phys, map, unmap,
and read_and_clear_dirty.
Further, adding new algorithms and techniques becomes easy to do across
the entire fleet of drivers and formats.
The C functions are drop in compatible with the existing iommu_domain_ops
using the IOMMU_PT_DOMAIN_OPS() macro. Each per-format implementation
compilation unit will produce exported symbols following the pattern
pt_iommu_FMT_map_pages() which the macro directly maps to the
iommu_domain_ops members. This avoids the additional function pointer
indirection like io-pgtable has.
The top level struct used by the drivers is pt_iommu_table_FMT. It
contains the other structs to allow container_of() to move between the
driver, iommu page table, generic page table, and generic format layers.
struct pt_iommu_table_amdv1 {
struct pt_iommu {
struct iommu_domain domain;
} iommu;
struct pt_amdv1 {
struct pt_common common;
} amdpt;
};
The driver is expected to union the pt_iommu_table_FMT with its own
existing domain struct:
struct driver_domain {
union {
struct iommu_domain domain;
struct pt_iommu_table_amdv1 amdv1;
};
};
PT_IOMMU_CHECK_DOMAIN(struct driver_domain, amdv1, domain);
To create an alias to avoid renaming 'domain' in a lot of driver code.
This allows all the layers to access all the necessary functions to
implement their different roles with no change to any of the existing
iommu core code.
Implement the basic starting point: pt_iommu_init(), get_info() and
deinit().
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add some general description and pull in the kdoc comments from the source
file to index most of the useful functions.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The generic API is intended to be separated from the implementation of
page table algorithms. It contains only accessors for walking and
manipulating the table and helpers that are useful for building an
implementation. Memory management is not in the generic API, but part of
the implementation.
Using a multi-compilation approach the implementation module would include
headers in this order:
common.h
defs_FMT.h
pt_defs.h
FMT.h
pt_common.h
IMPLEMENTATION.h
Where each compilation unit would have a combination of FMT and
IMPLEMENTATION to produce a per-format per-implementation module.
The API is designed so that the format headers have minimal logic, and
default implementations are provided if the format doesn't include one.
Generally formats provide their code via an inline function using the
pattern:
static inline FMTpt_XX(..) {}
#define pt_XX FMTpt_XX
The common code then enforces a function signature so that there is no
drift in function arguments, or accidental polymorphic functions (as has
been slightly troublesome in mm). Use of function-like #defines are
avoided in the format even though many of the functions are small enough.
Provide kdocs for the API surface.
This is enough to implement the 8 initial format variations with all of
their features:
* Entries comprised of contiguous blocks of IO PTEs for larger page
sizes (AMDv1, ARMv8)
* Multi-level tables, up to 6 levels. Runtime selected top level
* The size of the top table level can be selected at runtime (ARM's
concatenated tables)
* The number of levels in the table can optionally increase dynamically
during map (AMDv1)
* Optional leaf entries at any level
* 32 bit/64 bit virtual and output addresses, using every bit
* Sign extended addressing (x86)
* Dirty tracking
A basic simple format takes about 200 lines to declare the require inline
functions.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Tested-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Tested-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The IOMMU core attaches each device to a default domain on probe(). Then,
every new "attach" operation has a fundamental meaning of two-fold:
- detach from its currently attached (old) domain
- attach to a given new domain
Modern IOMMU drivers following this pattern usually want to clean up the
things related to the old domain, so they call iommu_get_domain_for_dev()
to fetch the old domain.
Pass in the old domain pointer from the core to drivers, aligning with the
set_dev_pasid op that does so already.
Ensure all low-level attach fcuntions in the core can forward the correct
old domain pointer. Thus, rework those functions as well.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The last gdev is the device that failed the __iommu_device_set_domain().
So, it doesn't need to be reverted, given it's attached to group->domain
already.
This is not a problem currently, since it's a simply re-attach. However,
the core will need to pass in the old domain to __iommu_device_set_domain
so the old domain pointers would be inconsistent between a failed device
and all its prior succeeded devices, as all the prior devices need to be
reverted.
Avoid the re-attach for the last gdev, by breaking before the revert.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The set_dev_pasid for a release domain never gets called anyhow. So, there
is no point in defining a separate release_domain from the blocked_domain.
Simply reuse the blocked_domain.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Following a coming core change to pass in the old domain pointer into the
attach_dev op and its callbacks, exynos_iommu_identity_attach() will need
this new argument too, which the release_device op doesn't provide.
