commit 5f2958052c ("igc: Add basic skeleton for PTP") added basic
support for PTP, what's missing is support for suspending.
Legacy power management has been added. Now we can add
the suspend method to the igc_shutdown.
By cleaning the runtime storage for timestamp this avoids a possible
invalid memory access when the system comes back from suspend state.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Added support for a device id that is a part of the Intel Tiger Lake
platform.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fix the typo and comment to correspond to the i225 device
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add devices ID's for the next LOM generations that will be
available on the next Intel Client platform (Alder Lake)
This patch provides the initial support for these devices
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Placeholder for debugging functionality.
In this patch, we add some registers and rings summary dumps.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
commit 9513d2a5dc ("igc: Add legacy power management support")
Add power management resume and schedule suspend requests.
Add power management get and put synchronization.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fix sparse warning:
drivers/net/ethernet/intel/igc/igc_ptp.c:512:6:
warning: symbol 'igc_ptp_tx_work' was not declared. Should it be static?
drivers/net/ethernet/intel/igc/igc_ptp.c:644:6:
warning: symbol 'igc_ptp_suspend' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The driver may sleep while holding a spinlock.
The function call path (from bottom to top) in Linux 4.19 is:
drivers/net/ethernet/intel/e1000e/mac.c, 1366:
usleep_range in e1000e_get_hw_semaphore
drivers/net/ethernet/intel/e1000e/80003es2lan.c, 322:
e1000e_get_hw_semaphore in e1000_release_swfw_sync_80003es2lan
drivers/net/ethernet/intel/e1000e/80003es2lan.c, 197:
e1000_release_swfw_sync_80003es2lan in e1000_release_phy_80003es2lan
drivers/net/ethernet/intel/e1000e/netdev.c, 4883:
(FUNC_PTR) e1000_release_phy_80003es2lan in e1000e_update_phy_stats
drivers/net/ethernet/intel/e1000e/netdev.c, 4917:
e1000e_update_phy_stats in e1000e_update_stats
drivers/net/ethernet/intel/e1000e/netdev.c, 5945:
e1000e_update_stats in e1000e_get_stats64
drivers/net/ethernet/intel/e1000e/netdev.c, 5944:
spin_lock in e1000e_get_stats64
drivers/net/ethernet/intel/e1000e/mac.c, 1384:
usleep_range in e1000e_get_hw_semaphore
drivers/net/ethernet/intel/e1000e/80003es2lan.c, 322:
e1000e_get_hw_semaphore in e1000_release_swfw_sync_80003es2lan
drivers/net/ethernet/intel/e1000e/80003es2lan.c, 197:
e1000_release_swfw_sync_80003es2lan in e1000_release_phy_80003es2lan
drivers/net/ethernet/intel/e1000e/netdev.c, 4883:
(FUNC_PTR) e1000_release_phy_80003es2lan in e1000e_update_phy_stats
drivers/net/ethernet/intel/e1000e/netdev.c, 4917:
e1000e_update_phy_stats in e1000e_update_stats
drivers/net/ethernet/intel/e1000e/netdev.c, 5945:
e1000e_update_stats in e1000e_get_stats64
drivers/net/ethernet/intel/e1000e/netdev.c, 5944:
spin_lock in e1000e_get_stats64
(FUNC_PTR) means a function pointer is called.
To fix these bugs, usleep_range() is replaced with udelay().
These bugs are found by a static analysis tool STCheck written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The following warning suggests there is a missing cpu_to_le64() in
the e1000_flush_tx_ring() function (it is also the behaviour
elsewhere in the driver to do cpu_to_le64() on the buffer_addr
when setting it)
drivers/net/ethernet/intel/e1000e/netdev.c:3813:30: warning: incorrect type in assignment (different base types)
drivers/net/ethernet/intel/e1000e/netdev.c:3813:30: expected restricted __le64 [usertype] buffer_addr
drivers/net/ethernet/intel/e1000e/netdev.c:3813:30: got unsigned long long [usertype] dma
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Introduce "rx" prefix in the name scheme for xdp counters
on rx path.
Differentiate between XDP_TX and ndo_xdp_xmit counters
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham says:
====================
octeontx2-af: Cleanup changes
These patches cleanup AF driver by removing unnecessary function
exports and cleanup repititive logic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cleanedup repititive nixlf and blkaddr retrieving logic
is various mailbox handlers throughout the rvu_nix.c file.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the CGX register config is restricted to mapped RVU PFs,
this patch cleans up these permission checks spread across
the rvu_cgx.c file by moving the checks to a common fn().
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since CGX driver and AF driver are built into a single module
the export symbols in CGX driver are not needed. This patch
gets rid of them.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This series adds two moderate updates and some misc small patches to
mlx5 driver.
1) From Aya, Add the missing devlink health dump callbacks support for
both rx and tx health reporters.
First patch of the series is extending devlink API to set binary fmsg
data.
All others patches in the series are adding the mlx5 devlink health
callbacks support and the needed FW commands.
