The 1152MHz frequency entry for the a53 currently selects a multiplier of 62, giving 1190MHz. This changes the mulitiplier to 60 giving the intended 1152MHz.
Signed-off-by: Phillip Varney <pbvarney@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 0c6ab1b8f8 ("clk: qcom: Add A53 PLL support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260605005502.313928-1-pbvarney@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This GDSC requires an interconnect path to be enabled, otherwise the
GDSC will be stuck on 'off' and can't be enabled.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260501-milos-camcc-icc-v2-4-bb83c1256cc3@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On newer SoCs like Milos the CAMSS_TOP_GDSC power domains requires the
enablement of the multimedia NoC, otherwise the GDSC will be stuck on
'off'.
Add support for getting an interconnect path as specified in the SoC
clock driver, and enabling/disabling that interconnect path when the
GDSC is being enabled/disabled.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260501-milos-camcc-icc-v2-3-bb83c1256cc3@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document an interconnect path for camcc which needs to be enabled so
that the CAMSS_TOP_GDSC power domain can turn on successfully.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260501-milos-camcc-icc-v2-2-bb83c1256cc3@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Users can use devm version of of_icc_get_by_index() to benefit from
automatic resource release.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20260501-milos-camcc-icc-v2-1-bb83c1256cc3@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the camera clock controller for camera clients to
be able to request for camcc clocks on X1P42100 platform. Although
X1P42100 is derived from X1E80100, the camera clock controller driver
differs significantly. Few PLLs, clocks and GDSC's are removed, there
is delta in frequency tables for most RCG's and parent data structures
also changed for few RCG's. Hence introduce a separate camcc driver
for X1P42100 platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-5-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for camera QDSS debug clocks on X1E80100 platform which
are required to be voted for camera icp and cpas usecases. This change
aligns the camcc driver to the new ABI exposed from X1E80100 camcc
bindings that supports these camcc QDSS debug clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Fixes: 76126a5129 ("clk: qcom: Add camcc clock driver for x1e80100")
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-4-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the video clock controller for video clients to be
able to request for videocc clocks on X1P42100 platform. Although
X1P42100 is derived from X1E80100, the video clock controller differs
significantly. The BSE clocks are newly added, several cdiv clocks have
been removed, and most RCG frequency tables have been updated. Initial
PLL configurations also require changes, hence introduce a separate
videocc driver for X1P42100 platform.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-3-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add X1P42100 camera clock controller support and clock bindings
for camera QDSS debug clocks which are applicable for both X1E80100
and X1P42100 platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-2-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the video clock controller on Qualcomm
X1P42100 (Purwa) SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-1-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Expose the USB2 PHY reset in order to enable adding the USB nodes in DTS
for Nord.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-nord-clk-usb2-phy-v2-2-17a86cb307c3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Provide the USB2 PHY reset definition in dt-bindings for the Nord negcc
module in order to enable adding the USB nodes in DTS.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260518-nord-clk-usb2-phy-v2-1-17a86cb307c3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some VRMs aren't present on all boards, so mark them as optional. This
prevents probe failures on boards where not all VRMs are present.
This resolves an issue seen on the Nothing Phone (4a) Pro (Eliza) where
probe fails due to RPMH_RF_CLK5 not being present on the board, this is
due to this device having a slightly different PMIC configuration from
the Eliza MTP.
This matches the downstream approach of marking all VRMs as optional
and makes the previous clka_optional handling redundant.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260414-clk-rpmh-vrm-opt-v3-1-8ca21469ffbc@pm.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the global clock controller (GCC) on the
Qualcomm Hawi SoC.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-clk-hawi-v3-7-530b538679f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add clock operations and register offsets to enable control of the Taycan
EHA_T PLL, allowing for proper configuration and management of the PLL.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-clk-hawi-v3-6-530b538679f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the TCSR clock controller found on the Qualcomm Hawi SoC.
This controller provides reference clocks for various peripherals
including PCIe, UFS, and USB.
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-clk-hawi-v3-5-530b538679f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the global clock controller on the
Qualcomm Hawi SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Mike Tipton <mike.tipton@oss.qualcomm.com>
Signed-off-by: Vivek Aknurwar <vivek.aknurwar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260506-clk-hawi-v3-3-530b538679f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Just like most of Qualcomm clock controllers, we can reference common
qcom,gcc.yaml schema to unify the common parts of the binding. This
also adds the '#reset-cells' property which is permitted for the
SM6125 SoC clock controllers, but not listed as a valid property.