Instead, the core provides a release_domain to attach to the device prior
to invoking the release_device callback. Thus, simply use that.
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Since the core now takes care of the require_direct case for the release
domain, simply use that via the release_domain op.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Generally an IOMMU driver should leave the translation as BLOCKED until the
translation entry is probed onto a struct device. When the struct device is
removed, the translation should be put back to BLOCKED.
Drivers that are able to work like this can set their release_domain to the
blocking domain, and the core code handles this work.
The exception is when the device has an IOMMU_RESV_DIRECT region, in which
case the OS should continuously allow translations for the given range. And
the core code generally prevents using a BLOCKED domain with this device.
Continue this logic for the device release and hoist some open coding from
drivers. If the device has dev->iommu->require_direct and the driver uses a
BLOCKED release_domain, override it to IDENTITY to preserve the semantics.
The only remaining required driver code for IOMMU_RESV_DIRECT should preset
an IDENTITY translation during early IOMMU startup for those devices.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
folio_nr_pages() is a faster helper function to get the number of pages when
NR_PAGES_IN_LARGE_FOLIO is enabled.
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4lRQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylROwCfXKoJX39yhNjPuNdqVLp5wW4+1LsAn3fd7x0E
9czT0dxL2IipOWrV1ZMj
=Gu5v
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4l4g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym2zACgq0WPUJl3X/5+M0sWs9rd4afh2TMAn1RlLJZE
1Qj5OIhSn1v5SfkLyqXf
=Wn6c
-----END PGP SIGNATURE-----
Merge tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4mow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykXPACfVp7KKDyM+10AxrV/xccYT53iUaAAoMQEWvES
/0acQXalH6XunybjHkOd
=cBYS
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4nSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yliXgCfZzBRNhHGVV0gQrBy2dz9owzfhLQAoISf3He8
dwzYP7TSYXungxfq9dSL
=NaGG
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
a Clang build
- Make sure a Retbleed mitigation message is printed only when necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256 check is
needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which supports
assignable counters but where L3 total and local bandwidth monitoring has
been disabled at boot
-----BEGIN PGP SIGNATURE-----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=EZGc
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
subsystem after a rework
-----BEGIN PGP SIGNATURE-----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=oIwu
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
- Add one more Rust noreturn function to objtool's list
-----BEGIN PGP SIGNATURE-----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=d4ht
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
throttled otherwise task movement and manipulation would lead to dangling
cfs_rq references and an eventual crash
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmj+Cf0ACgkQEsHwGGHe
VUqkvA/8D1ItoOslMeTpD6YtcaNN9oxzQ7Zow1QaWaPqirUsc+2l/zZ/3R5s0Zlt
9n0mUNdZ6EC03ZGPwYCNVLk2PvTywmMdwXOypya303PXLez2bPigekJIyXJeW5FV
YuJWTJBQWtZwiFf2ekP1OmHRceOA4KuBIwmWvfW4YwdXlUGfDLn+X6a4z8GsH/z+
ss8iUTfbEraBoFFaF16xq1zxrvRDw5vZpX2HkcHADiTVdkHcuXrf+33AeW/URWKz
FrwimiW+HJdue9trFNwLKUggHCPDoUpHLPA/kmWFiGCZWRXBPpmZ56NGRgfoadGa
4/Hb9ASMjMFl8Y9gnkOqLyomhQ8vJ8LkNqDChiJ5AiQQFYRekrPuZw+zuCENtzVZ
miAmp/kXCGSCWTMNZKlztxJGhmn/yiH+sVegmyHyDqGfqnuEBF3sebkf/DDkDAvu
88SG1YB8OlgmDIxShhfHQqw1nZa7BshLkViak6110n4fP6fbZrbY0MwBLHX2VVpQ
jJeFuvQ2pZuEl1LKVDsy+ROIShkQITZ8IOeabnm6vAeHEpjomDvmlZOmc5f9NfHV
wH6SmrHzSaEam70EJflzoglujYy+JMtVIUd7QC/jYXtPOYj1fcHPgwqlnv25uW9e
4IrwjFNwc2u0MAemKcqRO4DUEwAczD0y+dL/6eVKK8niVmat4f8=
=8MbE
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
- In Device::parent(), do not make any assumptions on the device
context of the parent device.
- Check visibility before changing ownership of a sysfs attribute
group.
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL().