2) Also from Aya, Support for FEC modes based on 50G per lane links.
Part of this series, Aya adds one missing link mode define "FEC_LLRS"
to include/uapi/linux/ethtool.h.
3) From Joe, Use proper logging and tracing line terminations
4) From Christophe, Remove a useless 'drain_workqueue()'
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl5MqMsACgkQSD+KveBX
+j4nWgf9F+GVLr5WgTkRKcPEM26kATtSyO8tqbiCGr4dG1f/mt8P1WBKjJ8cJToW
o67sJ/r+6uetS8SEWn0LloBSdsI3AHhId1phkFBJzEht9OlanpPeYqHSkB3CkeMr
xI5wj1JElf7RSliVDJ70UfY1AdlzFioQzegG4G5lNsvkNq6nUDHDOROV109z2ZR5
M0tXUfNHdt7w9+vLjijwR37I8OkpD7P2AAkQlAGxL0hgBMXfle2PaOVkxJqqI8Al
EFNhgxbEbEKKQ+mdGrehCsVho+i9EIOuSOox3/DzNvJ8ecYKnZrULeDDZNAF7mOu
dNA+8cEZWzHSnk1i/FSEA5nbo34odg==
=UJxG
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2020-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
This series adds two moderate updates and some misc small patches to
mlx5 driver.
1) From Aya, Add the missing devlink health dump callbacks support for
both rx and tx health reporters.
First patch of the series is extending devlink API to set binary fmsg
data.
All others patches in the series are adding the mlx5 devlink health
callbacks support and the needed FW commands.
2) Also from Aya, Support for FEC modes based on 50G per lane links.
Part of this series, Aya adds one missing link mode define "FEC_LLRS"
to include/uapi/linux/ethtool.h.
3) From Joe, Use proper logging and tracing line terminations
4) From Christophe, Remove a useless 'drain_workqueue()'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
'destroy_workqueue()' already calls 'drain_workqueue()', there is no need
to call it explicitly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Introduce new FEC modes:
- RS-FEC-(544,514)
- LL_RS-FEC-(272,257+1)
Add support in ethtool for set and get callbacks for the new modes
above. While RS-FEC-(544,514) is mapped to exsiting RS FEC mode,
LL_RS-FEC-(272,257+1) is mapped to a new ethtool link mode: LL-RS.
Add support for FEC on 50G per lane link modes up to 400G. The new link
modes uses a u16 fields instead of u8 fields for the legacy link modes.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add support for low latency Reed Solomon FEC as LLRS.
The LL-FEC is defined by the 25G/50G ethernet consortium,
in the document titled "Low Latency Reed Solomon Forward Error Correction"
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
CC: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
FEC mode is per link type, not necessary per speed. This patch access
FEC register by link modes instead of speeds. This patch will allow
further enhacment of link modes supporting FEC with the same speed
(different lane type).
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Ethtool advertise supported link modes on an interface. Per each FEC
mode, query if there is a link type which supports it. If so, add this
FEC mode to the supported FEC modes list. Prior to this patch, ethtool
advertised only the supported FEC modes on the current link type.
Add an explicit mapping between internal FEC modes and ethtool link mode
bits. With this change, adding new FEC modes in the downstream patch
would be easier.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Ethtool command allow setting of several FEC modes in a single set
command. The driver can only set a single FEC mode at a time. With this
patch driver will reply not-supported on setting several FEC modes.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When configuring FEC mode, driver tries to set it for all available
link types. If a link type doesn't support a FEC mode, set this link
type to auto (FW best effort). Prior to this patch, when a link type
didn't support a FEC mode is was set to no FEC.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
netdev_err should use newline termination but mlx5_health_report
is used in a trace output function devlink_health_report where
no newline should be used.
Remove the newlines from a couple formats and add a format string
of "%s\n" to the netdev_err call to not directly output the
logging string.
Also use snprintf to avoid any possible output string overrun.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Assemble all the API's to ease insertion of dump callbacks in the
following patches in the set.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
On driver load:
- Initialize resource dump data structure and memory access tools (mkey
& pd).
- Read the resource dump's menu which contains the FW segment
identifier. Each record is identified by the segment name (ASCII).
During the driver's course of life, users (like reporters) may request
dumps per segment. The user should create a command providing the
segment identifier (SW enumeration) and command keys. In return, the
user receives a command context. In order to receive the dump, the user
should supply the command context and a memory (aligned to a PAGE) on
which the dump content will be written. Since the dump may be larger
than the given memory, the user may resubmit the command until received
an indication of end-of-dump. It is the user's responsibility to destroy
the command.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add a new API for start/end binary array brackets [] to force array
around binary data as required from JSON. With this restriction, re-open
API to set binary fmsg data.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Instead of assigning skb = segments before the loop, just pass
segments directly as the first argument to skb_list_walk_safe().