Fixes: bb4d28e377 ("arm64: dts: qcom: sm6125: Add missing MDSS core reset")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603150629.GYoouFwZ-lkp@intel.com/
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260330-ginkgo-add-usb-ir-vib-v3-2-c4b778b0d7f8@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CMN PLL in IPQ5332 SoC produces different output clocks when compared
to IPQ9574. While most clock outputs match IPQ9574, the ethernet PHY/switch
(50 Mhz) and PPE clocks (200 Mhz) in IPQ5332 are different.
Add IPQ5332-specific clock definitions and of_device_id entry.
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-qcom_ipq5332_cmnpll-v2-3-f9f7e4efbd79@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clk_cmn_pll_recalc_rate() function must account for the reference clock
divider programmed in CMN_PLL_REFCLK_CONFIG. Without this fix, platforms
with a reference divider other than 1 calculate incorrect CMN PLL rates.
For example, on IPQ5332 where the reference divider is 2, the computed rate
becomes twice the actual output.
Read CMN_PLL_REFCLK_DIV and divide the parent rate by this value before
applying the 2 * FACTOR scaling. This yields the correct rate calculation:
rate = (parent_rate / ref_div) * 2 * factor.
Maintain backward compatibility with earlier platforms (e.g. IPQ9574,
IPQ5424, IPQ5018) that use ref_div = 1.
Fixes: f81715a4c8 ("clk: qcom: Add CMN PLL clock controller driver for IPQ SoC")
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260106-qcom_ipq5332_cmnpll-v2-1-f9f7e4efbd79@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the CMN PLL block in IPQ5332 SoC, which shares
similarities with IPQ9574 but has different output clock frequencies.
Add a new header file to export CMN PLL output clock specifiers for IPQ5332
SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260106-qcom_ipq5332_cmnpll-v2-2-f9f7e4efbd79@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The binding does not reference any other schema, thus should use
"additionalProperties: false" to disallow any undocumented properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260404105436.138110-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The static 'struct qcom_cc_driver_data' and array 'xxx_critical_cbcrs'
are already treated by common.c code as pointers to const, so constify
few remaining pieces.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429170859.247165-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GXCLKCTL (Graphics GX Clock Controller) is a block dedicated to managing
clocks for the GPU subsystem on GX power domain. The GX clock controller
driver manages only the GX GDSC and the rest of the resources of the
controller are managed by the firmware.
We can use the existing kaanapali driver for Milos as well since the
GX_CLKCTL_GX_GDSC supported by the Linux driver requires the same
configuration.
Reviewed-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260417-milos-gxclkctl-v3-2-08f5988c43a2@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm GX(graphics) is a clock controller which has PLLs, clocks and
Power domains (GDSC), but the requirement from the SW driver is to use
the GDSC power domain from the clock controller to recover the GPU
firmware in case of any failure/hangs. The rest of the resources of the
clock controller are being used by the firmware of GPU. This module
exposes the GDSC power domains which helps the recovery of Graphics
subsystem.