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs.
- Do not warn about a pending fw_devlink sync state.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaPyrfAAKCRBFlHeO1qrK
LoXVAP9tGeaWsoQgYUSBDZAGysWqwzar0xl27IOe40Mgg6xWDgEAmzPHt6KeQS7d
XhwHeFVRyQ8e04tPSlhI7qSLdeLLiwo=
=ID4F
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- In Device::parent(), do not make any assumptions on the device
context of the parent device
- Check visibility before changing ownership of a sysfs attribute
group
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs
- Do not warn about a pending fw_devlink sync state
* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending
A small collection of FireWire fixes. This includes collections to sparse
and API documentation.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaPyn7gAKCRCsLtaWM8Lw
E1n9AQDZQBuY7/WiMS6GoIfCpyqwnpLG7xaMIofoLzrBD2DR/AD+PD683h4bjO5P
Th4pjtrlUtgmnvchmtCzZYaQUvMbAwk=
=IipF
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"A small collection of FireWire fixes. This includes corrections to
sparse and API documentation"
* tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: init_ohci1394_dma: add missing function parameter documentation
firewire: core: fix __must_hold() annotation
Several RISC-V fixes for v6.18-rc3:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant macro
-----BEGIN PGP SIGNATURE-----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=g9cN
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaPyVuAAKCRBcsMJ8RxYu
Y7ctAYDUsUnEuqhD2kvGhED6GXXUv1Ibl6vliCqBUbTkaKpXAq1QJrJBYrpwiAh+
AVQyUoQBgNDi6zY1Ej85luZQEQCpTz6e9Z81Kwq5tBiCQz512SdmtluuzLJhkIt1
BCbAS69DMg==
=z2aZ
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
-----BEGIN PGP SIGNATURE-----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=6x96
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
Clang is not happy with set but unused variable (this is visible
with `make W=1` build:
kernel/sched/sched.h:3744:18: error: variable 'cpumask' set but not used [-Werror,-Wunused-but-set-variable]
It seems like the variable was never used along with the assignment
that does not have side effects as far as I can see. Remove those
altogether.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- drm_panic: bunch of size calculation fixes
- pantor: fix kernel panic on partial gpu va unmap
- rockchip: hdmi hotplug setup fix
- amdgpu: dp mst, dc/display fixes
- i915: fix panic structure leak
- xe: madvise uapi fix, wq alloc error, vma flag handling fix
-----BEGIN PGP SIGNATURE-----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=EjON
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Simona Vetter:
"Very quiet, all just small stuff and nothing scary pending to my
knowledge:
- drm_panic: bunch of size calculation fixes
- pantor: fix kernel panic on partial gpu va unmap
- rockchip: hdmi hotplug setup fix
- amdgpu: dp mst, dc/display fixes
- i915: fix panic structure leak
- xe: madvise uapi fix, wq alloc error, vma flag handling fix"
* tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Check return value of GGTT workqueue allocation
drm/amd/display: use GFP_NOWAIT for allocation in interrupt handler
drm/amd/display: increase max link count and fix link->enc NULL pointer access
drm/amd/display: Fix NULL pointer dereference
drm/panic: Fix 24bit pixel crossing page boundaries
drm/panic: Fix divide by 0 if the screen width < font width
drm/panic: Fix kmsg text drawing rectangle
drm/panic: Fix qr_code, ensure vmargin is positive
drm/panic: Fix overlap between qr code and logo
drm/panic: Fix drawing the logo on a small narrow screen
drm/xe/uapi: Hide the madvise autoreset behind a VM_BIND flag
drm/xe: Retain vma flags when recreating and splitting vmas for madvise
drm/i915/panic: fix panic structure allocation memory leak
drm/panthor: Fix kernel panic on partial unmap of a GPU VA region
drm/rockchip: dw_hdmi: use correct SCLIN mask for RK3228
-----BEGIN PGP SIGNATURE-----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=UcX7
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add DWC custom pci_ops for the root bus instead of overwriting the
DBI base address, which broke drivers that rely on the DBI address
for iATU programming; fixes an FU740 probe regression (Krishna
Chaitanya Chundru)
- Revert qcom ECAM enablement, which is rendered unnecessary by the DWC
custom pci_ops (Krishna Chaitanya Chundru)
- Fix longstanding MIPS Malta resource registration issues to avoid
exposing them when the next commit fixes the boot failure (Maciej W.