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After performing an unbind/bind operation the network is no longer
functional on i.MX6 (which has a single FEC instance):
# echo 2188000.ethernet > /sys/bus/platform/drivers/fec/unbind
# echo 2188000.ethernet > /sys/bus/platform/drivers/fec/bind
[ 10.756519] pps pps0: new PPS source ptp0
[ 10.792626] libphy: fec_enet_mii_bus: probed
[ 10.799330] fec 2188000.ethernet eth0: registered PHC device 1
# udhcpc -i eth0
udhcpc: started, v1.31.1
[ 14.985211] fec 2188000.ethernet eth0: no PHY, assuming direct connection to switch
[ 14.993140] libphy: PHY fixed-0:00 not found
[ 14.997643] fec 2188000.ethernet eth0: could not attach to PHY
On SoCs with two FEC instances there are some cases where one FEC instance
depends on the other one being present. One such example is i.MX28, which
has the following FEC dependency as noted in the comments:
/*
* The i.MX28 dual fec interfaces are not equal.
* Here are the differences:
*
* - fec0 supports MII & RMII modes while fec1 only supports RMII
* - fec0 acts as the 1588 time master while fec1 is slave
* - external phys can only be configured by fec0
*
* That is to say fec1 can not work independently. It only works
* when fec0 is working. The reason behind this design is that the
* second interface is added primarily for Switch mode.
*
* Because of the last point above, both phys are attached on fec0
* mdio interface in board design, and need to be configured by
* fec0 mii_bus.
*/
Prevent the unbind operation to avoid these issues.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/amazon/ena/ena_com.c: In function ena_com_hash_key_allocate:
drivers/net/ethernet/amazon/ena/ena_com.c:1070:50:
warning: variable hash_key set but not used [-Wunused-but-set-variable]
commit 6a4f7dc82d ("net: ena: rss: do not allocate key when not supported")
introduced this, but not used, so remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that the phylib module loading issue has been resolved, we can
allow this PHY driver to be built as a module.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: patches 2020-02-17
here are patches for SMC making termination tasks more perfect.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
IB event handlers schedule the port event worker for further
processing of port state changes. This patch reduces the number of
schedules to avoid duplicate processing of the same port change.
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_lgr_terminate() and smc_lgr_terminate_sched() both result in soft
link termination, smc_lgr_terminate_sched() is scheduling a worker for
this task. Take out complexity by always using the termination worker
and getting rid of smc_lgr_terminate() completely.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The soft parameter of smc_lgr_terminate() is not used and obsolete.
Remove it.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When 2 callers call smc_lgr_terminate() at the same time
for the same lgr, one gets the lgr_lock and deletes the lgr from the
list and releases the lock. Then the second caller gets the lock and
tries to delete it again.
In smc_lgr_terminate() add a check if the link group lgr is already
deleted from the link group list and prevent to try to delete it a
second time.
And add a check if the lgr is marked as freeing, which means that a
termination is already pending.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_tx_rdma_write() is called under the send_lock and should not call
smc_lgr_terminate() directly. Call smc_lgr_terminate_sched() instead
which schedules a worker.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smc_lgr_cleanup() is called during termination processing, there is no
need to send a DELETE_LINK at that time. A DELETE_LINK should have been
sent before the termination is initiated, if needed.
And remove the extra call to wake_up(&lnk->wr_reg_wait) because
smc_llc_link_inactive() already calls the related helper function
smc_wr_wakeup_reg_wait().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Reduce dependency between bridge and router code
This patch set reduces the dependency between the bridge and the router
code in preparation for RTNL removal from the route insertion path in
mlxsw.
The motivation and solution are explained in detail in patch #3. The
main idea is that we need to stop special-casing the VXLAN devices with
regards to the reference counting of the FIDs. Otherwise, we can bump
into the situation described in patch #3, where the routing code calls
into the bridge code which calls back into the routing code. After
adding a mutex to protect router data structures to remove RTNL
dependency, this can result in an AA deadlock.
Patches #1 and #2 are preparations. They convert the FIDs to use
'refcount_t' for reference counting in order to catch over/under flows
and add extack to the bridge creation function.
Patches #3-#5 reduce the dependency between the bridge and the router
code. First, by having the VXLAN device take a reference on the FID in
patch #3 and then by removing unnecessary code following the change in
patch #3.
Patches #6-#10 adjust existing selftests and add new ones to exercise
the new code paths.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when two VXLAN tunnels with conflicting configurations (i.e.,
different TTL) are enslaved to the same VLAN-aware bridge, then the
enslavement of a port to the bridge is denied.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After recent changes, the VXLAN tunnel will be offloaded regardless if
any local ports are member in the FID or not. Adjust the test to make
sure the tunnel is offloaded in this case.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver supports a single VLAN-aware bridge. Test that the
enslavement of a port to the second VLAN-aware bridge fails with an
extack.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that creation of a bridge (both VLAN-aware and VLAN-unaware) fails
with an extack when a VXLAN device with an unsupported configuration is
already enslaved to it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