Milos can reuse the qcom,kaanapali-gxclkctl.h header due to similarity
of the hardware block, and also reuse of the Linux driver.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260417-milos-gxclkctl-v3-1-08f5988c43a2@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----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=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEh0E3p4c3JKeBvsLGB1IKcBYmEmkFAmntFCcACgkQB1IKcBYm
Emk/XA//Qzg66EHUmdBncFmN9cT+44QYp2N4cs7pYWiZbeYJ4vPmEVJJNQ0NKHLR
PX+7nvNb0AExnQuCbphoCuhwHwXQdRBE2TogGqDlUjDnRZzgDUtIjeHx96c+G6aV
RiMRWI84qctYj8P2O4zwJclwtojMktL9Ar6epMXScWVEYeYN5hnMcHYOeHqYJ8y1
wzRf+fLdtnRuw+wofph1875udripjrKuIPWMp9QoRaqJXax5qGgasI2m3IQP1klr
1KsqEo7dNtmliviTDMzqrs4ZkA63f9CPgw1qctO3YvEEXXgi137IDnbfTXlVH643
bIvy4d5Y2iu4FvcepAH0vuKQdbHB9CL8FLMBZEZdQEMz1fivVeu5hPMTCxC3pTq0
YrKs7bE49qFyVlHjcawXU/Nm97mtsEpKOEOG4C19vwVtoS46Iv1avCkVrHQLWzIi
nVJ01uPyQYRLngAJ/RKxI2NHP52/Kvtzz/z+SQoqJb5F4Dz1vp67cFKRkKVcH7cm
cCYfmJ8AxcBeT45GrfX9a9T7LtuyUx0lDNZbm2DEFYa4uqweg0QgAlWc4Z9WtbQ7
Ye9WJI6yyLr0e5xDCbcnhMNVQL8hGMbxleVvNYG8sRp5T9otpnp2WVvouRyjjvzm
f6GuKxNdM/eA68pjnBvGfp1sHwp/IVi3yrSbM88T3Jf91JedBEE=
=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode
-----BEGIN PGP SIGNATURE-----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=mY/t
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
mentioning separately: Rafael's commit converting tpm_crb from ACPI driver
to a platform driver. Starting from this release cycle, the branch with TPM
changes mirrored to next is 'for-next-tpm', and patches for keys have their
own separate 'for-next-keys' branch.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaezVbgAKCRAaerohdGur
0ggHAQDmhaZ2C3ddAV1WjfXh1YqdWAmqEqoP7ZHAh4OrjyRPTQD+Pc4xl9TSOgHx
/9WzzV6AM6fL5RuC2/PO5RvOKF9mswc=
=tpJM
-----END PGP SIGNATURE-----
Merge tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736a ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Several development updates for 7.1-rc1:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmnrfHEACgkQ9OeQG+St
rGTtMA/+JmEQuVvtJ4ZJ+PhFYdI/VVPTpTwf4tP1dhlLEKaeX4vzlw09+mW/dYeM
jH65rkQ3wcLC4gRH7ZI1SRMm6n0lAf0ROLjpwagd+4U+xnhLCmIHxo8FM2v3Rmyl
34WnCmWitiEtUN41t0EfbUBxDoX5pV42vpPkYIdnQtLkjObCcXsVFMhegBPCTfp2
UOozgH7yNlkFwWEOCEacNne22MmAheOU0R4Jb/OiFAaE3z4i/9+nFoHd7NCKpmDf
hgWaOalg+jsclxn5kyE0KbraP7Uvx44eX8OeQk1rdvL+F9ItGFXtXKD7FUUj+71/
S5yHT3YrRYvAEM1GDKAieZhVWFxKPm5osnlJwrrrnfLWR7JvwrsU7SGS8FqSsqqf
i/Ie5rY1hV9faXJikY8MDSzKC7gwdX0wtZ8JZanZtGwFlPvI17oaE4K3hbiD13Dk
WIJpd7kfYEWG0SjWtyrW1E2plqy3lfVN4MZfjW2ID18uo0PwVtgE5GFf/HFGxugN
WLV+/DhSkc40EUC4bVflWDLtnJYhsQYCJoHwZXVI8YpNK+tShia0BVCSj+Llv8Tv
f33Ae7IARZad+ty2MsTW1oG0zcIjHI8A4OIoRfbRwf3z9Bs8S3o6chlTOi7YYV5y
fbSxCg9AIYRcUZ0ACsnrIgrVd/YF57FD8AvJ/BHvTm7nVTeoLKY=
=arB6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of
the saved ring buffer. This is because the ring buffer being read by
user space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other accounting
as well. On boot up, the "reader page" is accounted for but a rewind may
put it back into the buffer and then the reader page may be accounted
for again.
Save off the original reader page and skip accounting it when scanning
the pages in the ring buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaevLRxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsNBAQCO9T+3kbDLD/DxRBYjeMXhTg2iY2OV
SHV9jEzcYTahmwEAqVCFY9sNxVYXait/C924SmHCSi1N0HrIuEzIEd29iwk=
=bv+t
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of the
saved ring buffer. This is because the ring buffer being read by user
space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other
accounting as well. On boot up, the "reader page" is accounted for
but a rewind may put it back into the buffer and then the reader page
may be accounted for again.
Save off the original reader page and skip accounting it when
scanning the pages in the ring buffer.
* tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not double count the reader_page
-----BEGIN PGP SIGNATURE-----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=0AP+
-----END PGP SIGNATURE-----
Merge tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Series for zloop, fixing a variety of issues
- t10-pi code cleanup
- Fix for a merge window regression with the bio memory allocation mask
- Fix for a merge window regression in ublk, caused by an issue with
the maple tree iteration code at teardown
- ublk self tests additions
- Zoned device pgmap fixes
- Various little cleanups and fixes
* tag 'block-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (21 commits)
Revert "floppy: fix reference leak on platform_device_register() failure"
ublk: avoid unpinning pages under maple tree spinlock
ublk: refactor common helper ublk_shmem_remove_ranges()
ublk: fix maple tree lockdep warning in ublk_buf_cleanup
selftests: ublk: add ublk auto integrity test
selftests: ublk: enable test_integrity_02.sh on fio 3.42
selftests: ublk: remove unused argument to _cleanup
block: only restrict bio allocation gfp mask asked to block
block/blk-throttle: Add WQ_PERCPU to alloc_workqueue users
block: Add WQ_PERCPU to alloc_workqueue users
block: relax pgmap check in bio_add_page for compatible zone device pages
block: add pgmap check to biovec_phys_mergeable
floppy: fix reference leak on platform_device_register() failure
ublk: use unchecked copy helpers for bio page data
t10-pi: reduce ref tag code duplication
zloop: remove irq-safe locking
zloop: factor out zloop_mark_{full,empty} helpers
zloop: set RQF_QUIET when completing requests on deleted devices
zloop: improve the unaligned write pointer warning
zloop: use vfs_truncate
...
-----BEGIN PGP SIGNATURE-----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=YZdX
-----END PGP SIGNATURE-----
Merge tag 'io_uring-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Fix for a NOMMU bug with io_uring, where NOMMU doesn't grab page refs
at mmap time. NOMMU also has entirely broken FOLL_PIN support, yet
here we are
- A few fixes covering minor issues introduced in this merge window
- data race annotation to shut up KCSAN for when io-wq limits are
applied
- A nospec addition for direct descriptor file updating. Rest of the
direct descriptor path already had this, but for some reason the
update did not. Now they are all the same
- Various minor defensive changes that claude identified and suggested
terrible fixes for, turned into actually useful cleanups:
- Use kvfree() for the imu cache. These can come from kmalloc or
vmalloc depending on size, but the in-cache ones are capped
where it's always kmalloc based. Change to kvfree() in the
cleanup path, making future changes unlikely to mess that up
- Negative kbuf consumption lengths. Can't happen right now, but
cqe->res is used directly, which if other codes changes could
then be an error value
- Fix for an issue with the futex code, where partial wakes on a
vectored fuxes would potentially wake the same futex twice, rather
than move on to the next one. This could confuse an application as it
would've expected the next futex to have been woken
- Fix for a bug with ring resizing, where SQEs or CQEs might not have
been copied correctly if large SQEs or CQEs are used in the ring.
Application side issue, where SQEs or CQEs might have been lost
during resize
- Fix for a bug where EPOLL_URING_WAKE might have been lost, causing a
multishot poll to not be terminated when it's nested, like it should
have been
- Fix for an issue with signed comparison of poll references for the
slow path
- Fix for a user struct UAF in the zcrx code
- Two minor zcrx cleanups
* tag 'io_uring-7.1-20260424' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: take page references for NOMMU pbuf_ring mmaps
io_uring/poll: ensure EPOLL_ONESHOT is propagated for EPOLL_URING_WAKE
io_uring/zcrx: warn on freelist violations
io_uring/zcrx: clear RQ headers on init
io_uring/zcrx: fix user_struct uaf
io_uring/register: fix ring resizing with mixed/large SQEs/CQEs
io_uring/futex: ensure partial wakes are appropriately dequeued
io_uring/rw: add defensive hardening for negative kbuf lengths
io_uring/rsrc: use kvfree() for the imu cache
io_uring/rsrc: unify nospec indexing for direct descriptors
io_uring: fix spurious fput in registered ring path
io_uring: fix iowq_limits data race in tctx node addition
io_uring/tctx: mark io_wq as exiting before error path teardown
io_uring/tctx: check for setup tctx->io_wq before teardown
io_uring/poll: fix signed comparison in io_poll_get_ownership()