Rozycki)
- Use pcibios_align_resource() on MIPS Malta to fix boot failure caused
by using the generic pci_enable_resources() (Ilpo Järvinen)
- Enable only ASPM L0s and L1, not L1 PM Substates, for devicetree
platforms because we lack information required to configure L1
Substates; fixes regressions on powerpc and rockchip. A qcom
regression (L1 Substates no longer enabled) remains and will be
addressed next (Bjorn Helgaas)
* tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
MIPS: Malta: Use pcibios_align_resource() to block io range
MIPS: Malta: Fix PCI southbridge legacy resource reservations
MIPS: Malta: Fix keyboard resource preventing i8042 driver from registering
Revert "PCI: qcom: Prepare for the DWC ECAM enablement"
PCI: dwc: Use custom pci_ops for root bus DBI vs ECAM config access
Add missing kernel-doc parameter descriptions for five functions
in init_ohci1394_dma.c to fix documentation warnings when building
with W=1.
This patch addresses the following warnings:
- init_ohci1394_wait_for_busresets: missing @ohci description
- init_ohci1394_enable_physical_dma: missing @ohci description
- init_ohci1394_reset_and_init_dma: missing @ohci description
- init_ohci1394_controller: missing @num, @slot, @func descriptions
- setup_ohci1394_dma: missing @opt description
Tested with GCC 13.2.0 and W=1 flag. All documentation warnings
for these functions have been resolved.
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://lore.kernel.org/r/20251024203219.101990-2-nirbhay.lkd@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Avoid some false-positive KMSAN warnings by restoring the dependency of
the architecture-optimized Poly1305 code on !KMSAN.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaPvOAhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK9HxAQDpK0Js70YuHIbtRJIiLJSD13uYqc5z
UbHWSve7c6nIkwD+IVNcHZ04t4iiYCf1v7txPQa/vrJP3RpvrFIeSvSs5A8=
=f+r4
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Avoid some false-positive KMSAN warnings by restoring the dependency
of the architecture-optimized Poly1305 code on !KMSAN"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: poly1305: Restore dependency of arch code on !KMSAN
-----BEGIN PGP SIGNATURE-----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=AS5A
-----END PGP SIGNATURE-----
Merge tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- add missing tracepoints
- smbdirect (RDMA) fix
- fix potential issue with credits underflow
- rename fix
- improvement to calc_signature and additional cleanup patch
* tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: #include cifsglob.h before trace.h to allow structs in tracepoints
cifs: Call the calc_signature functions directly
smb: client: get rid of d_drop() in cifs_do_rename()
cifs: Fix TCP_Server_Info::credits to be signed
cifs: Add a couple of missing smb3_rw_credits tracepoints
smb: client: allocate enough space for MR WRs and ib_drain_qp()
-----BEGIN PGP SIGNATURE-----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=Zqjz
-----END PGP SIGNATURE-----
Merge tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix dma alignment for PI
- Fix selinux bogosity with nbd, where sendmsg would get rejected
* tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: require LBA dma_alignment when using PI
nbd: override creds to kernel when calling sock_{send,recv}msg()
-----BEGIN PGP SIGNATURE-----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=1UMr
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Add MAINTAINERS entry for zcrx, mostly so that netdev gets
automatically CC'ed by default on any changes there too.
- Fix for the SQPOLL busy vs work time accounting.
It was using getrusage(), which was both broken from a thread point
of view (we only care about the SQPOLL thread itself), and vastly
overkill as only the systime was used. On top of that, also be a bit
smarter in when it's queried. It used excessive CPU before this
change. Marked for stable as well.
- Fix provided ring buffer auto commit for uring_cmd.
- Fix a few style issues and sparse annotation for a lock.
* tag 'io_uring-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix buffer auto-commit for multishot uring_cmd
io_uring: correct __must_hold annotation in io_install_fixed_file
io_uring zcrx: add MAINTAINERS entry
io_uring: Fix code indentation error
io_uring/sqpoll: be smarter on when to update the stime usage
io_uring/sqpoll: switch away from getrusage() for CPU accounting
io_uring: fix incorrect unlikely() usage in io_waitid_prep()
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmj7Wb0bFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiaXgoH/RvZHUHzvACGosCOb2uc
YVKIkxmPd3Feww+0oyQox+/BrBdri1eZ93Vfsl/udX7ZT5NBwC/pWT40SJUvyO+M
fICYdoM/f+Qkknja7FSVuQXho252JPZYZ37erFeB3J+lardHyPOMMjWX2YnRQZvW
EUwyKUH31DJnVa2IN9R1tT64ulY79KGmeMiSdQxaQc8SSM5idZ7/sQHjz4UcbOh1
kLsh3EQOgvVegzefLiTgKkcwT8Lry92X3bjeOrdvTqInDZj1aZWMDlQSFb31+XbS
1aeCrl3PpnD8EeEo7MIVmDzEAM4c2z4tYzpOVDa8rglkL7IRLwpK7t4DzK+zZhqq
e0Q=
=Y2Sq
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Two fixes for race conditions in obj_exts allocation (Hao Ge)
- Fix for slab accounting imbalance due to deferred slab decativation
(Vlastimil Babka)
* tag 'slab-for-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: Fix obj_ext mistakenly considered NULL due to race condition
slab: fix slab accounting imbalance due to defer_deactivate_slab()
slab: Avoid race on slab->obj_exts in alloc_slab_obj_exts
- Fix handling of GICv5 ITS MSI properties on platforms with
'msi-parent' as well as a of_node refcounting fix. This is also
preparation for further refactoring in 6.19 to use common DT parsing
of MSI properties.
-----BEGIN PGP SIGNATURE-----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=u/tb
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix handling of GICv5 ITS MSI properties on platforms with
'msi-parent' as well as a of_node refcounting fix.
This is also preparation for further refactoring in 6.19 to use
common DT parsing of MSI properties.
* tag 'devicetree-fixes-for-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Export of_msi_xlate() for module usage
of/irq: Fix OF node refcount in of_msi_get_domain()
of/irq: Add msi-parent check to of_msi_xlate()
The main change this time is an update to the MAINTAINERS file,
listing Krzysztof Kozlowski, Alexandre Belloni, and Linus Walleij as
additional maintainers for the SoC tree, in order to go back to a group
maintainership. Drew Fustini joins as an additional reviewer for the
SoC tree.
Thanks to all of you for volunteering to help out.
On the actual bugfixes, we have a few correctness changes for firmware
drivers (qtee, arm-ffa, scmi) and two devicetree fixes for Raspberry Pi.
-----BEGIN PGP SIGNATURE-----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=pc4V
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main change this time is an update to the MAINTAINERS file,
listing Krzysztof Kozlowski, Alexandre Belloni, and Linus Walleij as
additional maintainers for the SoC tree, in order to go back to a
group maintainership. Drew Fustini joins as an additional reviewer for
the SoC tree.
Thanks to all of you for volunteering to help out.
On the actual bugfixes, we have a few correctness changes for firmware
drivers (qtee, arm-ffa, scmi) and two devicetree fixes for Raspberry
Pi"
* tag 'soc-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: officially expand maintainership team
firmware: arm_scmi: Fix premature SCMI_XFER_FLAG_IS_RAW clearing in raw mode
firmware: arm_scmi: Skip RAW initialization on failure
include: trace: Fix inflight count helper on failed initialization
firmware: arm_scmi: Account for failed debug initialization
ARM: dts: broadcom: rpi: Switch to V3D firmware clock
arm64: dts: broadcom: bcm2712: Define VGIC interrupt
firmware: arm_ffa: Add support for IMPDEF value in the memory access descriptor
tee: QCOMTEE should depend on ARCH_QCOM
tee: qcom: return -EFAULT instead of -EINVAL if copy_from_user() fails
tee: qcom: prevent potential off by one read
A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmj7d0kACgkQJNaLcl1U
h9DNGgf+KWDwiPttn2gYGm4h5uEDix23aO7FOaRTAoFihWDaqvCz4V+wukRqdRE2
eyxfwQmupdQV+X+/a+ufBnQfHerHUjt2MUxZgBQTMgZ+JwFYVAtiyJszuCPw7LJH
h88UUIhQhkbtshDScNIzwTaEZ7ZMubULKIayxuweHIV0tToTrDpra5WQbMzApcyb
chvfY15sVncZizGxxgfdkFgK4MjKWzDzQNws4ik4XBq+aIX/AxgndoV8wgQW7pyq
CXNsYWE70J9n+pSqBFpSSlEYvOlx/Tca4s342rRZyY7lKZHwq3PkhhGqp4BsQcMj
t6+mpgdgmhQpT6fu42RxHM40y/XfWA==
=3b9V
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
